product — Page 14

MHS4 Series Pneumatic Grippers
The MHS4 series pneumatic gripper is a multi-jaw actuator with synchronized opening and closing. Compressed air drives a reciprocating piston, which moves the jaws along guide rails in unison to grip, position, sort and handle workpieces. It is commonly used in robot end-of-arm tooling, assembly lines, loading and unloading, and inspection stations. The body is typically made of anodized aluminum alloy, while the jaws and piston rod are stainless steel. A built-in magnetic ring allows magnetic sensors to detect the fully open and closed positions. The series is available in five bore sizes: Φ25, Φ32, Φ40, Φ50 and Φ63. Models are designated MHS4-Φ[bore diameter]D; larger bores provide greater gripping force. Mounting holes vary by bore size: Φ25 has 2-Φ3.4 through holes with Φ6.5 counterbores, 10 deep; Φ32 has 2-Φ4.5 through holes with Φ8 counterbores, 9 deep; Φ40 has 2-Φ5.5 through holes with Φ9.5 counterbores, 14 deep; and Φ50 and Φ63 both have 4-Φ5.1 through holes with Φ9.5 counterbores, 12 deep. Dowel pin holes on the bottom of the body enable precise positioning during repeated removal and reinstallation.
SFG-V Series Flexible Coupling · Single-Diaphragm Type
PKD Series Five-Way Reducing Threaded Fitting

ZT21 Series Gripper Pad (Round)
Display name: Gripper Pad (Round).

SU Series Standard Cylinders

HXSD-T Series T-Type Hose Connector
Material: TPE rubber. Operating temperature: -40 to +100°C. Certification: RoHS compliant. Flame-retardant rating: UL94 V0 HB. Ingress protection rating: IP66. Colors: black and gray; other colors available to order.

PD-G Series Male Branch Tee – G Thread

SCA Series Throttle Valve

MS2005 Series Tension and Compression
Features low deflection, high dynamic response frequency, stainless steel construction, and bidirectional tension and compression measurement. Primarily used in industrial automation applications such as automotive press-fitting, automated assembly, consumer electronics testing, new energy product assembly, medical testing, robotics, and mold assembly.

JCQ Series Compact Cylinder

HXSD-JH Series Hose Coupling
Material: PA6 nylon. Operating temperature: -40 to +120°C. Certification: RoHS compliant. Flame-retardant rating: UL94 V0/V2. Protection rating: IP68. Colors: black and gray; other colors can be customized.

BXG-PLF Series Stainless Steel Female Threaded Elbow

16A Series 1-inch (16A) Shenma Finished Bore Sprocket
The sprocket is machined from 45# round steel, with induction-hardened teeth and a black oxide finish. All models listed in the table are in stock and available for same-day shipping. Packaging options: cartons, wooden crates, or pallets.

BXG-POC Series Cylindrical Hex Socket Connector

SAOR Series Vacuum Connection Suction Cups
Suction cups with horizontal vacuum connection, without cushioning; suction cups with horizontal vacuum connection, with cushioning.

CPOC Series Round-Thread Straight Connector
Round-Thread Straight Connector
PED Series T-Type Side-Threaded Tee

QGA(B) Series Standard Cylinders
This cylinder series has bore sizes from Φ32 to Φ400 and includes QGA non-cushioned cylinders and QGB cushioned cylinders. Cylinders from Φ32 to Φ100 use high-quality aluminum alloy barrels, while those from Φ125 to Φ400 use precision-ground steel barrels. The cylinder end caps are die-cast, and the piston rod surfaces are roller-hardened, hard chrome-plated, and precision-ground. The seals operate normally without an oil supply.
FKX-330-L2 Series Planetary Gearbox
Compatible motor input interface dimensions (input dimensions are shown on the left).

MER-GX Series Industrial Cameras

MPT Series Air-Hydraulic Booster Cylinder
XYCL132-3 Series L-Shaped Screwless Hinge
SAH Series High-Assembly Linear Guideway

APL-N Series Plastic Push-in Fittings
Plastic Push-in Fittings

DGS Series Aluminum Alloy Oldham Short Clamping Coupling Series
The hubs are made of high-strength aluminum alloy. The sliding element is made of imported PA66, which offers excellent wear resistance, corrosion resistance, and electrical insulation. The sliding design compensates for radial and angular misalignment. The detachable design makes installation easy. Secured with clamping screws.

MHZ2 Series Pneumatic Gripper
MHZ2 Series Pneumatic Gripper; MHZ2 is a parallel-opening/closing type.
JV-280-90 Series Technical Specifications

MAL Series Aluminum Alloy Mini Cylinder
The title reads “MAL Series Aluminum Alloy Mini Cylinder,” and the English label reads “MAL Series slim cylinder”.

QE Series Quick Exhaust Valve

DGFN Series with Brake Disc, Type DGFN
The DGFN shaft coupling with brake disc is designed for use with disc brakes. The brake disc and elastomer can be replaced while installed. The brake disc must be mounted on the shaft end with the greatest moment of inertia. The maximum torque must not exceed the coupling’s maximum torque. Finished bore tolerances conform to ISO H7.

P-GNA-2 Series Standard Gigabit Network Adapter
Key features: 10/100/1000 Mbps auto-negotiating connectivity; PCI Express (PCIe) 2.1 x1 lane; up to 8 transmit and receive queues per port; 32 flexible I/O virtualization and QoS virtual ports; PCI-SIG Single Root I/O Virtualization and Sharing (SR-IOV) Specification Rev. 1.1; extra-thick gold-plated RJ45 connectors; compact, integrated RJ45 connector design; low-profile and full-height configurations.

KCE Series Female-Threaded Bulkhead Fittings
KCE series female-threaded bulkhead fittings are KC series pneumatic push-in fittings designed to connect tubing through a panel or equipment wall. They have a female-threaded port at one end and a push-in tubing port at the other, and are secured to the panel with a locknut. They prevent air from flowing out of the fitting when the tubing is disconnected. The body is made primarily of steel with an ultra-hard surface treatment and does not release copper ions, making it suitable for clean environments sensitive to copper ions. The maximum operating pressure is 1.0MPa. The fittings are suitable for nylon and PU tubing and come standard with compression sealant. KC series products must be used with KCR tube insert fittings. Common applicable tube O.D. sizes range from φ4 to φ12mm, with thread sizes including M5×0.8, 1/8, 1/4, 3/8 and 1/2.

HAD402 Series Automatic Drain
When installing the drain hose, use a hose with an inner diameter of at least Φ10 mm and a length no greater than 5 m. Do not allow the hose to bend upward. The compressor power must be greater than 3.7 kW.

ZJ-LS-A-N1 Series Damped Handle
Damped handle.
MCF-MM Series Solenoid Pulse Valve (Submerged Type)
Submerged type.

CQSB Series Compact Cylinder
CQSB Series compact cylinder
OFU/DFU Series (DIN 69051 FORM B) Precision Ground Grade Series

MS3067-C Series Single-Point Sensor
Features: ZR-axis force control accuracy deviation, symmetrical strain gauge assembly, bidirectional overload protection module, high-precision mounting module, and closed-loop signal processing module. Applications: integrated rotary tightening and linear press-fitting processes on automated production lines, and gripping force control for robotic end-of-arm rotary grippers.

XYAP21/23 Series Curved Handle
Type: Curved. Material: PC. Applications: Testing equipment and communications equipment. Caution: Use at room temperature; recommended screw tightening torque: 2.6N·m; thoroughly verify before using thread-locking adhesive or other sealants. The product is made of amorphous resin and is not suitable for use with thread-locking adhesive. Avoid using it.

MS5004 Series 3-Axis Force Sensor
This stainless steel 3-axis force sensor offers high accuracy, strong resistance to off-axis loads, and low crosstalk. Its integrated design is easy to install, and custom specifications are available. It is used in robotic arms to control forces in multiple directions.

MXS Series Pneumatic Slide Table (Cross-Roller Guide)/Dual-Cylinder Type
Cross-roller guide, dual-cylinder type.

DT10 Series Toothed Belt Series
Ordering example: SPUG toothed belt, DT10 model.

DP-570/645 Series Mobile Base
Casters: quiet swivel / with brakes.
PCF Series Female Thread Straight Fitting

080/090 Series Solenoid Valve Coils
Terminals fitted with DC coils have a polarity-sensitive indicator light. Connect “1” to the positive terminal and “2” to the negative terminal. If the connections are reversed, the indicator light will not illuminate, but the valve will still operate.

CJP Series Pin Cylinder (Single-Acting)
ERTS Series High-Speed Bearings
ZL112 Series Multi-Stage Vacuum Generators
The 3-stage diffuser increases suction flow by up to 250% and reduces air consumption by 20%. Available with a valve, vacuum gauge, or pressure switch. Includes a built-in vacuum filter and silencer. Can be mounted in three orientations (top, bottom, or side).