Timing Belt — Page 3

P14M Polyurethane Timing Belt
P14M polyurethane timing belt with a P14M tooth profile, made from thermoplastic polyurethane with a belt body hardness of 92 Shore A. The tensile cords are available in galvanized steel wire or aramid cord. Standard widths are 40, 55, 85, 100, 115, and 150 mm. The belt is 10 ± 0.4 mm thick, with a length tolerance of ±0.8 mm/m and a standard roll length of 100 m. Custom colors (such as white or black) and tooth-side or belt-back coverings (nylon canvas or antistatic canvas) are available. Open-ended belts can be cut to length; spliceable belts can be welded into endless belts for conveying. After splicing, the maximum permissible load is 50% of the belt body’s load capacity. Tooth shear strength varies with speed, and the minimum number of teeth in mesh is 6. Bend requirements: for straight drives, the minimum pulley tooth count is 32; for reverse bends, the minimum pulley diameter is 250 mm. Maximum permissible load depends on belt width and tensile-cord material. Galvanized steel wire can support up to 228,000 N at a width of 150 mm; aramid cord has an elongation of 0.8%.

P3M Timing Belt
The P3M timing belt features a curvilinear tooth profile and a 3 mm pitch, making it suitable for precision drive systems. This series is available with pitch lengths ranging from 174 mm to 480 mm, corresponding to 58 to 162 teeth. Belt widths can be selected as needed; 9 mm is one example. The belts use metric sizing, have a P3M tooth profile, and are available in a range of standard lengths. They are widely used in automation equipment, machine tools, packaging machinery, and other applications.

P3M Polyurethane Timing Belt
This series of P3M-tooth polyurethane timing belts is made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The core cords are available in galvanized steel or aramid. The tooth surface and belt back can be left uncovered or covered with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 15, 20, 25, 30, and 50 mm. Thickness is 2.2 ± 0.2 mm, tooth profile tolerance is ±0.3 mm, and length tolerance is ±0.5 mm/m. Standard roll length is 100 m; custom lengths are also available. Belts are available in open-ended or spliced versions; standard products are shown in bold. They are widely used for linear transmission in automation equipment.

P5M timing belt
The P5M timing belt is a toothed synchronous belt with a 5 mm pitch, designed for precision transmission. The model number consists of the pitch length, tooth profile designation, and width, for example, 500-P5M-15. A variety of standard pitch lengths are available, including 225, 245, 420, 500, 510, 525, 535, 540, 1240, 1595, 2000, 2160, 2250, 2590, 2680, 2725, 2790, 2890, 2990, 3060, 3360, 3500, and 3680 mm. Choose from standard widths to suit your needs. This series offers high transmission accuracy, low noise, and wear resistance.

P5M Polyurethane Timing Belt
P5M polyurethane timing belt, available in open-ended or joined type. Made from thermoplastic polyurethane with a hardness of 92 Shore A. Choose from galvanized steel wire or aramid cord tensile members. The tooth surface and belt back are available uncovered, with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 15, 20, 25, 30, 50, and 100 mm, with load capacities varying by width (galvanized steel wire: 670–6700 N; aramid cord: 820–8200 N). Standard roll length is 100 m, with custom lengths available. Length tolerance: ±0.5 mm/m; thickness: 2.2 ± 0.2 mm. Suitable for high-precision synchronous drive applications.

P8M Timing Belt
The P8M timing belt is a metric-profile synchronous belt with an 8 mm pitch. Pitch lengths range from 480 mm to 1,056 mm, with 12 standard sizes: 480, 600, 640, 800, 840, 896, 920, 960, 1,000, 1,032, 1,040, and 1,056 mm. Five standard widths are available: 15, 20, 25, 30, and 40 mm. It is suitable for industrial automation equipment requiring precise synchronized transmission and low noise, such as CNC machine tools, printing machinery, and packaging equipment. Made from high-strength polyurethane or rubber, the belt offers wear resistance, resistance to stretching, and a long service life.

P8M Polyurethane Timing Belt
The P8M polyurethane timing belt is made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. It is available with galvanized steel or aramid cord tensile members. The tooth face and belt back can be supplied without fabric, or with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 12, 15, 20, 25, 30, 50, 85, and 100 mm, with maximum permissible loads ranging from 1,425 N to 14,250 N for galvanized steel cords. Aramid cords have slightly lower load capacity but greater elongation. Tooth shear strength varies with speed; the minimum number of teeth in mesh is 6. Minimum pulley tooth counts are specified for straight drives, reverse bends, and inside bends. Available in open-ended or spliced versions (joined tooth-to-tooth by welding to form an endless belt). The maximum tensile strength of a spliced belt is 50% of the belt body's strength, and the minimum splice length is 800 mm. Suitable for conveying and power transmission applications.

RPP14M Timing Belt
The RPP14M timing belt is part of the Jaguar (Shenma Transmission) curvilinear-tooth timing belt series. RPP14M in the model designation indicates a curvilinear-tooth timing belt with a 14mm pitch. The catalog provides a tooth profile diagram and model designation system for the RPP14M timing belt. The complete model number consists of the pitch length, model and belt width code. For example, 966-RPP14M-50 denotes an RPP14M timing belt with a pitch length of 966mm and a belt width of 50mm. This series is suitable for applications requiring synchronous power transmission, such as automated equipment and drive modules. Key selection parameters include pitch, pitch length, tooth count and belt width. The T2.5 table data included in the original text belongs to a different tooth profile series and has not been included in this series' SKUs.

RPP3M Timing Belt
The RPP3M timing belt has a curvilinear tooth profile (RPP), a pitch of 3.00mm and a standard belt width designation of 10.00mm. It is suitable for low- to medium-power drives requiring low noise, smooth operation and high positioning accuracy. The catalog lists standard sizes with pitch lengths of 165~276mm and 55~110 teeth. Models are designated “pitch length-RPP3M,” such as 165-RPP3M and 240-RPP3M. Select a model by pitch length and tooth count, and confirm the order using the belt width designation. These belts are commonly used in drive systems for office equipment, automation devices and precision instruments.

RPP5M Series Curvilinear Tooth Timing Belts
The RPP5M series curvilinear tooth timing belts are part of Shenma Transmission's (Jaguar Timing Belt) RPP timing belt range. They feature an RPP curvilinear tooth profile and a nominal pitch of 5.00mm. They are suitable for medium-torque drives requiring low noise and high positioning accuracy, such as packaging machinery, printing equipment, CNC machine feed axes, automated production line conveyors and seventh-axis robot tracks. The product designation works as follows: in 800 RPP5M_10, 800 indicates a belt pitch length of 800mm, RPP5M is the model (pitch 5.00mm), and the number after the underscore is the belt width code, whose value is the width in millimeters (_10 means a belt width of 10.00mm). For the 800mm pitch length, the catalog lists the complete range of widths from 10, 20, 30 … 650mm, in 10mm increments. Special pitch lengths, tooth counts and nonstandard widths can be customized. When selecting a belt, calculate the tooth count and width based on transmitted power, speed and wrap angle, and ensure that the pulley tooth profile matches the RPP profile.

S14M polyurethane timing belt
The S14M polyurethane timing belt is available in open-ended or joined versions. Made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A, it can be reinforced with galvanized steel cords or aramid cords. It features an S14M tooth profile and is available in standard widths of 25, 40, 55, 85, 100, and 115 mm. The belt is 10.2 ± 0.45 mm thick, with a length tolerance of ±0.8 mm/m. The tooth surface and belt back can be supplied without fabric, or with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard roll length is 100 m; custom lengths and colors are also available. Designed for high-precision synchronous transmission, it offers wear, oil, and fatigue resistance and is widely used in automation equipment, packaging machinery, textile machinery, and other applications.

S14M Series Curvilinear Tooth
The S14M series is a curvilinear-tooth synchronous belt with a 14 mm pitch, designed for high-torque drive applications. It is available in a range of standard lengths, with 69 to 179 teeth and lengths from 966 mm to 2,506 mm. These belts offer high precision, low noise, and maintenance-free operation without lubrication. They are widely used in industrial automation, machine tools, packaging machinery, and other applications.

S14M Timing Belt
The S14M timing belt is part of the Jaguar (Shenma Transmission) curvilinear-tooth timing belt series. It has an S14M curvilinear tooth profile and a 14mm pitch, making it suitable for heavy-duty, high-torque, low-noise industrial drives in machine tools, packaging machinery, textile machinery and automation equipment. Models follow the format “pitch length-model-belt width code.” Available pitch lengths include 965~1690mm, with approximately 59~145 teeth. Belt width is indicated by the width code (for example, width code 10 corresponds to a belt width of 10.00mm). The belt typically incorporates high-strength tensile cords to limit elongation and offers an accurate transmission ratio, lubrication-free operation, wear resistance and smooth running. When selecting a belt, match its pitch length and tooth count to a pulley with the corresponding number of teeth, and ensure the belt width code matches the pulley width.

S2M Series Open-Ended Polyurethane Timing Belt
The S2M series polyurethane timing belt is open-ended and features an S2M tooth profile (2 mm pitch, semicircular teeth). The belt body is made of thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. Standard widths are 6, 9, 12, 15, 20, and 50 mm. The belt is 1.8 ± 0.2 mm thick, with a length tolerance of ±0.5 mm/m and a standard roll length of 100 m. Custom colors are available (including white and black), as are smooth-backed and toothed versions. Suitable for power transmission and conveying applications.

S3M/S5M/S8M Series Polyurethane Open-Ended Timing Belts
This series of polyurethane open-ended belts (also known as spliceable belts) is suitable for drive and conveying applications requiring unlimited lengths or on-site splicing. Made from polyurethane, these belts offer resistance to wear, oil, and aging. The range includes three common pitches: S3M, S5M, and S8M, corresponding to 3 mm, 5 mm, and 8 mm. Thickness tolerance is ±0.2 mm, and length tolerance is ±0.5 mm/m. Available in white or black, the belts can be reinforced with steel, nylon, or Kevlar cords for greater tensile strength. The maximum width is 100 mm for S3M and S5M, and 150 mm for S8M. The standard roll length is 100 m. Optional finishes include fabric on the tooth side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), and a coating (Covering) to suit different friction and wear-resistance requirements.

S3M Timing Belt
The S3M timing belt is a curvilinear-tooth synchronous belt with a 3 mm pitch, designed for precision drive and positioning systems. This series is available in a wide range of lengths, with pitch lengths from 87 mm to 4,500 mm and corresponding tooth counts from 29 to 1,500. Made from high-strength neoprene or polyurethane and reinforced with steel or aramid cords, it delivers accurate power transmission, low noise, and excellent wear resistance. Common applications include automation equipment, printers, textile machinery, and food packaging.

S3M Series Polyurethane Timing Belt — Open-Ended / Spliced
The S3M series polyurethane timing belt features an S3M tooth profile and is made from thermoplastic polyurethane with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. Both open-ended and spliced versions are available. Standard widths are 10, 15, 20, 25, 30, and 50 mm. Thickness is 2.2±0.2 mm, with a tolerance of ±0.3 mm; length tolerance is ±0.5 mm/m. Standard roll length is 100 m, or a specified length can be supplied. Tooth-side coverings are available in uncoated, green nylon fabric, black nylon fabric, or antistatic black fabric; the belt back can also be covered. Suitable for power transmission and conveying equipment, spliced belts have a maximum tensile strength of 50% of the belt body and a minimum splice length of 600 mm. For bending requirements, the minimum pulley size is 20 teeth, and the minimum diameter for an inside curve is 30 mm. Standard weight is calculated using a galvanized steel cord construction.

S3M Timing Belt
The S3M timing belt is a curvilinear-tooth timing belt (HTD/STPD type) with an S3M tooth profile and a pitch of 3.00mm. A common width code is 15, indicating a belt width of 15.00mm. The catalog uses a “pitch length-model” designation: for example, 396-S3M denotes an S3M timing belt with a pitch length of 396mm, with the belt width specified separately by a width code. These belts are primarily used in low-power precision drives, including office equipment, printers, small automation modules, 3D printers, packaging machinery, and textile machinery. They offer smooth, quiet operation, require no lubrication, and provide an accurate speed ratio and high positioning accuracy. The number of teeth is calculated from the pitch length and pitch. Common pitch lengths range from approximately 100~2500mm. Belt bodies are typically made of chloroprene rubber (CR) or polyurethane (PU), with fiberglass or aramid tensile cords. Select a belt based on the required pitch length, width, and tooth count. This page also includes a specification table for the S4.5M series (pitch 4.50mm), which is separate from the S3M series.

S4.5M Timing Belt
The S4.5M timing belt is a toothed drive belt with a 4.5 mm pitch, designed for precision drive applications. This series is available in a range of tooth counts and pitch lengths, from 40 to 88 teeth and 180 mm to 396 mm. Its standard tooth profile meshes with compatible pulleys to provide precise, quiet, lubrication-free power transmission. It is widely used in industrial automation, packaging machinery, printing equipment, and other applications.

S4.5M Series Timing Belts
S4.5M series timing belts have a 4.50 mm pitch and a curvilinear tooth profile, and are suited to standard drive applications using a 15.00 mm belt width (width code). Model designations typically combine the pitch length and the S4.5M tooth profile, for example 162-S4.5M and 396-S4.5M. The table lists the corresponding tooth counts for pitch lengths from 100 mm to 2505 mm; tooth counts are calculated from the pitch length using a 4.5 mm pitch. These belts provide synchronous power transmission between a motor and a driven pulley, with an accurate transmission ratio, low noise and wear resistance. They are suitable for low- to medium-power drives in automation equipment, packaging machinery and office equipment. When selecting a belt, confirm the pitch length, tooth count, belt width and pulley tooth profile.

S5M-K6 Polyurethane Timing Belt
The S5M-K6 polyurethane timing belt is an open-ended, spliceable belt made from a thermoplastic polyurethane (TPU) body with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth side and belt back can be covered with nylon fabric or antistatic fabric. Standard widths are 20/25 mm, with an S5M-K6 tooth profile and a minimum clamping length of 6 teeth. It is suitable for linear drives, reverse-bend applications, and internally tensioned curved paths. The required pulley tooth count varies depending on the tensile cord material. Spliceable belts can be joined by welding the teeth to form an endless loop. Their maximum tensile strength is approximately 50% of that of the belt body, and the minimum splice length is 600 mm. They are widely used in conveying and power-transmission applications.

S5M timing belt
The S5M timing belt is a curvilinear-tooth belt with a 5 mm pitch. Its curved tooth profile enables high-precision, low-noise synchronous transmission. It is suitable for applications requiring precise drive performance, including industrial automation equipment, machine tools, textile machinery, and packaging machinery. S5M timing belts offer high load capacity, smooth operation, and good wear resistance, and are commonly used with S5M timing pulleys. The series is available in a range of lengths, with pitch lengths from 445 mm to 15,000 mm and various tooth counts to suit different center distances and transmission ratios.

S5M Polyurethane Timing Belt
The S5M polyurethane timing belt is made of thermoplastic polyurethane with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth side and belt back are available uncovered, with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 15, 20, 25, 30, 50, and 100 mm. The belt thickness is 3.4 ± 0.25 mm, with a length tolerance of ±0.8 mm/m. The standard length is 100 m, and custom lengths are available on request. Both open-ended and spliced versions are offered for power transmission and conveying applications.

S5MA Polyurethane Timing Belt
The S5MA polyurethane timing belt is available in open-ended or spliced versions. The belt body is made of thermoplastic polyurethane, with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. Nylon fabric (green, black, or antistatic black) can be added to the tooth side and belt back, or omitted. The tooth profile is S5MA, and the standard width is 25 mm. Maximum allowable load: 1,675 N for galvanized steel cords (0.4% elongation) and 1,718 N for aramid cords (0.8% elongation). Spliced belts are joined at the teeth by welding to form an endless loop and are used in conveying equipment. The minimum splice length is 600 mm, and the maximum tensile strength at the splice is 50% of the belt body strength.

S8M Timing Belt
The S8M timing belt is a curvilinear-tooth synchronous belt with an 8 mm pitch. Its fiberglass tensile cords provide high strength, excellent flexibility, dynamic bending performance, and resistance to tensile elongation. Nylon facing fabric on the teeth reduces operating noise and extends belt life. The body is made from a specially compounded rubber that offers some resistance to oil and dirt, aging, and cracking. It delivers an accurate transmission ratio and smooth, high-speed, low-noise operation, with a degree of antistatic capability. It is widely used in office equipment, packaging machinery, automation equipment, robotics, and intelligent logistics. Available in pitch lengths from 352 mm to 3,652 mm, with 44 to 255 teeth and a range of standard lengths.

S8M Polyurethane Timing Belt
The S8M polyurethane timing belt is available in open-ended or spliced versions and is made from thermoplastic polyurethane with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth side and backing can be covered with green or black nylon fabric, black antistatic fabric, or left uncovered. Standard widths are 10/12/15/20/25/30/50/85/100 mm. The tooth profile tolerance is ±0.5 mm, thickness is 3.4 ±0.25 mm, and length tolerance is ±0.8 mm/m. Maximum allowable load and tooth shear strength data are available for each width, making the belt suitable for a variety of power transmission and conveying applications. Spliced belts can be welded tooth to tooth to form an endless loop. Their maximum tensile strength is 50% of the load capacity at the splice, and the minimum splice length is 800 mm.

S8M Series Curvilinear-Tooth Timing Belts
The S8M series timing belt is an endless curvilinear-tooth belt with an 8.00mm pitch and an HTD 8M tooth profile. It provides synchronous power transmission in automation equipment, machine tools, packaging machinery and printing machinery. Its features include smooth, quiet operation, no slippage, high positioning accuracy, and resistance to oil and wear. The designation format is “pitch length-model-width code”. For example, 1120-S8M-30 denotes a pitch length of 1120mm, an S8M tooth profile (8.00mm pitch), and width code 30 (30.00mm belt width). The catalog offers a range of standard pitch lengths from 376mm to 5160mm, corresponding to approximately 47 to 645 teeth. Belt width is specified by the width code; the commonly used code 30 denotes 30.00mm, and other widths are available on request. When selecting a belt, confirm the pitch length, tooth profile and pitch, belt width, and required tooth count. Use a matching S8M pulley for installation. Note: The model segment in the original table was written as “58M” due to OCR recognition; it is actually S8M and has been standardized throughout.

T10 Timing Belt
The T10 timing belt is a trapezoidal-tooth belt with a 10 mm pitch, designed for general industrial power transmission. It offers smooth operation, low noise, and requires no lubrication. The standard length range runs from 340 mm to 2,680 mm, allowing you to choose the right size for your needs. The belt uses fiberglass cords for high strength and low elongation; a nylon fabric facing on the teeth helps reduce operating noise; and the body is made from a specially compounded rubber that resists oil, dirt, and aging. It is widely used in power transmission systems in the textile, machine-tool, tobacco, packaging, and food-processing industries.

T10 Series Polyurethane Timing Belts
T10 series polyurethane timing belts feature a T10 tooth profile with a 10 mm pitch. The belt body is made of thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. Cords are available in galvanized steel or aramid. Green nylon fabric, black nylon fabric, or antistatic black fabric can be added to the tooth side and belt back. Standard widths include 12, 16, 20, 25, 30, 50, 100, and 150 mm. These belts offer high wear resistance, high tensile strength, and low elongation, making them suitable for linear drives, reverse-curved and internally tensioned curved applications, and other power-transmission and conveying uses. The minimum number of clamped teeth is 6. The minimum splice length for joined belts is 600 mm, and the maximum permissible load at the splice is 50% of the belt's rated load.

T10 K13 Series Open-Ended Polyurethane Timing Belt
The T10 K13 series open-ended polyurethane timing belt, also known as a splicing belt, has a 10 mm pitch and a K13 tooth profile. Its toothed surface can be supplied open-ended or spliced into a loop. Made from polyurethane (PU), the belt is available in white or black, with steel or Kevlar tensile cords, offering high strength and wear resistance. Length tolerance is ±0.5 mm/m, thickness tolerance is ±0.4 mm, maximum width is 150 mm, and standard length is 100 m. Optional features include fabric covering on the tooth side (NFT), fabric covering on the back (NFB), fabric covering on both sides, added rubber, or an integrated guide strip. It is suitable for linear drives, material conveying, and other applications requiring on-site fastening or quick splicing.

T2.5 Open-Ended Polyurethane Timing Belt
This series features open-ended polyurethane timing belts with a T2.5 tooth profile, suitable for linear drives and power transmission. The belt body is made of thermoplastic polyurethane with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid, with white and black as standard colors; other colors are available on request. Standard widths are 10/16/20/50 mm, thickness is 1.8±0.2 mm, and the length tolerance is ±0.5 mm/m. Belts are available in standard 100 m rolls or cut to specified lengths. The product offers high abrasion resistance, oil resistance, and tensile strength, making it suitable for drive systems in automation equipment, packaging machinery, printing machinery, and more. The tooth profile dimensions table lists the weight, maximum allowable load (for galvanized steel and aramid cords), and elongation for each width. Tooth shear strength varies with speed. Bend-radius requirements specify the minimum pulley tooth count and diameter.

T2.5 Trapezoidal-Tooth Timing Belt
The T2.5 series trapezoidal-tooth timing belt has a 2.5 mm pitch and is designed for precision, light-load power transmission. Standard lengths range from 120 mm to 1,475 mm, corresponding to 48 to 590 teeth, with length accuracy of up to 0.01 mm. These belts offer reliable synchronization and low-noise operation, and are widely used in office equipment, small automation systems, and precision instruments. They are typically made of neoprene or polyurethane and reinforced with a fiberglass tensile cord. A range of standard lengths is available for direct selection, with no customization required.

T20 Polyurethane Timing Belt, Open-Ended/Spliced
The T20 polyurethane timing belt is available in open-ended or spliced configurations and is made from thermoplastic polyurethane with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth side and belt back can be customized with no covering, green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 25/32/50/75/100/150 mm; thickness is 8 ± 0.45 mm, and the length tolerance is ±0.8 mm/m. Standard roll length is 100 m, or the belt can be cut to a specified length. Suitable for a range of motion types, including linear transmission and curved drives, it offers high abrasion, oil, and fatigue resistance. It is widely used in automation equipment, packaging machinery, textile machinery, and other applications.

T5 Series Polyurethane Timing Belts
T5 series polyurethane timing belts are made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The core cords are available in galvanized steel or aramid. The tooth side can be covered with green nylon fabric, black nylon fabric, or antistatic black fabric; the same fabric options are also available for the belt back. Standard widths are 6, 10, 15, 20, 25, 32, 50, and 100 mm. Open-ended belts are suitable for linear drives. Spliced belts are joined tooth-to-tooth by welding to form endless belts for conveying equipment. The tensile strength at the splice is 50% of the belt body strength, and the minimum splice length is 600 mm. The belts have a standard T5 tooth pitch. Required bend radii vary depending on the type of motion and core cord material. These products meet standard industrial application requirements; maximum permissible load and shear strength vary with belt width and speed.

T5 timing belt
The JAGUAR T5 timing belt has trapezoidal teeth and a 5mm pitch. Designed for light- to medium-load synchronous drives, it is commonly paired with T5 timing pulleys and widely used in packaging machinery, printing equipment, office automation equipment, textile machinery, and various small drive mechanisms. The catalog uses the pitch length (mm) as the model suffix. Pitch lengths range from 150~1620mm, corresponding to 30~324 teeth, with the relationship: number of teeth = pitch length ÷ 5. The designation consists of the model (5mm pitch) + timing belt pitch length code (mm). Belt width is indicated separately by a width code; the code shown in the catalog is 10 (meaning a belt width of 10mm). These are standard products with short lead times and can be selected directly by pitch length, tooth count, and belt width. Other timing belt tooth profiles, including AT5 and AT10, are listed on the same page but are not part of this series.

T5/T10/T20 Series Polyurethane Open-Ended/Joined Belts
This series of polyurethane open-ended/joined belts is designed primarily for conveying and synchronous drive applications. The belt ends can be joined to form a continuous loop. The range includes three tooth pitches: T5 (5 mm), T10 (10 mm), and T20 (20 mm). Available in white or black, with steel or Kevlar cords for a balance of strength and flexibility. Maximum standard widths are 450 mm for T5/T10 and 150 mm for T20; the standard roll length is 100 m. Length tolerance is ±0.5 mm/m. Thickness tolerance is ±0.2 mm for T5/T10 and ±0.4 mm for T20. Optional features include fabric on the tooth side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), a cover coating, double-sided teeth, and an integrated guide strip, to suit different friction, wear-resistance, and guiding requirements.

T80 Series Timing Belts
The T80 timing belt outside adjustment table lists the corresponding outside adjustment values for different belt lengths, for use when installing and adjusting timing belt pulleys. This table is part of the design section and applies to the T80 belt profile. Adjustment values range from 3 mm to 30 mm, and belt lengths range from 254 mm to 4,572 mm.

TK10-K13/ATK10-K13 Polyurethane Timing Belt, Open-Ended/Joined Type
This series of polyurethane timing belts is available in two tooth profiles, TK10-K13 and ATK10-K13, for open-ended or joined-belt drives. The belt body is made of thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The tensile cords are made of galvanized steel wire or aramid cord. The tooth surface and belt back can be left uncovered or covered with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths for TK10-K13 are 30, 50, 75, 100, and 120 mm; standard widths for ATK10-K13 are 30, 50, 75, and 100 mm. The belt thickness is 8.5±0.3 mm, and the length tolerance is ±0.8 mm/m. The standard length is 100 m, or a custom length can be supplied. These belts offer high wear resistance, high load capacity, and low elongation, and are widely used for synchronous power transmission in automation equipment, packaging machinery, textile machinery, and other applications.