Transmission Accessories — Page 10

SEI Series Couplings

SEI Series Couplings

SEI Series couplings are machined as a single piece from high-strength aluminum alloy, providing zero backlash. The parallel-cut leaf springs accommodate parallel, angular, and axial misalignment. Available in two lengths: the standard SEI and the shorter SEI-S. Secured with set screws. Suitable for servo motors, stepper motors, and general-purpose motors. The body is made of 2024 aluminum alloy with an anodized finish; the set screws are made of SCM435 steel with a black-oxide finish. Example model: SEI-25-10×10 indicates a 25 mm outer diameter, a length of 31 mm, and D1 and D2 bore diameters of 10 mm each.

SEI Series Flexible Couplings

SEI Series Flexible Couplings

SEI series flexible couplings feature a clamping design and are suitable for low- to medium-torque applications. The range includes standard models (SEI-12 to SEI-32) and short models (SEI-125, SEI-165, SEI-20S, SEI-25S, and SEI-32S). Bore diameters range from 3 to 16 mm; rated torque is 0.4–4 N·m, maximum torque is 0.8–8 N·m, and maximum speed is 15,000–40,000 rpm. They offer good eccentricity compensation and angular misalignment capability, with static torsional stiffness of 45–1,100 N·m/rad. Lightweight and compact, they are suitable for precision drive applications such as stepper and servo motors.

SSEC Series Clamping Couplings

SSEC Series Clamping Couplings

SSEC Series Clamping Couplings feature a body made of SUS303 stainless steel in its natural finish or blackened SCM435 alloy steel (grade 12.9). A parallel-cut leaf spring transmits torque, delivering zero backlash and high torque capacity while accommodating parallel, angular, and axial misalignment. Available in standard and shortened lengths. The clamping connection is secure and easy to install or remove. Example model code: SSEC-25S-10X10, where SSEC is the series, 25 indicates a 25 mm outer diameter, S is the length code (for a 25 mm length), and 10 indicates the bore size (both D1 and D2 are 10 mm). Select the outer diameter, length code, and bore sizes at both ends to suit your requirements.

SSEC Series Couplings

SSEC Series Couplings

The SSEC series consists of flexible couplings secured with clamping screws, designed for small-shaft drives. They offer high torque, high-speed operation, and low inertia. Standard models have an outer diameter of 12–32 mm, a length of 14–31 mm, a rated torque of 0.4–4 N·m, and a maximum speed of 15,000–40,000 rpm. Available in standard, short, and S-type configurations to suit different installation spaces, they are widely used in precision drive applications such as stepper and servo motors.

SSEII Series Set Screw Coupling

SSEII Series Set Screw Coupling

The SSEII Series Set Screw Coupling features zero backlash and high torque capacity. Its parallel-cut construction ensures precise, stable power transmission. Available in standard and shortened lengths, it uses a fixed set-screw fastening method for easy installation and removal. The main body is made of CSS alloy steel, natural-finish SUS303 stainless steel, or SCM435, and is secured with set screws. Suitable for servo motors, stepper motors, and general-purpose motors, it is an essential connection component in industrial automation drive systems.

SSEI Series Flexible Couplings

SSEI Series Flexible Couplings

The SSEI Series flexible coupling is a high-precision, high-rigidity coupling designed for precision drive systems such as servo motors and stepper motors. It features a jaw-style elastomer that compensates for radial, angular, and axial misalignment while absorbing vibration and shock. The range includes multiple sizes in standard and short versions (S suffix), with outside diameters from 12 mm to 32 mm and a maximum shaft bore of 16 mm. Rated torque ranges from 0.4 to 4 N·m, maximum torque from 0.8 to 8 N·m, and maximum speed reaches 40,000 rpm. It uses threaded locking for easy installation. Applications include automation equipment, machine tools, and robotics.

SP Rigid Coupling

SP Rigid Coupling

SP series rigid couplings are available in aluminum alloy (SP) and stainless steel (SSP), with a choice of clamp-type (C) or set-screw-type (I) mounting. Machined as a single piece, they provide zero backlash and offer high torsional rigidity with low weight and inertia. Suitable for precision drive applications such as servo and stepper motors. Outer diameters range from 16 to 32 mm, and bore diameters from 3 to 16 mm depending on the model. Maximum speed is up to 39,000 rpm.

High-Performance Sleeve Belts

High-Performance Sleeve Belts

The high-performance sleeve belt range is made from polyurethane composite material and high-tensile-strength steel cords, delivering superior timing belt performance. Compared with conventional T- and AT-profile timing belts, torque transmission capacity is increased by more than 30%, making these belts ideal for compact installations. Features include high-power transmission, maintenance-free operation, excellent length stability, dust-free performance, resistance to chemicals (oil, grease and gasoline), and wear resistance. Operating temperature range: -30°C to +100°C. Available with standard tooth profiles such as T2.5, T5, T10, AT5 and AT10, as well as custom profiles including MXL, L, H, HD5M and double-sided DD. The seamless endless design is available in lengths from 900 mm to 22,000 mm and is suitable for high-speed, high-load drives. Cord options include Standard, HPL (High Performance), HFE (High Flexibility), INOX (stainless steel) and ARAMID, with antistatic versions also available. Backing options include polyamide, polyurethane film, polyurethane foam and rubber, among others, for conveyor applications.

Endless, seamless synchronous drive belt

Endless, seamless synchronous drive belt

Endless, seamless synchronous drive belts (also known as high-performance sleeve belts) are made from polyurethane composite material with high-strength steel cords (optional Kevlar cords). Their seamless construction eliminates weak cross-sections, making them suitable for high-speed, high-load power transmission. Compared with conventional T- and AT-profile timing belts, they offer over 30% greater torque transmission capacity, making them ideal for compact applications. They provide excellent length stability and are maintenance-free, clean-running and dust-free, with high resistance to chemicals (including oil, grease and gasoline) and abrasion. Operating temperature: -30°C to +100°C. Standard tooth profiles available: T2.5, T5, T10, AT5 and AT10; custom profiles include MXL, L, H, HD5M and double-sided DD. Special cord options include HPL (high performance), HFE (high flexibility), INOX (corrosion-resistant stainless steel) and ARAMID (lightweight, non-magnetic). Available in lengths from 900 mm to 22,000 mm, with standard length tolerances as specified in the table. Antistatic coatings or compounds are available subject to minimum order quantities.

T-Series Timing Belts

T-Series Timing Belts

T-Series timing belts feature a highly wear-resistant thermoplastic polyurethane body reinforced with high-tensile-strength steel cords. The tooth surfaces are available with a polyamide fabric covering to reduce friction and noise. Multiple tooth profiles are available, including T2.5, T5, T10, and T20, with pitches of 2.5 mm, 5 mm, 10 mm, and 20 mm, respectively. Depending on your requirements, you can choose standard cords, HFE high-flexibility cords, HPL high-performance cords, stainless steel cords, or aramid cords. These timing belts are also suitable for conveying applications and can be fitted with various backings, such as polyurethane film, polyurethane foam, or rubber, to suit different conveying environments and products. Operating temperature: toothed-belt construction must not exceed 80°C.

MTD Series Timing Belts

MTD Series Timing Belts

MTD Series timing belts are made from highly wear-resistant thermoplastic polyurethane and reinforced with high-tensile-strength steel cords, delivering excellent power transmission performance and wear resistance. Available tooth profiles include MTD3, MTD5, MTD8, and MTD14, with pitches of 3 mm, 5 mm, 8 mm, and 14 mm, respectively; tooth heights (H1/H2) vary with the pitch. Choose from standard cords, HFE high-flexibility cords, or HPL high-performance cords. Stainless steel or aramid cords are also available for special environments. The belt can be fitted with a range of backings, including polyamide (reduces the coefficient of friction), polyurethane film (corrosion-resistant), polyurethane foam (compressible), and rubber (high friction and heat-resistant). These belts are widely used in conveying and power transmission, especially in conveying applications that require precise synchronization. The operating temperature range depends on the backing, but the temperature at the belt teeth should not exceed 80°C.

STD Series Synchronous Belts

STD Series Synchronous Belts

STD Series synchronous belts are made from highly abrasion-resistant thermoplastic polyurethane and reinforced with high-strength steel tension members. The tooth surface can be covered with polyamide fabric to reduce friction and noise. Three tension member options are available: standard, HFE (high-flex) and HPL (high-performance), with stainless steel (INOX) and aramid options also available. Suitable for a wide range of synchronous conveying applications, these belts can be supplied with backings such as polyamide, polyurethane film, polyurethane foam and rubber to suit different operating conditions. Tooth profiles include STD5 and STD8, with pitches of 5 mm and 8 mm, respectively. See the tooth profile table for tooth height and root thickness. The belts operate across a wide temperature range, and the minimum pulley diameter can be calculated based on the backing thickness.

AT-Series Timing Belts

AT-Series Timing Belts

AT-series timing belts are made from highly abrasion-resistant thermoplastic polyurethane and reinforced with high-tensile-strength steel cords. The tooth surface can be covered with polyamide fabric to reduce friction and noise. They are available in several tooth profiles, including AT3, AT5, AT10, and AT20, with pitches of 3 mm, 5 mm, 10 mm, and 20 mm, respectively. They are suitable for high-speed drives and applications requiring precise positioning. Cord options include standard, HFE high-flexibility, HPL high-performance, stainless steel, and aramid. Polyurethane conveyor belts can be fitted with various backings, such as polyamide, polyurethane film, foam, or rubber, to suit different operating conditions. Ensure that the belt tooth temperature does not exceed 80°C.

TG Series Timing Belts

TG Series Timing Belts

TG Series timing belts are made from highly wear-resistant thermoplastic polyurethane and reinforced with high-tensile steel cords. The tooth surface can be covered with polyamide fabric to reduce friction and noise. Available in a range of tooth profiles, including TG5, TG10, ATG5 and ATG10, and with various backing options such as PUR, rubber and polyurethane film, these belts are suitable for synchronous drive and conveying applications. They can operate at temperatures up to 80°C, with heat-resistant backing materials available as an option. Cord options include standard, HFE high-flexibility, HPL high-performance, INOX stainless steel and aramid, to suit different positioning-accuracy and flexibility requirements.

XL-XH-L-H Series Timing Belts

XL-XH-L-H Series Timing Belts

This series comprises polyurethane timing belts with XL, XH, L and H tooth profiles. Made from highly wear-resistant thermoplastic polyurethane with steel tension members, they offer high tensile strength and low elongation. The tooth surface can be covered with polyamide fabric to reduce friction and noise. HFE high-flexibility, HPL high-performance, INOX stainless steel or aramid tension members are available to suit different applications. These belts are designed for synchronous power transmission and conveying, with a maximum operating temperature of 80°C. A range of backing materials is available, including polyurethane film (PUR50, PUR85), polyurethane foam (BLACK RUBBER, etc.) and rubber (LINATEX, etc.), for use in industries such as woodworking, ceramics, glass and paper manufacturing. The coefficient of friction against steel is 0.7 for polyurethane and 0.35 for polyamide. The minimum pulley diameter is calculated by multiplying the backing thickness by a factor.

Polyurethane belt with cleats

Polyurethane belt with cleats

A polyurethane belt with cleats is a drive belt made from polyurethane, with cleats added as needed for conveying, handling, positioning, and other applications. The cleats are made from the same material as the belt to ensure strength. The belt can convey products synchronously at high speeds and with low noise. A wide range of cleat types and shapes is available. The cleats may limit the contact arc, so U-shaped cleats at the minimum permitted thickness are recommended. Cleat pitch should be selected according to the belt tooth profile or module to reduce the effect of overall length tolerances on spacing. Cleats can be positioned on or between the teeth; positioning them on the teeth provides greater flexibility. Tooth-position tolerance is +/-0.5 mm and can be machined to +/-0.2 mm. When welding, apply approximately 0.5–1 mm of polyurethane between the cleat and the belt at the contact point. For removable cleats, attachments can be installed to accommodate a range of fixtures.

Timing Belt Mechanical Stop System

Timing Belt Mechanical Stop System

The timing belt mechanical stop system is designed for mounting cleats that cannot be welded onto polyurethane timing belts. It features galvanized or stainless steel stops with self-centering positioning, offering greater precision and load capacity than welded profiles while eliminating misalignment. The stops are flexible and can be repositioned, and they provide an economical solution since individual stops can be replaced as needed. Available pitches include AT10, ATK10, AT20, and H. Typical applications include ATN 10, ATN 12.7, and ATN 20.

TPU V-Belt Series

TPU V-Belt Series

The TPU V-belt series is made from high-quality thermoplastic polyurethane and offers excellent flex fatigue and abrasion resistance, as well as easy splicing. Available in A, B, C, D, M, and Z profiles, the belts range from 8 mm to 32 mm wide and 4 mm to 20 mm high, with a 3.5 mm pattern height (the M profile is smooth). Nylon or steel tensile cords can be added for reinforcement. The operating temperature range is -35°C to 80°C, and hardness ranges from Shore A 80 to 98. These belts are widely used in the textile, packaging, printing, machinery, electronics, glass, chemical, and ceramic industries, and perform especially well on conveyor lines such as glazing and polishing lines in the ceramics industry. They are easy to splice by heat welding and convenient to install and maintain.

TPU Round Belt Series

TPU Round Belt Series

The TPU Round Belt Series is made from high-quality thermoplastic polyurethane and is easy to heat-weld and join. It offers excellent flex resistance, abrasion resistance, and strength. The surface has a consistent texture and a smooth, glossy finish. Belts can be heat-welded to form joints and are easy to clean. Nylon or steel cords can be added for reinforcement. Operating temperature range: -35°C to 80°C; hardness: Shore A 80 to 98. Round belts are available in diameters from 2 mm to 20 mm. Belts with diameters of 8 mm and above can be reinforced with polyester cord or steel wire. Smooth belts have a fine surface finish, while rough belts have evenly distributed surface texture. They are widely used in the textile, packaging, printing, machinery, electronics, glass, chemical, and ceramics industries.

Rubber Timing Belt

Rubber Timing Belt

Rubber timing belts offer excellent dynamic flexibility, resistance to cracking, and ozone resistance, as well as resistance to aging, heat, oil, and wear. Chloroprene rubber timing belts are widely used in machinery for the textile, automotive, synthetic fiber, tobacco, paper, printing, and chemical industries. A timing belt drive consists of a closed-loop belt with evenly spaced teeth on its inner surface and matching pulleys. The belt teeth mesh with the pulley grooves to transmit motion and power. This positive-drive system combines the advantages of gear, chain, and flat-belt drives. Timing belt drives provide an accurate transmission ratio without slippage, maintain a constant speed ratio, enable precise transmission, run smoothly, absorb vibration, and operate quietly.

Timing belt pulley

Timing belt pulley

Timing belt pulleys are used to secure the ends of belts in linear drive systems. Their profile matches the belt, ensuring even clamping force. They typically need to clamp at least 8 teeth (12 teeth are recommended for HPL belt cores). Available materials include aluminum alloy (clear anodized) and S45C steel (black oxide or zinc plated). Pitch types include MXL, XXL, XL, L, H, XH, XXH, T series, AT series, 3M/5M/8M/14M/20M, S series, and RPP series. Bore sizes use nominal N-series designations (N8 to N50), with keyway and stepped-bore options available. Timing belt pulleys are supplied as semi-finished parts for easy customization.

Clamping plate

Clamping plate

Clamping plates provide an effective way to secure the ends of drive belts in many linear drive systems. They must be shaped to match the belt profile, provide even clamping force across all belt clamping surfaces, and be rigid. For standard applications, at least 8 teeth must be clamped. If the timing belt has an HPL tension member, clamping at least 12 teeth is recommended. Clamping plates are supplied as semi-finished products. Aluminum is the standard material used to make them.

PU Open-Ended/Spliced Belts

PU Open-Ended/Spliced Belts

Polyurethane open-ended/spliced belts are made from polyurethane and available in H pitch (1/2 in, 12.7 mm) and L pitch (3/8 in, 9.525 mm). Belt body colors are available in white or black, with steel or Kevlar tensile cords. The maximum width is 150 mm for H pitch and 100 mm for L pitch; the standard length is 100 m. Length tolerance: ±0.5 mm/m; thickness tolerance: ±0.2 mm. Optional features include fabric on the toothed side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), and a coating. Suitable for linear drives, conveying, positioning, and other applications, the open-ended design makes on-site splicing or welding into an endless loop easy.

Polyurethane Open-Ended/Jointed Belts

Polyurethane Open-Ended/Jointed Belts

Polyurethane Open-Ended/Jointed Belts are made from polyurethane and offer excellent abrasion, oil and aging resistance. The range includes various tooth pitches, such as HD 3M, HD 5M, HTD 8M and HTD 14M, to suit different drive requirements. Belts are available in white or black, with steel or Kevlar tensile cords. The standard length is 100 m. Maximum widths are 150 mm for the HD series and 300 mm for the HTD series. Length tolerance is ±0.5 mm/m; thickness tolerance is ±0.2 mm for the HD series and ±0.4 mm for HTD 14M. Optional features include fabric on the tooth side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), a covering, double-sided teeth and an integrated guide, offering flexibility for custom applications.

RPP/ATN Series Open-Ended Polyurethane Timing Belts

RPP/ATN Series Open-Ended Polyurethane Timing Belts

This series of open-ended polyurethane timing belts (spliceable belts) includes models such as RPP5M, RPP8M, RPP14M, and ATN20. Suitable for linear drives, conveyor lines, packaging machinery, and other applications requiring open-ended timing belts, they can be cut to the required length on site and spliced into a closed loop. Made of polyurethane, they offer excellent wear and oil resistance, along with high tensile strength. Available in white and black, with steel or Kevlar tensile cords to meet different strength requirements. Length tolerance: ±0.5 mm/m. Thickness tolerance: ±0.2 mm or ±0.4 mm, depending on the model. Maximum widths range from 100 to 150 mm; standard length is 100 m. Optional features include fabric covering on the toothed side (NFT), fabric covering on the back (NFB), fabric covering on both sides (NFT+NFB), and a coating (Covering) to suit different friction requirements and pulley materials. RPP5M has a 5 mm pitch, RPP8M an 8 mm pitch, and RPP14M a 14 mm pitch. ATN20 offers higher load capacity; refer to the catalog for its specific pitch specifications.

Polyurethane Open-Ended/Jointed Belts (RPP/ATN Series)

Polyurethane Open-Ended/Jointed Belts (RPP/ATN Series)

This series of polyurethane open-ended/jointed belts is designed for linear motion drives, material conveying, and similar applications. Made from polyurethane, the belts can be reinforced with steel or Kevlar tensile cords and offer excellent wear resistance, tensile strength, and oil resistance. The range includes models such as RPP5M, RPP8M, RPP14M, and ATN20, with pitches from 5 mm to 14 mm (the ATN20 pitch is not specified). Maximum width is up to 150 mm, standard length is 100 m, length tolerance is ±0.5 mm/m, and thickness tolerance is ±0.2 mm to ±0.4 mm. Available in white or black, the belts can also be supplied with fabric on the tooth side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), or a coating.

AT Series Polyurethane Open-Ended Belt

AT Series Polyurethane Open-Ended Belt

The AT Series polyurethane open-ended belt (also suitable for splicing) is designed for synchronous drive and linear conveying applications. Made from polyurethane (PU), it is available in two standard pitches: AT10 and AT20. The belt has a length tolerance of ±0.5 mm/m and a thickness tolerance of ±0.4 mm. Available in white or black, it can be supplied with steel or Kevlar cords. The maximum width is 150 mm, and the standard length is 100 m. Optional features include fabric on the tooth side, fabric on the back, fabric on both sides, a rubber coating, and an integral guide, to meet different requirements for wear resistance, noise reduction, guidance, and installation.

Polyurethane Flat Belts (PU Flat Belts)

Polyurethane Flat Belts (PU Flat Belts)

PU flat belts are flat drive belts made primarily of polyurethane and reinforced with embedded steel cords. Designed for lifting, power transmission and conveying applications that do not require synchronization, they can run on small-diameter pulleys for a compact drive layout. They offer low inertia, maintenance-free operation, long service life and low noise. An integral guide strip can be added for specialized conveying needs. Belt thickness can be customized to suit different operating conditions. This product range is widely used in light-duty drive and material-handling equipment in the packaging, printing, textile and woodworking industries.

Seamless TPU Timing Belt

Seamless TPU Timing Belt

Seamless TPU timing belts are made with a continuous helical high-strength steel cord and highly abrasion-resistant, high-tensile-strength TPU polyurethane. They are ideal for high-power drives and heavy-load conveying applications. Optional nylon fabric coatings are available on the tooth side (NFT), the back side (NFB), or both sides (NFT-NFB), helping improve running performance and reduce friction noise. An additional coating of a specified thickness can also be applied to the belt back for wear protection. These belts offer dimensional stability, low noise, low maintenance, high abrasion resistance, and resistance to aging, hydrolysis and ozone, as well as excellent oil resistance. Effective lengths range from 600 mm to 25,000 mm, making them suitable for a wide range of industrial drive and conveying applications.

PU Timing Belt Cleats

PU Timing Belt Cleats

This range of cleats is designed for PU timing belts. Cleats in various shapes can be fitted to the back of the belt to guide, stop, and position materials during conveying. Cleats can be custom-made to customer specifications, including shape and dimensions. Made of polyurethane (PU), they are either molded integrally with the timing belt or heat-welded to it for a strong, flexible bond. They are wear-resistant, oil-resistant, and weather-resistant. These products are widely used in automation equipment, packaging machinery, food conveying, and logistics systems.

Rubber Timing Belts

Rubber Timing Belts

This series of rubber timing belts features two tooth profiles: T-type (trapezoidal) and curvilinear (HTD). The T-type range includes seven models: MXL, XXL, XL, L, H, XH, and XXH, with pitches from 2.032 mm to 31.75 mm, tooth heights of 0.51–8.53 mm, belt thicknesses of 1.14–13.20 mm, and a tooth angle of 40°. The curvilinear range includes six models: HTD 2M, 3M, 5M, 8M, 14M, and 20M, with pitches from 2 mm to 20 mm, tooth heights of 0.75–8.53 mm, belt thicknesses of 1.36–13.20 mm, and a tooth angle of 40°. Made from rubber, these belts offer wear resistance, oil resistance, and tensile strength. They are suitable for a variety of drive systems, including machine tools, packaging machinery, and automation equipment. Tensile strength ranges from 80 N/mm to 520 N/mm, depending on the model.

Cleated Sidewall Conveyor Belt Series

Cleated Sidewall Conveyor Belt Series

This series is a range of cleated sidewall conveyor belts from Dingying Industrial Belts. Designed for light industrial applications, these belts are suitable for inclined and horizontal conveying, as well as production lines where spillage must be prevented. Sidewalls along both edges and cleats across the belt increase its carrying capacity and keep materials from falling off the sides. They are commonly used in automated packaging, food processing, electronics, and logistics sorting equipment. Available colors include white PU, blue, and green. The white PU surface is easy to clean, making it suitable for food processing and other industries with stringent hygiene requirements; blue and green are standard industrial colors. Optional tracking guides can be added to help reduce belt misalignment during operation. Belt width and circumference, cleat height, sidewall height, guide profile, and other specifications are customized to suit your requirements and confirmed by the manufacturer.

Conveyor Belt with Tracking Guides

Conveyor Belt with Tracking Guides

This series features conveyor belts with cleats and sidewalls, available in white PU, blue, green, and other colors. Optional tracking guides help prevent materials from shifting during conveying. Suitable for automated production lines, material handling, packaging, and other applications. Specific dimensions, strength, and installation parameters require confirmation.

Dingying Industrial Belt Timing Pulleys

Dingying Industrial Belt Timing Pulleys

This series of timing pulleys is designed for use with Dingying industrial belts. The page mainly lists parameter options related to materials and surface finishes. Available materials include aluminum (Aluminium/AL), steel (Steel/ST), and polyacetal (Derrin/PDM). Aluminum and polyacetal are suitable for medium-power applications and are lightweight, with low rotational inertia. Both are standard-material stock pulleys suitable for wear-resistant applications. Steel is suitable for high-power applications; it is durable and wear-resistant, and is also a standard-material stock pulley suitable for wear-resistant applications. Products can be used in woodworking, steel processing, logistics, meat processing, food production, fiber-optic cable, packaging machinery, steel, paper and printing, tobacco processing machinery, glass processing, and other industries. The page also contains numerous “surface finish” entries, but does not provide detailed specifications such as tooth profile, pitch, or tooth count. Confirm the specific model when selecting a product.

SI...T/K Series Rod End Spherical Plain Bearings

SI...T/K Series Rod End Spherical Plain Bearings

The SI...T/K series rod end spherical plain bearings are maintenance-free, self-lubricating bearings. The rod end body has a left- or right-hand female thread, and the sliding contact surface uses a steel/PTFE composite for oscillating motion without additional lubrication. The rod end body is zinc-plated for a degree of corrosion resistance. The series covers nominal diameters from 5 mm to 50 mm, with thread sizes ranging from M5×0.8 to M48×2.0; selected sizes are available with standard or fine threads. These bearings are suitable for construction machinery, automation equipment, transmission linkages, pneumatic and hydraulic systems, and other applications that need to transmit oscillating motion or tensile and compressive forces in confined spaces.

POS Series Rod End Spherical Plain Bearings

POS Series Rod End Spherical Plain Bearings

POS Series rod end spherical plain bearings have externally threaded rod ends, available with left- or right-hand threads. The spherical outer ring is fitted with a bronze liner, while the rod end body is zinc-plated and equipped with a lubrication hole or grease nipple. These bearings are suitable for joints requiring oscillating and tilting motion in applications such as automation equipment, construction machinery, and hydraulic cylinders. They can withstand combined radial and axial loads. The range covers POS 5 to POS 30, with bore diameters of 5–30 mm and thread sizes from M5×0.8 to M30×2.0. Various fine-pitch thread options and special mounting models (such as POS 30-1) are also available. Left-hand models can be selected by adding L before the model number (e.g., POSL 8), and stainless steel models by adding S (e.g., SPOS 8).

PHS Series Rod End Bearings

PHS Series Rod End Bearings

PHS Series Rod End Bearings are spherical plain bearings centered on a spherical sliding contact. They are used in applications requiring angular compensation and load transmission, such as automation equipment, linkage mechanisms, and connections for pneumatic and hydraulic cylinders. The catalog shows front, side, and top views, along with a dimensional table. Dimensions include bore diameter d, spherical diameter d3, width B, fork opening width C1, head width W, and various lengths from L3 to L676, covering connection and installation requirements across different sizes. Related notes on the same page list typical features of maintenance-type bearings: the outer race has a spherical bronze liner, the rod-end body is zinc-plated, and the bearing has a lubrication hole or oil ring. The notes also explain the model designation: “L” is added for left-hand threads, and “S” is prefixed for stainless steel. Refer to the original catalog table for exact specifications, load ratings, and weights.

PHSB Series Male-Thread Lined Rod End Bearings

PHSB Series Male-Thread Lined Rod End Bearings

PHSB Series male-thread lined rod end bearings feature a male-threaded shank and a lined bearing insert. They are suitable for connections requiring directional adjustment and oscillating motion in automation equipment, conveyors, packaging machinery, and similar applications. This series uses imperial dimensions and includes nine sizes, from PHSB 3 to PHSB 16: 3, 4, 5, 6, 7, 8, 10, 12, and 16. The catalog provides detailed dimensions for each model, including bore diameter, outside diameter, width, center distance, thread size, and length, with imperial and metric equivalents, as well as weight data. The liner helps reduce friction and compensate for wear, while the male-threaded end allows for easy installation and fastening.

CF Series Rod End Bearings

CF Series Rod End Bearings

The CF series comprises inch-size rod end bearings with a left- or right-hand female thread. The rod body is formed around the inner ring by a swaging process and zinc-plated for corrosion protection. The steel-on-steel sliding contact surfaces make these bearings suitable for general industrial connections, power transmission, and adjustment mechanisms. The series includes sizes such as CF3, CF4, CF5, CF6, CF7, CF8, CF10, and CF12, with main body dimensions ranging from approximately 4.826 mm to 19.05 mm. Thread sizes include 10-32, 1/4-28, 1/2-24, 3/4-24, 7/8-20, 1/2-20, 3/4-18, and 1/2-16. Load ratings range from approximately 9 to 63 kN. The smaller sizes marked with * have no lubrication hole or grease nipple; other sizes can be fitted with a grease nipple using the CF...S designation. Add “L” to the model designation for a left-hand thread, for example, CFL10.

CM Series Rod End Bearings

CM Series Rod End Bearings

CM Series Rod End Bearings, also known as wing bearings, are spherical plain bearings used in pivoting connections in mechanical linkages, push rods, and automation equipment. Models in this series use CM as the base designation, with additional versions carrying the CM...S suffix. The page provides dimensional diagrams covering parameters such as bore diameter d2, width B, center height h1, and thread specifications. Refer to the selection tables in the complete catalog for specific dimensions and load data. These rod end bearings typically offer self-alignment, compensation for angular misalignment, a compact design, and ease of installation. They are suitable for mechanical connections requiring oscillating or tilting motion.

CF/CM...T Series Rod End Bearings

CF/CM...T Series Rod End Bearings

This series comprises inch-size rod end bearings in two model ranges: CF...T and CM...T. The rod end bodies are formed by extrusion and zinc-plated. The spherical outer surface is bonded with PTFE composite material, and the sliding contact surface is steel/PTFE fabric, offering low friction and wear resistance. These bearings require maintenance. They are available with left- or right-hand external threads; left-hand versions have an L added after the series designation, such as CFL10 T and CML5 T. Sizes range from CF 5 T to CF 12 T and CM5 T to CM12 T, with load ratings of approximately 28.693–113.642 kN and weights of approximately 0.032–0.295 kg. They are suitable for oscillating and tilting connections in linkages, automation equipment, and transmission systems.

CM...T Series Rod End Spherical Plain Bearings

CM...T Series Rod End Spherical Plain Bearings

The CM...T series comprises inch-size rod end spherical plain bearings that require maintenance. The rod end housing has a right- or left-hand external thread and is swaged around the inner ring. The surface is zinc-plated. The outer spherical surface is bonded with PTFE composite material, and the sliding contact surface is steel/PTFE fabric, providing self-lubrication and low friction. Bore diameters range from 7.938 to 19.050 mm, load ratings from 28.693 to 113.642 kN, and individual weights from 0.032 to 0.259 kg. The series is available in six sizes: CM5 T, CM6 T, CM7 T, CM8 T, CM10 T, and CM12 T. For a left-hand thread, add L after CM (for example, CML5 T).

NOS Series Rod End Bearings

NOS Series Rod End Bearings

The WERB NOS Series comprises maintenance-free rod end bearings with left- or right-hand external threads. The rod end body is press-fitted around the inner ring, and the outer ring’s spherical surface is bonded with a PTFE composite, providing maintenance-free, self-lubricating operation. The rod end body is zinc-plated. These bearings are suitable for oscillating and tilting connections in automation equipment, transmission systems, linkage mechanisms, and a wide range of industrial machinery. The range includes NOS 3 to NOS 25, with bore diameters of 3–25 mm, thread sizes from M3×0.5 to M24×2.0, dynamic load ratings of 1.7–68 kN, static load ratings of 2.0–85 kN, and weights of 10–640 g. Add the suffix L to left-hand thread models, for example, NOS 18 L.

PHS...EC Series Maintenance-Free Rod End Spherical Plain Bearings

PHS...EC Series Maintenance-Free Rod End Spherical Plain Bearings

The PHS...EC series comprises maintenance-free rod end spherical plain bearings. The rod end body has a left- or right-hand internal thread and is swaged around the inner ring. The outer ring's spherical surface is lined with PTFE composite material, and the surface is zinc-plated, so no maintenance is required. The series covers bore diameters d=3–22 mm and thread sizes from M3×0.5 to M22×1.5, with dynamic load capacities of 3,500–74,700 N and static load capacities of 2,480–36,400 N. Left-hand threads are available (indicated by an L suffix in the model number, e.g. PHS18ECL), as are right-hand threads. Suitable for automation equipment, linkage mechanisms, hydraulic and pneumatic systems, and other applications.

PHS/POS...EC Series Rod End Spherical Plain Bearings

PHS/POS...EC Series Rod End Spherical Plain Bearings

This series comprises maintenance-free rod end spherical plain bearings in two subseries: PHS and POS. The rod end bodies have left- or right-hand internal threads and are formed by extrusion. The outer ring's spherical surface is bonded with PTFE composite material, and the surface is zinc-plated. No additional lubrication is required. Bore diameters range from 3 to 22 mm, thread sizes from M3×0.5 to M22×1.5, and ball diameters from 7.938 mm to 38.100 mm. Maximum dynamic load capacity is 74,700 N, and maximum static load capacity is 36,400 N. Models with left-hand threads have an “L” at the end of the model code. These bearings are widely used in automation equipment, drive mechanisms, and mechanical joints.

SI...E(S)/SA...E(S) Series Rod End Spherical Plain Bearings

SI...E(S)/SA...E(S) Series Rod End Spherical Plain Bearings

The SI...E(S) and SA...E(S) series are rod end spherical plain bearings assembled from a rod end body and a GE...E(S) or GE...ES 2RS radial spherical plain bearing. SI models have a female-threaded rod end body, while SA models have a male-threaded body; both are available with left- or right-hand threads. The rod end body is zinc-plated. SI...ES/SA...ES models feature a lubrication hole or grease nipple. The range covers shaft diameters d=6–80 mm, thread sizes M6×1.0 to M64×4.0, dynamic load ratings of 3.40–400 kN, static load ratings of 8.15–750 kN, and weights of approximately 17–12,000 g. Add L to the model designation for left-hand threads (e.g. SAL30ES). For bore diameters d≥15, a 2RS double-sided sealed design is available (e.g. SA25ES 2RS).

SA...E(S) Series Rod End Spherical Plain Bearings

SA...E(S) Series Rod End Spherical Plain Bearings

SA...E(S) series rod end spherical plain bearings are radial spherical plain bearings with a male-threaded rod end body. They consist of a zinc-plated rod end body and a GE...E (S) or GE...ES 2RS radial spherical plain bearing. The rod end body is available with left-hand or right-hand external threads. Models with left-hand threads carry the prefix L, for example, SAL30ES. SA...ES rod end bodies have a lubrication hole or grease nipple; sizes marked with * are not supplied with a lubrication hole or grease nipple. Bore diameters range from 6 to 80 mm, thread sizes from M6×1.0 to M64×4.0, dynamic load ratings from 3.4 to 400 kN, static load ratings from 8.15 to 750 kN, and weights from 17 to 12,000 g. A 2RS double-sealed design is also available for bearings with bore diameter d ≥ 15, for example, SA25ES 2RS. These bearings are suitable for reciprocating and oscillating motion and for connections requiring self-alignment. They are widely used in construction machinery, hydraulic cylinders, agricultural machinery, and other applications.

SI...C/SI...ET 2RS Series Female-Thread Rod End Spherical Plain Bearings

SI...C/SI...ET 2RS Series Female-Thread Rod End Spherical Plain Bearings

This series of maintenance-free female-thread rod end spherical plain bearings features a rod end body with a right-hand thread (standard) or left-hand thread and a zinc-plated surface. Each bearing consists of a rod end body and a self-lubricating radial spherical plain bearing, GE...C or GE...ET 2RS. Model designations comprise the SI prefix, an optional L for left-hand thread, the bore diameter and the bearing type—for example, SI15C or SI15 ET 2RS. Bore diameters range from 6 to 80 mm, thread sizes from M6X1.0 to M64X4.0, dynamic loads from 3.6 to 570 kN, static loads from 8.15 to 750 kN, and weights from 21 to 12,000 g. Suitable for connections requiring oscillating or tilting motion in construction machinery, textile machinery, packaging machinery and other equipment.