product — Page 99

SX1 Series Couplings

SX1 Series Couplings

The SX1 series coupling is an Oldham-type coupling secured with clamping screws, designed for precision transmission systems. It has an outer diameter of 16–63 mm, a length of 18–47 mm, and a bore range of 3–28 mm. Rated torque is 0.7–33 N·m, maximum torque is 1.4–66 N·m, allowable eccentricity is 0.1–4 mm, angular misalignment is 3°, and axial displacement is 0.1 mm. Made from aluminum alloy and stainless steel, it offers low inertia and high rigidity. It is widely used to connect components such as stepper motors, servo motors, and lead screws.

SXC16-50 Series

SXC16-50 Series

The SXC16-50 Series is a linear motion component made up of clamping hubs, clamping screws, an intermediate body, and other parts. It may be used in clamping or connecting mechanisms. The page includes a structural diagram but provides few detailed technical specifications.

SY3000-7000 Series Solenoid Valve Manifold Bases

SY3000-7000 Series Solenoid Valve Manifold Bases

The SY3000-7000 series solenoid valve bases use a manifold construction and are compatible with SY3-20, SY5-20, and SY7-20 series solenoid valves, with corresponding base models SS5Y3-20, SS5Y5-20, and SS5Y7-20. The bases are mounted on a single manifold plate, with P(SUP) and R(EXH) arranged for common SUP—common EXH. The manifold supports 2~20 valve stations, and the A and B ports are located on the valve. The P, EA, and EB connection port size is 1/4. These bases are suitable for automated pneumatic control applications requiring centralized air supply and exhaust for multiple valves, reducing piping, saving installation space, and simplifying maintenance.

SY5120 Centralized Wiring Valve Manifold

SY5120 Centralized Wiring Valve Manifold

The SY5120 centralized wiring valve manifold (manifold block) provides centralized mounting for SY series, 4V210, and other solenoid valves, allowing multiple valves to share air supply, exhaust, wiring, and piping. The product is available in configurations based on station count: The F1 is a standard manifold with 4~12 stations and an overall length L of 115~243 mm; L increases by 16 mm for each additional station. The F2 length is calculated as L=station count×K+80, where K is the solenoid valve spacing (typically standard manifold spacing+1 mm); it can accommodate up to 24 stations. The F3 is a custom-developed manifold specifically for 4V210 valves, with 4~14 stations corresponding to L 124~354 mm. Manifold dimensions vary by solenoid valve, so confirm the valve model, station count, and spacing when selecting a product.

SZR2507 Series DC Axial Fan

SZR2507 Series DC Axial Fan

The SZR2507 Series is a compact 25 x 25 x 7 mm DC axial fan featuring a sleeve bearing. Its impeller and frame are made of UL94V-0 flame-retardant plastic. It is available with rated voltages of 5 V and 12 V, with voltage ranges of 3.6–6.8 V and 6.0–13.5 V, respectively. Multiple speed options are available (7,000/10,000/14,000 RPM), with corresponding airflow rates of 0.035–0.054 m³/min, static pressures of 1.22–1.9 mmH₂O, and noise levels of 19.6–26.4 dB-A. Weighing just 5.0 g, it is suitable for cooling compact electronic devices.

SZR9238 Series

SZR9238 Series

This series of AC axial fans features models beginning with SZR9238. The impeller is made of PBT thermoplastic (UL94-V0), and the frame is aluminum alloy. AWG #22 UL1007 lead wires are optional. The motor is a shaded-pole induction motor. Operating temperature: -10°C to +85°C; weight: 310 g. Both sleeve and ball bearing options are available. Voltage options include 100/125, 200/240, and 380/420 V (50/60 Hz). Power: 9–17 W; speed: 1,800–2,700 RPM; noise: 26–38 dBA; airflow: 65–78 (unit unspecified). Suitable for cooling, ventilation, and other industrial automation applications.

SZS01 Heavy-Duty Metal Foot with Rubber Base

SZS01 Heavy-Duty Metal Foot with Rubber Base

The SZS01 series heavy-duty metal foot with rubber base features an S45C steel base with a chrome-plated finish and a rubber layer inset on the bottom for effective shock absorption and slip resistance. It is designed to support and level heavy equipment. The screw size is M8, and the base diameter is 50 mm. Overall heights of 50 mm, 75 mm, and 100 mm are available. With a maximum load capacity of 800 kg, it is lightweight and easy to install. Common applications include automation equipment, conveyors, and packaging machinery.

T10 High-Speed Serpentine Spring Coupling

T10 High-Speed Serpentine Spring Coupling

The T10 series high-speed serpentine spring coupling features a curved tooth profile. Under light loads, the straight sections of the serpentine spring remain almost parallel to the connected shaft axes. As the load increases, the spring deforms further and its contact arc with the teeth grows, increasing stiffness and creating nonlinear variable-stiffness characteristics. The coupling is suitable for operating conditions involving significant torque fluctuations and forward and reverse rotation, and provides effective cushioning. It is made from grade 45 steel and is normally blackened. Nickel plating, zinc plating, and phosphating are available as alternatives. Use the selection procedure to determine the appropriate type and parameters before ordering.

T10 Timing Belt Pulleys

T10 Timing Belt Pulleys

T10 timing belt pulleys feature a T10 tooth profile and a 10 mm pitch, making them suitable for high-speed, low-torque applications. They are commonly made of aluminum alloy and can be finished with clear anodizing. These pulleys offer smooth, quiet, and efficient power transmission and are widely used in automation equipment, conveyor systems, packaging machinery, and other applications.

T10 Timing Belt

T10 Timing Belt

The T10 timing belt is a trapezoidal-tooth belt with a 10 mm pitch, designed for general industrial power transmission. It offers smooth operation, low noise, and requires no lubrication. The standard length range runs from 340 mm to 2,680 mm, allowing you to choose the right size for your needs. The belt uses fiberglass cords for high strength and low elongation; a nylon fabric facing on the teeth helps reduce operating noise; and the body is made from a specially compounded rubber that resists oil, dirt, and aging. It is widely used in power transmission systems in the textile, machine-tool, tobacco, packaging, and food-processing industries.

T10 Series Polyurethane Timing Belts

T10 Series Polyurethane Timing Belts

T10 series polyurethane timing belts feature a T10 tooth profile with a 10 mm pitch. The belt body is made of thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. Cords are available in galvanized steel or aramid. Green nylon fabric, black nylon fabric, or antistatic black fabric can be added to the tooth side and belt back. Standard widths include 12, 16, 20, 25, 30, 50, 100, and 150 mm. These belts offer high wear resistance, high tensile strength, and low elongation, making them suitable for linear drives, reverse-curved and internally tensioned curved applications, and other power-transmission and conveying uses. The minimum number of clamped teeth is 6. The minimum splice length for joined belts is 600 mm, and the maximum permissible load at the splice is 50% of the belt's rated load.

T10 Series Timing Pulleys

T10 Series Timing Pulleys

T10 timing pulleys have a 10 mm pitch and are designed for industrial drive systems. Available in a range of tooth counts and lengths, from 26 to 90 teeth and 260 to 900 mm, respectively. Precision-machined for smooth, quiet operation. Choose from S45C steel or SUS304 stainless steel to suit different operating environments. Available in various pulley configurations, including A, B, and F types, as well as keyless designs for easy installation and removal. Widely used in automation equipment, conveyor machinery, textile machinery, and other applications.

T10 K13 Series Open-Ended Polyurethane Timing Belt

T10 K13 Series Open-Ended Polyurethane Timing Belt

The T10 K13 series open-ended polyurethane timing belt, also known as a splicing belt, has a 10 mm pitch and a K13 tooth profile. Its toothed surface can be supplied open-ended or spliced into a loop. Made from polyurethane (PU), the belt is available in white or black, with steel or Kevlar tensile cords, offering high strength and wear resistance. Length tolerance is ±0.5 mm/m, thickness tolerance is ±0.4 mm, maximum width is 150 mm, and standard length is 100 m. Optional features include fabric covering on the tooth side (NFT), fabric covering on the back (NFB), fabric covering on both sides, added rubber, or an integrated guide strip. It is suitable for linear drives, material conveying, and other applications requiring on-site fastening or quick splicing.

T2.5 Timing Pulley

T2.5 Timing Pulley

T2.5 timing pulleys are designed for high-speed, low-torque applications. Made of aluminum alloy, they are available with either natural-color anodizing or a non-blackened finish. Multiple pulley codes (BLA, BLH, BSY, BSP, and BSM) are offered, corresponding to different materials and surface treatments. These pulleys are compatible with T2.5-tooth timing belts. Pulley and bore shapes are selectable; the bore diameter has an H7 tolerance. Refer to the catalog or website for detailed dimensions.

T2.5 Open-Ended Polyurethane Timing Belt

T2.5 Open-Ended Polyurethane Timing Belt

This series features open-ended polyurethane timing belts with a T2.5 tooth profile, suitable for linear drives and power transmission. The belt body is made of thermoplastic polyurethane with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid, with white and black as standard colors; other colors are available on request. Standard widths are 10/16/20/50 mm, thickness is 1.8±0.2 mm, and the length tolerance is ±0.5 mm/m. Belts are available in standard 100 m rolls or cut to specified lengths. The product offers high abrasion resistance, oil resistance, and tensile strength, making it suitable for drive systems in automation equipment, packaging machinery, printing machinery, and more. The tooth profile dimensions table lists the weight, maximum allowable load (for galvanized steel and aramid cords), and elongation for each width. Tooth shear strength varies with speed. Bend-radius requirements specify the minimum pulley tooth count and diameter.

T2.5 Trapezoidal-Tooth Timing Belt

T2.5 Trapezoidal-Tooth Timing Belt

The T2.5 series trapezoidal-tooth timing belt has a 2.5 mm pitch and is designed for precision, light-load power transmission. Standard lengths range from 120 mm to 1,475 mm, corresponding to 48 to 590 teeth, with length accuracy of up to 0.01 mm. These belts offer reliable synchronization and low-noise operation, and are widely used in office equipment, small automation systems, and precision instruments. They are typically made of neoprene or polyurethane and reinforced with a fiberglass tensile cord. A range of standard lengths is available for direct selection, with no customization required.

T20 Serpentine Spring Coupling

T20 Serpentine Spring Coupling

The T20 serpentine spring coupling is a variable-stiffness flexible coupling that uses a serpentine spring as its elastic element. It provides cushioning, vibration damping, and compensation for shaft misalignment. Its structure consists of inner and outer rings: the inner ring accommodates the straight section of the spring, while the outer ring accommodates its deflected section. As the load increases, the spring deflects further, increasing the arc of contact with the teeth and reducing the distance between contact points. This increases stiffness, resulting in a nonlinear torque transmission relationship. It is suitable for applications involving substantial torque fluctuations and forward-and-reverse rotation. Straight tooth profiles are easier and less expensive to machine, while curved tooth profiles provide better cushioning. The main material is 45# steel. The standard surface finish is black oxide; nickel plating, zinc plating, and phosphating are available as options.

T20 Series Timing Pulleys

T20 Series Timing Pulleys

The T20 series timing pulleys are designed for high-speed, low-torque drives. Made from aluminum alloy, they feature a natural anodized finish that provides good corrosion and wear resistance. They are suitable for a wide range of applications requiring synchronous belt drives, including automation equipment and conveyor machinery. The T20 tooth profile conforms to standards and is compatible with T20 synchronous belts. Available in a variety of tooth counts and bore sizes. Please refer to the catalog for detailed specifications.

T20 Polyurethane Timing Belt, Open-Ended/Spliced

T20 Polyurethane Timing Belt, Open-Ended/Spliced

The T20 polyurethane timing belt is available in open-ended or spliced configurations and is made from thermoplastic polyurethane with a hardness of 92 Shore A. The tensile cords are available in galvanized steel or aramid. The tooth side and belt back can be customized with no covering, green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 25/32/50/75/100/150 mm; thickness is 8 ± 0.45 mm, and the length tolerance is ±0.8 mm/m. Standard roll length is 100 m, or the belt can be cut to a specified length. Suitable for a range of motion types, including linear transmission and curved drives, it offers high abrasion, oil, and fatigue resistance. It is widely used in automation equipment, packaging machinery, textile machinery, and other applications.

T5 Timing Pulley

T5 Timing Pulley

T5 timing pulleys have a 5 mm pitch and are suitable for high-speed, low-torque drives. Made of aluminum alloy, they are available with natural anodizing (BLA) or untreated, non-blackened finishes (BSH, BSM). Nominal widths include 10 mm, 15 mm, 20 mm, and 25 mm. Bore configurations include F, V, and Y; bore diameters are held to dH7 tolerances. Available in a range of tooth counts and shapes, these pulleys are suitable for precision positioning and power transmission.

T5 Idler Pulley

T5 Idler Pulley

The T5 idler pulley is designed for T5 synchronous belt drives and has a 5 mm pitch. It is available with three bearing configurations: a central bearing, bearings on both sides, or an intermediate bearing. All products have 100 teeth, with nominal widths ranging from 28.65 to 47.75 mm. Tooth profiles are available in sizes 8, 10, 12, and more, making these idlers suitable for tensioning and guiding a variety of synchronous belt drive systems.

T5 Keyless Timing Pulley

T5 Keyless Timing Pulley

T5 keyless timing pulleys feature an ISO-standard tooth profile and are designed for T5 timing belts. The keyless design makes installation and removal easy, while a range of pulley shapes accommodates different mounting requirements. They are widely used in automation equipment and industrial power transmission.

T5 Keyless Timing Pulleys (Centering Function)

T5 Keyless Timing Pulleys (Centering Function)

This series of T5 keyless timing pulleys features a T5 tooth profile and a keyless centering function, making it suitable for precision drive systems. A range of pulley shapes is available, including E, F, P, BLAM, and BLKM, to meet different mounting and application requirements. The keyless design simplifies installation, while the centering function ensures smooth power transmission. For specific dimensions and technical specifications, please consult the full product catalog.

T5 Series Polyurethane Timing Belts

T5 Series Polyurethane Timing Belts

T5 series polyurethane timing belts are made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The core cords are available in galvanized steel or aramid. The tooth side can be covered with green nylon fabric, black nylon fabric, or antistatic black fabric; the same fabric options are also available for the belt back. Standard widths are 6, 10, 15, 20, 25, 32, 50, and 100 mm. Open-ended belts are suitable for linear drives. Spliced belts are joined tooth-to-tooth by welding to form endless belts for conveying equipment. The tensile strength at the splice is 50% of the belt body strength, and the minimum splice length is 600 mm. The belts have a standard T5 tooth pitch. Required bend radii vary depending on the type of motion and core cord material. These products meet standard industrial application requirements; maximum permissible load and shear strength vary with belt width and speed.

T5 Series Timing Pulleys

T5 Series Timing Pulleys

T5 series timing pulleys are designed for T5 tooth-profile timing belts with a 5 mm pitch. Available in a range of tooth counts and lengths, with pulley profiles including A-type and F-type to suit different drive requirements. Typically made of aluminum alloy or steel, they can also be surface-treated. Widely used for precision power transmission in automation equipment, machine tools, packaging machinery, and other applications.

T5 timing belt

T5 timing belt

The JAGUAR T5 timing belt has trapezoidal teeth and a 5mm pitch. Designed for light- to medium-load synchronous drives, it is commonly paired with T5 timing pulleys and widely used in packaging machinery, printing equipment, office automation equipment, textile machinery, and various small drive mechanisms. The catalog uses the pitch length (mm) as the model suffix. Pitch lengths range from 150~1620mm, corresponding to 30~324 teeth, with the relationship: number of teeth = pitch length ÷ 5. The designation consists of the model (5mm pitch) + timing belt pitch length code (mm). Belt width is indicated separately by a width code; the code shown in the catalog is 10 (meaning a belt width of 10mm). These are standard products with short lead times and can be selected directly by pitch length, tooth count, and belt width. Other timing belt tooth profiles, including AT5 and AT10, are listed on the same page but are not part of this series.

T5/T10/T20 Series Polyurethane Open-Ended/Joined Belts

T5/T10/T20 Series Polyurethane Open-Ended/Joined Belts

This series of polyurethane open-ended/joined belts is designed primarily for conveying and synchronous drive applications. The belt ends can be joined to form a continuous loop. The range includes three tooth pitches: T5 (5 mm), T10 (10 mm), and T20 (20 mm). Available in white or black, with steel or Kevlar cords for a balance of strength and flexibility. Maximum standard widths are 450 mm for T5/T10 and 150 mm for T20; the standard roll length is 100 m. Length tolerance is ±0.5 mm/m. Thickness tolerance is ±0.2 mm for T5/T10 and ±0.4 mm for T20. Optional features include fabric on the tooth side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), a cover coating, double-sided teeth, and an integrated guide strip, to suit different friction, wear-resistance, and guiding requirements.

T80 Series Timing Belts

T80 Series Timing Belts

The T80 timing belt outside adjustment table lists the corresponding outside adjustment values for different belt lengths, for use when installing and adjusting timing belt pulleys. This table is part of the design section and applies to the T80 belt profile. Adjustment values range from 3 mm to 30 mm, and belt lengths range from 254 mm to 4,572 mm.

tBOX500-510-FL Series Intelligent Transportation Embedded Computer

tBOX500-510-FL Series Intelligent Transportation Embedded Computer

The tBOX500-510-FL Series embedded computer is a fanless embedded industrial PC designed for intelligent transportation, rail transit, and in-vehicle applications, with several CPU configurations available. It features low-voltage Intel Core i7-7600U / i5-7300U / i3-7100U / Celeron 3965U processors, a chipset integrated into the SoC, and TPM 2.0 support. Memory supports two DDR4-1866/2133 SO-DIMMs, for up to 32 GB. I/O includes one gigabit RJ-45 Ethernet port (Intel 1210-IT), four USB 3.0 ports, one serial port (console or RS-232/422/485), one DVI-I (VGA/DVI) display output, and audio interfaces. For expansion, it provides three full-size PCIe Mini Card slots, two SIM card slots, and two value-added module slots, making it easy to integrate communication modules such as 4G/Wi-Fi/LTE. Storage supports two removable 2.5-inch SATA hard

tBOX520 Series Embedded Computer

tBOX520 Series Embedded Computer

The tBOX520 Series Embedded Computer is a fanless industrial computer designed for intelligent transportation and rail transit applications. It features a 12th Gen Intel Core i7/i5/i3 or Celeron processor (15W/28W), supports up to 32GB of DDR5-4800 memory, and integrates TPM 2.0. It offers dual HDMI 4K display outputs and one 2.5GbE network port, with an optional configuration of eight M12/RJ-45 PoE/PoE+ power ports, making it suitable for applications such as roadside units and onboard computing. It supports M.2 NVMe, 5G/Wi-Fi 6/LTE wireless expansion, and two 2.5" SATA hot-swappable storage drives, with built-in RAID 0/1 and watchdog functionality. It operates across a wide temperature range of -40°C to +70°C and is certified for rail transit applications under EN 50155 and EN 45545-2. The chassis supports wall mounting, measures 321×210.2×73.3mm, and weighs approximately 3.9kg net. Supports Windows 11 64-bit and Ubuntu 22.

TC-01 Tube Cutter

TC-01 Tube Cutter

The TC-01 is a handheld cutter for pneumatic tubing, including PU polyurethane tubing and nylon tubing (PA6/PA12/PA11). It produces clean, burr-free cuts without easily flattening the tubing, making it convenient for quick on-site cutting. Lightweight, portable, and easy to use, it is a common tool for pneumatic tubing installation and maintenance. The catalog lists this cutter in a single model, TC-01, for use with nylon tubing in this series (4x2.5, 6x4, 8x6, 10x8, 10x7.5, 12x10, 12x9; 100M/200M per roll).

TCL/TCM80 Series Electric Cylinders

TCL/TCM80 Series Electric Cylinders

The TCL/TCM80 series electric cylinders are available in two configurations, TCL and TCM, with strokes from 25mm to 250mm. The catalog provides a table of overall dimensions in millimeters for each stroke length to help determine the installation space required. The series is suitable for automated applications requiring linear push-pull, positioning, and reciprocating motion. Select the TCL or TCM configuration based on the load, speed, and mounting method, and refer to the dimensions for the required stroke length.

TGC1 Crowned-Tooth Gear Coupling

TGC1 Crowned-Tooth Gear Coupling

The TGC1 series crowned-tooth gear coupling features a lightweight design and low moment of inertia, and can accommodate relatively large axial displacement. It is suitable for connecting two horizontal, coaxial drive shafts in medium- and low-load, high-speed applications. It can rotate in either direction, and either external-tooth sleeve can serve as the driving-shaft input end. Product parameters include maximum shaft diameter, nominal torque, ultimate torque, speed, axial compensation, radial compensation, moment of inertia, and weight. Custom bore dimensions are available.

TK10-K13/ATK10-K13 Polyurethane Timing Belt, Open-Ended/Joined Type

TK10-K13/ATK10-K13 Polyurethane Timing Belt, Open-Ended/Joined Type

This series of polyurethane timing belts is available in two tooth profiles, TK10-K13 and ATK10-K13, for open-ended or joined-belt drives. The belt body is made of thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The tensile cords are made of galvanized steel wire or aramid cord. The tooth surface and belt back can be left uncovered or covered with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths for TK10-K13 are 30, 50, 75, 100, and 120 mm; standard widths for ATK10-K13 are 30, 50, 75, and 100 mm. The belt thickness is 8.5±0.3 mm, and the length tolerance is ±0.8 mm/m. The standard length is 100 m, or a custom length can be supplied. These belts offer high wear resistance, high load capacity, and low elongation, and are widely used for synchronous power transmission in automation equipment, packaging machinery, textile machinery, and other applications.

TL115 Steel Cable Carrier

TL115 Steel Cable Carrier

The TL115 steel cable carrier is part of Shengda’s cable carrier range and is designed for moving machinery that requires protection for cables and pipes. Made of steel, it offers high strength and wear resistance. The installation drawing provides the formula for calculating the carrier’s overall length: L = number of links × 115. The carrier is available in an integral design (Type I), a top-and-bottom split design (Type II), and a frame design (Type III). Support plate openings are available in integral and top-and-bottom split configurations. Connection options include the standard connection, Connection A, and Connection B. With a pitch of 115 mm, the carrier is suitable for a wide range of industrial automation applications.

TL125 Steel Cable Carrier

TL125 Steel Cable Carrier

The TL125 steel cable carrier protects cables and hoses on machinery. It has a chain pitch of 125 mm and is available with a choice of bend radii and support plate designs, including one-piece and top-and-bottom split types. When ordering, specify the model, support plate type, bend radius, support plate width, and carrier length. It is widely used in applications involving reciprocating motion, such as CNC machine tools and automated production lines.

TL180 Steel Cable Carrier

TL180 Steel Cable Carrier

The TL180 steel cable carrier is designed to protect moving cables and hoses on machine tools, automation equipment, and similar applications. It is available with three support plate styles: Type I, one-piece (holes can be added on request); Type II, split top and bottom (holes can be added on request); and Type III, with separators (spacers can be fitted on request). The carrier length L, support plate width B, and bend radius R can all be customized. Example order code: TL180III-250×300×9800.

TL180 Steel Cable Carrier

TL180 Steel Cable Carrier

The TL180 steel cable carrier is designed to protect cables and pipes, and is suitable for machine tools, automation equipment, and other applications. This series has a pitch of 180 mm; its total length, L, can be calculated by multiplying the number of links by 180. The carrier's support plates are available in two designs: Type I, a one-piece design, and Type II, split into upper and lower sections. The installation drawing provides detailed overall dimensions and mounting specifications. Built with standard connections, the carrier is sturdy, wear-resistant, and durable, meeting the needs of cable carrier applications in a wide range of industrial environments.

TL225 steel cable carrier

TL225 steel cable carrier

The TL225 steel cable carrier is a mechanical component designed to protect cables and piping. It consists of steel chain plates with a 225 mm pitch, and its total length is L = number of links × 225. Three support plate types are available: Type I (one-piece), Type II (split top and bottom), and Type III (frame type). The bend radius R, support plate width B1, and carrier length L can be customized to meet user requirements. Suitable for moving cable routing systems in various types of automation equipment, it offers high strength and wear resistance.

TL250 Series Steel Cable Carrier

TL250 Series Steel Cable Carrier

The TL250 Series Steel Cable Carrier has a 250 mm pitch and is designed to guide and protect cables, oil hoses, and air hoses on machine tools, automation equipment, and similar applications. It is available with three support plate types: Type I, one-piece; Type II, split into upper and lower sections; and Type III, frame type. Holes or separator plates can be added to meet customer requirements. The bend radius (R), support plate width (B1), and carrier length (L) can all be customized. Length is calculated by multiplying the number of links by 250 mm. Ordering example: TL250II-600×400×12000 indicates Type II support plates, a 600 mm bend radius, a 400 mm width, and a 12,000 mm length.

TL45 Steel Cable Carrier

TL45 Steel Cable Carrier

The TL45 series steel cable carrier has a 45 mm pitch and comes in two structural types: Type I, an integrated design, and Type II, which separates into upper and lower sections. It uses a standard connection method and is suitable for protecting cables on machinery, offering excellent wear resistance and reliability.

TL65 Steel Cable Carrier

TL65 Steel Cable Carrier

The TL65 steel cable carrier is a heavy-duty carrier with a 65 mm pitch, designed to protect cables, oil hoses, air hoses, and other lines in high-speed reciprocating applications. Its total length (L) equals the number of links × 65 mm. It offers high load capacity, excellent wear resistance, and a long service life, and is widely used in machine tools, automation equipment, robotics, and other fields.

TL65 Series Steel Cable Carrier

TL65 Series Steel Cable Carrier

The TL65 steel cable carrier is a mechanical component designed to protect cables and pipes, suitable for machine tools, automation equipment, and other applications. This series has a pitch of 65 mm, and its overall length is calculated by multiplying the number of links by 65 mm. It is available in three structural types to meet different installation requirements: Type I, one-piece; Type II, split into upper and lower sections; and Type III, frame style. Made of steel, it offers high strength and wear resistance. The installation dimension drawings provide detailed connection methods and support plate designs to help users select and install the right model.

TL80 Steel Cable Carrier

TL80 Steel Cable Carrier

This series features TL80 steel cable carriers and includes installation dimension drawings. The carriers are available in three structural designs: integral (Type I), split top-and-bottom (Type II), and frame (Type III), all using standard connection methods. They protect cables and hoses in machine tools, automation equipment, and other applications, and offer high strength, wear resistance, and corrosion resistance. Specific parameters, such as bend radius, width, and length, should be determined according to the application and model selected.

TL95 Steel Cable Carrier

TL95 Steel Cable Carrier

The TL95 series steel cable carrier protects cables, hydraulic hoses, air hoses, and other moving lines on heavy machinery and automated equipment. It has a 95 mm pitch and is available with two support-plate designs: integral (Type I) and split top-and-bottom (Type II). Choose from a range of bend radii, and have the support-plate width customized to your requirements. Its high-strength steel construction is wear- and corrosion-resistant, ensuring smooth operation and a long service life. It is widely used in machine tools, robotics, metallurgical equipment, lifting machinery, and other applications. When ordering, specify the carrier model, support-plate type, bend radius, support-plate width, and total carrier length.

TSV86 Series Solenoid Valves

TSV86 Series Solenoid Valves

TSV86 series direct-acting solenoid valves use air filtered to 40 microns as the working medium. They have an effective cross-sectional area of 18 mm² and G1/4 ports. The operating pressure range is 0–0.8 MPa, and the operating temperature range is 0–60°C. The series includes two-position, five-way and two-position, three-way valves, available in mechanically latched and spring-return versions. The ordering code consists of the series designation TSV86, the position/way code (52 or 32), the port size code (1 or 2), and the version code (M or S).

TSV98 Series Solenoid Valve

TSV98 Series Solenoid Valve

The TSV98 Series Solenoid Valve is a direct-acting pneumatic solenoid valve designed for compressed air filtered to 40 microns. The series primarily offers 2-position, 3-way (3/2-way) models, with G1/8" or G1/4" ports and M (mechanical latching) or S (spring return) configurations. It has an effective cross-sectional area of 18 mm², an operating pressure range of 0–0.8 MPa, and an operating temperature range of 0–60°C. It is widely used in automation control systems.

VEX1133 Series High-Flow Precision Pressure Regulator

VEX1133 Series High-Flow Precision Pressure Regulator

The VEX1133 series high-flow precision pressure regulator is designed for applications requiring a stable, high-flow air supply, such as spray painting and pneumatic control. Its pilot-operated design maintains stable outlet pressure even when inlet pressure fluctuates, providing precise pressure regulation, high flow capacity, and low pressure loss. The valve body has a pressure gauge port and a locking adjustment handwheel to prevent accidental changes to the set pressure. Thread types are Rc (no designation in the model number) and NPT (designated N). The port size is indicated by two digits, with 02 corresponding to 1/4″. A special specification suffix (such as X259) can be added to the end of the model number to meet custom piping connection requirements. When selecting a model, specify the base model VEX1133 + thread type and port size + special specification, in that order.