Pneumatic Fittings — Page 7

TO-PMF Series Female Straight Bulkhead Fittings

TO-PMF Series Female Straight Bulkhead Fittings

The TO-PMF series consists of female straight bulkhead fittings for secure pneumatic connections through enclosure panels, partitions, or cylinder mounts. The push-in end accepts tubing with outside diameters of φ4, φ6, φ8, φ10, and φ12 mm. Female thread sizes include M5, G1/8 (code 01), G1/4 (code 02), G3/8 (code 03), and G1/2 (code 04). Bulkhead mounting threads are M10×1, M14×1, M16×1, and M20×1, with a hex locknut and sealing washer securing the fitting on opposite sides of the panel. The catalog specifies dimensions including L1 (overall length), L2 (threaded section length), L3 (bulkhead section length), H, S (hex width across flats), T (female thread size), and M (mounting thread) for product selection and panel hole design. These compact, reliably sealed fittings are suitable for routing pneumatic lines through panels in automated equipment.

TO-P Series Push-in Pneumatic Tube Fittings

TO-P Series Push-in Pneumatic Tube Fittings

The TO-P series consists of push-in pneumatic tube fittings in a range of configurations, including straight unions (TO-PU), straight bulkhead unions (TO-PM), elbows (TO-PV), tees (TO-PE), Y-unions (TO-PY), crosses (TO-PZA), straight reducing unions (TO-PG), and reducing tees (TO-PEG). They provide quick connection, branching, and transitions in pneumatic lines using φ4~φ16 tubing. The series covers tube outer diameters of 4/6/8/10/12/14/16. For straight unions and tees, overall length L1 increases from 30mm to 74mm and body outer diameter D1 from φ8 to φ23 as tube size increases. Bulkhead models also specify L2 and M10×1~M24×1 mounting threads for panel mounting. Reducing models are designated by “large-end tube diameter-small-end tube diameter” (e.g., TO-PG8-6) and connect lines with different tube sizes. To install, insert the tube fully; the gripping claws lock automatically. Press the release ring to disconnect. These fittings are widely used in automation equipment, fixtures, and pneumatic control circuits.

TO-PM Series Straight Bulkhead Fittings

TO-PM Series Straight Bulkhead Fittings

TO-PM series straight bulkhead fittings are pneumatic push-to-connect fittings that secure and connect air tubing through panels, partitions or equipment walls. Their bulkhead design features a male-threaded end for mounting through the panel and a push-to-connect port for quick tubing insertion and removal. Compatible tubing outside diameters are φ4, φ6, φ8, φ10, φ12, φ14 and φ16 mm, with corresponding thread sizes from M10×1 to M24×1. Overall length L1 ranges from 30~56 mm, L2 from 17.5~38 mm, and outside diameter D1 from φ8~φ23 mm. Select the fitting to match the tubing outside diameter and mounting thread. Applications include automated equipment, pneumatic control cabinets and tubing connections through panels.

TO-PV Series Elbow Fittings

TO-PV Series Elbow Fittings

The TO-PV series consists of push-in elbow fittings for 90° turns in pneumatic lines. They belong to the TO-P series of push-in tube fittings, along with TO-PU straight fittings, TO-PM straight bulkhead fittings, TO-PE tee fittings, TO-PY Y fittings, TO-PZA cross fittings, and TO-PG straight reducing fittings. The series is available in seven sizes for tube outer diameters of φ4, φ6, φ8, φ10, φ12, φ14, and φ16. Model numbers consist of TO-PV followed by the tube outer diameter (for example, TO-PV4 fits φ4 tubing). Two key dimensions to consider when selecting a fitting are L1, the length from the center to the end of the fitting (17.5~37 mm), and D1, the maximum outer diameter of the fitting body (φ8~φ23). Simply insert the tubing to seal and lock it in place. The fittings can be connected and disconnected by hand, making them suitable for applications requiring frequent reconfiguration. Their elbow design allows tubing to turn along edges in tight spaces, reducing the required clearance height. Used with nylon or polyurethane tubing, they are widely applied in compressed-air circuits for automated equipment, fixtures, packaging machinery, and electronics assembly lines.

TO-PE Series T-Shaped Tee Fittings

TO-PE Series T-Shaped Tee Fittings

The TO-PE series consists of T-shaped push-in pneumatic tee fittings with an engineering plastic body and metal retaining clips. They split one air supply into two lines and allow pneumatic tubing to be quickly connected and disconnected without tools. Seven tube outside diameters are supported: φ4, φ6, φ8, φ10, φ12, φ14 and φ16 mm, corresponding to models TO-PE4 through TO-PE16. Key dimensions include L1 (overall length), L2 (distance from the branch center to the end face), and D1 (outside diameter). As tube diameter increases, L1 ranges from 35 mm to 74 mm, L2 from 17.5 mm to 37 mm, and D1 from φ8 to φ23. The fittings are suitable for branching and merging compressed air lines, use air as the working medium, and can be used with PU, nylon and other pneumatic tubing. Other configurations in the series include straight (TO-PU), straight bulkhead (TO-PM), elbow (TO-PV), Y-shaped tee (TO-PY), cross (TO-PZA), and reducing fittings for metal tubing (TO-PEG).

TO-PY Series Y-Type Tee Fittings

TO-PY Series Y-Type Tee Fittings

The TO-PY series consists of Y-type push-in tee fittings for splitting or combining flow through three φ4~φ12 pneumatic tubes in automated pneumatic systems. Models are designated by tube outside diameter: TO-PY4, TO-PY6, TO-PY8, TO-PY10, and TO-PY12. Overall dimensions range from 33~56 mm for L1 and 8.6~20 mm for L2, with fitting end outside diameter D1 ranging from φ8~φ16. These fittings are suitable for pneumatic circuits requiring compact tubing layouts and can be used with matching nylon or PU tubing. Material, operating pressure, and media temperature are not specified on this page; consult the actual product or complete catalog specifications when selecting a model.

TO-PZA Series Four-Way Cross Fittings

TO-PZA Series Four-Way Cross Fittings

TO-PZA series four-way cross fittings connect four pneumatic tubes in a cross configuration to split or combine airflow. They fit tubes with outside diameters of φ4, φ6, φ8, φ10, and φ12 mm and feature push-in connections for easy installation. The body is typically made of nickel-plated brass or engineering plastic, providing pressure and corrosion resistance. Model numbers combine TO-PZA with the tube outside diameter; for example, TO-PZA4 fits φ4 tubing. Dimensions are L1: 30~63 mm, L2: 8~18 mm, and D1: φ8~φ18. These fittings are widely used in automated equipment, pneumatic control systems, and other applications.

TO-PUG/TO-PEG Series Pneumatic Push-in Fittings

TO-PUG/TO-PEG Series Pneumatic Push-in Fittings

The TO-PUG/TO-PEG series consists of reducing pneumatic push-in fittings for quickly connecting or branching tubes with two different outside diameters. TO-PUG is a two-way straight fitting, with model numbers comprising the main and branch tube diameters (for example, TO-PUG6-4 connects φ6 and φ4 tubes). TO-PEG is a three-way branch fitting, with the main tube diameter repeated after the main and branch diameters in the model number (for example, TO-PEG6-4-6). The catalog lists dimensions for each size, including L1 overall length, L2 related length, D1 body outside diameter and d1 bore diameter. Main tube diameters range from φ4~φ16 and branch tube diameters from φ4~φ14; L1 is approximately 34~70 mm, D1 is φ12~φ23 and d1 is φ8~φ21. The fittings are suitable for compressed air lines and tubing connections to pneumatic actuators and sensing components. They are easy to connect and disconnect and provide a reliable seal. Some larger sizes are listed by model number only; their dimensions must be confirmed separately.

TO-PEG Series Push-to-Connect Pneumatic Fittings

TO-PEG Series Push-to-Connect Pneumatic Fittings

The TO-PEG series consists of push-to-connect fittings for quickly connecting and adapting pneumatic tubes of different diameters. The catalog specifies D2 and d2 tube outside diameter combinations, with common sizes including φ4, φ6, φ8, φ10, φ12, φ14, and φ16. It also lists overall and mating dimensions such as L1, L2, D1, and d1. Some large/small diameter combinations list only the model number, with dimensions marked “-” and requiring further confirmation. Simply insert the tubes to install, making pneumatic systems easy to assemble and maintain.

TO-PC-G Series Straight Male Thread Push-in Fittings

TO-PC-G Series Straight Male Thread Push-in Fittings

TO-PC-G series straight male thread push-in fittings connect pneumatic tubing directly to female threaded ports. They accommodate φ4 and φ6 tubing and are available with G1/8, G1/4, G3/8, G1/2 and G3/4 male threads. Models are distinguished by tubing outside diameter and thread size, such as TO-PC4-01G and TO-PC6-03G. The table lists overall and installation dimensions, including L1, H, S1, S2 and D1, to simplify selection and piping layout. The push-in design makes installation easy for automated equipment, pneumatic control cabinets and general industrial air lines.

TO-POC-G Series Cylindrical Hex Socket Fittings

TO-POC-G Series Cylindrical Hex Socket Fittings

The TO-POC-G series cylindrical hex socket fitting is a push-in male threaded fitting for pneumatic lines. Its cylindrical body has a recessed hex socket at the end, allowing direct installation with a hex key, particularly in confined spaces where an external wrench cannot reach. The other end features a push-in connection that automatically locks and seals when the tube is inserted; press the release ring to disconnect. The fittings accommodate tubing with an outside diameter of φ4 mm or φ6 mm and have G1/8, G1/4, G3/8, G1/2 or G3/4 parallel pipe threads (BSPP), sealed by an end-face seal. The catalog provides overall and installation dimensions including L1, H, S1, S2 and D1 to facilitate piping layout and wrench selection. These fittings are primarily used to connect compressed air lines to cylinders, solenoid valves and air preparation components.

TO-PL-G Right-Angle Threaded Fitting

TO-PL-G Right-Angle Threaded Fitting

TO-PL-G series right-angle threaded fittings (male elbows) connect pneumatic tubing to female threaded ports at a 90° angle. They accommodate tubing with outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm and are available with G1/8, G1/4, G3/8 and G1/2 threads. The body is nickel-plated brass and the seal is nitrile rubber. Features include push-in connections, easy installation and reliable sealing. The typical operating pressure range is 0~1.0 MPa, with a temperature range of -20~+80°C. Model numbers consist of TO-PL + tube diameter + thread size code + G. The table provides dimensions including L1, L2, H, S and D1.

TO-PB-G Series Male Branch Tee Fitting

TO-PB-G Series Male Branch Tee Fitting

The TO-PB-G series male branch tee fitting creates a branch from the middle of a main pneumatic line, providing a three-way connection with one inlet and two outlets or two inlets and one outlet. It fits tubing with outer diameters of φ4, φ6, φ8, φ10, φ12, φ14, and φ16 mm, and is available with G1/8, G1/4, G3/8, G1/2, and G3/4 threads. Body dimensions are marked L1, L2, H, S, etc., to help with selection based on available installation space. The model code consists of the base model TO-PB, the tube outer diameter, and the thread size code (01G~06G). For example, TO-PB4-01G denotes a fitting for φ4 tubing with a G1/8 thread. This push-in pneumatic fitting is suitable for compressed air lines, offering easy installation and reliable sealing.

TO-PD-G Series Male Branch Tee Fittings

TO-PD-G Series Male Branch Tee Fittings

The TO-PD-G series consists of male branch tee push-in fittings for connecting a threaded side branch in pneumatic circuits. The fittings accept tubing with an outside diameter of φ4~φ16mm and feature G-series male threads in sizes including G1/8, G1/4, G3/8, G1/2 and G3/4. The catalog provides dimensions such as L1, L2, H, S and D1 for each combination of tube outside diameter (φ4/φ6/φ8/φ10/φ12/φ14/φ16) and thread size, making selection straightforward. These fittings are widely used for air distribution in automated equipment and for supplying cylinders and valve manifolds.

TO-PH-G Series Panel-Mount Swivel Elbow Fittings

TO-PH-G Series Panel-Mount Swivel Elbow Fittings

The TO-PH-G series panel-mount swivel elbow fittings are pneumatic push-to-connect threaded fittings for right-angle connections between tubing and female-threaded ports. They allow tubing to be routed around corners in confined spaces. They accommodate tubing outside diameters of φ4~φ16 mm and thread sizes G1/8, G1/4, G3/8 and G1/2, with hex widths across flats S of 14~24 mm. The catalog provides overall and installation dimensions including L1, L2, L3, H, T and S to help select the appropriate tube diameter and thread combination. The swivel design allows the fitting direction to be adjusted during installation. Typical applications include automation equipment, pneumatic control circuits and machinery piping.

TO-PX-G Series Y-Type Three-Way Threaded Fittings

TO-PX-G Series Y-Type Three-Way Threaded Fittings

TO-PX-G series Y-type three-way threaded fittings provide a branch connection with one air inlet and two outlets in pneumatic lines. One end has a male thread (G1/8, G1/4, G3/8, G1/2), while the other two ends have push-in connections for tubing with outside diameters of Φ4, Φ6, Φ8, Φ10, and Φ12 mm. Body dimensions include L1, L2, H, and width across flats S: L1 ranges from 34~60 mm, L2 from 8.6~20 mm, H from 5~9 mm, and S from 12~24 mm. The model number consists of TO-PX, the tube outside diameter code (4/6/8/10/12), and the thread size code (01/02/03/04, corresponding to G1/8, G1/4, G3/8, and G1/2 respectively). The final G indicates the threaded type. Suitable for automated equipment, pneumatic control circuits, and similar applications.

TO-SQ Series Pneumatic Straight Push-in Fittings

TO-SQ Series Pneumatic Straight Push-in Fittings

The TO-SQ series consists of straight push-in fittings for pneumatic lines, suitable for nylon or polyurethane tubing with an outer diameter of φ4~φ16. Thread options include M5, R1/8, R1/4, R3/8, and R1/2. The push-in design seals and locks the tube upon insertion; press the release ring to disconnect it, making pneumatic systems quick to assemble and maintain. The catalog provides installation dimensions including L1, L2, L3, H, S, and body outer diameter D1. Fittings can be selected by tube outer diameter and thread size and are widely used in automation equipment, fixtures, pneumatic actuators, and air distribution systems.

KN-PL All-Brass Male Elbow Fitting

KN-PL All-Brass Male Elbow Fitting

The KN-PL all-brass male elbow is a pneumatic push-in fitting with a male threaded connection. Made entirely of brass, it is suitable for pneumatic tubing with an outside diameter of 4mm or 6mm. It is available in a range of thread sizes, including M5, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4 and G1/2, to suit different installation needs. Its right-angle design makes tubing easier to route in confined spaces, and it is widely used in automation equipment and pneumatic control systems. Key dimensions include L, L1, S1, S2 and H; values vary by model.

BXGKN-PL Stainless Steel Female Threaded Elbow Fitting

BXGKN-PL Stainless Steel Female Threaded Elbow Fitting

The BXGKN-PL series consists of stainless steel female threaded pneumatic tube fittings (90° elbows). Their stainless steel bodies offer better corrosion resistance than all-brass versions, making them suitable for air, water, and other fluid lines. They accommodate tube outer diameters of 4 mm and 6 mm, with thread sizes including M5, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, and G1/2. Model numbers combine tube diameter and thread codes, such as KN-PL4-M5 and KN-PL6-02; stainless steel versions have the BXG prefix, as in BXGKN-PL4-M5. See the specification table for body hex sizes S1/S2 and dimensions L, L1, and H. These fittings enable right-angle connections in confined spaces and are widely used in automation equipment, pneumatic control cabinets, and corrosion-sensitive semiconductor and food applications.

KN-PB T-Type All-Steel Three-Way Threaded Fitting

KN-PB T-Type All-Steel Three-Way Threaded Fitting

The KN-PB series comprises T-type all-steel three-way threaded fittings for splitting a pneumatic air supply into two lines or connecting a branch line in a T configuration. One end has a push-in tube connection for tubing with an outside diameter of 4 mm or 6 mm; the other has a male thread in sizes M5, R1/8, R1/4, R3/8, R1/2 or R3/4, for direct connection to threaded ports on common pneumatic components, solenoid valves and cylinders. Key dimensions include overall length L (starting at 36 mm), threaded end length L1, across-flats widths S1 and S2, and height H. Some models specify tube outside diameter D and inside diameter d, such as 4×Φ2.5, 10×Φ6.5 and 16×Φ12. The all-steel version is designated KN-PB; the stainless steel version with the same configuration is designated BXGKN-PB. The series is suitable for piping and air distribution in automated equipment, jigs and fixtures, and general industrial pneumatic systems.

KN-PD Series All-Steel T-Type Side-Threaded Tee Fittings

KN-PD Series All-Steel T-Type Side-Threaded Tee Fittings

The KN-PD series consists of all-steel T-type side-threaded tee fittings for pneumatic lines requiring a three-way connection with a threaded port on the side. They fit tubing with outside diameters of 4, 6, 8, 10, 12, 14, and 16 mm, with thread sizes M5, R1/8, R1/4, R3/8, R1/2, and R3/4. Listed dimensions are approximately L 35~66.5 mm, L1 18~33.5 mm, S1 8~21 mm, S2 10~27 mm, and H 5~13 mm. The fittings are available in all-steel construction, with a BXGKN-PD stainless steel version for applications requiring corrosion resistance. Select the model according to the tube diameter and thread size.

KN Series All-Brass Pneumatic Fittings

KN Series All-Brass Pneumatic Fittings

The KN series consists of all-brass pneumatic push-in fittings. This page covers three subseries: KN-PH right-angle banjo fittings, KN-PZR threaded four-way cross fittings, and KN-SL one-way flow control valves. Equivalent BXGKN stainless steel (SUS304) products are also available. Suitable tube outer diameters are Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, and Φ16mm, with thread sizes M5, R1/8, R1/4, R3/8, R1/2, and R3/4. They are used to change direction at right angles, split compressed air flow, and control cylinder speed. Dimensions are specified as L/L1/L2 lengths, S1/S2 widths across flats, H height, and T thread size, with D×d(Φ) mounting hole diameter also provided. Select the model according to the combination of tube outer diameter and thread size.

KN-PZR All-Brass Threaded Cross Fitting

KN-PZR All-Brass Threaded Cross Fitting

The KN-PZR series all-brass threaded cross fittings split or combine flow in four directions in pneumatic lines. The body is made of brass; a stainless steel BXGKN-PZR version is also available. Compatible tube outer diameters are Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16 mm, with M5, R1/8, R1/4, R3/8, R1/2 and R3/4 threaded connections. The catalog provides overall and thread dimensions including L, L1, S1, S2, H and T to assist with fitting selection and installation. Model numbers consist of KN-PZR + tube outer diameter + thread code, for example KN-PZR4-M5 and KN-PZR16-06.

KN-PE Series All-Steel Tee Fittings

KN-PE Series All-Steel Tee Fittings

KN-PE series all-steel tee fittings are push-in fittings for pneumatic systems, designed to split or combine compressed air and other gas flows in a T-shaped configuration. They are available in seven tube outer diameter sizes: φ4, φ6, φ8, φ10, φ12, φ14 and φ16, corresponding to models KN-PE4~KN-PE16. Overall dimensions range from 36~67 mm for L, 18~33.5 mm for L1 and 8~21 mm for S1; D×d dimensions are also specified (e.g., 4×φ2.5). The all-steel construction is suitable for applications requiring strength, wear resistance and corrosion resistance. BXGKN-PE stainless steel tee fittings are also available in the same series. To install, simply insert the air tube into the fitting. The number in the model indicates the compatible tube outer diameter.

KN-PZA Series All-Steel Four-Way Cross Fittings

KN-PZA Series All-Steel Four-Way Cross Fittings

The KN-PZA series comprises all-steel four-way cross fittings for connecting four pneumatic tubes at a single junction to split or combine airflow. A stainless steel version with the same configuration, BXGKN-PZA, is also available for damp or corrosive environments or applications with higher cleanliness requirements. Seven sizes are available for tube outside diameters of φ4, φ6, φ8, φ10, φ12, φ14 and φ16. The model number is formed by adding the tube outside diameter directly after the series designation KN-PZA (for example, KN-PZA8 fits φ8 tubing). The metal body offers better pressure, impact and temperature resistance than ordinary plastic push-in fittings, making it suitable for pneumatic connections in machinery manufacturing, automated production lines, welding and spray equipment. Select the fitting primarily by tube outside diameter. During installation, insert the tubing fully and ensure that the forces on all four ports are evenly distributed.

KN-PE / BXGKN-PE Series Tee Fittings

KN-PE / BXGKN-PE Series Tee Fittings

The KN-PE / BXGKN-PE series consists of equal-diameter push-to-connect tee fittings for pneumatic tubing, available in all-steel KN-PE and stainless steel BXGKN-PE versions. They accommodate tubing with outside diameters of φ4~φ16 mm and are used to branch or combine flow in pneumatic circuits. The catalog lists L, L1, S1, and D×d dimensions for each size: L is approximately 36~67 mm, L1 approximately 18~33.5 mm, and S1 approximately 8~21 mm. The all-steel version is suitable for general industrial pneumatic systems, while the stainless steel version is suited to corrosive, clean, or more demanding environments. Select the model according to the tubing outside diameter; for example, φ4 corresponds to KN-PE4. Stainless steel models are designated by the BXGKN-PE prefix followed by the tubing diameter.

KN-PEG Series All-Brass Reducing Tee Fittings

KN-PEG Series All-Brass Reducing Tee Fittings

KN-PEG series all-brass reducing tee push-in fittings split one air supply into two lines with different tube outside diameters. Simply insert the tubes to lock them in place; no tools are required. The main line accepts tube outside diameters of 6, 8, 10, 12, 14 and 16 mm, while the branch accepts 4, 6, 8, 10, 12 and 14 mm, with 11 sizes available. Overall dimensions are L 38~67 mm, L1 18~32 mm, S1 10~21 mm and S 8~19 mm. The brass body has an electroless nickel-plated surface that prevents the release of copper ions. The fittings are suitable for general industrial pneumatic, water and non-corrosive fluid lines. A stainless steel version of the same design is also available with the model prefix BXGKN-PEG.

BXGKN-PEG Stainless Steel Reducing Tee Fitting

BXGKN-PEG Stainless Steel Reducing Tee Fitting

The BXGKN-PEG series consists of push-in pneumatic reducing tee fittings with stainless steel bodies, designed for T-shaped branching and connecting tubes of two different diameters. The equivalent all-metal model with the same design is KN-PEG, made of nickel-plated brass. The model designation is BXGKN-PEG + main tube size + "-" + reduced branch tube size. For example, BXGKN-PEG8-6 denotes a main tube size of 8×Φ5 and a reduced branch size of 6×4. Sizes range from 6×Φ4 to 16×Φ12 for the main tube and from 4×2.5 to 14×10 for the reduced branch, with corresponding dimensions of L 38~67mm, L1 18~32mm, S1 10~21mm and S 8~19mm. The corrosion-resistant stainless steel construction is suitable for piping carrying media such as air and water, and is commonly used in food, medical, chemical and other applications requiring corrosion resistance. Simply insert the tube into the fitting to lock and seal it, making installation and removal easy.

KN-PC-C Straight Miniature Push-in Fitting

KN-PC-C Straight Miniature Push-in Fitting

The KN-PC-C straight miniature push-in fitting is part of the miniature pneumatic quick-connect series, designed for quick connection and disconnection of small-diameter pneumatic tubing and threaded ports in pneumatic circuits. Its brass body has an electroless nickel-plated surface, preventing the release of copper ions and making it suitable for pneumatic control applications with cleanliness requirements. It accepts tubing with outer diameters of Φ3.18, Φ4 and Φ6 mm (corresponding inner diameters of Φ2.18, Φ2.5 and Φ4 mm) and operates at pressures from 0~1.0 MPa. Thread sizes include M3×0.5, M5×0.8 and R1/8, with options selectable according to tubing size and mounting thread. The same series also includes the KN-PL-C miniature elbow quick-connect fitting. The same catalog page lists KN-PEG all-brass reducing tees, BXGKN-PEG stainless steel reducing tees, and male-threaded fittings such as KN-PC-G and KN-PL-G, which can be combined to create a complete pneumatic piping connection solution.

KN-PL-C Series Miniature Push-to-Connect Elbow Fittings

KN-PL-C Series Miniature Push-to-Connect Elbow Fittings

The KN-PL-C series consists of miniature push-to-connect elbow fittings for tubing with outside diameters of Φ3.18, Φ4, and Φ6, with connection threads of M3×0.5, M5×0.8, and R1/8. The operating pressure is 0~1.0 MPa. The brass body has an electroless nickel-plated finish that minimizes copper ion release, making it suitable for pneumatic lines with cleanliness requirements. The elbow design allows airflow to change direction in compact spaces and is commonly used in automation equipment, small cylinders, and precision pneumatic circuits. Select the fitting to match the tubing outside diameter and connection thread size.

KN-PC-G All-Brass Straight Male Connector

KN-PC-G All-Brass Straight Male Connector

The KN-PC-G all-brass straight male connector is a push-in fitting for pneumatic piping. It has a brass body, a push-in port for pneumatic tubing at one end, and a male threaded connection at the other. Its straight design is suitable for inline piping in confined spaces. The tubing locks into place when inserted, making frequent disassembly and maintenance easier. The same page also lists the stainless steel BXGKN-PC-G male elbow connector as a corrosion-resistant variant. This series can be used in general pneumatic circuits for compressed air, vacuum, and similar applications. Confirm the tube diameter, thread size, and overall dimensions using the complete model number or catalog selection table.

KN-PL-G All-Brass Male Elbow Fitting

KN-PL-G All-Brass Male Elbow Fitting

The KN-PL-G series consists of all-brass male elbow push-in fittings for pneumatic piping, connecting tubing at a 90° angle to externally threaded components such as cylinders, valves and air manifolds. The brass body has a uniform electroless nickel coating that does not release copper ions, making it suitable for clean environments and applications where copper contamination must be avoided. A stainless steel (SUS) version with the same design, BXGKN-PL-G, is also available for corrosive environments or applications requiring higher cleanliness. Compatible tubing outside/inside diameter sizes include Φ3.18×Φ2.18, Φ4×Φ2.5 and Φ6×Φ4. The operating pressure range is 0~1.0MPa, and connection threads include metric and pipe thread sizes such as M3×0.5, M5×0.8 and R1/8. Simply insert the tubing to lock it in place; no tools are required, and it can be disconnected and reconnected repeatedly. When selecting a fitting, confirm the tubing outside diameter, thread size and thread type (metric M or tapered pipe thread R).

TO PC Series Compression Fittings

TO PC Series Compression Fittings

TO PC series compression fittings consist of a fitting body, ferrule, locking nut and other basic components. They feature a simple design, low pressure loss and reliable sealing, and can withstand demanding conditions such as high and low temperatures. Designed for air lines, the series has an operating pressure range of 0.1~2.5 MPa (15~150 psi), a pressure resistance of 2.5 MPa (225 psi), and an operating temperature range of -40~120℃. The fittings can be connected to steel, stainless steel or hard nylon tubing, with tube outer diameters of Φ4, Φ6, Φ8, Φ10 and Φ12. Thread sizes are indicated by codes such as 01. The ordering model consists of the series code, tube outer diameter, thread size and an optional suffix, for example TO PC 8-01-*.

TO-PC Series Straight Male Thread Fittings

TO-PC Series Straight Male Thread Fittings

TO-PC series straight male thread fittings connect metal tubes in a straight line to female threaded ports in pneumatic piping, enabling air supply distribution and actuator connections. They accommodate φ4, φ6, φ8, φ10, φ12, φ14, and φ16 metal tubes, with male thread sizes R1/8, R1/4, R3/8, R1/2, and R3/4. Model numbers use TO-PC as the series code, followed by tube diameter and thread size codes, as in TO-PC4-01 and TO-PC16-06. The table provides installation dimensions including L1 overall length, S1/S2 hex widths across flats, and H height, making it easier to plan piping layouts and check wrench clearance. Suitable for automation equipment, pneumatic control systems, and general industrial piping.

TO-PL Series Right-Angle Threaded Fittings

TO-PL Series Right-Angle Threaded Fittings

TO-PL series right-angle threaded fittings (elbows) connect metal or plastic tubing in pneumatic lines, providing a 90° change of direction. The series includes male-threaded elbows (R threads) and female-threaded elbows (G threads) for tube diameters Φ4, Φ6, Φ8, Φ10, and Φ16, with thread sizes ranging from R1/8~R3/4 and G1/8~G1/2. The nickel-plated brass body offers corrosion resistance, reliable sealing, and easy installation. Key dimensions include L1, L2, S1, S2, and H, with values varying by model. These fittings are widely used in automated equipment, pneumatic control systems, and machinery manufacturing.

TO-PB Series T-Type Threaded Tee Fittings

TO-PB Series T-Type Threaded Tee Fittings

TO-PB series T-type threaded tee fittings are used to create three-way branch connections in metal tubing systems, splitting one line into two. The catalog lists compatible metal tube outside diameters of Φ4, Φ6, Φ8, Φ10, Φ12, and Φ16 mm, with threaded connections including R1/8, R1/4, R3/8, and R1/2. It also provides overall and installation dimensions such as L1, L2, S1, S2, T, and H. Different tube diameter and thread size combinations correspond to different models, such as TO-PB4-01, TO-PB6-02, and TO-PB10-04, making it easy to select a fitting based on tube size and port thread. The series is suitable for tee branch arrangements in factory automation pneumatic or fluid lines. Confirm the specific material, operating pressure, and media compatibility using the manufacturer's documentation.

TO-PD Series Side-Threaded Tee Fitting

TO-PD Series Side-Threaded Tee Fitting

The TO-PD series side-threaded tee fitting is a three-way connector for pneumatic or fluid lines, suitable for side branch connections with metal tubes (Φ4~Φ16). One end has a threaded connection (R1/8~R3/4), while the other two connect to metal tubes to split or combine flow. The model number specifies the tube diameter and thread size; for example, TO-PD4-01 indicates a Φ4 tube diameter and an R1/8 thread. Body dimensions include L1, L2, S1, S2 and H. The fitting is suitable for automated equipment, pneumatic systems and similar applications.

TO-PH Series Right-Angle Milled Fittings

TO-PH Series Right-Angle Milled Fittings

TO-PH series right-angle milled fittings provide a 90° connection between metal tubing (Φ4~Φ16) and threaded ports in factory automation pneumatic systems. They are available for metal tube outside diameters of 4, 6, 8, 10, 12, 14 and 16, with threaded ends in M5, R1/8, R1/4, R3/8 and R1/2 to accommodate different flow and installation space requirements. The catalog provides overall and connection dimensions including L1, L2, S1, S2, T, H and D1 to facilitate product selection and piping layout.

TO-PEG Series Reducing Tee Fittings

TO-PEG Series Reducing Tee Fittings

The TO-PEG series consists of push-in reducing tee fittings for pneumatic piping and belongs to the Sankes TO series of push-in fittings for metal tubing. These fittings create a branch from a main line, with different connection sizes available for the main line ends and the branch, allowing tubes of different diameters from φ4~φ16 to be connected. Models are designated by TO-PEG followed by the larger tube diameter and smaller tube diameter (e.g., TO-PEG8-6). The same family also includes TO-PU straight fittings, TO-PM straight bulkhead fittings, TO-PV elbow fittings, TO-PE equal tee fittings, TO-PG straight reducers, and TO-PZA cross fittings. The push-in design seals upon insertion; press the release ring to remove the tube. The fittings are suitable for compressed air lines and air distribution and piping in automated equipment. Common body and gripping-claw dimensions include metal tube outer diameter (φ4, φ6, φ8, φ10, φ12, φ14, φ16), L1 overall length, S1/S2 insertion depths at both ends, and D1/D2 connection diameters. Select the appropriate larger-end–smaller-end model according to the actual tube outer diameters at the main line ends and branch.

TO-PB Series Male Branch Tee Fittings

TO-PB Series Male Branch Tee Fittings

The TO-PB series consists of male branch tee fittings for pneumatic lines. The fitting body has a male threaded port for connecting a branch in an air line to a threaded pneumatic component or pipe, without additional welding or compression fittings. The push-in ends accommodate nylon and PU tubing with an outer diameter of Φ4~Φ12 mm. Tubing locks into place when inserted and can be removed by pressing the release ring, making repeated assembly and disassembly easy. The threaded end is available in five sizes: M5, R1/8, R1/4, R3/8 and R1/2. Codes 01/02/03/04 correspond to R1/8, R1/4, R3/8 and R1/2, respectively. The catalog lists installation dimensions by tube outer diameter and thread size, including L1 (overall length), L2 (threaded end length), H (height at the thread base), D (air passage diameter) and S (width across flats), to help with selection and piping layout. The series also includes straight, elbow and four-way variants; this table covers the male branch tee type. These fittings are widely used for air distribution and actuator supply in automation equipment, pneumatic fixtures and packaging machinery.

TO-PL Right-Angle Threaded Fitting

TO-PL Right-Angle Threaded Fitting

The TO-PL series consists of right-angle threaded fittings (push-to-connect pneumatic fittings) for connecting air tubing to threaded ports at 90°. They accommodate tubing with an outside diameter of Φ4~Φ16mm and are available with thread sizes including M5, R1/8, R1/4, R3/8 and R1/2. Model numbers consist of the series code TO-PL, the tube outside diameter and the thread size code, as in TO-PL4-M5, TO-PL6-01, TO-PL8-02, TO-PL10-03 and TO-PL12-04. The main dimensions are designated by L1, L2, H, D, S and T: L1 is the overall fitting length, L2 is the threaded section length, H is the height at the thread base, D is the tube insertion bore diameter, S is the hex width across flats and T is the thread size. Designed for compressed air systems, these fittings are easy to install, provide a reliable seal and allow quick tube connection and disconnection. They are widely used in pneumatic circuits on automated equipment.

TO-PU Series Straight Union

TO-PU Series Straight Union

The TO-PU series straight union is a pneumatic push-in fitting used to connect two air tubes in line, extending an air line or connecting a branch line. Its one-touch push-in design makes installation easy, and it is suitable for automated equipment, pneumatic control circuits, and general air piping. The catalog lists seven tube outer diameters: Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, and Φ16, with corresponding models from TO-PU4 to TO-PU16. Length L1 ranges from 34~70 mm, and D ranges from 2.5~12 mm. Select the model to match the tube outer diameter.

TO-PE Series Tee Fittings

TO-PE Series Tee Fittings

The TO-PE series comprises push-in tee fittings for pneumatic lines. They split one air supply into two outputs or combine two airflows, enabling branch and parallel connections. One end has a push-in tube port that automatically locks and seals when nylon or PU tubing is inserted, without tools. The branch end has a threaded connection that screws directly into threaded ports on cylinders, solenoid valves, air manifolds and other components. The catalog page lists TO series fitting parameters including tube outer diameter, model, L1, L2, H, D, S and T. Tube outer diameters include Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16, while thread sizes include M5, R1/8, R1/4, R3/8 and R1/2, accommodating transition connections from miniature cylinders to medium- and large-diameter air lines. When selecting a fitting, confirm both the tube outer diameter (Φ4~Φ16) and thread size (M5 or R thread), and check the overall lengths L1 and L2 and the width across flats S against the available installation space.

TO-PV Series Elbow Fittings

TO-PV Series Elbow Fittings

TO-PV series elbow fittings are push-in fittings for pneumatic lines, suitable for tubing with an outer diameter of Φ4~Φ16 mm. They provide a 90° connection in confined spaces. The catalog lists 7 sizes from TO-PV4 to TO-PV16, with L1 dimensions of 17~35 mm and D dimensions of 2.5~12 mm. Model numbers follow the format “TO-PV+tube outer diameter”. Confirm the tube outer diameter and available installation space when selecting a model. These fittings are suitable for pneumatic piping in automated equipment, pneumatic fixtures, packaging machinery, and similar applications.

TO-PZA Series Four-Way Fittings

TO-PZA Series Four-Way Fittings

TO-PZA series four-way fittings (cross-type push-in fittings) connect four pneumatic tubes simultaneously to split or combine airflow. They fit tubes with outer diameters of Φ4~Φ16 mm, with corresponding L1 lengths of 34~70 mm and inner diameters D of 2.5~12 mm. The fitting bodies are typically made of nickel-plated brass or engineering plastic and feature a self-locking push-in design for easy installation and reliable sealing. They are suitable for automation equipment, pneumatic control systems, robotic arms and similar applications. The working medium is purified compressed air, with a typical operating pressure of 0~1.0 MPa and an operating temperature of -20~60℃ (actual specifications depend on the product). Models are distinguished by tube outer diameter: TO-PZA4, TO-PZA6, TO-PZA8, TO-PZA10, TO-PZA12, TO-PZA14, TO-PZA16.

BXG-PL Series Stainless Steel Push-In Fittings

BXG-PL Series Stainless Steel Push-In Fittings

BXG-PL series stainless steel push-in fittings are made entirely of SUS316L stainless steel, except for the seals, providing excellent corrosion resistance. The seals are made of fluoroelastomer (FKM), which resists chemicals, acids and high temperatures. These oil-free fittings comply with food hygiene regulations and are widely used in the food, chemical, medical and other industries. Operating pressure: 0-1.5MPa; vacuum pressure: -100kPa(10Torr); operating temperature: -20~220℃. Available for Φ4~Φ16 metric tubing, with M3×0.5~M16×2.0 metric threads and R1/8~R3/4 55° tapered pipe threads. Optional thread sealant is available.

BXG-PL Series Stainless Steel Female-Threaded Tube Fittings

BXG-PL Series Stainless Steel Female-Threaded Tube Fittings

BXG-PL series female-threaded tube fittings are made of stainless steel and have a female thread at the tube end for connecting pneumatic or fluid lines to threaded ports. Tube outside diameter options include Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, and Φ16, with thread sizes M5, M6, RC1/8, RC1/4, RC3/8, and RC1/2. Model suffixes -01/-02/-03/-04 indicate different thread sizes, -M5/-M6 indicate metric threads, and FM models are small-size metric-threaded products. The catalog provides overall and installation dimensions, including A, B, C, D, D1, E, F, G and L1, L2, H, S, T, D1, D2, to help with line layout, port matching, and product selection.

BXG-PU Straight Union

BXG-PU Straight Union

BXG-PU series straight unions are push-in fittings for pneumatic systems, used to connect two tubes of the same or different diameters. Their straight-through design is suitable for in-line tube connections. The fitting body is typically made of brass or engineering plastic and offers pressure and corrosion resistance. Seven sizes are available for tube outside diameters from 4mm to 16mm. Each model corresponds to a tube size; for example, BXG-PU4-4 fits tubing with a 4mm outside diameter. Compact and easy to install, these fittings are widely used in automation equipment and pneumatic control systems.