Pneumatic Fittings — Page 8

BXG-PM Stainless Steel Straight Bulkhead Union
The BXG-PM stainless steel straight bulkhead union is a pneumatic push-in fitting designed to connect and secure tubing through a panel or bulkhead. Both ends have push-in tube connections for easy installation and maintenance. Its stainless steel body offers good corrosion resistance, making it suitable for food, packaging, pharmaceutical and other applications with high cleanliness requirements. It is available in 7 sizes for tubing with outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm. Both ends accept the same tube diameter for each model (e.g., BXG-PM4-4). The catalog provides A, B, C, D, E, L, L1 and other overall and mounting dimensions to assist with selection and mounting hole design.

BXG-PZ Stainless Steel Ferrule Push-in Straight Union
BXG-PZ series stainless steel ferrule push-in straight unions offer excellent corrosion resistance and durability. The ferrule locking mechanism enables quick tubing connections with a reliable seal. Suitable for tubing with an outer diameter of 4~16mm, the series ranges from BXG-PZ6-6 to BXG-PZ24-24 and is available in multiple sizes. The compact fittings are easy to install and can be connected and disconnected repeatedly. They are widely used in automation equipment, pneumatic control systems, water treatment and food processing machinery.

BXG-PK Stainless Steel Ferrule-Type Push-in Straight Bulkhead Fitting
The BXG-PK series is a range of stainless steel ferrule-type push-in straight bulkhead fittings manufactured by Shannaisi Automation and part of the BXG stainless steel push-in fitting family. Made from stainless steel (SUS304/316), these fittings resist corrosion, high pressure and aging, making them suitable for air, water and oil lines. The ferrule-type push-in design allows tubing to be connected and disconnected quickly without tools. The straight bulkhead design provides a connection through panels, partitions or enclosure walls, with push-in ports at both ends and a locknut to secure it to the partition. Compatible tubing outside diameters are 4, 6, 8, 10, 12, 14 and 16 mm. Connection thread sizes include M5~M24 and G1/8~G1/2. The working pressure is 0~1.0 MPa and the operating temperature is -20~80℃. These fittings are widely used in automation equipment, pneumatic control systems, packaging machinery, textile machinery and other applications.

BXG-PG Straight Reducing Union
BXG-PG series straight reducing unions (straight push-in reducing fittings) directly connect pneumatic tubing of two different outside diameters, such as nylon or PU tubing. One end connects to the larger tube and the other to the smaller tube, reducing the diameter of the air line. Supported tube outside diameters are 6, 8, 10, 12, and 14 mm, with reduced-end sizes of Φ4, Φ6, Φ8, Φ10, and Φ12. The overall body length L is 33 mm for all models; hex width across flats A is 12~20 mm, section B is 6~14 mm, section C is 2 mm for all models, D is 12.5~21 mm, bore diameter d is 10.5~19 mm, E is 4~12 mm, and F is 10~18 mm. The push-in design connects and seals the tubing when it is fully inserted. Press the release ring to disconnect without tools. Suitable for pneumatic piping in automation equipment, pneumatic fixtures, packaging machinery, and other applications.

BXG-PEG Reducing Tee Fitting
The BXG-PEG series consists of push-to-connect reducing tee fittings for pneumatic lines. They split one air line into two and connect tubes of different diameters. The push-to-connect design uses an internal retaining clip and O-ring to secure and seal the inserted tube, allowing tool-free installation and removal. This makes the fittings suitable for pneumatic piping that is frequently reconfigured. The catalog lists tube sizes including 6-6-Φ4, 8-8-Φ6, 10-Φ6, 10-Φ8, 12-Φ8, 12-Φ10, 14-Φ10 and 14-Φ12, along with overall and connection dimensions A, B, C, D, d, E, F and L in mm. The overall length L is generally 33 mm, allowing users to calculate installation space and clearance between adjacent fittings. The fittings are suitable for compressed air and can be used with nylon or polyurethane tubing. The same page also lists related pneumatic accessories, including BXG-PG straight reducing fittings and BXG-SL one-way flow control valves, for selecting components for a complete circuit.

SM Series Pneumatic Fittings
The SM series consists of pneumatic fittings with aluminum alloy bodies in three configurations: SM threaded straight, SH hose and PH compact. They connect and redirect air lines using PU or nylon tubing. The applicable fluid is air, with a proof pressure of 1.32 MPa (1.35 kgf/cm²), an operating pressure range of 0~0.9 MPa (0~9.2 kgf/cm²), and an ambient and fluid temperature range of 0~60℃. The body is made of aluminum alloy. Thread sizes include 1/8PT, 1/4PT, 3/8PT and 1/2PT, and hose sizes include 1/4, 5/16, 3/8 and 1/2 inches. The SM type has a connection diameter of 9.4~16.5 mm and an overall height of 50.2~57.3 mm; the SH type has an overall length of 66.8 mm; and the corresponding dimensions of the compact PH type are approximately 4.9~12.6 mm. Select a model based on equipment space and flow requirements.

SH Series Pneumatic Fittings
The SH series comprises aluminum alloy pneumatic fittings (straight hose connectors/barbed fittings) for connecting PU and nylon tubing in pneumatic systems. The fittings are made of aluminum alloy and use air as the working fluid. They have a pressure resistance of 1.32MPa(1.35kgf/cm²), a maximum operating pressure range of 0~0.9MPa(0~9.2kgf/cm²), and an ambient and fluid temperature range of 0~60℃. Four models are available by tubing size: SH-10, SH-20, SH-30, and SH-40, for 1/4HOSE, 5/6HOSE, 3/8HOSE, and 1/2HOSE hoses, respectively, with threaded connections of 1/8PT, 1/4PT, 3/8PT, and 1/2PT. The model suffixes 10/20/30/40 indicate tubing sizes. These fittings are widely used for air supply connections in automated equipment, pneumatic tools, and industrial piping. Other fitting series, including SM and PH, are listed on the same catalog page but belong to separate product categories and are not part of this series.

PH Series Pneumatic Fittings
PH series pneumatic hose fittings are made of aluminum alloy and are suitable for PU and nylon tubing. One end accepts an inserted hose (1/4HOSE, 5/6HOSE, 3/8HOSE, 1/2HOSE), while the other has a male PT thread (1/8PT, 1/4PT, 3/8PT, 1/2PT). Four sizes are available according to tubing diameter: PH-10, PH-20, PH-30, and PH-40. The working fluid is air, the proof pressure is 1.32MPa, the operating pressure range is 0~0.9MPa, and the ambient and fluid temperature range is 0~60℃. The catalog also provides external and mounting dimensions, including A, B, D, and H (overall length approximately 52.3~52.8mm), for tubing and installation design and selection.

KQ2 Series Push-to-Connect Pneumatic Fittings
The KQ2 series consists of push-to-connect (one-touch) pneumatic tube fittings with a release ring that allows the tube to be removed by pressing it. They are suitable for pneumatic piping systems using nylon (PA), polyurethane (PU), and other tubing. The series includes male threaded tee fittings (KQ2T), male threaded Y fittings (KQ2Y), and equal and reducing U fittings (KQ2U). Compatible tube outside diameters cover six sizes: Φ4, Φ6, Φ8, Φ10, Φ12, and Φ16. Threaded connections include M5×0.8 and M6×1.0 metric threads and 1/8, 1/4, 3/8, and 1/2 inch pipe threads. Equal-diameter (-00) and reducing (-06~-12) tube-to-tube connections are also available. Release rings are available in gray, blue, or black, and plastic bodies in gray or black.

KQ2 Series Push-In Fittings
The KQ2 series push-in fittings from Shannaisi Automation (Ningbo) Group Co., Ltd. include KQ2VD single-head two-port, KQ2VT single-head three-port, KQ2C single-sided, KQ2Z double-ended external hex, KQ2ZS double-ended internal hex, and KQ2ZF double-ended male-to-female threaded configurations. They fit pneumatic tubing with outer diameters of 4~78 mm, with multiple sizes listed in the catalog. Thread sizes include M5×0.8, M6×1.0, and 1/8, 1/4, 3/8, and 1/2 inch. Push-in installation and external or internal hex features facilitate fastening. The fittings are used for quick connection, branching, and adaptation in pneumatic lines.

KQ2 Series Push-in Pneumatic Fittings
The KQ2 series consists of push-in pneumatic fittings for quickly connecting polyurethane, nylon and other pneumatic tubing to threaded ports on cylinders, solenoid valves, air preparation units and other components. The tubing locks in place when inserted and can be removed by pressing the release collar, with no tools required. This page covers KQ2C single-ended fittings, KQ2VD single-head two-port fittings, KQ2VT single-head three-port fittings, KQ2Z double-ended external hex fittings, KQ2ZS double-ended internal hex fittings and KQ2ZF double-ended male-to-female threaded fittings. Compatible tube outside diameters are 4~16 mm (metric codes 04/06/08/10/12/14/16). Connection threads include metric M5×0.8 and M6×1.0, and pipe threads 1/8", 1/4", 3/8" and 1/2". Body external hex sizes cover 4/4.8/5/5.5/6/7 mm. Model numbers follow the format “base model+tube outside diameter code-connection thread size,” for example KQ2VD04-01S, KQ2ZS06-M5 and KQ2C04-01S. These fittings are widely used in pneumatic piping for automation equipment, pneumatic fixtures, assembly lines and packaging machinery.

KQ2 Series Pneumatic Push-to-Connect Fittings
KQ2 series pneumatic push-to-connect fittings provide quick connections between nylon or polyurethane tubing and pneumatic circuit components. The series includes three types: male threaded T fittings (KQ2T), male threaded U fittings (KQ2U), and male threaded Y fittings (KQ2Y). They accommodate six tube outside diameters: Ø4, Ø6, Ø8, Ø10, Ø12, and Ø16. The threaded side uses Uni threads, with connection sizes of 1/8", 1/4", 3/8", and 1/2". No tools are needed to install the tubing: simply insert it for a sealed, secure connection. To disconnect, press the release ring. The release ring is available in gray, blue, or black to help distinguish air lines by circuit. These fittings are suitable for tubing installations in automated equipment, pneumatic fixtures, packaging machinery, and other applications. To select a model, first choose the fitting type (T/U/Y), then combine the tube outside diameter and thread size to determine the complete model number.

KQ2D Series Male Branch Tee Fittings
KQ2D Series male branch tee fittings are push-in pneumatic fittings that provide a tee connection between one male threaded port and two tubing ports in compressed air lines. They typically consist of a brass body with a nickel-plated finish, seals, and release rings. The fittings allow tubing to be connected and disconnected quickly and are easy to install, making them suitable for automated equipment, pneumatic control cabinets, and general industrial air lines. The catalog presents this series alongside KQ2LU offset tee fittings, but this page does not provide a complete model and dimension table for KQ2D. Refer to the relevant specification page for tubing diameters, thread sizes, and overall dimensions.

KQ2E Series Bulkhead Fittings
KQ2E series bulkhead fittings, also known as panel-mount or threaded bulkhead fittings, are pneumatic push-to-connect fittings that provide a secure connection for tubing passing through a panel, enclosure, or partition. Each fitting includes a metric locknut. For installation, drill a panel hole using the formula “mounting hole diameter = nominal locknut thread size + 0.5mm,” then secure the fitting with the locknut from the back. Six tube outside diameters are supported: Φ4, Φ6, Φ8, Φ10, Φ12, and Φ16, with corresponding metric locknut threads M12×1, M14×1, M16×1, M20×1, M22×1, and M28×1.5. Fitting lengths range from 32.5~51mm. The model code consists of KQ2E + tube outside diameter code (04/06/08/10/12/16) + “-00”, for example KQ2E04-00. Release rings are available in gray, blue, or black.

KQ2F Series Female Straight Fittings
The KQ2F series consists of pneumatic push-in female straight fittings suitable for nylon, polyurethane and other pneumatic tubing. Model numbers combine the applicable tube outside diameter and female thread size. Common tube diameters are 4, 6, 8 and 10 mm, and connection threads include M5×0.8, 1/8 and 1/2. Fitting dimensions are designated by A, L, S and Φ. The fittings connect directly to female-threaded ports, are easy to install and are suitable for pneumatic systems in automated equipment.

KQ2H Series Equal-Diameter Straight Fittings
KQ2H series equal-diameter straight fittings (male straight/equal-diameter straight push-in fittings) provide quick connections between tubing and female-threaded ports or between tubes of the same diameter in pneumatic lines. Compatible tube diameters include 4, 6, 12, and 16 mm, with thread sizes including M5×0.8, M6×1.0, 1/8, 1/4, 3/8, and 1/2. The push-in design and release rings available in gray, blue, or black simplify tubing installation and maintenance. The catalog provides A, S, L, Φ, and other dimensions for checking installation clearances. These fittings are suitable for straight connections in automated equipment, pneumatic actuators, and air line systems.

KQ2L Series Male Straight Fittings
The KQ2L series consists of male straight push-to-connect (one-touch) pneumatic fittings. One end has a male thread (M5×0.8, M6×1.0, or 1/8", 1/4", 3/8", 1/2" pipe thread) for connection to a female threaded port or actuator, while the other end accepts tubing directly for pneumatic connections and quick replacement. The body is typically made of nickel-plated brass, with nickel plating on the threaded section for corrosion resistance. An internal O-ring and retaining clip grip the tubing, providing a reliable seal and easy insertion and removal for frequent assembly and maintenance. The catalog lists sizes by tube outside diameter and fitting thread. Tube sizes start at Φ4, and the fitting hex width across flats ranges from 4~14.2 mm, increasing with fitting size. The related KQ2W is an extended male-thread type, while the KQ2E is a bulkhead fitting. Both belong to the same fitting family and can be used for panel pass-throughs or to extend the threaded connection. Select the model according to the tube outside diameter and port thread size. For bulkhead fittings, machine the mounting hole to the locknut nominal thread size + 0.5 mm.

KQ2L Series Equal Elbow Fittings
KQ2L series equal elbow fittings are push-to-connect fittings that change the direction of airflow by 90° in pneumatic piping systems. Both ends connect pneumatic tubing of the same diameter, including nylon and polyurethane tubing. The push-to-connect design seals and locks the tubing upon insertion and allows easy removal. These fittings are widely used in automated equipment, pneumatic control circuits and other applications. Common tubing diameters include Φ4, Φ6, Φ8, Φ10 and Φ12, with housing colors including gray, blue and black. They feature a compact design, low flow resistance, reliable sealing and good pressure resistance.

KQ2LU Series Male Run Tee Fittings
KQ2LU series male run tee fittings are pneumatic push-to-connect fittings used to connect tubing in a run tee configuration to a female-threaded port. The series is available for tubing outside diameters of 4, 8, and 10 mm, with thread sizes including M5×0.8, M6×1.0, 1/8, 1/4, 3/8, and 1/2. The model suffix S indicates that sealant is applied. The push-to-connect design makes installation easy, and the fittings are suitable for pneumatic piping systems in industrial automation. Select a model based on the tubing outside diameter and connection thread size, and check compatibility with the operating pressure, temperature, and medium. The catalog lists parameters such as hex size, overall dimensions, and mounting hole diameter for each specification to help with piping layout and installation.

KQ2P Straight Connector
The KQ2P straight connector is a push-in fitting commonly used in pneumatic systems to connect tubing directly to a female threaded port. Its one-touch design makes installation easy and provides a reliable seal. The fitting body is typically made of nickel-plated brass, and the release ring is available in gray, orange-red, black, and other colors. Suitable tube outside diameters include 4, 6, 8, 10, 12, and 16 mm, with connection threads including M3, M5, M6, 1/8", 1/4", 3/8", and 1/2". The operating medium is air, with an operating pressure range of approximately 0–1.0 MPa and an operating temperature range of approximately -5–60°C. It is widely used in automation equipment, pneumatic control circuits, packaging machinery, and electronics manufacturing.

KQ2S Series Hex Socket Fittings
The KQ2S series consists of hex socket fittings (pneumatic push-to-connect fittings) used to connect pneumatic tubing to threaded ports. A hex key can be used for installation in confined spaces. Fittings are typically selected by tube diameter, thread size and other criteria. However, this page provides only the series name and fitting category; it does not list dimensional tables or model code combinations for specific KQ2S models. Refer to the complete catalog for detailed specifications.

KQ2T Series Tee Fittings
The KQ2T series consists of one-touch pneumatic tee fittings. The tubing locks automatically when inserted and can be removed by pressing the release ring. Release rings are available in gray, blue or black, and plastic bodies in gray or black. The series is divided into four types by construction: male threaded tee fittings (with M5×0.8 and M6×1.0 metric threads and 1/8, 1/4, 3/8 and 1/2 inch threads), equal tee fittings (port code -00), and tee fittings with a reducing branch (-06, -08, -10, -12). Compatible tubing outside diameters are Φ4, Φ6, Φ8, Φ10, Φ12 and Φ16. They are primarily used to branch and distribute compressed air and supply actuators in automated equipment. The model code is KQ2T + tubing outside diameter code - port code. Select the model according to the tubing outside diameter and thread size.

KQ2TW Series Four-Way Cross Fittings
The KQ2TW series consists of push-in four-way cross fittings for pneumatic systems, suitable for plastic air tubing with diameters of Φ4~Φ12. Equal-diameter (KQ2TWxx-00) and reducing (such as KQ2TW06-04 and KQ2TW08-06) versions are available. The fittings have plastic bodies, with release rings available in gray, blue, or black and bodies available in gray or black. The catalog lists the fitting outside diameter, length, and mounting hole spacing for each size, making it easy to split or combine airflow in compact pneumatic circuits.

KQ2TX Series Four-Way Cross Fittings with One Reduced Port
KQ2TX series four-way cross fittings with one reduced port are pneumatic push-to-connect fittings designed to provide multiple branches in pneumatic lines. Their push-to-connect design makes installation easy, and they are suitable for common industrial pneumatic systems. The catalog lists models KQ2TX06-04, KQ2TX08-06, KQ2TX10-08, and KQ2TX12-10, corresponding to tube sizes Φ6, Φ8, Φ10, and Φ12, with connector outside diameters of 4, 6, 8, and 10 mm, respectively. Connector lengths range from approximately 13.2~21.3 mm, and mounting hole pitches from approximately 40~57 mm. The fittings are available in gray, blue, or black, with plastic bodies available in gray or black. Select the appropriate model based on tube diameter, installation space, and branch size.

KQ2TY Series Two-Size Reducing Cross Fitting
The KQ2TY series two-size reducing cross fitting is a multi-branch component in the KQ2 series of push-in pneumatic fittings. It distributes compressed air from one line to multiple branches or combines airflow from multiple lines. Its four-way cross design connects tubes of different diameters to a single body, reducing the number of fittings required. The push-in locking mechanism seals the tube upon insertion without tools, making assembly and maintenance easier for automated equipment, pneumatic fixtures, and packaging machinery. The body is available in gray, blue, or black, and the plastic housing is available in gray or black. Check the complete model table for compatible tube diameters, fitting outside diameters, fitting lengths, and mounting hole spacing.

KQ2TZ Series Four-Way Cross Fitting with Three Reducing Ports
The KQ2TZ series four-way cross fitting with three reducing ports is a pneumatic push-in fitting designed for cross-branch connections in pneumatic tubing. Three ports accommodate different tube diameters. Its push-in design allows easy installation without tools. The plastic body is available in gray or black, and the release ring is available in gray, blue, or black. It is suitable for automated equipment, pneumatic control systems, and other applications. The specific tube diameter combination must be selected using the complete model code.

KQ2U Series U-Shaped Push-In Fittings
The KQ2U series U-shaped fitting is a push-in pneumatic tube fitting with a U-shaped (bridge-style) body. It routes and secures tubes in parallel along the mounting surface and is primarily used to connect tubing between cylinders, solenoid valves, and air preparation units. Mounting hole pitch B facilitates screw fastening. It accommodates five tube outside diameters: Φ4, Φ6, Φ8, Φ10, and Φ12. The push-in section is made of surface-treated C3604 brass. Release rings are available in gray, blue, or black, and plastic parts in gray or black. Related designs listed on the same page include the KQ2X reducing U-shaped fitting, KQ2UW extended U-shaped fitting, and KQ2XD five-way copper tube push-in fitting. Fitting lengths can be customized to customer requirements. Key dimensions are fitting outside diameter Φ, fitting length L, mounting hole pitch B, and reducing tube outside diameter Φd.

KQ2UD Series Five-Way Fittings
KQ2UD series five-way fittings are push-in fittings designed to split or combine flow in pneumatic lines. They are available in standard and male-threaded configurations; the male-threaded version can be installed directly via its thread. Compatible tube sizes include Φ4, Φ6, Φ8, Φ10, and Φ12 (the tube diameter range listed for fittings in the same group on this page). Release rings are available in gray, blue, or black, and plastic bodies in gray or black. These fittings provide quick tube connections in automated equipment and pneumatic control circuits, making installation and maintenance easy. Select the specific model based on the tube size and thread specification. The full KQ2UD ordering table is not provided on this page.

KQ2UW Series Extended U-Shaped Push-In Fitting
The KQ2UW series extended U-shaped fitting is a pneumatic push-in tube fitting designed for quick branching and connections in air lines. It fits five tube outer diameters: Φ4, Φ6, Φ8, Φ10 and Φ12. The corresponding fitting outer diameters range from Φ11~Φ21.3mm, fitting lengths L from 60.3~100.5mm, and mounting hole spacing B from 18~30mm. The push-in section is made of C3604 brass, and its length can be customized to customer requirements. Release rings are available in gray, blue or black, while plastic parts are available in gray or black. Easy to install and reliably sealed, these fittings are widely used in pneumatic piping systems for automated equipment.

KQ2V Series Single-End External Hex Fittings
The KQ2V series comprises single-end external hex push-in pneumatic fittings, a straight fitting type in the KQ2 push-in fitting family. One end has an external hex body for tightening with a wrench into a female threaded port; the other has a push-in connection. Once the tubing is inserted, internal gripping claws and an O-ring secure and seal it. Pressing the release ring allows the tubing to be removed quickly, without tools for connection or disconnection. These fittings are suitable for air lines in automation equipment and piping for cylinders and solenoid valves. The body and connection components are made of nickel-plated C3604 brass, providing good corrosion resistance and thread strength. The release ring is available in gray, blue or black, while the plastic parts are available in gray or black, allowing air lines to be color-coded. The series supports common tubing outside diameters of Φ4, Φ6, Φ8, Φ10 and Φ12, and the insertion length can be customized on request. The catalog page provides only the series title and material and color information, with no detailed specification table. Confirm the tubing outside diameter and mounting thread size when selecting a fitting.

KQ2VD Single-Thread Two-Branch Fitting
The KQ2VD series single-thread two-branch fitting is a pneumatic push-in fitting used to connect air tube branches to a threaded port. Its hexagonal body allows installation with a wrench, making it suitable for automated equipment, pneumatic control cabinets, and general air systems. The catalog lists tube outside diameters of 4, 6, 8, 10, 12, 14, and 16mm, with 1/8, 1/4, 3/8, and 1/2 inch thread sizes. It also provides installation dimensions such as hex A, H, and S. Select a model that matches the tube outside diameter and equipment port thread to ensure reliable sealing and smooth insertion and removal.

KQ2VF Series Single-Ended Internal Hex Fittings
KQ2VF series single-ended internal hex fittings are KQ2 series push-to-connect pneumatic tube fittings. Their internal hex design allows installation from the end face using a hex key, making them suitable for confined spaces where access from the side is difficult. They provide quick connection and disconnection between pneumatic tubing and threaded ports. The tube connection section is made of C3604 brass. Release rings are available in gray, blue or black, and plastic bodies in gray or black. Insertion length can be customized to customer requirements. Compatible tube outside diameters include common sizes such as Φ4, Φ6, Φ8, Φ10 and Φ12. Related variants include single-ended external hex fittings (KQ2V), U-shaped push-to-connect fittings (KQ2U), reducing U-shaped fittings (KQ2X), extended U-shaped fittings (KQ2UW) and five-way copper tube fittings (KQ2XD). They are widely used in pneumatic circuit piping for automated equipment.

KQ2VS Series Single-End Internal Hex Fitting
The KQ2 series consists of push-to-connect fittings for pneumatic piping. The featured model is the KQ2VS single-end internal hex fitting. The range also includes the KQ2V single-end external hex fitting, KQ2VF single-end internal hex fitting, KQ2U U-shaped fitting, KQ2X reducing U-shaped fitting, KQ2UW extended U-shaped fitting, and KQ2XD five-way copper tube fitting. Compatible tubing outer diameters are Φ4, Φ6, Φ8, Φ10, and Φ12 mm. Key dimensions include fitting outer diameter Φ, fitting length L, mounting hole pitch B, and reducing tube outer diameter Φd. The insertion section is made of C3604 brass. Release rings are available in gray, blue, or black, while plastic parts are available in gray or black. Insertion length can be customized to customer requirements. To install, simply insert the tube until it locks; to remove it, press the release ring and pull out the tube. These fittings are widely used for quick piping connections in automation equipment, cylinders, and pneumatic systems.

KQ2VT Single-Head Triple Fitting
The KQ2VT single-head triple fitting is a pneumatic push-to-connect fitting used to connect multiple air lines at a single point. Made of nickel-plated brass, it offers corrosion resistance and a reliable seal. It is suitable for fluids such as air and water, with a working pressure range of 0-1.0MPa and an operating temperature of 0-60°C. It accommodates various tube sizes (such as 4mm, 6mm, and 8mm) and threaded connections (such as M5×0.8, M6×1.0, 1/8", 1/4", and 3/8"). Easy to install, it is widely used in automation equipment, pneumatic control systems, and machinery manufacturing.

KQ2W Series Extended Equal Elbow Fittings
KQ2W series extended equal elbow fittings are pneumatic push-in fittings designed to connect and redirect air tubing of the same diameter with an extended reach. They feature high-quality engineering plastic bodies, reliable sealing, easy installation, and resistance to pressure and corrosion. The fittings are available in gray, blue, or black, while the plastic bodies are available in gray or black. Common tube sizes include Φ4, Φ6, Φ8, Φ10, and Φ12. They are suitable for automation equipment, pneumatic control systems, robotics, and other applications. To install, simply insert the tube into the fitting. To remove it, press the release ring and pull the tube out for simple, reliable operation.

KQ2X Series Reducing U-Shaped Push-In Fittings
The KQ2X series consists of reducing U-shaped push-in fittings, a type of one-touch pneumatic fitting used to connect two tubes of different diameters in a U-shaped configuration. Tubes can be quickly connected and disconnected without tools, making these fittings suitable for automated equipment, fixtures, cylinder piping, and other applications. Supported tube outer diameters are Φ4, Φ6, Φ8, Φ10, and Φ12, with corresponding models KQ2X04-06, KQ2X06-99, KQ2X08-99, KQ2X10-99, and KQ2X12-99. Fitting outer diameters range from Φ11~Φ21.3, fitting lengths from 51.5~100.5 mm, and mounting hole pitches from 18~30 mm. Compatible reducing tube outer diameters range from Φ4~Φ12. The push-in section is made of C3604 brass. Release rings are available in gray, blue, or black, and plastic parts in gray or black. Product length can be customized to customer requirements. The fittings are suitable for pneumatic piping systems using nylon, polyurethane, and other tubing.

KQ2XD Series Five-Way Brass Tube Push-in Fittings
KQ2XD series five-way brass tube push-in fittings are pneumatic quick-connect fittings used to combine or distribute multiple air lines, commonly in automated equipment. The series accommodates tubing with outside diameters of Φ4, Φ6, Φ8, Φ10 and Φ12 mm, with models including KQ2XD04-04, KQ2XD04-06 and KQ2XD06-99. Fitting outside diameters range from 4~12 mm, fitting lengths are approximately 48.8~65.2 mm, mounting hole spacing is 11~13.2 mm, and reducing tube outside diameters are 13.2~15.6 mm. The push-in section is made of C3604 brass and can be customized in length to customer requirements. Release rings are available in gray, blue or black, and plastic parts in gray or black.

KQ2Y Series Male Y-Fittings
KQ2Y series male Y-fittings (male threaded Y-tee fittings) split one air supply into two lines in pneumatic systems. Their push-in connections make installation easy. They fit tubing diameters of Φ4, Φ6, Φ8 and Φ10mm, with thread sizes of M5×0.8, M6×1.0, 1/8, 1/4, 3/8 and 1/2. The threaded section is nickel-plated brass and the body is plastic. Release rings are available in gray, blue or black, and plastic bodies in gray or black. Suitable for compressed air lines; refer to the relevant specifications for operating temperature and pressure.

KQ2Z Series Double-Ended External Hex Fittings
The KQ2Z series comprises double-ended external hex pneumatic push-in fittings for directly connecting two air tubes. Both ends are externally threaded, and the central hex body can be tightened with a wrench. The same catalog page also lists related variants: KQ2ZS double-ended internal hex fittings (with internal hex sockets at both ends) and KQ2ZF double-ended male-female fittings. Compatible tube outside diameters include 4, 6, and 10 mm, and connection thread sizes include M5×0.8, M6×1.0, 1/8", 1/4", and 3/8". The body is typically made of nickel-plated brass and is suitable for compressed air lines. Select the model according to the tube outside diameter and connection thread size, and take care to seal the threads and apply the proper tightening torque during installation.

KQ2ZD Series Dual-Head, Two-Connection Fittings
KQ2ZD series dual-head, two-connection fittings provide push-to-connect connections for pneumatic tubing. Their two-connection design allows two air lines to be connected or supplied from a single port. The catalog lists models for tubing with outer diameters of 4, 6, 12, and 16 mm, among others, with male threads such as 1/8, 1/4, 3/8, and 1/2 for connection to equipment ports. Installation dimensions include hex widths across flats of approximately 7.5~14.5 mm and body dimensions of approximately 14~21 mm, making it easier to select fittings for compact pneumatic circuits in automated equipment, pneumatic fixtures, and packaging machinery. Select the model that matches the tubing outer diameter and connection thread size.

KQ2ZF Double-Ended Male-to-Female Threaded Fitting
The KQ2ZF double-ended male-to-female threaded fitting is part of the KQ2 series of push-to-connect pneumatic fittings. It provides a threaded transition in pneumatic circuits: one end has a male thread that screws directly into a female-threaded component, such as a cylinder, valve or manifold; the other has a female thread for connection to a male-threaded component. The fitting body is generally made of nickel-plated brass. Its collet-style push-to-connect mechanism allows nylon and PU tubing to be inserted and locked in place or quickly removed without tools. The threaded section is usually precoated with sealant, eliminating the need for thread seal tape. Available tubing outside diameters are 4, 6, 8, 10, 12 and 16 mm. Connection threads include M5×0.8, M6×1.0 and tapered pipe threads such as 1/8(01S), 1/4(02S), 3/8(03S) and 1/2(04S). The hexagon width across flats varies with the thread size for convenient tightening with a wrench. The same series also includes the double-ended external hexagon KQ2Z, double-ended internal hexagon KQ2ZS, single-end 2-group KQ2VD, single-end 3-group KQ2VT and single-sided KQ2C variants, which can be combined into a complete pneumatic piping solution.

KQ2ZS Double-Ended Hex Socket Fitting
The KQ2ZS series double-ended hex socket fitting is a pneumatic push-in tube fitting with a hex socket structure at both ends. Tubing can be inserted directly for quick connection, allowing installation and removal without tools. It accommodates tube outer diameters of 4mm, 6mm, and 10mm, with connection threads including M5×0.8 and M6×1.0 metric threads and 1/8″, 1/4″, and 3/8″ imperial pipe threads. The hex socket at the top of the fitting measures approximately 4~11mm across flats and can be tightened with a hex key. The fitting is widely used for pneumatic connections in automation equipment, pneumatic control circuits, and robot end effectors. It offers reliable sealing, good pressure resistance, and repeated connection and disconnection. Select the appropriate model according to the tube outer diameter and the thread specification of the mating port.

KQ2ZT Series Double-Ended Three-Way Fittings
The KQ2ZT series consists of TWSNS (Shannaisi) double-ended three-way push-in fittings for pneumatic lines. These fittings have three ports for splitting one air supply into two or more lines in pneumatic systems for automated equipment. Their push-in design makes installation easy, and they can be used with tubing of various outside diameters and threaded connections. Refer to the relevant catalog pages for dimensions, connection threads and outside diameter specifications. The KQ2ZT series belongs to the same product family as the KQ2ZD double-ended two-way fittings and shares a similar connection sizing system.

PL45-G Series 45° Male Threaded Fittings
The PL45-G series consists of 45° male threaded pneumatic tube fittings with G threads, designed for installations where tubing must be routed at a 45° angle. They accommodate tube outside diameters of ΦD 4, 6, 8, 10, and 12 mm, with male thread sizes including G1/8, G1/4, G3/8, and G1/2. The catalog specifies overall lengths L1, L2, L3, and L4 and diameters ΦD1 and ΦD2 to help check clearances and select fittings for installation. Model numbers consist of PL45, a tube diameter code, and a G thread size code, such as PL45-04-G01, PL45-06-G04, and PL45-12-G04. These fittings connect pneumatic tubing of the corresponding outside diameter in automated equipment circuits. The material is not specified in the catalog.

PLJ45 Series Push-In 45-Degree Elbow
The PLJ45 series push-in 45-degree elbow (quick-connect pneumatic fitting) connects nylon or polyurethane tubing to pneumatic circuits at a 45° angle. It is commonly used in air supply lines for automation equipment, jigs and fixtures, and pneumatic actuators. The push-in fitting uses an internal retaining clip to secure the inserted tube and an O-ring to provide a self-sealing connection, allowing quick, tool-free installation, removal and reuse. Metric sizes 04/06/08/10/12 correspond to tube outside diameters ΦD 4, 6, 8, 10, 12 mm. Reducing combinations such as 06-04, 08-04, 10-08 and 12-10 are also available for connecting tubes of different diameters. Key dimensions include ΦD tube diameter, ΦD1 outside/hex dimension, ΦD2 connection diameter, and lengths L1~L4 (L1 approximately 12.5~19 mm and L4 approximately 52~80 mm). Select the fitting according to the tube outside diameter and available installation space.

PXJ45 Series Push-In 45° Elbow
The PXJ45 series push-in 45° elbow is a pneumatic push-to-connect fitting for connecting air tubing to actuators or pneumatic systems at a 45° angle. It is suitable for installations with limited routing space that require angled tubing. The push-in connection locks the tube in place when inserted, allowing easy installation and removal without tools. The catalog lists five basic sizes by compatible tube outside diameter: PXJ45 04, 06, 08, 10 and 12. Reducing variants include 06-04, 08-04, 10-08 and 12-10. The table provides diameter dimensions including ΦD (tube outside diameter), ΦD1 and ΦD2, as well as segment lengths L1, L2, L3 and L4, all in mm. These can be used to check the fitting's overall dimensions and installation clearance from adjacent components. Material, working pressure and temperature range are not specified in the source and should be confirmed separately based on air supply conditions and media compatibility.