Coupling — Page 3

LTZ Elastic Sleeve Pin Coupling with Brake Wheel

LTZ Elastic Sleeve Pin Coupling with Brake Wheel

The LTZ elastic sleeve pin coupling with brake wheel features an integral construction in which the brake wheel and half-coupling are made as one piece. The brake-wheel half-coupling is made from cast or forged steel, with its outer cylindrical surface hardened. The keyway types and dimensions for the shaft bore are designated in the same way as for the LT type. It is made of No. 45 steel and is zinc-plated or phosphated. An example model designation is LTZ5-130×25×44-25×44. It is suitable for transmission systems requiring a braking function.

FCL Elastic Pin Coupling

FCL Elastic Pin Coupling

The FCL-type elastic pin coupling has a simple design, is easy to install and replace, and is compact and lightweight, making it a popular choice. When the relative displacement between the two shafts is kept within the permitted range after installation and adjustment, the coupling delivers reliable performance and a long service life. It is suitable for various low- to medium-power drive shafts with moderate loads and motor-driven operation, including those used in gear reducers, cranes, compressors, conveyors, textile machinery, hoists, and ball mills. Made from 45# steel, it is available with a black oxide, zinc-plated, or phosphated finish. Models range from FCL90 to FCL630, with a range of torque ratings, speeds, and outside diameters. Bore machining to H7/H8 tolerances is available, as is custom manufacturing to non-standard specifications.

MH-Type Core Elastic Coupling

MH-Type Core Elastic Coupling

The MH-type core elastic coupling is a flexible coupling with a certain degree of misalignment compensation. It is suitable for operating conditions where the two shaft centerlines are slightly offset, and provides cushioning and vibration-damping performance. The coupling requires no lubrication and can operate in dusty or damp environments. Its simple design makes maintenance easy; however, replacing the elastic element requires moving one half-coupling and the main shaft. The operating temperature range is -20 to +70°C, and the rated torque it transmits is 6.3 to 8,000 N·m.

JSJ Serpentine Spring Coupling

JSJ Serpentine Spring Coupling

The JSJ intermediate-shaft serpentine spring coupling uses a trapezoidal-section spring grid meshing with trapezoidal grooves to absorb shock and vibration. Its cast-aluminum housing protects the spring and retains grease for effective lubrication and noise reduction. It is suitable for applications with a large distance between the two shafts; an intermediate connecting rod enables long-distance connections. It transmits nominal torques from 140 to 160,000 N·m, with bore diameters ranging from 22 mm to 360 mm. Its simple design makes maintenance easy, and it requires no lubrication.

JS Series Serpentine Spring Coupling

JS Series Serpentine Spring Coupling

The JS Series Serpentine Spring Coupling is a metal elastic coupling with variable stiffness. Torque is transmitted by a serpentine spring strip fitted into the grooves of the two coupling halves. It features an advanced design, excellent vibration damping, and a long service life. The JS1 is the basic model, with a rated torque of 0.045 kN·m, a maximum speed of 4,500 r/min, compatible bore diameters of 18–22 mm, and bore lengths of 45–70 mm. The JSB is an axial-installation model with a housing. It has a simple, compact design and is easy to assemble and disassemble. It is made of Grade 45 steel, with a blackened surface finish; accessories are zinc-phosphated. The operating temperature range is 30°C to 150°C.

JSB Serpentine Spring Coupling

JSB Serpentine Spring Coupling

The JSB serpentine spring coupling is a flexible coupling with an axially mounted cover. Torque is transmitted by a serpentine spring strip fitted into the tooth grooves of the two coupling halves. Its design is simple, making it easy to assemble and disassemble. It has few components, a compact size, and a low weight. The axially mounted cover allows for higher operating speeds. The coupling features low noise, excellent vibration damping, a long service life, and tolerance for relatively large installation misalignment. Operating temperature: -30°C to 150°C. Made of 45# steel with a black-oxide finish; accessories are zinc-plated and phosphated. It is widely used in drive systems that require vibration damping and misalignment compensation.

JSD Single-Flange Serpentine Spring Coupling

JSD Single-Flange Serpentine Spring Coupling

The JSD single-flange serpentine spring coupling uses a serpentine spring as its elastic element, offering high elasticity and high torque transmission. It is widely used in heavy-duty and general-purpose machinery. Specially processed serpentine springs provide a long service life, allow high operating speeds, and compensate effectively for axial, radial, and angular misalignment. Transmission efficiency reaches 99.47%, and the coupling can withstand short-term overloads of up to twice its rated torque. Its simple design makes installation and disassembly easy, while its excellent vibration damping helps prevent resonance. The product is made of 45# steel with a blackened surface; zinc-plated or phosphated accessories are available. Bore diameters range from 80 mm to 260 mm, nominal torque from 5,600 N·m to 160,000 N·m, and allowable speed from 900 rpm to 2,440 rpm. Custom specifications are available, with bores machined to H7/H8 tolerances.

JSS Serpentine Spring Coupling

JSS Serpentine Spring Coupling

The JSS serpentine spring coupling is a double-flange coupling made of 45# steel, with a galvanized or phosphated surface finish and equipped with fastening screws. It offers excellent vibration damping, a long service life, a wide range of variable-load capacity, safe starting, high transmission efficiency, reliable operation, low noise, good lubrication, a simple design, easy assembly and disassembly, and tolerance for relatively large installation misalignment. Custom designs to non-standard specifications and special materials are available to meet demanding operating conditions.

GL-Type Roller Chain Coupling

GL-Type Roller Chain Coupling

The GL-type roller chain coupling is a mechanical power transmission coupling that uses a double-strand roller chain. It complies with the GB1243.1-83 standard and features a simple design for easy installation and removal. It is suitable for medium- and low-speed applications with moderate loads, and can compensate for radial, axial, and angular misalignment. Shaft bore keyway types and dimensions comply with GB/T3582-1997. The bore uses H7/H8 tolerances, and custom specifications are available. The range includes 15 models, from GL1 to GL15, with nominal torques of 40–25,000 N·m, permissible speeds of 200–4,500 rpm, shaft bore diameters of 16–70 mm, chain pitches of 9.525–63.5 mm, and 14–22 teeth.

KC Series Chain Coupling

KC Series Chain Coupling

The KC Series Chain Coupling consists of a double-strand roller chain and a pair of coupling sprockets, connected and disconnected using the chain. It features a compact design, high torque transmission capacity, excellent reliability and safety, an attractive appearance, easy installation, and straightforward alignment. Made of 45# steel with a blackened surface finish, it comes with set screws. Suitable for a wide range of power transmission applications. Custom specifications are available.

GT High-Damping Standard Type

GT High-Damping Standard Type

The GT High-Damping Standard Type coupling features a fully integrated construction, with high-damping rubber molded as one piece with the hubs at both ends to deliver excellent vibration damping. Its optimized damping and rigidity support high-gain servo motor operation and shorten settling time. It also suppresses speed fluctuations in stepper motors and reduces residual vibration during positioning, improving production efficiency and product quality. Models with outer diameters of 15–56 mm use fluorinated high-damping rubber, offering excellent resistance to heat, oil, and chemicals. Three versions are available: standard GT, extended GL, and compact GS. Product dimensions: outer diameter 15–68 mm, length 23–75 mm, bore diameter 3–35 mm; rated torque 1.1–65 N·m; maximum speed 9,000–42,000 rpm; allowable eccentricity 0.15–0.2 mm; allowable angular misalignment 1.5°; allowable axial misalignment ±0.2 to ±0.3 mm; weight 9–473 g. The coupling is made of aluminum alloy with an anodized finish and is supplied with socket head cap screws.

GLE Series Flexible Couplings

GLE Series Flexible Couplings

The GLE Series high-damping extended couplings feature an integrated design in which high-damping rubber is molded together with the hubs at both ends, delivering excellent vibration-damping and rigidity performance. Their optimized design enables high-gain servo motor operation and shorter settling times, while suppressing stepper motor speed fluctuations and residual positioning vibration to improve production efficiency and product quality. Available in outside diameters of 15–56 mm, they use high-damping fluoroelastomer with excellent heat, oil, and chemical resistance. Standard GT, extended GL, and compact GS types are also available. These clamp-type couplings are made of aluminum alloy with an anodized surface finish and supplied with socket head cap screws. A range of outside diameter × length sizes is available: GLE-15×30, GLE-19×34, GLE-25×42, GLE-30×42, GLE-34×44, and GLE-39×55. Rated torque: 0.5–13.5 N·m; maximum speed: 16,000–42,000 rpm; allowable eccentricity: 0.15–0.2 mm; allowable angular misalignment: 1.5°; allowable axial misalignment: ±0.2 to ±0.3 mm. The bore diameters at each end can be freely combined with H7/H8 tolerances, and custom specifications are available.

GS High-Damping Compact Type

GS High-Damping Compact Type

The GS High-Damping Compact Coupling is a shorter, more compact version of the GT high-damping resistant coupling. It features a fully integrated construction, with high-damping rubber molded as one piece with the hubs at both ends. Its optimized balance of vibration damping and rigidity enables high-gain servo motor operation and shorter settling times. It helps reduce speed fluctuations when driving stepper motors and suppresses residual vibration during positioning, improving productivity and product quality. Available in outer diameters of 15–39 mm, it uses fluorinated high-damping rubber with excellent heat, oil, and chemical resistance. The standard GT, extended GL, and compact GS types are all standardized. A wide range of bore sizes is available, and custom specifications can be made to order. Key specifications: outer diameter 15–39 mm; rated torque 0.5–7 N·m; maximum speed 16,000–42,000 rpm; allowable eccentricity 0.15–0.2 mm; allowable angular misalignment 1.5°; allowable axial misalignment ±0.2–0.3 mm.

GX Series High Vibration-Damping Flexible Couplings

GX Series High Vibration-Damping Flexible Couplings

GX Series flexible couplings feature a fully integrated design combining hubs on both sides with high vibration-damping rubber. They are ideal for high-response control motors, enabling high-precision positioning and shorter settling times. The range includes the GX Standard Type and GXT High-Damping Standard Type, with outer diameters of 15–56 mm and overall lengths of 23–60 mm. Bore sizes can be customized. A variety of specifications are available, with rated torques of 1.1–35 N·m, maximum speeds of 11,000–42,000 rpm, allowable parallel misalignment of 0.15–0.2 mm, an allowable angular misalignment of 1.5°, and allowable axial misalignment of ±0.2–0.3 mm. Made of alloy steel, with customizable surface treatments. Widely used in automation equipment and servo motor connections, and in other applications requiring high precision and vibration damping.

GXT High-Damping Standard Flexible Coupling

GXT High-Damping Standard Flexible Coupling

A fully integrated flexible coupling featuring hubs on both sides bonded with high-damping rubber. Designed for high-response control motors, it enables highly precise positioning and shorter settling times. The bore is machined to standard H7/H8 tolerances; custom specifications are available. A range of sizes is offered, with outer diameters of 15–56 mm and lengths of 23–60 mm.

GXC High-Damping Standard Type

GXC High-Damping Standard Type

The GXC Series High-Damping Standard Type Coupling features a fully integrated construction combining hubs on both sides with high-damping rubber. Designed for high-response control motors, it enables high-precision positioning and shorter settling times. Available in a range of outer diameters and lengths, the bore diameter can be selected as required. Special bore configurations, including keyways, hexagonal bores, square bores, and splined bores, can also be machined. Key specifications include a rated torque of 1.1–35 N·m, maximum speed of 11,000–420,000 rpm, allowable eccentricity of 0.15–0.2 mm, allowable angular misalignment of 1.5°, and mass of 8–276 g.

GLC High-Damping Extended Type

GLC High-Damping Extended Type

The GLC series is a high-damping, extended-type flexible coupling with a fully integrated design that combines hubs on both sides with high-damping rubber. It is suitable for high-response control motors, enabling high-precision positioning and shorter settling times. Model numbers begin with GLC, followed by the outside diameter × length. For example, GLC-15×30 indicates an outside diameter of 15 mm and a length of 30 mm. Various bore diameter combinations are available, with bores machined to H7/H8 tolerances. The coupling provides excellent compensation for parallel, angular, and axial misalignment.

GXS Series Flexible Couplings

GXS Series Flexible Couplings

The GXS series features compact flexible couplings with high vibration-damping capability. Their fully integrated design combines hubs on both sides with high-damping rubber. Designed for high-response control motors, they enable high-precision positioning and reduce settling time. Made of aluminum alloy with an anodized finish (custom specifications available). The bore sizes at the two ends can be freely combined, from smaller to larger, and use H7/H8 tolerances; custom specifications are available. A wide range of sizes is offered: outer diameters of 15–39 mm, lengths of 18–40 mm, maximum bore diameters of 6–20 mm, rated torques of 0.5–7 N·m, maximum speeds of 16,000–42,000 rpm, allowable eccentricity of 0.15–0.2 mm, angular misalignment of 1.5°, and axial misalignment of ±0.2 to ±0.3 mm. Suitable for precision drive systems using servo motors, stepper motors, and more.

GSC High-Damping, Compact Type

GSC High-Damping, Compact Type

The GSC Series high-damping, compact flexible couplings feature a fully integrated design in which the hubs on both sides are joined by high-damping rubber. Suitable for high-response control motors, they enable precise positioning and shorter settling times. This compact series is available in a range of models to suit different shaft diameters and torque requirements.

GSX Series Flexible Couplings

GSX Series Flexible Couplings

GSX Series flexible couplings feature a fully integrated design, with the two hubs bonded by high-damping rubber. They are suitable for high-response control motors, enabling high-precision positioning and shorter settling times. The couplings are semi-split clamp type, made of aluminum alloy with an anodized surface finish, and supplied with bolts. Custom designs and special materials are available for demanding operating conditions. Multiple sizes are offered, with outer diameters of 15–39 mm, lengths of 6.5–15.5 mm, rated torques of 0.5–3.3 N·m, and maximum speeds of up to 42,000 r/min. The bore diameters at the two ends can be freely selected, from smaller to larger, and are machined to standard H7/H8 tolerances.

CLC Magnetic Coupling

CLC Magnetic Coupling

The CLC magnetic coupling is a non-contact coupling consisting of inner and outer magnets separated by a containment can. It transmits force and torque between the drive shaft and driven shaft without direct contact. By replacing a dynamic seal with a static seal, it achieves zero leakage, making it especially suitable for applications with strict leakage requirements. The product offers vibration damping, overload protection, a wide tolerance for installation misalignment, and a long service life. The series includes five sizes, with outer diameters ranging from 45 mm to 120 mm, lengths from 60 mm to 125 mm, and torque ratings from 2 N·m to 84 N·m. Containment cans can be configured for different operating temperatures (standard: 80°C; custom options: 180–300°C). Materials include aluminum alloy and stainless steel, with anodized or zinc-plated surface finishes available. Custom designs are also supported. These couplings are widely used in sealed drive systems across the chemical, pharmaceutical, food, and other industries.

NLP Nylon Gear Sleeve

NLP Nylon Gear Sleeve

The NLP nylon gear sleeve is an internally toothed flexible coupling designed for axial and linear drive applications. It accommodates large axial and radial displacements as well as angular misalignment. Its advantages include a simple design, easy maintenance and assembly, low noise, minimal transmission-efficiency loss, and a long service life. The gear sleeve is made of nylon, and the bore diameters at either end can be freely combined, from smaller to larger sizes. The bores are machined to standard H7/H8 tolerances, and custom specifications are available on request. Standard models range from NLP-1 to NLP-8, with various tooth counts, outside diameters, heights, and module sizes to meet a wide range of transmission requirements.

PMH Core-Type Coupling Elastomer

PMH Core-Type Coupling Elastomer

The PMH core-type coupling elastomer is a precision-cast coupling component made from high-quality cast iron, with a central rubber element made from a special NBR compound. It is wear-resistant, oil-resistant, and corrosion-resistant. The outer diameter ranges from 37 to 180 mm, the inner diameter from 23 to 96 mm, and the height from 15 to 53 mm. It is available with either 6 or 8 lobes. The bore is machined to standard H7/H8 tolerances, and custom specifications are available. Suitable for a range of heavy-duty machinery, it helps absorb vibration, withstand compression, and resist aging.

PL-Type Jaw Coupling Rubber Insert

PL-Type Jaw Coupling Rubber Insert

The PL-type jaw coupling rubber insert, also known as a jaw coupling elastomer, is suitable for use with media such as mineral oil, synthetic oil, and water. It is oil-resistant, corrosion-resistant, shock-absorbing, pressure-resistant, aging-resistant, and impact-resistant. The product is available in four sizes, with outer diameters of 68–123 mm, inner diameters of 15–40 mm, jaw thicknesses of 15–40 mm, inner thicknesses of 14–21 mm, and jaw widths of 20–31 mm. The bores at both ends of the coupling can be configured as required and are machined to standard H7/H8 tolerances. Custom specifications are available. Widely used in heavy machinery, it provides a wear-resistant and durable flexible coupling solution.

A Series Coupling Elastomer

A Series Coupling Elastomer

The A Series coupling elastomer is a component designed for BWN Flender air compressor couplings. Made of polyurethane, it offers excellent wear resistance, elasticity, heat resistance, oil resistance, fatigue resistance, and impact resistance. It is suitable for connecting the drive shafts of various types of machinery and equipment, where it provides cushioning. The range includes four models: A180, A200, A225, and A250. Each model has inner and outer dimensions; the bore is machined to standard H7/H8 tolerances, and custom specifications are available. The table lists the dimensions for A, B, C, D, E, and F, as well as the height, in millimeters. These elastomers are widely used in large-scale equipment for steel rolling, lifting, and oil production, as well as in water pump couplings.

DJ Series Cross Adjustment Ring

DJ Series Cross Adjustment Ring

DJ Series Cross Adjustment Rings are made of polyacetal or aluminum bronze and are available in blue, green, black, or bronze. The operating temperature range is -20 to 80°C (polyacetal). The coupling bore diameters at both ends can be freely selected from smaller to larger sizes. Bores are machined to standard H7/H8 tolerances. The bore dimensions listed in the table are for reference only; custom, non-standard sizes can be made to meet specific customer requirements. Suitable for drive connections in factory automation equipment.

HS Elastomer Coupling Spider

HS Elastomer Coupling Spider

HS series elastomer coupling spiders feature thermoplastic elastomer teeth that withstand a wide temperature range and offer excellent oil resistance. Made from DuPont material, they are available in models HS1 to HS11. The bores at both ends of the coupling can be configured with different diameters. Bore machining is performed to standard H7/H8 tolerances. The bore dimensions shown in the table are for reference only; custom, non-standard sizes can be manufactured to meet specific customer requirements.

HXGT Couplings

HXGT Couplings

The HXGT series is a line of couplings offering high mobility, excellent elasticity, safety, strength, and a long service life. Models range from HXGT-15 to HXGT-56, with various outer diameters (15 mm to 56 mm) and lengths (6.5 mm to 19.5 mm). Each model comes with a hex-socket set screw. A variety of standard bore combinations are available (H8 tolerance); h6 and h7 are the recommended shaft tolerances. These couplings offer excellent elasticity, reliable safety, and high strength, making them suitable for a wide range of industrial drive connections.

SPDW Series Diaphragm Couplings

SPDW Series Diaphragm Couplings

The SPDW series diaphragm coupling is a high-precision flexible coupling designed to connect drive systems such as servo motors and ball screws. It uses stainless steel leaf springs as elastic elements to compensate for installation misalignment (eccentricity, angular misalignment, and axial displacement). The typical SPDW40 model is 44 mm long, allows up to 0.15 mm of eccentricity, 1.5° of angular misalignment, and ±0.5 mm of axial displacement, and supports speeds of up to 15,000 rpm. Available bore diameters include 14 mm and 15 mm, and the coupling uses a clamping-style mounting method. These products are widely used in applications requiring precision power transmission, including automation equipment, CNC machine tools, and robotics.

SMC/SMI Series Diaphragm Couplings

SMC/SMI Series Diaphragm Couplings

SMC/SMI series diaphragm couplings use stainless-steel spring-steel diaphragms to deliver high-precision power transmission while compensating for installation misalignment. The SMC series has an outer diameter of 19–38 mm, a length of 23–41 mm, a maximum bore diameter of 8–16 mm, a rated torque of 0.8–6.3 N·m, and a maximum speed of 10,000–20,000 rpm. The SMI series has an outer diameter of 16–25.4 mm, a length of 19–25.4 mm, a maximum bore diameter of 6–12 mm, and a rated torque of 0.5–2 N·m. Permissible eccentricity is 0.15 mm, angular misalignment is 3°, and axial displacement is ±0.15 mm. Suitable for precision drive applications such as servo motors, stepper motors, and ball screws. The clamp-style mounting makes installation easy.

SLC Series Diaphragm Coupling

SLC Series Diaphragm Coupling

The SLC Series diaphragm coupling is designed for servo motor drives and accommodates shaft diameters from 14 to 80 mm. It uses a clamping-style fastening method and offers high precision, high rigidity, and low inertia. It effectively compensates for parallel, angular, and axial misalignment. During installation, keep the shaft surfaces clean, ensure concentricity, and avoid applying excessive force to the diaphragm. It is widely used in precision transmission applications, including automation equipment, machine tools, and robots.

SGXC Series Couplings

SGXC Series Couplings

The SGXC series features clamp-type flexible couplings with a compact design. They have an outer diameter of 12–32 mm, a length of 14.9–33.3 mm, and a maximum bore diameter of 5–16 mm. Rated torque ranges from 0.2 to 2.8 N·m, and maximum speed reaches 52,000 rpm. They offer low inertia and static torsional stiffness of 9–190 N·m/rad. Permissible eccentricity is 0.6–2 mm, angular misalignment is 2°, and axial displacement is ±0.1 mm, making them suitable for precision power transmission. Standard bore sizes range from 3 to 16 mm. During installation, pay attention to the orientation of the D-cut shaft.

SSOXC Series Diaphragm Couplings

SSOXC Series Diaphragm Couplings

The SSOXC Series features clamp-style diaphragm couplings designed for precision drive applications, such as servo motors. They can compensate for parallel and angular misalignment. Bore diameters range from 15 mm to 38 mm; select the model to match the actual shaft dimensions. When installing on a D-cut shaft, take special care to ensure that the shaft’s flat does not come into contact with the slit perpendicular to the shaft, as much as possible, to avoid damaging the coupling.

SXC Series Couplings

SXC Series Couplings

The SXC series coupling is a clamping-type coupling designed to connect two shafts and transmit torque. It features a compact design and easy installation. Models include SXC16–50 and SXC63, with bore diameters ranging from 16 mm to 63 mm. Refer to the technical specifications for exact dimensions. During installation, avoid applying excessive loads perpendicular to the shaft slot; round shafts are recommended.

SPC Series Clamp-Type Couplings

SPC Series Clamp-Type Couplings

The SPC Series Clamp-Type Coupling secures shafts with clamping screws and is available in standard (SPC) and stainless steel (SSPC) versions. Designed for connecting small-diameter shafts, it offers high rigidity and precision. The outer diameter ranges from 16 to 32 mm, and the length from 16 to 32 mm. The maximum bore diameter ranges from 6 to 16 mm for the standard version and from 6 to 8 mm for the stainless steel version. Rated torque is 0.3–10 N·m, and maximum speed is 19,000–39,000 rpm. Its single-sided clamping screw makes installation easy. It is suitable for precision drive systems using servo motors, stepper motors, and other equipment. During installation, avoid applying excessive loads to shafts with D-shaped flats.

SFST Series Diaphragm Couplings

SFST Series Diaphragm Couplings

SFST Series diaphragm couplings are suitable for servo motors, stepper motors, and general-purpose motors. They offer zero backlash, high torque capacity, high torsional rigidity, tolerance compensation, and vibration and shock absorption. Available in SFST-V and SFST-W types, they feature a 45# steel body and SUS304 stainless steel diaphragms. Multiple bore and keyway options are available to suit different shaft diameters.

SEC Series Diaphragm Couplings

SEC Series Diaphragm Couplings

SEC Series diaphragm couplings are designed for servo motor drive systems and offer high precision, high rigidity, and low inertia. The range includes models SEC12 through SEC40. Stainless steel diaphragms compensate for shaft misalignment, angular deviation, and axial displacement. The clamp-style mounting makes installation easy. These couplings are commonly used in precision positioning and high-speed drive applications.

SFC Series Diaphragm Couplings

SFC Series Diaphragm Couplings

The SFC Series diaphragm coupling features a clamping design and uses stainless steel diaphragms to compensate for parallel offset, angular misalignment, and axial displacement. It offers high torsional rigidity and zero backlash, making it suitable for precision drive connections such as servo motors and ball screws. The outer diameter ranges from 19–82 mm, the length from 27–101.2 mm, and the maximum bore diameter from 8–40 mm. Rated torque is 0.8–100 N·m, and maximum speed is 10,000 rpm. Various standard bore sizes are available. During installation, pay attention to the position of the D-shaped flat on the shaft end.

SFT Series Couplings

SFT Series Couplings

SFT Series couplings are mechanical components that connect two shafts to transmit torque, and are suitable for drive systems such as those coupling servo motors with ball screws. The series uses diaphragm-type flexible elements to compensate for mounting misalignment and accommodate a certain degree of eccentricity, angular misalignment, and axial displacement. The shaft bores are secured with clamping screws. During installation, ensure the shaft bores are clean and properly aligned. SFT Series couplings are available in multiple sizes, including SFT34 through SFT82, to suit different shaft diameters and torque requirements.

SFG Series Diaphragm Coupling

SFG Series Diaphragm Coupling

The SFG Series Diaphragm Coupling is a high-precision flexible coupling designed for precision drive applications such as servo and stepper motors. It compensates for parallel, angular, and axial misalignment, effectively absorbs vibration, and protects equipment. The series features a stainless steel diaphragm design, high torsional rigidity, low inertia, and zero backlash. Models are available with outer diameters from 34 mm to 82 mm and bore sizes from 5 mm to 40 mm, with rated torques from 4 N·m to 10 N·m and maximum speeds of up to 10,000 rpm. It is easy to install and secured with clamping screws.

SJFC Series Diaphragm Couplings

SJFC Series Diaphragm Couplings

SJFC Series diaphragm couplings are clamp-type couplings designed for precision drive connections, such as between servo motors and ball screws. Their stainless steel diaphragm construction provides high rigidity and torque transmission capacity while effectively accommodating installation misalignment, including eccentricity, angular misalignment, and axial displacement. Models range from SJFC65 to SJFC87 to suit different shaft diameters. When installing on D-cut shafts, follow the correct assembly method to avoid damaging the coupling.

SPDT Series Disc Couplings

SPDT Series Disc Couplings

The SPDT Series Disc Coupling is a precision, clamp-type coupling designed for precision drive applications such as servo motors and ball screws. It offers high rigidity, low inertia, and zero backlash. The outer diameter ranges from 19 to 50 mm, and the length from 20 to 42 mm. Rated torque is 1–16 N·m, and maximum speed is up to 33,000 rpm. It allows 0.02 mm eccentricity, 0.8° angular misalignment, and ±0.10 to ±0.30 mm axial misalignment. The bore diameter ranges from 3 to 25 mm. It uses a clamp-style mount; h6/h7 bore tolerances are recommended, with h8 as the maximum. It is widely used in industrial automation equipment, robotic arms, CNC machine tools, packaging machinery, and other applications requiring high-precision power transmission.

SLI Series Diaphragm Coupling

SLI Series Diaphragm Coupling

The SLI Series diaphragm coupling is a high-rigidity, low-inertia clamping-type coupling designed for servo motor drive systems. It has an outer diameter range of 14–80 mm, a length range of 22–114 mm, and a bore range of 3–46 mm. It accommodates 0.1 mm of parallel misalignment, 1° of angular misalignment, and ±0.5 mm of axial displacement. Rated torque ranges from 1.2 to 190 N·m, and maximum speed reaches 10,000 rpm. The coupling features a stainless steel diaphragm and an aluminum alloy body, secured with clamping screws for easy installation. Available in various sizes and variants (including S and L suffixes) to suit different shaft diameters and torque requirements. Widely used in precision positioning systems, CNC machine tools, robots, and other automation equipment.

SMI Series Diaphragm Coupling

SMI Series Diaphragm Coupling

The SMI Series Diaphragm Coupling is a high-rigidity, high-torque, low-inertia precision coupling designed for drive systems with servo motors, stepper motors, and similar equipment. Its stainless steel diaphragm and clamp-style design compensate for eccentric, angular, and axial misalignment. The coupling has an outer diameter of 16–25.4 mm, a length of 19–25.4 mm, a maximum bore diameter of 6–12 mm, a rated torque of 0.5–2 N·m, and a maximum speed of 20,000 rpm. Its compact design makes installation easy, and it is suitable for mounting on D-flat shafts.

SPI Series Disc Couplings

SPI Series Disc Couplings

The SPI Series disc coupling is a high-precision, high-rigidity flexible coupling that uses stainless steel disc packs as flexible elements to compensate for axial, radial, and angular misalignment. It is suitable for precision drive systems such as servo motors and stepper motors. The body is made of aluminum alloy, and the discs are made of stainless steel. Standard and stainless steel versions (SSPI Series) are available. Bore diameter: 3–16 mm; outer diameter: 16–32 mm; length: 24–41 mm. Rated torque: 0.3–10 N·m; maximum speed: up to 39,000 rpm. Clamp-style fastening makes installation easy.

SFS Series Diaphragm Couplings

SFS Series Diaphragm Couplings

The SFS Series diaphragm couplings are available in two designs: V type (single diaphragm) and W type (double diaphragm). The V type offers high torsional rigidity and precision, making it suitable for precision positioning applications. The W type provides greater compensation for parallel and angular misalignment, making it suitable for general power transmission. The outer diameter ranges from 56 to 82 mm, the bore diameter from 10 to 35 mm, rated torque from 25 to 100 N·m, and maximum speed reaches 10,000 rpm. The clamp-style mounting makes installation easy. These couplings are suitable for precision drive connections involving servo motors, stepper motors, ball screws, and similar components.

SSOXI Series Couplings

SSOXI Series Couplings

The SSOXI series is a clamp-type flexible coupling with a diaphragm design, offering high rigidity, high torque capacity, and low inertia. The outer diameter ranges from 15 to 38 mm, the bore diameter from 3 to 22 mm, rated torque from 3 to 50 N·m, and maximum speed from 4,000 to 8,000 rpm. It allows 0.3–0.8 mm of parallel misalignment, 2° of angular misalignment, and ±0.1 mm of axial displacement. It is suitable for precision drive systems using servo motors, stepper motors, and similar equipment, especially applications requiring compensation for shaft misalignment. During installation, pay attention to the position of the D-flat shaft and ensure that the shaft is inserted to the L2 dimension. Made with a stainless-steel diaphragm and aluminum-alloy hubs, it is lightweight and suitable for high-speed operation.

SEI Series Couplings

SEI Series Couplings

The SEI Series features clamp-type couplings for drive connections with shaft diameters of 12–40 mm. During installation, make sure the flat on a D-cut shaft does not contact the slit, to prevent damage to the coupling. The numbers following the SEI series code indicate the outer diameter or length range, for example, SEI12–40.