product — Page 104

ZPFS150 Series Gearbox
The ZPFS150 series gearbox is a precision transmission device available in single-stage (L1) and two-stage (L2) configurations. Its reduction ratios range from 6 to 200 and include 6, 8, 10, 14, 20, 30, 40, 50, 60, 70, 80, and 200. Output shaft options include a keyed shaft (S2), a smooth shaft (S1), or a hollow keyed shaft (K). Precision grades are available in standard (P2) and precision (P1). Specifications: maximum input speed of 4,500 rpm; rated input speed of 3,000 rpm; maximum permissible radial load of 3,700 N; maximum permissible axial load of 3,500 N; torsional rigidity of 50 Nm/arcmin; noise level of 68 dB; full-load transmission efficiency of ≥96% for single-stage and ≥92% for two-stage; average service life of 20,000 hours; operating temperature range of -20°C to +80°C; IP65 protection rating; and any mounting orientation. Weight: approximately 23 kg for single-stage and 42 kg for two-stage. Suitable for automation equipment, robots, CNC machine tools, and other applications requiring high-precision, high-torque transmission.

ZPTK110 Series Right-Angle Gearbox
The ZPTK110 series combines a right-angle gearbox with a speed reducer. It has a 1:1 ratio and supports single-shaft or dual-shaft output, with custom configurations available. The rated output torque is not specified (a comparable model is rated at 85 Nm). The average service life is 20,000 hours, and the maximum output torque is twice the rated torque. Transmission efficiency at full load is ≥96%. The rated input speed is 3,000 rpm, and the maximum input speed is 4,500 rpm. The operating temperature range is -20 to +80°C. It uses fully synthetic grease. Standard backlash is ≤12 arcmin, and noise is ≤74 dB. Suitable for automation equipment requiring right-angle power transmission and speed reduction.

ZPTZ110 Series Right-Angle Gearbox
The ZPTZ110 series combines a right-angle gear unit with a 90-degree gearbox and has a 1:1 ratio. It uses fully synthetic grease lubrication, with a rated input speed of 3,000 RPM and a maximum input speed of 4,500 RPM. Transmission efficiency at full load is ≥96%, and average service life is 20,000 hours. Standard backlash is ≤12 arcmin, noise is ≤74 dB, and the operating temperature range is -20 to +80°C. Choose a single- or dual-shaft output, with custom configurations available. Suitable for right-angle power transmission in automation equipment.

ZPTZ90-1 Series
The ZPTZ90-1 series comprises linear motion modules for industrial automation, featuring a fixed cross-sectional size and a range of stroke lengths. The compact design is suitable for applications such as precision positioning and material handling. See the catalog table for specific dimensions.

ZT16 Series
The ZT16 series includes two types: rolling ball-tip models (ZT16A) and toothed-surface screw models (ZT16B/ZT16C). The body is made of S45C, with a black-oxide finish and a hardness of HRC 28–32. The ball is made of SUJ2 and has a hardness of HRC 62. ZT16A is available in various sizes, such as 0408 and 0510, with different pitches and lengths. Maximum loads range from 2 to 235 kN, and weights range from 0.6 to 235 g. An example order code is ZT16A-0408. The toothed-surface screw series also includes the ZT20 model, made of SCM435 with a black-oxide finish and a hardness of HRC 32–38. The series is suitable for linear transmission in automated equipment.

ZT45 Support Foot Series
This series features ZT45 support feet made of S45C steel with a black oxide finish and a hardness of HRC 28–32. Multiple sizes are available, with thread sizes from M6 to M20 and lengths from 10 to 60 mm. Model numbers consist of “ZT45” followed by a four-digit suffix (e.g., ZT45-0610); the first two digits indicate the thread size and length combination. These feet provide mounting support in automation equipment.

ZT46 Serrated Screw Support Foot Series
This series of serrated end feet is designed for linear drives in automation equipment. The body is made of S45C steel, with a black-oxide surface finish and a hardness of HRC 28–32. A range of thread diameters from M6 to M20 is available, with lengths from 10 mm to 60 mm. Order using model number ZT46-XXXX; for example, ZT46-0610 indicates an M6 thread and a length of 10 mm.

ZT49 Series Support Blocks
ZT49 series guide shaft supports are made from S45C carbon steel with a black-oxide finish and a hardness of HRC 35. Designed to support guide shafts, they are available in a range of sizes. Length (B) ranges from 25 mm to 100 mm, while width (C) is fixed at 25 mm. Bore diameter (D) varies by series, including 4.8 mm, 7.6 mm, 9.9 mm, and 12.7 mm; mounting hole spacing (E), height (F), and slot width (G) also vary accordingly. Thread sizes include M6×1, M10×1.5, and M16×2.0. Weights range from 40 g to 275 g. An example order code is ZT49-06258. These supports are widely used in automation equipment and mechanical transmission systems.

ZT55A Series Plungers
The ZT55A series comprises press-fit spring plungers. The body is made of anodized aluminum, the pin is made of zinc-plated S45C steel hardened to HRC 45, and the spring is made of SWP-B spring steel. The series is available in two designs: without a seal (ZT55A) and with a seal (ZT55B). Please specify the complete model number when ordering, such as ZT55A-0603-010. Suitable for positioning, ejection, and other mechanical automation applications.

ZX-55/80 Series Cantilever Components
The ZX-55/80 series is a range of accessories for cantilever systems used in industrial automation equipment. It includes a rotatable enclosure support (QX-50/68-M), an enclosure connector (ZX-55/80-A), a 90° enclosure connector (ZX-55/80-B), a right-angle adapter (ZX-55/80-C), and a top mount (ZX-55/80-D). All components are made of die-cast aluminum alloy and rotate through 0–320°. Locking handles allow them to be secured at various angles. Compatible with the lightweight 50/68 and 55/80 sizes, the components weigh between 1.1 kg and 5.1 kg to suit different load requirements.

ZX-70/100 Series Heavy-Duty Cantilever Components
The ZX-70/100 Series Heavy-Duty Cantilever Components are made of die-cast aluminum alloy and include a range of parts, such as enclosure connectors, 90-degree elbows, horizontal wall mounts, intermediate connectors, vertical wall mounts, and rotatable bases. All components offer a rotation range of 0–320° and are equipped with locking handles for flexible positioning and secure locking. This series is suitable for heavy-duty cantilever support systems used in industrial automation production lines, machine tools, robots, and similar applications, providing stable structural connections and load-bearing capacity. Component weights range from 1.3 kg to 4.1 kg to meet different installation requirements.

ZX-70/100 Cantilever Assembly
The ZX-70/100 series heavy-duty cantilever assembly is designed for support and adjustment in industrial automation equipment. It includes a 90-degree swivel joint, a fixed base, and a connecting tube. The joint rotates from 0 to 320 degrees and features a locking handle for easy positioning. Made of die-cast aluminum alloy, it is lightweight yet strong. The connecting tube has an insertion depth of 25 mm. Flexible mounting options allow installation on either the left or right side.

ZZ90-1 Series
The ZZ90-1 Series is a linear guide or slide unit available in various lengths (such as L1 to L237). Each length designation corresponds to a value of 95 mm. The series may be used to support linear motion in automation equipment. Specific technical parameters and coding rules are not clearly provided on the supplied page.

ZZL90 Series Right-Angle Gearbox
The ZZL90 series is a high-precision, high-efficiency gearbox with a right-angle output. The series includes a range of models, including the ZZL90, ZK110, ZPTZ110, ZPTK110, and AGV, to meet different gear ratio and output configuration requirements. Lubricated with fully synthetic grease, these products offer low noise, long service life, and high reliability. Rated output torque ranges from 42 Nm to 85 Nm, transmission efficiency is ≥96%, and standard backlash is ≤7 arcmin or ≤12 arcmin. They are suitable for applications requiring right-angle power transmission, including industrial automation, robotics, and machine tools.