product — Page 12

SCF Series Standard Cylinder with Valve

SCF Series Standard Cylinder with Valve

This series combines a standard cylinder with a valve and is designed for use with 4M210 and 4M310 valves. Bore sizes 32, 40, and 50 use the 4M210 valve; bore sizes 63, 80, and 100 use the 4M310 valve. One-to-one control eliminates the need for a separate control valve. The series is suitable for distributed use in large systems, and a range of mounting accessories is available. Two operating modes are available: the piston rod can retract or extend when energized. The factory default is for the piston rod to retract when energized. To change this to extension when energized, remove the solenoid valve and reinstall it in the opposite orientation. When removing or installing the solenoid valve, ensure that the sealing O-ring between the valve and the connecting block is in the correct position.

K25J Series Poppet Directional Control Valve

K25J Series Poppet Directional Control Valve

Two-position, five-way pneumatic poppet directional control valve.

3V1 Series Solenoid Valves

3V1 Series Solenoid Valves

3-port, 2-position solenoid valve.

MS2025 Series, Tension and Compression

MS2025 Series, Tension and Compression

Features: Low deflection, high dynamic response frequency, stainless steel or aluminum alloy construction, and bidirectional tension and compression measurement. Applications: Primarily used in force gauges, automated assembly testing, medical testing, robotics, and industrial automation force measurement. TEDS optional.

QZ80 Series Heavy-Duty Cable Chain

QZ80 Series Heavy-Duty Cable Chain

The QZ80 series is an open-frame cable chain with openable crossbars. It runs smoothly and offers high stability.

3V3 Series Solenoid Valve (3-Port, 2-Position)

Dimensional drawings include DIN connector and wire lead versions.

CPS Series Telescopic Miniature Cross-Shaft Universal Coupling

CPS Series Telescopic Miniature Cross-Shaft Universal Coupling

The maximum angle per section is 45°. Connects shafts with a greater separation. The finished bore tolerance is H7; keyways, hexagonal bores, and square bores can also be made on request. Calculation of installation length L and travel X (stroke): travel X≤(Lmax-2L2-B)/2; Lmin≥(Lmax-2L2-L+B)/2; minimum dimension Lmin=L2+B+X+L2. The standard surface treatment is black oxide. Custom non-standard designs and special materials are available to meet the requirements of special operating conditions; please contact customer service for details about custom orders.

1M Series Shenma Standard 45# Steel Spur Gear (1M)

1M Series Shenma Standard 45# Steel Spur Gear (1M)

NHS Series Rod End Spherical Plain Bearings

NHS Series Rod End Spherical Plain Bearings

Maintenance free. Rod body with left or right-hand female thread. Rod body pressed around inner ring. Outer race lined with PTFE composite material. Surface of rod body zinc plated.

DKAF-DKWF Series Single-/Double-Clamping Diaphragm Couplings

DKAF-DKWF Series Single-/Double-Clamping Diaphragm Couplings

Uses a split, double-clamp connection. Performance is identical in clockwise and counterclockwise rotation. Offers high torque rigidity and sensitivity, with a simple structure for easy installation. The stainless steel spring compensates for radial, angular and axial misalignment. Standard surface treatment is used by default; non-standard customization is available, as are custom materials for special operating conditions.

P-PTF-400-02D Series Small Optical Experiment Stand

P-PTF-400-02D Series Small Optical Experiment Stand

Vertical camera mount adjustment; dual-rod construction; the light-source mount can hold multiple light sources simultaneously and supports shooting from any angle.

XYLS06S-6 Series Folding Handle

XYLS06S-6 Series Folding Handle

DZ42-L1 Series Right-Angle Gearbox

PKB Series Five-Way Reducing Threaded Fitting

PKB Series Five-Way Reducing Threaded Fitting

BN Series Flender Air Compressor Coupling Elastomer

BN Series Flender Air Compressor Coupling Elastomer

Made of polyurethane, this elastomer offers a significantly longer service life, stable and reliable operation, high strength, heat resistance, and excellent wear resistance.

KQ2C Series Single-End Fittings

KQ2C Series Single-End Fittings

Release ring colors: gray, blue, black; plastic body colors: gray, black.

CG1 Series Lightweight Cylinder

CG1 Series Lightweight Cylinder

SAO Series Flat Oval Suction Cups

SAO Series Flat Oval Suction Cups

Flat Oval Suction Cups

KQ2LF Series Female Threaded Elbow Fittings

KQ2LF Series Female Threaded Elbow Fittings

Release ring colors: gray, blue, or black; plastic body colors: gray or black.

MHZL2 Series Air Gripper (Parallel Opening and Closing Type)

MHZL2 Series Air Gripper (Parallel Opening and Closing Type)

Parallel opening and closing air gripper.

MS2008 Series Miniature Tension and Compression Load Cell

MS2008 Series Miniature Tension and Compression Load Cell

This high-precision miniature load cell measures both tension and compression, with compression overload protection and a high dynamic response frequency. It is made of stainless steel or aluminum alloy. Applications include button force testing for computers and other consumer electronics, switch and button testing, insertion and extraction force testing, medical testing, and other industrial testing, measurement, and control systems.

HYR Series Bearings

NG Series Anti-Creep Crossed Roller Guideway

PMF Series Female-Thread Bulkhead Straight Connector

RQWI-P Series Right-Angle Connectors

RQWI-P Series Right-Angle Connectors

Material: Nylon. Temperature range: -30 to +100 degrees. English label: Temperature range: From-40 Cto+130°C. Protection rating: IP65.

BF5 Series Flexible Couplings

BF5 Series Flexible Couplings

Intermediate elastomer coupling, assembled by press-fitting the polyurethane sleeve into the hubs on both sides. It has the same rotational characteristics in clockwise and counterclockwise directions. Axial slots ensure concentricity; slotting does not alter the jaw profile and helps maintain balance. The elastomer absorbs vibration, parallel and angular misalignment, and axial movement; it is oil-resistant and electrically insulating. Elastomers are available in 3 different hardnesses and colors. The series is described as providing smooth power transmission, with a length approximately 1/3 that of a conventional coupling.

DSP-3 Series Digital Pressure Gauge

DSP-3 Series Digital Pressure Gauge

506S-D8 Series Handle

506S-D8 Series Handle

TO-PUG Series Straight Reducing Fitting

TO-PUG Series Straight Reducing Fitting

D-F8B Series Magnetic Switch

D-F8B Series Magnetic Switch

3R/4R Series Hand-Operated Valves

3R/4R Series Hand-Operated Valves

S5M Series Rounded-Tooth Timing Belt S5M

S5M Series Rounded-Tooth Timing Belt S5M

Additional catalog specifications (refer to the corresponding specification table): H 3.41

OFV/DFV Series Precision Ground Ball Screws

ZZ90-3 Series Linear Guide Rails

Output options: single-shaft output, dual-shaft output, and custom configurations available.

ASC Series One-Way Flow Control Valve

ASC Series One-Way Flow Control Valve

One-way flow control valve.

PLL-G Series Extended L-Type Threaded Elbow

PLL-G Series Extended L-Type Threaded Elbow

The PLL-G series is an extended L-type (90°) male threaded elbow in the push-in pneumatic fitting range. The push-in tube end accepts PU or nylon tubing directly, while the threaded end has a G (PF) parallel pipe thread that mates with standard female threaded ports. Compared with a standard L-type elbow, it has a longer L2 overall length for routing tubing around obstacles or where a larger bend radius and greater reach are required. Compatible tube outside diameters φD are 4, 6, 8, 10, and 12 mm, with thread sizes G1/8, G1/4, G3/8, and G1/2. Key dimensions include L1 (thread engagement length), L2 (overall length), L3 (distance from the tube-end center to the threaded end face), φD1 (fitting body diameter), and φ (width across flats). The same page also lists metric thread variants PLL04-M5 and PLL04-M6, as well as similar models with R (PT) tapered pipe threads. Note that G and R threads are not interchangeable.

SSAC-V Series Low-Profile Square Rail

HNSD Series Flanged Double Pipe

HS-290308

HS-290308

MOV321 Series Mechanical Valve

MOV321 Series Mechanical Valve

3-port, 2-position mechanical valve.

PCF-N Series Female Straight Connector - NPT Thread

PCF-N Series Female Straight Connector - NPT Thread

CLN Series, Bonded Right-Angle Set-Screw Fixed Type

CLN Series, Bonded Right-Angle Set-Screw Fixed Type

Standard surface treatment is used under normal conditions. Custom non-standard designs and special materials are available to meet the requirements of special operating conditions (please contact customer service for special customizations).

FV/3F/3FM Series Foot Valves

FV/3F/3FM Series Foot Valves

Direct-acting, normally closed type. The 3F series has an aluminum pedal, while the 3FM series has a plastic pedal. Both have a direct-acting, horizontal design. For applications requiring a longer switching hold time, a locking type is available. The locking mechanism is stable and reliable, and releases easily and quickly. However, due to its structural dimensions, it cannot withstand frequent heavy impacts. Grease should be applied regularly to the locking type to ensure proper operation.

ZT47 Series Support Screw Series

ZT47 Series Support Screw Series

PHF Series Tandem Shaft Coupling

PW Series Y-Type Reducing Tee

PW Series Y-Type Reducing Tee

ISC04-M5 Series Miniature Throttle Valve

ISC04-M5 Series Miniature Throttle Valve

KBE Series Linear Motion Slide Units

KBE Series Linear Motion Slide Units

Linear Motion Slide Units