Linear Motion Accessories — Page 4

LM M Series Linear Ball Bushings

LM M Series Linear Ball Bushings

LM M Series linear ball bushings are made of stainless steel and feature synthetic resin retainers that effectively reduce noise during movement. Available in standard and cylindrical designs, they have inner diameters ranging from 3 mm to 40 mm. Depending on the size, they feature 4, 5, or 6 rows of balls. Options include stainless steel retainers (suffix A), adjustable-clearance models (-AJ), and open models (-OP); seals can also be specified. Precision grades include precision (P) and high (H), meeting a range of application requirements. These bushings are widely used in precision linear-motion guide systems.

ST Series Linear Stroke Bearings

ST Series Linear Stroke Bearings

ST Series Linear Stroke Bearings are high-precision linear motion bearings designed to support and guide linear movement. They offer low friction, high load capacity, and a long service life. The series includes two models, ST...UU and ST...UUB: UU is the standard type, while UUB is the heavy-duty, short-stroke type. Bore diameters range from 8 mm to 100 mm, with maximum strokes from 12 mm to 144 mm. Dynamic load ratings range from 0.98 kN to 43.9 kN, static load ratings from 0.27 kN to 36.8 kN, and weights from 17 g to 2,940 g. They are suitable for applications requiring linear guidance, including automation equipment, machine tools, and industrial robots. Made to international standard dimensions, they can replace imported bearings of the same size.

KH Series Linear Bearings

KH Series Linear Bearings

KH Series linear bearings are linear-motion bearings characterized primarily by the number of ball rows, designed for precision linear-motion systems. This series has bore diameters from 6 mm to 50 mm, outside diameters from 12 mm to 62 mm, lengths from 22 mm to 70 mm, and 4 to 9 ball rows. Dynamic load ratings range from 400 N to 5,500 N, while static load ratings range from 239 N to 6,300 N. Model numbers begin with “KH,” followed by codes for the bore and outside diameters; the “PP” suffix indicates the seal material (polyoxymethylene). These bearings are widely used in automation equipment, precision machine tools, electronic equipment, and other applications requiring low-friction, high-precision linear motion.

SBR Series Linear Sliding Unit Support Block

SBR Series Linear Sliding Unit Support Block

SBR Series Linear Sliding Unit Support Blocks are designed for linear sliding units with shaft diameters from 12 mm to 50 mm. They are available in various standard lengths up to 6,000 mm, with standardized mounting-hole positions and comprehensive dimensional specifications. Made from high-quality steel, these support blocks offer high rigidity and stability. They are widely used in automation equipment and mechanical transmission systems to provide reliable support for linear motion. The dimension table lists detailed mounting dimensions for each model, while the weight table provides reference weights for different lengths.

TBR Series Linear Motion Unit Supports

TBR Series Linear Motion Unit Supports

The TBR Series linear motion unit supports are designed to support sliding units on linear guides, providing stable guidance for linear motion. The range includes four models—TBR16, TBR20, TBR25, and TBR30—for shaft diameters of Φ16, Φ20, Φ25, and Φ30, respectively. A variety of standard lengths are available, up to 6000 mm. Suitable for automation equipment, machine tools, industrial machinery, and other applications requiring high-precision linear motion support.

SBR Series Linear Slide Unit Block

SBR Series Linear Slide Unit Block

SBR series linear slide unit blocks are used with linear bearings and are widely applied in linear motion systems such as automation equipment, CNC machine tools, and precision positioning systems. The series is available in two types: SBR...UU (single bearing) and SBR...LUU (double bearing), with 10 sizes covering SBR10 through SBR50. The blocks are made of high-quality steel with a wear-resistant surface treatment, offering high rigidity, high load capacity, and a long service life. Dimensions include height h, width W, length L, mounting hole spacing B/C, and thread size S. See the catalog for detailed installation dimensions. Compatible linear bearings are from the LM...UU-OP series, with basic load ratings ranging from 350 N to 3,820 N and dynamic load ratings from 500 N to 7,940 N to meet different load requirements. Block weight increases with size, ranging from 63 g to 3,000 g.

SCS Series Linear Sliding Unit Block

SCS Series Linear Sliding Unit Block

SCS series linear sliding unit blocks are made of high-quality steel and are suitable for linear motion systems in automation machinery, industrial robots, CNC machine tools, and other applications. Used with linear guide rails, these blocks provide high-precision, low-friction linear motion. The series includes 13 sizes, from SCS6LU to SCS60UU, with widths ranging from 30 mm to 132 mm and lengths from 25 mm to 122 mm to meet different load and installation-space requirements. The blocks feature standard mounting threaded holes and counterbores for easy installation. Dimensions include height H, width W, length L, and mounting-hole spacing. See the table for detailed dimensions.

SCJ Series Linear Slide Unit Block

SCJ Series Linear Slide Unit Block

The SCJ Series linear slide unit block is a slider assembly with a built-in LM...UU AJ-type linear bearing, suitable for shaft diameters from 10 mm to 50 mm. It has a dynamic load rating of 370–3820 N and a static load rating of 540–7930 N. Available in a range of sizes to meet different load and mounting dimension requirements. Widely used in automation equipment, mechanical transmission systems, and other applications.

SC...VUU Linear Slide Unit Support Series

SC...VUU Linear Slide Unit Support Series

The SC...VUU linear slide unit support series comprises ball-bearing linear motion units designed for linear guide systems. It is available in 11 sizes, from SC8VUU to SC50VUU. Key dimensions include width W, height H, and length L. Load ratings cover both dynamic and static load capacities, and weights range from 27 to 2,100 g. Dynamic load ratings range from 274 N to 3,820 N, while static load ratings range from 392 N to 7,940 N. Mounting thread sizes range from M4 to M10 to suit different installation requirements. These products are widely used in automation equipment, CNC machine tools, precision measuring instruments, and other applications, and feature high precision, high rigidity, and low friction.

SCE Series Linear Motion Bearing Blocks

SCE Series Linear Motion Bearing Blocks

SCE Series linear motion bearing blocks feature a linear bearing design that offers low friction, high precision, and high load capacity. They are widely used in linear motion systems for automation equipment, machine tools, and industrial robots. Models range from SCE8UU to SCE50UU and are available in various mounting dimensions (h, D, W, L, F, T, B, C, etc.). Dynamic load ratings range from 274 N to 3,820 N, static load ratings from 392 N to 7,940 N, and weights from 52 g to 3,340 g. These blocks are interchangeable with the international standard LM series (such as LM8UU to LM50UU) and fit a variety of guide shafts.

SCE Series Linear Motion Support Units

SCE Series Linear Motion Support Units

SCE series linear motion support units are designed for linear movement and feature a ball-retainer construction for high rigidity and low friction. They are suitable for a wide range of automation equipment. Models range from SCE8LUU to SCE50LUU, with different dimensions and load capacities. Mounting dimensions include height h, outside diameter D, width W, length L, mounting-hole spacing F, thickness T, center distance B, and hole spacing C, along with the corresponding mounting screw specifications.

Cylindrical Linear Guide (Shaft) Series

Cylindrical Linear Guide (Shaft) Series

We specialize in high-precision linear shafts and matching aluminum supports. Because the balls act directly on the shaft surface, particular care is taken during shaft production to control hardness, surface roughness, and dimensional tolerances. Available types include standard (GF and TF), chrome-plated (GD and TD), and stainless steel (FS). Materials include GCr15 or S45C high-carbon steel. Hardness: HRC 62+2 (HRC 58 for SUS45C); surface hardening depth: 0.8–2.5 mm; surface roughness: 0.8S–1.6S; straightness: 80 μm/1000 mm; roundness: no more than 3.0 μm (Rmax). Solid and hollow linear shafts are available. Solid shafts are available in sizes compatible with all of our linear bearings; hollow shafts are available only in diameters greater than 12 mm. Special shafts are also available, such as shafts with threaded holes for connection to support rails.

Cylindrical Linear Guide Shaft Series

Cylindrical Linear Guide Shaft Series

This series consists of cylindrical linear guide shafts and includes 20 shaft diameter sizes, from SQ3 to SQ80. Shaft diameters range from Φ3 to Φ80 mm, with a G6 tolerance grade. Available materials include chrome-plated GCr15 steel, standard 45# high-carbon steel, and stainless steel (SUS440C). These standard items are kept in stock in lengths from 100 to 2,000 mm, with weights ranging from 0.06 to 39.6 kg. Suitable for linear motion guidance, automation equipment, and other applications.

HG Series Linear Guideways

HG Series Linear Guideways

The HG Series linear guideway is a high-precision, high-rigidity linear motion guide widely used in automation equipment, CNC machine tools, precision measuring instruments, and other applications. The series includes several subseries, such as HGH, HGW, and HGL, and is available in a range of sizes and load capacities to provide low-friction, high-precision linear guidance.

EG Series Linear Guides

EG Series Linear Guides

EG Series Linear Guides are high-precision linear motion guides manufactured by Zhejiang Siqiang Bearing. They offer high rigidity, high load capacity, and excellent interchangeability. The series comprises two subseries, EGH and EGW: EGH is the standard type, while EGW is the wide type. Each is available with SA (top-mounted) or CA (bottom-mounted) blocks, making them suitable for automation equipment, machine tools, industrial robots, and other applications. The guides are made from high-quality bearing steel and precision-ground to achieve accuracy grades up to P. The blocks contain recirculating balls for low-friction linear motion.

MGN Series Miniature Linear Guides

MGN Series Miniature Linear Guides

MGN Series miniature linear guides are designed for compact precision equipment. Available in MGN-C and MGN-H types, they come in sizes such as MGN5 and MGN15. Their compact design and high precision make them ideal for positioning mechanisms in semiconductor, medical, optical, and other applications.

MGW Series Miniature Linear Guideways

MGW Series Miniature Linear Guideways

MGW Series miniature linear guideways are designed for precision positioning in light-load applications, delivering high accuracy and low-friction linear motion. The series includes two types, MGW-C and MGW-H. Refer to the product catalog for detailed dimensions and specifications. Products are typically made of stainless steel or high-carbon steel, with precision-ground blocks and rails for smooth operation.

SFU/DFU Series Ball Screws

SFU/DFU Series Ball Screws

This series of ball screws includes SFU and DFU types, designed for precision transmission and positioning. Diameters range from 12 mm to 63 mm, with leads of 5 mm and 10 mm, ball diameters of 3.175 mm and 6.35 mm, and 3- or 4-circuit designs. They offer high rigidity and load capacity and are widely used in machine tools, automation equipment, and other applications.

DFU Series Ball Screws

DFU Series Ball Screws

The DFU series features internally recirculating ball screws with a large lead, making them suitable for high-speed feeds and heavy-load applications. The series offers high rigidity, high precision, and a long service life, and is widely used in CNC machine tools, automation equipment, and precision positioning systems. Key specifications for model DFU 6310-4: screw diameter 63 mm, lead 10 mm, ball diameter 6.350 mm, dynamic load 5,070 kg, static load 16,600 kg, and rigidity 122 kg/μm. The nut mounting dimensions follow standard specifications for easy replacement and installation.

EK Series Linear Bearing Support Blocks

EK Series Linear Bearing Support Blocks

EK Series linear bearing support blocks are fixed-side support units designed for mounting and securing linear bearings. The series is available in various shaft diameters, including models EK-6, EK-8, EK-10, and EK-20, to meet different load and precision requirements. Compact and easy to install, these products are widely used in automation equipment and mechanical transmission systems.

EF Series Linear Bearing Support Block

EF Series Linear Bearing Support Block

The EF Series Linear Bearing Support Block is a support-side unit that supports the shaft end of a linear bearing and withstands axial loads, ensuring stable operation of the linear motion system. Compact and easy to install, it is designed for use with linear bearings.

BK Series Support Units

BK Series Support Units

BK Series support units are designed to secure and support the ends of lead screws. They are typically used with ball screws to provide axial positioning and support. The series includes fixed-side and support-side units: the fixed-side unit secures the screw axially, while the support-side unit supports its free end. Featuring high-precision bearings and a robust housing, BK Series support units ensure stability and long service life during high-speed operation. They are widely used in linear motion systems, including CNC machine tools, automation equipment, and industrial robots.

FF Series Support Units

FF Series Support Units

FF Series Support Units support the shaft ends of linear motion systems and are available in two types: fixed side (FK) and support side (FF). Featuring high-precision bearings and a retaining-ring design, they are easy to install and suitable for linear motion shafts with diameters of 6–30 mm. The housing is made of aluminum alloy, and the bearings are sealed with metal dust covers. A range of sizes is available to meet different load and precision requirements.

FK Series Support Units

FK Series Support Units

FK Series Support Units are round, fixed-side support units designed to support the ends of ball screws, providing high rigidity and positioning accuracy. They are typically used with FF Series floating-side support units in precision drive systems such as automation equipment and machine tools. The bearings feature ZZ double-sided dust shields, and the supported shaft diameters range from 6 mm to 30 mm. Mounting dimensions include parameters such as D, B, H, and P. See the catalog for detailed specifications.

EK Series Support Units

EK Series Support Units

This page recommends H-type (H1, H2, H3) bearing-end shapes for FK- and EK-type support units. The table lists dimensional data for various design parameters, including screw diameter, bearing diameter, bearing-section diameter, metric thread, width across flats, H2-type keyway, H2-type flat machining, and support-unit position. Specific specifications include an M4 × 0.5 thread and a width across flats of 7.

FF/EF/BF Series Support Units

FF/EF/BF Series Support Units

FF/EF/BF series support units are designed for the fixed and supported ends of ball screws. A K-type bearing end-face shape is recommended. Various sizes are available, for ball screw shaft diameters from 14 to 55 mm and bearing seat diameters from 8 to 40 mm. Dimensions comply with JIS B 1192-1997. Custom sizes are available on request.

BK Series Bearing Supports

BK Series Bearing Supports

BK series bearing supports are specially designed components for supporting ball screws. They feature standard mounting dimensions and are compatible with screws with shaft diameters of 10–40 mm. Typically made of cast iron, they offer high rigidity and excellent wear resistance, making them suitable for precision linear motion applications. The series includes multiple models (BK10 to BK40) for different shaft diameters. Their mounting hole spacing and overall dimensions comply with industry standards, helping ensure stable screw operation.

BF Series Support Units

BF Series Support Units

BF Series support units are standard components used to support both ends of a ball screw. They come in two types: fixed-side (BF) and support-side (EK). The BF series accommodates shaft diameters of 8–40 mm, is made of high-strength cast iron, and features a C-shaped retaining ring, with a full range of mounting dimensions. The compact EK series is designed for smaller screws with shaft diameters of 4–8 mm. These products are widely used in automation equipment, CNC machine tools, and other applications requiring precise linear motion.

EK Series Support Units

EK Series Support Units

EK Series Support Units are precision units designed to support ball screws or guide shafts. They accommodate shaft diameters from 4 to 8 mm and are available in fixed-side and support-side configurations. Their compact design makes them easy to install, and they are suitable for automation equipment, CNC machine tools, precision positioning systems, and other applications. Key dimensions include overall length L, width B, height H, keyway width b, keyway height h, mounting-hole spacing P, and thread specifications. These units offer high rigidity and stability. The series has mounting dimensions and performance requirements similar to THK's EK series, making it a suitable replacement or cost-effective alternative.

EF Series Bearing Blocks

EF Series Bearing Blocks

EF Series bearing blocks are precision components designed to support linear guide shafts and are suitable for guide systems with various shaft diameters. Made from high-quality steel, they offer high rigidity and stability. A range of sizes is available to meet different load and mounting requirements. Technical specifications include shaft diameter, mounting hole spacing, and overall dimensions. These bearing blocks are suitable for automation and mechanical drive applications.

FF Series Bearing Blocks

FF Series Bearing Blocks

FF Series bearing blocks are flange-type housings designed for linear bearings, providing stable support and guidance. The bearing is secured with a C-shaped retaining ring for easy installation. Available for shaft diameters from 6 to 30 mm, they accommodate various sizes of linear bearings. Their compact design makes them suitable for automation equipment, machine tools, industrial machinery, and other applications.

FK Series Support Units

FK Series Support Units

FK Series support units are precision components designed to support and secure lead screws or smooth shafts in linear motion systems. They are typically used with linear guides or ball screws. The series includes seven models—FK10, FK12, FK15, FK17, FK20, FK25, and FK30—with shaft diameters ranging from 10 mm to 30 mm to suit different load requirements. Each unit consists of a bearing housing, bearing, mounting plate, spacer, oil seal, locking bolt handle, and hex socket set screw. Its compact design makes installation easy. The specifications table provides detailed overall dimensions for each model (including L, H, F, E, Dg6, A, and P.C.D.), dimensions for two mounting methods (L1/T1 and L2/T2), and weight. Choose a model to suit the available installation space and load requirements. The support unit is typically made of steel, and surface treatment can improve corrosion resistance. These units are widely used in automation equipment, machine tools, packaging machinery, and industrial robots.

AK Series Support Units

AK Series Support Units

AK Series Support Units are precision components designed to support the ends of ball screws. Each unit consists of a bearing housing, bearing, base plate, spacer, oil seal, locking bolt handle, and other components. They offer high rigidity, high precision, and easy installation. Available for shaft diameters of 10–25 mm, they come with multiple mounting options (L1/L2/L3, etc.) and can withstand combined axial and radial loads. They are widely used in automation equipment, robotics, CNC machine tools, and other fields. Each product is carefully assembled and tested before shipment to ensure reliable long-term operation.

AK Series Bearing Blocks

AK Series Bearing Blocks

AK Series bearing blocks are precision components designed to support the ends of ball screws. Their compact design accommodates a range of shaft diameters. The series includes models such as AK1022, AK1223, AK1526, and AK1528, for shaft diameters of 10 mm, 12 mm, and 15 mm (with two different specifications for 15 mm shafts). Each unit consists of a housing, bearing, mounting plate, and other components. Mounting holes and an oil seal help ensure smooth, stable screw operation. Specifications include overall length (L), width (B), height (H), mounting-hole spacing (P), and counterbore dimensions (d1/d2). Weights range from 0.48 to 0.63 kg. Compatible with C-type retaining rings for quick assembly, these bearing blocks are widely used in automation equipment, machine tools, and precision drive systems.

AF Series Bearing Housings

AF Series Bearing Housings

AF Series bearing housings are base assemblies designed to support linear bearings, for linear drive systems with shaft diameters of 8–25 mm. Their compact design is available in cast iron or steel, providing stable support and easy installation. Specifications include shaft diameter, length, width, height, mounting hole spacing, and bolt size to meet a range of load and application requirements. Each assembly comprises a housing body, bearing, base plate, clearance cover, oil seal, locking bolt handle, and other components to ensure reliable operation and long service life.

SBK Series Ball Screw Support Units

SBK Series Ball Screw Support Units

The SBK Series ball screw support units are available in DF and DFD types to meet different load requirements. Specifications include basic dynamic load rating, permissible axial load, preload, axial rigidity, locknut torque, weight, and shaft-end dimensions. Models range from SBK 25DF to SBK 45DFD.

WBK DF Series Support Units

WBK DF Series Support Units

WBK DF Series Support Units are precision components designed to support the ends of ball screws in linear motion systems. The series includes three length configurations—DF, DFD, and DFF—with shaft diameters ranging from 17 to 40 mm. These units offer high rigidity and load capacity, with a maximum basic dynamic load rating of 5,250 kgf and a maximum axial static load of 10,600 kgf. Mounting dimensions are standardized, and the units are secured with locknuts. Depending on the model, weight ranges from 1.24 to 4.27 kg. They are widely used in CNC machine tools, automated machinery, precision positioning platforms, and other applications.

SFU Series Precision Ground Ball Screws

SFU Series Precision Ground Ball Screws

SFU series precision ground ball screws are high-precision, high-rigidity transmission components manufactured using a grinding process. They are suitable for precision positioning and heavy-duty transmission. A wide range of options is available, including nut styles, thread directions, shaft diameters, leads, ball-circuit counts, flange styles, manufacturing processes, accuracy grades, lengths, preload grades, and surface treatments. Accuracy grades range from C0 to C10, shaft diameters from 16 mm to 80 mm, and leads of 5 mm or 10 mm are available to meet a variety of application requirements. These products are widely used in CNC machine tools, precision machinery, and automation equipment, and offer low friction, high efficiency, and a long service life.

SFA Series Ball Screws

SFA Series Ball Screws

SFA Series ball screws are high-precision, high-rigidity linear motion components widely used in CNC machine tools, automation equipment, precision machinery, and other applications. The series includes a range of sizes, with shaft diameters from 12 mm to 50 mm and leads from 2.5 mm to 10 mm. Their recirculating ball design delivers consistent dynamic and static load ratings and rigidity. Each model is defined by parameters such as its nominal model, shaft diameter, lead, ball diameter, and nut dimensions to suit different operating conditions. Standardized interfaces make installation and maintenance easy.

SSAH Series High-Assembly Linear Guideways

SSAH Series High-Assembly Linear Guideways

SSAH Series High-Assembly Linear Guideways are designed for precision linear motion systems, offering high load capacity and rigidity. Carriage styles include flange type (C), square type (V), and low-profile square type (L), in sizes from 15 to 65 mm. Load classes are heavy-duty (C) and extra-heavy-duty (H). Carriages can be mounted from the top (A), from the bottom (B), or from either the top or bottom (C), with special machining also available (E). Guide rail mounting options include top mounting (R/U) and bottom mounting (T). Rail lengths are made to order, and rail load classes are heavy-duty (C) and medium-duty (S). This series is widely used in CNC machine tools, automation equipment, precision measuring instruments, and other applications.

SFK Series Ball Screw and Nut Assembly

SFK Series Ball Screw and Nut Assembly

The SFK Series Ball Screw and Nut Assembly is available with shaft diameters of 4–25 mm, leads of 1–4 mm, and ball diameters of 0.8–2.5 mm. It has dynamic load ratings of 64–540 N, static load ratings of 97–2,381 N, and rigidity of 4–46 N/μm. Designed for precision positioning and transmission, it is widely used in automation equipment, machine tools, robotics, and other applications. High-precision steel balls provide smooth, low-friction motion.

XSUR Series Ball Screw Assemblies

XSUR Series Ball Screw Assemblies

The XSUR Series Ball Screw Assemblies feature a high-precision design for accurate positioning and linear motion. They have a shaft diameter of 4–5 mm, a lead of 2.5 mm, and a ball diameter of 2.5 mm. The dynamic load rating is approximately 702–704 N, and the static load rating is approximately 1,409–1,413 N, with good rigidity. Typical models include XSUR01204T3D-02 and XSUR01205T3D-00. They are widely used in automation equipment, CNC machine tools, and precision machinery.

H-Series Linear Guideway

H-Series Linear Guideway

The H-Series linear guideway is a high-precision linear motion component suitable for automation equipment, machine tools, industrial robots, and other applications. The series includes a range of models, such as H15CN, H20CN, H20CE, H25CN, H25CE, H30CN, H30CE, H35CN, H35CE, H45CN, H45CE, H50CN, H50CE, H65CN, and H65CE, with different rail widths and load capacities. These products offer high rigidity, high load capacity, and low friction, and are generally interchangeable with products from international brands such as the THK HSR series and HIWIN HG series.

XR Series Linear Bearing Support Blocks

XR Series Linear Bearing Support Blocks

XR Series linear bearing support blocks secure linear bearings and provide support and mounting interfaces. The series includes two sizes, XR10 and XR12, designed for shaft diameters of 10 mm and 12 mm, respectively. Each size is available in two mounting widths, 57 mm and 60 mm, to suit different mounting surfaces. Featuring a compact design, high rigidity, and high precision, these blocks are suitable for automation equipment, machine tools, and precision machinery. The table lists detailed dimensions, including overall length, width and height, mounting hole spacing, and weight, helping users select the right model for their application.

XR Series Support Block

XR Series Support Block

XR Series support blocks provide end support and fixation for linear guide shafts. Available in two shaft diameter sizes, XR17 and XR20, for 17 mm and 20 mm shafts, respectively. Choose from three mounting widths: 80 mm, 86 mm, or 90 mm. Each product includes fixed-end and support-end bearings, using high-precision angular contact ball bearings (7203/7004) to ensure rotational accuracy and load capacity. The support block is made of cast iron and features a compact design for easy installation. Detailed mounting dimensions, including overall length, center height, and bolt-hole positions, are provided to help users select and match the right model. Suitable for automation equipment, machine tools, industrial robots, and other applications.

XR Series Motor Mount

XR Series Motor Mount

XR Series motor mounts are base accessories designed for installing motors with shaft diameters of 20 mm and 25 mm. The series includes a range of models, such as XR20-110, XR20-110B, XR25-110, XR25-110B, XR25-80, XR25-86, and XR25-90, with different mounting dimensions and designs. Each product comes complete with accessories including bearings, covers, spacers, oil seals, and locknuts to ensure accurate, stable motor installation. Precision-machined, these mounts are suitable for automation equipment, CNC machine tools, industrial robots, and other applications.

XR Series Support Units

XR Series Support Units

XR Series Support Units are precision components designed to support the ends of linear guide shafts. They use high-quality bearings and offer high rigidity and precision. This series is compatible with XR20, XR25, XR30, and other guide sizes, with a choice of mounting dimensions and two variants: standard and B type. Each unit comprises a body, bearing, cover, spacer, oil seal, and locknut. Easy to install, these units are widely used in automation equipment, machine tools, industrial robots, and other applications.

LM Series Linear Bearings

LM Series Linear Bearings

LM series linear bearings are precision linear motion components widely used in automation equipment, machine tools, electronics manufacturing, and other fields. The series includes standard models (LM...LUU) and European-standard models (LME...LUU), with a range of sizes for shaft diameters from 6 mm to 60 mm. Manufactured to high-precision standards, they maintain eccentricity and radial clearance within 15–25 μm and offer excellent load capacity and durability.