product — Page 15

PX-N Series Y-Type Threaded Tee - NTP Thread

LS516AL Series Oval Aluminum Handle

MY3B Series Mechanically Jointed Rodless Cylinders

YXFR18 Series Short-Plate, Screw-Mounted Hinge
For cold storage; short-plate type; screw-mounted; heavy-duty.

MSV Series Mechanical Valves

ACP Series Ultra-Thin Cylinder
HNSD/HNTSD Series Hydraulic Swing Clamp Cylinder Arm Dimensions
The page title is “HNSD/HNTSD Series Hydraulic Swing Clamp Cylinder Arm Dimensions,” translated into English as “Hydraulic swing clamp cylinder arm dimensions.”

XYFU51 Series, Sealed Type, Resin Type
The magnet is encased in resin to prevent rust. It uses a neodymium magnet for strong holding force in a compact size. Its slim 5.6 mm profile makes efficient use of space. When combined with the L9MPCW30, it is suitable for spray environments where detergents are used.

SDAW Series Ultra-Thin Cylinder
Dual-rod, double-acting, multi-position ultra-thin cylinder.

MSQ Series Rotary Table Gear-Type Rotary Actuator
The page title is “MSQ Series Rotary Table Gear-Type Rotary Actuator.”
RLB Series Nut-Rotating Ball Screw
HD Series Conveyor Belt Technical Specifications

CPK Series Plastic Five-Way Fitting
ZPTK70 Series Steering Gearbox + Speed Reducer
Output options: single-shaft output, dual-shaft output, or custom non-standard configurations

KCR Series Tube Insert Fittings
ZZ90-2 Series Single-Axis Robot
Output configuration: single-shaft or dual-shaft output; custom shafts available.

YLS-SH-D30 Series Solid Support
Solid support, drilled and tapped; end caps welded and polished.

GE Series High-Damping Extended Type

PTC Precision Toothed Screw

CJ1B Series Miniature Cylinder (Single-Acting)
Single-acting, spring return.

HS-50350

YX Series Support Cylinder Retractable Base
This cylinder features a compact structure and rational design. Its retractable base accommodates workpieces of varying thickness and prevents interference while the support cylinder is operating.

MS1075 Series Large Hollow Ring-Type Compression Load Cell
The large hollow ring-type compression load cell features an internal column structure, a low profile, minimal deformation, an IP65 protection rating, and an electroless nickel-plated metal surface. It is suitable for automotive press-fitting, automated assembly, consumer electronics testing, new energy product assembly, medical testing, mold assembly in robotics, and other industrial testing, measurement, and control systems.
XYDK101 Series Pull-Down Latch
XYA01 Series Folding Handle
The dimension drawing is titled XYA01.

CS1-J Series Reed Switch Contact-Type Sensor Switch
The title identifies a reed switch contact-type sensor switch.

FX3070 Series Heavy-Duty Aluminum Alloy Slides
Full extension, dust and sand protection, end stops and plates, side-mounted. Custom bidirectional travel or travel limits available. Suitable for mobile medical shelters, military vehicles, vehicle-mounted generators, special-purpose vehicles, rail transit, aviation, aerospace, drone shelters, and more.

XYLS22 Series Square Pull Handle
Type: Square Pull Handle.
FX3090 Series Heavy-Duty Aluminum Alloy Slides
Full extension, sand and dust protection, end stops and retaining plates, side mounting. Suitable for medical shelters, military vehicles, vehicle-mounted generators, special-purpose vehicles, rail transit, aviation, aerospace, UAV shelters, and more.

MI1056 Series Eight-Channel Amplifier
8-channel, 24-bit high-speed synchronous acquisition chip with 8-channel high-speed 0-10V and 4-20mA analog outputs. Detects sensor disconnection. Simply press a button to zero at startup; individual channels can also be zeroed by button.
TRS-V Series Low-Assembly Series
PHW Series L-Shaped Threaded Swivel Tee

OM Series Open Cable Carrier
Optional one-piece mounting brackets can be installed in either orientation; crossbars can be opened along the outer or inner radius; smooth interior surfaces; small pitch for low vibration and noise; strain relief comb plates can be fitted to the brackets; internal dividers can be added.
KN-PLF Series All-Brass Female Threaded Elbow Fitting

SRH151/SRRH151 Series Steel Medium-Duty Slides
Suitable for financial equipment, industrial electronics, tool cabinets, medical equipment, automotive components, and more. Full extension, detachable/non-detachable, anti-rebound, side-mounted. SRH151: pull-out not available; SRRH151: pull-out available. Blue-white zinc electroplated finish.
XYLS545 Series Handle
Handle section: glass-fiber-reinforced nylon; screw section: brass (threaded insert).

HS-50360 Series Clamp

BXG-PY Series Stainless Steel Y-Tee

PL45 Series 45-Degree Threaded Elbow

LLB Tire Coupling Elastomer
This is a highly flexible coupling offering excellent shock absorption and cushioning, as well as superior compensation for axial misalignment. It operates at temperatures from -20 to 80°C, with a speed/torque range of 10–20,000 Nm. It is suitable for humid, dusty, impact-prone and vibration-prone environments, as well as applications involving frequent starts and frequent changes in direction of rotation. It is easy to assemble and disassemble. Its one-piece tire-shaped elastic element requires no lubrication and is durable and reliable.

MRHQ Series Vane-Type Rotary Actuator

ML Series Star-Shaped Elastic Coupling Cushion
ML series star-shaped elastic coupling cushions are made of polyurethane with a hardness of 98°. They offer excellent elasticity and wear resistance, and are suitable for cushioning couplings in various types of transmission machinery. Available in sizes ML1 to ML13, with outer diameters of 48–391 mm, inner diameters of 19–250 mm, thicknesses of 12–55 mm, and moduli of 4–12. Custom sizes are available.

HW Series Type Cage

FRC Series Two-Piece Air Preparation Units
The working medium is compressed air. The unit may be pipe-mounted or bracket-mounted and must be installed vertically within ±5°.

KQ2R Series Reducing Plug Connectors
Release ring color options: gray, blue, or black. Plastic body color options: gray or black.

LS608 Series Handle
SFI/SF Series – Precision-Ground Series

LS511J Series Rubber-Coated Round Handle
The model table lists rubber-coated round handles and rubber-coated round handles with a base.