product — Page 10

PDJ Series Plug-In Side Tee

NMA204 Series O-Ring Mechanical Seal
Suitable for clean water, wastewater, oil, and other mildly corrosive fluids.

PTB Precision Motion Ball Screw (II)
XYA93 Series Right-Angle Handle with Cover
Right-angle type with cover. The handle is made of SUS304 with a mirror-polished finish; the cover is made of ABS and is white.
SYX-H-BN/SYX-H-BL Series Slider Guide Rails
The diagram shows the dimensions and moment directions of the slider guide assembly. The table lists slider dimensions, rail dimensions, rail mounting bolt size, rated dynamic load, rated static load, allowable static moments, and weight.

KFN280 Series Hollow Rotary Platform
Hollow rotary platform. The page displays product photos, line drawings, dimension drawings, a compatible motor table, and a platform specifications table.

SA Series Pipeline Valves

ZKFN85 Series Hollow Rotary Platform
The page is labeled “Hollow Rotary Platform.”

MBDA Series Free-Mount Cylinder (Koganei Type)
Compact square cylinder.

PUL Series Telescopic Tube

DESJG Series Aluminum Alloy Single-Diaphragm Set-Screw Type
The hubs are made of high-strength aluminum alloy. The diaphragm is made of 304 stainless steel. High torsional rigidity enables precise control of shaft rotation and high-precision operation. Designed specifically for servo and stepper motors. The backlash-free shaft connection is suitable for forward and reverse rotation. Low inertia makes it suitable for high-speed operation. Secured with set screws.
SCN/SCI Series — Precision Ground Series

OSP Series Rodless Cylinder
PM-HA Series High-Power Variable-Frequency Controller

D-M9B Series Magnetic Switch

HNFS Series High-Pressure Swing Clamp Cylinder
As the piston rod retracts, the clamp arm rotates; after clamping, the piston rod continues to retract linearly. Clockwise or counterclockwise rotation is available. The standard angle is 90°, with 30°, 45°, and 60° also available. The cylinder body is made of high-grade aluminum with a hardened surface.
XYQW105 Series Draw Latch
NMA207 Series O-Ring Mechanical Seal
Suitable for clean water, wastewater, oil, and other mildly corrosive fluids.

6M Series Shenma Standard 45# Steel Spur Gear (6M)

DPG23-24 Series Split Jaw Coupling
Description: Simple construction, compact radial dimensions, light weight, and low moment of inertia make this coupling suitable for medium- and high-speed applications. It provides substantial axial, radial, and angular compensation. The polyurethane elastic element is wear- and oil-resistant. The coupling requires no lubrication and little maintenance, and can operate continuously over long periods. Listed applications include metallurgy, mining, petroleum, chemicals, lifting, transportation, light industry and textiles, water pumps, and fans.
KN-PM Series All-Brass Straight Bulkhead Fittings
All-Brass Straight Bulkhead Fitting

CDJ2B/PB Series Stainless Steel Mini Cylinders
Stainless steel mini cylinder.

TO-PG Series Straight Reducing Fittings
The TO-PG series consists of push-in straight reducing fittings for connecting two coaxial pneumatic tubes of different outside diameters (metal, nylon or PU). The fittings have a metal tubular body with push-in gripping claws and O-ring seals at each end. Simply insert the tube to lock it in place, or press the release ring to remove it; no tools are required. The range covers ten reducing combinations, including φ6-φ4, φ8-φ4, φ8-φ6, φ10-φ6, φ10-φ8, φ12-φ8, φ12-φ10, φ14-φ10 and φ16-φ14. Key dimensions include L1 (overall length), S1 (large-end width across flats/release ring height), S2 (small-end width across flats/release ring height), D1 (large-end tube diameter) and D2 (small-end tube diameter). Related designs in the series include reducing tees (TO-PEG) and four-way cross fittings (TO-PZA), which can be combined with the straight fittings to build complex pneumatic circuits. They are suitable for compressed-air piping in automated equipment, fixtures and packaging machinery.

XYPL027 Series Handle
NMA192 Series O-Ring Mechanical Seal
Suitable for clean water, wastewater, oil, and other mildly corrosive fluids.
LEGW-SB/LEGW-CB Series Guide Rails and Blocks

FPC Series PCB-Mount Filters
PCB mounting, FPQ connector; compact unit. Suitable for modular power supplies and mini-electronic instruments (DC side).

GR Star-Shaped Flexible Coupling Spider
The GR star-shaped flexible coupling spider is made of polyurethane (TPU/CPU), with a hardness of 98° and excellent elasticity and wear resistance. Akron abrasion loss is <0.05 cm²/1.61 km. It cushions and connects drive shafts in a wide range of mechanical couplings. Models range from GR-19 to GR-110, with outer diameters of 40–255 mm, inner diameters of 18–121 mm, overall heights of 14.5–42 mm, and modules of 6–10. The bores are machined to H7/H8 tolerances. Custom dimensions are available to meet different operating requirements. It operates across a wide temperature range and supports torque values of 22.4–2,500 N·m.

MI1051 Series Instruments
3.5-inch display with graphing and capacitive touchscreen control; switchable units and automatic zeroing via a touch button; Type-C communication interface. Compatible with our sensors. The image highlights upper and lower limit alarms and peak and valley capture.

SSX20-120 Series Gear Reducers

MSUB Series High-Precision Vane-Type Rotary Actuator

MS8018-150 Series Flat Plate Pressure Sensor
Flat plate pressure sensor with IP65 protection, designed for press-fitting machines in the new energy industry.

CPLM Series Bulkhead Elbow

P-DMAL Series Multi-Angle Line Light Source P-DMAL (Direct-Irradiation Type)
Suitable for detecting surface defects in glass, inspecting mobile phone screens, and inspecting PCB substrates. Multiple high-intensity line lights from different angles converge on the same point; the image indicates an illuminance of up to 1 million LUX, with adjustable angles.

RB Series Hydraulic Shock Absorbers
Product images show the standard type and the type with a rubber pad.

S3M Series Semicircular-Tooth Synchronous Belt S3M
Additional catalog parameters (refer to the corresponding specification table): H 1.94

HXSD-DK Series Zinc Alloy Compression Fitting
Product materials: Sections C and F are made of high-quality, thickened zinc alloy; section E is made of rubber; and section D is made of galvanized iron. Product features: zinc alloy with chrome or nickel plating; compression connection for flexible conduit; waterproof, dustproof, and resistant to salt spray, alcohol, grease, and common solvents. Dimensions and thread standards can be modified upon request, in addition to the specifications listed in the table.

RQGI-M Series Hose Connectors
Material: Nylon. Protection rating: IP65.

KJE Series Bulkhead Union

MHY2 Series Air Gripper (Fulcrum Opening/Closing Type) / Cam-Type 180° Opening/Closing
LS620 Series Small Parts

JM Series Column-Type Diaphragm Coupling
The listed features include: nominal torque of 25–10000 N·m; operating temperature of 20–250℃; no lubrication required and suitable for use in corrosive media. Compared with gear couplings, it has a simple structure, is easy to manufacture and maintain, and is suitable for high-speed operation. It is easy to assemble, disassemble, and inspect; during disassembly, the driving and driven parts of the transmission system can be disengaged without axial movement. The page states that it is used in industries such as metallurgy, steel rolling, mining, chemicals, shipbuilding, pumps, and fans.

WJ-WS Series GB Standard Ball-Joint Universal Couplings
Ball-joint universal couplings use spherical components instead of a cross shaft to connect the driving and driven shafts. They have a simple structure, compact size, flexible operation, and are easy to maintain, making them suitable for transmitting relatively low torque. They are suitable for shaft angles β≤40° and enable the driving and driven shafts to rotate synchronously.
ACR Series Soft Type
Can replace the SMC RJ series.

PG Series Threaded Straight Reducer
RSFY Series Nut-Rotating Ball Screw

HS-40380 Series and HS-40380-SS
The base of the HS-40380 is made of forged alloy steel. Optional latch plate: HS-40370-LP. The HS-40380-SS and latch plate are made of stainless steel. HS-40380 U-bolt φ1/2.