Transmission Accessories — Page 16

DLFG Aluminum Alloy Double-Diaphragm Clamp-Type Coupling

DLFG Aluminum Alloy Double-Diaphragm Clamp-Type Coupling

The DLFG series aluminum alloy double-diaphragm clamp-type coupling features hubs made of high-strength aluminum alloy and diaphragms made of 304 stainless steel. It offers high torsional rigidity, zero backlash, ultra-low inertia, and high responsiveness, making it suitable for high-speed servo and stepper motor operation. The range includes five sizes, with rated torque from 1.2 to 25 N·m, allowable parallel misalignment of 0.10–0.25 mm, allowable angular misalignment of 1–1.5°, and a maximum speed of 10,000 RPM. The bore sizes at both ends can be freely configured. The bores are machined to H7/H8 tolerances, and custom specifications are available.

DSEG Aluminum Alloy Single-Diaphragm Clamp-Type Coupling

DSEG Aluminum Alloy Single-Diaphragm Clamp-Type Coupling

DSEG Series aluminum alloy single-diaphragm clamp-type couplings feature hubs made of high-strength aluminum alloy and diaphragms made of 304 stainless steel. They offer high torsional rigidity, zero backlash, ultra-low inertia, and high sensitivity. Designed specifically for servo and stepper motors, they are suitable for high-speed operation and provide identical rotational characteristics in both clockwise and counterclockwise directions. The stainless steel diaphragm compensates for angular and axial misalignment. Available in a range of sizes, from DSEG-21×16.7 to DSEG-55×37.2, these couplings have rated torques of 1.2–25 N·m, allowable eccentricity of 0.10 mm, allowable angular misalignment of 1°–1.5°, allowable axial misalignment of ±0.14–±0.30 mm, maximum speeds of 8,000–10,000 RPM, static torsional stiffness of 900–23,000 N·m/rad, and weights of 12–180 g. Bore tolerances are H7/H8. Custom sizes are available.

DLFJG Series Diaphragm Couplings

DLFJG Series Diaphragm Couplings

The DLFJG series aluminum alloy double-diaphragm coupling with set screws features hubs made of high-strength aluminum alloy and diaphragms made of 304 stainless steel. It offers high torsional rigidity, a zero-backlash connection, ultra-low inertia, and high responsiveness, making it suitable for high-speed operation. Its clockwise and counterclockwise rotation characteristics are identical, and the stainless steel diaphragms compensate for angular and axial misalignment. Designed specifically for servo and stepper motors, it delivers high-precision control. The surface is anodized, and the included hardware consists of cylindrical screws. Custom specifications are available.

DSEJG Aluminum Alloy Single-Diaphragm Set-Screw Coupling

DSEJG Aluminum Alloy Single-Diaphragm Set-Screw Coupling

The DSEJG series aluminum alloy single-diaphragm set-screw coupling features sleeves made of high-strength aluminum alloy and a diaphragm made of 304 stainless steel. Its high torsional rigidity enables precise shaft rotation control for high-precision positioning. Designed specifically for servo and stepper motors, it provides a backlash-free shaft-to-sleeve connection and supports forward and reverse rotation. Its low inertia makes it suitable for high-speed operation. It uses set screws for locking. The outer diameter ranges from 21 to 55 mm, the length from 16.7 to 37.2 mm, and the rated torque from 1.2 to 25 N·m. Allowable eccentricity is 0.10 mm, allowable angular misalignment is 1–1.5°, allowable axial misalignment is ±0.14–±0.30 mm, and the allowable speed is 8,000–10,000 rpm. Various bore combinations are available, and custom non-standard configurations such as keyways, hexagonal bores, square bores, and spline bores can be made to order.

DLN Aluminum Alloy Round Double-Diaphragm Clamp-Type Coupling

DLN Aluminum Alloy Round Double-Diaphragm Clamp-Type Coupling

The DLN series aluminum alloy round double-diaphragm clamp-type coupling features high-strength aluminum alloy hubs and 304 stainless steel diaphragms. With high torsional rigidity, zero-backlash connection, and low inertia, it is designed for servo and stepper motors and is suitable for high-speed operation and forward/reverse rotation. The surface is anodized, and the hubs are secured with set screws. Available in a range of outer diameters and lengths (19 × 27 to 50 × 57 mm). Bore sizes can be customized to meet customer requirements. H7/H8 standard tolerances are used by default, and custom specifications are available.

DSN Aluminum Alloy Round Single-Diaphragm Clamp-Type Coupling

DSN Aluminum Alloy Round Single-Diaphragm Clamp-Type Coupling

The DSN series features round, single-diaphragm clamp-type couplings made from aluminum alloy. The hubs are made of high-strength aluminum alloy, and the diaphragm is made of 304 stainless steel. High torsional rigidity enables precise control of shaft rotation for high-precision positioning. Designed specifically for servo and stepper motors, the zero-backlash connection supports forward and reverse rotation, while the low inertia makes it suitable for high-speed operation. Set screws provide secure fastening and make installation easy. These couplings are suitable for applications requiring precision power transmission and misalignment compensation. Multiple sizes are available, with outer diameters from 19 mm to 50 mm and lengths from 20 mm to 42 mm. Custom, non-standard designs are available to meet special requirements.

DFC Diaphragm Coupling

DFC Diaphragm Coupling

The DFC series features high-strength aluminum alloy diaphragm couplings with an anodized surface and cylindrical screw locking. Designed for high torque, high rotational speeds, low inertia, and zero backlash, they are suitable for precision drive applications such as servo and stepper motors. Models are specified by the combination of two shaft-hole diameters and are available in a wide range of bore sizes. Permissible misalignment: 0.02 mm parallel, 1° angular, and ±0.60 mm axial (±1.00 mm for some larger sizes).

LMT Series Jaw Flexible Coupling

LMT Series Jaw Flexible Coupling

The LMT Series jaw coupling uses a flexible intermediate spider to absorb vibration and compensate for radial, angular, and axial misalignment. It is oil-resistant and electrically insulating, with identical clockwise and counterclockwise rotation characteristics. Available with elastomers in three hardness grades and secured with clamping screws. Made from high-strength aluminum alloy with an anodized finish. Models range from 14 mm to 105 mm in outer diameter and 22 mm to 615 mm in length. Custom bore sizes are available to meet special operating requirements.

DF Series Jaw Coupling

DF Series Jaw Coupling

The DF Series jaw coupling features a high-strength aluminum alloy body and a polyurethane elastomer insert, offering excellent wear resistance, oil resistance, and electrical insulation. Its zero-backlash design is suitable for operation in both directions and compensates for radial, angular, and axial misalignment. The removable design makes installation easy, and set screws secure the coupling in place. Models are designated by outer diameter and length (for example, DF-20×30). Outer diameters range from 14 to 965 mm, with lengths varying accordingly. A range of standard sizes is available to meet different power transmission requirements.

DLZ Aluminum Alloy Expansion-Sleeve Jaw Coupling

DLZ Aluminum Alloy Expansion-Sleeve Jaw Coupling

The DLZ series aluminum alloy expansion-sleeve jaw coupling is designed for spindle applications requiring high speeds and high torque transmission. Its expansion-sleeve design provides a secure connection between the shaft and hub, while zero backlash makes it suitable for bidirectional rotation. The polyurethane elastomer offers good wear resistance, oil resistance, and electrical insulation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Its removable design makes installation easy. The hubs are made of high-strength aluminum alloy with an anodized finish. Bore holes are machined to standard H7/H8 tolerances, and custom specifications are available. A range of models and sizes is offered, with rated torque from 45 to 105 N·m and maximum torque from 90 to over 200 N·m, depending on the model, to accommodate different shaft diameters.

JFG Series Jaw Couplings

JFG Series Jaw Couplings

JFG series jaw couplings feature high-strength aluminum alloy hubs and a polyurethane spider, offering excellent wear resistance, oil resistance, and electrical insulation. The zero-backlash design is suitable for operation in both directions. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy. The surface is anodized, and the coupling is secured with clamping screws.

DLZG-45# Steel Expansion-Sleeve Jaw Coupling

DLZG-45# Steel Expansion-Sleeve Jaw Coupling

The DLZG-45# steel expansion-sleeve jaw coupling is designed for spindle applications requiring high-speed, high-torque transmission. Its expansion-sleeve design ensures a secure connection between the shaft and hub with zero rotational clearance, and supports both forward and reverse rotation. The polyurethane elastomer is wear-resistant, oil-resistant, and electrically insulating. It absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy. Made of 45# steel with a blackened surface finish, it is supplied with set screws. Standard models include DLZG-55×78, DLZG-65×90, DLZG-80×114, DLZG-95×126, and DLZG-105×140. Custom, non-standard models are also available.

DJ-A Star-Shaped Elastic Coupling

DJ-A Star-Shaped Elastic Coupling

The DJ-A Star-Shaped Elastic Coupling features a compact design and low inertia. Its engineering-plastic elastic element provides cushioning, vibration damping, and wear resistance. It operates at temperatures from -35°C to +80°C and requires no maintenance. The elastomer is constrained by the convex jaws, preventing internal deformation caused by impact and external deformation caused by centrifugal force. The jaws’ large concave surfaces keep surface pressure on the involute teeth very low, preventing wear or deformation even under overload. Axial plug-in installation is quick and convenient. The nominal torque listed in the table is for an elastomer hardness of 98 Shore A. Made of 45 steel with a blackened finish; includes locking set screws.

DJ-B Enlarged-Bore Star Flexible Coupling

DJ-B Enlarged-Bore Star Flexible Coupling

The DJ-B enlarged-bore star flexible coupling features steel hubs and is particularly suitable for heavy-duty drive units such as elevators and construction machinery. Its compact design provides low rotational inertia. Similar to the DJ-A model, it has larger bores. The table lists an elastomer hardness of 98 Shore A, a nominal torque range of 20–23,500 N·m, an allowable speed range of 2,000–19,000 rpm, and a bore diameter range of 6–220 mm. Bore configurations can be customized; the bore tolerance is H7/H8. Custom specifications are available.

GA-H Split Sleeve Coupling

GA-H Split Sleeve Coupling

The GA-H split sleeve coupling features a compact design and a star-shaped elastomer that transmits torque through keys and friction. Assembly and disassembly require only four bolts. The elastomer can be replaced without moving the drive or driven equipment, and the coupling can be installed and removed radially. Sizes range from 19 to 140, with maximum finished bore diameters from 20 mm to 140 mm. The bores at each end can be combined as required and are machined to standard H7/H8 tolerances. Suitable for heavy-duty drive units such as hoists and construction machinery. Custom designs are available to meet specific customer requirements.

GKM Type

GKM Type

The GKM-type jaw coupling features a double-section design with a three-piece, double-section construction. Its hubs are made of 45# steel, and its elastomer is made of polyurethane. It dampens vibration, reduces noise, and provides zero rotational backlash, making it suitable for forward and reverse rotation. It absorbs vibration, compensates for radial, angular, and axial misalignment, and extends the service life of adjacent components. A wide range of finished bore diameters is available (from 6 mm to 200 mm), with multiple sizes to choose from. Bore tolerances are H7/H8, and custom specifications are available. Product parameters include rated torque, dimensions (DH, E, S, b, LGKM, etc.), and misalignment compensation capacity.

DFG Stainless Steel Spider Coupling Series with Set Screws

DFG Stainless Steel Spider Coupling Series with Set Screws

DFG stainless steel spider couplings with set screws feature hubs made of SUS304 stainless steel for excellent corrosion resistance. The polyurethane elastomer is wear-resistant, oil-resistant, and electrically insulating. The zero-backlash design is suitable for applications requiring rotation in both directions. It absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy, and set screws secure the coupling. Custom bore sizes are available, with H7/H8 tolerances supported. A range of outer diameters and lengths is available to suit different torque and speed requirements.

DFCG Series Jaw Couplings

DFCG Series Jaw Couplings

DFCG series stainless steel jaw couplings feature hubs made from SUS304 or 316 stainless steel for excellent corrosion resistance. The polyurethane elastomer spider is wear-resistant, oil-resistant, and electrically insulating. It absorbs vibration and compensates for radial, angular, and axial misalignment. Zero rotational backlash makes these couplings suitable for reversing applications. The removable design allows for easy installation, and the hubs are secured with set screws. A range of sizes is available, with outside diameters from 20 mm to 65 mm, lengths from 30 mm to 90 mm, and multiple bore sizes with H7/H8 tolerances. Rated torque: 4.2–164 N·m; permissible eccentricity: 0.02 mm; angular misalignment: 1°; axial misalignment: ±0.60 mm; speed: 6,000–17,000 RPM. Suitable for precision drive systems such as servo and stepper motor applications.

DPG Series Jaw Couplings

DPG Series Jaw Couplings

DPG Series Jaw Couplings use high-strength polyurethane flexible elements that are wear- and oil-resistant, offer high load capacity, and provide a long service life. Their simple design features compact radial dimensions, low weight, and low moment of inertia, making them suitable for medium- and high-speed applications. They provide substantial axial, radial, and angular misalignment compensation, require no lubrication, and need little maintenance. The split design makes installation and removal easy. Standard surface treatments are generally used; custom designs and special materials are available. These couplings are widely used in metallurgy, mining, petroleum, chemical processing, lifting, transportation, textiles and other light industries, as well as in water pumps and fans.

DFS-45# Steel Jaw-Type Set-Screw Coupling

DFS-45# Steel Jaw-Type Set-Screw Coupling

The DFS-45# steel jaw-type set-screw coupling features 45# steel hubs and a polyurethane elastomer, with zero rotational backlash and suitability for bidirectional rotation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Its detachable design makes installation easy, and it is secured with set screws. The coupling has a simple structure, compact radial dimensions, low weight, and low rotational inertia, making it suitable for medium- to high-speed applications. The elastic element is wear- and oil-resistant, offers high load capacity and a long service life, and requires no lubrication. It is widely used in metallurgy, mining, petroleum, chemicals, lifting, transportation, light industry, textiles, water pumps, fans, and other industries.

DFCS 45 Steel Jaw-Type Clamping Series

DFCS 45 Steel Jaw-Type Clamping Series

DFCS 45 steel jaw-type clamping series couplings feature hubs made from 45 steel and zero backlash, making them suitable for forward and reverse rotation. The polyurethane elastomer offers excellent wear resistance, oil resistance, and electrical insulation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy, and the coupling is secured with clamping screws. Product specifications: Model DFCS-30×40; material: 45 steel; surface finish: blackened; included hardware: cylindrical-head screws. Custom designs and special materials are available on request.

DGFN Type with Brake Disc

DGFN Type with Brake Disc

The DGFN-type coupling with brake disc belongs to the steel jaw-type clamping coupling series. It features grade 45 steel hubs and a polyurethane elastomer, with zero backlash, making it suitable for reversible drives. The elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Secured with clamping screws, its detachable design makes installation easy. The standard surface finish is black oxide. Custom designs and special materials are available to meet the needs of demanding operating conditions.

GZ-GKM Series Flexible Couplings

GZ-GKM Series Flexible Couplings

The GZ-GKM Series double-flex couplings feature a double-flex design that provides excellent misalignment compensation. They effectively absorb vibrations caused by shaft misalignment and reduce noise. Installation and removal require just four bolts, making them quick and easy. Standard spacers up to 250 mm long are kept in stock for fast delivery. These couplings are ideal for drive applications requiring substantial misalignment compensation and vibration damping, such as protecting adjacent components like bearings and seals and extending their service life. Axial distance, maximum finished bore diameter, and torque capacity vary by model.

CF-CFN Series Flange Couplings

CF-CFN Series Flange Couplings

This series comprises flange-type couplings in two models: CF-CFN and DF-DFN. They use a flange connection and are suitable for connecting shafts in transmission systems. Specific technical parameters and specifications are not provided in the catalog.

DF-DFN Series Flange Couplings

DF-DFN Series Flange Couplings

The DF-DFN series features a flanged coupling design. It uses a flange connection to join drive shafts.

GDR Intermediate Shaft

GDR Intermediate Shaft

The GDR intermediate-shaft coupling is designed to connect shafts that are far apart and includes an intermediate shaft. Its double-joint design provides better misalignment compensation. It can be installed or removed radially without moving the driving or driven equipment. Maintenance is simple when split sleeves are used. The product is made of Grade 45 steel with a blackened finish and comes with set screws. Standard surface treatments are generally used, but custom designs and special materials are available to meet the requirements of demanding operating conditions.

NM Jaw Coupling

NM Jaw Coupling

The NM series jaw coupling is a flexible coupling consisting of two cast-iron jaw hubs and a natural-rubber spider. Made using precision casting, it offers safe, quiet operation and complies with GB9439. Maximum torque is 125 kg·m. It accommodates shaft diameters of 7–75 mm and motor power up to 60 HP/45 kW. Available in multiple sizes, it has an outer diameter of 50–270 mm, a rated torque range of 1.3–417 kg·m, and an applicable speed range of 4,000–13,500 rpm. A sample part number is “NM50×50×51.5-7×7.” Custom bore options include a keyway (K), hexagonal bore (F), square bore (S), or splined bore (H).

Couplings

Couplings

This series includes two types: L-type jaw couplings and DGF-type crowned gear couplings. L-type jaw couplings are made of ductile iron, 45# steel, or aluminum alloy, with a black-oxide finish and cylindrical screws. They effectively absorb shock loads, offer excellent oil retention, and require no maintenance. They provide a maximum torque capacity of 54.2 kg·m and allow radial misalignment of 0.3 mm, angular misalignment of 1°, and axial misalignment of +0.5 mm. DGF-type crowned gear couplings are made of 45# steel, with a black-oxide finish and set screws. Their crowned-tooth design provides excellent misalignment compensation. They are easy to install by axial insertion, allow wear to be inspected, and can be used to mount various fans. Finished bore tolerance is H7; keyway width tolerance is DIN 6885/1 JS9. DGF sizes range from 28 to 90, with outside diameters of 65–200 mm, lengths of 90–245 mm, and maximum finished bore diameters of 24–90 mm. Bore options include keyed (K), hexagonal (F), square (S), splined (H), and other custom shapes.

DGF Coupling

DGF Coupling

The DGF coupling features a crowned-tooth design that absorbs vibration and reduces noise. It offers excellent misalignment compensation, is easy to install by axial insertion, and allows wear to be visually inspected. Suitable for mounting a variety of fans. Finished bore tolerance: H7 per ISO standards; keyway width tolerance: JS9 per DIN 6885/1. Made of 45# steel with a blackened finish; supplied with set screws. Custom specifications are available.

HRC Jaw Coupling

HRC Jaw Coupling

The HRC series is a jaw-type flexible coupling made from high-quality cast iron with a black oxide finish. It is fitted with a highly resilient rubber spider that provides excellent shock absorption and vibration resistance for reliable power transmission. These are standard, general-purpose components with assured quality. Example model code: HRC-23.5×65-10×10, where 23.5 is the outer diameter (mm), 65 is the length (mm), and 10×10 indicates the bore diameters at both ends (mm). A range of sizes is available, with outer diameters from approximately 23.5 mm to 280 mm and corresponding variations in length. Bores can be machined to H7/H8 tolerances, and custom non-standard bore profiles are also available, including keyways, hexagonal, square, and splined bores. Set screws are included as standard. Suitable for general mechanical power transmission, with cushioning and vibration-damping properties.

DGAN Series Flexible Couplings

DGAN Series Flexible Couplings

DGAN couplings with brake drums are designed to work with drum brakes. Made from high-quality cast iron, they feature a rubber elastic sleeve with excellent resilience and strong shock absorption for reliable power transmission. The standard surface finish is black oxide, and custom specifications are available. Sizes range from 38 to 125, with maximum finished bore diameters from 12 mm to 145 mm. A variety of dimensions are available, and bores are machined to standard H7/H8 tolerances. Suitable for shaft-end installation with high rotational inertia. The braking torque must not exceed the coupling's maximum torque. Dimensions can be modified to meet customer requirements.

Couplings with Brake Drum or Brake Disc DGAN/DGSB

Couplings with Brake Drum or Brake Disc DGAN/DGSB

This series includes DGAN couplings with brake drums and DGSB couplings with brake discs, designed for use with drum brakes and caliper brakes, respectively. Made from high-quality cast iron or steel with a blackened finish, they offer excellent wear resistance and reliability. Sizes range from 38 to 125, with the maximum finished bore varying by material. Custom specifications are available for every size to meet special operating requirements. The brake drum or brake disc must be installed on the shaft end with the greatest rotational inertia, and the maximum braking torque must not exceed the coupling’s maximum torque.

LM Jaw-Type Flexible Coupling

LM Jaw-Type Flexible Coupling

The LM Series Jaw-Type Flexible Coupling compensates for relative misalignment between two shafts and provides vibration damping and cushioning. It has a simple design, requires no lubrication, offers high load capacity, and is easy to maintain. Replacing the flexible element requires axial movement. It is suitable for coaxial drive shafts operating at medium speeds and transmitting medium torque, particularly where frequent starting and changes in rotation direction occur. It is not suitable for low-speed, heavy-load applications or locations with limited axial space where aligning the shafts after replacing the flexible element is difficult. The operating temperature range is -35°C to +80°C, and the nominal torque range is 16 N·m to 25,000 N·m. The coupling is made of No. 45 steel with a blackened surface finish and comes with set screws. Select a configuration based on the shaft bore diameter and length. The bore is machined to standard H7/H8 tolerances; custom specifications are available.

LM Series Jaw-Type Flexible Couplings

LM Series Jaw-Type Flexible Couplings

Jaw-type flexible couplings compensate for relative shaft misalignment and provide vibration damping and cushioning. They have a simple, lubrication-free design, high load capacity, and are easy to maintain. Replacing the elastomer requires axial movement. They are suitable for medium-speed, medium-torque drive systems with coaxial shafts, frequent starts, and frequent reversals, as well as components requiring high operational reliability. Operating temperature: -35°C to +80°C. Nominal torque range: 16 N·m to 25,000 N·m. Made of grade 45 steel with a blackened surface finish; supplied with set screws. The series includes models such as LM1, LM8, LM9, LM10, LM13, and LM14. Bore diameters can be freely combined, and keyways, splines, and other features can be added. Custom non-standard designs are available.

LMS Double-Flange Elastic Jaw Coupling

LMS Double-Flange Elastic Jaw Coupling

The LMS double-flange elastic jaw coupling has a simple structure, compact radial dimensions, low weight, and low rotational inertia, making it suitable for medium- and high-speed applications. It provides substantial axial, radial, and angular compensation. Its high-strength polyurethane elastic element is wear- and oil-resistant, offers high load capacity, and provides a long service life with safe, reliable operation. No lubrication is required, maintenance is minimal, and the coupling can run continuously for extended periods. The product range includes multiple sizes, from LMS1 to LMS12, with rated torques from 25 to 12,500 N·m, allowable speeds from 1,500 to 8,500 rpm, and bore diameters from 12 to 160 mm. Custom non-standard versions are available on request, including additional accessories such as keyways.

CF High-Elasticity Rubber Coupling

CF High-Elasticity Rubber Coupling

This high-elasticity rubber coupling offers excellent shock and vibration absorption in a compact, easy-to-install, maintenance-free design with a long service life. It can be installed and removed radially, supports high rotational speeds, and provides effective compensation for axial, radial, and angular misalignment. It can be combined with shaft series products to form a high-elasticity drive shaft. Suitable for industrial power transmission systems, including compressors, pumps, generators, transfer cases, test rigs, locomotive drives, wind turbines, air compressors, and marine propulsion systems. Available in a range of sizes, with bore diameters from 8 mm to 16 mm to suit different torque and installation requirements.

R-Type Standard Coupling

R-Type Standard Coupling

The R-Type Standard Coupling is a robust, long-lasting, corrosion-resistant coupling with a high-strength standard nylon housing. Two stainless steel socket-head screws positioned 180° apart prevent relative movement between the housing and elastomer and secure the housing to the elastomer. If the flexible elastomer fails, it is retained to reduce the risk of damage and personal injury. Its compact design allows quick, easy replacement without redesigning the coupling guard. The coupling is made of 45 steel with a blackened finish and is supplied with cylindrical screws. Available in 13 sizes from 2R to 80R, it has a rated torque range of 11–15,000 Nm, an allowable speed range of 1,800–4,500 rpm, and a maximum bore diameter of 22–190 mm. It is suitable for damp and dusty environments and for operating conditions involving shock, vibration, frequent changes in direction, and frequent starts.

LA Series Tire Couplings

LA Series Tire Couplings

Tire couplings are suitable for operating conditions involving moisture, dust, impact, vibration, frequent changes in rotation direction, and frequent starts. They transmit torque ranging from 10 to 20,000 N·m. Made of No. 5 steel with a blackened finish, they feature a compact design and offer durability and reliability. They compensate for axial and angular misalignment, with axial misalignment of D × 2% and D × 1%, and angular misalignment of 3°–6°. Available models include LA and LA1 through LA20, with various torque ratings and bore sizes.

LB-type tire coupling

LB-type tire coupling

The LB-type tire coupling is a highly flexible coupling that provides excellent shock absorption and vibration damping, along with superior compensation for axial displacement. It operates at temperatures from -20 to +80°C and transmits torque from 10 to 20,000 N·m. It is suitable for humid, dusty conditions and applications involving impact, vibration, frequent starting, and frequent changes in direction of rotation. Its one-piece tire-shaped elastic element is durable and reliable, and easy to install, remove, and maintain. Flanges are available with Y, J1, or Z1 bore types. Misalignment compensation: axial, D × 1.5%; radial, D × 1%; angular, 25° to 5°. The bores at either end of the coupling can be configured independently in sizes ranging from small to large. Bores are machined to standard H7/H8 tolerances. Dimensions in the table are for reference only; custom specifications are available.

DLP Polygonal Rubber Coupling

DLP Polygonal Rubber Coupling

The DLP polygonal rubber coupling is a highly flexible coupling with a simple design. It requires no lubrication and is easy to assemble and disassemble. It provides effective vibration damping and cushioning, and compensates for axial, radial, and angular misalignment. It helps reduce torsional vibration and shock loads in drive shaft systems and prevents resonance. Operating temperature: -30 to 60°C. It is suitable for humid, dusty conditions involving impact and vibration, frequent changes in rotation direction, and frequent starts. Widely used in vibrating screens, light industry, construction machinery, mining machinery, and other industries, it transmits torque from 50 to 8,000 N·m. Made of 45# steel with a blackened surface finish, it comes with set screws. Custom non-standard designs and special materials are available. Models range from DLP1 to DLP71 to suit different torque ratings and installation requirements.

FBS06B Finished-Bore Sprocket

FBS06B Finished-Bore Sprocket

The FBS06B finished-bore sprocket is a standardized sprocket for 06B roller chains. It comes with a finished bore and can be mounted directly on a drive shaft without further machining, making it suitable for low-power drives in conveying, packaging, light industrial machinery, and similar applications. Designed for 06B chain, the series has a chain pitch P of 9.525 mm, chain inner width W of 5.72 mm, roller diameter Dr of 6.35 mm, and tooth width T of 5.3 mm. These dimensions are fully compatible with the internationally used 06B chain (equivalent in size to ANSI 35). The catalog lists dimensions by tooth count, including the corresponding tooth-count code, pitch circle diameter, outside diameter, root diameter, hub outside diameter, overall width, finished bore diameter, and keyway. Select the required sprocket from the table based on tooth count and shaft diameter. Made from medium-carbon or alloy steel blanks, the sprockets are formed by hobbing or shaping and heat-treated at the tooth surfaces. They offer accurate tooth profiles, smooth and quiet operation, and good wear resistance, making them a common alternative to imported standard sprockets in chain drive systems.

FBS25B Series Finished Bore Sprockets

FBS25B Series Finished Bore Sprockets

Shenma Transmission FBS25B finished bore sprockets are designed for 04C (25B) single-strand roller chain, with a chain pitch of 6.35 mm, inner chain width of 3.18 mm, roller diameter of 3.3 mm and tooth width of 2.8 mm. Available with 14~63 teeth, they have an outer diameter of 32~130 mm, pitch diameter of 28.54~127 mm, hub diameter of 20~35 mm, overall length of 15 mm and a unit weight of approximately 0.05~0.32 kg. The finished bore is machined to H7 tolerance and includes a keyway and threaded holes for set screws. Bore sizes of 10/12/15/16/18/20 mm are available, with corresponding keyways of 3×1.4, 4×1.8, 5×2.3 and 6×2.8 and threaded holes of M4/M5/M6. Made from high-quality 45 steel, the teeth are induction hardened and tempered. Custom 5U5304 stainless steel versions are available, with black oxide or zinc-plated finishes. Packaging consists of cartons and wooden cases.

FBS60B Finished Bore Sprocket

FBS60B Finished Bore Sprocket

The FBS60B finished bore sprocket is a Jiama Transmission product designed for 12A roller chain drive systems. Its finished bore allows it to be installed directly. Key catalog specifications include a chain pitch of 19.05 mm, chain inner width of 12.7 mm, roller diameter of 11.91 mm, tooth width of 11.7 mm, and 9 teeth. Designed for standardized chain drives, it is commonly used in conveyors, packaging equipment, agricultural machinery, and general industrial drives. Select the sprocket according to the chain number, tooth count, finished bore size, and available installation space to ensure proper chain engagement. The page's OCR table contains duplicate entries; refer to the specifications corresponding to chain number 12A.

FBS60SD Finished Bore Sprocket

FBS60SD Finished Bore Sprocket

The FBS60SD finished bore sprocket is suitable for 12A (No. 60) roller chain, with a chain pitch of 19.05mm, an inner chain width of 12.7mm, a roller diameter of 11.91mm, and a tooth width of 11.7mm. The bore is finish-machined at the factory for direct installation on a standard shaft, reducing on-site machining. Typically made from 45# steel or medium-carbon steel, the sprocket has induction-hardened teeth for good wear and impact resistance. It is widely used in conveyor, packaging machinery, agricultural machinery, and other drive systems. Refer to the specification table when selecting the number of teeth, bore diameter, and keyway dimensions.

G2M Timing Pulley

G2M Timing Pulley

G2M series high-torque curvilinear-tooth timing pulleys feature a curved tooth profile for smooth, quiet power transmission, making them suitable for high-torque drive systems. Pulleys are available in materials such as aluminum alloy (clear anodized) and 45 steel (blackened) to meet different operating requirements. Model specifications include the pulley code, number of teeth, tooth profile, nominal width, pulley shape, and bore shape, allowing users to select the right size for their application.

G2M Timing Belt

G2M Timing Belt

The G2M timing belt is a curvilinear-tooth belt with a 2 mm pitch, designed for precision drive systems. Its model number consists of the pitch length (mm) and the tooth profile code 2GM. Pitch lengths range from 88 mm to 738 mm, with 44 to 369 teeth. This series is available in a range of standard lengths to meet different drive requirements.

G2M Polyurethane Timing Belt

G2M Polyurethane Timing Belt

The G2M polyurethane timing belt is an open-ended belt made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. It is available with galvanized steel or aramid cord reinforcement. Six standard widths are offered: 6, 9, 12, 15, 20, and 50 mm. Its G2M curvilinear tooth profile delivers high transmission accuracy and load capacity. The maximum allowable load varies by belt width and cord material, ranging from 246 to 2,050 N for galvanized steel cord and 270 to 2,250 N for aramid cord. It is suitable for linear drives, reverse-bending configurations, and internal-tension curves. Tooth shear strength varies with speed, and the minimum number of teeth in mesh is 6. Custom colors are available to suit a wide range of applications.

G3M Timing Pulley

G3M Timing Pulley

G3M series high-torque curvilinear-tooth timing pulleys feature a curved tooth profile for smooth, quiet operation. Pulleys are available in aluminum alloy or 45Cr steel, with surface treatments including natural-color anodizing, non-blackened finishes, and black oxide finishes to suit different operating environments. They are widely used in automation equipment, machine tools, packaging machinery, and other applications requiring precise, high-torque power transmission.