Linear Motion Accessories — Page 20

WSL12 Bridge Cable Carrier, Non-Openable

WSL12 Bridge Cable Carrier, Non-Openable

The WSL12 series bridge-style cable carrier has a non-openable design and is made of black PA6+GF30. Operating temperature: -20°C to 120°C. It protects cables up to 16 mm in diameter. The pitch is 31.1 mm, with 33 links per meter. Installed height: H1 = H + 23 mm (at a load of 0.5 kg/m). The inner width is 18 mm, and the inner height is available in 25 mm and 37 mm. Choose from bend radii R28, R38, and R48. Style B is non-openable. Connector type: A. When ordering, specify the length (in meters or number of links) and connector type.

WSL13 Bridge Cable Carrier

WSL13 Bridge Cable Carrier

This 18-series bridge-type cable carrier is available in two styles: externally opening (WSL13) and internally opening (WSL13N). It is suitable for cables with a diameter of less than 16 mm. The inner width is 18 mm, the inner height is 20 mm, and the pitch is 35 mm, with approximately 29 links per meter. Multiple bend radii are available, including R28, R38, and R48. The chain length is calculated using S/2+K, where S is the travel distance and K=πr+ a safety allowance. The actual installation height is H1+H+23.5 mm (at a load of 0.5 kg/m). Cable carrier connectors are sold as a complete set (moving end + fixed end). Made of engineering plastic, they are lightweight and wear-resistant, and are widely used to protect cables in automation equipment.

WSL13N Series Cable Drag Chain

WSL13N Series Cable Drag Chain

The WSL13N series is an inward-opening bridge-type drag chain in the 18 series. It has an inner width of 18 mm, an inner height of 20 mm, a pitch of 35 mm, and 29 links per meter. It is suitable for cables with a diameter of less than 16 mm. Drag chain connectors are sold as a complete set, including moving-end and fixed-end connectors. Bend radii are R28, R38, and R48 (corresponding to connector models 20C, 25C, and 37C), plus an outward-opening style (model 50C). The installation height is H1+H+23.5 mm (with a load of 0.5 kg/m). Chain length calculation: S/2+K, where S is the travel distance and K=πr+R×safety allowance.

WSL16 Series Cable Drag Chain

WSL16 Series Cable Drag Chain

The WSL16 series bridge-type cable drag chain is made of engineering plastic and protects and guides cables with diameters under 19 mm. It is available in three styles to suit different installation spaces: side-opening (L type), inner-opening (N type), and outer-opening (W type). The pitch is 46 mm, with 22 links per meter. Calculate the chain length using S/2 + K, where S is the travel and K = π × R + allowance. The actual installed height is H₁ = H + 35 mm (at a load of 0.5 kg/m). The standard WSL16 has an inner width of 20 mm, an outer height of 35 mm, and a selectable bend radius of 25–65 mm. The WSL16XN-21 subseries has an inner width of 15–50 mm, an outer height of 28.2 mm, and a bend radius of 28–75 mm. The WSL16XW-21 has an inner width of 15–50 mm, an outer height of 27.5 mm, and a bend radius of 28–55 mm. Cable chain connectors are sold as a complete set (moving end + fixed end). For fixed-end connector specifications, see the catalog.

WSL17 Series Bridge-Type Cable Carrier (Open on Both Sides)

WSL17 Series Bridge-Type Cable Carrier (Open on Both Sides)

The WSL17 series is a size 25 bridge-type cable carrier with an open design on both sides. It protects and guides moving cables and hoses on machine tools, automation equipment, and similar applications. The links are made of black PA6+GF30 nylon and operate at temperatures from -20°C to 120°C. The inner width is fixed at 25 mm, with several bend radii available (25/38/46/50/57/77/103 mm) to suit different installation spaces. The number of links per meter is calculated from the pitch (1000 ÷ pitch). Cable carrier connectors are sold as a set (moving end + fixed end) and must be selected separately. When ordering, specify the model, length (in meters or number of links), and connector model, for example, WSL17-25-25-R40L. Suitable for medium-load applications, the product offers good wear and corrosion resistance.

WSL17W Bridge-Type Cable Carrier, Outside-Opening

WSL17W Bridge-Type Cable Carrier, Outside-Opening

The WSL17W series bridge-type cable carrier features an outside-opening design and is made of black PA6+GF30. Operating temperature: -20°C to 120°C. Inner height: 25 mm; inner width: 25 mm. Available bend radii: 25 mm, 33 mm, 50 mm, 57 mm, 77 mm, and 103 mm. Pitch: 46 mm; 22 links per meter. Suitable for cables up to 22 mm in diameter. Cable carrier end brackets are sold as a complete set (moving end + fixed end).

WSL18 Series Cable Drag Chain

WSL18 Series Cable Drag Chain

The WSL18 is a Series 25 enclosed cable carrier with openings on both sides for easy cable installation and maintenance. It is made of PA6+GF30 (nylon 6 with 30% glass fiber), is black, and has an operating temperature range of -20°C to 120°C. It protects cables with diameters under 22 mm from bending and is commonly used with connectors. The carrier pitch is not specified, but is typically the same as that of other models in the series.

WSL19 Series Cable Drag Chain

WSL19 Series Cable Drag Chain

WSL19 Series multicolor bridge-type drag chain with openings on both sides, made of PA6+GF30 and finished in black. Suitable for ambient temperatures from -20°C to 120°C. The number of chain links per meter is calculated from the pitch. Connectors are sold as a set (including moving and fixed ends). An alternative hole spacing of B=B1+12 is available. This compact series is wear- and heat-resistant and is widely used to protect cables in automated equipment.

WSL22 Series Multicolor Bridge-Type Cable Carrier

WSL22 Series Multicolor Bridge-Type Cable Carrier

The WSL22 Series is a size 30 multicolor bridge-type cable carrier with an inner width of 30 mm. Its open-sided design allows cables to be installed quickly. Made from engineering-grade plastic, it is wear-resistant, corrosion-resistant, and UV-resistant. Multiple bend radii are available (25 mm / 38 mm / 50 mm / 57 mm / 75 mm / 77 mm / 100 mm / 103 mm) to suit different space requirements. The fixed connector features a C-shaped design for secure, convenient installation. The outer height is 45 mm; the outer width varies with the bend radius, and the hole diameter is 18 mm. Operating temperature range: -40°C to 80°C. Suitable for industrial applications such as machine tools, robots, and automated production lines.

WSL23 Bridge-Type Cable Carrier, Open on Both Sides

WSL23 Bridge-Type Cable Carrier, Open on Both Sides

The WSL23 series bridge-type cable carrier is suitable for cables with a diameter of 32 mm or less. It is made of PA6+GF30, is black, and operates at temperatures from -20°C to 120°C. The pitch is 63 mm, with 16 links per meter. The inner width is 35 mm. Available bending radii are 50, 60, 75, 90, 100, 125, 130, 150, 200, 250, and 300 mm. Cable carrier connectors are sold as a complete set (moving end + fixed end). The actual installation height is H1 = H + 55.4 mm (at a load of 1 kg/m). Chain length calculation: L = S/2 + K, where K = π × R + safety allowance. Fixed connector types are available, and hole spacing can be customized.

WSL25 Series Multicolor Bridge-Type Cable Carrier

WSL25 Series Multicolor Bridge-Type Cable Carrier

The WSL25 series is a multicolor bridge-type cable carrier in the 35 series. Both sides can be opened. It has an inner height of 35 mm, an outer height of 73 mm, an outer width of 83 mm, and an aperture of 66 mm. It is available in 12 specifications with bend radii ranging from 50 to 300 mm. The style is R60 and it comes with fixed connectors. Suitable for protecting cables on CNC machine tools, automated equipment, and more. Custom lengths are available on request.

WSL26 Multicolor Enclosed Cable Carrier

WSL26 Multicolor Enclosed Cable Carrier

The WSL26 is a multicolor enclosed cable carrier in the 35 Series. Its side-opening design makes it easy to install and maintain the cables and tubing inside. Made from PA6+GF30 (nylon 6 with 30% glass fiber), it is black and offers excellent mechanical strength and wear resistance. With an operating temperature range of -20°C to 120°C, it is suitable for most industrial automation environments. Accessories include dedicated connectors for secure mounting and connection. The series has an interior height of 35 mm, and the bend radius can be selected to suit your needs (refer to the 50–300 mm bend-radius range of the WSL25 in the same series). It is ideal for guiding and protecting moving cables in confined spaces.

WSL27 Series Bridge-Type Cable Carrier

WSL27 Series Bridge-Type Cable Carrier

The WSL27 Series Bridge-Type Cable Carrier features an open design on both sides for easy cable routing. It is made of PA6+GF30 (nylon 6 reinforced with 30% glass fiber), is black, and has an operating temperature range of -20°C to 120°C. Suitable for machine tools, automation equipment, and other applications requiring cable and hose protection. The number of links per meter depends on the pitch (pitch not specified). Cable carrier connectors are sold as a complete set (moving end + fixed end).

WSL28 Series Cable Carrier

WSL28 Series Cable Carrier

WSL28 series bridge-type cable carrier with a 45 mm inner width and opening on both sides. Made of PA6+GF30 in black, it operates at temperatures from -20°C to 120°C. Available with a range of bend radii from 50 mm to 200 mm and supplied with dedicated connectors, it protects moving cables and hoses in automated equipment.

WSL29 Series

WSL29 Series

The WSL29 Series colorful open-type cable carrier belongs to the 45 Series. It has an inner width of 45 mm, an inner height of 50 mm, an outer height of 65 mm, and an outer width of 66 mm. Available bend radii are R75, R100, R125, R200, R250, and R315 mm. The carrier opens on both sides and is made of reinforced PA6 nylon with 30% glass fiber (PA6+G30). It operates at temperatures from -20°C to 120°C. Designed to protect cables and hoses in motion on automation equipment, it offers high strength, wear and corrosion resistance, and smooth operation. Connectors are available, and the length can be customized by the meter or by the number of links.

WSL30 Series Cable Drag Chain

WSL30 Series Cable Drag Chain

The WSL30 is a multicolor enclosed drag chain in the 45 Series, featuring an open design on both sides for easy installation and maintenance. Made of PA6+G30 reinforced nylon, it offers high strength and wear resistance. It is black and suitable for temperatures from -20°C to 120°C. Connectors are included to protect cables and hoses in industrial automation equipment. Its compact design ensures smooth operation, making it suitable for medium- to high-speed applications.

WSL36 Series Cable Drag Chain

WSL36 Series Cable Drag Chain

The WSL36 series is a colorful bridge-type cable carrier in the 65 series, with openings on both sides. It is suitable for machine tools, automation equipment, and other applications where moving cables and hoses need protection. Made of PA6+GF30, it is black and operates within a temperature range of -20°C to 120°C. The inner width B1 is 65 mm, and the outer height H2 is 85 mm. Available bend radii R include 50, 60, 75, 100, 150, 175, and 200 mm. Fixed connectors are included, with an 8.8 mm hole diameter. Multiple connector specifications are available to meet different installation requirements. When ordering, specify the model, inner width, bend radius, length (in meters or links), and connector type.

WSL37 Multicolor Bridge-Type Cable Carrier

WSL37 Multicolor Bridge-Type Cable Carrier

The WSL37 multicolor bridge-type cable carrier features an open-on-both-sides design, ideal for rapid cable routing and high-speed motion. Inner width B1 = 80 mm, with bend radii from R150 to R250 mm. Made of PA6+GF30, it is black and rated for temperatures from -20°C to 120°C. Its compact pitch, light weight, low operating noise, and resistance to wear and corrosion make it a reliable choice. It can be used with connectors. Links per meter = 1000 ÷ pitch. Connectors are sold as a complete set.

WSLG.02 Series Cable Carrier Accessories

WSLG.02 Series Cable Carrier Accessories

The WSLG.02 Series heavy-duty spine system is designed for cleanroom cable carriers (such as the WWC.28.65) and is suitable for light loads and short travel distances. The spine system includes components such as spine connectors (LG.28.02M/F), horizontal separators, vertical separators, and integrated cable dividers. It significantly increases the cable carrier’s unsupported span (900–1500 mm) and prevents cables from tangling or rubbing against each other. Its patented tensile-resistant design ensures stable operation without coming apart. Made of TPU, it offers heat resistance and wear resistance, with an antistatic option available. When selecting a system, consider the internal compartment layout of the cable carrier and ensure that cables and hoses occupy no more than 70% of the available space.

WSLG45F Steel-Reinforced Cable Carrier, Size 45, Bridge-Type Series

WSLG45F Steel-Reinforced Cable Carrier, Size 45, Bridge-Type Series

The WSLG45F steel-reinforced cable carrier, size 45, bridge-type series, is designed for long-travel applications. Its steel-reinforced construction prevents sagging, making it suitable for protecting and guiding cables and hoses on automation equipment. It has an inner width of 45 mm, an outer height of 67 mm, and an 8 mm hole diameter. A range of bend radii (50–200 mm) and corresponding outer widths is available to suit different installation spaces. The fixed connector is type C, with openings on both sides (L) for easy cable routing. Connector models are available for various bend radii, such as WSLG45F-45-50C through WSLG45F-45-175C. Orders can be customized by specifying the base model, length, and connector type. Designed for high-speed reciprocating motion in industrial environments, it offers high strength and durability.

WSLG65F Fully Enclosed Steel-Supported Cable Carrier

WSLG65F Fully Enclosed Steel-Supported Cable Carrier

The fully enclosed Steel-Supported Cable Carrier 65 series is designed to protect cables over long distances. Built-in steel support components reinforce the structure, allowing unsupported spans of up to 5 m without sagging. Suitable for cables up to 60 mm in diameter, it has a 71.9 mm pitch and 14 links per meter. The actual installation height is H1 = H + 86.2 mm (load: 2.2 kg/m). Various bend radii (50–200 mm) and internal widths are available; the internal height is fixed at 65 mm. Openings are provided on both sides.

WSLG65Q Series Heavy-Duty Cable Carrier

WSLG65Q Series Heavy-Duty Cable Carrier

The steel-reinforced 65 bridge-type cable carrier series is designed for long-distance applications. Integrated steel reinforcement provides added structural support, preventing sag over a 5 m span. It has an inner height of 45 mm, inner widths ranging from 65 to 300 mm, bend radii from 50 to 300 mm, and a pitch of 71.9 mm (14 links per meter). It is suitable for cables up to 60 mm in diameter. Connector models in this series are designated WSLG65Q-45-XXC, where XX denotes the bend radius in millimeters.

WWC.22.40 Cleanroom Cable Carrier

WWC.22.40 Cleanroom Cable Carrier

The WWC.22.40 series cleanroom cable carrier is designed for light loads and short travel applications. Its internal compartment system supports horizontal and vertical separators or integrated cable dividers (such as WWC.22.40.FGP and WWC.22.40.PGPLG) to keep cables neatly arranged. Made of TPU, the carrier is available in white, black, and custom colors. It supports speeds of ≤5 m/s and acceleration of ≤3 g, operates at 30±5°C and 45±15% relative humidity, and comes with an 18-month warranty. Its service life is ≥15 million cycles. Antistatic and flame-retardant options are available on request. The matching comb plate, model WWC.22.40.SZB, is used with the connector to prevent cables from tangling or rubbing against one another.

WWC.28.65 Series Cable Carrier

WWC.28.65 Series Cable Carrier

The WWC.28.65 Series cleanroom cable carrier (conduit) is made of TPU, with an inner height of 28 mm and an inner width of 65 mm, and is suitable for cleanroom environments. Operating speed is unspecified; acceleration is ≤3 g. Operating temperature is 30±5°C, and operating relative humidity is 45±15. The warranty is 18 months, and the service life is ≥15 million cycles. It can be fitted with an integrated cable separator (WWC.28.65.FGP) and a heavy-duty support bar (WSLG.02.R70) to divide the interior space for cables. The fixed-end bend radius is available in 60 mm (minimum) or 70 mm (recommended). The connector comes with a comb plate to prevent cables from tangling. Its new patented design prevents separation under tension. Suitable for light-load, short-stroke automation equipment.

WWC.40.110 Series Cable Carrier

WWC.40.110 Series Cable Carrier

The WWC.40.110 series cleanroom cable carrier is designed for light loads and short-stroke applications. It has an internal area of 4,000 mm², with cables and hoses occupying no more than 70% of the interior. Made of TPU, it is available in white, black, and custom colors. Operating speed: ≤? m/s; acceleration: ≤3 g; operating temperature: 30±5°C; relative humidity: 45±15%. It comes with an 18-month warranty and a service life of at least 20 million cycles. Optional accessories include dividers (SZB), connectors (Type C), a keel system (WSLG.03.R70), and an integrated cable separator (GFP). Available bend radii are 100 mm and 130 mm, and the travel length can reach 1,800 mm.

XR10 Series

XR10 Series

XR10 Series linear bearing support units are designed for 10 mm shafts and feature high-precision bearings (model 7000) and a BF10 support end. Available in two widths, 57 and 60, with different mounting hole spacing, they are suitable for precision linear motion systems. The compact design is easy to install and supports multiple coupling interfaces (30-428-5/30-428-4).

XR15 Series Linear Guide Rails

XR15 Series Linear Guide Rails

XR15 series linear guide blocks feature a high-precision ball recirculation design and a 15 mm shaft diameter. Multiple mounting sizes are available, including models XR15-57, XR15-60, XR15-80, XR15-86, and XR15-90. The blocks are 66.7–100 mm wide, 98–108 mm long, and 48 mm high, and are equipped with a BF15 support end and a 7002 bearing. They are suitable for linear motion systems in automation equipment, precision drives, industrial robots, and other applications. Their high rigidity, low friction, and smooth operation meet a range of load and travel requirements.

XR20 Series Support Blocks

XR20 Series Support Blocks

The XR20 series support block is a support unit for linear guides, with a 20 mm shaft diameter and three width options (80/86/90 mm) to suit different installation spaces. It uses a high-precision 7004 bearing and supports the BF20 fixed end for smooth operation. Key dimensions include an overall length of 131 mm, a width range of 90–100 mm, and a height of 60 mm. Weighing approximately 2.6 kg, it is suitable for precision transmission applications such as automation equipment and machine tools. Its mounting holes are laid out for easy installation. The coupling specifications are 45-55Φ17-19/14/20, accommodating different output shaft requirements.

XR35 Series Linear Guide Support Unit

XR35 Series Linear Guide Support Unit

XR35 series support units are designed for linear drive systems with a 35 mm shaft diameter. The high-rigidity aluminum alloy housing comes fitted with bearings, oil seals, locknuts, and other components to provide stable axial support. The mounting center distance is 130 mm. Available in three versions to suit different applications: standard (XR35-130), B type (XR35-130B), and reduction type (XR35-130 Reduction).

XR40 Series Motor Mount

XR40 Series Motor Mount

The XR40 Series Motor Mount is designed for motors with a 40 mm shaft diameter. It features a high-precision 7208 bearing and supports the BF40 support-end model. Three mounting-hole thread sizes are available to suit different motor flanges: M8 (XR40-130), M10 (XR40-150), and M12 (XR40-180). Overall length is 223 mm, height is 110 mm, base height is 60 mm, and weight is approximately 15 kg. Use with a matching coupling from the 65-90 Φ35 series. Its sturdy construction makes it well suited to connecting motors to lead screws or drive shafts in automation equipment.

XSVR01210-01 Series Ball Screw

XSVR01210-01 Series Ball Screw

The XSVR01210-01 series is a precision ball screw with a ball center distance of 12.85 mm, ball diameter of 2.5 mm, lead of 10 mm, 2.7×1 ball circuits, a lead angle of 13.91°, and a right-hand helix. Spring force is 0.1–0.2 kg, preload is 25 kgf, dynamic load Ca is 411 kgf, static load Coa is 638 kgf, and the precision grade is 0.018. The catalog offers five travel lengths: 100/150/250/350/450 mm, with the corresponding nominal model numbers XSVR01210B1DGC5-230-P1, XSVR01210B1DGC5-280-P1, XSVR01210B1DGC5-380-P1, XSVR01210B1DGC5-480-P1, and XSVR01210B1DGC5-580-P1, respectively. Suitable for linear transmission in precision positioning, CNC machine tools, and automation equipment.

XSVR01510-00 Series Ball Screw

XSVR01510-00 Series Ball Screw

The XSVR01510-00 series ball screw has a ball center distance of 15.5 mm, a ball diameter of 3.175 mm, a lead of 10 mm, 2.7 × 1 ball circuits, a lead angle of 11.6°, and a right-hand thread. Spring force is 0.1–0.3 kg, preload is 38 kgf, dynamic load is 611 kgf, static load is 950 kgf, and the precision grade is 0.018. Stroke lengths range from 100 to 800 mm across multiple nominal models. Screw shaft lengths L1, L2, and L3 are specified, and shaft center runout meets requirements. Suitable for precision linear feed applications in automation equipment, machine tools, semiconductor equipment, and other settings.

XSVR01520-01 Series Ball Screw

XSVR01520-01 Series Ball Screw

The XSVR01520-01 series consists of ball screws that use recirculating steel balls for transmission. They are suitable for automation equipment, machine tools, and various linear motion systems. The series features a ball center distance of 15.5 mm, a ball diameter of 3.175 mm, a lead of 20 mm, a lead angle of 22.33°, and a right-hand helix (R). The number of ball turns is 1.8 × 1; the spring force is 0.1–0.3 kg; the preload is 38 kgf; the dynamic load rating Ca is 580 kgf; the static load rating Coa is 875 kgf; and the precision grade is 0.018. Available strokes range from 100 to 800 mm, with different screw shaft lengths. The nominal model designation follows the format XSVR01520A1DGCS-[three digits]-P1, where the three-digit code corresponds to the screw shaft length L3. For example, a 100 mm stroke corresponds to -271-, and an 800 mm stroke corresponds to -971-.

XSVR02010-00 Series Ball Screw

XSVR02010-00 Series Ball Screw

The XSVR02010-00 series ball screw has a nominal ball-center diameter of 21.35 mm, a ball diameter of 3.969 mm, a lead of 10 mm, 2.7 × 1 ball circuits, an 8.48° lead angle, and a right-hand thread. The preload is 43 kgf, the spring force is 0.1–0.3 kg, the dynamic load rating is 977 kgf, the static load rating is 1732 kgf, and the precision rating is 0.018. The stroke range is 200–1000 mm, corresponding to a screw shaft length (L3) of 399–1199 mm and shaft runout of 0.035–0.110 mm. The model is designated in the format XSVR02010B1DGC5-overall length-P1. It is suitable for applications requiring high-precision feed transmission, including CNC equipment and automated machinery.

XSVR02020-00 Series Ball Screw

XSVR02020-00 Series Ball Screw

The XSVR02020-00 series is a right-hand ball screw assembly with a nominal lead of 20 mm, a ball diameter of 3.175 mm, 1.8 × 1 ball turns, and a helix angle of 17.05°. It has a preload of 31 kgf, a dynamic load rating of 649 kgf, a static load rating of 1,134 kgf, and an accuracy of 0.018 mm. Standard strokes range from 200 to 1,000 mm. Corresponding model numbers include XSVR02020A1DGC5-399-P1 and XSVR02020A1DGC5-499-P1. The screw shaft length increases with the stroke, and the shaft runout ranges from 0.035 to 0.110 mm. This series is mainly used in precision transmission and in linear positioning and feed mechanisms in automation equipment.

XSVRO2010 Series Ball Screw

XSVRO2010 Series Ball Screw

The XSVRO2010 series ball screw linear module features a 20 mm screw diameter, a 10 mm lead, C5 accuracy, and a single-nut design. Multiple stroke lengths are available (200–1000 mm in 100 mm increments), each corresponding to a different screw shaft length. The model code format is XSVRO2010B1DGC5-length-P1, where length is the screw shaft length in mm and corresponds to the stroke as follows: a 200 mm stroke corresponds to a length of 399 mm, a 300 mm stroke to 499 mm, and so on. Suitable for automation equipment, precision positioning, and other applications.

XSVRO2020-00 Precision-Ground Series

XSVRO2020-00 Precision-Ground Series

The XSVRO2020-00 precision-ground ball screw series features finished shaft ends and delivers high-precision motion. It is suitable for automation equipment requiring precise positioning. Refer to the catalog dimension table for detailed specifications.

XSVRO2020 Precision-Ground Ball Screw with Finished Shaft Ends

XSVRO2020 Precision-Ground Ball Screw with Finished Shaft Ends

The XSVRO2020 is a precision-ground ball screw with shaft ends machined to standard specifications for direct installation. It is suitable for automation equipment, machine tools, precision positioning stages, and other applications requiring high-precision linear motion. Key specifications include accuracy grade, outer diameter, inner diameter, length, pitch, and pitch deviation. As the dimensional data on the catalog page is incomplete, please refer to the full catalog or the manufacturer's technical documentation for the exact outer diameter, inner diameter, length, pitch, and other specifications.

XYFB21 Series Linear Guide Rail

XYFB21 Series Linear Guide Rail

The XYFB21 Series Linear Guide Rail is available in four sizes, with A dimensions of 50 mm, 65 mm, 75 mm, and 100 mm; the corresponding B dimensions are the same. A1 and B1 dimensions vary slightly. Height H ranges from 12 mm to 16 mm. Mounting hole dimensions: D = 6 mm, d = 12.5 mm or 13 mm, and d1 = 6.5 mm. Load capacity ranges from 30 kg to 80 kg, and the reference weight is 0.11–0.59 kg per piece. Suitable for automation equipment, mechanical transmission, and other applications.

XYFC46 Series

XYFC46 Series

The XYFC46 series is a linear motion component available in four sizes: 60, 60A, 60B, and 60C. Dimensions such as A1, A2, A3, A4, D, D1, d, and d1 vary by size. The load capacity is 4.5–5.5 kg, and the approximate reference weight is 15 kg/pc. Suitable for automation equipment requiring compact support or guidance.

XYFG02 Series Linear Guide Blocks

XYFG02 Series Linear Guide Blocks

The XYFG02 series linear guide blocks are available in a range of sizes (40, 47, 50, 60, 63A, 65, 75, and 100 mm) to suit different load and application requirements. The blocks are made from high-quality steel, offering high rigidity, precision, and a long service life. Variants include the standard model (XYFG02), the specially protected model (E-XYFG02), and the corrosion-resistant model (J-XYFG02). Key dimensions include width (A), length (B), mounting-hole spacing (A1, B1), height (H), thickness (T), and mounting-hole diameters (D, d, d1). Load capacity ranges from 30 to 40 kg. These blocks are suitable for precision motion applications in automation equipment, machine tools, electronics manufacturing, and other fields.

XYFM86 Series

XYFM86 Series

The XYFM86 Series is a linear motion component for industrial automation, available in two load ratings: 75 kg (reference weight: 65 kg) and 100 kg (reference weight: 85 kg). It is suitable for applications requiring high-precision linear motion, such as automation equipment and robotics. Its compact design and high load capacity meet a range of application needs.

XYFQ31 Series Medium-Load Linear Guide Rail

XYFQ31 Series Medium-Load Linear Guide Rail

The XYFQ31 Series medium-load linear guide rail is made of SUS304 stainless steel and features an N-angle surface treatment. Designed to guide linear motion under medium loads, it is available in sizes 16 and 25 to suit a range of installation requirements. Suitable for automation equipment, precision machinery, and other applications.

XYFQ46 Series Medium-Load T-Type Slide Rail

XYFQ46 Series Medium-Load T-Type Slide Rail

The XYFQ46 Series medium-load T-type slide rail is made of SUS304 stainless steel and is suitable for linear motion systems with medium loads. The series is available in two sizes, 16 and 25 (possibly referring to slider width), and features corrosion resistance and high rigidity. Specify the series and size when ordering.

XYFT66 Series Linear Guide Blocks

XYFT66 Series Linear Guide Blocks

XYFT66 series linear guide blocks are designed for precision linear motion applications in automation equipment, machine tools, and similar settings. Available in sizes 60 and 80, they offer different mounting dimensions and load capacities. Made from high-quality steel, the blocks feature high rigidity and a long service life. With a load capacity of 6 kg and a lightweight design, they are suitable for high-speed, light-load applications. Precise mounting-hole spacing, height, length, and other dimensions allow them to be used with compatible guide rails.

XYFT71 Series Linear Guide Rail

XYFT71 Series Linear Guide Rail

The XYFT71 Series Linear Guide Rail, size 48, is available with 4-hole and 6-hole mounting options and is suitable for precision linear motion applications. Main dimensions: A = 48 mm, B = 48 mm, A1 = 48 mm, B1 = 32 mm, L1 = 30 mm for the long-shaft type and 22 mm for the short-shaft type, and H = 17 mm. It features a lightweight design and high load capacity, with a reference load of 5.5 kg and a weight of 5 kg per piece. It is widely used in automation equipment, CNC machine tools, electronics manufacturing, and other fields.

XYFT73 Series

XYFT73 Series

XYFT73 Series slider blocks for linear guide systems. Available with 4- or 6-hole mounting. Key dimensions: A = 59 mm, B = 62 mm, A1 = 59 mm, B1 = 42 mm, L1 = 37 mm for the long-shaft type and 29 mm for the short-shaft type, and H = 24 mm. Suitable for linear motion applications with medium loads. These compact slider blocks offer flexible mounting options and are widely used in automation equipment, precision machinery, and other applications.

XYFT75 Series

XYFT75 Series

The XYFT75 Series consists of linear guide rail blocks for use in automation equipment, industrial machinery, and other applications. These blocks feature a compact design, with mounting dimensions A = 70 mm, B = 80 mm, A1 = 70 mm, and B1 = 47 mm. L1 is 43 mm for the long-shaft type and 34 mm for the short-shaft type. The height H is 29 mm, and the mounting holes measure D = 12.2 mm, d = 3 mm, and d1 = 10.6 mm. The rated load is 6.5 kg, and the reference weight is 6 kg. Made from standard steel, the blocks provide stable linear-motion guidance.