product — Page 19

CS1-S Series Magnetic Switch
CS1-S series magnetic switches (magnetic proximity switches) detect piston position in pneumatic cylinders. The switch fits into a groove on the outside of the cylinder barrel and outputs a switching signal when the magnetic ring on the piston passes by. It can be connected directly to a PLC input or relay for end-of-stroke detection and sequence control. The series offers multiple body shapes and cable configurations, alongside models such as CS1-U, CS1-F, CS1-G, D-A73, D-Z73, D-C73, and D-A93, to suit cylinders with different bore sizes and groove designs. A common mounting thread is M5, the rated voltage is DC24V, and wiring configurations include G. When selecting a switch, confirm the cylinder groove dimensions, cable exit direction and length, contact type (2-wire/3-wire, NPN/PNP), and operating voltage.

CS1 Series Standard Cylinders
CS1 series standard cylinders (medium-to-large bore type) are double-acting and suitable for general industrial pneumatic applications. An air-oil version is also available; the pneumatic version uses air as its working medium, while the air-oil version uses turbine oil. The 13 bore sizes range from Φ32 to Φ300 mm: 32, 40, 50, 63, 80, 100, 125, 140, 160, 180, 200, 250 and 300 mm, providing a range of low-to-high thrust outputs. Maximum operating pressure is 0.9 MPa, and minimum operating pressure is 0.05 MPa (0.06 MPa for the air-oil version). Piston speed is 50~500 mm/s, or 0.5~200 mm/s for the air-oil version. The operating temperature range is 0~70 ℃ (5~60 ℃ for the air-oil version); prevent moisture from freezing at low temperatures. The catalog also provides overall and mounting dimensions for each bore size (A, AA, B, C, CC, CD, CJ, D, E, F, H, I, J, K, L, N, O and N+O+90°, among others) to support product selection, calculations and installation design. These cylinders are widely used in automated applications such as fixture clamping, workpiece pushing and valve actuation.

CS1 Series Sensor Switches
The CS1 series sensor switches include models CS1-F, CS1-U, CS1-S, CS1-J, CS1-M and CS1-G. The catalog also lists the D-C73. These switches detect the position of cylinders or moving parts in automated equipment and output an electrical signal. Catalog specifications include switching distance, sensor switch type, operating voltage, maximum switching current, maximum vibration capacity, internal current consumption, forced-on voltage drop, indicator light, cable length and sensing voltage. The D-C73 has a green indicator light. Most cells in the technical specifications table on this page are blank; refer to the product specification sheet or subsequent pages for actual values.

CS1 Series Reed Switch Contact-Type Sensor Switch
The CS1 series reed switch contact-type sensor switches include the CS1-J, CS1-G, CS1-F, and CS1-U subseries. They are designed for position detection of cylinders or moving parts in automation equipment. Using reed switch technology, the series provides contact output and is available in two-wire versions with an indicator (normally open) or without an indicator (normally open). The default cable length is 020 (2 m), and the standard temperature rating applies. The cable end is fitted with a three-pin male straight quick connector with a rotatable nut; the matching female connector must be ordered separately. The model code consists of the sensor switch number, specifications, type, cable length, and temperature rating to simplify product selection.

CS1-U Series Magnetic Switch
The CS1-U series magnetic switch is a pneumatic accessory mounted on the outside of a cylinder barrel to detect piston position. It contains a magnetically sensitive element whose contacts actuate and output a signal when the magnetic ring on the piston enters the sensing area. The signal can be used by control circuits such as PLCs, relays or solenoid valves to detect cylinder stroke endpoints or intermediate positions for automated control. This series is typically secured in the cylinder's mounting slot using an M5 or similar mounting thread, and DC24V is a common operating voltage. Selection should take into account the cylinder bore, mounting slot type, lead wire exit and output type. The switch's operating range and response frequency should also meet the required cycle rate.

CY1B/CY3B Series Magnetically Coupled Rodless Cylinders
The CY1B/CY3B series comprises basic magnetically coupled rodless cylinders without a switch mounting rail. With no exposed piston rod, they save installation space and are suitable for long-stroke automation equipment where space is limited. Bore sizes are 10, 15, 20, 25, 30 and 40mm. Magnetic holding force options are high holding force H and low holding force L. Stroke is customized to requirements. Magnetic switch options include no switch, 1 switch, 2 switches or n switches. The model code consists of the series, bore size, magnetic holding force and stroke, separated by spaces. The series includes two basic types, CY1B and CY3B, with CY3B being the upgraded magnetically coupled type. Distinguish these from other rodless cylinder series, such as CY1R/CY3R, CY1S, RMH, MY1B and MY1H.

CY1L Series Magnetically Coupled Rodless Cylinder
The CY1L series magnetically coupled rodless cylinder uses a magnetic coupling drive with no mechanical connection between the piston and the external slider. Compressed air enters the cylinder tube and moves the piston with its built-in magnetic ring, which drives the external slider in a straight line by magnetic force. The cylinder tube is fully sealed, with no protruding piston rod, making the unit compact and suitable for long-stroke applications where mounting space is limited. Bore sizes are 6、10、15、20、25、32、40mm. The cylinder is double-acting and uses air as its working medium. Maximum operating pressure is 0.7MPa and minimum pressure is 0.18MPa. Ambient and fluid temperature is -10~+60℃ (no freezing), and cleaning speed is 50~1000mm/s. Rubber cushions or hydraulic shock absorbers are available at both ends. Mounting orientation is unrestricted, and port sizes are Rc M8~0.8、1/8、1/4. Standard strokes range from 50mm to 1000mm depending on bore size, with extended strokes of 300~2000mm available; non-standard strokes can also be customized. The cylinder body has a mounting rail for magnetic switches and can be fitted with switches such as the A73. A lead wire length code is appended to the switch model number (no code -0.5m、L-3m、Z-5m). Suitable for factory automation applications such as handling, pushing, and positioning

CY1R/CY3R Series Magnetically Coupled Rodless Cylinders
The CY1R/CY3R series consists of magnetically coupled rodless cylinders with no mechanical connection between the piston and slider. They are suited to long-stroke automated conveying and handling applications where installation space is limited. Bore sizes range from Φ10 to Φ40 mm, with a choice of high holding force H or low holding force L magnets. The stroke can be specified as required, such as 250 mm. Magnetic switches such as the M9BW are available, with a choice of 1 switch (S), 2 switches, or no switches. The basic type has no switch rail; the switch rail incorporates a magnet. The compact design is easy to maintain.

CY1R Series Rodless Cylinders
The CY1R series consists of magnetically coupled rodless cylinders with air-operated, double-acting operation. The standard model is available in four bore sizes: 6, 10, 50, and 63 mm. Maximum operating pressure is 0.7 MPa, minimum operating pressure is 0.18 MPa, piston speed is 50~500 mm/s, and ambient and fluid temperatures are -10~+60℃ (no freezing). The cylinder has a standard shaft mounting arrangement at both ends. The stroke can be selected to suit the required travel distance, with a stroke length tolerance range of 0~250 mm. The series is suitable for linear reciprocating drives, workpiece transfer, and positioning mechanisms in automated equipment where installation space is limited. Magnetic switches can be fitted to detect end-of-stroke positions. When selecting a cylinder, first determine the bore size based on the load and required thrust, then select the stroke based on the travel distance, and verify that the operating pressure and speed are within the specified ranges.

CY1RG Series Rodless Cylinders
The CY1RG series consists of magnetically coupled rodless cylinders that transmit force between the piston and external slider through magnetic coupling. With no mechanical piston rod, they offer a short overall length and compact footprint, making them suitable for long-stroke linear motion and installations where space is limited. Three bore sizes are available: 10, 50, and 63mm. The CY1RG10 has a stroke range of 50~500mm, an M5×0.8 port thread, an M3×0.5 mounting thread, and an M4×0.7×6 protruding thread. The CY1RG50 and CY1RG63 have a stroke range of 50~2000mm, an Rc1/4 port thread, an M8×1.25 mounting thread, and an M10×1.5×15 protruding thread. The catalog provides complete overall and mounting dimensions, including B, C, CB, CR, D, F, G, GP, GW, H, HA, HC, HP, HR, HS, HT, K, L, LD, M, MM, N, P, PW, Q, QW, T, W, WS, X, Y, Z, HB, TC, and WP, for direct use in mechanical design and installation planning. Magnetic switches can also be used for position detection.

CY1S Series Magnetically Coupled Rodless Cylinders
The CY1S series consists of magnetically coupled rodless cylinders that use magnetic coupling to transmit the piston’s linear motion to an external slider without a piston rod. Their compact design, long stroke and small footprint make them suitable for automated equipment with limited space or requiring long-stroke linear motion. The standard specifications table on this page lists bore diameters of 6, 10, 15, 20, 25, 32, 40, 50 and 63 mm. The dimensional table provides mounting and overall dimensions for CY1S6, CY1S10, CY1S15, CY1S20, CY1S25, CY1S32 and CY1S40. Stroke ranges vary by bore size: up to 300 mm for CY1S6/CY1S10, up to 750 mm for CY1S15 and up to 1500 mm for CY1S20~CY1S40. The performance table for operating pressure, speed, temperature and other parameters was not filled in in the source.

CY1S Series Magnetically Coupled Rodless Cylinder
The CY1S series magnetically coupled rodless cylinder transmits force through magnetic coupling without an exposed piston rod, making it suitable for long strokes and confined spaces. The basic model has no switch rail and is available in bore sizes Φ10, Φ15, Φ20, Φ25, Φ30, and Φ40 mm, with stroke specified as required. Magnetic holding force options are high holding force H and low holding force L. It can be configured with no magnetic switches, or with 1, 2, or n magnetic switches; the switch rail has a built-in magnet. Compact and easy to install, it is commonly used in automated handling, pushing, pulling, and positioning mechanisms.

CY3B/CY3R Series Magnetically Coupled Rodless Cylinders
The CY3B/CY3R series consists of magnetically coupled rodless cylinders that use magnetic coupling between the piston and slider. They are suitable for long-stroke linear reciprocating applications where space is limited. The catalog lists five bore sizes: 15, 20, 25, 32, and 40 mm. The operating medium is air (non-lubricated), with a maximum operating pressure of 0.7 MPa, a minimum operating pressure of approximately 0.12~0.16 MPa, and an ambient temperature range of -10~+60℃ (without freezing). CY3R is a side piping type, with a centralized piping type (CY3RG) also available. The page provides external and mounting dimensions, including A, B, C, D, H, HP, and HT, for the CY3R15~CY3R40 and CY3RG series to facilitate equipment layout and installation design.

CY3B/CY3R Series Magnetically Coupled Rodless Cylinders
The CY3B/CY3R series features magnetically coupled rodless cylinders. Magnetic coupling provides rodless operation in a compact design that saves installation space. Suitable for applications such as automated production lines, material handling, and assembly, the series is available in a range of bore sizes and can be fitted with magnetic switches for position detection. It offers smooth operation, reliable sealing, and a long service life, making it a popular actuator for industrial automation.

CY3B Series Magnetically Coupled Rodless Cylinder
The CY3B series magnetically coupled rodless cylinder transmits motion through magnetic coupling, with no mechanical linkage between the piston and external slider. The full cylinder length is the effective mounting length, making the compact, space-saving design especially suitable for long-stroke applications with limited installation space. Seven bore sizes are available: Φ6, Φ10, Φ15, Φ20, Φ25, Φ32 and Φ40mm. Port options are threaded (blank) and unthreaded (B). The stroke is specified as required; the catalog example is 300mm. The basic model has no switch mounting rail, but magnetic switches can be mounted on the cylinder body to detect piston position. Lightweight, smooth-running and easy to maintain, this series is suitable for factory automation applications such as handling, pushing and positioning.

CY3L Series Magnetic Coupling Rodless Cylinder
The CY3L Series Magnetic Coupling Rodless Cylinder uses magnetic coupling to drive a rodless piston. It is suitable for linear motion, material handling, clamping, and other applications on automated production lines. Its compact design and rodless construction save installation space, while offering reliable sealing, a long service life, and easy maintenance. Bore sizes typically range from small to medium, and strokes can be customized to meet specific requirements. These cylinders are widely used in automation equipment across the electronics, packaging, automotive, and other industries.

CY3R Series Magnetically Coupled Rodless Cylinder
The CY3R series is a range of magnetically coupled rodless cylinders. A magnetic ring on the piston couples with a magnetic ring on the external slider, transferring the piston's linear motion to the slider without contact. The cylinder tube requires no opening, eliminating leakage and providing a compact design with a small installation footprint. These cylinders are suitable for long-stroke pushing, pulling, positioning and conveying applications in clean and dusty environments. Bore sizes are Φ6, Φ10, Φ15, Φ20, Φ25, Φ32 and Φ40mm. The stroke is specified in millimeters (300mm in the catalog example). Structural variants include the basic type (without switch rail), flange type (upgraded magnet type) and magnet-free type (upgraded magnet type). Port thread options are threaded (blank) and unthreaded (B). To select a model, combine the codes in the order “series number-bore size-port thread-stroke,” for example, CY3R-25-300. Related variants include CY3S and CY3B, which can be used with magnetic switches and guide mechanisms.

CY3S Series Magnetically Coupled Rodless Cylinder
The CY3S series magnetically coupled rodless cylinder uses magnetic force to transmit motion, with no mechanical connection between the piston and the external slider. It provides long-stroke reciprocating motion without a piston rod, offering a compact design that requires minimal installation space. Bore sizes include Φ6, Φ10, Φ15, Φ20, Φ25, Φ32, and Φ40. Port thread options are blank for threaded and B for unthreaded. The stroke is selected to suit the application (catalog example: 300mm). Configuration options include a switch mounting rail (no symbol: without switch; O: with switch) and the basic D type. It is widely used for linear actuation in automation equipment, packaging, material handling, and other applications.

CY3S Series Magnetically Coupled Rodless Cylinders
The CY3S series features magnetically coupled rodless cylinders. Magnetic coupling drives the carriage without an extending piston rod, creating a compact design suited to reciprocating linear motion in clean environments and automated equipment. The model code CY3S-12D1M9B, for example, includes segments for the series, bore size, cushioning type, stroke, and sensors. Refer to the product catalog for specific specifications.

CZ-35/45 Series Miniature Cantilever System
The CZ-35/45 Series Miniature Cantilever System is made of die-cast aluminum alloy with a powder-coated finish. It is designed to suspend or support small control enclosures (under 7 inches). The system includes horizontal and vertical brackets, a base, and a swivel base, each with a horizontal rotation range of 0–320°. Designed for use with 35 × 45 mm aluminum tubing, standard tube lengths are 0.25 m, 0.5 m, and 1 m; custom lengths are also available on request. Its lightweight construction and stylish appearance make it ideal for industrial automation control cabinets, operator panels, and similar applications.

CZ-40/50 Series Miniature Support Arm System
Designed for use with 40 × 50 mm aluminum tubes, this miniature support arm system is used to suspend or support small control enclosures (7-inch). The tubes and components have a powder-coated finish, and all components are made using die-cast aluminum alloy. While ensuring strength and a well-designed structure, the system also places a strong emphasis on a modern appearance. The product range includes enclosure mounts, right-angle enclosure mounts, corner joints, top mounts, horizontal arms, base mounts, and other components. It can be paired with aluminum tubes in various lengths (0.25 m, 0.5 m, or 1 m; custom lengths are available). All components are made of die-cast aluminum alloy and can rotate horizontally through 0–320°. They are suitable for supporting and positioning industrial control enclosures.
CZ-45/60 Series Light-Duty Cantilever Components
The CZ-45/60 Series Light-Duty Cantilever Components are modular components for supporting and positioning industrial automation equipment. Made from die-cast aluminum alloy, they are lightweight yet strong. The series includes a range of components, such as right-angle box mounts, raised top mounts, horizontal wall mounts, right-angle corner joints, vertical wall mounts, base mounts, rotary base mounts, and 15° rotary box base mounts. They can rotate horizontally through 0–320° to accommodate different installation angles. Suitable for cantilever structures carrying light loads, they are used around robots, on conveyor lines, with inspection equipment, and in similar applications.

CZ-45/60 Series Light-Duty Cantilever Components
This series of light-duty cantilever components uses 45 × 60 mm aluminum tubes to suspend or support small 7–10-inch control enclosures. The tubes and components have a powder-coated finish. All components are manufactured using aluminum alloy die casting, combining strength and sound structural design with an attractive appearance. The range includes enclosure mounts, right-angle enclosure mounts, bases, rotating bases, aluminum tubes, and other component types. Mounting hole spacing is available in 57 × 57 mm or 80 × 80 mm. The assembly can rotate horizontally through 0–30° or 0–320°, making it suitable for installing equipment in industrial environments.

CZ-45/60 Light-Duty Cantilever Components
The CZ-45/60 light-duty cantilever component series includes accessories such as bases, swivel bases, and horizontal wall mounts. Made of die-cast aluminum alloy, the components weigh between 0.6 kg and 3.3 kg. The base offers horizontal rotation through 0–320°, while the horizontal wall mount rotates through 0–180°. This series is designed for building light-duty cantilever systems and is available with ordering codes in a range of specifications to suit different installation needs.

CZ-45/60 Light-Duty Cantilever Assembly
The CZ-45/60 and CZ-55/75 light-duty cantilever assemblies include components such as a base, a rotating base, and a horizontal wall mount. The base is made of die-cast aluminum alloy, offering low weight and high strength. The rotating base swivels horizontally through 0–320°, while the horizontal wall mount swivels through 0–180°. These assemblies are suitable for support and positioning on industrial automated production lines.

CZ-50/180 Series Control Cabinet Stand
This control cabinet stand is made of high-quality anodized aluminum profiles and die-cast aluminum components. Its clean, simple appearance combines with a lightweight yet sturdy design. The column is anodized for a seamless match with the control cabinet. Its curved front creates a consistent 7° backward tilt for ergonomic operation. The base has a dark gray powder-coated finish suited to industrial environments. The stand is compatible with CZ-120, CZ-140, CZ-150, CZ-180, CZ-210 and other series of control cabinets. Base casters or support feet are included as standard and do not need to be ordered separately. Two sizes are available: the smaller model is 600 mm wide, 480 mm high and 80 mm deep, with an overall height of 680 mm (excluding casters); the larger model has an overall height of 1,100 mm with casters, and measures 600 mm wide by 650 mm deep. Cable outlets are available in two configurations: A (at the rear, below the column) and B (centered underneath the base). A flexible conduit connector can be fitted. Materials: 6063 aluminum alloy column; Q235 steel plate base. Colors: natural anodized aluminum or rock-gray powder coating for the column; rock-gray powder coating, approximately RAL 7012, for the base.

CZ-55/75 Series Medium-Duty Support Arm System
This series of medium-duty support arm components includes 55 × 75 mm aluminum tubes for suspending or supporting control enclosures. The tubes have a powder-coated finish, and all components are made using aluminum alloy die-casting. The design balances structural strength with an emphasis on appearance. The series includes a range of connectors, such as enclosure connectors, 90° enclosure connectors, 90° cast elbows, top mounts, horizontal beams, intermediate connectors, vertical wall mounts, bases, rotatable bases, rotatable 90° elbows, 15° inclined connectors, and 7° inclined connectors, as well as 5575 aluminum tubes in various lengths. All connectors can rotate horizontally through 0–320°. The top mount and rotatable base are available with several mounting hole spacing options.
CZ-55/80 Series Medium-Duty Cantilever Arm Components
The CZ-55/80 Series medium-duty cantilever arm components are designed for use with 55 × 80 mm aluminum tubes to suspend or support medium-sized control enclosures. The aluminum tubes and components have a powder-coated finish, and all components are made using aluminum-alloy die casting. Designed to provide strength and a sound structure, the series also features a distinctive appearance. It includes a range of components: enclosure base, right-angle enclosure base, right-angle joint, top mount, raised top mount, horizontal wall mount, intermediate section, vertical wall mount, base, rotating base, 90° rotating joint, rotating enclosure base, and more. Each component can rotate horizontally through 0–320° to accommodate different installation angles. All components are made of die-cast aluminum alloy and weigh between 0.83 and 3.4 kg.

CZ-55/80 Series Medium-Duty Cantilever Arm Components
Designed for use with 55 × 80 mm aluminum tubes, this series of medium-duty cantilever arm components is used to suspend or support medium-sized control enclosures. The aluminum tubes and components have a powder-coated finish. All components are die-cast from aluminum alloy, combining strength and a well-designed structure with a distinctive appearance. The components can rotate horizontally through 0–320°. Available types include enclosure bases, right-angle enclosure bases, raised top mounts, horizontal mounts, vertical mounts, base plates, rotating mount brackets and rotating enclosures. Standard aluminum tube lengths are 0.25 m, 0.5 m, 1 m, 1.5 m and 2 m; custom lengths are available. The mobile base is made of Q235 steel and comes standard with rubber wheels and a base plate.

CZ-60/85 Series Medium-Duty Support Arm Components
This series of medium-duty support arm components includes 60 × 85 mm aluminum tubes for suspending or supporting medium-sized control enclosures. The tubes and components have a powder-coated finish. All components are made using aluminum alloy die-casting, combining strength and a practical design with a distinctive appearance. Components include small and large enclosure mounts, right-angle mounts, swivel joints, top mounts, horizontal mounts, base mounts, swivel bases, right-angle adapters, and enclosure adapters. They allow horizontal rotation of 0–320°. Tube lengths can be customized; standard lengths are 0.25 m, 0.5 m, 1 m, 1.5 m, and 2 m.

CZV01 Series Screw Support Units
CZV01 series screw support units with all-nylon bases are made of S45C steel with a chrome-plated surface. Available in a range of sizes to suit different installation requirements, they offer load capacities from 600 kg to 1,500 kg and reference weights from 0.08 kg to 0.57 kg. Suitable for supporting and securing transmission systems in automation equipment, machine tools, and other applications.

D-A72 · D-A73 · D-A80 Series Magnetic Reed Switches with Contacts
The D-A72, D-A73, and D-A80 series magnetic switches use a reed-switch contact design and are suitable for rail mounting. They are compatible with loads such as relays and PLCs, with load voltage ratings of AC 200 V or DC 24 V/AC 100 V and load currents of 5–10 mA or 5–20 mA. The switches have a low internal voltage drop (below 2.4 V for the D-A72 and below 0.8 V for the D-A73/D-A80) and feature a red LED indicator (lit when the switch is on). CE certified for electrical safety, the models vary in load voltage, current, and protection circuit, but all are normally open with two-wire output. The cable end has a 3-pin male straight quick connector with a rotatable nut; the matching female connector must be ordered separately. These switches are widely used in automation equipment for applications such as cylinder position detection and fixture positioning.

D-A73 Series Magnetic Switch
The D-A73 series magnetic switch is a position sensor mounted in a groove on a pneumatic cylinder barrel. It detects the permanent magnetic ring on the cylinder piston to determine the piston's position and sends a position signal to a PLC or solenoid valve control circuit. The appropriate snap-in mounting style is selected according to the cylinder's outside diameter and groove specifications. The switch clips directly into the barrel groove for easy installation and adjustment without an additional bracket. It has a two-wire connection, typically operates at DC24V, and features an indicator light for easy on-site confirmation of the switching status. Alongside similar magnetic switches such as the D-Z73, D-C73, and D-A93 series, it meets requirements for different sensing sensitivities, wiring configurations, and lead lengths. Common applications include cylinder end-of-stroke detection, fixture clamping confirmation, and position feedback on automated production lines. When selecting a switch, consider cylinder groove compatibility, operating voltage, wiring configuration (two-wire/three-wire), lead length, and protection rating.

D-A73 Series Reed Switch
The D-A73 Series reed switch is designed for rail mounting and features a built-in red LED that lights when the switch is on. It is suitable for relay and PLC loads, with a load voltage of 24 V DC or 100 V AC and a load current of 5–20 mA. The internal voltage drop is less than 0.8 V. No protective circuit is included. The product is CE certified and is widely used for position detection and signal output in automation equipment.

D-A80 Series Reed Switches
D-A80 series reed switches are suitable for loads such as relays, PLCs, and IC circuits, and support rail mounting. The load voltage is 24 VAC or less and 48 VAC; the load current is 50 mA/40 mA. Internal resistance is 1 Ω or less (including a 3 m cable). A red LED indicator lights when the switch is on. CE certified, this compact, reliable series is widely used for arrival detection and position control in automation equipment.

DCS11025 Series
The DCS11025 Series is a 110 x 110 x 25 mm AC axial fan featuring a shaded-pole induction motor, a PBT thermoplastic impeller (UL94-V0), and an aluminum alloy frame. It operates in temperatures ranging from -10°C to +85°C and weighs 310 g. Sleeve and ball bearing options are available. Voltage options are 100/125 V, 200/240 V, and 380/420 V, with a frequency of 50/60 Hz, speeds of 2200/2500 RPM, airflow of 102/120 CFM and 60/71 m³/h, noise levels of 36/38 dBA, and power ratings of 13/17 W. Suitable for ventilation and cooling in electronic equipment, industrial control cabinets, and other applications.

DCS12032 DC Cooling Fan
The DCS12032 is a DC cooling fan measuring 120 × 120 × 32 mm. It features sleeve bearings and a plastic impeller and frame (UL94V-0 flame-retardant rating). It is available with rated voltages of 12 V and 24 V, with operating voltage ranges of 6.0–13.5 V and 18–26.5 V, respectively, offering different speeds and airflow rates. Maximum speed is 2,500 RPM, maximum airflow is 0.803 m³/min, maximum air pressure is 50.6 mmH₂O, and noise is as low as 20.4 dBA. The fan weighs 219.7 g. Connect the red wire to positive and the black wire to negative. Suitable for cooling electronic equipment, telecommunications cabinets, power supplies, and more.

DCS12038 Series Axial Fans
The DCS12038 series comprises 120 × 120 × 38 mm DC axial fans with plastic impellers and frames (UL 94 V-0 flame-retardant rating). Sleeve-bearing and ball-bearing versions are available. They support rated voltages of 5 V, 12 V, 24 V, and 48 V, with various speeds, airflow rates, air pressures, and noise levels. Suitable for cooling electronic equipment, ventilation systems, and other applications.

DCS13040 DC Cooling Fan
The DCS13040 series is a 130 × 130 × 40 mm DC axial cooling fan featuring a sleeve bearing and a plastic impeller and frame with a UL94V-0 flame-retardant rating. It is available in 5 V, 12 V, and 24 V versions, with several speed options (2000/2500/2800/3800 RPM) for each voltage. Airflow ranges from 1.07 m³/min to 2.05 m³/min, air pressure from 25.8 mmH₂O to 103.2 mmH₂O, and noise from 53.2 dBA to 65.4 dBA. Suitable for cooling electronic equipment, ventilating cabinets, and other applications.

DCS13538 Series AC Axial Fans
The DCS13538 series of AC axial fans is manufactured by Shenzhen Dongchaosheng Technology Co., Ltd. The fans measure 135 × 135 × 38 mm. The blades are made of flame-retardant PBT (UL94-V0), and the frame is aluminum alloy. AWG #22 UL1007 lead wires are available as an option. The motor is a shaded-pole induction motor. The operating temperature range is -10°C to +85°C, and the fans weigh 550 g. The series supports three voltage ranges: 100–125 VAC, 200–240 VAC, and 380–420 VAC. Frequency is 50/60 Hz, speed is 2500/2800 RPM, airflow is 192/233 CFM or 113/137 CFM (depending on voltage), and noise is 46/53 dBA. Suitable for cooling industrial equipment, ventilating enclosures, and other applications.

DCS15050 Series Axial Fans
The DCS15050 Series is an AC axial fan measuring 150 × 150 × 50 mm and powered by a shaded-pole induction motor. It is available in several voltage options: 100–125 VAC, 200–240 VAC, and 380–420 VAC, at 50/60 Hz. Bearing options include sleeve bearings (S) and dual ball bearings (B). Speed grades include high speed (H, 2500/2800 RPM) and standard speed (M, 2000/2500 RPM). Airflow ranges from 53 to 59 CFM, with noise levels of 53 to 59 dBA. Power consumption is 36–40 W for high-speed models and 28–36 W for standard models. The operating temperature range is −10°C to +85°C. Suitable for industrial cooling, ventilation equipment, and more.

DCS17238 Series Axial Fan
The DCS17238 series AC axial fan measures 172 × 150 × 38 mm and features a PBT + 30% GF impeller and an aluminum alloy frame. It uses a shaded-pole induction motor and optionally comes with AWG #18 UL 1007 lead wires. It supports 100–125 VAC, 200–240 VAC, and 380–420 VAC at 50/60 Hz. Sleeve or ball bearings are available. Speed: 2,500/2,800 RPM; noise: 46/51 dBA; airflow: 300/350 CFM (180/200 m³/h). Operating temperature: −10°C to +85°C. Weight: 820 g.

DCS1725 Series AC Axial Fans
This series of AC axial fans features a 172 mm frame and a thickness of 38 mm. Sleeve (S) and ball (B) bearing options are available. The voltage range is 100–420 V (50/60 Hz), selected using voltage codes 1 (100/125 V), 2 (200/240 V), and 3 (380/420 V). Speed options are H (high speed: 2500/2800 RPM) and M (medium speed: 2000/2600 RPM), with corresponding power ratings of 28–40 W, current ratings of 0.11–0.40 A, noise levels of 49–59 dBA, and airflow of 322–356 CFM. Suitable for industrial ventilation, cooling, and other applications.

DCS18060 Series AC Axial Fan
The DCS18060 Series AC axial fans are manufactured by Shenzhen Dongchaosheng Technology Co., Ltd. and measure 180 x 180 x 60 mm. They feature shaded-pole induction motors, PBT+30%GF impellers, and aluminum alloy frames. The optional lead wire is AWG#18 UL 1015, and the terminals are 0.5 mm. The operating temperature range is -10°C to +85°C, and the weight is 950 g. The series includes three models: DCS18060B1H (100/125 VAC), DCS18060B2H (200/240 VAC), and DCS18060B1Z (380/420 VAC), all with ball bearings. At 50/60 Hz, speed is 2500/2700 RPM, power is 55/60 W, noise is 60/65 dBA, airflow is 560/660 CFM, and static pressure is 330/390 mmH2O. These fans are suitable for industrial ventilation, equipment cooling, and other applications.

DCS4020 Series Blower
The DCS4020 Series is a DC blower measuring 40 × 40 × 20 mm. It is available in three rated voltages—5 V, 12 V, and 24 V—with multiple speed options for each voltage (3000/4200/6500 RPM). These models deliver varying airflow (2.20–3.50 CFM), air pressure (3.00–8.34 mmH2O), and noise levels (21.4–34.3 dB-A). Current ranges from 0.04 to 0.26 A. The blower features a plastic impeller and frame (UL94V-0), and is available with sleeve or ball bearings. It is suitable for applications such as cooling electronic equipment.

DCS5015 DC Blower
The DCS5015 is a 50 × 50 × 15 mm DC blower designed for cooling electronic equipment. It features a plastic impeller and frame with a UL94 V-0 flame-retardant rating, and is available with either sleeve or ball bearings. It supports rated voltages of 5 V, 12 V, and 24 V, with a wide operating voltage range (3.6–6.8 V at 5 V, 6.0–13.5 V at 12 V, and 18–26.5 V at 24 V). Depending on the voltage and speed configuration, current ranges from 0.05 to 0.37 A, input power from 0.8 to 3.6 W, speed from 4,300 to 6,500 RPM, airflow from 2.87 to 3.67 CFM, air pressure from 10.2 to 23.9 mmH₂O, and noise from 35.1 to 44.8 dB-A. It weighs approximately 26.7 g. The red wire is positive and the black wire is negative. This general-purpose DC blower is suitable for a wide range of cooling applications in confined spaces where high air pressure is required.

DCS7010 Series Axial Fans
The DCS7010 is a 70 × 70 × 10 mm DC axial fan designed for cooling electronic equipment. It features a sleeve bearing and a plastic impeller and frame (UL94V-0), meeting flame-retardancy requirements. The fan weighs approximately 27.8 g and is available in three rated voltages: 5 V, 12 V, and 24 V. The corresponding operating voltage ranges are 3.6–6.8 V, 6.0–13.5 V, and 18–26.5 V. Speed options include 2000 RPM, 2500 RPM, and 3000 RPM, with airflow of 0.29–0.52 m³/min, static pressure of 0.9–2.07 mmH₂O, and noise levels of 23.4–30.9 dB-A. This series is widely used to cool compact equipment, instruments, and communications devices.

DCS7525 Series DC Fans
The DCS7525 series comprises 75 mm × 75 mm × 25 mm DC brushless cooling fans featuring high-performance ball bearings for long service life, low noise, and high airflow. Available in multiple rated voltages (5 V, 12 V, and 24 V) and speed options, the series meets a wide range of cooling requirements. Typical applications include communications equipment, power supplies, computers, and industrial control cabinets. Specifications: voltage 5–24 V, current 0.09–0.45 A, speed 3,000–4,000 RPM, airflow 0.16–0.22 m³/min, and air pressure 11.60–24.50 mmH₂O. The DCS7530 model (75 × 75 × 30 mm) is also available in 12 V, 24 V, and 48 V versions and provides higher airflow.