product — Page 101

WSLG65F Fully Enclosed Steel-Supported Cable Carrier
The fully enclosed Steel-Supported Cable Carrier 65 series is designed to protect cables over long distances. Built-in steel support components reinforce the structure, allowing unsupported spans of up to 5 m without sagging. Suitable for cables up to 60 mm in diameter, it has a 71.9 mm pitch and 14 links per meter. The actual installation height is H1 = H + 86.2 mm (load: 2.2 kg/m). Various bend radii (50–200 mm) and internal widths are available; the internal height is fixed at 65 mm. Openings are provided on both sides.

WSLG65Q Series Heavy-Duty Cable Carrier
The steel-reinforced 65 bridge-type cable carrier series is designed for long-distance applications. Integrated steel reinforcement provides added structural support, preventing sag over a 5 m span. It has an inner height of 45 mm, inner widths ranging from 65 to 300 mm, bend radii from 50 to 300 mm, and a pitch of 71.9 mm (14 links per meter). It is suitable for cables up to 60 mm in diameter. Connector models in this series are designated WSLG65Q-45-XXC, where XX denotes the bend radius in millimeters.

WWC.22.40 Cleanroom Cable Carrier
The WWC.22.40 series cleanroom cable carrier is designed for light loads and short travel applications. Its internal compartment system supports horizontal and vertical separators or integrated cable dividers (such as WWC.22.40.FGP and WWC.22.40.PGPLG) to keep cables neatly arranged. Made of TPU, the carrier is available in white, black, and custom colors. It supports speeds of ≤5 m/s and acceleration of ≤3 g, operates at 30±5°C and 45±15% relative humidity, and comes with an 18-month warranty. Its service life is ≥15 million cycles. Antistatic and flame-retardant options are available on request. The matching comb plate, model WWC.22.40.SZB, is used with the connector to prevent cables from tangling or rubbing against one another.

WWC.28.65 Series Cable Carrier
The WWC.28.65 Series cleanroom cable carrier (conduit) is made of TPU, with an inner height of 28 mm and an inner width of 65 mm, and is suitable for cleanroom environments. Operating speed is unspecified; acceleration is ≤3 g. Operating temperature is 30±5°C, and operating relative humidity is 45±15. The warranty is 18 months, and the service life is ≥15 million cycles. It can be fitted with an integrated cable separator (WWC.28.65.FGP) and a heavy-duty support bar (WSLG.02.R70) to divide the interior space for cables. The fixed-end bend radius is available in 60 mm (minimum) or 70 mm (recommended). The connector comes with a comb plate to prevent cables from tangling. Its new patented design prevents separation under tension. Suitable for light-load, short-stroke automation equipment.

WWC.40.110 Series Cable Carrier
The WWC.40.110 series cleanroom cable carrier is designed for light loads and short-stroke applications. It has an internal area of 4,000 mm², with cables and hoses occupying no more than 70% of the interior. Made of TPU, it is available in white, black, and custom colors. Operating speed: ≤? m/s; acceleration: ≤3 g; operating temperature: 30±5°C; relative humidity: 45±15%. It comes with an 18-month warranty and a service life of at least 20 million cycles. Optional accessories include dividers (SZB), connectors (Type C), a keel system (WSLG.03.R70), and an integrated cable separator (GFP). Available bend radii are 100 mm and 130 mm, and the travel length can reach 1,800 mm.

XK22 Low-Noise Cable Carrier
The XK22 series low-noise cable carrier features links made of engineering plastic and operates with low noise. It protects cables and pneumatic hoses in moving applications such as machine tools, automated equipment, and robots. The carrier opens on both sides for easy cable installation, inspection, and maintenance. Key selection parameters include inner and outer height and width, bend radius, pitch, weight, mounting bracket hole spacing, and hole diameter. The specifications table on the same page lists approximate inner widths of 18~75 mm, outer widths of 29~86 mm, pitches of 28.5~85.5 mm, and weights of 0.305~0.552 kg/m, with reference bend radii including R28, R38, and R50. Confirm the specific XK22 dimensions in the row for the relevant model.

XK35 Series Quiet Cable Carrier
The XK series quiet cable carrier is made of engineering plastic and protects cables and pneumatic hoses. It guides and protects cables on reciprocating parts of CNC machine tools, linear modules, robots, and custom automation equipment. Its low-noise design significantly reduces impact noise between links during operation compared with conventional cable carriers. The links open on both sides, allowing cables to be inserted or removed without disconnecting them, simplifying installation and maintenance. Key specifications include inner height B (starting at 18mm), inner width F (available in 18/20/25/30/37/40/50/60/75mm and other sizes), outer height C, outer width E, bending radius R (R28/R38/R50, etc.), pitch P, number of links N, and weight per meter. Mounting holes are provided at the end connectors, with hole spacing varying by XK18/XK22/XK35 specification and a hole diameter on the order of 30mm. Select the inner width and R based on the total cable cross-section and bending radius, and calculate the number of links and installation length based on the travel distance.

XM5S Series Ball Catch
The XM5S Series Ball Catch, also known as a latch, secures two overlapping items together. Made of 316 stainless steel with a mirror-polished finish, it offers excellent corrosion resistance and an attractive appearance. It is suitable for applications requiring quick fastening and release, such as doors, enclosures, and equipment panels.

XR10 Series
XR10 Series linear bearing support units are designed for 10 mm shafts and feature high-precision bearings (model 7000) and a BF10 support end. Available in two widths, 57 and 60, with different mounting hole spacing, they are suitable for precision linear motion systems. The compact design is easy to install and supports multiple coupling interfaces (30-428-5/30-428-4).

XR15 Series Linear Guide Rails
XR15 series linear guide blocks feature a high-precision ball recirculation design and a 15 mm shaft diameter. Multiple mounting sizes are available, including models XR15-57, XR15-60, XR15-80, XR15-86, and XR15-90. The blocks are 66.7–100 mm wide, 98–108 mm long, and 48 mm high, and are equipped with a BF15 support end and a 7002 bearing. They are suitable for linear motion systems in automation equipment, precision drives, industrial robots, and other applications. Their high rigidity, low friction, and smooth operation meet a range of load and travel requirements.

XR20 Series Support Blocks
The XR20 series support block is a support unit for linear guides, with a 20 mm shaft diameter and three width options (80/86/90 mm) to suit different installation spaces. It uses a high-precision 7004 bearing and supports the BF20 fixed end for smooth operation. Key dimensions include an overall length of 131 mm, a width range of 90–100 mm, and a height of 60 mm. Weighing approximately 2.6 kg, it is suitable for precision transmission applications such as automation equipment and machine tools. Its mounting holes are laid out for easy installation. The coupling specifications are 45-55Φ17-19/14/20, accommodating different output shaft requirements.

XR35 Series Linear Guide Support Unit
XR35 series support units are designed for linear drive systems with a 35 mm shaft diameter. The high-rigidity aluminum alloy housing comes fitted with bearings, oil seals, locknuts, and other components to provide stable axial support. The mounting center distance is 130 mm. Available in three versions to suit different applications: standard (XR35-130), B type (XR35-130B), and reduction type (XR35-130 Reduction).

XR40 Series Motor Mount
The XR40 Series Motor Mount is designed for motors with a 40 mm shaft diameter. It features a high-precision 7208 bearing and supports the BF40 support-end model. Three mounting-hole thread sizes are available to suit different motor flanges: M8 (XR40-130), M10 (XR40-150), and M12 (XR40-180). Overall length is 223 mm, height is 110 mm, base height is 60 mm, and weight is approximately 15 kg. Use with a matching coupling from the 65-90 Φ35 series. Its sturdy construction makes it well suited to connecting motors to lead screws or drive shafts in automation equipment.

XSVR01210-01 Series Ball Screw
The XSVR01210-01 series is a precision ball screw with a ball center distance of 12.85 mm, ball diameter of 2.5 mm, lead of 10 mm, 2.7×1 ball circuits, a lead angle of 13.91°, and a right-hand helix. Spring force is 0.1–0.2 kg, preload is 25 kgf, dynamic load Ca is 411 kgf, static load Coa is 638 kgf, and the precision grade is 0.018. The catalog offers five travel lengths: 100/150/250/350/450 mm, with the corresponding nominal model numbers XSVR01210B1DGC5-230-P1, XSVR01210B1DGC5-280-P1, XSVR01210B1DGC5-380-P1, XSVR01210B1DGC5-480-P1, and XSVR01210B1DGC5-580-P1, respectively. Suitable for linear transmission in precision positioning, CNC machine tools, and automation equipment.

XSVR01510-00 Series Ball Screw
The XSVR01510-00 series ball screw has a ball center distance of 15.5 mm, a ball diameter of 3.175 mm, a lead of 10 mm, 2.7 × 1 ball circuits, a lead angle of 11.6°, and a right-hand thread. Spring force is 0.1–0.3 kg, preload is 38 kgf, dynamic load is 611 kgf, static load is 950 kgf, and the precision grade is 0.018. Stroke lengths range from 100 to 800 mm across multiple nominal models. Screw shaft lengths L1, L2, and L3 are specified, and shaft center runout meets requirements. Suitable for precision linear feed applications in automation equipment, machine tools, semiconductor equipment, and other settings.

XSVR01520-01 Series Ball Screw
The XSVR01520-01 series consists of ball screws that use recirculating steel balls for transmission. They are suitable for automation equipment, machine tools, and various linear motion systems. The series features a ball center distance of 15.5 mm, a ball diameter of 3.175 mm, a lead of 20 mm, a lead angle of 22.33°, and a right-hand helix (R). The number of ball turns is 1.8 × 1; the spring force is 0.1–0.3 kg; the preload is 38 kgf; the dynamic load rating Ca is 580 kgf; the static load rating Coa is 875 kgf; and the precision grade is 0.018. Available strokes range from 100 to 800 mm, with different screw shaft lengths. The nominal model designation follows the format XSVR01520A1DGCS-[three digits]-P1, where the three-digit code corresponds to the screw shaft length L3. For example, a 100 mm stroke corresponds to -271-, and an 800 mm stroke corresponds to -971-.

XSVR02010-00 Series Ball Screw
The XSVR02010-00 series ball screw has a nominal ball-center diameter of 21.35 mm, a ball diameter of 3.969 mm, a lead of 10 mm, 2.7 × 1 ball circuits, an 8.48° lead angle, and a right-hand thread. The preload is 43 kgf, the spring force is 0.1–0.3 kg, the dynamic load rating is 977 kgf, the static load rating is 1732 kgf, and the precision rating is 0.018. The stroke range is 200–1000 mm, corresponding to a screw shaft length (L3) of 399–1199 mm and shaft runout of 0.035–0.110 mm. The model is designated in the format XSVR02010B1DGC5-overall length-P1. It is suitable for applications requiring high-precision feed transmission, including CNC equipment and automated machinery.

XSVR02020-00 Series Ball Screw
The XSVR02020-00 series is a right-hand ball screw assembly with a nominal lead of 20 mm, a ball diameter of 3.175 mm, 1.8 × 1 ball turns, and a helix angle of 17.05°. It has a preload of 31 kgf, a dynamic load rating of 649 kgf, a static load rating of 1,134 kgf, and an accuracy of 0.018 mm. Standard strokes range from 200 to 1,000 mm. Corresponding model numbers include XSVR02020A1DGC5-399-P1 and XSVR02020A1DGC5-499-P1. The screw shaft length increases with the stroke, and the shaft runout ranges from 0.035 to 0.110 mm. This series is mainly used in precision transmission and in linear positioning and feed mechanisms in automation equipment.

XSVRO2010 Series Ball Screw
The XSVRO2010 series ball screw linear module features a 20 mm screw diameter, a 10 mm lead, C5 accuracy, and a single-nut design. Multiple stroke lengths are available (200–1000 mm in 100 mm increments), each corresponding to a different screw shaft length. The model code format is XSVRO2010B1DGC5-length-P1, where length is the screw shaft length in mm and corresponds to the stroke as follows: a 200 mm stroke corresponds to a length of 399 mm, a 300 mm stroke to 499 mm, and so on. Suitable for automation equipment, precision positioning, and other applications.

XSVRO2020-00 Precision-Ground Series
The XSVRO2020-00 precision-ground ball screw series features finished shaft ends and delivers high-precision motion. It is suitable for automation equipment requiring precise positioning. Refer to the catalog dimension table for detailed specifications.

XSVRO2020 Precision-Ground Ball Screw with Finished Shaft Ends
The XSVRO2020 is a precision-ground ball screw with shaft ends machined to standard specifications for direct installation. It is suitable for automation equipment, machine tools, precision positioning stages, and other applications requiring high-precision linear motion. Key specifications include accuracy grade, outer diameter, inner diameter, length, pitch, and pitch deviation. As the dimensional data on the catalog page is incomplete, please refer to the full catalog or the manufacturer's technical documentation for the exact outer diameter, inner diameter, length, pitch, and other specifications.

XY2U Aluminum Profile Handle
The XY2U aluminum profile handle is made of 6063 aluminum alloy and is available with a range of finishes, including black sandblasted anodizing, silver sandblasted anodizing, and natural-color anodizing (Y). The series comes in various lengths, such as 27 mm, 50 mm, 66 mm, and custom sizes, with two cross-section sizes: 10 × 7.4 mm and 10 × 4.5 mm. It has M4 mounting holes. Suitable for industrial cabinets, equipment panels, and other applications, it combines an attractive appearance with strength and durability.

XYA66 Series Through-Hole Pull Handle
The XYA66 Series Through-Hole Pull Handle is made of S45C steel with a chrome-plated finish. Its through-hole design is suitable for industrial equipment cabinets, enclosures, and similar applications. It can be securely installed with screws and provides a reliable grip for pulling. Durable and corrosion-resistant.

XYA67 Series Folding Handle
The XYA67 Series Folding Handle is made of SUS304 stainless steel with a mirror-polished finish for an attractive appearance and excellent corrosion resistance. It is secured to the surface with screws. The handle has a flat outer face and a rounded inner grip for easy handling. The screws are concealed by a cover that is difficult to remove, helping prevent tampering. Ideal for cabinets, equipment doors, and other applications requiring an attractive appearance and protection against accidental operation. Available in multiple mounting sizes; reference weight varies by length.

XYAB42 Series, Rounded-Corner, with Cover
The XYAB42 series rounded-corner cable duct with cover is made of PP, PA, or reinforced polyurethane (PUR with an embedded steel core). It is black and comes with two covers. Available in several lengths, including 120 mm, 150 mm, and 180 mm, it is designed to protect and route cables and wires in industrial environments. Its rounded-corner design makes installation easier, while the covers help keep out dust.

XYAB52 Series Rounded Cable Duct with Cover
The XYAB52 Series rounded cable duct with cover is made of PP, PA, or reinforced polyurethane (PUR) with an integrated steel core, and is finished in black. Two covers are included as standard. Available in three standard lengths—120 mm, 150 mm, and 180 mm—it is designed to organize and protect cables in industrial automation equipment. Its compact design is easy to install and offers good electrical insulation and corrosion resistance.

XYAB70 Series
This series includes three models: XYAB70 (PP), XYAB71 (PA), and XYAB72 (reinforced polyurethane PUR with an integrated steel core). All are industrial components; colors and accessories are unspecified.

XYAB71 Series
The XYAB71 Series is made of PA and is suitable for protection and covering applications in automation equipment. PA material options are available in this series, which may include various sizes. See the catalog for details.

XYAB72 Series Reinforced Polyurethane with Embedded Steel Core
The XYAB72 Series comprises industrial components made of reinforced polyurethane (PUR) with an embedded steel core. They offer high strength, wear resistance, and impact resistance, making them suitable for applications requiring flexible protection or support. Compatible accessories, such as covers, are also available.

XYAB76 Series Angled Handles with Covers
The XYAB76 Series angled handles with covers are available in two types: angled and square. The angled type is made of ZDC with a chrome-plated finish and comes with two covers. The square type is made of SUS304 with a mirror-polished finish and comes with white ABS covers. The handle has a flat outer surface and a rounded inner surface for a comfortable grip. The screws are concealed by the covers to prevent tampering. Accessory covers are available in four colors: white, gray, blue, and black.

XYAC29 Series Connectors
The XYAC29 series consists of aluminum alloy connectors available in a range of lengths (80 mm, 100 mm, 125 mm, 160 mm, 200 mm, and 250 mm), with fixed mounting-hole spacing (H = 40 mm, A = 12 mm, B = 8 mm, h = 13 mm, M = 5 mm). Suitable for connecting and positioning industrial aluminum profile frames.

XYAC36 Series
XYAC36 series industrial connecting blocks are available in six standard lengths: 80 mm, 100 mm, 125 mm, 160 mm, 200 mm, and 250 mm. The corresponding mounting hole spacings L1 are 88 mm, 108 mm, 133 mm, 168 mm, 208 mm, and 258 mm. Fixed height H = 40 mm, center distance A = 12 mm, width B = 8 mm, slot depth h = 13 mm, and threaded hole M = 5 mm. Suitable for linear guide systems and precision positioning devices. The material is listed as aluminum alloy (not confirmed); surface treatment is unspecified.

XYAD81/82 Series Snap-In Nylon Handles
The XYAD81/82 series snap-in nylon handles are made of nylon (black or white) and are designed for snap-in installation on doors of varying thicknesses. Available in several sizes, the XYAD81 is 70 mm long, while the XYAD82 is available in lengths of 90, 110, and 140 mm to suit different installation needs. Each model has a cutout size matched to the door thickness for a secure fit. Lightweight yet durable, these handles have an approximate weight of 0.02–0.05 kg and are widely used on industrial cabinets, distribution boxes, and other enclosures.

XYAD91 Series, Automatic Return Type
The XYAD91 Series automatic return door lock is die-cast from ZDC material and features a chrome-plated finish and automatic return function. Suitable for cabinet doors and similar applications, it is easy to install and built to last.

XYAE40 Series Handle with Mounting Plate
The XYAE40 Series features handles with mounting plates. The handles are made of free-cutting steel (SUM22L) with a chrome-plated finish, while the mounting plates are made of zinc alloy (ZDC). These compact handles are easy to install and suitable for industrial cabinets, equipment doors, and similar applications. Their bright chrome finish offers good corrosion resistance. Model XYAE40 is the standard version, providing a secure, reliable grip and easy operation.

XYAE93 Series Right-Angle Handle with Cover
The XYAE93 Series right-angle handle with cover is made of SUS304 stainless steel and features a polished mirror finish for a refined appearance. Its flat outer surface makes it easy to fasten with screws, while the rounded inner side provides a comfortable grip. The handle comes with a white ABS cover that conceals the screws, helps prevent tampering, and is difficult to remove. Cover colors are available in A: white, C: gray, B: blue, and D: black to suit different applications. Suitable for industrial enclosures, equipment doors, and other applications.

XYAG86 Series Bow Handles
The XYAG86 Series Bow Handles include two models: XYAG86 and XYAG87. The XYAG86 is made of ZDC (zinc alloy) with a chrome-plated finish; the XYAG87 is made of 304 stainless steel with a polished finish. Available with various mounting-hole spacings and overall dimensions, they are suitable for machinery, enclosures, furniture, and more. They combine an attractive appearance with durability and easy installation.

XYAG87 Series Bow Handle
The XYAG87 series bow handle is made of 304 stainless steel with a polished finish. Available in two sizes: L1 = 150 mm (overall length 176 mm, thickness 40 mm, height 6.5 mm, weight 0.25 kg) and L1 = 178 mm (overall length 210 mm, width 26 mm, base width 25.4 mm, overall height 50 mm, thickness 44 mm, height 15 mm, M8 thread). Suitable for automation equipment, cabinet doors, and more.

XYAG96 Series Side-Mount Handle
The XYAG96 Series Side-Mount Handle is made of SUS304 stainless steel and features a mirror-polished finish for a bright appearance and excellent corrosion resistance. Suitable for industrial equipment, cabinet doors, and other applications, its side-mount design saves space. Dimensions: 120 mm long and 64 mm high; mounting hole diameter d = 6 mm; countersunk hole diameter d1 = 10.5 mm. Approximate weight per piece: 0.27 kg. Its compact construction offers reliable load-bearing performance.

XYAH46 Series Handles
XYAH46 Series handles are designed for machine tools, large doors, and other industrial equipment. The series includes several types: round-tube (XYAH46), recessed, and round-tube with nuts (XYAH81). Materials include ZDC (zinc alloy) brackets with SUS304 stainless steel tubes, or PA nylon with A6063 aluminum alloy. Finishes include satin chrome plating, brushed, matte black, black anodized, and silver anodized. A range of sizes and mounting options is available for different applications.

XYAH61 Series Internal/External Mount Round Tube Bracket
The XYAH61 Series features internal/external mount round tube brackets. The bracket is made of PA6+GF30, and the tube is made of A6063, with a black finish. Lengths range from 200 to 700 mm in 50 mm increments, with a 150 mm option also available. Mounting hole diameters are available in 8.2 mm and 10 mm to accommodate different tube diameters.

XYAH81 Series Handles
The XYAH81 Series Handles are suitable for machine tools, large doors, and similar applications. The series includes two types: a built-in type and a round-tube type with nuts. They are made of PA (polyamide) and A6063 aluminum alloy, and are available in matte black, black anodized, and silver anodized finishes. Durable and easy to install, these handles meet the needs of a wide range of industrial environments.

XYAJ01 Series
XYAJ01 Series handles are made of SUM22L free-cutting steel and chrome-plated, making them suitable for industrial equipment that requires corrosion resistance and an attractive appearance. This series has a single model with no other variant parameters.

XYAJ51 Series Spring-Return Handle
This series of spring-return handles features a spring mechanism and is suitable for applications requiring automatic closure, such as industrial cabinet doors and equipment panels. The handle has a compact design, with an overall length of 124 mm, a mounting hole spacing of 102 mm, a width of 41 mm, and a load capacity of 100 kg. The mounting hole diameter is 6 mm, and the handle uses M5 screws. Surface finishes are available as options. The body is typically made of carbon steel or stainless steel; see the specifications for each model. The series includes two models, XYAJ51 and XYAJ56, which have identical dimensions and may differ only in details or material.

XYAL21/XYAL22 Series Folding Handles
The XYAL21/XYAL22 series folding handles are detent-type products. The grip folds 180° and, when folded down, stays out of the way. A folding lock feature temporarily holds the handle in its folded position. The handle has a round cross-section for a comfortable, secure grip. It features a black electrophoretic finish. Suitable for industrial equipment, cabinet doors, and other applications where handles need to fold away for storage.

XYAN01 Series Countersunk Hole Pull Handle
The XYAN01 Series Countersunk Hole Pull Handle features a countersunk mounting design, with screws concealed beneath a cover that is difficult to remove to help prevent tampering. Materials and finishes can be customized to suit your requirements (see other models in the same series, such as chrome-plated S45C or mirror-polished SUS304). Suitable for industrial equipment, cabinets, and other applications that call for a clean appearance with concealed screws.

XYAP21 Series Rectangular Handles
The XYAP21 series rectangular handles are made of PC (polycarbonate) and feature a combination of black matte and glossy finishes. Suitable for industrial cabinets, equipment doors, and similar applications, they provide a reliable grip for operation. The series has a clean, attractive rectangular design with an ergonomic shape.

XYAP23 Series Rectangular Handle
The XYAP23 Series Rectangular Handle is made of PC (polycarbonate) and comes in ivory. Suitable for industrial enclosures, equipment panels, and similar applications, it offers an attractive, durable handle solution. Its rectangular design features an ivory finish and is easy to install.