Linear Motion Accessories — Page 21

XYFT77 Series Linear Guide Block
The XYFT77 Series linear guide block is suitable for automation equipment, precision machinery, and other applications. Made from high-quality steel, it offers high rigidity and stability. Key mounting dimensions: A = 66 mm, B = 36 mm, A1 = 66 mm, B1 = 21 mm, H = 26 mm. Available with two shaft lengths: long-shaft type (L1 = 25 mm) and short-shaft type (L1 = 31 mm). Load capacity: approximately 5.5 kg; weight: approximately 0.05 kg. Mounting holes are available in 4-hole and 6-hole layouts, making the block compatible with a range of guide rail systems.

XYFT81 Series Miniature Linear Guide Blocks
XYFT81 Series miniature linear guide blocks are available in four sizes: 35, 51, 60, and 80. Designed for high-precision linear motion under light loads, they feature dimensions including A (width), B (length), B1, H (height), T (thickness), L1, and L2. The mounting hole diameter d and countersunk hole diameter d1 vary by size. Maximum load capacity is 2 kg for sizes 35 and 51, and 6 kg for sizes 60 and 80. Each block weighs just 0.01–0.05 kg, making it suitable for light-load applications with strict space and weight requirements, such as precision instruments, medical equipment, and semiconductor equipment.

XYFV51 Series Miniature Linear Guide Blocks
The XYFV51 Series miniature linear guide blocks feature a compact design for precision automation equipment. The series is available in three sizes (A dimension): 40 mm, 50 mm, and 75 mm, each with a different load capacity. The block body width (B) ranges from 35 to 50 mm, and the overall height (H) is 1.5–2 mm. The mounting hole spacing (A1) matches the width. Made from high-quality steel, the blocks have a rated load of 3–4.5 kg and are lightweight (6–15 g/pc), making them suitable for high-speed, light-load applications. Typical uses include semiconductor equipment, precision measuring instruments, and electronics assembly lines, where space and weight are critical constraints.

XYGA31 Series Linear Slide Block
The XYGA31 Series is a medium-load linear slide block made of SUS304 stainless steel, designed to guide linear motion in automation equipment. It is available in a range of specifications to suit different load capacities and mounting dimensions. Slide widths (W) include 39 mm, 53 mm, and 62 mm options to fit different rails. The surface is deep-ground and polished to ensure precision and durability.

XYHAL-510A Series
The XYHAL-510A Series comprises support components commonly used in industrial automation. It is available in four versions (60, 60A, 60B, and 60C) and in a range of body sizes, with load capacities from 4.5 kg to 5.5 kg and a unit weight of 15 kg/pc. The products feature mounting-hole dimensions such as D, D1, d, and d1, and are suitable for mounting and supporting linear guides or sliding mechanisms.

XYKL14 Series
XYKL14 series slider block, dimensions: L=100 mm, L1=118 mm, W=17 mm, H=33 mm, B=8 mm, mounting hole diameter d=7 mm, and counterbore diameter d1=12 mm. The series offers a variety of surface finishes, including nano matte, black electrophoretic coating, and chrome plating (corresponding to the XYLS514 series). Suitable for precision linear motion systems, with standardized mounting hole positions.

XYLS514 Series
The XYLS514 Series is a factory automation component comprising five models (XYLS514-1 through XYLS514-5), which differ mainly in material and color. Model XYLS514-3 is made of zinc alloy; the materials of the other models are not specified. The available finishes are nano matte, electrophoretic black, and chrome-plated. The series may be used for precision positioning or sliding support. Its compact size and range of surface finishes make it suitable for different operating environments. Specific mechanical dimensions are not listed on the page.

XYS430-A Two-Axis Linear Module
The XYS430-A is a two-axis (XY) linear module driven by a ball screw. It uses a PCH12 axis for the X-axis and a PCH10 axis for the Y-axis. Its compact design is suitable for precision positioning in a plane. It offers a repeatability of ±0.01 mm, a ball screw lead of 20 mm and a maximum speed of 1000 mm/s, and is equipped with a 100 W AC servo motor. Standard travel ranges from 100~1050 mm for the X-axis and 50~550 mm for the Y-axis, both in 50 mm increments. The operating environment is 0~40°C and below 85%RH. It can be paired with a servo drive for multipoint positioning and is widely used for XY planar positioning in handling, dispensing, assembly and inspection applications in the electronics, semiconductor and automotive parts industries.

XYS430-A1 Series XY Linear Modules
The XYS430-A1 is a precision linear module with a dual-axis (XY) configuration, an aluminum extrusion body, and built-in XY cable chains. It is suitable for automated applications requiring two-dimensional positioning, such as electronics assembly, inspection, and dispensing. Standard X-axis travel ranges from 100~1050 mm in 50 mm increments. Overall length L varies linearly with travel (L = travel + 380 mm), while the number of mounting holes M and hole diameter N increase in stages as travel increases (M from 0 to 5 and N from 6 mm to 16 mm). The catalog specifies a maximum operating speed of 1000 mm/min. The table has 4-M5×15 threaded mounting holes and a 2.5×15 locating slot. Key overall dimensions are 90/100/105/130/138/143 mm. When selecting a model, consult the table for L, A, M, N, and the corresponding maximum speed based on the required travel.

XYS650 Series Linear Modules
The XYS650 series linear module, base model XYS650-A1, is a linear motion unit for factory automation. X-axis travel ranges from 100~1050 mm in 50 mm increments, with a corresponding overall length L of 490~1440 mm. The maximum operating speed is 1000 mm/s. Depending on the stroke, the mounting and overall dimension parameters are A: 50~1000 mm, M: 1~3, and N: 6~8. It is suitable for medium- to long-stroke, high-speed handling and positioning applications. When selecting a model, check the L, A, M, and N dimensions against the stroke.

YKK40 Series Linear Modules
The YKK40 series comprises linear modules (linear slides) with extruded aluminum bodies. The catalog uses carriage configuration, rail length and overall length as the main selection criteria. The series offers A1 (single-carriage) and A2 (dual-carriage) configurations to suit different load and travel requirements. The catalog also specifies carriage spacing G (mm) and number of carriages n as mounting and selection parameters, along with rail length L2 and overall length L1 (both in mm). These dimensions help determine the travel and mounting clearance at both ends within a limited installation space. When selecting a module, confirm the carriage configuration (A1/A2), rail length L2 or overall length L1, required effective travel, drive method and mounting orientation. Effective travel is generally shorter than the rail length, as the carriage length and clearance for the end limits must be deducted. This page provides dimensional information; refer to other pages for the series to confirm specific travel specifications, load capacities and accuracy grades.

ZPTZ90-1 Series
The ZPTZ90-1 series comprises linear motion modules for industrial automation, featuring a fixed cross-sectional size and a range of stroke lengths. The compact design is suitable for applications such as precision positioning and material handling. See the catalog table for specific dimensions.

ZT16 Series
The ZT16 series includes two types: rolling ball-tip models (ZT16A) and toothed-surface screw models (ZT16B/ZT16C). The body is made of S45C, with a black-oxide finish and a hardness of HRC 28–32. The ball is made of SUJ2 and has a hardness of HRC 62. ZT16A is available in various sizes, such as 0408 and 0510, with different pitches and lengths. Maximum loads range from 2 to 235 kN, and weights range from 0.6 to 235 g. An example order code is ZT16A-0408. The toothed-surface screw series also includes the ZT20 model, made of SCM435 with a black-oxide finish and a hardness of HRC 32–38. The series is suitable for linear transmission in automated equipment.

ZT45 Support Foot Series
This series features ZT45 support feet made of S45C steel with a black oxide finish and a hardness of HRC 28–32. Multiple sizes are available, with thread sizes from M6 to M20 and lengths from 10 to 60 mm. Model numbers consist of “ZT45” followed by a four-digit suffix (e.g., ZT45-0610); the first two digits indicate the thread size and length combination. These feet provide mounting support in automation equipment.

ZT46 Serrated Screw Support Foot Series
This series of serrated end feet is designed for linear drives in automation equipment. The body is made of S45C steel, with a black-oxide surface finish and a hardness of HRC 28–32. A range of thread diameters from M6 to M20 is available, with lengths from 10 mm to 60 mm. Order using model number ZT46-XXXX; for example, ZT46-0610 indicates an M6 thread and a length of 10 mm.

ZT49 Series Support Blocks
ZT49 series guide shaft supports are made from S45C carbon steel with a black-oxide finish and a hardness of HRC 35. Designed to support guide shafts, they are available in a range of sizes. Length (B) ranges from 25 mm to 100 mm, while width (C) is fixed at 25 mm. Bore diameter (D) varies by series, including 4.8 mm, 7.6 mm, 9.9 mm, and 12.7 mm; mounting hole spacing (E), height (F), and slot width (G) also vary accordingly. Thread sizes include M6×1, M10×1.5, and M16×2.0. Weights range from 40 g to 275 g. An example order code is ZT49-06258. These supports are widely used in automation equipment and mechanical transmission systems.

ZZ90-1 Series
The ZZ90-1 Series is a linear guide or slide unit available in various lengths (such as L1 to L237). Each length designation corresponds to a value of 95 mm. The series may be used to support linear motion in automation equipment. Specific technical parameters and coding rules are not clearly provided on the supplied page.