Rolling bearings — Page 2

TAC Series Thrust Angular Contact Ball Bearings

TAC Series Thrust Angular Contact Ball Bearings

The TAC series consists of high-precision thrust angular contact ball bearings designed specifically for ball screws. Their boundary dimensions conform to the international BS standard. With a 60° contact angle, they accommodate combined loads that are predominantly axial and can be freely combined in multiple rows, including back-to-back arrangements such as DBB. The bearings feature a rolling-element-guided polyamide resin cage (TN1), while the 60° contact angle provides both high axial rigidity and high-speed capability. The basic series offers bore diameters of d=15~60mm, outside diameters of 47~120mm, widths of 15/20mm, basic dynamic load ratings of 21.9~67.5kN, static load ratings of 26.6~130kN, limiting speeds of 1800~6000r/min with grease and 2300~8000r/min with oil, and masses of 0.135~1.11kg. The sealed series features 2RSH high-speed seals and P4 precision. The seals prevent contaminants such as plastic, wood and metal chips and cutting fluid from entering the bearing, helping prevent the approximately 40% of premature screw bearing failures caused by contamination. Lifetime lubrication makes the bearings maintenance-free and eliminates the need for an oil lubrication system. Applications include machine tool screw support and precision transmission.

TAC Series Angular Contact Thrust Ball Bearings

TAC Series Angular Contact Thrust Ball Bearings

TAC series angular contact thrust ball bearings, available in unsealed B type and sealed 2RSH/P4 designs, are high-precision bearings designed specifically for ball screw support. They have a 60° contact angle and a rolling-element-guided polyamide resin cage (TN1). Their boundary dimensions conform to the international BS standard, and they can be freely combined. Sealed versions feature lifetime grease lubrication and high-speed seals that prevent contaminants such as plastic, wood chips, metal chips, and cutting fluid from entering the bearing. Approximately 40% of premature machine tool screw bearing failures are caused by contaminant ingress; the seals effectively extend service life and enable maintenance-free operation without an oil lubrication system. Bore diameter: 15~60mm; outer diameter: 47~120mm; width: 15~20mm; dynamic load rating: 21.9~67.5kN; limiting speed with grease lubrication: 1800~6000 r/min.

H Series Ultra-High-Speed Motorized Spindle Bearings (Steel Balls)

H Series Ultra-High-Speed Motorized Spindle Bearings (Steel Balls)

The H series comprises ultra-high-speed angular contact ball bearings for grinding and engraving/milling motorized spindles. Their internal parameters are analytically optimized to minimize rolling element slippage at high speeds. They are suitable for grease, oil mist, oil-air, and oil jet lubrication. The range includes the H70, H72, and H719 series, with contact angles of C (15°) or AC (25°). Rolling elements are steel balls (unmarked) or ceramic balls (HQ1). Cages are outer-ring-guided phenolic resin cages (unmarked) or inner-ring-guided polyamide resin cages (TN1). The high-precision series is available only in P4 and P2 grades and can be preloaded at constant pressure for high-speed and ultra-high-speed operation. The range covers bore diameters of 15~90mm. The table lists parameters including d, D, B, minimum chamfer r, rated dynamic/static loads, limiting speeds for grease/oil lubrication, and reference mass.

B Series Spindle Bearings (Steel Balls)

B Series Spindle Bearings (Steel Balls)

B series spindle bearings with steel balls are high-speed, high-precision bearings primarily used in motorized spindles for grinding, engraving and milling. Their internal parameters are specially optimized for motorized spindle applications, with low temperature rise under grease lubrication. The range includes the B70 and B72 series, with a 15° contact angle. Cage options are an outer-ring-guided cage for static grease lubrication (no designation) and a ball-guided PEEK cage (no designation). Rolling elements are steel balls (no designation) or ceramic balls (HQ1). The high-precision series is available only in P4 and P2 grades. These bearings are suitable for high and ultra-high speeds with constant-pressure preload, and can be lubricated with grease, oil mist or oil-air systems. Main dimensions: bore diameter 10mm to 90mm, outside diameter 26mm to 160mm, width 8mm to 30mm. Basic dynamic load rating: 3.0kN to 131.3kN. Limiting speed with grease lubrication: 8000 to 80000 r/min.

ERBC Series Crossed Roller Bearings

ERBC Series Crossed Roller Bearings

ERBC series crossed roller bearings feature rollers arranged at 90° to one another, allowing them to support radial, axial and moment loads simultaneously. They offer high rigidity, high rotational accuracy and a compact, thin-wall design. The catalog covers bore diameters of 20–1250 mm, outer diameters of 36–1500 mm and widths of 8–110 mm. For each model, it specifies bore diameter, outer diameter, inner ring width and outer ring width tolerances, pitch diameter, and inner and outer ring shoulder dimensions. Three accuracy grades (inner ring runout) are available: P5, P4 and P2, along with three clearance configurations: CC0 (preload), CO (positive clearance) and C1 (large clearance). Static load Cor, dynamic load Cr and weight are also listed. Model numbers consist of the ERBC prefix followed by bore diameter and width figures (for example, ERBC2008 has a 20 mm bore diameter and an 8 mm width). These bearings are commonly used in the rotating sections of CNC rotary tables, swiveling milling heads, direct-drive motors and precision testing equipment. Internal or external gears, additional flanges, surface heat treatment, and matching bearing housings and shafts can be customized.

ERBS Series Constant-Section Thin-Wall Bearings

ERBS Series Constant-Section Thin-Wall Bearings

ERBS series constant-section thin-wall bearings are precision ball bearings with a constant radial cross-section and thin walls. They are suited to applications with limited space that require low weight and high rigidity, such as robot joints, aerospace, medical devices, semiconductor equipment and precision rotary mechanisms. The series has bore diameters of 50~200 mm, outside diameters of 66~226 mm and two width options of 8 mm and 13 mm. Pitch diameters range from 57~212 mm, inner ring shoulder diameters from 53.5~205 mm and outer ring shoulder diameters from 60.5~219 mm. Static load ratings are 7.19~54.7 kN and dynamic load ratings are 5.1~25.8 kN. Options include P5/P4 inner ring runout grades, CC0 preload and CO positive clearance. Each bearing weighs 0.08~0.71 kg.

ERBH Series Constant-Section Thin-Wall Bearings

ERBH Series Constant-Section Thin-Wall Bearings

The ERBH series consists of precision constant-section (thin-wall) bearings with inner and outer rings of equal width. The range includes 19 sizes, with inner diameters of 20~250mm, outer diameters of 36~310mm, and widths of 8~25mm. The catalog specifies inner diameter d, outer diameter D, inner ring width B, outer ring width B1, pitch diameter Dpw, inner ring shoulder ds, outer ring shoulder Dh, and their respective tolerances. It also lists P5, P4, and P2 inner/outer ring runout values, preload groups (such as 0/-0.010 and 0/-0.020), positive clearance groups (0/0.010 and 0/0.025), large clearance groups (0.010/0.020, 0.010/0.025, 0.020/0.050, and 0.025/0.060), and reference weights for each size. These bearings are suitable for industrial robot joints and reducers, precision rotary tables, semiconductor and medical equipment, optical instruments, and other applications with limited cross-sectional space that require high rigidity and low runout. Select a model by its inner diameter and width, then choose the P5/P4/P2 accuracy class and preload or clearance group according to the equipment's precision and rigidity requirements.

ERBF-X Series Crossed Roller Bearings

ERBF-X Series Crossed Roller Bearings

The ERBF-X series comprises crossed roller bearings with mounting holes in both the inner and outer rings. Their rollers are arranged at 90° to one another, allowing them to support radial, axial and moment loads simultaneously. They offer high rigidity, high rotational accuracy and a compact design. Applications include robot joints, precision rotary tables, indexing tables, medical equipment and rotary mechanisms in industrial automation. Models cover inner diameters of 10~350 mm and outer diameters of 52~540 mm, with P5/P4/P2 runout grades and preload or positive clearance options. The main difference between G and X types is the outer ring mounting hole design: the X type uses threaded holes.

EDRX/EFSX Series Thin-Section Bearings

EDRX/EFSX Series Thin-Section Bearings

EDRX/EFSX series thin-section bearings are suitable for precision rotating assemblies with limited installation space, such as robot joints, precision rotary tables, and indexing tables. The EDRX type is available in 15 sizes, with bore diameters of 100~900 mm and outer diameters of 185~1100 mm. Bore tolerances range from 0/-0.020~0/-0.100 mm and outer diameter tolerances from 0/-0.030~0/-0.100 mm. The EFSX type is available in 13 sizes, with bore diameters of 70~500 mm and outer diameters of 90~620 mm. Inner and outer ring widths, pitch circle diameter, and inner and outer ring mounting-hole pitch circle diameters are also specified. Bore tolerance is tightened to 0.004~0.008 mm, width tolerance is 0/-0.010~0/-0.050 mm, and mounting-hole pitch tolerance is ±0.06~±0.16 mm, facilitating direct bolting to adjacent structures. Select the size by matching the bore diameter, outer diameter, and tolerance class to the equipment shaft system's accuracy requirements.

EFSX Series Crossed Roller Bearings

EFSX Series Crossed Roller Bearings

The EFSX series consists of thin-section crossed roller bearings with the same dimensions as the SX0118 series. Rollers are arranged at 90° to one another, allowing the bearings to accommodate radial loads, axial loads in both directions, and overturning moments simultaneously, with high rigidity and rotational accuracy. Model numbers consist of EFSX + bore diameter + width; for example, EFSX7010 denotes a bore diameter of 70mm and a width of 10mm. The catalog covers 13 sizes with bore diameters of 70~500mm, outside diameters of 90~620mm, and widths of 10~56mm. Bore diameters have unilateral negative tolerances starting at 0.004~0.008mm; outside diameter tolerance is 0~-0.044mm, inner ring width tolerance is 0/-0.010~0/-0.050mm, and outer ring width tolerance is ±0.060~±0.160mm. The catalog also specifies the pitch circle diameter and the mounting hole pitch circle dimensions (center distances) for the inner and outer rings, facilitating direct bolt mounting. These bearings are widely used in applications requiring high rigidity and rotational accuracy, including robot joints, precision rotary tables, indexing tables, radar, and medical equipment.

EFXU Series Bearings

EFXU Series Bearings

The EFXU series consists of slewing bearings (turntable bearings) with mounting holes in the inner ring. The catalog provides a complete range of dimensions and tolerances in tabular form. The series covers inner diameters of 40~384 mm (including the imperial conversions of 76.2, 101.6, and 215.9 mm for EFXU7616, EFXU10222, and EFXU21626, respectively), outer diameters of 112~646 mm, inner ring widths of 13~79 mm, outer ring widths of 15.87~79 mm, and assembly heights of 15.87~86 mm. Each size specifies the inner diameter tolerance (e.g., 0/0.020), outer diameter tolerance (e.g., 0/-0.040), assembly height tolerance (±0.050~±0.300), pitch circle diameter Dpw, inner ring mounting hole pitch circle PCD1, and the type and number of inner ring mounting holes (M8 and M10 threaded holes, φ6.9, φ8.7, φ11, φ14, φ18, and φ26 through holes, and counterbored versions). The ZT model suffix denotes a variant with inner and outer diameters different from the standard model. These bearings are suitable for load-bearing and drive structures in low-speed rotation, oscillation, or positioning applications.

EXSU Series Bearings

EXSU Series Bearings

EXSU series bearings are listed in the catalog under both EXSU and EFXU designations, covering bore diameters from 40mm to 1024mm. Key dimensions include bore diameter d, outside diameter D and its upper and lower deviations, inner ring width B, outer ring width B1, assembly height H and its tolerance, pitch circle diameter Dpw, and inner ring mounting hole pitch circle PCD1 and hole type (such as 6-M8, 12-φ11, and 20-φ14; some have φ6.9 holes with φ11 counterbores 6.4 deep). Tolerances vary by size: smaller sizes typically have bore tolerances of 0/0.020 and outside diameter tolerances of 0/-0.040; medium and large sizes use wider tolerances of 0/0.063 and 0/-0.063, respectively, while assembly height tolerances increase from ±0.050 to ±0.150 or ±0.300. Models with the ZT suffix have dimensions similar to standard models and are distinguished by their structure or variant. This series is widely used in rotary tables, indexing tables, articulated mechanisms, and other applications requiring high rigidity and rotational accuracy.

EFRT Series Rotary Table Bearings

EFRT Series Rotary Table Bearings

The EFRT series comprises precision rotary table bearings, including the ERTS variant, for applications such as machine tool rotary tables, indexing tables and CNC rotary tables that must simultaneously support axial loads, radial loads and tilting moments. Most bearings are supplied preloaded and use a combined axial and radial cylindrical roller arrangement. A reinforcing ring (VSP) can be added to increase shaft system rigidity. The model designation combines bore diameter, cage material (M for brass cage / TV for nylon cage), tight height tolerance (H1 or H1H2), mounting requirements or clearance (VSP for a reinforcing ring, RL0 for reduced preload, blank for the normal standard), and runout accuracy class (P4 / P2). Dimensional tolerances are uniformly specified to P5. Bore sizes range from 50~1200 mm, with an operating temperature of -30℃~+120℃ (-20℃~+80℃ recommended for precision equipment). An H5 shaft tolerance and J6 housing tolerance are recommended, using a transition fit.

EFRT/ERTS Series Turntable Bearings

EFRT/ERTS Series Turntable Bearings

EFRT/ERTS series turntable bearings are high-rigidity precision turntable bearings (slewing bearings) with mounting holes in the inner and outer rings. They are used in machine tool rotary tables, indexing tables, vertical-to-horizontal conversion heads, and other applications requiring simultaneous support of axial loads, radial loads, and tilting moments. The bearings are generally supplied preloaded. Transition fits are recommended for the shaft and bearing housing (shaft tolerance h5 and housing tolerance J6). Radial clearance is under preload; VSP, RL0, and the standard version refer only to axial clearance. Brass cages (M) or nylon cages (TV) are available. Height tolerances are available in the tighter H1 or H1H2 grades. Mounting configurations include VSP with a reinforcing ring, RL0 with reduced preload, and the standard version. Runout accuracy is available in P4/P2; dimensional tolerances for all bearings conform to P5. Bore diameters range from 50~1200mm, and the operating temperature is -30℃~+120℃. Actual friction torque is approximately 2~2.5 times the static value in the table (approximately 1.5 times for the high-speed type).

EFRT Series Bearings

EFRT Series Bearings

EFRT series bearings are medium- to large-sized bearings with mounting screw holes in the end faces of the inner and outer rings. The 17 sizes cover bore diameters of 50~1200mm, outside diameters of 126~1490mm and bearing heights of 30~164mm. The catalog specifies five dimensions: bore diameter, outside diameter, bearing height, height 1 and height 2. It lists unilateral negative tolerances for bore and outside diameters (e.g., 0/-0.008 for a 50mm bore and 0/-0.075 for a 1200mm bore), symmetric height tolerances (±0.250~±0.600), and normal and strict tolerance options for heights 1 and 2, allowing selection according to equipment accuracy requirements. Before installation, clean the parts and tools, then fit the bearing using a heater or dedicated mounting tool. Never apply force through the rolling elements or strike the non-fitted ring. Use a torque wrench to tighten the inner and outer ring end-face screws in a crosswise sequence, in three stages at 40%, 70% and 100% of the standard torque. Check installation accuracy with a dial indicator on a magnetic base, paying particular attention to the shoulder depth dimension. Bearings are supplied prefilled with grease according to the fit requirements. Oil lubrication can be used instead to suit the customer's operating conditions, in which case only rust-preventive oil is retained; different grades of

EKLDF Series Rigid Bearings for Harmonic Drive Reducers

EKLDF Series Rigid Bearings for Harmonic Drive Reducers

EKLDF series rigid bearings for harmonic drive reducers feature crossed cylindrical rollers arranged perpendicular to each other at 90° in a V-shaped raceway. They can simultaneously accommodate axial loads, radial loads, and overturning moments. Depending on the application, they are available in two configurations: a split outer ring with an integral inner ring, or integral outer and inner rings. They offer high precision, high rigidity, and combined load capacity. The range covers d=100~650 mm in 11 sizes and is suitable for harmonic drive reducers, robot joints, and precision rotary mechanisms.

CSG(CSF) Series Rigid Bearings for Harmonic Reducers

CSG(CSF) Series Rigid Bearings for Harmonic Reducers

CSG/CSF series rigid bearings for harmonic reducers feature a crossed cylindrical roller design, with rollers arranged perpendicular to each other at 90° in a V-shaped raceway. They simultaneously accommodate axial loads, radial loads, and overturning moments, providing high precision, high rigidity, and combined load capacity. Depending on the application, they are available in two main configurations: a split outer ring with an integral inner ring, or integral outer and inner rings. Rigid bearing series include CSG(CSF), CSD, and SHG(SHF). This page lists 11 sizes with bore diameters d=100~650mm, along with overall and mounting dimensions including d, H, H1, D1, D2, D3, J, J1, and a, as well as mounting hole specifications for the inner and outer rings. These bearings are suitable for harmonic reducer output support and precision rotary applications.

CSD Series Rigid Bearings for Harmonic Drives

CSD Series Rigid Bearings for Harmonic Drives

Rigid bearings for harmonic drives feature crossed cylindrical rollers arranged at 90° to one another in a V-shaped raceway. They simultaneously accommodate axial loads, radial loads, and overturning moments, offering high precision, high rigidity, and strong combined-load capacity. Depending on the application, they are available in two main designs: a split outer ring with an integral inner ring, or integral inner and outer rings. Rigid bearing series include CSG(CSF), CSD, and SHG(SHF), and are commonly used in precision drive applications such as harmonic drives, robot joints, and precision rotary tables. This page lists EKLDF specifications with bore diameters d=100~650 mm, outer diameters of 185~870 mm, and heights of 38~122 mm. Mounting hole and raceway dimensions are also provided to support selection and installation design.

SHG(SHF) Series Rigid Bearings for Harmonic Reducers

SHG(SHF) Series Rigid Bearings for Harmonic Reducers

Rigid bearings for harmonic reducers use a crossed cylindrical roller design, with cylindrical rollers arranged at 90° to one another in V-shaped raceways. They can simultaneously support axial loads, radial loads, and tilting moments, providing high precision, high rigidity, and combined load capacity. Depending on the application, they are divided into two main types: split outer ring with integral inner ring, and integral inner and outer rings. The rigid bearing range comprises four series: CSG(CSF), CSD, SHG(SHF), and SHG(CSF). The catalog lists 11 sizes from EKLDF100 to EKLDF650, with bore diameter d ranging from 100mm to 650mm. Overall height, mounting hole dimensions, and other dimensions increase with bore diameter. These bearings are widely used in precision transmission applications such as industrial robot joints and harmonic reducers.

CSD Flexible Bearings for Harmonic Drive Reducers

CSD Flexible Bearings for Harmonic Drive Reducers

Flexible bearings for harmonic drive reducers are available in CSD, SHD and other configurations. The CSD type has one-piece inner and outer rings and the same outside diameter as the CSG type, but offers greater rigidity. It is used at the output of CSD series reducers. The SHD type has a one-piece toothed inner ring that meshes directly with the flexspline teeth. It is lower in height than the SHG and is used at the output of SHD series reducers. These thin-walled bearings deform elastically when fitted to a cam and are subjected to alternating stress. The inner and outer rings and rolling elements are made of high-carbon chromium bearing steel, and the cage is a one-piece nylon design. The catalog lists the dimensions of CSG(CSF)-14~-65 bearings (d, D, H, C, B, H2, D1, D2, d1, d2). The operating temperature range is -20℃~+80℃. The bearings are filled with lithium complex grease and preloaded before shipment.

Flexible Bearings for SHD Harmonic Reducers

Flexible Bearings for SHD Harmonic Reducers

Flexible bearings for SHD harmonic reducers feature one-piece outer and inner rings. The inner ring has teeth that mesh directly with the teeth on the flexspline. Their lower profile compared with the SHG type saves installation space, and they are primarily used at the output of SHD series reducers. The thin-walled flexible bearing is subject to alternating stress and deforms to a degree when fitted to the cam. The inner and outer rings and rolling elements are made of high-carbon chromium bearing steel, and the cage is a one-piece nylon design. The bearings are filled with high-quality lithium complex grease and preloaded before leaving the factory; no relubrication is required under normal operating conditions. The operating temperature is -20℃~+80℃, and aluminum alloy or cast iron is recommended for mating components. Consult the manufacturer if the required dimensions are not listed in the accompanying table or differ from those shown.

CSG(CSF) Flexible Bearings for Harmonic Reducers

CSG(CSF) Flexible Bearings for Harmonic Reducers

Flexible bearings for harmonic reducers are thin-walled flexible ball bearings designed primarily to withstand alternating stresses. Their thin walls undergo controlled elastic deformation when paired with an elliptical cam, driving the flexspline into periodic meshing engagement. They are core components of harmonic reducers. The inner and outer rings and rolling elements are made of high-carbon chromium bearing steel, while the cage is a one-piece nylon structure. Before shipment, trained assembly personnel adjust the preload and fill the bearing with high-quality lithium complex grease. No relubrication is required under normal operating conditions. Both the outer and inner rings are one-piece structures, and the outer diameter matches that of the CSG type. These bearings are mainly used at the output of CSD series reducers. The same series also includes variants such as the CSD type, which has one-piece inner and outer rings and a toothed inner ring that can mesh directly with the flexspline teeth. It has a lower height and is used at the output of SHD reducers. The bearing operating temperature range is -20℃~+80℃. Aluminum alloy or cast iron is recommended for mating components. Models are classified by reducer frame size (14, 17, 20, 25, 32, 40, 50, 65), with each frame size corresponding to specific dimensions such as d, D and H, and mounting hole positions.

SHG(SHF) Series Crossed Roller Bearings

SHG(SHF) Series Crossed Roller Bearings

The SHG(SHF) series comprises thin-section crossed roller bearings in seven sizes: 14, 17, 20, 25, 32, 40, and 50. SHG and SHF models in the same size share the same overall dimensions. The bearing bore diameter d is 38~135mm, the outer diameter D is 70~214mm, and the assembled height H is 15.1~36mm. Mounting and mating dimensions including d3, C, B, B1, d1, and d2 are also provided. The series features a single row of rollers arranged crosswise at 90°, allowing it to support radial, axial, and tilting moment loads simultaneously. It offers high rigidity, high rotational accuracy, and a compact design, and is commonly used for rotary support at harmonic drive outputs, industrial robot joints, precision rotary tables, and semiconductor equipment. When selecting a model, use the size code (14~50) to determine the inner and outer diameters and mounting hole positions. During installation, ensure that the inner- and outer-ring bolts are preloaded evenly.

CSD Series Crossed Roller Bearings

CSD Series Crossed Roller Bearings

CSD series crossed roller bearings have a thin-walled structure with rollers arranged at 90° to one another and mounting holes integrated into both the inner and outer rings. They offer high rigidity and precision in a space-saving design and can simultaneously support radial loads, axial loads, and overturning moments. The catalog covers 7 sizes from CSD-14 to CSD-50, with inner diameters of 12~48 mm, outer diameters of 55~157 mm, overall heights of 16.6~34 mm, basic dynamic radial load ratings of 7~49.5 kN, static load ratings of 10.7~85 kN, and weights of 0.24~3.8 kg. Applications include industrial robot joints, precision rotary tables, measuring instruments, medical equipment, and semiconductor manufacturing equipment.

XR/JXR Series Crossed Tapered Roller Bearings

XR/JXR Series Crossed Tapered Roller Bearings

XR/JXR series crossed tapered roller bearings use a steep contact angle and tapered geometry to increase the overall effective bearing span. The extended lines of the tapered roller rolling surfaces intersect on the bearing's axis of rotation. The rollers roll without sliding relative to the raceways, resulting in a much higher limiting speed and lower frictional torque than crossed cylindrical roller bearings. Each bearing consists of one outer ring, two split inner rings, crossed tapered rollers and nylon spacers. Line contact between the rollers and raceways allows the bearing to support radial loads, axial loads and high overturning moments simultaneously. A single bearing can replace a conventional bearing assembly, offering a compact cross-section and high rigidity. Adjustable preload extends bearing life and improves rigidity and runout accuracy. The nylon sealing ring has low inertial mass and little effect on operating torque. The finished components are supplied unassembled and installed by the user through alignment and preloading. The gap between the inner rings provides lubrication, and lifting holes in the outer ring simplify installation. Bore diameter: 203.2~1549.4mm; outside diameter: 279.4~1828.8mm; height: 31.75~114.3mm; basic radial dynamic load rating: 51.2~516kN; axial dynamic load rating: 61.4~698kN; limiting speed (oil): 80~800r/mi

RV Series Crossed Roller Bearings

RV Series Crossed Roller Bearings

The RV series of crossed roller bearings is available in three configurations: RV-E, RV-C and RV-CA. Model designations consist of RV followed by a size code, with ten sizes ranging from 20 to 320. These thin-section bearings have rollers arranged at 90° to one another in V-shaped raceways. A single bearing can simultaneously support radial loads, axial loads in both directions and overturning moments. Features include a compact design, high rigidity, high rotational accuracy, low starting friction torque and long service life. The catalog lists the bore diameter d and outer diameter D (in mm) for each model to assist with selection based on available mounting space and the design of mating components. The series is widely used in applications requiring high rigidity and rotational accuracy, including machine tool rotary tables, vertical boring and grinding machine tables, precision indexing tables, large gear hobbing machines, turntables and industrial robot joints. To select a bearing, first determine the size code based on mounting space and load requirements, then choose the final model according to preload, lubrication and sealing conditions.

ERBS Series Crossed Roller Bearings

ERBS Series Crossed Roller Bearings

The ERBS series consists of thin-section crossed roller bearings with a single row of rollers arranged alternately at 90°. They can simultaneously support radial loads, axial loads in both directions, and overturning moments, while offering a thin cross-section, high rigidity, and high rotational accuracy. Catalog models are designated as “ERBS+bore diameter+width” and cover bore diameters of 50~200mm. They are available in two width ranges: 8mm (ERBS5008~ERBS15008) and 13mm (ERBS16013~ERBS20013). They correspond to and are interchangeable with the THK RA series and IKO CRBS series. Available accuracy grades are P5, P4, and P2. Typical applications requiring high rigidity and rotational accuracy include CNC rotary tables on machining centers, swiveling milling heads, direct-drive motors, robot joints, and test equipment. In addition to standard models, internal or external gear teeth, additional flanges, surface heat treatment, and matching bearing housings and shafts can be customized to suit operating conditions. Final specifications are subject to drawings approved by both parties.

ERBH Series Crossed Roller Bearings

ERBH Series Crossed Roller Bearings

ERBH series crossed roller bearings feature rollers arranged at 90° to one another between the inner and outer rings. A single bearing can simultaneously support radial loads, axial loads in both directions, and overturning moments. They offer a compact design, high rigidity, and high rotational accuracy. The series has an integral inner or outer ring (corresponding to the IKO CRBH/CRBHV series) and requires no additional adjustment shims during installation. It enables highly rigid, precise rotary motion in applications such as robot joints, CNC indexing tables, rotary worktables, precision rotary tables, medical equipment, and semiconductor equipment. The catalog lists models from ERBH2008 to ERBH25025 by bore diameter and width, with bore diameters of approximately 20~250 mm and widths of 8~25 mm. Users can select a model based on available mounting space and load requirements. Corresponding sizes are directly interchangeable with IKO CRBHV bearings.

ERBF Series Crossed Roller Bearings

ERBF Series Crossed Roller Bearings

ERBF series crossed roller bearings feature a compact design with rollers arranged at 90° to one another. They simultaneously support radial, axial and moment loads, offering high rigidity, high rotational accuracy and space-saving installation. They are suitable for robot joints, rotary tables, machine tool indexing tables and precision rotary mechanisms. Model numbers consist of ERBF followed by the bore diameter and width; for example, ERBF1008 has a bore diameter of 10 mm and a width of 8 mm. Some sizes are available in (G) and X variants. The catalog provides a model-by-model correspondence with the THK RU series to simplify selection and replacement.

EFXU Series Crossed Roller Bearings

EFXU Series Crossed Roller Bearings

The EFXU series consists of full-complement crossed roller bearings with rollers arranged alternately at 90° to one another in a 90° V-shaped raceway. They accommodate radial loads, axial loads in both directions, and tilting moments simultaneously. Their high rigidity, high rotational accuracy, and compact axial dimensions make them suitable for rotary positioning applications such as robot joints, CNC indexing tables, machine tool rotary tables, radar, and medical equipment. Corresponding to the INA XU series, these bearings have integral inner and outer rings. Model numbers consist of EFXU followed by a size code, with sizes ranging from small and medium-light models to large models with outside diameters exceeding 400 mm. Some models have a ZT suffix denoting a structural variant. Select the appropriate size based on bore diameter, outside diameter, width, dynamic and static load ratings, and tilting moment. During installation, ensure the mounting surfaces are sufficiently flat and rigid to take full advantage of the bearing's high rigidity.

EXSU Series Crossed Roller Bearings

EXSU Series Crossed Roller Bearings

EFANT EXSU series crossed roller bearings are equivalent to the INA XSU series. Their cylindrical rollers are arranged crosswise at 90°, allowing them to simultaneously withstand radial loads, axial loads in both directions, and tilting moments. They offer high rigidity, high rotational accuracy, and a compact cross-section. The series is suitable for precision rotation applications such as industrial robot joints, machine tool rotary tables, indexing tables, radar, and medical equipment. The catalog lists 13 sizes, from EXSU13025 to EXSU102456, with the corresponding INA XSU model for each to facilitate selection and replacement. During installation, ensure the mating surfaces are accurate and clean, and apply lubrication and preload appropriate to the operating conditions.

EKLD Series Crossed Roller Bearings

EKLD Series Crossed Roller Bearings

EKLD series crossed roller bearings are EFANT bearings designed specifically for rotary tables. The catalog provides a model cross-reference showing the corresponding INA ZKLDF series specification for each model. Featuring a crossed-roller/multi-row rolling element design, these bearings can simultaneously support axial loads, radial loads, and tilting moments. They are suitable for applications requiring high rigidity and rotational accuracy, including CNC rotary tables, indexing tables, rotary tables in vertical and horizontal machining centers, and rotary joints in radar and medical equipment. The number in each model designation indicates the bearing bore diameter. The range covers bore diameters from 100 mm to 650 mm in 11 sizes: EKLD100, EKLD120, EKLD150, EKLD180, EKLD200, EKLD260, EKLD325, EKLD395, EKLD460, EKLD580, and EKLD650. Select a model according to the rotary table bore diameter, load capacity, and speed requirements. During installation, ensure the mounting surfaces meet flatness and fit accuracy requirements. For dimensions, load ratings, and limiting speeds, refer to the dimension table for the corresponding INA ZKLDF size.

LBCR Series Crossed Roller Bearing Roller Assemblies

LBCR Series Crossed Roller Bearing Roller Assemblies

The LBCR series consists of roller assemblies for crossed roller bearings (RV and RVF types). Cylindrical rollers and a cage are supplied as a set and installed between the inner and outer ring raceways to retain the rolling elements. The series is divided into D2, D3 and D4 sizes by roller diameter D, with corresponding structural dimensions t of 0.3, 0.4 and 0.7, and w of 5.6, 7.2 and 10, respectively. Center radius A ranges from 49.5~255 mm. The roller count is indicated by a suffix from 7Z to 26Z (7~26 rollers). P° and a° are angular parameters describing the circumferential arrangement of the rollers. They vary with center radius and roller count, ranging from approximately 1.3°~5.7°. The catalog also provides the basic load rating per roller for load calculations. Select the assembly according to the mating bearing's center radius A, required roller count and applicable model (RV or RVF). The same nominal model may have multiple sets of angular parameters; final fit depends on the mating bearing's raceway dimensions.

LBCR Series Rollers

LBCR Series Rollers

LBCR series rollers are cylindrical rollers designed specifically for RV and RVF series cycloidal pinwheel reducers. They are available in three diameters—2mm, 3mm and 4mm—with center radii ranging from 49.5mm to 255mm and roller counts of 7, 8, 9, 10, 11, 12, 13, 14, 16, 19 or 26. Each model specifies the P° and a° angle parameters and the compatible reducer type (RV or RVF). As essential rolling elements in a reducer, the rollers' precision and material directly affect transmission efficiency and service life. Made from high-quality bearing steel and precision-machined and heat-treated, these rollers offer high hardness, excellent wear resistance and a long service life. They are suitable for manufacturing and repairing RV/RVF reducers used in industrial robots, machine tools, packaging machinery and other applications.

TCP.POM Rubber-Coated Bearings

TCP.POM Rubber-Coated Bearings

Rubber-coated bearing series with a bearing-steel core that has undergone surface treatment, overmolded with polyurethane (PU, also known as urethane) or rubber. Available in hardness ratings from A30 to A95 and a range of popular colors. Suitable for light-duty applications such as conveying, these bearings offer wear resistance, shock absorption, and quiet operation. Select and order by combining the Type, D, L, and d parameters.

NN30 Series Double-Row Cylindrical Roller Bearings

NN30 Series Double-Row Cylindrical Roller Bearings

The NN30 series comprises double-row cylindrical roller bearings designed for machine tools. With high rigidity and high-speed performance, they are suitable for supporting precision machine-tool spindles. Bearing bore diameters range from 25 to 170 mm, outside diameters from 47 to 260 mm, and widths from 16 to 67 mm. Both cylindrical bore (NN30) and tapered bore (NN30K, 1:30 taper) types are available. Bearings with the W33 suffix have an oil groove and lubrication holes in the outer ring for easier lubrication. They offer dynamic load ratings of up to 157 kN, static load ratings of up to 265 kN, and limiting speeds of up to 19,000 rpm. Reference weights range from 0.12 to 12.8 kg. These bearings comply with national standards and are widely used in CNC machine tools, machining centers, and other equipment.

NNU49 Series Cylindrical Roller Bearings

NNU49 Series Cylindrical Roller Bearings

Double-row cylindrical roller bearings designed for machine tools, offering high radial load capacity, high rigidity, and high-speed performance. Suitable for machine tool spindles, precision machinery, and other applications. The series includes two types, NN3000 and NNU4900, with bore diameters of 25–190 mm, outside diameters of 47–280 mm, and widths of 16–74 mm. The suffix (K) indicates a tapered bore (1:12), allowing easier installation and clearance adjustment. Made from high-quality bearing steel and available in P0/P6 precision grades to meet different accuracy requirements. Basic dynamic load ratings: 26–565 kN; basic static load ratings: 30–1060 kN; limiting speeds: 3,000–19,000 rpm.