product — Page 25

A-Series Axial Locking Nuts
A-series axial locking nuts provide axial positioning and secure fastening to prevent loosening. Suitable for fastening applications in mechanical assemblies.

GD-Type Chrome-Plated Linear Shaft
The GD-type chrome-plated linear shaft is part of the cylindrical linear guide (round shaft) series. Its chrome-plated surface provides good corrosion and wear resistance. The shaft is made of GCr15 or 45# high-carbon steel, with a hardness of HRC 62±2 (45#: HRC 58), a surface hardening depth of 0.8–2.5 mm, surface roughness of 0.8S–1.6S, straightness of 80 μm/1000 mm, and roundness of no more than 3.0 μm (Rmax). Solid and hollow versions are available. Solid shaft dimensions are compatible with all of our linear bearings; hollow shafts are available only in diameters greater than 12 mm. Custom shafts are also available, including versions with threaded holes, flats, steps, slots, chain grooves, and other features. These shafts are widely used in automation equipment and mechanical transmission systems.

Support Unit Series
This series includes fixed-side support units (EK type) and support-side support units (EF type), designed to support linear shafts and ensure stability and precise linear guidance. The products are available for a range of shaft diameters (6–20 mm) and feature high-carbon steel bearings and precision locknuts for reliable axial positioning. Key specifications include shaft diameter, overall length, width, height, and mounting-hole spacing to suit different installation requirements. Standard models are listed directly, with no need to assemble a model code.

SBR Series Linear Slide Units
SBR Series Linear Slide Units consist of support rails and slide blocks, with shaft diameters ranging from φ12 to φ50 mm. A variety of standard lengths are available, as well as chrome-plated and stainless steel (SUS440C) options. Support rail models range from SBR12 to SBR50. Slide block models include standard SBR10UU to SBR50UU and extended SBR16LUU to SBR50LUU versions, designed for use with linear bearings. They are widely used in linear motion systems for automation equipment, machine tools, material handling machinery, and other applications.

TBR Linear Slide Unit Series
The TBR series of linear slide units comprises guide rail support units and slider units, with shaft diameters ranging from 16 to 30 mm. Support units are available in standard lengths of 190–6000 mm, in increments of 250–300 mm. Slider units are available in standard (UU) and long (LUU) versions and are used with linear bearings, making them suitable for automated equipment requiring support and guidance. The guide rail support units are made of steel. The compact slider units offer high load capacity, with dynamic loads of 392–1764 N and static loads of 490–2940 N. They are widely used in industrial machinery, automated production lines, and other applications.

SCS Linear Slide Unit Block Series
The SCS series of linear slide unit blocks includes two types: SCS...UU (standard) and SCS...LUU (extended). Used with linear bearings, they provide linear guidance and sliding motion. These products are suitable for applications requiring low-friction linear movement, such as automation equipment and precision machinery. Made from high-quality steel, the blocks offer excellent durability and stability. For detailed dimensions and load capacities, see the tables in the catalog.

SK Series Linear Shaft Supports
SK Series linear shaft support blocks support the ends of linear guide shafts and provide a mounting point. Available in various sizes for shaft diameters from 8 mm to 60 mm. Their compact design makes installation easy, and locking and safety bolts ensure a secure connection. Widely used in automation equipment, robotics, CNC machine tools, and other applications.

SHF Series Linear Motion Shaft Supports
The SHF series linear motion shaft supports hold round shafts in linear motion systems and provide end support. Featuring a spherical joint rod-end design, they are suitable for high-precision positioning applications. The 16 available sizes accommodate shaft diameters from 3 mm to 60 mm. They are secured with locking and mounting bolts and weigh between 13 g and 1,500 g. Made from high-quality steel with a wear-resistant surface treatment, they are widely used in automation equipment, industrial robots, CNC machine tools, and other applications requiring precise linear transmission.

LMB Series Linear Bearings
The LMB series comprises standard linear bearings designed for linear motion systems. Each bearing consists of a steel outer ring, cage, steel balls, and seals, and can support radial loads and light axial loads. Model codes begin with LMB, with suffixes such as OP, UA, and CLU indicating different seal materials, shapes, or rust-prevention treatments. The number of ball rows is configurable to meet different load requirements. These bearings are widely used in automation machinery, electronic equipment, medical instruments, and other applications requiring high-precision reciprocating motion.

LM Series Linear Bearings
LM Series linear bearings are internationally standardized linear motion bearings, widely used in automation equipment, robotic arms, machine tools, and other applications requiring linear guidance. The range includes standard types (LM*LUU), compact types (LM*CLUU), European standard types (LME*LUU), and various extended flange types (LMF/LMK/LMH with round, square, or oval flanges). Bore diameters range from 3 mm to 60 mm, with load capacities from 139 N to 20,000 N. All models are made from high-quality bearing steel for low friction and long service life. Dimensions across the series are interchangeable with those of international brands such as THK and IKO.

LME Series Linear Bearings
The LME series of linear bearings is designed to European standards and is suitable for precision linear motion systems. Made from high-quality bearing steel, these bearings offer high load capacity and a long service life. Models range from LME12 to LME60, with bore diameters from 12 mm to 60 mm. They are available in standard (LUU) and caged (CLUU) versions. These products are widely used in automation equipment, CNC machine tools, industrial robots, and other applications requiring low-friction linear motion. See the catalog for detailed dimensions.

K-Type Lock Nut
K-type lock nuts use 3–8 high-strength bolts to lock the threads through axial deformation. They are suitable for harsh operating environments, applications prone to loosening, and situations requiring high torque. Runout precision can be adjusted by varying the tightening force applied to the axial bolts. Made from 42CrMo or S45C, they have a hardness of HRC 28°–32° and a thread tolerance of ISO 4H. Face runout: 0.002–0.005 mm for M16–M200; 0.005–0.008 mm for M210–M300. A range of sizes from M16 to M60 is available, with pitches of 1.0, 1.5, or 2.0 mm and maximum torque of 4.5 Nm, meeting a variety of application requirements.

LMF Series Flanged Linear Bearings
LMF Series flanged linear bearings are standard bearings for linear motion systems, available in a range of bore sizes (6–100 mm). Their recirculating steel-ball design provides low friction, high precision, and high load capacity. Versions with steel retainers are available for applications such as industrial automation equipment, machine tools, and printing machinery. The allowable diameter tolerance ranges from −5 to −30 μm. Basic dynamic load ratings range from 200 to 14,100 N, and basic static load ratings from 260 to 34,800 N. Choose the standard LMF type or the extended LMEF type to suit different stroke requirements.

LMK Series Linear Bearings
LMK Series linear bearings are flanged linear bearings with steel retainers, offering high load capacity and stable operation. Bore diameters range from 6 to 100 mm, with basic load ratings from 200 N to 14,100 N, making them suitable for linear motion guidance. The steel retainer helps reduce friction and noise and extends service life. Available in a range of sizes to meet different installation requirements, these bearings are widely used in automation equipment, machine tools, industrial robots and more.

LMH Linear Bearings (Flanged Type)
The LMH series features flanged linear bearings with a steel cage, designed for high-precision linear motion systems. Available in a range of sizes with bore diameters from 8 to 30 mm, these bearings have 4 to 6 rows of balls and offer high load capacity and low friction. The permissible diameter tolerance ranges from -5 to -9 μm, and basic static/dynamic load ratings range from 260 to 2,140 N. They are widely used in automation equipment, precision machinery, industrial robots, and other applications requiring linear guidance. This standard flanged bearing series can directly replace equivalent products from international brands.

LMEF Series Flanged Linear Ball Bearings
The LMEF series comprises European-standard flanged linear ball bearings with a steel cage design and bore diameters ranging from 8 to 60 mm. Standard and steel-cage versions are available. Basic dynamic load ratings range from 260 N to 4,700 N, while basic static load ratings range from 400 N to 9,990 N. These bearings support and guide linear motion systems. Models in the series include LMEF8UU, LMEF12UU, LMEF16UU, LMEF20UU, LMEF25UU, LMEF30UU, LMEF40UU, LMEF50UU, and LMEF60UU. They have 4–6 ball rows and weigh between 44 g and 3,180 g. The permissible diameter tolerance grades range from -5 to -16 μm, ensuring a precise fit on the shaft.

LMEK Series Flanged Linear Bearings
The LMEK series comprises flanged linear bearings with steel retainers, available in bore diameters from 8 to 60 mm in a range of sizes. Made from high-quality bearing steel, these bearings offer low friction, high precision, and long service life. Specifications include the number of ball rows, weight, allowable diameter tolerance, and basic dynamic and static load ratings. They are suitable for automation equipment, machine tools, printing machinery, and other applications. The model designation follows the format LMEK + bore diameter + UU, for example, LMEK8UU.

Internally threaded assembled self-lubricating rod end bearing SI..T/K
This series consists of an internally threaded rod end body assembled with a self-lubricating radial spherical plain bearing G.. PW. The rod end body has a left- or right-hand internal thread and a zinc-plated surface. It is suitable for oscillating movements under high loads with minimal maintenance. A wide range of sizes is available, with bore diameters from 5 mm to 50 mm, thread sizes from M5*0.8 to M48*2.0, angles of inclination up to 17°, dynamic load ratings of 5.70–88.0 kN, and static load ratings of 6.00–114.0 kN. For a left-hand thread, add the suffix “L” to the model number, e.g. SI.18 T/K.

SA..T/K / SI..T/K Self-Lubricating Rod End Spherical Plain Bearings
This series of self-lubricating rod end spherical plain bearings is available in female-thread versions (SI..T/K) and male-thread versions (SA..T/K). The rod end housing has a left- or right-hand internal or external thread and consists of a rod end housing and a self-lubricating radial spherical plain bearing, G..PW. The rod end housing is zinc-plated. Bearing bore diameters range from 5 mm to 50 mm, with thread sizes from M5×0.8 to M48×2.0. These bearings can support radial and axial loads and are suitable for mechanical linkages, automation equipment, robotics, and other applications.

SQ..RS Series Spherical Plain Rod-End Bearings
This series of spherical plain rod-end bearings includes straight-shank types (SQ..RS) and Z-type models (SQZ..RS). The bearing housing is made of zinc alloy and has either a left- or right-hand thread, with a rubber seal. Bore diameters range from 5 to 22 mm, with various thread sizes available in standard or fine pitches. The RS suffix indicates a sealed model; models without seals are designated SQ... Add L after the basic model number for left-hand threads (e.g., SQL6RS). Suitable for applications requiring angular compensation and oscillating motion, such as automation equipment and mechanical transmission systems.

SQZ..RS
SQZ..RS series spherical plain rod-end bearings feature a straight shank, a zinc-alloy housing and rubber seals, and are available with left- or right-hand threads. Bore diameters range from 5 to 22 mm, thread sizes from M5 to M22, overall lengths from 46 to 145 mm, and widths from 7 to 24 mm. Load ratings range from 2.8 to 23 kN, weights from 0.025 to 0.76 kg, and allowable tilt angles from 7.5° to 15°. Add the suffix L to models with left-hand threads (for example, SQL6RS). Models without seals belong to the SQ.. series. Suitable for automation equipment, mechanical connections, and similar applications.

KR Series Roller Bearings
KR series roller bearings (stud-type roller bearings/cam followers) are bearing units that can be mounted directly to a frame. They consist of an outer ring, a stud, and rolling elements, and are suitable for linear guides and cam mechanisms, where they can withstand high radial loads. The series includes standard (KR), V-groove (KRV), and eccentric collar (KRE/KRVE) types. Outer diameters range from 13 to 90 mm, widths from 9 to 35 mm, and thread sizes from M5×0.8 to M30×1.5. The dynamic load rating is 280–2,830 N, the static load rating is 180–3,700 N, and the limiting speed is 5,000–29,000 rpm. These products are interchangeable with the IKO CF series.

E-Type Locknut
E-type locknuts use a symmetrical two-point locking design. The locking sections are cut through the threads, distributing the load across the entire thread profile for excellent resistance to loosening. Available in 42CrMo and S45C steel, they have a hardness of HRC 28°–32°, an ISO 4H thread tolerance, and end-face runout of 0.002–0.005 mm. The range includes various thread sizes from M22 × 1.5 to M150 × 2.0. Detailed specifications include outer diameter (D), inner diameter (d), height (h), groove dimensions (n × g), thickness (t), and locking screw size (M), along with unlocking torque and maximum axial load. Suitable for high-strength fastening applications requiring reliable resistance to loosening.

WWC Series Cleanroom Cable Carrier
The WWC Series Cleanroom Cable Carrier is designed for factory automation environments and is suitable for cleanrooms and other applications requiring low dust and particle levels. Its flexible design, combined with internal horizontal and vertical dividers or an integrated cable separator, keeps cables and tubing neatly arranged while reducing friction and tangling. A range of bend radii (R70, R100, R130) and internal dimensions (35×65, 40×85) is available to meet different load and travel requirements. An optional heavy-duty support frame system accommodates extra-long unsupported spans of up to 1,800 mm. The newly patented design resists tension and prevents separation, with a service life of at least 20 million cycles. Operating temperature: 30±5°C. Special specifications, including antistatic and flame-retardant options, are available on request.

Plastic Coolant Hose
Plastic coolant hose is a modular coolant line assembly whose length and direction can be adjusted by hand. Common sizes are 1/4 inch, 3/8 inch, and 1/2 inch, with a standard length of 300 mm. It consists of a base, hose sections (measured by the number of segments), and a nozzle. The total length is calculated as the base length + hose length + nozzle length. Nozzles with different diameters and shapes (round or flat) are interchangeable. The hose can also be used with accessories such as T-connectors, valves, and magnetic bases. Users can choose the length and accessories to suit their needs.

WSL Series
The WSL Series is a range of cable carriers commonly used in factory automation, available in several types, including bridge, enclosed, and low-noise designs. These products protect cables and hoses while guiding them on moving equipment. They offer quick cable installation, a small pitch, low weight, low operating noise (depending on speed), and resistance to wear and corrosion, making them suitable for high-speed applications. Specifications include inner width B1 (7–300 mm), bend radius R (15–200 mm), outer height H2 (10–76 mm), outer width B2 (12–228 mm), and style (non-open B, outside-opening W, or opening on both sides L). The material is PA6+GF30, the color is black, and the operating temperature range is −20°C to 120°C. Subseries include WSL02, WSL07, WSL31, WSL32, WSL04J, WSL06JII, WSL07J, WSL08J, and WSL09J, each offering different combinations of inner width and bend radius. When ordering, specify the model, inner width, bend radius, and style, as well as the length and connector model.

DN Series Locknuts
The DN Series locknuts include DN-type and E-type nuts. They feature a symmetrical two-point locking design and fully cut threads, with the entire thread profile bearing the load for excellent resistance to loosening. Made from 42CrMo or S45C, they have a hardness of HRC 28°–32°, an ISO 4H thread tolerance, and face runout of 0.002–0.005 mm. DN-type nuts are available in thread sizes from M5 to M40, with models DN5 through DN40. E-type nuts are available in thread sizes from M22 to M150 and provide high locking torque and axial load capacity, making them suitable for precision fastening applications.

Steel-Reinforced Cable Carrier, Size 45, Bridge Series
This series of steel-reinforced cable carriers is designed for long travel without sagging. With an inner width of 45 mm, it is suitable for applications requiring high stability and long travel distances. Available in bridge-style (WSLG45Q) and F-style (WSLG45F) designs, with bend radii ranging from 50 mm to 200 mm (some radii are available with different connector models). The outer heights are 77 mm (WSLG45Q) and 67 mm (WSLG45F), respectively; the outer width varies with the bend radius. Connector type C is a common configuration, and multiple mounting dimensions are supported. These carriers are widely used to protect cables in automation equipment, CNC machine tools, robots, and other applications.

Pneumatic Expanding Locating Pin (Double-Acting)
This series of pneumatic expanding locating pins features a double-acting design for locating workpieces. Two functional types are available: diamond pins for locating in a single direction and datum pins for datum positioning. Bore size codes range from 080 to 150, corresponding to straight-hole diameters of φ7.6–φ16.2, to meet a variety of locating requirements. Three seating heights are available: H15, H20, and H25, for different installation heights. Pneumatically actuated, the pins expand to clamp the workpiece, enabling fast locating and release.

WCE High-Capacity Pneumatic Lever Cylinder
The WCE Series High-Capacity Pneumatic Lever Cylinder is designed for clamping workpieces and features a spring-return, single-acting mechanism. Five cylinder force ratings are available: 0.6 kN, 1.0 kN, 1.6 kN, 2.5 kN, and 4.0 kN (at an air pressure of 0.5 MPa). The total stroke is 19.5–33 mm, including a 4 mm clamping stroke. Mounting options include a manifold-mounted type (for installing a speed control valve or an R-threaded plug) and an external-piping type (Rc thread). The clamp arm can be oriented to the left, center, or right. Position confirmation options include a standard type without a sensor, a double-rod type for a probe, and a manifold-mounted type with an air sensor. The maximum operating pressure is 0.5 MPa, and the operating temperature range is 0–70°C. It is widely used for workpiece positioning and clamping on automated production lines.

HFZ Compact Pneumatic Support Cylinder
The HFZ series compact pneumatic support cylinders are air-powered and deliver strong support in a compact design, effectively preventing vibration when machining die-cast or thin-sheet workpieces. They are easy to integrate with pneumatic clamps and feature exposed air piping for convenient installation and maintenance. A dust cover physically shields the cylinder from cutting fluid and chips, improving durability. Bore diameters of 25 mm and 32 mm are available, with support forces of 0.55 kN and 1.5 kN, respectively, at a working pressure of 1 MPa. The piston stroke is 10 mm. Available in standard (P) and high (Q) precision grades to suit different applications. Operating temperature range: 0–70°C. Maximum working pressure: 1 MPa.

WCZ Blank Base Plate
The WCZ series blank base plate is a mounting accessory for linear modules or pneumatic grippers, providing secure mounting and support. Its compact design is intended for use with WCE series linear modules. Mounting holes and locating dimensions on the plate enable precise assembly. The model designation follows the format WCZ 0600-L2, where the numbers indicate the width and length. Parameters include mounting dimensions A (width), C (thickness), D, E, G, N, P, R, and S. A range of sizes is available to accommodate different load requirements.

LD Series Hydraulic Support Cylinder
LD series hydraulic support cylinders feature a sleeve and tapered-piston design that delivers powerful support. In machining applications, they reduce vibration, prevent deformation, and absorb cutting forces to improve machining accuracy. Their compact construction ensures stable performance and a long service life. The small bolt-mounted design is suitable for installation in the limited space available on fixtures and supports workpieces with uneven surfaces. The model code is formatted as LD[body code]-[spring force][-option]. The four body codes are 0262 (M26x1.5), 0302 (M30x1.5), 0362 (M36x1.5), and 0452 (M45x1.5). Spring-force options are L (light spring) and H (heavy spring). Options are no suffix (hydraulic-rise type/standard) and E (spring-rise type). Key specifications: support force 3.0–10.0 kN (at 7 MPa hydraulic pressure), plunger stroke 6.5–10 mm, maximum operating pressure 7.0 MPa, minimum operating pressure 2.5 MPa, proof pressure 10.5 MPa, and operating temperature 0–70°C. Cylinder capacity is available in standard and E types; weight ranges from 0.20 to 0.75 kg. The design includes a contact bolt. Ensure that the support force is at least 1.5 times the clamping force.

CLT Single-Acting Linkage Clamp
The CLT series single-acting linkage clamp is a spring-return, hydraulically actuated clamping device designed for quickly securing workpieces in fixtures. Its compact linkage mechanism delivers stable clamping force in confined spaces. The series includes six sizes, from CLT02 to CLT25, with a range of mounting dimensions and G-thread oil port connections. The clamp body is made of high-strength steel for a long service life. Typical applications include machining centers, welding fixtures, and automated production lines. The operating oil pressure range is 1–7 MPa, the operating temperature range is 0–70°C, and the fluid is standard mineral-oil-based hydraulic oil.

CVH Centering Vise
Hydraulic centering vise with two jaws that move the same distance to keep the workpiece center constant. Designed for machining centers, it eliminates the need to machine unhardened jaws to shape. Operating oil pressure: 1–7 MPa; guaranteed pressure resistance: 10.5 MPa; ambient operating temperature: 0–70°C. Use standard mineral-oil-based hydraulic fluid (equivalent to ISO VG 32). Available in three sizes: CVH04 (4 in), CVH06 (6 in), and CVH08 (8 in), with clamping forces of 10, 20, and 30 kN, respectively, at 7 MPa. Jaw strokes are 5.6, 5.8, and 6.0 mm, respectively; maximum external clamping diameters are 100, 145, and 190 mm; maximum internal clamping diameters are 125, 170, and 220 mm. Two piping options are available: pad piping (G) and RC-thread piping (S).

LC Plunger-Type Top-Flange Hydraulic Support Cylinder
The LC plunger-type top-flange hydraulic support cylinder is a hydraulically actuated support element used to hold workpieces during machining and prevent deformation and vibration. The series includes five sizes, with plunger strokes ranging from 16 mm to 32 mm, and offers two oil-port connection options: manifold-mounted (-C type) and threaded (-S type). It provides high load capacity and flexible installation, making it suitable for automated production lines and fixture systems. Key specifications include body dimensions, mounting-hole dimensions, and port threads; see the dimensional table for details.

PTD Quick-Acting Toggle Clamp Series
The PTD series quick-acting toggle clamps are made from SKH9 or SCM440 steel and have a hardness of HRC 60°. The range includes the PTD1, PTD3, PTD4, and PTD5 subseries. Products are available in various thread sizes (such as M5×0.8, M6×1.0, M12×1.75, and M16×2.0) and dimensions (A, C, and D), with weights ranging from 8 g to 80 g. Designed for industrial clamping and positioning, they are widely used in automated assembly, welding, and other applications.

SFA Hydraulic Expanding Pull-Down Clamp
The SFA series hydraulic expanding pull-down clamp uses hydraulic pressure to pull the workpiece down and secure it against a reference surface. This series is designed for straight holes with workpiece hole diameters of φ6–φ9 mm and comes in a fixed body size of type 1000. Two mounting options are available: type M1 (embedment depth 10 mm) and type M2 (embedment depth 20 mm). Workpiece lift options are type A (with a workpiece-lifting function that raises the workpiece by 0.2 mm when released) and type N (without a lifting function). The workpiece-hole symbols correspond to the following actual diameters: 060 (φ6), 065 (φ6.5), 070 (φ7), 075 (φ7.5), 080 (φ8), 085 (φ8.5), and 090 (φ9). The maximum operating oil pressure is 7.0 MPa. Total stroke is 4.2 mm, operating downward stroke is 1.0 mm, and workpiece lift stroke is 0.2 mm. The operating fluid is ISO VG-32 hydraulic oil. The relationship between clamping force and oil pressure is given by the formula F = 0.4 × P − 0.1 (kN). For positioning, use in combination with a floating structure is recommended; the allowable eccentricity is ±0.5 mm. Operating temperature range: 0–70°C.

CLM Rod-In Clamp
The CLM series rod-in clamp (also known as a rod-entry clamp) is available with various detection options, including built-in air-lock and built-in helium leak detection. It comes in five sizes: 04, 05, 06, 10, and 16. The clamp arm can be oriented to the left (L), forward (F), or right (R). Detection options include Type T (3-point detection) and Type C (clamp detection). Hydraulically driven and rated for an operating pressure of 7 MPa, the clamp has G1/8 or G1/4 oil ports. Its compact design makes it suitable for workpiece positioning and clamping, and it is widely used in automated production lines and fixture systems.

CGC Hydraulic Expansion Clamp
The CGC series hydraulic expansion clamp is a hydraulic fixture for locating and clamping workpieces by their internal bores. It operates at a pressure of 7 MPa. Hydraulic force expands the sleeve to clamp the bore, making the clamp suitable for precision machining and automated production lines. A range of specifications is available, including 2-jaw and 3-jaw versions, to accommodate different bore diameters. During installation, ensure the surface roughness is R6.3 or finer and apply an appropriate amount of grease. The dimensional drawings provide detailed mounting-hole dimensions for models 12 through 16 to ensure interchangeability and accurate installation. The clamp uses fluororubber seals with a hardness of H≤90; the seating surface has a hardness of HRC 55, ensuring stable clamping over the long term.

FP Ball-Locking Pull-Down Cylinder
The FP series comprises hydraulic ball-locking pull-down cylinders with a low-pressure (1–7 MPa), single-acting design. A ball-locking mechanism enables quick workpiece clamping and release. Five body sizes are available, with outside diameters of 39, 55, 65, 75, and 90 mm. Total stroke ranges from 6.7 to 12 mm, and clamping stroke from 3.8 to 8.7 mm. Choose between a manifold-mounted connection (G) and external piping (S); a coolant outlet (D) can also be added. These cylinders are suitable for applications requiring secure clamping, such as automated production lines and workholding fixtures. Their compact, lightweight design features spring return, high tolerance for eccentric loading, and stable performance.

LZ Steel-Ball Locking Pull-Down Cylinder
This series of steel-ball locking pull-down cylinders includes FP-series main units and LZ-series pull-stud accessories. The FP series is available in several sizes (0390, 0550, 0650, 0750, and 0900), with different strokes and mounting dimensions. The optional LZ-series pull studs are designed for use with FP-series units and provide precise bolt connection dimensions for automated clamping applications. A steel-ball locking mechanism ensures reliable clamping.

CST Hollow Workpiece Supports
This series of hydraulically actuated hollow workpiece supports holds workpieces during machining to prevent deformation. The hollow design allows components or clamping mechanisms to pass through. Support force ranges from 4 to 20 kN (at 7 MPa), with an operating oil pressure of 2.5–7 MPa, a guaranteed pressure resistance of 10.5 MPa, and an operating temperature of 0–70°C. Available in five sizes: 04, 06, 10, 16, and 25. Designed for automated fixture systems and use with clamps.

LHA Series Hydraulic Double-Acting Rotary Cylinder
The LHA Series Hydraulic Double-Acting Rotary Cylinder is an industrial automation component that uses hydraulic power to perform rotary and linear clamping actions. It is available in multiple body sizes (outer diameter 36~105mm) and supports plate piping (C/G type) and external piping (S type). The rotation direction can be selected as clockwise (R) or counterclockwise (L). Detection options include the standard type, double-rod type (D), and air sensor plate connection type (M). The optional accessory is the dual clamping arm type (P). The cylinder bore ranges from 31~44mm (for some models), and the piston rod diameter is 15~25mm; the clamping force calculation formula varies by model. Total stroke is 13.5~32mm, comprising a 90° rotation stroke of 5.5~16mm and a clamping stroke of 8~16mm. Weight is 0.7~10.1kg. The speed control valve must be purchased separately; the clamping arm, pin, and retaining ring are not included. The ordering code is LHA[body size]0-[piping method][rotation direction]-[detection method][optional accessory].

CTM Rotary Position-Sensing Clamp
The CTM series consists of rotary position-sensing clamps designed for hydraulic operation. The operating pressure range is 1.5–7 MPa, the proof pressure is 10.5 MPa, and the ambient operating temperature range is 0–70°C. They use mineral-oil-based hydraulic fluid (ISO VG 32) and can be used in environments where water-soluble cutting fluid is sprayed. The clamps rotate through 90° (±3°), with positioning-slot accuracy of ±1° and clamping repeatability of ±0.5°. Four sizes are available: CTM04, CTM05, CTM06, and CTM10. Cylinder force ranges from 3.5 to 9.4 kN, cylinder bore from 31 to 51 mm, and piston rod diameter from 18 to 30 mm. Total stroke is 12–15.5 mm, rotation stroke is 6.5–10 mm, and clamping stroke is 5 mm. Multiple mounting options are available; see the drawings for overall dimensions.

CLU Link Clamp
The CLU series link clamps use a linkage mechanism to quickly clamp and release workpieces. Their compact design delivers high clamping force. Six sizes are available: 02, 04, 06, 10, 16, and 25. The clamping arm can be installed in a left-facing (L), front-facing (F), or right-facing (R) direction. Special versions include a double-ended rod (E) and a pressure sensor (A). The working fluid is hydraulic oil, and cylinder capacities range from 9.0 cm³ to 164.3 cm³. A variety of mounting and connection dimensions are available, along with multiple piping options. O-rings are included as standard. Pneumatic ports for confirming the clamped and released positions are available. These clamps are suitable for securing workpieces on automated production lines, machine tools, welding equipment, and other applications.

CTH Series Tapered Bushings
CTH Series tapered bushings are positioning accessories designed for CTM Series clamps. They ensure accurate installation and orientation of the clamp arm. The series is available in four sizes: CTH04-MS, CTH05-MS, CTH06-MS, and CTH10-MS, with bore diameters øA of 20 mm, 25 mm, 28 mm, and 34 mm, respectively. Used with the precision slot (øF) and locating pin, they allow the clamp arm to be positioned and installed quickly and easily. The clamp arm is not included, allowing users to choose the orientation to suit their needs. High dimensional accuracy ensures reliable clamp operation. These bushings are widely used in automated production lines, pneumatic fixtures, and similar applications.

CLU-F Series Pneumatic Parallel Grippers
The CLU-F series is a range of pneumatic parallel grippers designed for gripping, handling, assembly, and other applications in industrial automation. It is available in six sizes (CLU02-F to CLU25-F), covering a range of gripping forces and strokes. The compact design comes with detailed mounting dimensions, including overall length and width, mounting-hole spacing, and port size, making integration into automation systems straightforward. The gripper body is made of aluminum alloy and features a corrosion-resistant surface treatment, making it suitable for a variety of working environments. The table lists detailed dimensions for each model, including A (overall length), B (width), and φG (gripper diameter), helping users select a model to suit their space requirements. The series can be used with a standard retaining ring (STW-6). Port sizes range from G1/8 to G3/8 to accommodate different air supply pressures.