Coupling — Page 6

GKM Type
The GKM-type jaw coupling features a double-section design with a three-piece, double-section construction. Its hubs are made of 45# steel, and its elastomer is made of polyurethane. It dampens vibration, reduces noise, and provides zero rotational backlash, making it suitable for forward and reverse rotation. It absorbs vibration, compensates for radial, angular, and axial misalignment, and extends the service life of adjacent components. A wide range of finished bore diameters is available (from 6 mm to 200 mm), with multiple sizes to choose from. Bore tolerances are H7/H8, and custom specifications are available. Product parameters include rated torque, dimensions (DH, E, S, b, LGKM, etc.), and misalignment compensation capacity.

DFG Stainless Steel Spider Coupling Series with Set Screws
DFG stainless steel spider couplings with set screws feature hubs made of SUS304 stainless steel for excellent corrosion resistance. The polyurethane elastomer is wear-resistant, oil-resistant, and electrically insulating. The zero-backlash design is suitable for applications requiring rotation in both directions. It absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy, and set screws secure the coupling. Custom bore sizes are available, with H7/H8 tolerances supported. A range of outer diameters and lengths is available to suit different torque and speed requirements.

DFCG Series Jaw Couplings
DFCG series stainless steel jaw couplings feature hubs made from SUS304 or 316 stainless steel for excellent corrosion resistance. The polyurethane elastomer spider is wear-resistant, oil-resistant, and electrically insulating. It absorbs vibration and compensates for radial, angular, and axial misalignment. Zero rotational backlash makes these couplings suitable for reversing applications. The removable design allows for easy installation, and the hubs are secured with set screws. A range of sizes is available, with outside diameters from 20 mm to 65 mm, lengths from 30 mm to 90 mm, and multiple bore sizes with H7/H8 tolerances. Rated torque: 4.2–164 N·m; permissible eccentricity: 0.02 mm; angular misalignment: 1°; axial misalignment: ±0.60 mm; speed: 6,000–17,000 RPM. Suitable for precision drive systems such as servo and stepper motor applications.

DPG Series Jaw Couplings
DPG Series Jaw Couplings use high-strength polyurethane flexible elements that are wear- and oil-resistant, offer high load capacity, and provide a long service life. Their simple design features compact radial dimensions, low weight, and low moment of inertia, making them suitable for medium- and high-speed applications. They provide substantial axial, radial, and angular misalignment compensation, require no lubrication, and need little maintenance. The split design makes installation and removal easy. Standard surface treatments are generally used; custom designs and special materials are available. These couplings are widely used in metallurgy, mining, petroleum, chemical processing, lifting, transportation, textiles and other light industries, as well as in water pumps and fans.

DFS-45# Steel Jaw-Type Set-Screw Coupling
The DFS-45# steel jaw-type set-screw coupling features 45# steel hubs and a polyurethane elastomer, with zero rotational backlash and suitability for bidirectional rotation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Its detachable design makes installation easy, and it is secured with set screws. The coupling has a simple structure, compact radial dimensions, low weight, and low rotational inertia, making it suitable for medium- to high-speed applications. The elastic element is wear- and oil-resistant, offers high load capacity and a long service life, and requires no lubrication. It is widely used in metallurgy, mining, petroleum, chemicals, lifting, transportation, light industry, textiles, water pumps, fans, and other industries.

DFCS 45 Steel Jaw-Type Clamping Series
DFCS 45 steel jaw-type clamping series couplings feature hubs made from 45 steel and zero backlash, making them suitable for forward and reverse rotation. The polyurethane elastomer offers excellent wear resistance, oil resistance, and electrical insulation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy, and the coupling is secured with clamping screws. Product specifications: Model DFCS-30×40; material: 45 steel; surface finish: blackened; included hardware: cylindrical-head screws. Custom designs and special materials are available on request.

DGFN Type with Brake Disc
The DGFN-type coupling with brake disc belongs to the steel jaw-type clamping coupling series. It features grade 45 steel hubs and a polyurethane elastomer, with zero backlash, making it suitable for reversible drives. The elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Secured with clamping screws, its detachable design makes installation easy. The standard surface finish is black oxide. Custom designs and special materials are available to meet the needs of demanding operating conditions.

GZ-GKM Series Flexible Couplings
The GZ-GKM Series double-flex couplings feature a double-flex design that provides excellent misalignment compensation. They effectively absorb vibrations caused by shaft misalignment and reduce noise. Installation and removal require just four bolts, making them quick and easy. Standard spacers up to 250 mm long are kept in stock for fast delivery. These couplings are ideal for drive applications requiring substantial misalignment compensation and vibration damping, such as protecting adjacent components like bearings and seals and extending their service life. Axial distance, maximum finished bore diameter, and torque capacity vary by model.

CF-CFN Series Flange Couplings
This series comprises flange-type couplings in two models: CF-CFN and DF-DFN. They use a flange connection and are suitable for connecting shafts in transmission systems. Specific technical parameters and specifications are not provided in the catalog.

DF-DFN Series Flange Couplings
The DF-DFN series features a flanged coupling design. It uses a flange connection to join drive shafts.

GDR Intermediate Shaft
The GDR intermediate-shaft coupling is designed to connect shafts that are far apart and includes an intermediate shaft. Its double-joint design provides better misalignment compensation. It can be installed or removed radially without moving the driving or driven equipment. Maintenance is simple when split sleeves are used. The product is made of Grade 45 steel with a blackened finish and comes with set screws. Standard surface treatments are generally used, but custom designs and special materials are available to meet the requirements of demanding operating conditions.

NM Jaw Coupling
The NM series jaw coupling is a flexible coupling consisting of two cast-iron jaw hubs and a natural-rubber spider. Made using precision casting, it offers safe, quiet operation and complies with GB9439. Maximum torque is 125 kg·m. It accommodates shaft diameters of 7–75 mm and motor power up to 60 HP/45 kW. Available in multiple sizes, it has an outer diameter of 50–270 mm, a rated torque range of 1.3–417 kg·m, and an applicable speed range of 4,000–13,500 rpm. A sample part number is “NM50×50×51.5-7×7.” Custom bore options include a keyway (K), hexagonal bore (F), square bore (S), or splined bore (H).

Couplings
This series includes two types: L-type jaw couplings and DGF-type crowned gear couplings. L-type jaw couplings are made of ductile iron, 45# steel, or aluminum alloy, with a black-oxide finish and cylindrical screws. They effectively absorb shock loads, offer excellent oil retention, and require no maintenance. They provide a maximum torque capacity of 54.2 kg·m and allow radial misalignment of 0.3 mm, angular misalignment of 1°, and axial misalignment of +0.5 mm. DGF-type crowned gear couplings are made of 45# steel, with a black-oxide finish and set screws. Their crowned-tooth design provides excellent misalignment compensation. They are easy to install by axial insertion, allow wear to be inspected, and can be used to mount various fans. Finished bore tolerance is H7; keyway width tolerance is DIN 6885/1 JS9. DGF sizes range from 28 to 90, with outside diameters of 65–200 mm, lengths of 90–245 mm, and maximum finished bore diameters of 24–90 mm. Bore options include keyed (K), hexagonal (F), square (S), splined (H), and other custom shapes.

DGF Coupling
The DGF coupling features a crowned-tooth design that absorbs vibration and reduces noise. It offers excellent misalignment compensation, is easy to install by axial insertion, and allows wear to be visually inspected. Suitable for mounting a variety of fans. Finished bore tolerance: H7 per ISO standards; keyway width tolerance: JS9 per DIN 6885/1. Made of 45# steel with a blackened finish; supplied with set screws. Custom specifications are available.

HRC Jaw Coupling
The HRC series is a jaw-type flexible coupling made from high-quality cast iron with a black oxide finish. It is fitted with a highly resilient rubber spider that provides excellent shock absorption and vibration resistance for reliable power transmission. These are standard, general-purpose components with assured quality. Example model code: HRC-23.5×65-10×10, where 23.5 is the outer diameter (mm), 65 is the length (mm), and 10×10 indicates the bore diameters at both ends (mm). A range of sizes is available, with outer diameters from approximately 23.5 mm to 280 mm and corresponding variations in length. Bores can be machined to H7/H8 tolerances, and custom non-standard bore profiles are also available, including keyways, hexagonal, square, and splined bores. Set screws are included as standard. Suitable for general mechanical power transmission, with cushioning and vibration-damping properties.

DGAN Series Flexible Couplings
DGAN couplings with brake drums are designed to work with drum brakes. Made from high-quality cast iron, they feature a rubber elastic sleeve with excellent resilience and strong shock absorption for reliable power transmission. The standard surface finish is black oxide, and custom specifications are available. Sizes range from 38 to 125, with maximum finished bore diameters from 12 mm to 145 mm. A variety of dimensions are available, and bores are machined to standard H7/H8 tolerances. Suitable for shaft-end installation with high rotational inertia. The braking torque must not exceed the coupling's maximum torque. Dimensions can be modified to meet customer requirements.

Couplings with Brake Drum or Brake Disc DGAN/DGSB
This series includes DGAN couplings with brake drums and DGSB couplings with brake discs, designed for use with drum brakes and caliper brakes, respectively. Made from high-quality cast iron or steel with a blackened finish, they offer excellent wear resistance and reliability. Sizes range from 38 to 125, with the maximum finished bore varying by material. Custom specifications are available for every size to meet special operating requirements. The brake drum or brake disc must be installed on the shaft end with the greatest rotational inertia, and the maximum braking torque must not exceed the coupling’s maximum torque.

LM Jaw-Type Flexible Coupling
The LM Series Jaw-Type Flexible Coupling compensates for relative misalignment between two shafts and provides vibration damping and cushioning. It has a simple design, requires no lubrication, offers high load capacity, and is easy to maintain. Replacing the flexible element requires axial movement. It is suitable for coaxial drive shafts operating at medium speeds and transmitting medium torque, particularly where frequent starting and changes in rotation direction occur. It is not suitable for low-speed, heavy-load applications or locations with limited axial space where aligning the shafts after replacing the flexible element is difficult. The operating temperature range is -35°C to +80°C, and the nominal torque range is 16 N·m to 25,000 N·m. The coupling is made of No. 45 steel with a blackened surface finish and comes with set screws. Select a configuration based on the shaft bore diameter and length. The bore is machined to standard H7/H8 tolerances; custom specifications are available.

LM Series Jaw-Type Flexible Couplings
Jaw-type flexible couplings compensate for relative shaft misalignment and provide vibration damping and cushioning. They have a simple, lubrication-free design, high load capacity, and are easy to maintain. Replacing the elastomer requires axial movement. They are suitable for medium-speed, medium-torque drive systems with coaxial shafts, frequent starts, and frequent reversals, as well as components requiring high operational reliability. Operating temperature: -35°C to +80°C. Nominal torque range: 16 N·m to 25,000 N·m. Made of grade 45 steel with a blackened surface finish; supplied with set screws. The series includes models such as LM1, LM8, LM9, LM10, LM13, and LM14. Bore diameters can be freely combined, and keyways, splines, and other features can be added. Custom non-standard designs are available.

LMS Double-Flange Elastic Jaw Coupling
The LMS double-flange elastic jaw coupling has a simple structure, compact radial dimensions, low weight, and low rotational inertia, making it suitable for medium- and high-speed applications. It provides substantial axial, radial, and angular compensation. Its high-strength polyurethane elastic element is wear- and oil-resistant, offers high load capacity, and provides a long service life with safe, reliable operation. No lubrication is required, maintenance is minimal, and the coupling can run continuously for extended periods. The product range includes multiple sizes, from LMS1 to LMS12, with rated torques from 25 to 12,500 N·m, allowable speeds from 1,500 to 8,500 rpm, and bore diameters from 12 to 160 mm. Custom non-standard versions are available on request, including additional accessories such as keyways.

CF High-Elasticity Rubber Coupling
This high-elasticity rubber coupling offers excellent shock and vibration absorption in a compact, easy-to-install, maintenance-free design with a long service life. It can be installed and removed radially, supports high rotational speeds, and provides effective compensation for axial, radial, and angular misalignment. It can be combined with shaft series products to form a high-elasticity drive shaft. Suitable for industrial power transmission systems, including compressors, pumps, generators, transfer cases, test rigs, locomotive drives, wind turbines, air compressors, and marine propulsion systems. Available in a range of sizes, with bore diameters from 8 mm to 16 mm to suit different torque and installation requirements.

R-Type Standard Coupling
The R-Type Standard Coupling is a robust, long-lasting, corrosion-resistant coupling with a high-strength standard nylon housing. Two stainless steel socket-head screws positioned 180° apart prevent relative movement between the housing and elastomer and secure the housing to the elastomer. If the flexible elastomer fails, it is retained to reduce the risk of damage and personal injury. Its compact design allows quick, easy replacement without redesigning the coupling guard. The coupling is made of 45 steel with a blackened finish and is supplied with cylindrical screws. Available in 13 sizes from 2R to 80R, it has a rated torque range of 11–15,000 Nm, an allowable speed range of 1,800–4,500 rpm, and a maximum bore diameter of 22–190 mm. It is suitable for damp and dusty environments and for operating conditions involving shock, vibration, frequent changes in direction, and frequent starts.

LA Series Tire Couplings
Tire couplings are suitable for operating conditions involving moisture, dust, impact, vibration, frequent changes in rotation direction, and frequent starts. They transmit torque ranging from 10 to 20,000 N·m. Made of No. 5 steel with a blackened finish, they feature a compact design and offer durability and reliability. They compensate for axial and angular misalignment, with axial misalignment of D × 2% and D × 1%, and angular misalignment of 3°–6°. Available models include LA and LA1 through LA20, with various torque ratings and bore sizes.

LB-type tire coupling
The LB-type tire coupling is a highly flexible coupling that provides excellent shock absorption and vibration damping, along with superior compensation for axial displacement. It operates at temperatures from -20 to +80°C and transmits torque from 10 to 20,000 N·m. It is suitable for humid, dusty conditions and applications involving impact, vibration, frequent starting, and frequent changes in direction of rotation. Its one-piece tire-shaped elastic element is durable and reliable, and easy to install, remove, and maintain. Flanges are available with Y, J1, or Z1 bore types. Misalignment compensation: axial, D × 1.5%; radial, D × 1%; angular, 25° to 5°. The bores at either end of the coupling can be configured independently in sizes ranging from small to large. Bores are machined to standard H7/H8 tolerances. Dimensions in the table are for reference only; custom specifications are available.

DLP Polygonal Rubber Coupling
The DLP polygonal rubber coupling is a highly flexible coupling with a simple design. It requires no lubrication and is easy to assemble and disassemble. It provides effective vibration damping and cushioning, and compensates for axial, radial, and angular misalignment. It helps reduce torsional vibration and shock loads in drive shaft systems and prevents resonance. Operating temperature: -30 to 60°C. It is suitable for humid, dusty conditions involving impact and vibration, frequent changes in rotation direction, and frequent starts. Widely used in vibrating screens, light industry, construction machinery, mining machinery, and other industries, it transmits torque from 50 to 8,000 N·m. Made of 45# steel with a blackened surface finish, it comes with set screws. Custom non-standard designs and special materials are available. Models range from DLP1 to DLP71 to suit different torque ratings and installation requirements.

GCS01 Split Rigid Coupling
The GCS01 series consists of split rigid couplings made of aluminum alloy with an anodized surface. They offer high torque capacity and high rigidity. Rigid couplings allow virtually no misalignment, so careful alignment is essential during installation. They are secured with clamping screws, and the bores can be machined to H7/H8 tolerances. Custom specifications are available on request. The series includes two base models, GCS01 and GCS02. The GCS01 has an outer diameter of 16 mm, while the GCS02 is available in several sizes, including 20 mm, 25 mm, and 32 mm, to suit different shaft diameters. These couplings are typically used in machinery requiring precise alignment and high-torque transmission.

NGC1.9 Series Gear Coupling
The NGC1.9 gear coupling is made of 45# steel and is available with nickel, chrome, zinc, or tin plating. It has a nominal torque of 16,000 N·m and a maximum permissible speed of 1,500 rpm. Bore diameters range from 80 to 130 mm, with several bore lengths available (60–95 mm). Designed for heavy-duty power transmission, the product can be custom-made to non-standard specifications or from special materials.

SX1 Series Couplings
The SX1 series coupling is an Oldham-type coupling secured with clamping screws, designed for precision transmission systems. It has an outer diameter of 16–63 mm, a length of 18–47 mm, and a bore range of 3–28 mm. Rated torque is 0.7–33 N·m, maximum torque is 1.4–66 N·m, allowable eccentricity is 0.1–4 mm, angular misalignment is 3°, and axial displacement is 0.1 mm. Made from aluminum alloy and stainless steel, it offers low inertia and high rigidity. It is widely used to connect components such as stepper motors, servo motors, and lead screws.

SXC16-50 Series
The SXC16-50 Series is a linear motion component made up of clamping hubs, clamping screws, an intermediate body, and other parts. It may be used in clamping or connecting mechanisms. The page includes a structural diagram but provides few detailed technical specifications.

T10 High-Speed Serpentine Spring Coupling
The T10 series high-speed serpentine spring coupling features a curved tooth profile. Under light loads, the straight sections of the serpentine spring remain almost parallel to the connected shaft axes. As the load increases, the spring deforms further and its contact arc with the teeth grows, increasing stiffness and creating nonlinear variable-stiffness characteristics. The coupling is suitable for operating conditions involving significant torque fluctuations and forward and reverse rotation, and provides effective cushioning. It is made from grade 45 steel and is normally blackened. Nickel plating, zinc plating, and phosphating are available as alternatives. Use the selection procedure to determine the appropriate type and parameters before ordering.

T20 Serpentine Spring Coupling
The T20 serpentine spring coupling is a variable-stiffness flexible coupling that uses a serpentine spring as its elastic element. It provides cushioning, vibration damping, and compensation for shaft misalignment. Its structure consists of inner and outer rings: the inner ring accommodates the straight section of the spring, while the outer ring accommodates its deflected section. As the load increases, the spring deflects further, increasing the arc of contact with the teeth and reducing the distance between contact points. This increases stiffness, resulting in a nonlinear torque transmission relationship. It is suitable for applications involving substantial torque fluctuations and forward-and-reverse rotation. Straight tooth profiles are easier and less expensive to machine, while curved tooth profiles provide better cushioning. The main material is 45# steel. The standard surface finish is black oxide; nickel plating, zinc plating, and phosphating are available as options.

TGC1 Crowned-Tooth Gear Coupling
The TGC1 series crowned-tooth gear coupling features a lightweight design and low moment of inertia, and can accommodate relatively large axial displacement. It is suitable for connecting two horizontal, coaxial drive shafts in medium- and low-load, high-speed applications. It can rotate in either direction, and either external-tooth sleeve can serve as the driving-shaft input end. Product parameters include maximum shaft diameter, nominal torque, ultimate torque, speed, axial compensation, radial compensation, moment of inertia, and weight. Custom bore dimensions are available.