Coupling — Page 2

DCG Stainless Steel Helical Beam Set-Screw Coupling

DCG Stainless Steel Helical Beam Set-Screw Coupling

The DCG series stainless steel helical beam set-screw coupling is made from a single piece of stainless steel. Its spring-like design provides cushioning and compensates for radial, angular, and axial misalignment. Designed for encoders and miniature motors, it is secured with clamping screws. The surface is polished, and fastening screws are included. Custom sizes and bore shapes are available, including keyways (add K), hex bores (add F), square bores (add S), and spline bores (add H). Suitable for precision power transmission, it is available in a range of outer diameters and lengths, with a wide selection of bore sizes.

DPS Plastic Encoder Coupling Series

DPS Plastic Encoder Coupling Series

DPS plastic encoder couplings are made primarily of PU (polyurethane), offering excellent flexibility and elasticity as well as high resistance to torsional failure. Designed specifically for encoders, they feature set-screw fastening for easy installation. The series offers high flexibility to compensate for radial, angular, and axial misalignment, with zero backlash and consistent performance in both clockwise and counterclockwise rotation. Suitable for applications requiring high-precision transmission, such as servo motors. A commonly used model is DPS-15×22, with an outer diameter of 15 mm, a length of 22 mm, a 6 mm bore, a rated torque of 0.6 N·m, allowable eccentricity of 0.2 mm, allowable angular misalignment of 2.5°, and a maximum speed of 4,000 RPM. Custom specifications are available, including a keyway (suffix K), hex bore (suffix F), square bore (suffix S), or splined bore (suffix H).

DD Encoder Spring Series

DD Encoder Spring Series

DD encoder spring series couplings feature an aluminum alloy body and a spring steel flexible element. Their simple design offers good flexibility, low inertia, a large angular misalignment allowance, and easy installation. The spring steel element effectively compensates for radial, axial, and angular misalignment. Suitable for miniature motors and encoders, they are secured with set screws. Standard surface treatment is used by default; custom specifications and special materials are available. Models include DD-16×25, DD-16×35, and DD-26×50.

DB Aluminum Alloy Figure-Eight Encoder Coupling Series

DB Aluminum Alloy Figure-Eight Encoder Coupling Series

The DB series aluminum alloy figure-eight encoder coupling is a flexible coupling designed specifically for encoders. Its hubs are made of high-strength aluminum alloy with an anodized finish, while the elastomer is made of polyurethane that resists oil and oxidation. The series offers excellent flexibility and resists torsional breakage, effectively compensating for radial, axial, and angular misalignment. Available models include DB-15×24, DB-15×31, DB-18×28, DB-18×38, DB-25×45, and DB-25×56. The outer diameter ranges from 15 to 25 mm, and the length from 24 to 56 mm. Custom bore sizes are available to meet a variety of encoder mounting requirements. Rated torque is 0.5–1 N·m; allowable eccentricity is 1 mm, allowable angular misalignment is 2°, allowable axial misalignment is ±2.5 mm, and allowable speed is 5,000–8,000 RPM. Suitable for miniature motor and encoder drives.

DR-DRC Economical Bellows Coupling

DR-DRC Economical Bellows Coupling

The DR-DRC series is an economical bellows coupling featuring a stainless-steel bellows flexible element. Its excellent flexibility compensates for radial, angular, and axial misalignment. It performs identically in clockwise and counterclockwise rotation, ensuring constant-velocity rotation. The body is made of stainless steel or aluminum alloy and has an anodized surface for strong corrosion resistance. The bellows is laser-welded to the hubs, providing zero rotational backlash and suitability for reversing operation. Set-screw fastening. Products are available in set-screw and clamp-style versions, with accessories including hex-socket set screws or hex-socket head cap screws. The DRG subseries features polished all-stainless-steel construction, freely configurable bore combinations, and custom specifications. Suitable for precision power transmission, servo motor connections, and similar applications.

DRG Series Bellows Couplings

DRG Series Bellows Couplings

DRG series stainless steel bellows couplings feature 304/316 stainless steel bellows flexures laser-welded to the hubs for zero backlash and bidirectional operation. They effectively compensate for radial, angular, and axial misalignment. Made entirely of stainless steel, they offer excellent corrosion resistance and a polished surface finish. Common sizes have outside diameters of 16–32 mm and lengths of 27–42 mm, with rated torques of 1.2–3.7 N·m and allowable speeds of 10,000–16,000 rpm. Custom bore sizes are available to suit different shaft diameters. These couplings are widely used in precision power transmission, automation equipment, and other applications.

DRCG Stainless Steel Bellows Clamping Series

DRCG Stainless Steel Bellows Clamping Series

DRCG series stainless steel bellows clamping couplings are made entirely of 304/316 stainless steel for excellent corrosion resistance. The bellows are laser-welded to the hubs, providing zero rotational backlash and making the couplings suitable for operation in both directions. The bellows design effectively compensates for radial, angular, and axial misalignment. The clamping-screw fastening method makes installation easy. The surface is polished, and set screws are included. Custom specifications are available. Key parameters include outer diameter D, length L, and bore diameters d1 and d2.

DLK Bellows Coupling with Expansion Sleeve

DLK Bellows Coupling with Expansion Sleeve

The DLK series bellows coupling with expansion sleeve uses an expansion-sleeve connection for zero rotational backlash and easy assembly and disassembly. Its flexible bellows design effectively compensates for radial, angular, and axial misalignment, with identical rotational performance in clockwise and counterclockwise directions. The main body is made of S45C steel, and the bellows are made of stainless steel. The polished surface provides good corrosion resistance. Suitable for reversing and high-precision drive applications. Models range from DLK1-40 to DLK1-1600 in increments of 5, with different outside-diameter specifications.

SK Schmidt Parallel Coupling

SK Schmidt Parallel Coupling

The SK Schmidt parallel coupling features a compact design and exceptional capacity to accommodate large parallel misalignment. Made from high-rigidity materials, it generates no restoring force when misaligned and keeps the distance between the two shafts unchanged. It is widely used in automated equipment such as packaging machinery, paper-making machines, forming equipment, printing machinery, woodworking machinery, cutting machines, carton-folding machines, and ceramic roller machines. Select a product using the model code format SK-[Length]-[Maximum Permissible Misalignment]-[OD]-[Number of Links]. A range of standard models is available to meet different torque, speed, and misalignment requirements.

DGH Aluminum Alloy Oldham Coupling Series

DGH Aluminum Alloy Oldham Coupling Series

The DGH series of aluminum alloy Oldham couplings includes two designs: set-screw and short clamp. The hubs are made of high-strength aluminum alloy, and the center disc is made of imported PA66, offering excellent wear and corrosion resistance as well as electrical insulation. The sliding-disc design effectively compensates for radial and angular misalignment, while the detachable construction makes installation easy. Set-screw models are secured with set screws, and short-clamp models with clamping screws. Outer diameters range from 12 mm to 70 mm; lengths vary by model, and multiple bore diameters are available. These couplings are suitable for low-speed drive applications requiring misalignment compensation. Custom specifications and special materials are available.

DGH Aluminum Alloy Oldham Couplings with Set Screws

DGH Aluminum Alloy Oldham Couplings with Set Screws

This series of aluminum alloy Oldham couplings features high-strength aluminum alloy hubs and imported PA66 discs, offering excellent wear resistance, corrosion resistance, and electrical insulation. The sliding design effectively compensates for radial and angular misalignment, while the detachable construction makes installation easy. Fastening options include set screws or clamping screws. A range of models is available, with outer diameters of 16–70 mm, lengths of 18–77 mm, and bore sizes of 4–38 mm, making them suitable for shaft connections in automation equipment. The surface is anodized, and custom specifications are available.

DHG Stainless Steel Oldham Couplings with Set Screws

DHG Stainless Steel Oldham Couplings with Set Screws

DHG series stainless steel Oldham couplings feature a body made of imported SUS304 stainless steel and a center disc made of imported aluminum bronze, offering excellent wear and corrosion resistance along with high rigidity. The sliding design effectively compensates for radial and angular misalignment, while the removable construction makes installation easy. The couplings have keyways and are secured with set screws. Suitable for precision drive applications, the bore can be customized as required. Common tolerances: H7/H8.

DHCG Stainless Steel Oldham Coupling

DHCG Stainless Steel Oldham Coupling

The DHCG Series stainless steel Oldham coupling features a body made from imported SUS304/316 stainless steel and a center slider made of aluminum bronze, offering excellent wear and corrosion resistance. Its sliding design effectively compensates for radial and angular misalignment. The detachable construction makes installation easy, and the coupling is secured with clamping screws. The bore is machined to H7/H8 tolerances, and custom specifications are available. A wide range of bore diameters is offered, making it suitable for a variety of precision power transmission applications. Rated torque: 3–75 N·m; permissible radial misalignment: 0.5–1.5 mm; permissible angular misalignment: 0.5–0.6°; maximum speed: 8,000 rpm.

DHP Stainless Steel High-Torque Oldham Coupling, Set-Screw Series

DHP Stainless Steel High-Torque Oldham Coupling, Set-Screw Series

DHP Series stainless steel high-torque Oldham couplings feature a body made from imported SUS304 stainless steel and a center slider made from imported POM, offering excellent wear and corrosion resistance along with high rigidity. The sliding design effectively compensates for radial and angular misalignment. The detachable design makes installation easy. These couplings feature keyways and are secured with set screws. Designed for high-torque transmission, they have rated torques of 1–25 N·m, allowable eccentricity of 0.3–2.2 mm, an allowable angular misalignment of 2°, allowable axial misalignment of ±0.2–±0.25 mm, and maximum speeds of 3,500–9,000 rpm. Bore sizes can be custom-made to customer specifications and are machined to standard H7/H8 tolerances. Available in a range of outside-diameter and bore combinations, with custom options also available.

DHPC Stainless Steel High-Torque Oldham Clamping Coupling Series

DHPC Stainless Steel High-Torque Oldham Clamping Coupling Series

The DHPC series comprises high-torque stainless steel Oldham clamping couplings. The main body is made of imported SUS304 stainless steel, while the center slider is made of imported POM, providing excellent wear and corrosion resistance and rigidity. The sliding design effectively compensates for radial and angular misalignment. Its detachable construction makes installation easy, and the coupling is secured with a clamping mechanism. Available in multiple sizes, the series offers rated torques of 1.6–3.2 N·m, allowable eccentricity of 0.6–2.2 mm, an allowable angular misalignment of 2°, allowable axial misalignment of ±0.12–±0.25 mm, and maximum speeds of 3,500–8,000 rpm. Suitable for precision power transmission applications.

WH-Type Slider Coupling

WH-Type Slider Coupling

The WH-type slider coupling uses a square cross slider that moves within radial slots to compensate for radial and angular misalignment. It is suitable for low-speed, high-torque applications such as ball mills. The series includes 10 sizes, from WH1 to WH10, with a nominal torque range of 16–5000 N·m and a maximum speed of 10,000 rpm. Bore diameters can be configured to meet customer requirements; H7/H8 tolerances are used, and custom specifications are available. This coupling is noisy, inefficient, and subject to rapid wear, so it should only be used in low-speed applications.

DJSL Oldham Coupling

DJSL Oldham Coupling

The DJSL series Oldham coupling uses an intermediate slider that moves within the radial grooves of the two coupling halves. It accommodates significant radial displacement between the shafts, as well as small angular and axial displacements. Made of No. 45 steel with a black oxide finish, it comes with fastening screws. The nominal torque range is 120–80,000 N·m, the permissible speed is 250 rpm, and the bore diameter range is 15–200 mm. Suitable for low-speed drives with significant radial misalignment.

DX Aluminum Alloy Rigid Set Screw Series

DX Aluminum Alloy Rigid Set Screw Series

The DX aluminum alloy rigid set screw series features a one-piece design made entirely of high-strength aluminum alloy, delivering high torque and rigidity. This is a rigid series with virtually no allowance for eccentricity, so careful alignment is essential during installation. It uses set screws for fastening, making installation straightforward. These products are suitable for applications requiring precise power transmission and accurate alignment, providing a reliable shaft connection. A range of bore and outer diameter combinations is available to suit different shaft sizes.

DXG Series Set Screw Couplings

DXG Series Set Screw Couplings

DXG Series Set Screw Couplings feature an integrated design and are available in two materials: stainless steel (DXG-S) and 45# steel (DXG). The stainless steel models are made entirely of SUS304/316 and polished. The carbon steel models are made of 45# steel with a blackened finish; nickel plating, zinc plating, and phosphating are available on request. These couplings offer high torque and high rigidity. As rigid couplings, they do not accommodate misalignment, so the shafts must be carefully aligned before use. They are secured with set screws (positioning screws). Bore diameters can be freely configured to meet user requirements and are machined to standard H7/H8 tolerances; custom specifications are also available. A range of sizes is offered, with outer diameters from 16 mm to 82 mm, lengths from 24 mm to 68 mm, rated torque from 5 to 175 N·m, maximum speeds from 24,000 to 3,800 RPM, and weights from 28 to 2,100 g. Suitable for high-precision positioning and drive applications involving servo motors, stepper motors, and more.

DXG-S Series Rigid Couplings

DXG-S Series Rigid Couplings

DXG-S Series stainless steel set-screw couplings are made from SUS304/316 stainless steel and feature a one-piece design for high rigidity and high torque, making them suitable for precision power transmission. They use set screws for fastening, and the bores are machined to standard H7/H8 tolerances. The two end bores can be freely combined in ascending sizes, and custom specifications are available. Multiple sizes are offered, with outer diameters from 16 mm to 82 mm, lengths from 24 mm to 68 mm, rated torque from 5 to 175 N·m, and maximum speeds from 3,800 to 24,000 RPM.

JQ Split-Shell Coupling

JQ Split-Shell Coupling

The JQ split-shell coupling has no elastomer in the middle. Its suspended design uses a central lifting ring to grip the shaft ends on both sides and transmit torque, making it suitable for vertical installation. It is commonly used to connect reactor agitator shafts manufactured in two sections when the shaft is too long, or to connect the output shaft of a vertical gear reducer to a reactor agitator shaft. It is made of 45# steel and has a zinc-plated or phosphated surface finish. Fastening screws are included. When selecting a model, specify the outer diameter, length, and bore dimensions. A keyway (suffix K), hexagonal bore (F), square bore (S), or splined bore (H) can also be added.

N-Type Rigid Coupling Locking Assembly

N-Type Rigid Coupling Locking Assembly

The N-type rigid coupling locking assembly is a keyless drive component made of Grade 45 steel with a blackened finish. Optional surface treatments include nickel plating, zinc plating, and phosphating. Tightening the bolts provides a backlash-free, high-precision fit that is easy to adjust angularly. Eliminating keyway machining also reduces overall costs. The assembly offers high torque transmission and excellent resistance to axial loads, and can handle torque and axial loads simultaneously. It can also be used with a keyway, although torque transmission is reduced by 15–20%. Model numbers begin with N-, followed by the outer diameter, length, and bore diameters d1 and d2. For example, N-13×21.5×6×6 has an outer diameter of 13 mm, a length of 21.5 mm, and 6 mm bores. Optional features include a keyway (suffix K), hexagonal bore (F), square bore (S), or spline bore (H). The assembly is suitable for confined spaces and requires no axial installation clearance.

Spline Sleeve Coupling

Spline Sleeve Coupling

A spline sleeve coupling connects two shafts using a shared sleeve and rigid connecting elements such as keys, splines, or taper pins. Keyed connections can transmit higher torque and require axial fixation with set screws, while pin connections are used to transmit lower torque. The product is made of 45# steel, with black oxide, chrome, zinc, or nickel plating available as surface finishes. Custom designs and special materials are available to meet specific operating requirements.

DXC Series Rigid Couplings

DXC Series Rigid Couplings

The DXC series features one-piece metal diaphragm couplings made with a high-strength aluminum alloy body and anodized finish. They offer zero backlash and high rigidity, making them suitable for precision power transmission. As they cannot compensate for misalignment, careful alignment is required during installation. A range of sizes is available, with shaft diameters from 4 mm to 35 mm, outer diameters from 16 mm to 95 mm, and lengths from 16 mm to 126 mm. Rated torque ranges from 10 N·m to 220 N·m, maximum torque from 20 N·m to 440 N·m, and maximum speed from 7,500 to 19,000 rpm.

DXCG Series One-Piece Metal Rigid Couplings

DXCG Series One-Piece Metal Rigid Couplings

The DXCG Series features one-piece metal rigid couplings made from No. 45 steel or stainless steel. With zero backlash and high rigidity, they transmit power and motion without loss, making them suitable for applications requiring precise alignment. The series includes two subseries: the standard DXCG and the stainless steel clamp-type DXCG-S. A variety of cross-sectional sizes are available in square and rectangular shapes. Surface finishes include black oxide, nickel plating, zinc plating, and phosphating. Rated torque ranges from 18 to 300 N·m, and maximum speed reaches 6,000 rpm, making these couplings suitable for a wide range of industrial drive systems.

GY/GYS/GYH Flange Couplings

GY/GYS/GYH Flange Couplings

This series of flange couplings includes three types: GY, GYS, and GYH. The GY type uses fitted-bolt alignment and can be installed or removed without axial movement. The GYS type uses tongue-and-groove alignment, which is easy to machine but requires axial movement. The GYH type features a different design. The couplings are made of 45 steel and have a blackened finish. Optional surface treatments include nickel plating, zinc plating, and phosphating. The bore keyways comply with GB/T 3582-1997, and tapered bores are also available. These couplings transmit high torque and feature a simple, reliable design, making them widely used in mechanical power transmission. Sizes range from GYS to GYH14, with nominal torques of 400–100,000 N·m, speeds of 1,600–8,000 r/min, and bore diameters of 30–250 mm.

GY, GYS and GYH Series Flange Couplings

GY, GYS and GYH Series Flange Couplings

This series of flange couplings includes the GY, GYS and GYH types and is among the most widely used types of fixed rigid couplings. The GY type is aligned using fitted-bolt holes and can be installed or removed without axial movement. The GYS type is aligned by means of tongue-and-groove faces; it is easy to machine, but installation and removal require axial movement. The GYH type has a flange design. These couplings have a simple structure, reliable performance, high torque capacity, and are easy to install and remove. They are made of 45# steel with a blackened surface finish; nickel plating, zinc plating and phosphating are available as options. Shaft bore and keyway configurations comply with GB/T 3582-1997. Tapered bores are also available. Rated torque: 400–100,000 N·m; permissible speed: 1,600–8,000 r/min; shaft bore diameter range: 30–250 mm. Shaft bore lengths are available in Y and J1 types. Sizes include GY5–GY14, GYS5–GYS14 and GYH11–GYH14, among others. Bore interiors are machined to standard H7/H8 tolerances. Custom specifications are available.

GY/GYS/GYH Flange Couplings

GY/GYS/GYH Flange Couplings

GY, GYS, and GYH flange couplings are widely used fixed rigid couplings. They feature a simple design, reliable performance, high torque transmission capacity, and easy assembly and disassembly. Made of 45# steel, they have a blackened finish; nickel plating, zinc plating, and phosphating are available as options. The GY type uses fitted-bolt holes for alignment and requires no axial movement during assembly or disassembly. The GYS type uses a tongue-and-groove fit for alignment, making it easy to machine but requiring axial movement. The GYH type is a variant. Shaft bore keyways comply with GB/T 3582-1997, and tapered bores are also available. Torque range: 400–100,000 N·m; allowable speed: 1,600–8,000 rpm; shaft bore diameter: 30–250 mm. Suitable for a wide range of mechanical drive applications. Custom, non-standard designs are available; please contact our sales team for details.

DTC Torque-Limiting Chain Coupling

DTC Torque-Limiting Chain Coupling

The DTC torque-limiting chain coupling features a friction-based design, offering a degree of vibration damping, cushioning, and compensation to help protect motors and other components. It provides reliable operation, a long service life, and easy installation, removal, and maintenance. It can be used in harsh environments, including damp and dusty conditions. Made of 45# steel, it is available with zinc plating, chrome plating, or phosphating. Supplied with fastening screws, it is suitable for drive systems that require overload protection.

TGL Nylon-Sleeve Crowned-Tooth Gear Coupling

TGL Nylon-Sleeve Crowned-Tooth Gear Coupling

The TGL nylon-sleeve crowned-tooth gear coupling is a double-jointed coupling with curved teeth, widely used in a variety of mechanical and hydraulic applications. Its nylon-and-steel construction requires no maintenance and compensates for axial, radial, and angular misalignment. It features axial insertion for easy assembly and disassembly. Finished bore tolerances comply with ISO H7, and keyway width tolerances comply with DIN 6885/1 J59. Tapered bores and imperial bores are also available. The surface is typically black-oxide treated, and custom specifications are available for special operating conditions. The range includes standard models (such as TGL-14) and extended models (such as TGL-14-L), with a variety of bore diameters and custom options available.

NL Crowned-Tooth Gear Coupling

NL Crowned-Tooth Gear Coupling

The NL crowned-tooth gear coupling is a commonly used medium-torque transmission coupling made of 45 steel with a blackened surface finish (zinc plating and phosphating are available on request). Its simple design makes it easy to maintain. It provides cushioning and vibration damping, and can accommodate relatively large axial displacements as well as small radial and angular displacements. It is suitable for high-speed shafts subject to frequent starts and changes in rotation direction. The range includes 10 sizes, from NL1 to NL10, with nominal torque ratings of 40–220 N·m and compatible motor power of 0.75–180 kW. The bore sizes at both ends can be configured to suit customer requirements. They are machined to standard H7/H8 tolerances, and custom specifications are available.

CL Series Couplings and Magnetic Wheels

CL Series Couplings and Magnetic Wheels

The CL series includes two product categories: crowned gear couplings and orthogonal magnetic couplings (magnetic gears). Crowned gear couplings feature a gear-type design and transmit torque from 370 to 71,000 N·m. They are suitable for speeds of 750–3,000 rpm, with shaft bore diameters ranging from 30 to 180 mm, and comply with the JB/ZQ4218-1986 standard. Magnetic couplings use sintered neodymium-iron-boron magnets for non-contact transmission. They provide gap torque of 0.015–0.65 N·m, have outer diameters of 16–54 mm and inner diameters of 5–30 mm, and reach speeds of up to 500 rpm. Versions rated for temperatures up to 150° are available to order. Both product categories can be custom-made to non-standard specifications.

GICL Crowned Gear Coupling

GICL Crowned Gear Coupling

The GICL crowned gear coupling features a crowned-tooth design that allows for greater angular displacement, improves tooth contact, increases torque transmission capacity, and extends service life. It compensates for radial, axial, and angular shaft misalignment. Its advantages include a compact structure, small turning radius, high load capacity, high transmission efficiency, low noise, and long maintenance intervals, making it particularly suitable for low-speed, heavy-duty applications. The series includes the GICL (crowned-tooth type) and GICL1–GICL94 (standard type). It is made of 45# steel, with a galvanized or phosphated surface finish, and supplied with fastening screws. Depending on the model, rated torque ranges from 0.71 to 4500 kN·m, permissible speed from 460 to 4000 rpm, and bore diameter from 55 to 630 mm.

GICLZ Drum Gear Coupling

GICLZ Drum Gear Coupling

The GICLZ drum gear coupling is a high-performance transmission coupling featuring crowned gear teeth for high load capacity—15–20% greater than that of straight-tooth couplings. Its flared tooth profile makes installation and removal easy, and transmission efficiency reaches 99.7%. Suitable for clockwise and counterclockwise rotation, it accommodates small relative radial displacements and has a compact design with low rotational inertia. The nominal torque range is 0.4–5,000 kN·m. Made of 45 steel, it is available with nickel plating, chrome plating, phosphating, or galvanizing and phosphating. Models range from GICLZ1 to GICLZ30, each with a different rated torque and permissible speed. Bore diameters can be customized to requirements and are machined to H7/H8 tolerances. Widely used to connect drive shafts and driven shafts in industrial machinery.

WG-Type Crowned-Tooth Gear Coupling

WG-Type Crowned-Tooth Gear Coupling

The WG-type standard crowned-tooth gear coupling features a wide internal gear ring, allowing it to compensate for significant shaft misalignment. It is suitable for connecting two horizontally aligned coaxial shafts in a drive system. Its nominal torque range is 800–1,400,000 N·m, and its permissible speed range is 5,300–7,500 rpm. Surface treatments include nickel plating, chrome plating, zinc plating, and phosphating; custom specifications are also available. Accessories typically include fastening screws. The product is available in a range of sizes, including WG1 to WG95. See the product table for specific dimensions and parameters.

WGP Drum Gear Coupling

WGP Drum Gear Coupling

The WGP series drum gear coupling features a crowned-tooth and internal-gear meshing design. The left sleeve has crowned teeth at its end, while the right sleeve has a connecting flange. The brake disc is held between the connecting flange and the coupling sleeve. This series is suitable for connecting drive input and output shafts, compensating for angular misalignment while transmitting torque. The couplings are made of 45# steel and have a blackened surface finish. Available treatments include zinc plating and phosphating. Multiple sizes are available, including WGP1, WGP2, and WGP6, with a wide range of bore diameters; custom specifications are also available. The WGP6 has a nominal torque of 11,200 N·m and a maximum allowable speed of 2,000 rpm.

WGC Vertically Mounted Crowned-Tooth Gear Coupling

WGC Vertically Mounted Crowned-Tooth Gear Coupling

The WGC vertically mounted crowned-tooth gear coupling is designed for two coaxial drive shafts connected by a coupling, transmitting nominal torques of 800–180,000 N·m. To improve lubrication and sealing, reduce the number of parts, and increase operational reliability, a one-piece design integrating the sealing end cover and internal gear ring is particularly recommended. Standard surface treatment is used under normal conditions; custom designs and special materials are available for demanding operating conditions. The series includes six sizes, WGC1 through WGC6, with nominal torques ranging from 800 to 11,200 N·m and allowable speeds of 5,000–7,500 rpm.

WGZ-Type Crowned-Tooth Gear Coupling with Brake Wheel

WGZ-Type Crowned-Tooth Gear Coupling with Brake Wheel

The WGZ-type crowned-tooth gear coupling with brake wheel is designed to connect two horizontal, coaxial transmission shafts and can be used with a shoe brake. Brake wheel diameters range from 160 to 800 mm, and the rated torque transmitted ranges from 800 to 1,800,000 N·m. Featuring crowned teeth, the coupling offers effective lubrication and sealing, fewer components, and high operating reliability. The integral design, in which the sealing end cover and internal gear ring are combined into one unit, is especially recommended. Key parameters include rated torque, allowable speed, shaft bore diameter, and shaft bore length. Custom non-standard bores are available to meet user requirements.

WGT drum-shaped gear coupling with intermediate sleeve

WGT drum-shaped gear coupling with intermediate sleeve

The WGT drum-shaped gear coupling with intermediate sleeve is designed to connect two horizontal, coaxial drive shafts. It has a small tooth clearance, allows only slight relative radial displacement, and features a compact design. Typically, the internal gear ring is connected to the intermediate sleeve, while the external gear sleeves at either end connect to the driven shaft and the prime mover shaft, respectively. To allow the coupling to self-center during operation, the weight of the intermediate sleeve must not exceed 2% of the tangential meshing force at the gear pitch circle, calculated from the nominal torque. For improved lubrication and sealing, an integrated design combining the sealing end cover and internal gear ring is recommended. The product is made of grade 45 steel. Surface treatments include powder coating, galvanizing, or phosphating. Fastening screws are included. Nominal torque range: 800–8,000 N·m; bore diameter: 12–56 mm; bore length: 32–84 mm.

NGCL Drum Gear Coupling

NGCL Drum Gear Coupling

The NGCL drum gear coupling is made of grade 45 steel. Surface treatments are available in nickel, chrome, zinc, or tin plating. Custom designs and special materials are available for demanding operating conditions. The nominal torque range is 400–10,000 N·m, the allowable speed range is 1,900–4,000 rpm, and the shaft bore diameter range is 20–110 mm. Widely used in drive systems, it provides reliable torque transmission and accommodates misalignment.

CLZ Gear Coupling

CLZ Gear Coupling

The CLZ gear coupling is a crowned-tooth coupling that accommodates larger angular misalignment, improves tooth contact conditions, increases torque transmission capacity, and extends service life. Its compact radial dimensions and high load capacity make it suitable for low-speed, heavy-duty applications. It is made of 45 steel with a blackened finish. Zinc plating, phosphating, and PTFE accessories are available as options. The range includes 20 sizes, from CLZ1 to CLZ20, with rated torques from 710 to 1,000,000 N·m and allowable speeds from 300 to 3,780 rpm. Bore diameters can be customized, with keyways, hexagonal bores, square bores, splined bores, and other options available on request.

GCLD Drum-Shaped Gear Coupling

GCLD Drum-Shaped Gear Coupling

The GCLD drum-shaped gear coupling has a smaller tooth pitch than the GICL standard model, allows less relative radial displacement, and features a compact design and low moment of inertia. It is suitable for applications paired with motors. It can rotate in either direction, and either external-tooth sleeve can serve as the input end. The nominal torque range is 1.12 kN·m to 50 kN·m. It is made of 45# steel and is typically blackened; nickel, chrome, zinc, and copper plating are also available. For improved lubrication and sealing, the integrated design with the sealing end cover and internal gear ring formed as one piece is recommended.

LZ Elastic Pin Gear Coupling

LZ Elastic Pin Gear Coupling

The LZ elastic pin gear coupling transmits torque through elastic pins. It consists of two flanged half-couplings and an outer sleeve, with the pins seated in semicircular grooves. Its operating temperature range is -20 to +70°C, and it is not suitable for applications with strict noise requirements. A taper-lock bushing can be used for connection. The material is grade 45 steel; surface treatment is not specified. The nominal torque range is 25,000–2,800,000 N·m, the permissible speed range is 460–2,300 rpm, and multiple shaft-hole lengths are available.

LX Series Elastic Pin Couplings

LX Series Elastic Pin Couplings

LX series elastic pin couplings use nylon elastic elements that offer high strength and wear resistance, making them suitable for corrosive environments. The outer rims of the steel hubs are hardened. The half-couplings and keyways are designed in accordance with GB/T 3852-1997, and the bore types of the two half-couplings can be combined as required. Operating temperature: −20 to +70°C. The previous model designation was the GB 5015-85 series. Material: 45 steel. Surface treatments: nickel plating or phosphating. Supplied with fastening screws. Models include LX, LX1–LX9, and LX10–LX38. Nominal torque: 35,500–180,000 N·m; permitted speed: 950–1,600 r/min; bore diameter: 110–180 mm.

LXZ Elastic Pin Coupling with Brake Wheel

LXZ Elastic Pin Coupling with Brake Wheel

The LXZ elastic pin coupling with brake wheel uses nylon elastic elements offering high strength and wear resistance, making it suitable for corrosive environments. The outer rim of the steel brake wheel is hardened, and the half-couplings and keyways are manufactured in accordance with GB/T 3852-1997. Operating temperature: -20 to +70°C. The original models conform to the GB5015-85 series. Nominal torque range: 45–35,500 N·m; permissible speed range: 1,200–1,080 rpm; bore diameter range: 20–125 mm. Models range from LXZ1 to LXZ15, with optional accessories including keyways (K), hexagonal bores (F), square bores (S), and splined bores (H).

LZJ Intermediate Shaft Elastic Pin Gear Coupling

LZJ Intermediate Shaft Elastic Pin Gear Coupling

The LZJ series intermediate shaft elastic pin gear coupling is made of No. 45 steel and has a blackened surface finish. Zinc plating, phosphating, and other finishes are available. The intermediate shaft length can be specified as required. Mass and moment of inertia are calculated based on the YJ1 bore combination and the minimum bore diameter. Short-term overload must not exceed twice the nominal torque. Custom designs and special materials are available. Various sizes are offered, including LZJ1 and LZJ10–LZJ23, with nominal torque ranging from 112 to 2,800,000 N·m, allowable speed from 490 to 4,500 r/min, and bore diameters from 12 to 260 mm. Suitable for heavy-duty power transmission applications.

LT Series Elastic Pin Coupling

LT Series Elastic Pin Coupling

LT series elastic pin couplings use clearance between the elastic sleeves and the circular holes in the half-coupling flanges, together with sleeve deformation, to provide some compensation for shaft misalignment and vibration damping. Operating temperature: −20°C to +70°C. The bore and keyway types and dimensions comply with GB/T 3852-1997, “Coupling Bore and Connection Types and Dimensions.” Made of 45# steel with a blackened surface finish; galvanized or phosphated accessories are available. Suitable for connecting shafts in a wide range of mechanical drive systems, they effectively absorb vibration and impact.

LZZ Elastic Pin Gear Coupling with Brake Wheel

LZZ Elastic Pin Gear Coupling with Brake Wheel

The LZZ elastic pin gear coupling with brake wheel is a flexible coupling designed for drive systems that require braking control. It uses elastic pins to provide some misalignment compensation and vibration damping. Operating temperature: -20°C to +70°C. The shaft bore keyways comply with GB/T 3852-1997. The nominal torque range is 250–31,500 N·m, the permissible speed range is 950–4,500 r/min, the shaft bore diameter range is 16–125 mm, and the length range is 42–212 mm. Short-term overload must not exceed twice the nominal torque.