Transmission Accessories — Page 19

T5 Series Timing Pulleys

T5 Series Timing Pulleys

T5 series timing pulleys are designed for T5 tooth-profile timing belts with a 5 mm pitch. Available in a range of tooth counts and lengths, with pulley profiles including A-type and F-type to suit different drive requirements. Typically made of aluminum alloy or steel, they can also be surface-treated. Widely used for precision power transmission in automation equipment, machine tools, packaging machinery, and other applications.

T5 timing belt

T5 timing belt

The JAGUAR T5 timing belt has trapezoidal teeth and a 5mm pitch. Designed for light- to medium-load synchronous drives, it is commonly paired with T5 timing pulleys and widely used in packaging machinery, printing equipment, office automation equipment, textile machinery, and various small drive mechanisms. The catalog uses the pitch length (mm) as the model suffix. Pitch lengths range from 150~1620mm, corresponding to 30~324 teeth, with the relationship: number of teeth = pitch length ÷ 5. The designation consists of the model (5mm pitch) + timing belt pitch length code (mm). Belt width is indicated separately by a width code; the code shown in the catalog is 10 (meaning a belt width of 10mm). These are standard products with short lead times and can be selected directly by pitch length, tooth count, and belt width. Other timing belt tooth profiles, including AT5 and AT10, are listed on the same page but are not part of this series.

T5/T10/T20 Series Polyurethane Open-Ended/Joined Belts

T5/T10/T20 Series Polyurethane Open-Ended/Joined Belts

This series of polyurethane open-ended/joined belts is designed primarily for conveying and synchronous drive applications. The belt ends can be joined to form a continuous loop. The range includes three tooth pitches: T5 (5 mm), T10 (10 mm), and T20 (20 mm). Available in white or black, with steel or Kevlar cords for a balance of strength and flexibility. Maximum standard widths are 450 mm for T5/T10 and 150 mm for T20; the standard roll length is 100 m. Length tolerance is ±0.5 mm/m. Thickness tolerance is ±0.2 mm for T5/T10 and ±0.4 mm for T20. Optional features include fabric on the tooth side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), a cover coating, double-sided teeth, and an integrated guide strip, to suit different friction, wear-resistance, and guiding requirements.

T80 Series Timing Belts

T80 Series Timing Belts

The T80 timing belt outside adjustment table lists the corresponding outside adjustment values for different belt lengths, for use when installing and adjusting timing belt pulleys. This table is part of the design section and applies to the T80 belt profile. Adjustment values range from 3 mm to 30 mm, and belt lengths range from 254 mm to 4,572 mm.

TGC1 Crowned-Tooth Gear Coupling

TGC1 Crowned-Tooth Gear Coupling

The TGC1 series crowned-tooth gear coupling features a lightweight design and low moment of inertia, and can accommodate relatively large axial displacement. It is suitable for connecting two horizontal, coaxial drive shafts in medium- and low-load, high-speed applications. It can rotate in either direction, and either external-tooth sleeve can serve as the driving-shaft input end. Product parameters include maximum shaft diameter, nominal torque, ultimate torque, speed, axial compensation, radial compensation, moment of inertia, and weight. Custom bore dimensions are available.

TK10-K13/ATK10-K13 Polyurethane Timing Belt, Open-Ended/Joined Type

TK10-K13/ATK10-K13 Polyurethane Timing Belt, Open-Ended/Joined Type

This series of polyurethane timing belts is available in two tooth profiles, TK10-K13 and ATK10-K13, for open-ended or joined-belt drives. The belt body is made of thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The tensile cords are made of galvanized steel wire or aramid cord. The tooth surface and belt back can be left uncovered or covered with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths for TK10-K13 are 30, 50, 75, 100, and 120 mm; standard widths for ATK10-K13 are 30, 50, 75, and 100 mm. The belt thickness is 8.5±0.3 mm, and the length tolerance is ±0.8 mm/m. The standard length is 100 m, or a custom length can be supplied. These belts offer high wear resistance, high load capacity, and low elongation, and are widely used for synchronous power transmission in automation equipment, packaging machinery, textile machinery, and other applications.

Z21 Miscellaneous Accessory

Z21 Miscellaneous Accessory

The Z21 is a miscellaneous factory automation accessory used to connect a shaft to a hub or another shaft, transmitting torque and axial force. Its load capacity is described in the catalog by parameters such as transmitted axial force, transmitted torque and contact pressure. Select the appropriate size based on operating torque, axial load and allowable contact pressure. The catalog recommends an h8 shaft tolerance and an H8 hub tolerance to ensure proper contact between the shaft and bore and stable load capacity after assembly, preventing slippage or fretting wear caused by an excessively loose fit. The product is available in a range of sizes; see the catalog dimension table for the rated torque and axial force for each size. The dimension table on this page could not be clearly read in the scan, so confirm the inner diameter, outer diameter, width and other dimensions before ordering. Suitable for securing connections in drive mechanisms, coupling assemblies and various automation systems.

Z2A Locking Assembly

Z2A Locking Assembly

The Z2A locking assembly is a miscellaneous accessory that provides a keyless connection by clamping between the shaft and hub, transmitting axial force and torque. The catalog specifies recommended mounting tolerances of h8 for the shaft and H8 for the hub, and lists dimensions, transmissible axial force, transmissible torque and contact pressure. It is suitable for power transmission connections that require a keyless, removable assembly with high centering accuracy. Load capacity varies by size; consult the relevant dimension table when selecting a model based on the actual shaft diameter, hub dimensions and required torque/axial force.