Transmission Accessories — Page 7

Trapezoidal-Tooth Timing Belt
This series consists of L-profile trapezoidal-tooth timing belts with a 9.525 mm pitch, available in a range of lengths for general power transmission and precision positioning systems. Each model number consists of a number followed by the letter L; the number identifies the model and corresponds to a specific tooth count and length. The range includes 47 standard lengths, from 86L to 491L, with tooth counts ranging from 23 to 70 for selected models and lengths from 219.075 mm to 1257.375 mm. The belts feature a standard trapezoidal tooth profile and are designed for use with L-profile pulleys.

XH Series Trapezoidal Tooth
XH-series trapezoidal-tooth synchronous belts feature a standard trapezoidal tooth profile and are suitable for high-torque transmission. A range of sizes is available from 464XH to 1800XH, with 53–144 teeth and corresponding lengths from 1177.925 mm to 4572.000 mm. The belt pitch is? It is not specified, but these belts are commonly used in industrial power transmission. Applications include machine tools, automation equipment, and textile machinery.

Clamping-Type High-Torque Timing Pulleys
This series of clamping-type high-torque timing pulleys is available with three tooth profiles: S3M, S5M, and S8M. Made from aluminum alloy with a natural-color anodized finish, these pulleys offer high torque transmission capacity. They come with set screws and are suitable for precision drive systems. A range of tooth counts (such as 24, 30, and 36) and bore sizes (such as 4 mm, 6 mm, 8 mm, 10 mm, and 12 mm) is available to meet different installation requirements. The series also includes idler pulleys with ISO-standard rack dimensions, suitable for tensioning and guiding timing belt systems.

H Series Idler Gears
H Series idler gears conform to ISO standard rack dimensions and are available in a range of models, including BLAC, BSYC and BSPC, for power transmission in drive systems. Their standardized design ensures precise meshing with racks. They are widely used in automation equipment, machine tools and packaging machinery. Specifications include tooth count, tooth profile, nominal width and shaft diameter, allowing you to choose the right option for your needs.

XH and XXH Trapezoidal-Tooth Timing Belts
This series includes trapezoidal-tooth timing belts in two pitches, XH and XXH, designed for precision drives and heavy-duty applications. The XH pitch is 1/2 inch, while the XXH pitch is 1.25 inches (or the corresponding imperial specification). Their trapezoidal tooth profile provides efficient power transmission and high load capacity. The catalog lists a range of lengths from 464XH to 1800XH, with 53 to 144 teeth and belt lengths from 1,177.925 mm to 4,572 mm. These belts can replace comparable products from international brands such as Gates and Optibelt.

Idler Pulley Series
Idler pulleys are tensioning or guiding components in synchronous belt drive systems, used to adjust belt tension or change the direction of transmission. This series is made from high-quality steel or aluminum alloy and features a hardened surface for excellent wear resistance. Available in a range of tooth profiles (such as H8M and G2M), tooth counts, nominal widths, and shaft diameters, these idler pulleys are suitable for a variety of industrial synchronous belt drive applications.

BLAC Series Idler Pulleys
BLAC Series idler pulleys are tensioning or guide pulleys used in synchronous belt drive systems, typically consisting of a timing pulley and a bearing. The series offers a range of tooth profiles (such as G3M and G5M), tooth counts (30), nominal widths (20 mm and 90 mm), and shaft diameters (12 mm, with a 606 bearing). They are suitable for synchronous belt drives in automation equipment, packaging machinery, printing machinery, and other applications, helping maintain belt tension and stable operation.

Backside tensioning idler
Backside tensioning idlers are used against the back of the slack side in synchronous belt drive systems. They apply tension to prevent belt slippage and vibration, ensuring smooth operation. This series features precision rolling bearings for quiet operation and a long service life. The idler's outer ring is precision-machined to provide a large contact area with the back of the belt and minimize wear. A range of sizes is available, with idler designations from 9 to 199, widths (W) from 20 to ? mm, and outer diameters (D) from 25 to ? mm to suit different belt widths and installation spaces. They are typically made of steel or aluminum alloy with a hardened surface. Suitable for a variety of industrial automation equipment, packaging machinery, printing machinery, CNC machine tools, and more.

Timing Pulleys (BLAK/BSYK Series)
This series of timing pulleys is designed for ISO-standard racks. The BLAK designation indicates an aluminum alloy pulley with a natural anodized finish; BSYK indicates a pulley fitted with a 5*5C keyless bushing, also with a natural anodized finish. The tooth profile is T5, with nominal widths including 200 mm. The pulley has an F-type profile. Tooth counts range from 20 to 72, and bore diameters vary by model. These pulleys can be used with keyless bushings; see p. 81.

H Keyless Timing Pulley
The H keyless timing pulley uses a keyless connection and is suitable for a wide range of precision transmission systems. Featuring an ISO-standard tooth profile, it delivers smooth power transmission, high torque capacity, and easy installation. Available in various pulley shapes (E-type to ZZZ-type) and tooth profiles to meet different application requirements.

Taper bushing
A taper bushing is a connecting component that forms a press-fit connection between its outer tapered surface and the inner surface of a pulley or other drive component. Tightening the connecting screws locks the parts together as a single assembly. Standard taper bushings are available in a range of models, with different widths, large-end diameters, and pitch circle diameters, to suit drive connections for shafts of different diameters. Before installation, clean the surfaces and apply lubricant, then tighten the bolts in sequence using a torque wrench. Taper bushings are widely used in mechanical drive systems, providing keyless connections that are easy to install and remove.

Taper-Lock Bushes and Keyless Bushings
Taper-lock bushes and keyless bushings are friction-based shaft connection devices. Keyless bushings convert bolt-tightening force into pressure on the inner surface through a tapered interface, securely connecting a shaft to a hub without the need for keyway machining. They are suitable for applications involving frequent forward and reverse rotation and are less prone to developing play. Taper-lock bushes are pressed into the inner surface of a pulley or similar component via their outer taper, then secured through threaded holes to form an integrated assembly. Installation is simple, and the assembly can be easily removed using only bolts. Standard taper-lock bush sizes include 1008, 1108, 1210, and others, with a range of size options available.

Keyless Bushing (ST Bushing)
The keyless bushing (ST bushing) is a keyless connection element that secures a shaft to a hub by clamping tapered surfaces together. It offers high torque transmission capacity and axial positioning. The operating temperature range is -20°C to +80°C. The body is made of S45C steel with a black-oxide finish, and the bolts are made of SCM435 steel with a black-oxide finish. Standard E-type ST bushings are available in a range of bore diameters, d, from 8 mm to 71 mm and larger. They feature bolts in various sizes and threaded removal holes. Allowable maximum torque ranges from 16 N·m to over 171 N·m, and the allowable axial load is up to 8.74 kN. They are suitable for drive systems requiring precise alignment and quick installation.

Keyless Locking Bushings (MSM/MSMB Series)
The MSM/MSMB Series keyless locking bushings are keyless connection elements with a centering function. They are made of S45C with a black oxide finish, and use SCM435 bolts. They are suitable for temperatures from -20°C to +80°C. Bolts secure the bushing to create a keyless connection between the shaft and hub and transmit torque. The design is easy to install and provides reliable centering. The series includes two models, MSM and MSMB, with a range of bore diameters from 5 mm to 70 mm to accommodate different shaft sizes. These bushings are widely used in automation equipment, mechanical power transmission, and other applications.

Pulley Series
Pulley series products transmit motor rotational power through friction between the pulleys and conveyor belts. This friction creates tension to transfer power and convey materials. Designed for power transmission and conveying applications, they offer high transmission efficiency and stable operation. They are commonly used in the automotive, industrial machinery, and electronic components manufacturing industries. Available types include flanged, curved, and ribbed keyway pulleys, which can be used with conveyor belts for spans of any length. Important specifications include a belt groove width tolerance of ±0.2 mm and bearing mounting accuracy to GB 307 P0.

Short Pulley
The short pulley is a pulley assembly designed for light-duty guidance and transmission. It is made of aluminum alloy or steel, with finishes including clear anodizing, blackening, and electroless nickel plating. Model codes include DLAF (aluminum alloy), DSYF (blackened S45C), and DSPF (nickel-plated S45C). It has an outer diameter of 40 mm and a P10 bore (10 mm), with widths ranging from 11 mm to 292 mm to suit different installation requirements. Suitable for automation equipment, conveyor systems, and other applications.

Medium-Duty Pulley Series
The Medium-Duty Pulley Series includes pulleys in a variety of shapes, including flanged, straight-column, curved, and ribbed-groove designs. Materials include aluminum alloy (DLAH Series) and S45C steel (DSYH and DSPH Series), with finishes including clear anodizing, blackening, and electroless nickel plating. Designed for guiding and sliding applications in automated equipment, the series offers a range of mounting options and wear resistance.

Toothed clamping plate
A toothed clamping plate is a metal component with a serrated surface. Its teeth mesh with the grooves on a timing belt to secure it, joining the two open ends of an open-ended timing belt so it can transmit motion. Hexin Transmission offers clamping plates for open-ended timing belts used in reciprocating applications. They are commonly used with linear guides, linear motors, and other components for long-distance motion. Two types are available: bottom-locking and nut-fastened. Select the appropriate type based on belt width and mounting-hole spacing.

XL Series Rack Plates
The XL Series rack plates feature an overpressure-protection design for rack drive systems. Each plate consists of a rack and a main plate, and is available in a range of lengths from 25 mm to 8,450 mm, in 25 mm increments (some initial sizes are 25 mm, 37 mm, 50 mm, and 75 mm). Precision-machined to ensure stable meshing with the rack, they are suitable for automation equipment, machine tools, and other applications.

Trapezoidal-tooth timing belt
Trapezoidal-tooth timing belts are available in MXL, XL, L, H, XH, and XXH tooth profiles, which are standardized to ISO specifications and generally used for power transmission. The tensile cords are made of fiberglass, offering high strength, flexibility, dynamic bending performance, and resistance to tensile elongation. The belt body is made of a specially compounded rubber that resists oil, dirt, aging, and cracking. Nylon fabric on the tooth surface reduces operating noise and extends service life. These belts provide accurate, smooth, quiet transmission and offer antistatic properties. They are widely used in textiles, machine tools, tobacco, communications cables, light industry, chemicals, metallurgy, measuring instruments, food processing, woodworking, mining, petroleum, office equipment, papermaking, vending machines, mechanical tools, sewing machines, and other industries. A wide range of tooth counts and available pitch lengths meets diverse transmission requirements.

XL timing belt
The XL timing belt is a trapezoidal-tooth synchronous belt with a 5.08 mm pitch, widely used in light-duty drives and positioning systems. Common materials include polyurethane and chloroprene rubber, offering good wear and fatigue resistance. The series is available in a range of sizes from 42XL (21 teeth) to 256XL (128 teeth), with even tooth counts. Pitch lengths range from 106.68 mm to 650.24 mm in 5.08 mm increments to suit different center distances. The model designation consists of a number twice the tooth count followed by XL. For example, 42XL has 21 teeth and a pitch length of 106.68 mm.

L-Series Timing Belt
The L-series timing belt is a trapezoidal-tooth belt with a 9.525 mm pitch, designed for synchronous drive applications under moderate loads. It is widely used in industrial machinery, automation equipment, textile machinery, and more. This series is available in a range of sizes, with 23 to 127 teeth and pitch lengths from 219.08 mm to 819.15 mm to meet various drive requirements. Made from high-quality rubber and fiber-reinforced materials, these belts offer excellent wear resistance and tensile strength.

Timing Belts
This series of timing belts features two tooth profiles: H (12.7 mm pitch) and XXH (31.75 mm pitch). Designed with standard tooth profiles, they are suitable for high-precision synchronous transmission. H timing belts are available in various lengths, with pitch lengths ranging from 368.30 mm to 736.60 mm and 29 to 58 teeth. XXH timing belts have pitch lengths from 1778.00 mm to 4572.00 mm and 56 to 144 teeth. Standard widths include 50.8 mm, 63.5 mm, 76.2 mm, 101.6 mm, and 127.0 mm. These products are widely used in industrial automation, machine tools, textile machinery, and other fields.

XXH Timing Belt
XXH timing belts are extra-heavy-duty belts designed for heavy-load power transmission. The range covers sizes from 700XXH to 1800XXH, with pitch lengths from 1778.00 mm to 4572.00 mm. Five standard widths are available: 200 (50.8 mm), 250 (63.5 mm), 300 (76.2 mm), 400 (101.6 mm), and 500 (127.0 mm). Depending on the size, the belts have 56 to 144 teeth. Their high-strength tooth profile ensures smooth power transmission and strong load-bearing capacity.

T-Series Synchronous Belts
T-series synchronous belts feature ISO-standard tooth profiles and are available in four types: T2.5, T5, T10, and T20, with pitches of 2.5, 5, 10, and 20 mm, respectively. Designed for general conveying speeds and light-duty applications, they are widely used in packaging machinery, logistics conveyor lines, printers, and more. The core uses high-strength, flexible, stretch-resistant fiberglass cords. The specially compounded rubber body resists oil, dirt, and aging, while the nylon fabric facing on the teeth reduces noise. These belts provide accurate speed ratios, smooth power transmission, high speeds, and low noise, with some antistatic capability. The T2.5 type has a pitch-line length range of 105.0–5575.0 mm and 42–1260 teeth.

HTD 5M
HTD 5M curvilinear-tooth synchronous belt with a 5 mm pitch and a curved tooth profile. It offers smooth power transmission, low noise, high load capacity, and requires no lubrication. It is widely used in automation equipment, machine tools, packaging machinery, textile machinery, and other applications requiring precise synchronous transmission. Available in a range of standard lengths from 975 mm to 4260 mm, corresponding to 195 to 852 teeth. Belts are typically made of neoprene rubber or polyurethane, with embedded fiberglass or steel tensile cords for high strength and dimensional stability. The model code format is 5M-length; for example, 5M-975 indicates a belt length of 975 mm.

Timing belts
This series includes trapezoidal-tooth T10 timing belts and curvilinear-tooth HTD timing belts. T10 belts have a 10 mm pitch, pitch lengths of 340–1700 mm, and 34–170 teeth, making them suitable for general-purpose drives. HTD belts feature a curvilinear tooth profile and are available in 3M, 5M, 8M, 14M, and 20M pitches, corresponding to pitches of 3, 5, 8, 14, and 20 mm. They are suitable for high-torque, high-precision drives and are widely used in industries such as textiles, machine tools, tobacco, and automation equipment. The belts use fiberglass cords as the tensile member, a specially compounded rubber body, and nylon fabric on the tooth surface. They offer high strength, oil resistance, aging resistance, and low-noise operation.

STD Profile Curvilinear-Tooth Timing Belt
The STD profile is an improved version of the HTD curvilinear-tooth timing belt, offering high torque and high-precision power transmission. Available in pitches of S2M (2 mm), S3M (3 mm), S4.5M (4.5 mm), S5M (5 mm), S8M (8 mm), and S14M (14 mm). It features a fiberglass tensile cord and nylon fabric tooth facing for quiet operation and resistance to oil and dirt. Widely used in automated drive systems in textiles, machine tools, tobacco processing, food processing, and other industries.

G-Tooth Timing Belt
The G-tooth timing belt is a curvilinear-tooth belt available in four sizes based on pitch: G2M, G3M, G5M, and 8YU. It is typically used in high-torque, high-precision drive applications. Based on the HTD tooth profile, its refined curvilinear design optimizes the load distribution across the meshing surfaces of the belt and pulleys, delivering excellent positioning accuracy. Compared with trapezoidal teeth, it provides higher torque and transmission capacity. The belt’s tensile member is made of fiberglass cord, offering high strength, flexibility, excellent dynamic flex fatigue resistance, and low elongation under tension. Its body is made from a specially formulated rubber compound that offers a degree of resistance to oil and dirt, as well as resistance to aging and cracking. Nylon fabric on the tooth surface reduces operating noise and extends belt life. The belt provides an accurate transmission ratio, smooth and fast operation, low noise, and a degree of antistatic protection. It is widely used in office equipment, papermaking, packaging machinery, vending machines, financial equipment, machine tools, intelligent logistics, robotics, factory automation (FA) equipment, household appliances, and emerging smart electronic products.

P-Profile Timing Belt
P-profile timing belts have a curvilinear tooth profile, also known as a parabolic tooth profile. They are available in P3M, P5M, P8M, and P14M pitches and are typically used in high-torque, high-precision drive applications. A groove at the top of each tooth allows compressed air to escape, effectively reducing transmission noise. Compared with trapezoidal teeth, this profile delivers higher torque and greater transmission capacity. The tensile member consists of high-strength, flexible fiberglass cords with excellent dynamic flexing and tensile elongation properties. The belt body is made from a specially compounded rubber that offers some resistance to oil and dirt, as well as resistance to aging and cracking. Nylon fabric covers the tooth surface to reduce operating noise and extend belt life. These belts provide an accurate transmission ratio, smooth and fast operation, low noise, and a degree of antistatic protection. They are widely used in industries including textiles, office equipment, papermaking, automotive and motorcycle manufacturing, sanding, sterilization, conveying, annealing, bonding, drying, coding and marking, packaging, food processing, and mining.

Double-Sided Timing Belt
Double-sided timing belts combine the advantages of gear, chain, and belt drives while eliminating slippage and elongation. They offer a constant speed ratio, a wide speed range, a compact design, suitability for multi-shaft drives, resistance to oil and moisture, and no need for lubrication. They are widely used in machinery, textiles, instrumentation, petrochemicals, communications cables, and other fields. This series includes a range of trapezoidal-tooth models (DA-XL/L/H/XH) and T-tooth or curvilinear-tooth models (including DA-T5/3M/5M/8M/14M). With tooth pitches from 0.508 mm to 2.800 mm and tooth heights from 3.05 mm to 14.84 mm, the series meets a variety of drive requirements.

Rubber Open-Ended Timing Belt
Rubber open-ended timing belts are available in a range of tooth profiles, including trapezoidal, T-shaped, HTD, STD, P, and G profiles. They are suitable for linear reciprocating drives, long-distance positioning, and high-precision conveying over long distances. Made from high-performance rubber with fiberglass or aramid cord reinforcement, these belts offer high strength, low elongation, and resistance to oil, dirt, and aging. The tooth surface is covered with nylon fabric to reduce noise and extend service life. They deliver accurate, smooth, high-speed transmission, provide antistatic performance, and are easy to remove and replace. Common profiles include MXL, XL, L, H, 3M, 5M, 8M, and T2.5. Standard widths range from 6 mm to over 300 mm, and roll lengths vary from a few meters to hundreds of meters depending on the tooth profile and width. They are widely used in vending machines, automatic doors, modules, digital printing, 3D printing, and other industries.

Agricultural Machinery Wrapped V-Belt Series
The agricultural machinery wrapped V-belt series includes single and joined wrapped belts. They are suitable for agricultural machinery such as high-horsepower, high-throughput rice, corn, and wheat harvesters, as well as mining and construction machinery. The belts feature dual-layer, wide-angle flexible wrapping, high-strength aramid cords, fiber-reinforced base rubber, and a specialized structural design. They offer wear, oil, and aging resistance, handle heavy loads, resist slippage, and provide a long service life. Single wrapped belt models include HB, HC, SB, SC, HI, HK, and HM, with top widths of 17–50.8 mm, heights of 9–22.2 mm, angles of 30° or 40°, and lengths of 1,140–6,000 mm. The joined wrapped belt is model 9J-5, with an overall width of 50.5 mm, overall height of 9.7 mm, belt spacing of 10.3 mm, individual belt top width of 9.7 mm, individual belt height of 7.9 mm, and an angle of 40°.

Agricultural Machinery Wrapped-Band Joined V-Belt Series
The agricultural machinery wrapped-band joined V-belt series is suitable for high-horsepower, high-throughput rice, corn, and wheat harvesters, as well as mining and construction machinery. The series features a double-layer, wide-angle flexible fabric wrap to improve belt wear resistance and flexibility. High-strength aramid cords ensure low elongation and excellent adhesion, while fiber-reinforced base rubber provides high load capacity and helps prevent belt breakage. A special structural design gives the belt high rigidity, resistance to heavy loads, and excellent anti-slip performance. An optimized compound reduces heat buildup, withstands high and low temperatures, resists fatigue, and extends service life. Joined belts run smoothly and, compared with sets of individual belts, provide better overall transmission performance with less risk of rolling over, vibration, or coming off. The main model is 9J-5, with an overall width of 50.5 mm, overall height of 9.7 mm, pitch of 10.3 mm, single-belt top width of 9.7 mm, single-belt height of 7.9 mm, and an angle of 40°.

Agricultural Machinery Raw-Edge Belt Series
The agricultural machinery raw-edge belt series is suitable for high-horsepower, high-capacity rice, corn, and wheat harvesters and other agricultural machinery, as well as mining machinery and industrial equipment such as automotive engine drives, air compressors, compressors, and electric motors. The belts feature flexible wide-angle fabric, a high-modulus polyester or aramid cord tensile member, and a fiber-reinforced body. They offer high load capacity, low elongation, slip resistance, excellent wear resistance, low heat generation, and resistance to flex fatigue. Belt speeds can reach 50 m/s. The operating temperature range is -30°C to 100°C for CR and -40°C to 120°C for EPDM. Available cross-section profiles include HB, HC, HD, SB, SC, XPB, XPC, HI, HK, HM, HN, and HO, with angles of 40° or 30° and length ranges of 1,100–4,500 mm or 2,000–4,500 mm.

Agricultural Machinery Joined Raw-Edge Belt Series
This series of joined raw-edge belts for agricultural machinery is suitable for high-horsepower, high-throughput rice, corn, and wheat harvesters, as well as other agricultural equipment and industrial machinery such as mining equipment, automotive engine drives, air compressors, compressors, and electric motors. Flexible wide-angle fabric is used on the top to improve reverse-bending flexibility. The tensile cord reinforcement uses high-modulus polyester or aramid cords, providing high load capacity, low elongation, and excellent resistance to slippage. The fiber-reinforced body is rigid, dimensionally stable, and highly wear-resistant. An optimized tooth profile minimizes heat generation during operation and resists flex fatigue for a long service life and reduced maintenance. Belt speeds of up to 50 m/s are supported. CR material is suitable for temperatures from -30°C to 100°C, while EPDM is suitable for -40°C to 120°C. The belt runs smoothly; compared with multiple individually matched belts, the joined belt provides more effective overall power transmission and is less prone to rollover, vibration, or coming off. Available specifications include the 9J-5 joined belt, with an overall width of 50.5 mm, overall height of 9.7 mm, pitch of 10.3 mm, individual belt top width of 9.7 mm, individual belt height of 9.7 mm, and an angle of 40°.

ZX/AX/BX/CX Series Industrial Raw-Edge Belts
ZX/AX/BX/CX series industrial raw-edge belts are widely used in industrial equipment such as air compressors, fans, garden machinery, textile machinery, and CNC machine tools. Made with rubber-impregnated flexible cotton canvas, high-modulus, low-shrinkage polyester cords, and a fiber-reinforced composite compression layer, they offer resistance to high and low temperatures (-40°C to 120°C), wear, and oil, as well as high transmission efficiency. The molded teeth on the underside reduce heat buildup during operation, while the wear-resistant edge-forming process helps prevent slippage and wear. These belts provide high tensile strength, excellent flexibility, high load capacity, and low elongation. Available cross-sections include ZX (top width 9.7 mm, thickness 8.0 mm, angle 40°), AX (12.7 mm, 9.0 mm, 40°), BX (16.3 mm, 11.0 mm, 40°), and CX (21.5 mm, 13.0 mm, 40°). The ZX series is available in a range of lengths from ZX20 to ZX120, with reference lengths from 520 mm to 2,910 mm.

BX Series Industrial Raw-Edge Belts
The BX series industrial raw-edge belts are available in a range of cross-sections, from BX23 to BX73. Each size is listed with its imperial designation, inner circumference Li (mm), datum length Ld (mm), and corresponding AV17 size. The inner circumference ranges from 560 mm to 1,855 mm (based on the first table), making these belts suitable for industrial drive systems. Their standardized dimensions and performance meet a variety of drive requirements.

AX Series Industrial Raw-Edge Belts
AX Series industrial raw-edge belts are V-belts designed for power transmission. They offer wear resistance, oil resistance, and high tensile strength, making them suitable for the drive systems of a wide range of industrial equipment, including fans, pumps, and compressors. The series includes two main sizes, AX20 and AX25. Belt lengths are identified by numeric codes, while suffixes such as AV13X635Li indicate the cross-section and reference length. Made from high-quality rubber and fiber materials, these belts transmit power efficiently and help reduce vibration.

CX Series Industrial Cut-Edge Belts
CX Series industrial cut-edge belts are suitable for a wide range of industrial drive applications. The series offers sizes from CX25 to CX125, with inner circumferences of 760–2560 mm and reference lengths of 816–2561 mm. Each size corresponds to an AV22 model for easy replacement and compatibility. Made from high-quality rubber with reinforced cords, these belts are wear-resistant, heat-resistant, and have low elongation, ensuring efficient power transmission and a long service life.

XPZ/XPA/XPB/XPC Series Narrow V-Belts
The XPZ/XPA/XPB/XPC series narrow V-belts are high-efficiency drive belts designed for industrial applications requiring compact installation and high load capacity, such as diesel and gasoline engines, agricultural machinery, air compressors, fans, lathes, drilling machines, and mining equipment. They offer higher transmission efficiency than conventional wrapped belts and raw-edge belts. Their construction consists of rubber-impregnated flexible wide-angle fabric, high-modulus, low-shrinkage polyester cords, and a fiber-reinforced composite compression layer. Features: heat resistance from -40°C to 120°C; molded cogs on the underside reduce heat buildup during operation and make the belts suitable for small pulleys; special raw-edge shaping helps prevent slippage and wear; high-modulus, low-shrinkage cords reduce elongation; and the fiber-reinforced compression layer delivers greater power transmission. Cross-sectional dimensions: XPZ—top width 9.7 mm, thickness 9.0 mm; XPA—top width 12.7 mm, thickness 10.5 mm; XPB—top width 16.3 mm, thickness 13.5 mm; XPC—top width 21.5 mm, thickness 17.5 mm. All have a 40° angle. Add the reference length (mm) after the model designation to specify the belt, for example, XPZ 630.

Narrow V-Belt XPB/5VX Series
The XPB/5VX Series narrow V-belt is a high-efficiency drive belt featuring an XPB cross-section. It is available in a range of sizes with datum lengths (Ld) from 1,130 mm to 2,990 mm. Suitable for a wide variety of industrial drive equipment, including motors, pumps, and compressors, these belts are wear-resistant, stretch-resistant, and provide smooth power transmission. They comply with international standards.

Multi-ribbed belts, PH/PJ/PK/PL/PM series
Multi-ribbed belts are suitable for a wide range of outdoor drive systems, conveying equipment, medical devices, power tools, household appliances, and sports equipment. They offer excellent weather resistance and operate across a wide temperature range of -40°C to 120°C. Fiber-reinforced molded ribs provide excellent wear resistance and a long service life. The belts remain balanced at high speeds, reducing vibration and preventing slippage and wear. The strong bond between the tensile cords and rubber helps prevent premature fatigue failure. Available in five profiles—PH, PJ, PK, PL, and PM—with pitches of 1.6, 2.34, 3.56, 4.7, and 9.4 mm, respectively. Product categories include MVG ground multi-ribbed belts, MVM molded multi-ribbed belts, and MVB specialty multi-ribbed belts. A range of effective lengths is available, covering the EPH and PH series.

Multi-ribbed belts—PJ Series
The PJ series of multi-ribbed belts (also known as PJ poly-V belts) features a narrow rib pitch and is suitable for a variety of light-duty drive systems. The series is available in a range of lengths from EPJ219 to PJ1850, with effective lengths from 219 mm to 1,850 mm, and corresponds to the J series in imperial sizing (such as 160J to 1850J). Classified under product category MVVM, these belts have a standard PJ cross-section and offer wear resistance and smooth power transmission.

Multi-rib Belt — PK Series
The PK Series multi-rib belt is a factory automation component designed for low- to medium-power drive applications, such as automotive engine accessory drives and industrial machinery. It uses the PK cross-section and has effective lengths ranging from 700 mm to 4,000 mm. Available sizes include PK700–PK1000 in 10 mm increments, PK1020–PK1100 in 10 mm increments, PK1280–PK1850 in 10 mm increments, and PK2400–PK4000 in 50 mm increments, with more than 100 models in total. These belts are oil- and heat-resistant and operate with low noise, meeting a range of center-distance and drive requirements. The product category code is MVG. The series offers reliable quality and consistent performance.

PL Series Multi-Ribbed Belts
PL Series multi-ribbed belts are designed for industrial power transmission and are suitable for a wide range of mechanical drive applications. Made from polyurethane or rubber, these belts offer high transmission efficiency and low noise. Model numbers begin with PL followed by the effective length. The product category is MVG, and the common module is 8. Effective lengths range from 762 mm to 2656 mm, covering a variety of imperial sizes. With excellent wear, oil, and aging resistance, these belts are widely used in machine tools, textile machinery, packaging equipment, and more.

PM Series Multi-Rib Belts
The PM Series multi-rib belt is a drive belt with multiple grooves, designed to deliver high torque transmission and reliable performance. Its model number consists of “PM” followed by the effective length in millimeters; for example, PM1270 has an effective length of 1270 mm. The product category is MVG. These belts are suitable for a variety of industrial machinery drive systems, including machine tools and automation equipment.

Rubber flat belt
Rubber flat belts are suitable for a wide range of applications, including drive systems, textile equipment, logistics equipment, medical devices, woodworking machinery, and automation equipment. They offer excellent weather resistance and operate at temperatures from -20°C to 90°C. The specially formulated rubber compound provides excellent wear resistance and a long service life. The belts remain balanced at high speeds, reducing vibration and preventing slipping and wear. The core cords are exceptionally well bonded to the rubber, helping prevent premature fatigue failure. Standard flat belt models include F07, F10, F12, F15, F17, F20, F25, F30, and F40. Thickness: 0.7–4.5 mm; breaking strength: ≥120–230 N/mm; minimum pulley diameter: 10–35 mm; tension at constant elongation: 0.7–29.4 N/mm; length: 200–4500 mm. High-performance flat belt models include F25/BH, F25/BN, and F25/BL. Overall thickness: 5–11 mm; breaking strength: ≥230 N/mm; minimum pulley diameter: 80 mm; length: 600–4500 mm. These belts offer special properties such as wear resistance, colorfastness, and feed force. All belts are antistatic.