Linear Motion Accessories — Page 10

FLWFEV/FLWFDV Series Manual Positioning Stages

FLWFEV/FLWFDV series manual positioning stages feature a precision screw drive and a black-anodized aluminum alloy body for manual precision positioning in optical, inspection, and tooling applications. They are available in two movement configurations: FLWFEV provides movement along the XZ axes, while FLWFDV provides movement along the XYZ axes. Two platform sizes, 25 and 60, are available, each with L (left) and R (right) mounting orientations. The 25 size has a 25mm×25mm platform, ±5mm travel, 9.8N(1kgf) load capacity, and a weight of 0.08kg(EV)/0.11kg(DV). The 60 size has a 60mm×60mm platform, ±9mm travel, 19.6N(2kgf) load capacity, and a weight of 0.55kg(EV)/0.73kg(DV). All models have a minimum scale division of 0.1mm and a travel parallelism of ≤0.02mm/10mm.

FLWFEV/FLWFDV Series Precision Screw-Driven Positioning Stages

The FLWFEV/FLWFDV series consists of manual positioning stages driven by precision screws. Each features a 40mm×40mm aluminum alloy platform with a black anodized finish. The precision screw drive enables micrometer-level fine adjustment, with a minimum scale division of 0.1mm and travel parallelism of ≤0.02mm/10mm. The FLWFEV40 provides movement along two axes (XZ), while the FLWFDV40 provides movement along three axes (XYZ). Both offer ±7mm travel per axis and a rated load of 19.6N (2kgf), with total weights of 0.22kg and 0.29kg, respectively. Each model is available in -L and -R configurations. These stages are suitable for precise positioning and fine adjustment of optical components, sensors, probes, and small workpieces. They are commonly used at setup stations for optical laboratory platforms, inspection equipment, and small automation systems. Select a model based on the required number of axes (XZ or XYZ), mounting orientation (L/R), and load capacity.

RLSF Series Ball Splines

RLSF Series Ball Splines

The RLSF series is an integrated ball spline in the rotary series. Its compact design makes it suitable for applications requiring combined rotary and linear motion. Accuracy grades are available in Normal (N), High (H), and Precision (P), measured by the runout of the outer diameter of the spline nut relative to the spline shaft’s support section. Available shaft diameters are 16, 20, 25, 32, 40, and 50 mm, with lengths up to 800 mm. The series offers high rigidity and low friction, and is widely used in rotary drive units for automation equipment, machine tools, robots, and other applications.

FLXSC Series Linear Modules

The FLXSC series linear modules (linear slides) are shown on this page with dimensional drawings to help verify installation dimensions and select the stroke length. The main model is FLXSC160, with the numerical suffix indicating the stroke. Three stroke options are listed: 100, 200, and 400 (FLXSC160-100, FLXSC160-200, and FLXSC160-400). The overall length increases with the stroke. Select the model according to the travel distance required by the equipment, and use the dimensional drawings to check mounting hole locations, body width, and overall length. Ensure that the interface dimensions match the connected mechanism, coupling, or drive motor. Refer to the corresponding specification table for performance parameters such as repeat positioning accuracy, rated load, and maximum speed.

FLVSC Series Linear Modules

The FLVSC series is a range of linear modules (linear stages) from FARAY AUTOMATION. The catalog provides mounting and overall dimensions for each size in outline dimension drawings. The available documentation covers two stroke versions of the 160 size (body cross-section/guide rail width on the order of 160): FLVSC160-100 and FLVSC160-200, with strokes of 100mm and 200mm respectively. Model numbers consist of the “FLVSC160” base designation followed by the “-stroke” suffix. When selecting a model, use the body length, mounting hole positions, carriage surface dimensions and allowable stroke shown in the outline drawing to plan the mechanism layout and determine the motor mounting method and load capacity. The series is suitable for automated equipment requiring linear reciprocating positioning, handling or pressing. Rated load, maximum speed, repeatability and drive type (screw or timing belt) must be confirmed in the complete catalog; this page provides outline dimensions only for the two stroke versions of the 160 size.

LZJ Series Scissor Lift Stages

The LZJ series consists of scissor lift stages with a scissor support mechanism and a precision-ground lead screw drive. They are designed for high-load height adjustment applications requiring long travel and variable positioning. The aluminum alloy platform moves along the Z axis and comes standard with a locking mechanism to secure it in position after adjustment. The series includes three sizes: platform dimensions of 80×140mm, 100×160mm, and 160×220mm, with corresponding travel ranges of 30mm, 50mm, and 70mm and load capacities of 196N(20kgf), 245N(25kgf), and 294N(30kgf). Parallelism is 0.2mm or 0.3mm, and weight ranges from 1.26~3.72kg. These stages are suitable for optics, inspection, fixtures, and other applications requiring manual long-travel height adjustment and load support. Allow sufficient vertical space during installation based on the minimum and maximum stage heights.

LZJ Series Linear Guide Rails

Page 174 of the catalog provides dimensional drawings for the LZJ1016 and LZJ1622 linear guide rails. The series provides linear guidance and load support in automation equipment. When selecting a model, confirm the dimensions based on the available installation space, rail width, carriage or rail length, and load conditions. This page shows external dimensions only; detailed specifications such as accuracy class, load rating, and material are not listed. Refer to the dimension tables in the complete catalog for details.

FTD Series Manual Goniometer Stages

FTD series manual goniometer stages feature a black anodized aluminum alloy body and a handwheel drive for angular adjustment in the α and β directions. The series includes FTD-40 and FTD-60 models, with platform sizes of 40mm×40mm and 60mm×60mm and platform thicknesses of 16mm and 20mm, respectively. Both models have an α and β axis travel of ±2°. Their load capacities are 29.4N (3kgf) and 49N (5kgf), and their weights are 0.06kg and 0.17kg, respectively. These stages are suitable for precise angular adjustment and positioning of optical components, sensors, and small workpieces.

FMT Series Manual Translation Stages

The FMT series is a range of compact, precision manual linear stages with screw drives, designed for micron-level positioning of optical components, probes, and small workpieces. The series offers 6.5 mm and 13 mm travel options, with respective accuracies of 0.009 mm and 0.01 mm. Standard or nut mounting and flat or ball shaft ends combine to create 8 standard models, weighing from 9.9 g to 32.6 g. Compact and consistently accurate, the stages can be mounted directly on optical tables or equipment bases for precision positioning in laboratory setup, inspection systems, and small automated equipment.

FMT Series Manual Precision Translation Stages

The FMT series consists of miniature manual precision translation stages (fine adjustment stages) driven by a fine-pitch lead screw. They provide 0.5mm of travel per revolution (0.25mm available as a custom option), a minimum scale graduation of 0.01mm, and an accuracy of 0.007mm. They are suitable for fine positioning and manual adjustment of optical components, sensor probes, and miniature fixtures. Two stage sizes are available: FMT6.5 and FMT13, with travel ranges of 6.5mm and 13mm respectively. Mounting options include standard and nut-mounted versions, while shaft ends are available in ball and flat styles. Large-diameter shafts and shaft self-locking mechanisms are also available. Weighing 29.5g~43.7g, these compact, rigid stages can be integrated directly into small automation equipment, inspection devices, and laboratory setups.

RSSY Precision Ball Screw Spline

RSSY Precision Ball Screw Spline

The RSSY series consists of precision ball screw splines that combine the functions of a ball screw and a ball spline to provide combined rotary and linear motion. Axial clearance is zero, lead accuracy is C5, rotational backlash is zero (light preload P1), and spline shaft accuracy is grade H. Nominal models include RSSY01616, RSSY02020, RSSY02525, RSSY03232, and RSSY04040, with shaft diameters of 16–40 mm and leads equal to the shaft diameters. Custom shaft lengths are available, and surface treatments are optional. The designation consists of segments for the nominal model, thread direction (R), shaft diameter, lead, number of ball circuits (A1), manufacturing process (G), accuracy grade (C5), spline accuracy (H), spline type (S/H), length, preload (P1), and number of thread starts (1A), separated by spaces.

RSLY Precision Ball Screw Spline

RSLY Precision Ball Screw Spline

The RSLY series is a precision ball screw spline that combines the functions of a ball screw and a ball spline to provide combined rotary and linear motion. The ball screw section has zero axial backlash and C5 lead accuracy; the ball spline section has zero rotational backlash (P1 light preload) and H-grade accuracy. Shaft diameters range from 16 to 40 mm, and leads range from 16 to 40 mm. Custom lengths are available. Suitable for high-precision positioning, rotary drives, and other automation equipment. The model code specifies thread direction, shaft diameter, lead, number of ball circuits, manufacturing code, accuracy grade, spline shaft accuracy and type, length, preload grade, and number of thread starts.

Single-axis robot

Single-axis robot

The single-axis robot combines the advantages of TBI MOTION linear guides and ball screws. Its integrated nut-and-slider design, paired with an optimized, high-rigidity U-shaped rail profile, saves space and significantly reduces assembly time. The ball raceways feature two rows of Gothic-arch profiles with a 45° contact angle, allowing the unit to withstand loads in four directions and operate in any X, Y, or Z axis orientation. It is suitable for linear-motion applications in automation equipment and offers high rigidity, precision, and load capacity.

KP Series Single-Axis Robot

KP Series Single-Axis Robot

The KP Series single-axis robot combines a ball screw with a linear guideway in a modular design for easy installation and replacement. Its compact size and high rigidity make it a reliable choice for demanding applications. The 45° ball-to-screw contact angle provides equal load capacity in four directions, allowing radial, reverse-radial, or side mounting. The U-shaped rail, optimized with Ansys, is lightweight yet highly rigid. Accuracy is available in precision (P), high (H), and normal (N) grades, with repeatability of up to ±0.003 mm. Available sizes include KP26, KP33, and KP46. Depending on the model, lead options are 2, 5, 10, and 20 mm, and rail lengths range from 150 to 940 mm. Optional accessories include an aluminum dust cover, limit switch, and motor mounting flange. The model code comprises the nominal model, size, lead, nut type, carriage length, number of carriages, rail length, accuracy grade, motor, motor mounting flange, dust cover, and limit switch. Maximum travel speed reaches 1,480 mm/sec, depending on the model and lead.

Jinde (Jinyan) T-Type Lead Screw Nuts

Jinde (Jinyan) T-Type Lead Screw Nuts

Jinde (Jinyan) T-type lead screw nuts are trapezoidal lead screw nuts used with T-type trapezoidal lead screws to convert rotary motion into linear motion. They are suitable for light-duty drive applications in woodworking machinery, packaging equipment, lifting platforms, and more. Screw outer diameters range from 16~40mm, with three pitch options: P4, P5, and P6. All have a pressure angle of 30 degrees. Nut dimensions are specified as outer diameter×length, such as Ø29×20, Ø34×25, Ø37×25, Ø44×25, Ø47×25, Ø49×25, and Ø54×25. Each nut must be matched to a screw of the corresponding diameter. Screw lengths are available in 250, 300, 350, 400, 500, 600, and 1000mm; extended lengths of 1500mm and 2000mm are also available for screws with outer diameters of 20mm and above. To select a model, first determine the screw outer diameter based on the load, then select the matching nut model according to the pitch (P4/P5/P6) and nut outer diameter×length.

Square-Thread Lead Screw

Square-Thread Lead Screw

The square-thread lead screw (rectangular-thread lead screw) is a sliding lead screw made from 45# steel. Its rectangular thread profile provides transmission efficiency and wear resistance between those of ordinary threaded screws and ball screws. It is commonly used for low-speed, heavy-load linear motion in machine tool feeds, lifting mechanisms, woodworking machinery, packaging equipment, and automation equipment. The catalog specifies diameter and length: nine diameters of 20, 24, 30, 34, 36, 40, 45, 50, and 60 mm, and nine lengths of 250, 300, 350, 400, 500, 600, 1000, 1500, and 2000 mm. Order using the format “diameter×length”; the default unit is mm. A black-oxide-finished 45# steel trapezoidal-thread lead screw is also available in the same series. We maintain a large inventory and can manufacture non-standard diameters and lengths to customer drawings.

45# Steel Trapezoidal Lead Screw (Black Oxide)

45# Steel Trapezoidal Lead Screw (Black Oxide)

The 45# steel trapezoidal lead screw (black oxide) is a power transmission component used to convert rotary motion into linear motion. The catalog lists diameters of 20, 24, 30, 34, 36, 40, 45, 50, and 60 mm, and lengths of 250, 300, 350, 400, 500, 600, 1000, 1500, and 2000 mm. It is made of 45# steel with a black oxide surface treatment. Orders are specified as “diameter×length” in mm; both dimensions must be specified when selecting a product. Listed alongside square-thread lead screws, it is suitable for general mechanical transmission and positioning applications.

FX Series Motorized Stages

FX Series Motorized Stages

The FX series comprises standard motorized X-axis stages with linear ball guides, ball screw drives, and aluminum alloy platforms. They are suitable for precision single-axis positioning and reciprocating transfer in automated equipment. Three platform sizes are available: 40×40mm, 60×60mm, and 80×80mm, corresponding to the model prefixes FX40, FX60, and FX80. Different drive and guide configurations, such as GBNR, LBN, and LBNR, can be selected to suit travel and installation requirements. The standard accuracy grade is N. Cable outlets are available on the left (L) or right (N), and the motor wiring can be supplied without a connector (N) or with a D-SUB15 (VGA) connector. Standard mounting features on the platform include 4-φ3.4 through holes, 4-φ6 counterbores 5.5 deep, and 8-M3 threaded holes 5 deep, enabling direct attachment of the driven tooling. The ball screw drive provides high positioning accuracy and repeatability and supports high-frequency reciprocating motion. When selecting a model, confirm the platform size, effective travel, cable outlet direction, motor type, and connector type.

FX Series Linear Modules

FX Series Linear Modules

The FX series consists of linear modules manufactured by FARAY AUTOMATION. Models are identified by frame size, with common models including FX60, FX80, FX100, and FX120, corresponding to cross-sectional widths of approximately 60/80/100/120mm. They meet linear motion requirements ranging from light to medium-heavy loads. The -LBN suffix is a factory configuration code denoting a standard combination of options, such as guide type, drive mechanism, or mounting and protection features. The series is suitable for linear transfer, positioning, and pressing operations in automated equipment and can be driven by servo or stepper motors. Select the model based on cross-sectional dimensions, effective stroke, load, and speed requirements, then use the configuration suffix to specify the structural combination.

FY Series Linear Modules

FY Series Linear Modules

FARAY FY series linear modules feature an aluminum alloy profile body. B denotes a ball screw drive, suitable for linear positioning and handling mechanisms in automation equipment. The model table defines codes including material L (aluminum alloy), drive B (ball screw), precision N, cable outlet R/L (right/left), motor N (two-phase stepper)/X (not included), and connector D (D-SUB15/VGA). The examples cover FY40 and FY80 sizes, which can be selected according to available space and load requirements. Refer to the corresponding drawings to confirm travel, lead, and mounting dimensions.

FY Series Linear Modules

FY Series Linear Modules

FY series linear modules (linear slides) are grouped by base size. The catalog lists four sizes: FY60, FY80, FY100 and FY120. The number corresponds to the module's base/guide cross-sectional width in mm, covering applications from light-load precision positioning to medium- and heavy-load handling. A short suffix distinguishes configurations within each size. The configuration code shown on this catalog page is LBN, denoting the standard configuration for that size. When selecting a module, use the base size to determine the load and rigidity range, then use the suffix to determine details such as stroke, drive type, motor mounting orientation and protection type. Different configurations of the same size share the same mounting interface dimensions, making it easier to standardize equipment structures.

FX Series Electric Linear Stages

FX Series Electric Linear Stages

The FX series electric linear stage is a precision single-axis linear module integrating a ball screw drive and a two-phase stepper motor. It is designed for positioning, handling, dispensing, inspection, and other automation applications. The series is available in two sizes, FX60 and FX80. Its steel transmission unit uses a ball screw drive (B) for high rigidity, low backlash, and smooth operation. Motor options include a two-phase stepper motor (N) or no motor (X). Cable exit options are right (R) or left (L), and a D-SUB15 (VGA) connector (D) is available. The model code combines “FX+size” with “transmission unit(G)+accuracy grade(B)+motor type(N),” as in FX60-GBN and FX80-GBN.

FY-GBN Series Linear Modules

FY-GBN Series Linear Modules

The FY-GBN series is a range of linear modules (linear actuators) from FARAY AUTOMATION. The catalog includes FY40-GBN, FY60-GBN, and FY80-GBN models in three cross-section/frame sizes of 40/60/80 mm, meeting linear motion requirements for different strokes and loads. The series is grouped by frame size, and the suffix “GBN” identifies the structural type. Different drive and mounting configurations are available, along with variants such as FY60-GBNR-ND. These products are suitable for linear handling, positioning, and pressing in automated equipment and can be paired with drive units such as servo and stepper motors.

FXS Series Motorized Linear Stage

FXS Series Motorized Linear Stage

The FARAY FXS Series standard motorized X-axis stage features a linear ball guide and ball screw drive. It has a 50×50mm table, 20/30mm travel, and a ball screw with an 8mm diameter and 1mm lead. The stainless steel body has an electrolytic silver-plated finish, weighs approximately 0.57/0.72kg, and uses an FAMCS11.6-5*5 coupling. Accuracy grade N denotes the standard type, and wiring direction N denotes standard wiring. Full/Half step resolutions are 5μm/2.5μm, respectively, with a maximum full-step speed of 20mm/s. It is suitable for precision linear positioning and short-travel mechanisms in automated equipment.

FXS Series Precision Stages

FXS Series Precision Stages

FXS Series precision stages use a ball screw drive (8 mm screw outside diameter, 1 mm lead) and linear ball guides. Two platform sizes are available, 60×60 mm and 60×80 mm, with travel ranges of 20 mm, 30 mm, and 50 mm. The stage body is made of stainless steel with an electroless nickel finish and weighs approximately 0.8 kg. Suitable for precision positioning applications where size and weight are critical, these stages provide high-precision, short-travel feed for automated assembly, inspection, dispensing, and optical adjustment equipment. The standard connector is D-SUB, and the standard cable exit is not designated as left or right. Please specify separately if an HRS connector is required for the stage wiring. Consult the specification table for the relevant travel range to confirm the accuracy grade, resolution (Full/Half), maximum speed, unidirectional positioning accuracy, repeatability, load capacity, lost motion, parallelism, and straightness of travel.

FXN/FXC Series Electric Linear Stages

FXN/FXC Series Electric Linear Stages

FARAY standard electric single-axis stages (linear stages) combine recirculating ball linear guides with a ball screw drive unit. They are used in automated equipment for precision linear positioning, dispensing, screw fastening, inspection, material handling, and other applications. The model uses a six-character code: material S stands for stainless steel, drive unit B stands for ball screw, the precision grade is represented by one letter, wiring type N indicates standard wiring, motor type N indicates a two-phase stepper motor and X indicates no motor, and connector type D indicates a D-SUB15 (VGA) connector. There are two model types, FXN and FXC, with 50100 as a common size code (e.g., FXN50100-SBNN-ND and FXC50100-SBNN-ND). The stages have a compact design, and the travel, motor, and connector configurations can be selected to suit equipment requirements, making them suitable for a wide range of factory automation linear motion applications.

FXN/FXC Series Linear Stages

FXN/FXC Series Linear Stages

The FXN/FXC series comprises FARAY standard electric X-axis linear stages with recirculating ball guides and ball screw drives, designed for precise linear positioning in factory automation. Model numbers consist of a base model and codes for material, drive unit, accuracy grade, wiring type, motor type, and connector type: material S denotes stainless steel; drive B denotes a ball screw; accuracy N denotes standard grade; wiring N denotes standard wiring; motor options are N for a two-phase stepper motor or X for no motor; and connector D denotes D-SUB15 (VGA). Catalog examples include FXN50100-SBNN-ND and FXC50100-SBNN-ND.

FXN/FXC Series Ball Screw Linear Modules

FXN/FXC Series Ball Screw Linear Modules

The FXN/FXC series comprises precision linear modules driven by ball screws. Their bodies are made of stainless steel, with common frame sizes of 60 and 80 and travel lengths of 50mm and 100mm. Modules are ordered using a multi-part code that specifies the material, drive unit, accuracy grade, cable exit, motor type, and connector type in sequence, as in FXN60100-SBNN-ND and FXC8050-SBNN-ND. Motor options are a two-phase stepper motor (N) or no motor (X); connector options are D-SUB15 (VGA) or no connector. These compact, rigid modules provide consistent positioning accuracy and are commonly used for precision linear positioning in automated applications such as electronics assembly, semiconductor equipment, inspection, and material handling.

FX N/C 60-SBN Series Recirculating Ball Linear Motion Stages

FX N/C 60-SBN Series Recirculating Ball Linear Motion Stages

The FARAY FX N/C 60-SBN series comprises standard motorized linear motion stages with a recirculating ball drive. The stage measures 60×60 mm and is 60 mm high. Its stainless steel body has a chrome-plated finish. Two configurations are available: type N (body weight approximately 1.8 kg) and type C (approximately 1.94 kg). The stage does not include a driver and requires an external motor and controller. Resolution is 10 µm/5 µm, with travel ranging from 30~300 mm. Common standard travel lengths are 150/200/250/300 mm; short-travel options include 30/50/75/100 mm, with travel increasing in 50 mm increments. Model numbers follow the format FX+N/C+60+travel-SBNN-ND-P2. Catalog photographs also show FXN60100-SBNN-ND and FXC60100-SBNN-ND. Applications include automated electronics assembly, inspection, dispensing, and small-scale precision positioning.

FYN/FYC Series Motorized XY Stages

FYN/FYC Series Motorized XY Stages

The FYN/FYC series consists of standard motorized XY stages with recirculating linear ball bearings. Made of stainless steel and driven by ball screws, they are suitable for precision two-axis positioning and reciprocating motion in automated equipment. The model code specifies the material, drive unit, accuracy grade, wiring configuration, motor type, and connector type. The examples on this page have a size code of 5075, standard accuracy, standard wiring, a choice of a two-phase stepper motor or no motor, and a D-SUB15 (VGA) connector. FYN and FYC denote different configurations and can be selected according to equipment space and drive requirements.

FYN/FYC Series Precision Stages

FYN/FYC Series Precision Stages

The FYN/FYC series comprises precision motorized stages with a 60×60mm platform. The stainless steel body is treated with electroless nickel plating, and the drive uses an 8mm outside diameter ball screw with a choice of P1(1mm) or P2(2mm) lead. The guide uses recirculating linear ball bearings, and a two-phase stepper motor is included as standard. A D-SUB15(VGA) connector is optional; the connecting cable (2m/4m, with loose wires at one end) and FAMCS11.6-5*5 driver are sold separately. Standard travel ranges are 30 / 50 / 75mm. Resolution (full step/half step) is 5/2.5µm(P1) and 10/5µm(P2), with maximum speeds of 20mm·s⁻¹(P1) and 40mm·s⁻¹(P2). Unidirectional positioning accuracy is 15µm, and repeatability is ±1µm. Body weight ranges from 2.2~2.88kg depending on travel; the FYC model weighs approximately 0.38kg more than the FYN with the same travel. Suitable for micron-level feed and positioning in precision measurement, optical adjustment, semiconductor, and automation equipment.

FY N/C 80□-SBN Series Motorized XY-Axis Linear Stage with Recirculating Ball Bearings

FY N/C 80□-SBN Series Motorized XY-Axis Linear Stage with Recirculating Ball Bearings

The FARAY FY N/C 80□-SBN series is a standard motorized XY-axis linear stage with recirculating ball bearings. It features an 80-size body and an 08 ball screw drive, with a choice of 1mm or 2mm lead. The stage uses linear recirculating ball guides and is made of stainless steel with an electrolytic nickel-plated finish. Standard travel is 30/50/75mm, with resolution of 5/2.5μm (1mm lead) or 10/5μm (2mm lead), maximum speed of 20/40mm/sec, unidirectional positioning accuracy of 15μm, and repeat positioning accuracy of ±1μm. The standard N-type body weighs approximately 3.0~3.68kg, while the C-type weighs approximately 3.58~4.06kg. It is suitable for automated equipment requiring precision linear positioning on two XY axes.

FZV Series Linear Modules

FZV Series Linear Modules

The FARAY FZV series of linear modules includes models such as FZV4006, FZV6008 and FZV8010, with configurations including GCN and GCNN-ND. The listed mechanical specifications include table sizes of 40×40 mm and 60×60 mm, and mounting hole types such as 4-M4 through holes and 4-Ø4.5× through holes. These modules are suitable for linear motion, positioning and handling mechanisms in automated equipment. Table size, mounting holes and configuration can be selected by model code. Model codes consist of FZV + size number + configuration suffix. Specific stroke, accuracy and load ratings should be confirmed against the complete catalog.

FR Series Motorized Linear Stages

FR Series Motorized Linear Stages

The FARAY FR Series motorized linear stages are precision linear modules driven by stepper motors. They are available in four platform sizes—FR39, FR59, FR80, and FR100—to cover light- to medium-load applications. Mechanical specifications include travel, drive mechanism, guide rail, stage material and surface treatment, body weight, resolution (pulses), maximum speed (full-step), unidirectional positioning accuracy, repeatability, load capacity, free play, parallelism, running concentricity, and running parallelism. Electrical specifications include driver brand/model, connectors, stage-side and controller-side connectors, travel home sensor, travel limit sensor, supply voltage, control output, and output control. The standard version operates on DC+24V, and the male connector pinout includes motor leads A/B, stage travel ORG1 output, and ground. These stages are suitable for precision positioning, handling, and inspection stations in automated equipment.

FR-LDN Series Linear Modules

FR-LDN Series Linear Modules

The FR-LDN series comprises linear modules/linear motion units listed in the FARAY AUTOMATION catalog. This page presents three models: FR59-LDN, FR80-LDN, and FR100-LDN, with sizes distinguished by the numbers 59, 80, and 100 in their model identifiers. They are suitable for automated mechanisms requiring reciprocating linear motion. Parameters such as stroke, lead, rated load, repeatability, and motor mounting method are not detailed on this page. Consult the complete catalog and consider actual operating conditions when selecting a model.

Standard Electric Linear Stage

Standard Electric Linear Stage

The FARAY standard electric linear stage is a single-axis linear motion actuator commonly used in factory automation. A servo or stepper motor drives a lead screw, moving the stage back and forth along a guide rail. The catalog discusses six-axis mounting applications, focusing on axial accuracy and travel. These stages can be used individually or combined into multi-axis configurations, such as six-axis Cartesian robots or positioning platforms. Axial accuracy and effective travel are the two key parameters to consider during selection. Models are configured using codes for stage specifications (cross-sectional dimensions and screw lead), travel length, motor and controller configuration, protective features, and mounting accessories. Users can select combinations to meet their load, speed, and repeatability requirements.

FX-A Series Electric Linear Stages

FX-A Series Electric Linear Stages

The FARAY FX-A series of standard electric linear stages is available in three sizes: 80, 100, and 120. This page provides electrical interface and wiring definitions. The male connector includes motor leads A/B, CWLS/CCWLS limit outputs, the stage travel origin output ORG1, the motor rotation origin output ORG2, a DC+24V power input, and ground. Unused pins are also listed. The series is suitable for automated equipment with an external drive/controller, and the pin definitions simplify motor, limit, origin, and power wiring and troubleshooting. For mechanical travel, lead, load capacity, and mounting dimensions, refer to the mechanical specifications for the relevant model.

FY-A Series Electric Linear Slides

FY-A Series Electric Linear Slides

The FY-A series electric linear slides are available in three sizes: 80, 100, and 120. This page focuses on the electrical specifications of the standard model, which uses a male connector, and provides pinout and wiring diagrams. The 16-pin interface includes motor leads A/B, CWLS and CCWLS limit outputs, a motor rotation ORG2 output, a slide travel ORG1 output, a DC+24V power input, DC 0V, and ground. Unused pins are clearly left unassigned. The wiring definitions cover power, motor drive, and limit/home signals between the host controller and the slide, facilitating machine wiring and motion control integration.

FARAY Standard Electric Linear Slide

FARAY Standard Electric Linear Slide

The FARAY standard electric linear slide is a single-axis linear motion actuator for factory automation. It operates on DC 24V and uses a 15-pin male connector for motor leads and signal connections. Wiring includes four A/B motor leads, CWLS/CCWLS forward and reverse limit outputs, an ORG1 slide travel origin output, an ORG2 motor rotation output, power inputs (DC+24V / DC 0V), and ground. A PLC or motion controller can be connected for position feedback and limit protection. The slide supports two-phase and five-phase stepper motors from Taiwanese and Japanese manufacturers, including Oriental Motor and SANYO, classified into mounting groups A/B/C/D. Motors have a rated current of approximately 0.67~2.3A, a step angle of 1.8°/0.72°, and a maximum energized holding torque of 0.06~0.58 N·m. Optional drivers include GTR22G-D, GTR24M3, and CVRD518-K. It is suitable for automated applications requiring precise reciprocating positioning, such as electronics assembly, dispensing, material handling, and inspection.

FAG Series Electric Slides

FAG Series Electric Slides

The FAG series is a standard electric slide range from FARAY AUTOMATION. This page defines the electrical specifications for the series. The slide uses a 15-pin male connector: Pins 1–4 are the A/A/B/B two-phase motor winding leads, Pin 6 is the CWLS (clockwise limit) output, Pin 7 is the CCWLS (counterclockwise limit) output, Pin 9 is the DC+24V power input, Pin 10 is the ORG1 slide travel origin output, Pin 11 is DC 0V, and Pin 12 is ground. Pins 5, 8, and 13–15 are unused. The timing diagram shows the operating relationships among the slide travel slot block, CW/CCW limits, origin sensor, hardware limits, and motor, and is used to wire the host controller for homing and limit protection. When selecting and wiring the slide, check the pin assignments against the wiring diagram to avoid reversing the power and signal connections. All travel lengths in the series share the same electrical specifications.

SCI Series Ball Screws

SCI Series Ball Screws

The COMTOP SCI series ball screw catalog lists 15 standard models with nominal diameters d=16~80 mm, leads of 4~10 mm, ball diameters of 2.381~6.35 mm, nut outer diameters of 30~105 mm, and nut lengths of 40~85 mm. The table also lists dimensions and load parameters including L1, L2, M, R, n, Ca, Coa, and K; n is 4 for all models. Models marked ★ can be made with left-hand threads. These ball screws are suitable for automated drive applications that convert rotary motion into linear motion. Select a model based on diameter, lead, mounting dimensions, and dynamic and static loads.

SFS Series High-Speed, Low-Noise Ball Screws

SFS Series High-Speed, Low-Noise Ball Screws

The SFS series consists of high-speed, low-noise ball screws with screw and nut configurations conforming to DIN 69051 FORM B. They are suitable for applications requiring high rotational speeds, low noise, and low vibration, such as CNC machine feed axes, automated assembly lines, semiconductor and electronics equipment, and precision measurement platforms. The nut incorporates an oil hole for connection to a centralized lubrication system or grease supply line, helping maintain a lubricating film and reduce temperature rise and noise during high-speed reciprocating motion. The catalog presents dimensions in a dimension table. Selection is typically based on nominal outside diameter, lead, nut type, overall screw length, thread length, and accuracy grade. Engineering selection also requires verification of the DN value, critical speed, permissible axial load, and buckling stability. The catalog content on this page primarily provides the table structure and model designation (SFS / DIN 69051 FORM B); refer to the complete catalog pages or manufacturer drawings for specific dimensions and individual models.

DFS Series High-Speed, Low-Noise Ball Screws

DFS Series High-Speed, Low-Noise Ball Screws

The COMTOP DFS series consists of high-speed, low-noise ball screws with a flanged nut design conforming to DIN 69051 FORM B. An oil hole on the nut end face facilitates centralized oil supply and routine lubrication. Designed for low noise, high rotational speeds and low vibration, the series is suitable for high-speed machine tool feeds, injection molding machines, automation equipment and other applications requiring fast response and quiet operation. The nut flange conforms to DIN 69051 international standard mounting dimensions, allowing interchangeability with various support units and nut housings. As this page is a catalog specification sheet, refer to the relevant specification table for nominal diameter, lead, stroke and accuracy grade. Models are generally selected based on the combination of nominal diameter, lead and accuracy grade.

SFV Series High-Speed, Heavy-Duty Ball Screws

SFV Series High-Speed, Heavy-Duty Ball Screws

The SFV series is COMTOP’s range of high-speed, heavy-duty ball screws. Designed for applications involving both high speeds and substantial axial loads, the series features optimized ball recirculation paths and nut interiors to increase critical speed and DN values while reducing operating noise and heat buildup. It combines high-speed responsiveness with load-bearing rigidity, making it suitable for high-speed reciprocating applications with heavy loads, including CNC machine tool feed axes, injection molding machines, dedicated automation machinery, and handling and positioning systems. Key selection parameters include screw outside diameter, lead, overall screw length, thread length, accuracy grade, nut type (including flanged or cylindrical designs and oil port configuration), and axial clearance or preload grade. The catalog provides dimensional tables listing dynamic and static load ratings and nut mounting dimensions for each diameter and lead combination. The required stroke and shaft-end machining must be determined from the applicable drawings.

DFV Series High-Speed Heavy-Duty Ball Screws

DFV Series High-Speed Heavy-Duty Ball Screws

The COMTOP/TBI DFV series consists of high-speed, heavy-duty ball screws with multi-turn recirculation and optimized groove geometry. They are designed for automated equipment and machine tool feeds requiring high speed, high rigidity, and heavy cutting. Nominal diameters range from 15~80 mm, with leads of 5/10/20 mm, ball diameters of 3.175/6.35/9.525 mm, and 2.7~7.6 ball turns. The model code is DFV+nominal diameter (3 digits)+lead (2 digits)-number of turns (e.g., DFV04010-4.8). The specification table provides reference data including nut flange dimensions, dynamic load rating Ca, static load rating Coa, and rigidity K. Left-hand threads are also available. Applications include CNC machine tools, precision positioning stages, injection molding machines, and various high-speed, heavy-duty drive mechanisms.

SFI Series Ball Screws

SFI Series Ball Screws

The SFI series comprises COMTOP ball screws with nominal diameters of 16, 20, 25, 32, 40, 50, 63, and 80 mm; leads of 4, 5, and 10 mm (including a 5.08 mm option); ball diameters of 2.381~6.35 mm; and 3 or 4 circuits. They are suitable for automation equipment, precision positioning, and linear motion. The table lists dynamic load ratings of 640~5620 kgf, static load ratings of 1249~21300 kgf, and stiffness of 15~90 kgf/μm. Models marked ★ can be manufactured with left-hand threads.

DFI Series Ball Screws

DFI Series Ball Screws

The DFI series consists of flanged, internally recirculating ball screws with 4 ball circuit turns inside the nut. Nominal diameters are 16, 20, 25, 32, 40, 50, 63, and 80 mm, with leads of 4/5/10 mm and ball diameters of 2.381~6.35 mm. The nut has a flange and an M6/M8 oil hole for easy lubrication and maintenance. Dynamic load ratings range from 640~5620 kgf, static load ratings from 1340~21300 kgf, and stiffness from 35~162 kgf/μm. These ball screws are suitable for automation equipment, machine tool feeds, precision positioning mechanisms, and other applications requiring high-rigidity, low-backlash linear motion. Models marked ★ can be manufactured with left-hand threads.

SFU Series Ball Screws

SFU Series Ball Screws

COMTOP SFU series ball screws are rolled, flanged ball screws conforming to DIN 69051 FORM B, suitable for general motion and positioning applications. Specifications cover nominal diameters d12~d100 mm, leads of 4~20 mm, ball diameters of 2.381~9.525 mm, nut outside diameters D24~150 mm, flange diameters A40~202 mm, flange thicknesses B10~30 mm, overall nut lengths L40~180 mm, flange mounting hole diameters X4.5~17.5 mm, flange heights H30~155 mm, M6 or M8 oil hole threads, and 3 or 4 ball circuits n. Basic dynamic load ratings Ca range from 593~9420 kgf, and basic static load ratings Coa range from 1129~39183 kgf. Sizes marked ★ can be manufactured with left-hand threads; rolled-grade sizes such as d32 and d40 are regularly stocked.