product — Page 20

DCS7530 Series Axial Fans

DCS7530 Series Axial Fans

The DCS7530 is a 75 × 75 × 30 mm DC axial cooling fan featuring a brushless motor for low noise and long service life. It supports rated voltages of 12 V, 24 V, and 48 V, delivering airflow of 0.18–0.36 m³/min and air pressure of 5.04–16.28 mmH₂O at speeds ranging from 2,000 to 3,700 RPM. Suitable for cooling electronic equipment, ventilating cabinets, and other applications.

DCS8010 Series Axial Fans

DCS8010 Series Axial Fans

The DCS8010 is an 80 × 80 × 10 mm DC axial fan available with either a sleeve bearing or a ball bearing. Its impeller and frame are made of plastic (U194V-0), and it weighs 38.3 g. It supports 5 V, 12 V, and 24 V, with speeds of 2,500, 3,000, or 3,300 RPM. The corresponding airflow range is 0.51–0.67 m³/min, the static pressure range is 1.29–2.4 mmH₂O, and the noise range is 26.4–32.4 dB-A. Suitable for cooling electronic equipment, telecommunications cabinets, variable-frequency drives, and other applications.

DCS8025 Series DC Axial Fans

DCS8025 Series DC Axial Fans

The DCS8025 series comprises 80 × 80 mm square DC axial fans available in 25 mm and 38 mm thicknesses. They feature sleeve or ball bearings and plastic impellers and frames (UL 94 V-0 flame-retardant rating). Multiple rated voltages are available, including 5 V, 12 V, 24 V, and 48 V, with a wide operating voltage range. Speeds range from 2,500 to 7,500 RPM, airflow reaches 0.82–2.61 m³/min, static pressure is 0.11–1.12 inH₂O, and noise levels are 28.3–59.8 dB-A. These fans are suitable for cooling electronic equipment, telecommunications equipment, power supplies, and other applications.

DCS8038 Series Axial Fans

DCS8038 Series Axial Fans

The DCS8038 Series comprises 80 × 80 × 38 mm axial fans in AC and DC versions. The AC version features a shaded-pole induction motor, a black flame-retardant PBT impeller (UL94-V0), an aluminum-alloy frame, and AWG #22 UL1007 lead wires. It operates from -10°C to +85°C and weighs 275 g. Sleeve (S) or ball (B) bearings are available. The DC version has a plastic frame and impeller (UL94 V-0), weighs 177.6 g, and is available with sleeve or ball bearings and a choice of 12 V or 24 V. Multiple speed and airflow options are offered. These fans are suitable for cooling electronic equipment, industrial ventilation, and other applications.

DCS9225 Series AC Axial Fans

DCS9225 Series AC Axial Fans

This series of 92 × 92 × 25 mm AC axial fans is manufactured by Shenzhen Dongchaosheng Technology Co., Ltd. It features PBT plastic blades, an aluminum alloy frame, and a shaded-pole induction motor. Operating temperature range: -10°C to +85°C; weight: 268 g. It supports a range of voltages (100–420 VAC) and frequencies (50/60 Hz), and offers low noise and high efficiency. Applications include cooling electronic equipment, air conditioning systems, and automation equipment. The model suffix S:H indicates an oil-impregnated bearing and a specific configuration. Different voltage options are available to suit your needs.

DKA1-DKWL Expansion Sleeve-Type Single/Double Diaphragm Coupling

DKA1-DKWL Expansion Sleeve-Type Single/Double Diaphragm Coupling

The DKA1-DKWL expansion sleeve-type single/double diaphragm coupling is made of No. 45 steel with a blackened surface finish. Its wide allowable eccentricity range makes it adaptable to a variety of drive systems. It can be installed and removed quickly, with excellent repeatability. It requires no lubrication and operates without noise or wear. With no sliding-friction transmission components, it helps reduce energy loss. Its simple, lightweight design requires no maintenance, and faults can be checked with minimal downtime. It adapts well to different environments and can operate at high temperatures. It offers high transmission accuracy, reliability, and a long service life. Suitable for applications requiring precise alignment and compensation for angular misalignment, it is widely used in automation equipment, precision machinery, and other fields.

DL-EAT1 Series Power Line Filters

DL-EAT1 Series Power Line Filters

The DL-EAT1 Series power line filters provide excellent attenuation at low frequencies and effectively suppress both common-mode and differential-mode interference. They also feature low leakage current, making them suitable for high-performance power filtering in data processing systems, telecommunications systems, medical equipment, and industrial control devices. The series is available in several ratings, including 5 A, 10 A, 20 A, 25 A, and 35 A. All models have a ground capacitance of 47 nF and a discharge resistor of 440 kΩ, and use input terminals. Dimensions vary by model. See the corresponding figure numbers in the catalog for circuit diagrams and outline dimensions. These filters meet the needs of electronic equipment requiring a highly clean power supply.

DL-EBK6 Series

DL-EBK6 Series

The DL-EBK6 Series is a product range for industrial automation, comprising 19 models from the DL-5EBK6 to the DL-1000EBK6. This page provides comparative performance data for each model at loads ranging from 0% to 100%, along with information on how different models can be combined. The number in each model designation indicates its size rating: the higher the number, the larger the model. The series is suitable for automation equipment that requires precise model selection and configuration.

DL-EBT1 Series Power Line Filters

DL-EBT1 Series Power Line Filters

The DL-EBT1 series power line filters are designed for high-performance power filtering in environments with severe interference, such as variable-frequency drive systems. The series provides excellent attenuation in the low-frequency range, effectively suppressing both common-mode and differential-mode interference while maintaining low leakage current. Rated voltage is 440/250 VAC, operating frequency is 50/60 Hz, and rated currents range from 5 A to 80 A across eight models. The filters meet dielectric withstand test requirements including 1500 VDC (line/fine), and have a climate category of 40/85/21. All models feature input terminals. Ground capacitance is available in two options, 47 nF and 100 nF, and the discharge resistance is 220 kΩ. Models include DL-5EBT1, DL-10EBT1, DL-20EBT1, DL-25EBT1, DL-35EBT1, DL-50EBT1, DL-65EBT1, and DL-80EBT1.

DL20080 Series EMI Filters

DL20080 Series EMI Filters

The DL20080 Series consists of two-stage EMI power filters offering exceptionally high differential-mode attenuation and excellent common-mode and low-frequency attenuation. Rated currents range from 1 A to 16 A (at 40°C), with a rated voltage of 250 VAC and an operating frequency of 50/60 Hz; the filters are also suitable for DC and frequencies up to 400 Hz. Maximum leakage current is 0.66 mA at 250 VAC/50 Hz. The series is available in standard, medical (N-type), and safety (S-type) versions. Input/output connection codes include 06 (6.3 × 0.8 quick-connect terminals), 08 (M4 threaded), and 24 (M6 threaded). The products are CE and RoHS certified and comply with UL 1283 and EN 60939. With an operating temperature range of −25°C to +100°C, they are widely used in power electronics, household appliances, industrial control, building automation, medical equipment, and office automation.

DL20080 Series EMC Filters

DL20080 Series EMC Filters

The DL20080 Series EMC filters are suitable for applications including power electronics, consumer electronics, household appliances, building automation, industrial applications, machinery, medical equipment, office automation, and data communications. They have a rated current of 1 to 30 A and an operating voltage of 250 VAC at 50/60 Hz, with high differential-mode and common-mode attenuation. Safety (S-type) and medical (N-type) versions are available to meet different application requirements. The products comply with RoHS and CE requirements and conform to UL 1283 and EN 60939 standards. The operating temperature range is -25°C to +100°C, and they support frequencies from DC to 400 Hz. The withstand voltage is 1100 VDC (2 s) from L to N and 2250 VDC (2 s) from L/N to PE. They are suitable for a wide range of noisy environments that require effective filtering.

DL20090 Series Filters

DL20090 Series Filters

The DL20090 series comprises AC power line filters designed to suppress electromagnetic interference (EMI). The selection table lists a range of rated currents from 1 A to 20 A, with a separate table also covering the 30 A model. Leakage current ranges from approximately 0.45 mA to 0.93 mA (per IEC 60939-2010). Input/output connections include 6.3 × 0.8 mm quick-connect terminals (code 06), M4 bolts (code 08), and M6 bolts (code 24). Depending on the model, product weight ranges from approximately 95 g to 530 g. Filter attenuation is measured in a 50 Ω/50 Ω test system in accordance with CISPR 17, with common-mode (CM) and differential-mode (DM) attenuation shown separately. Attenuation curves are provided for four current ranges: 1–4 A, 6–10 A, 12–20 A, and 30 A. The series is suitable for power lines at a range of current ratings and helps reduce conducted noise interference.

DPC21 Set-Screw Coupling, DPC31 Screw-Clamp Coupling

DPC21 Set-Screw Coupling, DPC31 Screw-Clamp Coupling

The DPC21 is a set-screw coupling, while the DPC31 is a screw-clamp coupling. This series is made of stainless steel with a polished finish and uses cylindrical screws as fasteners. Features include high rigidity, making it suitable for servo motors; zero backlash; identical performance in clockwise and counterclockwise rotation; and compensation for radial, angular, and axial misalignment. The allowable values for eccentricity, angular misalignment, and axial displacement apply individually, so the allowable values are reduced when multiple types of misalignment occur simultaneously.

DPC31 Screw-Clamp Type

DPC31 Screw-Clamp Type

The DPC31 series features screw-clamp couplings made of polished stainless steel and fitted with socket head cap screws. They offer high rigidity and are suitable for servo motors, with zero backlash and identical performance in clockwise and counterclockwise rotation. They compensate for radial, angular, and axial misalignment. Since the allowable values for eccentricity, angular misalignment, and axial displacement are specified separately, the allowable values are reduced when multiple types of misalignment occur simultaneously.

DS25 Series Low-Noise Cable Carrier (Openable on Both Sides)

DS25 Series Low-Noise Cable Carrier (Openable on Both Sides)

The DS25 series low-noise cable carrier opens on both sides, allowing cables, pneumatic hoses and hydraulic hoses to be inserted or replaced directly from the side without stopping the machine. It is particularly suitable for protecting moving cables and hoses on machine tools, automated production lines, robots and CNC equipment. Optimized link contact surfaces and stops reduce operating noise, making it suitable for high-speed, long-travel reciprocating motion. The catalog specifies dimensions including inner height B, inner width F, outer height C, outer width E, bend radius R, weight Kg/m, number of links N and pitch P. The inner height is 45 mm, with inner widths from 50~200 mm; the outer width increases with the inner width. Bend radii include R75/R100/R125/R150, allowing selection based on available equipment space and the number of cables and hoses. Similar sizes such as DS35 and alternative models such as JY55 are also available.

DS35 Series Quiet Cable Carrier (Openable on Both Sides)

DS35 Series Quiet Cable Carrier (Openable on Both Sides)

The DS35 Series quiet cable carrier (openable on both sides) features engineering plastic links and is designed to support and protect cables, pneumatic lines, and hydraulic hoses in machine tools, automation equipment, robots, and new energy equipment. The catalog lists an inner height of 45 mm and inner widths of 50, 62, 70, 75, 80, 125, 150, 175, and 200 mm, with corresponding outer heights, outer widths, and weights (approximately 1.23~1.51 kg/m). The pitch is 65~115 mm. The quiet link design reduces impact noise during high-speed reciprocating motion. Links on both sides can be opened for easy cable installation, maintenance, and later additions without dismantling the entire carrier. Available bend radii are R75, R100, R125, and R150. JY-35 end connectors are provided; select connector hole spacing and mounting hole diameter from the catalog dimension table. Users can choose the carrier length according to travel distance, installation space, and cable outer diameter.

DT5 Series Timing Belts

DT5 Series Timing Belts

DT5 series industrial timing belts have model numbers consisting of the DT5- prefix followed by the length in millimeters. The number of teeth is proportional to the belt length. Designed for precision power transmission in factory automation equipment, they are available in a range of lengths, including 410 mm, 460 mm, and 590 mm, each with a corresponding tooth count. The belt is made from wear-resistant materials for smooth, reliable operation.

EBK5 Series

EBK5 Series

The EBK5 Series is a product line included in the factory automation components catalog. It is labeled “EBK5 Series” and appears on page 53. This page is a basic introduction to the series and contains only its name. It does not provide specific model codes, dimensions, performance parameters such as stroke or lead, selection-code rules, or accessory details. The subsequent specification pages for this series must be consulted to determine its full technical characteristics, including its design, mounting method, and load capacity. The information currently available is insufficient to complete specific product selection or specification fields.

EBK5 Series Three-Phase Power Line Filters

EBK5 Series Three-Phase Power Line Filters

The EBK5 series three-phase power line filters have rated current options from 5 to 160 A and are suitable for equipment that generates high levels of interference, such as variable-frequency drive systems. They feature a new terminal block for easy wiring and come with a safety cover. With low leakage current, they provide strong common-mode and differential-mode interference suppression. Electrical specifications: rated voltage 480/275 VAC; operating frequency DC to 60 Hz; dielectric strength test 1500 VDC (line-to-line) / 2250 VDC (line-to-ground); climatic category 40/085/21. Ground capacitance is 200 nF or 690 nF, depending on the current rating; discharge resistance is 0.68 MΩ. Models are designated by the current rating followed by EBK5/40; for example, 10EBK5/40 is the 10 A version.

EBK6 Series Three-Phase, Three-Wire EMI Power Line Filter

EBK6 Series Three-Phase, Three-Wire EMI Power Line Filter

The EBK6 Series is a three-phase, three-wire EMI power line filter with rated currents ranging from 5 A to 200 A. It is designed to suppress electromagnetic interference in three-phase AC-powered equipment. Compact, space-saving, and cost-effective, it effectively filters conducted interference on power lines within its rated voltage and operating frequency ranges, meeting the EMC requirements of industrial equipment, inverters, servo systems, and other applications. Key technical parameters include rated voltage, operating frequency, rated current, one-minute dielectric withstand voltage, and climatic category.

eBOX300 Series Fanless Embedded Systems

eBOX300 Series Fanless Embedded Systems

The eBOX300 Series comprises fanless, wall-mountable industrial embedded systems in three models: eBOX300-500, eBOX300-842, and eBOX300-505C. The eBOX300-500 is built on 6th-generation Intel Core i7/i5/i3 or Celeron/Pentium platforms and supports two DDR4-2133 Long-DIMM memory modules, up to 32 GB. The eBOX300-842 uses a low-power Intel Bay Trail Celeron J1900 SoC and supports up to 8 GB of DDR3L memory and a wide operating temperature range of -20°C to +80°C. Designed for 8th/9th-generation Intel Core/Celeron ULT platforms, the eBOX300-505C supports up to 64 GB of DDR4 memory and adds four PoE Gigabit Ethernet ports. The series generally features multiple COM serial ports, VGA/HDMI/DisplayPort/DVI display outputs, USB 3.0/2.0, PCIe

eBOX671 Series Embedded Industrial Computers

eBOX671 Series Embedded Industrial Computers

The eBOX671 series comprises high-performance embedded industrial computers (box PCs) designed for harsh industrial environments. The series includes three models—eBOX671B, eBOX671A, and eBOX671-521-FL—which support 13th/12th Gen, 10th Gen, and 9th Gen Intel Core/Xeon/Celeron processors, respectively. They feature dual-channel DDR5 or DDR4 memory, with a maximum capacity of 64 GB. All models support wall or DIN-rail mounting and share the same dimensions: 280 × 210 × 80.5 mm. Connectivity includes multiple HDMI/DisplayPort display outputs, Gigabit/2.5G Ethernet (with PoE up to 60 W on select models), multiple USB and serial ports (RS-232/422/485), and expansion slots such as PCIe Mini Card and M.2. The systems support a wide 9–48 VDC input range (including models with ACC ignition input) and operate across a wide temperature range of -40°C to +70°C. They are widely used in in-vehicle computing, machine vision, intelligent transportation, edge computing, and other applications. The systems are certified to CE and FCC Class

EBT1 Series Power Line Filters

EBT1 Series Power Line Filters

The EBT1 series power line filters are a range of electromagnetic interference (EMI) filters from Suzhou Precision, available in models including 5EBT1, 10EBT1, 20EBT1 and 50EBT1. The series offers excellent attenuation at low frequencies and effectively suppresses both common-mode and differential-mode interference. With high current capacity, these filters are designed for demanding applications with significant electrical noise, and are particularly suitable for EMC protection at the input of industrial equipment such as variable-frequency drive systems. Their compact filter circuit design is intended for 50/60 Hz industrial power environments, providing equipment with a stable, low-noise power supply.

EX0920 Series Explosion-Proof Coils

EX0920 Series Explosion-Proof Coils

The EX0920 series comprises coil assemblies for various explosion-proof solenoid valves, available in three models: EX0920, EX0920(A), and EX0920(B). The coils have an insulation (explosion-proof) rating of Exmb11T4 and explosion-proof certificate number CNEX17.3311X. All models use cable leads and are suitable for a range of explosion-proof solenoid valve applications. Standard voltages are AC220V and DC24V, with two power versions rated AC6VA/DC4W and AC5.8VA/DC3.8W, respectively. The coils have a cylindrical body with a lead cable; overall dimensions are shown in the diagram in millimeters. Select the A/B version to match the solenoid valve's required voltage, power, and explosion-proof rating. The coils are intended for installation on flameproof or encapsulated explosion-proof solenoid valves.

EX1620 Series Pulse Jet Controller

EX1620 Series Pulse Jet Controller

The EX1620 series pulse jet controller is the primary control device for the cleaning system of a pulse-jet baghouse dust collector. Its output signals directly control the solenoid pulse valves, using compressed air to pulse-clean the filter bags. This keeps the collector's resistance and pressure within the set range, ensuring stable system pressure and flow. The controller uses intelligent microprocessor control to adjust pulse intervals and pulse widths to suit operating conditions, sequentially cycling through the pulse valves. It consists primarily of a microprocessor, interference suppression circuit, digital display, keypad, electronic switches, and regulated power supply, providing intelligent, stable, and reliable operation. It accommodates a wide range of power supply conditions, operating normally despite large fluctuations within AC100~240V, and features multistage power conditioning. Standard voltage options are AC220V and DC24V. Its general-purpose industrial design allows installation in a control room or directly on the dust collector.

F1/F2/F3 Series Integrated Wiring Valve Manifolds

F1/F2/F3 Series Integrated Wiring Valve Manifolds

F1/F2/F3 series integrated wiring valve manifolds (also known as valve islands or solenoid valve manifolds) allow multiple solenoid valves to be mounted on a common base with centralized piping and wiring. This significantly reduces the number of tubes and wiring harnesses, saves installation space, and simplifies maintenance. Products are supplied by number of positions (stations), and overall length L varies linearly with the number of positions: the F1 model is 115mm long with 4 positions, increases by 16mm for each additional position, and reaches 243mm at the maximum of 12 positions. F2 model length is calculated as L=number of positions×K+80, where K is the solenoid valve pitch (generally the standard manifold pitch +1mm); it can be expanded to 24 positions. The F3 model is custom-developed, and manifold dimensions vary with the solenoid valve used. For example, when fitted with 4V210 solenoid valves, it is 124mm long with 4 positions, increases by 23mm for each additional position, and is 354mm long with 14 positions. A 10-position integrated wiring manifold for the SY5120 series is also available. When selecting a product, confirm the solenoid valve model, number of positions, port size, and mounting hole locations.

F2 Series Valve Manifold

F2 Series Valve Manifold

The F2 series valve manifold (solenoid valve manifold block) mounts multiple solenoid valves together with a common air supply and centralized wiring, enabling integrated piping in pneumatic control systems. The F2 is a custom-developed manifold with an overall length calculated as L = nK + 80, where n is the number of stations and K is the solenoid valve spacing (typically the standard manifold spacing plus 1mm). Common configurations have 4~14 stations and can be customized to suit the number of valves and non-standard spacing, so dimensions vary depending on the solenoid valves used. The same family also includes the F1 fixed-spacing valve manifold (for the SY5120 centralized-wiring valve manifold, 4~12 stations, overall length 115~243mm, pitch 16mm) and the F3 valve manifold (compatible with 4V210 solenoid valves, 4~14 stations, overall length 124~354mm, pitch 23mm). Key specifications include the number of stations, solenoid valve spacing K, overall length L, compatible valve type, air supply method, and wiring method.

F3 Series Valve Manifold

F3 Series Valve Manifold

The F3 series is a custom-developed pneumatic solenoid valve manifold designed to mount multiple solenoid valves together, reducing piping and wiring. The verified dimensions for use with 4V210 solenoid valves are as follows: for 4~14 valve stations, the corresponding lengths are L=124, 147, 170, 193, 216, 239, 262, 285, 308, 331, and 354 mm, increasing by approximately 23 mm per additional station. As manifold dimensions vary with the solenoid valve, confirm the valve model, number of stations, ports, and mounting method when selecting a product. F3 is a custom product and cannot be ordered as a standard stock item.

F6-PV Series DC EMI Power Filters for Photovoltaic Inverters

F6-PV Series DC EMI Power Filters for Photovoltaic Inverters

The F6-PV series comprises DC EMI power filters designed specifically for photovoltaic inverters. With rated currents from 25 A to 1700 A, they are suitable for 1200 VDC high-voltage DC networks (IT systems). Their high-voltage design meets the electromagnetic compatibility requirements of photovoltaic systems and effectively suppresses conducted interference. Key specifications include a maximum rated voltage of 1200 VDC and dielectric withstand voltages of 3600 VDC line-to-ground and 3000 VDC line-to-line, with a climatic category of 40/085/21. The series is available in a range of current ratings and form factors to meet different installation requirements. Insertion loss is tested over a frequency range of 10 kHz to 30 MHz. These filters are suitable for photovoltaic inverters and other high-voltage DC power electronic equipment.

UL-Type Tire Coupling

UL-Type Tire Coupling

The UL-type tire coupling is a highly flexible coupling made by vulcanizing and bonding a rubber element (the tire body) to metal plates. During installation, bolts connect it directly to the two coupling halves. It offers excellent flexibility, high damping, and substantial compensation capacity, effectively absorbing shock and vibration while compensating for axial misalignment. With an operating temperature range of -20 to 80°C and a torque range of 10–20,000 N·m, it is suitable for damp, dusty conditions and applications involving impact, vibration, frequent changes in direction, and frequent starts. It is easy to install, remove, and maintain, requires no lubrication, and is durable and reliable. Models UL1 through UL13 are available, covering diameters of 80–400 mm and thicknesses of 20–110 mm. They are widely used in various types of power transmission machinery.

F-Series Flexible Couplings

F-Series Flexible Couplings

F-series flexible couplings use elastic tire elements and are suitable for operating temperatures of approximately -50°C to +50°C. They offer fire resistance, antistatic properties, and enhanced heat and oil resistance. Available sizes include F40, F50, F60, F70, F110, and F120, as well as the F40-60 series. Types B, F, and H are available, with options for special bore configurations such as keyways, hexagonal bores, square bores, and splined bores. The catalog coding system identifies specific specifications, while product models are designated directly by size. When selecting a coupling, refer to parameters such as outside diameter, bore length, and bore size.

J-FLEX Rubber Gear Flexible Coupling

J-FLEX Rubber Gear Flexible Coupling

The J-FLEX rubber gear flexible coupling combines a rubber gear elastomer with metal gears. It is available with two elastomer types: Type J, featuring a black rubber gear elastomer, and Type H, featuring a red gear elastomer. The rubber gear elastomer has a hardness of 90° ± 2° and is made from durable, heat- and oil-resistant high-strength rubber, using grade 7 chlorosulfonated polyethylene (CSM) and styrene-butadiene rubber (SBR). The metal gears are made of 45# steel and finished with paint. Non-standard configurations and special materials can be custom ordered to meet specific operating requirements. Suitable for drive applications requiring shock absorption, vibration damping, and compensation for shaft misalignment.

DIC Aluminum Alloy Parallel-Line Clamping Series

DIC Aluminum Alloy Parallel-Line Clamping Series

DIC aluminum alloy parallel-line clamping couplings feature an integrated, high-strength aluminum alloy construction. Their elastic design compensates for radial, angular, and axial misalignment. The backlash-free shaft-to-hub connection is suitable for bidirectional rotation and is designed specifically for encoders and stepper motors. The couplings are secured with clamping screws and have an anodized surface finish. Available in various sizes, including DIC-12×18.5 and DIC-16×18, with custom specifications available.

DI Series

DI Series

DI Series couplings feature an integrated, high-strength aluminum alloy construction. Their flexible design compensates for radial, angular, and axial misalignment, providing a zero-backlash connection suitable for forward and reverse rotation. Designed specifically for encoders and stepper motors, they are secured with clamping screws. Models include DI-12×18.5, DI-16×18, and DI-16×23. See the product specifications for exact dimensions.

DC Series Couplings

DC Series Couplings

The DC series includes two types of couplings: aluminum-alloy spiral-cut clamp couplings and magnetic couplings. The spiral-cut clamp type features a one-piece, high-strength aluminum-alloy construction and a spring-like design that absorbs shock. Designed specifically for encoders and micro motors, it is secured with clamping screws. The magnetic coupling uses non-contact magnetic coupling to provide zero-leakage power transmission. It offers overload protection, energy efficiency, and tolerance for greater installation misalignment, making it suitable for applications with stringent leakage requirements. Both types are available in various sizes and can be custom-made to non-standard specifications.

DM Aluminum Alloy Spring-Type Set-Screw Coupling Series

DM Aluminum Alloy Spring-Type Set-Screw Coupling Series

DM-series aluminum alloy spring-type set-screw couplings feature a one-piece, high-strength aluminum alloy construction and a spring-like design. Their flexibility compensates for radial, angular, and axial misalignment while providing shock absorption. Designed specifically for encoders and miniature motors, they are secured with set screws. Available in a range of sizes with freely selectable bore combinations, H7/H8 tolerance grades, and custom specifications. Rated torque: 0.3–20 N·m; permissible eccentricity: 0.1 mm; permissible angular misalignment: 2°; permissible axial misalignment: ±0.15 mm; maximum speed: 30,000 RPM.

DIG Stainless Steel Parallel-Line Set-Screw Series

DIG Stainless Steel Parallel-Line Set-Screw Series

This series features stainless steel parallel-line set-screw couplings with an integrated design made entirely of stainless steel for excellent corrosion resistance. The backlash-free shaft-to-sleeve connection is suitable for applications involving rotation in both directions and is designed specifically for encoders and stepper motors. Fastening is by set screw or clamping screw. Custom designs and special materials are available to meet the requirements of demanding operating conditions. The standard surface finish is polished, and the included accessories are fastening screws.

DICG Stainless Steel Parallel-Line Set-Screw Series

DICG Stainless Steel Parallel-Line Set-Screw Series

DICG Stainless Steel Parallel-Line Set-Screw Series couplings feature a one-piece stainless steel construction with excellent corrosion resistance. Their zero-backlash shaft-to-hub connection is suitable for clockwise and counterclockwise operation and is specially designed for servo motors and stepper motors. Set-screw fastening ensures a secure connection. Available in four standard models, with outer diameters of 16 mm and 20 mm and lengths of 18–26 mm. The surface is polished, and fastening screws are included.

DMG Stainless Steel Helical Set-Screw Series

DMG Stainless Steel Helical Set-Screw Series

The DMG Stainless Steel Helical Set-Screw Series is a one-piece flexible coupling made of stainless steel. Its spring-like design compensates for radial, angular, and axial misalignment, making it ideal for encoders and miniature motors. It features set-screw fastening and is available in 304 or 316 stainless steel with a polished finish. Custom sizes are available, along with bore options such as keyways, hexagonal bores, square bores, and splined bores.

DCG Stainless Steel Helical Beam Set-Screw Coupling

DCG Stainless Steel Helical Beam Set-Screw Coupling

The DCG series stainless steel helical beam set-screw coupling is made from a single piece of stainless steel. Its spring-like design provides cushioning and compensates for radial, angular, and axial misalignment. Designed for encoders and miniature motors, it is secured with clamping screws. The surface is polished, and fastening screws are included. Custom sizes and bore shapes are available, including keyways (add K), hex bores (add F), square bores (add S), and spline bores (add H). Suitable for precision power transmission, it is available in a range of outer diameters and lengths, with a wide selection of bore sizes.

DPS Plastic Encoder Coupling Series

DPS Plastic Encoder Coupling Series

DPS plastic encoder couplings are made primarily of PU (polyurethane), offering excellent flexibility and elasticity as well as high resistance to torsional failure. Designed specifically for encoders, they feature set-screw fastening for easy installation. The series offers high flexibility to compensate for radial, angular, and axial misalignment, with zero backlash and consistent performance in both clockwise and counterclockwise rotation. Suitable for applications requiring high-precision transmission, such as servo motors. A commonly used model is DPS-15×22, with an outer diameter of 15 mm, a length of 22 mm, a 6 mm bore, a rated torque of 0.6 N·m, allowable eccentricity of 0.2 mm, allowable angular misalignment of 2.5°, and a maximum speed of 4,000 RPM. Custom specifications are available, including a keyway (suffix K), hex bore (suffix F), square bore (suffix S), or splined bore (suffix H).

DD Encoder Spring Series

DD Encoder Spring Series

DD encoder spring series couplings feature an aluminum alloy body and a spring steel flexible element. Their simple design offers good flexibility, low inertia, a large angular misalignment allowance, and easy installation. The spring steel element effectively compensates for radial, axial, and angular misalignment. Suitable for miniature motors and encoders, they are secured with set screws. Standard surface treatment is used by default; custom specifications and special materials are available. Models include DD-16×25, DD-16×35, and DD-26×50.

DB Aluminum Alloy Figure-Eight Encoder Coupling Series

DB Aluminum Alloy Figure-Eight Encoder Coupling Series

The DB series aluminum alloy figure-eight encoder coupling is a flexible coupling designed specifically for encoders. Its hubs are made of high-strength aluminum alloy with an anodized finish, while the elastomer is made of polyurethane that resists oil and oxidation. The series offers excellent flexibility and resists torsional breakage, effectively compensating for radial, axial, and angular misalignment. Available models include DB-15×24, DB-15×31, DB-18×28, DB-18×38, DB-25×45, and DB-25×56. The outer diameter ranges from 15 to 25 mm, and the length from 24 to 56 mm. Custom bore sizes are available to meet a variety of encoder mounting requirements. Rated torque is 0.5–1 N·m; allowable eccentricity is 1 mm, allowable angular misalignment is 2°, allowable axial misalignment is ±2.5 mm, and allowable speed is 5,000–8,000 RPM. Suitable for miniature motor and encoder drives.

DR-DRC Economical Bellows Coupling

DR-DRC Economical Bellows Coupling

The DR-DRC series is an economical bellows coupling featuring a stainless-steel bellows flexible element. Its excellent flexibility compensates for radial, angular, and axial misalignment. It performs identically in clockwise and counterclockwise rotation, ensuring constant-velocity rotation. The body is made of stainless steel or aluminum alloy and has an anodized surface for strong corrosion resistance. The bellows is laser-welded to the hubs, providing zero rotational backlash and suitability for reversing operation. Set-screw fastening. Products are available in set-screw and clamp-style versions, with accessories including hex-socket set screws or hex-socket head cap screws. The DRG subseries features polished all-stainless-steel construction, freely configurable bore combinations, and custom specifications. Suitable for precision power transmission, servo motor connections, and similar applications.

DRG Series Bellows Couplings

DRG Series Bellows Couplings

DRG series stainless steel bellows couplings feature 304/316 stainless steel bellows flexures laser-welded to the hubs for zero backlash and bidirectional operation. They effectively compensate for radial, angular, and axial misalignment. Made entirely of stainless steel, they offer excellent corrosion resistance and a polished surface finish. Common sizes have outside diameters of 16–32 mm and lengths of 27–42 mm, with rated torques of 1.2–3.7 N·m and allowable speeds of 10,000–16,000 rpm. Custom bore sizes are available to suit different shaft diameters. These couplings are widely used in precision power transmission, automation equipment, and other applications.

DRCG Stainless Steel Bellows Clamping Series

DRCG Stainless Steel Bellows Clamping Series

DRCG series stainless steel bellows clamping couplings are made entirely of 304/316 stainless steel for excellent corrosion resistance. The bellows are laser-welded to the hubs, providing zero rotational backlash and making the couplings suitable for operation in both directions. The bellows design effectively compensates for radial, angular, and axial misalignment. The clamping-screw fastening method makes installation easy. The surface is polished, and set screws are included. Custom specifications are available. Key parameters include outer diameter D, length L, and bore diameters d1 and d2.

DLK Bellows Coupling with Expansion Sleeve

DLK Bellows Coupling with Expansion Sleeve

The DLK series bellows coupling with expansion sleeve uses an expansion-sleeve connection for zero rotational backlash and easy assembly and disassembly. Its flexible bellows design effectively compensates for radial, angular, and axial misalignment, with identical rotational performance in clockwise and counterclockwise directions. The main body is made of S45C steel, and the bellows are made of stainless steel. The polished surface provides good corrosion resistance. Suitable for reversing and high-precision drive applications. Models range from DLK1-40 to DLK1-1600 in increments of 5, with different outside-diameter specifications.

SK Schmidt Parallel Coupling

SK Schmidt Parallel Coupling

The SK Schmidt parallel coupling features a compact design and exceptional capacity to accommodate large parallel misalignment. Made from high-rigidity materials, it generates no restoring force when misaligned and keeps the distance between the two shafts unchanged. It is widely used in automated equipment such as packaging machinery, paper-making machines, forming equipment, printing machinery, woodworking machinery, cutting machines, carton-folding machines, and ceramic roller machines. Select a product using the model code format SK-[Length]-[Maximum Permissible Misalignment]-[OD]-[Number of Links]. A range of standard models is available to meet different torque, speed, and misalignment requirements.