Transmission Accessories — Page 12

A Series Heavy-Duty Roller Chain
A series heavy-duty roller chains use the ISO/ANSI chain numbering system and are available in single-strand (-1) and double-strand (-2) configurations. The H in the chain number denotes the heavy-duty type. Single-strand sizes range from 35H-1 to 240H-1, and double-strand sizes from 60H-2 to 240H-2. Pitch ranges from 9.525 to 76.2 mm. Full specifications are available for roller diameter, inner width, pin diameter and length, plate thickness, transverse pitch, tensile strength, and weight per meter. These chains are suitable for heavy-duty power transmission, conveyor lines, construction machinery, and industrial equipment. They offer high load capacity, wear resistance, and smooth operation, and can be selected by chain number.

A Series Straight-Sidebar Roller Chain
The A Series straight-sidebar roller chain is a general-purpose power transmission chain conforming to ISO/ANSI standards. It features straight sidebars and is available in a full range of single-strand and double-strand (Duplex) sizes. Chain sizes range from C08A-1 (equivalent to ANSI 35-1) to heavy-duty sizes such as 240H-2, with pitches of 9.525~76.2mm, roller diameters of 5.08~47.63mm, and tensile strengths of 7.9~1000kN. The H Series is designed for heavy-duty service, with thicker sidebars and larger pins for shock loads and heavy-duty drives. Double-strand chains provide greater load capacity through increased strand spacing. Made from high-quality carbon or alloy steel, the chains are heat-treated, pre-stretched, and treated for corrosion resistance. They offer wear resistance, fatigue resistance, and low elongation, and are widely used for power transmission in industrial machinery, agricultural machinery, conveyor lines, and mining equipment.

Short-Pitch Conveyor Chain with Attachments
This series comprises short-pitch conveyor chains with attachments. The catalog cross-references ISO/DIN chain numbers with Donghua chain numbers. Common chain numbers include 04C, 06C, 08A, 10A through 94A, and B-series chains from 06B—24B. Pitch P ranges from 6.350—282.000 mm. Attachment dimensions include G, F, W, C, T, h4 and d4, for conveyor configurations using bent or straight attachments. Page 12 also provides specifications for straight side plates. Dimensions for the same chain number may vary by attachment type; check the attachment tables when selecting a chain.

ISO/DIN Standard Roller Chains
The ISO/DIN standard roller chain range covers common chain sizes ISO/DIN 25~200 and 06B~24B, corresponding to Donghua chain numbers 04C, 06C, 08A, 10A, 12A, 16A, 20A, 24A, 28A, 32A, 40A and 06B~24B. The chains feature straight side plates and are suitable for general mechanical power transmission and conveying. The catalog provides dimensions including pitch P, G, L, C, F, plate thickness T and da. Pitches range from 6.350~63.500 mm, and chains can be selected by chain number.

Double-Pitch Conveyor Attachment Chain
Double-pitch conveyor attachment chains use both DIN/ISO and ANSI chain designations and are suitable for low- to medium-speed drives and material handling on conveyor lines, packaging machinery, and logistics sorting systems. The range includes 208A/210A/212A/216A/220A/224A and 208B/210B/212B/216B/220B/224B chain sizes, corresponding to ANSI 2040, 2050, 2060, 2080, 2100, and 2120. K1, SK1, SK2, WA1, and other attachments are available. Specifications include pitch P, roller outside diameter G, attachment dimensions F/F1/F2, link plate width W, pin diameters d4/d5, attachment height h4, and C/L, allowing selection based on the items conveyed and mounting method.

Leaf Chains
Leaf chains, also known as forklift chains, consist of interleaved link plates connected by pins. The plates are arranged in lacing patterns such as 2×2, 3×3, and 4×4. These chains offer high load capacity, good fatigue resistance, low elongation, and smooth operation. They are widely used in forklift lifting mechanisms, counterweight systems, machine tool counterweights, lifting platforms, and other reciprocating lifting applications. The catalog lists specifications using both ISO and ANSI chain numbering systems. Key parameters include pitch, plate lacing, plate height, plate thickness, pin diameter, pin length, tensile strength, average tensile strength, and weight per meter. Select a chain based on the rated load, number of sprocket teeth, and available installation space. Refer to the parameter table on the relevant model page for specific values.

Donghua · Shield Double-Speed Chain
Donghua · Shield double-speed chains are primarily used in double-speed conveying sections of assembly and production lines. The difference between the diameters of the large and small rollers allows pallets to travel at approximately 2.5 times the chain speed. Chain numbers include 08BS, 08BSF8, 12BS, 16BS, 100SF1 and 212BS. Pitch ranges from 12.70~38.10 mm, roller diameter from 8.51~19.05 mm, speed roller diameter from 16~48 mm, inner link width from 7.75~25.50 mm, pin diameter from 4.45~9.53 mm, pin length from 27~85 mm (the middle number in the model designation indicates pin length), and plate height from 11.8~30.0 mm. Tensile strength ranges from 18.0~86.7 kN and average tensile strength from 19.8~104.0 kN. The model suffix identifies the roller material: P denotes plastic rollers and C denotes steel rollers, with configurations such as P16/C16 and P28/C28.

SCS High-Precision Sprockets
Shenma Transmission's SCS high-precision sprocket range includes FBS finished-bore sprockets and S series standard sprockets, compatible with 04C, 08A, 08B, 12A, 16A, 24A and other chain sizes. Finished-bore sprockets come with an H7 precision-finished bore, a standard keyway and threaded holes. Common bore diameters range from 10~150 mm, with 14~63 teeth. Made from high-quality 45 steel, they have induction-hardened and tempered teeth, with a choice of black oxide or galvanized finish. Custom SUS304 stainless steel versions are also available. The sprockets are used in conveying, packaging and automation drive systems. Standard products are in stock, individually packaged and available for fast shipping.

A Series High-Precision Sprockets
The A Series high-precision sprockets are a standard range for roller chain drives, available by chain size (25, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, through to 270 and others). The range covers everything from light-duty drives with a small pitch of 6.35mm to heavy-duty drives with a large pitch of over 200mm. The catalog provides comprehensive tooth profile and hub dimensions for each size: pitch P, roller diameter D, tooth root height h, chamfer height A, chamfer width C, chamfer radius R, row spacing t, single-row tooth thicknesses t1 and t2, double-row tooth thickness options, and tooth space widths B1~B4. This makes it easy to select a matching sprocket by chain specification, number of rows (single/double/multiple) and tooth count. Precisely machined tooth profiles ensure smooth engagement, low drive noise and minimal wear. These sprockets are suitable for conveyor lines, packaging machinery, agricultural machinery, food processing machinery and general industrial drives. To select a sprocket, first determine the pitch and roller diameter from the chain model, then choose the tooth count based on the transmission ratio and the number of rows and tooth thickness based on the load. Finally, select the hub and chamfer configuration to suit the shaft diameter and available installation space.

FBS Series Finished-Bore Sprockets
FBS series finished-bore sprockets are high-precision standard sprockets manufactured by Shenma Transmission. Supplied with machined bores, they are suitable for standard roller chain drives such as 06B and 35B. Their pitch, inner width, roller diameter and tooth width are matched to chain standards. Precision-finished teeth ensure smooth engagement, low transmission noise and long wear life. They are commonly used with gearmotors, conveyor lines, packaging machinery and agricultural machinery, and are available in a choice of tooth counts and finished bore sizes.

FBS Series Finished-Bore Sprockets
FBS series finished-bore sprockets are ANSI-standard sprockets manufactured by Shenma Transmission (SCS High-Precision Sprockets). They come with a finished bore, keyway, and tapped set-screw holes, ready for direct installation on a gearbox or drive shaft without additional boring or keyway cutting. They are compatible with standard roller chains including 08A(40), 16A(80), 20A(100), and 24A(120), with chain pitches of 12.7~38.1 mm and inner widths of 7.95~25.4 mm. Common tooth counts range from 10~30, and finished bore diameters from 25~80 mm. Keyway sizes are matched to the bore diameter (8×3.3 to 22×5.4), and tapped holes range from M8~M16. Outside diameter, pitch diameter, hub diameter, overall length, and weight are specified by tooth count. The sprockets are made of high-quality 45 steel, with teeth induction hardened and tempered for improved wear resistance. SUS304 stainless steel is available by custom order. They are packed in cartons and wooden crates. Standard sizes are available from stock, with delivery in 15 days for additional orders and 30 days for custom orders.

FBS Series Finished Bore Sprockets
FBS series finished bore sprockets are standard sprockets for mechanical power transmission. Their finished bores allow direct mounting on shafts, making them suitable for transmitting power in chain drive systems. The catalog lists chain number, tooth count, chain pitch P, chain inner width W, roller diameter Dr, and tooth width T as selection parameters. This page covers FBS50B and FBS60B. The FBS60B is listed as compatible with 12A chain, with a pitch of 19.05 mm, inner width of 12.7 mm, roller diameter of 11.91 mm, tooth width of 11.7 mm, and 9 teeth. Finished bore sprockets are commonly used in conveying, packaging, agricultural machinery, and general industrial drives. When selecting a sprocket, check the chain specification, tooth count, and bore size.

FBS Series Finished Bore Sprockets
FBS series finished bore sprockets are suitable for roller chain drive systems using 10A, 12A and similar chains. The finished bore allows direct installation. FBS50SD fits 10A chain (pitch 15.875 mm, inner width 9.53 mm, roller diameter 10.16 mm, tooth width 8.7 mm); FBS60SD fits 12A chain (pitch 19.05 mm, inner width 12.7 mm, roller diameter 11.91 mm, tooth width 11.7 mm). These sprockets feature standardized tooth profiles and are designed for high quality and industry standardization. They can be used in general machinery applications such as conveying and power transmission. Select the appropriate sprocket based on the chain number, number of teeth and finished bore size.

R-Type Double-Pitch Roller Chain Sprocket
R-type double-pitch roller chain sprockets are designed for use with double-pitch roller chains in low-speed, heavy-duty drives such as conveyor lines, packaging machinery, and agricultural machinery. The catalog specifies compatible sprocket dimensions by chain pitch P, chain inner width W, roller diameter Dr, and tooth width T, covering P=12.7, 15.875, 19.05, 25.4, and 31.75 mm. Corresponding chain inner widths W range from 7.95~19.05 mm, roller diameters Dr from 7.92~19.05 mm, and tooth widths T from 7.2~17.6 mm. Sprocket parameters also include outside diameter D0, inside diameter d, pitch P, and pitch deviation ΔP. Select the sprocket size according to chain pitch, roller diameter, number of teeth, and available installation space. These sprockets are suitable for standardized chain drive systems.

Double-Drive Sprocket
A double-drive sprocket is designed for use with double-row roller chains and is widely used in automated conveyor lines, power transmission systems, and similar applications. The catalog lists several chain pitch options: 12.7 mm, 15.875 mm, 19.05 mm, 25.4 mm, and 31.75 mm. Each pitch corresponds to specific parameters, including chain inner width W (7.95~19.05 mm), roller diameter Dr (7.92~19.05 mm), and tooth width T (7.2~17.6 mm), ensuring a precise match with the corresponding chain. Sprockets are typically made from carbon steel or stainless steel and may be heat-treated or surface-treated to improve wear resistance. Selection depends on chain pitch, tooth count, bore diameter, and mounting method. No specific model codes are provided on this page; orders must be customized or selected according to the required parameters.

Shenma Sprockets and Gears
Shenma sprockets and gears have been a core product line for Shenma Transmission for more than a decade, offering excellent value, wear resistance and long service life. A comprehensive range of standard semi-finished sprockets and gears is kept in stock, with consistently maintained dimensions that simplify equipment selection and installation and provide an alternative to expensive parts sold on online platforms. Finished sprockets were added to inventory in 2023, and standard single-strand finished sprockets were fully stocked by the end of that year, enabling quick purchases for customers who keep little or no inventory. Custom non-standard products are made to high quality standards and delivered on time, supporting the maintenance and outfitting of chain drives, gear drives and related machinery. This catalog page does not list specific tooth counts, pitches, bore diameters, materials or model codes.

8-fen (16A) Shenma finished-bore sprocket
The 8-fen (16A) Shenma finished-bore sprocket is suitable for roller chain drives with a 25.4mm pitch (8-fen/16A). It is available with 10~20 teeth, an outside diameter of 93~173mm, a pitch diameter of 82.20~162.37mm, a hub diameter of 50~85mm, an overall length of 35~40mm, and a unit weight of 1.02~3.6kg. Finished bores are available in small-hub and large-hub versions: small-hub bore diameters are 25/28/30/32/35/38/40/42mm, and large-hub bore diameters are 45/48/50/55/60mm. Select the appropriate bore to match the shaft diameter. The sprocket body is turned from 45# round steel, with induction-hardened teeth for improved wear resistance and a black oxide finish for rust protection. All specifications listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden cases, or pallets.

Shenma Double-Single Sprocket
The Shenma double-single sprocket is a sprocket and gear transmission component designed for applications requiring engagement with a double-row chain or a simulated double-row arrangement. The catalog lists selection parameters including model, number of teeth, outside diameter D, pitch diameter P, row spacing C, meshing diameter B, bore diameter d, number of sprocket faces, and total thickness B. The sprocket is made from 45# steel, with induction-hardened teeth for improved wear resistance. All models in the table are in stock and available for same-day dispatch, packaged in cartons, wooden cases, or on pallets. Specific models and dimensions are not listed on this page; consult the complete table or confirm with the supplier before selecting a product.

Shenma Standard 08B Double-Row 45# Steel Sprocket Series
The Shenma standard 08B double-row 45# steel sprocket series is designed for use with 08B (4-fen, 12.7mm pitch) double-row roller chain. Made from 45# steel, the sprockets have induction-hardened teeth for high surface hardness and wear resistance, making them suitable for medium- to low-speed, heavy-duty drives. The catalog lists the tooth outside diameter Do, boss diameter BD, overall thickness BL, total tooth thickness C, bore diameter d and weight for each tooth count from 10~43. Tooth outside diameters range from 46mm to 249mm, boss diameters from 31.5~107mm, overall thicknesses from 38~51mm, and bore diameters from 10~20mm, with allowances for bores above 20mm on some higher tooth-count sizes. Total tooth thickness is 21mm throughout, and weights range from 0.30~8.91kg. All standard products in the series are in stock and available for same-day shipping. Packaging options include cartons, wooden crates and pallets. They are widely used on conveyor lines and at shaft ends in packaging machinery, agricultural machinery and general power transmission equipment.

Shenma 10A Double-Row 45# Steel Standard Sprocket Series
The Shenma 10A (5/8-inch) double-row standard sprocket is made of 45# steel and designed for 10A double-row roller chain drives. Its teeth are induction-hardened for good wear resistance and load capacity. The catalog lists sizes from 10T~42T, with outside diameters of approximately 58~260 mm, hub diameters of 40.5~110 mm, overall thicknesses of 45~55 mm, total tooth thickness of 26.5 mm, bore diameters of 10~25 mm, and individual weights of approximately 0.45~11.4 kg. All listed models are in stock and available for same-day dispatch. Packaging options include cartons, wooden cases, or pallets. These sprockets are suitable for chain drives in conveying, packaging, agricultural, and general industrial machinery.

Standard Double-Single Sprocket in 45# Steel
Shenma Transmission's standard double-single sprockets are made from 45# steel, with high-frequency hardened teeth for good surface hardness and wear resistance. They are suitable for double-row roller chain drives. The catalog offers three row spacing series of 28mm, 34mm and 41mm, with 12~23 teeth; tooth outside diameter Do 55~174mm, hub diameter BD 34~134mm, overall thickness BL 35~55mm, bore diameter d 10~20mm, and unit weight 0.3~8.03kg. When selecting a sprocket, determine row spacing C from the chain specification, then select the number of teeth based on the required transmission ratio and center distance. The bore can be selected to match the shaft diameter or machined to size. All models listed in the table are in stock and available for same-day dispatch, packed in cartons, wooden cases or on pallets.

Shenma Standard 45# Steel Spur Gear (1M)
The Shenma standard 45# steel spur gear (1M) is a module 1 cylindrical spur gear made from 45# steel with a standard involute tooth profile. It transmits power in mechanical drives, speed reduction mechanisms, and automated equipment. The catalog lists specifications by tooth count, with common options ranging from 12 to 187 teeth and 12 to 100 teeth comprising the main standard range. All sizes have a face width (overall length BL) of 10mm. The bore diameter is 5mm for 12 to 13 teeth and 6mm for 14 teeth and above. The outside diameter increases from 14mm to approximately 100mm as the tooth count rises, and each gear weighs approximately 0.01kg. These gears can mesh with other gears of the same module (1M) or work with a 1M rack to convert rotary motion into linear motion. They are widely used in packaging, printing, textiles, small geared motors, and other applications. Select a specification using the 1M module and tooth count. The bore, keyway, and threaded fastening holes can be machined as needed.

Shenma Standard 45# Steel Spur Gear (2M)
The Shenma standard 45# steel spur gear (2M) is a cylindrical spur gear with a 2 mm module, manufactured from 45# steel. It is suitable for general mechanical drives, gear reducers, automation equipment, and transmission mechanisms. Machined to a standard tooth profile, it is available with a choice of tooth counts to suit the application. The outside diameter varies with the number of teeth, with common tooth counts covering small and medium sizes. Gear dimensions include overall length, face width, and bore size for compatibility with shafts, keys, and fastening arrangements. Quenching and tempering or surface heat treatment can give 45# steel good overall mechanical properties, meeting wear resistance and bending strength requirements under normal loads. The catalog table lists parameters including tooth count, outside diameter BD, overall length, bore Ld, and weight. Selection should take into account transmitted torque, speed, lubrication, and installation space.

Shenma Standard 45# Steel Spur Gear(3M)
The Shenma standard 45# steel spur gear(3M)is a module 3 straight-tooth spur gear made from 45# steel. It is suitable for fixed-ratio applications in general machinery, machine tool feeds, conveyor lines and automation equipment. The catalog lists sizes by tooth count, ranging from 10~116 teeth, with outside diameters of approximately 30~557.5mm, tooth widths/overall lengths of approximately 25~40mm, and bore options of 10~30mm. Reference weights are also provided. Outside diameter, bore and gear body thickness vary by size. Select according to tooth count, module, bore and available mounting space. The gear can be used with a rack or mating gear of the same module. Standard parts are available from stock or made to order.

Shenma 2042 Series Double-Pitch Sprockets
Shenma 2042 series double-pitch sprockets are compatible with 2042/208AL double-pitch chains. The chain has a 25.4mm pitch, 7.85mm inner width and 15.88mm roller diameter; the sprocket tooth width is 7mm. Made from forged A3 steel with induction-hardened teeth, the sprockets are available with 8~20 teeth. The outside diameter is 78.0~174.0mm, hub diameter 42~80mm, overall thickness 35mm, bore diameter 14~20mm and unit weight 0.35~2.08kg. All specifications listed in the table are in stock and available for same-day dispatch. Packaging options include cartons, wooden cases or pallets.

Shenma Standard 45# Steel Spur Gear (6M)
The Shenma standard 45# steel spur gear (6M) has a module of 6 and is machined from 45# medium-carbon steel. Its standard involute tooth profile is suited to spur gear drives requiring an accurate transmission ratio and steady loads. The catalog covers 33 sizes with 10~42 teeth: outside diameter BD is 72~264 mm, overall length (face width) BL is 45 mm throughout, and bore diameter d is 18 mm (10 teeth), 20 mm (11~21 teeth), or 25 mm (22 teeth and above). Unit weight ranges from 0.86~16.41 kg. A 1000×50×50 mm rack is also available for use with these gears in a rack-and-pinion drive. All sizes listed in the table are in stock and can be shipped the same day, packed in cartons, wooden crates, or on pallets.

45# steel double-step single-bearing idler sprocket
The Shenma 45# steel double-step single-bearing idler sprocket is machined from 45# round steel, with induction-hardened teeth. It is suitable for chain sizes including 25B/04C, 35B/06C, 40B/08A, 50B/10A, 60B/12A and 80B/16A. The sprocket has a double-step, single-bearing design. The table lists the tooth outside diameter, boss diameter, tooth thickness, overall thickness, bearing thickness, bearing outside diameter, bore and single circlip groove dimensions by tooth count. Compatible bearings include 606, 608, 609, 6000, 6001, 6201, 6202, 6203 and 6204. Models with common tooth counts are in stock and available for same-day dispatch. Packaging options include cartons, wooden cases and pallets.

Tongcheng Timing Pulleys
Tongcheng timing pulleys (Shenma Transmission) transmit motor rotation and work with toothed belts to provide high-precision, high-speed power transmission. The range includes standard, keyless and clamping-type timing pulleys, toothed grooved pulleys and idlers. Compatible timing belts include power transmission belts, belts with attachments, extended-length polyurethane belts, fabric-covered belts and open-ended belts. Pulley tooth counts range from 15 to 72, with tooth outside diameters of 13.56~68.00mm, pitch diameters of 14.32~68.76mm, flange outside diameters of 19~72mm, flange inside diameters of 12.5~58mm, overall thicknesses of 15/20mm, groove widths of 11/16mm, bore diameters of 5~20mm and set screw sizes of M4/M5. They are suitable for drive systems in automated equipment requiring high-precision positioning.

Timing Pulleys
Timing pulleys are power transmission components used to transfer rotational power from motors. Typically paired with toothed belts, they are widely used for high-precision positioning, high-speed drives, and conveying applications. As equipment demands greater precision and speed, these products are subject to strict quality control to meet high-precision positioning requirements. The range includes standard timing pulleys (surface-treated and bore-machined), keyless timing pulleys, clamping timing pulleys, toothed pulleys, idler pulleys, and matching components such as timing belts, timing belts with attachments, extended timing belts (polyurethane or fabric-covered, with a selectable number of teeth and a maximum length of 10m), and open-ended belts. Drive applications include mounting pulleys on motors and shafts to transmit rotational force. Conveying applications include repetitive motion requiring high positioning accuracy without rotating the conveyed object.

Keyless Timing Pulleys
A keyless timing pulley is a transmission component made by fitting a standard timing pulley with a keyless locking bushing. Bolts compress the tapered sleeve, reducing the bore diameter and gripping the shaft by friction without requiring a keyway. During installation, the pulley can be freely positioned at any angle and axial location on the shaft before being locked in place. This eliminates keyway machining and key clearances, preventing backlash and loosening during forward and reverse rotation. It is suitable for applications requiring frequent repositioning or high-precision positioning. The pulley can be removed simply by loosening the bolts, making maintenance easy. In operation, rotational power from a motor is transmitted through the meshing timing belt and pulley, providing rotary drive (motor→shaft) or repeatable high-precision positioning. Selection criteria include the pulley tooth profile (such as trapezoidal or curvilinear), tooth count, pulley width, bore diameter range, bushing specifications, material, and surface treatment. The pulley tooth profile and belt width must match the timing belt, while the shaft diameter and the bushing's rated torque and allowable axial force must suit the load.

Clamp-Type Timing Pulleys
A clamp-type timing pulley is secured to a shaft by clamping, typically using just one bolt without requiring a keyway. It is easy to install, remove and align. It transmits rotational power from a motor and can also be used in repetitive-motion applications requiring high-precision positioning, making it suitable for timing belt drives in automation equipment. The catalog page provides only an overview of the product series and its applications; it does not list specific models, tooth counts, belt widths, bore diameters, pitches or other dimensions, or the product coding rules. Consult the complete dimension table when selecting a product.

Toothed Idler Pulleys
Toothed idler pulleys are a type of timing pulley supplied with a surface finish and pre-installed bearings, ready for immediate installation. They are primarily used to transmit motor power and can also serve as conveyor pulleys, enabling highly accurate, repetitive positioning without rotating the workpiece. Common tooth profiles include trapezoidal and rounded teeth. Materials include 45# steel and aluminum alloy, with surface treatments such as anodizing, black oxide, and nickel plating. Bore options include through bores, keyed bores, and keyless types. They are suitable for power transmission and tensioning applications in automated equipment, conveyor lines, packaging machinery, and more.

Shenma 45# Steel Double-Step Idler Pulley with Dual Bearings
An idler pulley, also known as a tensioning idler, is an auxiliary pulley in a synchronous belt drive system. Its running surface is toothless, and it is used to tension the timing belt, increase the belt wrap angle, change the belt path, or reduce belt vibration. This series of 45# steel double-step idler pulleys with dual bearings is produced by Shenma (Tongcheng Timing Pulleys). The pulley body is machined from 45# carbon structural steel and surface-treated for improved wear and corrosion resistance. Its double-step design accommodates two belt widths or paths on a single pulley. Two integrated rolling bearings, one at each end, provide smooth rotation with low resistance. The pulley can be mounted directly on a shaft or bolt without a separate bearing housing. Key selection criteria include compatible belt type and tooth pitch, pulley outer and step diameters, overall and step widths, shaft hole or bore diameter, bearing model and mounting method, flange configuration, and surface treatment. These pulleys are widely used for timing belt tensioning and guidance in automated equipment such as packaging machines, conveyor lines, engraving machines, and 3D printers.

Timing Belts
Timing belts transmit rotational power from a motor and work with timing pulleys to provide high-speed, high-precision positioning and power transmission. The range includes timing belts for general power transmission, timing belts with attachments mounted on the back for intermittent conveying, long timing belts (polyurethane types with a selectable number of teeth and lengths up to 10m, and fabric-covered types with a low-friction surface for accumulation conveying and noise reduction), and open-ended belts for reciprocating motion, with metal connectors available. They are widely used in factory automation equipment requiring high-precision positioning.

Timing Belts with Attachments
Timing belts with attachments are toothed belts fitted with components such as stops, clamps, or pushers on their backs, primarily for conveying applications. Used with timing pulleys, they convert motor rotation into linear conveying motion over fixed distances, including reciprocating motion. They are suitable for repetitive conveying applications where the conveyed objects must not rotate and precise positioning is required. Unlike standard power transmission timing belts, their attachments can push or hold workpieces directly, eliminating the need for additional fixtures. They are commonly used in step-feed, indexing, and accumulation sections of automated production lines. They belong to the same product family as standard timing belts, extended timing belts with a specified tooth count and a maximum length of 10m, fabric-backed extended timing belts, and open-ended belts. Selection typically involves confirming the tooth profile, such as trapezoidal or curvilinear, belt width, tooth count or circumference, attachment shape and mounting position, and belt material. This series is supplied by Shenma Transmission/Tongcheng Timing Pulleys, with short lead times for standard products.

Extended-Length Timing Belt (Polyurethane)
This extended-length polyurethane timing belt is designed for power transmission. The tooth count can be specified to suit your requirements, with lengths up to 10m. It is suitable for synchronous drive applications requiring longer spans or custom circumferences. Commonly used to transmit rotary power between motors and shafts, it can also be used for repetitive conveying applications requiring high positioning accuracy. When used with timing pulleys, it provides smooth, quiet operation and wear resistance.

Extended-Length Fabric-Backed Timing Belt
The extended-length fabric-backed timing belt is a variant with a layer of low-friction fabric bonded to the back of the toothed belt, which is typically made of polyurethane. This reduces the coefficient of friction on the conveying surface and lowers operating noise. It is primarily used in accumulation conveyors, where items stop while the belt continues to slide beneath them. It is also suitable for reciprocating and positioning conveyors that require quiet, low-friction operation. Like standard extended-length timing belts, it can be specified with a custom tooth count and circumference, making it suitable for long-distance power transmission. When selecting a belt, determine the tooth specifications (pitch and profile), belt width, tooth count or circumference, cord material, and fabric type. Refer to the catalog selection tables for specific dimensions and tolerances.

Open-Ended Belts
An open-ended belt, also known as an open-ended timing belt or open-ended toothed belt, is a timing belt without an endless joint. Its teeth engage with timing pulleys to transmit motion, while its ends are secured to the moving component and a fixed mount, respectively. This makes it particularly suitable for reciprocating linear motion and long-travel positioning. The belt can be cut to the required length for the travel distance, and its ends secured with metal connectors, clamp plates, or toothed clamps. Belts are commonly made of polyurethane or rubber and reinforced with tensile cords such as steel wire or Kevlar. When selecting a belt, check the tooth profile, pitch, width, and allowable tension, and pair it with compatible timing pulleys with the appropriate number of teeth. In the Tongcheng/Shenma timing pulley product line, open-ended belts belong to the timing belt category and are supported by a wide range of compatible metal connector sizes.

S5M Timing Pulleys
S5M timing pulleys serve as drive or driven pulleys in curvilinear-tooth timing belt systems and are designed for use with S5M timing belts with a 5mm pitch. This is a Type A finished-bore series. The pulleys are made of aluminum alloy, with machined aluminum alloy flanges and a clear anodized finish. All specifications listed in the table are available from stock and shipped in cartons or wooden crates. Available tooth counts range from 14~88, with tooth outside diameters of approximately 21.14~420.36mm, pitch diameters of approximately 22.28~422.50mm, flange outside diameters of approximately 25~780mm, and flange inside diameters of approximately 15~95mm. Four overall thicknesses are available: 15/21/26/31. Bore diameters are available in 5/6/8mm, and set screws are M3 or M4. Widely used in precision drive, positioning, conveying, and automation mechanisms, these pulleys can be selected by tooth count, bore diameter, and overall thickness.

XL Timing Belt Pulleys
XL timing belt pulleys have trapezoidal teeth and an imperial pitch of 5.08mm (0.2 inches). This page covers the B-type flanged series with standard bores. The pulley body is made of aluminum alloy, with galvanized iron flanges. Designed to mesh with XL trapezoidal-tooth timing belts, these pulleys are widely used in office equipment, packaging machinery, light industrial automation, and low-power drives. The catalog lists dimensions for models with 10~69 teeth: tooth outside diameter D0 approximately 14.80~120.77mm, pitch diameter approximately 16.17~121.28mm, flange outside diameter PD approximately 21~126mm, flange inside diameter BD approximately 13~108mm, inner groove width a approximately 10.3~84mm, and optional standard bore diameter d of 6~25mm. All models listed in the table are in stock and can be shipped in cardboard cartons or wooden crates. Select a model based on the required tooth count and bore diameter.

L-Type Timing Pulleys, B-Type Standard Bore Series
L-type timing pulleys in the B-type standard bore series are standard trapezoidal-tooth pulleys (L tooth profile, 9.525 mm pitch) designed for use with L-type timing belts. They are widely used for fixed-ratio power transmission and positioning in general automation equipment for packaging, printing, conveying, textiles and other applications. The series covers 10~58 teeth, with tooth outside diameters D0 from 29.56 mm to 217.54 mm, pitch diameters from 30.32 mm to 218.30 mm, flange outside diameters from 34 mm to 229 mm, flange inside diameters from 22 mm to 200 mm, and hub diameters from 20 mm to 135 mm. All B-type standard bore models have an 8 mm bore d. Overall thickness D is available in 38 mm and 48 mm, with corresponding groove widths A of 21 mm and 27 mm. The pulley body is made of aluminum alloy, with galvanized iron flanges. The entire series is regularly stocked, and 45# steel versions are also available. Products are shipped in cartons or wooden crates. Select the required tooth count (which determines the outside and pitch diameters) and the combination of overall thickness and groove width, then machine the bore to suit the equipment shaft diameter or select

H-Type Timing Belt Pulleys, B-Type Standard Bore Series
Tongcheng (Shenma Transmission) B-type standard bore timing belt pulleys are available in two tooth profiles: H-type (1/2″ pitch, 10~50 teeth) and L-type (3/8″ pitch, 10~58 teeth). The pulley body is aluminum alloy, with 45# steel available as an option; the flanges are galvanized iron. Specifications include tooth count, tooth outside diameter D0, pitch diameter, flange outside diameter PD, flange inside diameter BD, hub diameter, overall thickness W (H-type 48/52mm, L-type 38/48mm), groove width A (H-type 27/32mm, L-type 21/27mm), and bore diameter d (H-type 10mm, L-type 8mm). The full range is stocked by tooth count, and all sizes listed in the table are available from stock. Products are shipped in cartons or wooden crates and are suitable for timing belt drives in general power transmission, conveying, and automation equipment.

MXL Series Timing Belts
MXL series timing belts are miniature imperial trapezoidal-tooth belts with a tooth pitch of 2.032 mm (0.08 in). They are commonly used in light-duty drives for office equipment, precision instruments, small motors, and similar applications. The model designation has three parts: the imperial pitch length code + MXL + the belt width code. For example, in 72 MXL 025, 72 is the pitch length code (in units of 0.1 in), and 025 indicates a belt width of 6.35 mm. These belts offer a consistent tooth profile, smooth operation, and low noise. They are compatible with a range of standard MXL pulleys and are available in various pitch length and width combinations.

XL Series Timing Belts
XL series timing belts are imperial trapezoidal-tooth belts with a pitch of 5.08 mm (0.2 inches). The model designation consists of a pitch length code followed by XL, with the number indicating pitch length in tenths of an inch. For example, 44XL has a pitch length of 4.4 inches (111.76 mm) and 22 teeth. The catalog covers 44XL to 600XL, with 22–324 teeth and pitch lengths of 111.76–1645.92 mm. These belts are suitable for light-duty applications such as office equipment, packaging machinery, textile machinery, and small drives. Belt width, pulleys, and flanges must be selected separately for the operating conditions.

L-Type Timing Belt
The L-type timing belt is an imperial trapezoidal-tooth belt with the tooth profile code L, commonly used in general industrial power transmission. Selection is based on the model, number of teeth, and pitch length. The L suffix denotes the L-type tooth profile, while the preceding number is the pitch length code. The catalog lists numerous sizes from 150L to 1580L, along with their corresponding tooth counts and pitch lengths. This series is suitable for applications requiring synchronous drive, low noise, and moderate load capacity, and can be used with matching L-type pulleys. Refer to the manufacturer's specifications for exact tooth counts and pitch lengths. Some values in the table may require verification due to missing decimal points or misaligned rows caused by OCR.

H Series Timing Belts
The H series consists of Shenma Transmission H-type timing belts, presented in the catalog with a tooth profile diagram and model table. These trapezoidal-tooth belts are available in standard models from 145H to 1000H, with 29~200 teeth and pitch lengths of 368.30~1630.20 mm. Model codes combine a pitch length designation with the H belt type identifier, as in 145H, 480H and 1000H. They are suitable for industrial drives requiring a constant transmission ratio, low noise and smooth operation. Select a model by tooth count and pitch length.

XH Series Timing Belts
XH series timing belts are Jaguar-brand industrial toothed belts. This page covers XH, 2M, 3M, and other tooth profiles. Each belt model combines a pitch length code and a tooth profile code (for example, 240-2M indicates a 240mm pitch length and a 2M tooth profile). Belt width is specified by a width code, with common widths of 3.5mm and 10mm. The XH profile has a pitch of 22.225mm, the 2M profile has a pitch of 2mm, and the 3M profile has a pitch of 3mm. The table lists the tooth count and pitch length for each model, with pitch lengths of approximately 81~744mm and tooth counts of approximately 27~372. Jaguar timing belts have short lead times and can ship as early as the same day. They are suitable for power transmission, conveying, and other automated equipment.

Jaguar Timing Belts
Jaguar (Shenma Transmission) curvilinear-tooth timing belts are available in 3M and 5M tooth profiles, with pitches of 3.00mm and 5.00mm respectively. Reinforced with fiberglass or aramid cords and made with neoprene or polyurethane belt bodies, they offer accurate transmission ratios, no slippage, low noise and flex resistance. They are widely used in CNC machine tools, packaging machinery, textile machinery, printers and automated conveyor lines. Products are designated by “pitch length-tooth profile code-belt width code”. For example, 670-5M-15 indicates a pitch length of 670mm, a 5M tooth profile and a belt width of 15.0mm. Standard pitch lengths range from 1401~1800mm for 3M and 180~1480mm for 5M. The tooth count varies with pitch length according to the pitch. Select a belt based on the equipment's center distance and pulley tooth count.