product — Page 22

DXC Series Rigid Couplings

DXC Series Rigid Couplings

The DXC series features one-piece metal diaphragm couplings made with a high-strength aluminum alloy body and anodized finish. They offer zero backlash and high rigidity, making them suitable for precision power transmission. As they cannot compensate for misalignment, careful alignment is required during installation. A range of sizes is available, with shaft diameters from 4 mm to 35 mm, outer diameters from 16 mm to 95 mm, and lengths from 16 mm to 126 mm. Rated torque ranges from 10 N·m to 220 N·m, maximum torque from 20 N·m to 440 N·m, and maximum speed from 7,500 to 19,000 rpm.

DXCG Series One-Piece Metal Rigid Couplings

DXCG Series One-Piece Metal Rigid Couplings

The DXCG Series features one-piece metal rigid couplings made from No. 45 steel or stainless steel. With zero backlash and high rigidity, they transmit power and motion without loss, making them suitable for applications requiring precise alignment. The series includes two subseries: the standard DXCG and the stainless steel clamp-type DXCG-S. A variety of cross-sectional sizes are available in square and rectangular shapes. Surface finishes include black oxide, nickel plating, zinc plating, and phosphating. Rated torque ranges from 18 to 300 N·m, and maximum speed reaches 6,000 rpm, making these couplings suitable for a wide range of industrial drive systems.

DP Series

DP Series

DP Series clamping carts are designed primarily for workshop areas. Their highly stable steel construction makes them ideal for sales displays and tooling racks. With a compact footprint of just 60 × 90 cm, they are available in two sizes: DP1 (800 × 575 × 1560 mm) and DP2 (600 × 575 × 1400 mm). Both models are fitted with 75 × 32 mm castors. They weigh 39 kg and 35 kg respectively, and are packed one per carton.

GY/GYS/GYH Flange Couplings

GY/GYS/GYH Flange Couplings

This series of flange couplings includes three types: GY, GYS, and GYH. The GY type uses fitted-bolt alignment and can be installed or removed without axial movement. The GYS type uses tongue-and-groove alignment, which is easy to machine but requires axial movement. The GYH type features a different design. The couplings are made of 45 steel and have a blackened finish. Optional surface treatments include nickel plating, zinc plating, and phosphating. The bore keyways comply with GB/T 3582-1997, and tapered bores are also available. These couplings transmit high torque and feature a simple, reliable design, making them widely used in mechanical power transmission. Sizes range from GYS to GYH14, with nominal torques of 400–100,000 N·m, speeds of 1,600–8,000 r/min, and bore diameters of 30–250 mm.

GY, GYS and GYH Series Flange Couplings

GY, GYS and GYH Series Flange Couplings

This series of flange couplings includes the GY, GYS and GYH types and is among the most widely used types of fixed rigid couplings. The GY type is aligned using fitted-bolt holes and can be installed or removed without axial movement. The GYS type is aligned by means of tongue-and-groove faces; it is easy to machine, but installation and removal require axial movement. The GYH type has a flange design. These couplings have a simple structure, reliable performance, high torque capacity, and are easy to install and remove. They are made of 45# steel with a blackened surface finish; nickel plating, zinc plating and phosphating are available as options. Shaft bore and keyway configurations comply with GB/T 3582-1997. Tapered bores are also available. Rated torque: 400–100,000 N·m; permissible speed: 1,600–8,000 r/min; shaft bore diameter range: 30–250 mm. Shaft bore lengths are available in Y and J1 types. Sizes include GY5–GY14, GYS5–GYS14 and GYH11–GYH14, among others. Bore interiors are machined to standard H7/H8 tolerances. Custom specifications are available.

GY/GYS/GYH Flange Couplings

GY/GYS/GYH Flange Couplings

GY, GYS, and GYH flange couplings are widely used fixed rigid couplings. They feature a simple design, reliable performance, high torque transmission capacity, and easy assembly and disassembly. Made of 45# steel, they have a blackened finish; nickel plating, zinc plating, and phosphating are available as options. The GY type uses fitted-bolt holes for alignment and requires no axial movement during assembly or disassembly. The GYS type uses a tongue-and-groove fit for alignment, making it easy to machine but requiring axial movement. The GYH type is a variant. Shaft bore keyways comply with GB/T 3582-1997, and tapered bores are also available. Torque range: 400–100,000 N·m; allowable speed: 1,600–8,000 rpm; shaft bore diameter: 30–250 mm. Suitable for a wide range of mechanical drive applications. Custom, non-standard designs are available; please contact our sales team for details.

DTC Torque-Limiting Chain Coupling

DTC Torque-Limiting Chain Coupling

The DTC torque-limiting chain coupling features a friction-based design, offering a degree of vibration damping, cushioning, and compensation to help protect motors and other components. It provides reliable operation, a long service life, and easy installation, removal, and maintenance. It can be used in harsh environments, including damp and dusty conditions. Made of 45# steel, it is available with zinc plating, chrome plating, or phosphating. Supplied with fastening screws, it is suitable for drive systems that require overload protection.

TGL Nylon-Sleeve Crowned-Tooth Gear Coupling

TGL Nylon-Sleeve Crowned-Tooth Gear Coupling

The TGL nylon-sleeve crowned-tooth gear coupling is a double-jointed coupling with curved teeth, widely used in a variety of mechanical and hydraulic applications. Its nylon-and-steel construction requires no maintenance and compensates for axial, radial, and angular misalignment. It features axial insertion for easy assembly and disassembly. Finished bore tolerances comply with ISO H7, and keyway width tolerances comply with DIN 6885/1 J59. Tapered bores and imperial bores are also available. The surface is typically black-oxide treated, and custom specifications are available for special operating conditions. The range includes standard models (such as TGL-14) and extended models (such as TGL-14-L), with a variety of bore diameters and custom options available.

NL Crowned-Tooth Gear Coupling

NL Crowned-Tooth Gear Coupling

The NL crowned-tooth gear coupling is a commonly used medium-torque transmission coupling made of 45 steel with a blackened surface finish (zinc plating and phosphating are available on request). Its simple design makes it easy to maintain. It provides cushioning and vibration damping, and can accommodate relatively large axial displacements as well as small radial and angular displacements. It is suitable for high-speed shafts subject to frequent starts and changes in rotation direction. The range includes 10 sizes, from NL1 to NL10, with nominal torque ratings of 40–220 N·m and compatible motor power of 0.75–180 kW. The bore sizes at both ends can be configured to suit customer requirements. They are machined to standard H7/H8 tolerances, and custom specifications are available.

CL Series Couplings and Magnetic Wheels

CL Series Couplings and Magnetic Wheels

The CL series includes two product categories: crowned gear couplings and orthogonal magnetic couplings (magnetic gears). Crowned gear couplings feature a gear-type design and transmit torque from 370 to 71,000 N·m. They are suitable for speeds of 750–3,000 rpm, with shaft bore diameters ranging from 30 to 180 mm, and comply with the JB/ZQ4218-1986 standard. Magnetic couplings use sintered neodymium-iron-boron magnets for non-contact transmission. They provide gap torque of 0.015–0.65 N·m, have outer diameters of 16–54 mm and inner diameters of 5–30 mm, and reach speeds of up to 500 rpm. Versions rated for temperatures up to 150° are available to order. Both product categories can be custom-made to non-standard specifications.

GICL Crowned Gear Coupling

GICL Crowned Gear Coupling

The GICL crowned gear coupling features a crowned-tooth design that allows for greater angular displacement, improves tooth contact, increases torque transmission capacity, and extends service life. It compensates for radial, axial, and angular shaft misalignment. Its advantages include a compact structure, small turning radius, high load capacity, high transmission efficiency, low noise, and long maintenance intervals, making it particularly suitable for low-speed, heavy-duty applications. The series includes the GICL (crowned-tooth type) and GICL1–GICL94 (standard type). It is made of 45# steel, with a galvanized or phosphated surface finish, and supplied with fastening screws. Depending on the model, rated torque ranges from 0.71 to 4500 kN·m, permissible speed from 460 to 4000 rpm, and bore diameter from 55 to 630 mm.

GICLZ Drum Gear Coupling

GICLZ Drum Gear Coupling

The GICLZ drum gear coupling is a high-performance transmission coupling featuring crowned gear teeth for high load capacity—15–20% greater than that of straight-tooth couplings. Its flared tooth profile makes installation and removal easy, and transmission efficiency reaches 99.7%. Suitable for clockwise and counterclockwise rotation, it accommodates small relative radial displacements and has a compact design with low rotational inertia. The nominal torque range is 0.4–5,000 kN·m. Made of 45 steel, it is available with nickel plating, chrome plating, phosphating, or galvanizing and phosphating. Models range from GICLZ1 to GICLZ30, each with a different rated torque and permissible speed. Bore diameters can be customized to requirements and are machined to H7/H8 tolerances. Widely used to connect drive shafts and driven shafts in industrial machinery.

Rubber-Handle F-Clamp

Rubber-Handle F-Clamp

This rubber-handle F-clamp series features plastic jaw pads, a comfortable PVC grip, chrome plating, and quick adjustment. The rail measures 15.5 × 7.5 mm, with a clamping force of 250 kg and lengths ranging from 160 to 1,200 mm. Suitable for a variety of clamping applications, it is available in multiple sizes to meet different tooling requirements.

WG-Type Crowned-Tooth Gear Coupling

WG-Type Crowned-Tooth Gear Coupling

The WG-type standard crowned-tooth gear coupling features a wide internal gear ring, allowing it to compensate for significant shaft misalignment. It is suitable for connecting two horizontally aligned coaxial shafts in a drive system. Its nominal torque range is 800–1,400,000 N·m, and its permissible speed range is 5,300–7,500 rpm. Surface treatments include nickel plating, chrome plating, zinc plating, and phosphating; custom specifications are also available. Accessories typically include fastening screws. The product is available in a range of sizes, including WG1 to WG95. See the product table for specific dimensions and parameters.

WGP Drum Gear Coupling

WGP Drum Gear Coupling

The WGP series drum gear coupling features a crowned-tooth and internal-gear meshing design. The left sleeve has crowned teeth at its end, while the right sleeve has a connecting flange. The brake disc is held between the connecting flange and the coupling sleeve. This series is suitable for connecting drive input and output shafts, compensating for angular misalignment while transmitting torque. The couplings are made of 45# steel and have a blackened surface finish. Available treatments include zinc plating and phosphating. Multiple sizes are available, including WGP1, WGP2, and WGP6, with a wide range of bore diameters; custom specifications are also available. The WGP6 has a nominal torque of 11,200 N·m and a maximum allowable speed of 2,000 rpm.

WGC Vertically Mounted Crowned-Tooth Gear Coupling

WGC Vertically Mounted Crowned-Tooth Gear Coupling

The WGC vertically mounted crowned-tooth gear coupling is designed for two coaxial drive shafts connected by a coupling, transmitting nominal torques of 800–180,000 N·m. To improve lubrication and sealing, reduce the number of parts, and increase operational reliability, a one-piece design integrating the sealing end cover and internal gear ring is particularly recommended. Standard surface treatment is used under normal conditions; custom designs and special materials are available for demanding operating conditions. The series includes six sizes, WGC1 through WGC6, with nominal torques ranging from 800 to 11,200 N·m and allowable speeds of 5,000–7,500 rpm.

WGZ-Type Crowned-Tooth Gear Coupling with Brake Wheel

WGZ-Type Crowned-Tooth Gear Coupling with Brake Wheel

The WGZ-type crowned-tooth gear coupling with brake wheel is designed to connect two horizontal, coaxial transmission shafts and can be used with a shoe brake. Brake wheel diameters range from 160 to 800 mm, and the rated torque transmitted ranges from 800 to 1,800,000 N·m. Featuring crowned teeth, the coupling offers effective lubrication and sealing, fewer components, and high operating reliability. The integral design, in which the sealing end cover and internal gear ring are combined into one unit, is especially recommended. Key parameters include rated torque, allowable speed, shaft bore diameter, and shaft bore length. Custom non-standard bores are available to meet user requirements.

WGT drum-shaped gear coupling with intermediate sleeve

WGT drum-shaped gear coupling with intermediate sleeve

The WGT drum-shaped gear coupling with intermediate sleeve is designed to connect two horizontal, coaxial drive shafts. It has a small tooth clearance, allows only slight relative radial displacement, and features a compact design. Typically, the internal gear ring is connected to the intermediate sleeve, while the external gear sleeves at either end connect to the driven shaft and the prime mover shaft, respectively. To allow the coupling to self-center during operation, the weight of the intermediate sleeve must not exceed 2% of the tangential meshing force at the gear pitch circle, calculated from the nominal torque. For improved lubrication and sealing, an integrated design combining the sealing end cover and internal gear ring is recommended. The product is made of grade 45 steel. Surface treatments include powder coating, galvanizing, or phosphating. Fastening screws are included. Nominal torque range: 800–8,000 N·m; bore diameter: 12–56 mm; bore length: 32–84 mm.

NGCL Drum Gear Coupling

NGCL Drum Gear Coupling

The NGCL drum gear coupling is made of grade 45 steel. Surface treatments are available in nickel, chrome, zinc, or tin plating. Custom designs and special materials are available for demanding operating conditions. The nominal torque range is 400–10,000 N·m, the allowable speed range is 1,900–4,000 rpm, and the shaft bore diameter range is 20–110 mm. Widely used in drive systems, it provides reliable torque transmission and accommodates misalignment.

CLZ Gear Coupling

CLZ Gear Coupling

The CLZ gear coupling is a crowned-tooth coupling that accommodates larger angular misalignment, improves tooth contact conditions, increases torque transmission capacity, and extends service life. Its compact radial dimensions and high load capacity make it suitable for low-speed, heavy-duty applications. It is made of 45 steel with a blackened finish. Zinc plating, phosphating, and PTFE accessories are available as options. The range includes 20 sizes, from CLZ1 to CLZ20, with rated torques from 710 to 1,000,000 N·m and allowable speeds from 300 to 3,780 rpm. Bore diameters can be customized, with keyways, hexagonal bores, square bores, splined bores, and other options available on request.

GCLD Drum-Shaped Gear Coupling

GCLD Drum-Shaped Gear Coupling

The GCLD drum-shaped gear coupling has a smaller tooth pitch than the GICL standard model, allows less relative radial displacement, and features a compact design and low moment of inertia. It is suitable for applications paired with motors. It can rotate in either direction, and either external-tooth sleeve can serve as the input end. The nominal torque range is 1.12 kN·m to 50 kN·m. It is made of 45# steel and is typically blackened; nickel, chrome, zinc, and copper plating are also available. For improved lubrication and sealing, the integrated design with the sealing end cover and internal gear ring formed as one piece is recommended.

LZ Elastic Pin Gear Coupling

LZ Elastic Pin Gear Coupling

The LZ elastic pin gear coupling transmits torque through elastic pins. It consists of two flanged half-couplings and an outer sleeve, with the pins seated in semicircular grooves. Its operating temperature range is -20 to +70°C, and it is not suitable for applications with strict noise requirements. A taper-lock bushing can be used for connection. The material is grade 45 steel; surface treatment is not specified. The nominal torque range is 25,000–2,800,000 N·m, the permissible speed range is 460–2,300 rpm, and multiple shaft-hole lengths are available.

Removable-pad F-clamp

Removable-pad F-clamp

The removable-pad F-clamp is a heavy-duty F-clamp with a removable pad, designed for applications requiring high clamping force. It has a 42.1 × 19.1 mm rail and delivers up to 2,200 kg of clamping force. Available in several opening lengths: 300 mm, 400 mm, 500 mm, and 600 mm, with corresponding L × H dimensions of 300 × 180, 400 × 180, 500 × 180, and 600 × 180 mm. The clamp features a chrome-plated finish and a comfortable PVC handle for quick adjustment. Suitable for woodworking, metalworking, and other tasks requiring sustained clamping.

LX Series Elastic Pin Couplings

LX Series Elastic Pin Couplings

LX series elastic pin couplings use nylon elastic elements that offer high strength and wear resistance, making them suitable for corrosive environments. The outer rims of the steel hubs are hardened. The half-couplings and keyways are designed in accordance with GB/T 3852-1997, and the bore types of the two half-couplings can be combined as required. Operating temperature: −20 to +70°C. The previous model designation was the GB 5015-85 series. Material: 45 steel. Surface treatments: nickel plating or phosphating. Supplied with fastening screws. Models include LX, LX1–LX9, and LX10–LX38. Nominal torque: 35,500–180,000 N·m; permitted speed: 950–1,600 r/min; bore diameter: 110–180 mm.

LXZ Elastic Pin Coupling with Brake Wheel

LXZ Elastic Pin Coupling with Brake Wheel

The LXZ elastic pin coupling with brake wheel uses nylon elastic elements offering high strength and wear resistance, making it suitable for corrosive environments. The outer rim of the steel brake wheel is hardened, and the half-couplings and keyways are manufactured in accordance with GB/T 3852-1997. Operating temperature: -20 to +70°C. The original models conform to the GB5015-85 series. Nominal torque range: 45–35,500 N·m; permissible speed range: 1,200–1,080 rpm; bore diameter range: 20–125 mm. Models range from LXZ1 to LXZ15, with optional accessories including keyways (K), hexagonal bores (F), square bores (S), and splined bores (H).

LZJ Intermediate Shaft Elastic Pin Gear Coupling

LZJ Intermediate Shaft Elastic Pin Gear Coupling

The LZJ series intermediate shaft elastic pin gear coupling is made of No. 45 steel and has a blackened surface finish. Zinc plating, phosphating, and other finishes are available. The intermediate shaft length can be specified as required. Mass and moment of inertia are calculated based on the YJ1 bore combination and the minimum bore diameter. Short-term overload must not exceed twice the nominal torque. Custom designs and special materials are available. Various sizes are offered, including LZJ1 and LZJ10–LZJ23, with nominal torque ranging from 112 to 2,800,000 N·m, allowable speed from 490 to 4,500 r/min, and bore diameters from 12 to 260 mm. Suitable for heavy-duty power transmission applications.

LT Series Elastic Pin Coupling

LT Series Elastic Pin Coupling

LT series elastic pin couplings use clearance between the elastic sleeves and the circular holes in the half-coupling flanges, together with sleeve deformation, to provide some compensation for shaft misalignment and vibration damping. Operating temperature: −20°C to +70°C. The bore and keyway types and dimensions comply with GB/T 3852-1997, “Coupling Bore and Connection Types and Dimensions.” Made of 45# steel with a blackened surface finish; galvanized or phosphated accessories are available. Suitable for connecting shafts in a wide range of mechanical drive systems, they effectively absorb vibration and impact.

LZZ Elastic Pin Gear Coupling with Brake Wheel

LZZ Elastic Pin Gear Coupling with Brake Wheel

The LZZ elastic pin gear coupling with brake wheel is a flexible coupling designed for drive systems that require braking control. It uses elastic pins to provide some misalignment compensation and vibration damping. Operating temperature: -20°C to +70°C. The shaft bore keyways comply with GB/T 3852-1997. The nominal torque range is 250–31,500 N·m, the permissible speed range is 950–4,500 r/min, the shaft bore diameter range is 16–125 mm, and the length range is 42–212 mm. Short-term overload must not exceed twice the nominal torque.

LTZ Elastic Sleeve Pin Coupling with Brake Wheel

LTZ Elastic Sleeve Pin Coupling with Brake Wheel

The LTZ elastic sleeve pin coupling with brake wheel features an integral construction in which the brake wheel and half-coupling are made as one piece. The brake-wheel half-coupling is made from cast or forged steel, with its outer cylindrical surface hardened. The keyway types and dimensions for the shaft bore are designated in the same way as for the LT type. It is made of No. 45 steel and is zinc-plated or phosphated. An example model designation is LTZ5-130×25×44-25×44. It is suitable for transmission systems requiring a braking function.

FCL Elastic Pin Coupling

FCL Elastic Pin Coupling

The FCL-type elastic pin coupling has a simple design, is easy to install and replace, and is compact and lightweight, making it a popular choice. When the relative displacement between the two shafts is kept within the permitted range after installation and adjustment, the coupling delivers reliable performance and a long service life. It is suitable for various low- to medium-power drive shafts with moderate loads and motor-driven operation, including those used in gear reducers, cranes, compressors, conveyors, textile machinery, hoists, and ball mills. Made from 45# steel, it is available with a black oxide, zinc-plated, or phosphated finish. Models range from FCL90 to FCL630, with a range of torque ratings, speeds, and outside diameters. Bore machining to H7/H8 tolerances is available, as is custom manufacturing to non-standard specifications.

MH-Type Core Elastic Coupling

MH-Type Core Elastic Coupling

The MH-type core elastic coupling is a flexible coupling with a certain degree of misalignment compensation. It is suitable for operating conditions where the two shaft centerlines are slightly offset, and provides cushioning and vibration-damping performance. The coupling requires no lubrication and can operate in dusty or damp environments. Its simple design makes maintenance easy; however, replacing the elastic element requires moving one half-coupling and the main shaft. The operating temperature range is -20 to +70°C, and the rated torque it transmits is 6.3 to 8,000 N·m.

JSJ Serpentine Spring Coupling

JSJ Serpentine Spring Coupling

The JSJ intermediate-shaft serpentine spring coupling uses a trapezoidal-section spring grid meshing with trapezoidal grooves to absorb shock and vibration. Its cast-aluminum housing protects the spring and retains grease for effective lubrication and noise reduction. It is suitable for applications with a large distance between the two shafts; an intermediate connecting rod enables long-distance connections. It transmits nominal torques from 140 to 160,000 N·m, with bore diameters ranging from 22 mm to 360 mm. Its simple design makes maintenance easy, and it requires no lubrication.

JS Series Serpentine Spring Coupling

JS Series Serpentine Spring Coupling

The JS Series Serpentine Spring Coupling is a metal elastic coupling with variable stiffness. Torque is transmitted by a serpentine spring strip fitted into the grooves of the two coupling halves. It features an advanced design, excellent vibration damping, and a long service life. The JS1 is the basic model, with a rated torque of 0.045 kN·m, a maximum speed of 4,500 r/min, compatible bore diameters of 18–22 mm, and bore lengths of 45–70 mm. The JSB is an axial-installation model with a housing. It has a simple, compact design and is easy to assemble and disassemble. It is made of Grade 45 steel, with a blackened surface finish; accessories are zinc-phosphated. The operating temperature range is 30°C to 150°C.

JSB Serpentine Spring Coupling

JSB Serpentine Spring Coupling

The JSB serpentine spring coupling is a flexible coupling with an axially mounted cover. Torque is transmitted by a serpentine spring strip fitted into the tooth grooves of the two coupling halves. Its design is simple, making it easy to assemble and disassemble. It has few components, a compact size, and a low weight. The axially mounted cover allows for higher operating speeds. The coupling features low noise, excellent vibration damping, a long service life, and tolerance for relatively large installation misalignment. Operating temperature: -30°C to 150°C. Made of 45# steel with a black-oxide finish; accessories are zinc-plated and phosphated. It is widely used in drive systems that require vibration damping and misalignment compensation.

JSD Single-Flange Serpentine Spring Coupling

JSD Single-Flange Serpentine Spring Coupling

The JSD single-flange serpentine spring coupling uses a serpentine spring as its elastic element, offering high elasticity and high torque transmission. It is widely used in heavy-duty and general-purpose machinery. Specially processed serpentine springs provide a long service life, allow high operating speeds, and compensate effectively for axial, radial, and angular misalignment. Transmission efficiency reaches 99.47%, and the coupling can withstand short-term overloads of up to twice its rated torque. Its simple design makes installation and disassembly easy, while its excellent vibration damping helps prevent resonance. The product is made of 45# steel with a blackened surface; zinc-plated or phosphated accessories are available. Bore diameters range from 80 mm to 260 mm, nominal torque from 5,600 N·m to 160,000 N·m, and allowable speed from 900 rpm to 2,440 rpm. Custom specifications are available, with bores machined to H7/H8 tolerances.

JSS Serpentine Spring Coupling

JSS Serpentine Spring Coupling

The JSS serpentine spring coupling is a double-flange coupling made of 45# steel, with a galvanized or phosphated surface finish and equipped with fastening screws. It offers excellent vibration damping, a long service life, a wide range of variable-load capacity, safe starting, high transmission efficiency, reliable operation, low noise, good lubrication, a simple design, easy assembly and disassembly, and tolerance for relatively large installation misalignment. Custom designs to non-standard specifications and special materials are available to meet demanding operating conditions.

GL-Type Roller Chain Coupling

GL-Type Roller Chain Coupling

The GL-type roller chain coupling is a mechanical power transmission coupling that uses a double-strand roller chain. It complies with the GB1243.1-83 standard and features a simple design for easy installation and removal. It is suitable for medium- and low-speed applications with moderate loads, and can compensate for radial, axial, and angular misalignment. Shaft bore keyway types and dimensions comply with GB/T3582-1997. The bore uses H7/H8 tolerances, and custom specifications are available. The range includes 15 models, from GL1 to GL15, with nominal torques of 40–25,000 N·m, permissible speeds of 200–4,500 rpm, shaft bore diameters of 16–70 mm, chain pitches of 9.525–63.5 mm, and 14–22 teeth.

KC Series Chain Coupling

KC Series Chain Coupling

The KC Series Chain Coupling consists of a double-strand roller chain and a pair of coupling sprockets, connected and disconnected using the chain. It features a compact design, high torque transmission capacity, excellent reliability and safety, an attractive appearance, easy installation, and straightforward alignment. Made of 45# steel with a blackened surface finish, it comes with set screws. Suitable for a wide range of power transmission applications. Custom specifications are available.

DNV Clamp-Type Shaft Collar Series

DNV Clamp-Type Shaft Collar Series

DNV series clamp-type shaft collars are designed to secure shafts and position synchronous belt pulleys without damaging the shaft during installation. Available in a range of materials, including anodized aluminum alloy, polished stainless steel, and black-oxide-finished 45# steel. Bores are machined to H7/H8 tolerances, and custom specifications are available. A variety of sizes are offered, with outer diameters from 16 mm to 85 mm, bore diameters from 3 mm to 50 mm, widths from 8 mm to 22 mm, axial loads from 0.1 to 5.1 kN, and thread sizes from M3 to M10. Their compact design and easy installation make them widely used in automation equipment, transmission systems, and other applications.

DNW Series Split Shaft Collars

DNW Series Split Shaft Collars

The DNW series features split shaft collars made from high-strength aluminum alloy, 45# steel, or stainless steel. Surfaces are anodized (aluminum alloy) or blackened (45# steel). The split design makes installation and maintenance easier, and helps prevent damage when fitting the collar to a shaft. These collars are suitable for shaft retention and timing pulley positioning. Sizes cover outer diameters from 16 mm to 30 mm and inner diameters from 3 mm to 500 mm, with ranges varying by material, to suit a variety of shaft diameters. The standard surface finish is black oxide; zinc plating and phosphating are available as options. Custom specifications are also available.

GT High-Damping Standard Type

GT High-Damping Standard Type

The GT High-Damping Standard Type coupling features a fully integrated construction, with high-damping rubber molded as one piece with the hubs at both ends to deliver excellent vibration damping. Its optimized damping and rigidity support high-gain servo motor operation and shorten settling time. It also suppresses speed fluctuations in stepper motors and reduces residual vibration during positioning, improving production efficiency and product quality. Models with outer diameters of 15–56 mm use fluorinated high-damping rubber, offering excellent resistance to heat, oil, and chemicals. Three versions are available: standard GT, extended GL, and compact GS. Product dimensions: outer diameter 15–68 mm, length 23–75 mm, bore diameter 3–35 mm; rated torque 1.1–65 N·m; maximum speed 9,000–42,000 rpm; allowable eccentricity 0.15–0.2 mm; allowable angular misalignment 1.5°; allowable axial misalignment ±0.2 to ±0.3 mm; weight 9–473 g. The coupling is made of aluminum alloy with an anodized finish and is supplied with socket head cap screws.

GLE Series Flexible Couplings

GLE Series Flexible Couplings

The GLE Series high-damping extended couplings feature an integrated design in which high-damping rubber is molded together with the hubs at both ends, delivering excellent vibration-damping and rigidity performance. Their optimized design enables high-gain servo motor operation and shorter settling times, while suppressing stepper motor speed fluctuations and residual positioning vibration to improve production efficiency and product quality. Available in outside diameters of 15–56 mm, they use high-damping fluoroelastomer with excellent heat, oil, and chemical resistance. Standard GT, extended GL, and compact GS types are also available. These clamp-type couplings are made of aluminum alloy with an anodized surface finish and supplied with socket head cap screws. A range of outside diameter × length sizes is available: GLE-15×30, GLE-19×34, GLE-25×42, GLE-30×42, GLE-34×44, and GLE-39×55. Rated torque: 0.5–13.5 N·m; maximum speed: 16,000–42,000 rpm; allowable eccentricity: 0.15–0.2 mm; allowable angular misalignment: 1.5°; allowable axial misalignment: ±0.2 to ±0.3 mm. The bore diameters at each end can be freely combined with H7/H8 tolerances, and custom specifications are available.

GS High-Damping Compact Type

GS High-Damping Compact Type

The GS High-Damping Compact Coupling is a shorter, more compact version of the GT high-damping resistant coupling. It features a fully integrated construction, with high-damping rubber molded as one piece with the hubs at both ends. Its optimized balance of vibration damping and rigidity enables high-gain servo motor operation and shorter settling times. It helps reduce speed fluctuations when driving stepper motors and suppresses residual vibration during positioning, improving productivity and product quality. Available in outer diameters of 15–39 mm, it uses fluorinated high-damping rubber with excellent heat, oil, and chemical resistance. The standard GT, extended GL, and compact GS types are all standardized. A wide range of bore sizes is available, and custom specifications can be made to order. Key specifications: outer diameter 15–39 mm; rated torque 0.5–7 N·m; maximum speed 16,000–42,000 rpm; allowable eccentricity 0.15–0.2 mm; allowable angular misalignment 1.5°; allowable axial misalignment ±0.2–0.3 mm.

GX Series High Vibration-Damping Flexible Couplings

GX Series High Vibration-Damping Flexible Couplings

GX Series flexible couplings feature a fully integrated design combining hubs on both sides with high vibration-damping rubber. They are ideal for high-response control motors, enabling high-precision positioning and shorter settling times. The range includes the GX Standard Type and GXT High-Damping Standard Type, with outer diameters of 15–56 mm and overall lengths of 23–60 mm. Bore sizes can be customized. A variety of specifications are available, with rated torques of 1.1–35 N·m, maximum speeds of 11,000–42,000 rpm, allowable parallel misalignment of 0.15–0.2 mm, an allowable angular misalignment of 1.5°, and allowable axial misalignment of ±0.2–0.3 mm. Made of alloy steel, with customizable surface treatments. Widely used in automation equipment and servo motor connections, and in other applications requiring high precision and vibration damping.

GXT High-Damping Standard Flexible Coupling

GXT High-Damping Standard Flexible Coupling

A fully integrated flexible coupling featuring hubs on both sides bonded with high-damping rubber. Designed for high-response control motors, it enables highly precise positioning and shorter settling times. The bore is machined to standard H7/H8 tolerances; custom specifications are available. A range of sizes is offered, with outer diameters of 15–56 mm and lengths of 23–60 mm.

GXC High-Damping Standard Type

GXC High-Damping Standard Type

The GXC Series High-Damping Standard Type Coupling features a fully integrated construction combining hubs on both sides with high-damping rubber. Designed for high-response control motors, it enables high-precision positioning and shorter settling times. Available in a range of outer diameters and lengths, the bore diameter can be selected as required. Special bore configurations, including keyways, hexagonal bores, square bores, and splined bores, can also be machined. Key specifications include a rated torque of 1.1–35 N·m, maximum speed of 11,000–420,000 rpm, allowable eccentricity of 0.15–0.2 mm, allowable angular misalignment of 1.5°, and mass of 8–276 g.

GLC High-Damping Extended Type

GLC High-Damping Extended Type

The GLC series is a high-damping, extended-type flexible coupling with a fully integrated design that combines hubs on both sides with high-damping rubber. It is suitable for high-response control motors, enabling high-precision positioning and shorter settling times. Model numbers begin with GLC, followed by the outside diameter × length. For example, GLC-15×30 indicates an outside diameter of 15 mm and a length of 30 mm. Various bore diameter combinations are available, with bores machined to H7/H8 tolerances. The coupling provides excellent compensation for parallel, angular, and axial misalignment.

GXS Series Flexible Couplings

GXS Series Flexible Couplings

The GXS series features compact flexible couplings with high vibration-damping capability. Their fully integrated design combines hubs on both sides with high-damping rubber. Designed for high-response control motors, they enable high-precision positioning and reduce settling time. Made of aluminum alloy with an anodized finish (custom specifications available). The bore sizes at the two ends can be freely combined, from smaller to larger, and use H7/H8 tolerances; custom specifications are available. A wide range of sizes is offered: outer diameters of 15–39 mm, lengths of 18–40 mm, maximum bore diameters of 6–20 mm, rated torques of 0.5–7 N·m, maximum speeds of 16,000–42,000 rpm, allowable eccentricity of 0.15–0.2 mm, angular misalignment of 1.5°, and axial misalignment of ±0.2 to ±0.3 mm. Suitable for precision drive systems using servo motors, stepper motors, and more.