product — Page 28

P-FQ Square Shadowless Light Source
The P-FQ Series Square Shadowless Light Source illuminates from four directions with low-angle diffuse light. Its specially treated diffusing walls produce uniform illumination, and its design is lightweight. It is suitable for machine vision applications such as electronic component inspection. The light source is square, with side lengths of 48 mm, 75 mm, 96 mm, or 120 mm. Available colors include red, green, blue, white, and infrared. It operates at 24 V, with power varying by model and color. The recommended working distance is 10–100 mm. This series supports customization of length, width, uniformity, color, angle, and mounting-hole positions.

Line Light Source P-LSP
The P-LSP series is a line light source for machine vision. It emits diffuse light from the luminous surface of linear LEDs and is suitable for applications such as print inspection. Features include an integrated aluminum alloy housing for effective heat dissipation, a diffuser film for excellent light uniformity, and nut slots on the top and bottom surfaces for flexible mounting. The model designation is P-LSP-{illuminated area length}-{color}. Illuminated area lengths are available in 150 mm, 300 mm, 450 mm, 600 mm, 750 mm, 900 mm, and 1500 mm. Available colors are R (red), G (green), B (blue), W (white), UV (ultraviolet), and IR (infrared). The operating voltage is 24 V, and the recommended working distance is 10–150 mm. The light can be used with the P-HA-24W300-1T controller. The standard cable length is 485 ± 15 mm; 1 m, 2 m, and 3 m extension cables are available. RoHS compliant.

PM-CU-LSP Coaxial Line Light
The PM-CU-LSP series coaxial line light features a modular design, allowing the coaxial module to be easily detached from the line light body. Its one-piece aluminum alloy housing provides excellent heat dissipation, and a built-in diffuser improves illumination uniformity. Nut slots on the top and bottom make installation easy. The light illuminates along the camera's coaxial direction, making it suitable for applications such as surface defect inspection and positioning. Standard lengths are 150 mm, 300 mm, and 450 mm. Available colors include red, green, blue, white, UV, and IR; power varies by length and color. Custom lengths, uniformity, color, brightness, angle, and mounting hole positions are available. Recommended working distance: 10–150 mm. Compatible controller model: P-HA-24W300-1T.

Focused Line Light Source P-LSC
The P-LSC series focused line light source emits direct light from the luminous surface of linear LEDs. The light spot can be as narrow as 3 mm, with excellent directionality. A special optical film provides uniform illumination. Suitable for applications such as fingerprint, contamination, and scratch detection. Available with illuminated section lengths from 50 mm to 1000 mm and in red, green, blue, white, ultraviolet, and infrared. Length, uniformity, color, brightness, angle, and mounting hole positions can be customized. Working distance: 10–100 mm; voltage: 24 V; power varies with length.

High-Brightness Line Light Source P-LSG
The P-LSG series high-brightness line light source features a one-piece aluminum-alloy housing and a fan for excellent heat dissipation. It is equipped with imported high-power LEDs and delivers brightness of up to 1,000,000 lux, making it suitable for line illumination in machine vision inspection. Available in multiple colors, including red (R), green (G), blue (B), white (W), ultraviolet (UV), and infrared (IR). Length, uniformity, color, brightness, angle, and mounting-hole positions can be customized to meet customer requirements. Typical applications include battery coating inspection and detection of microcracks in silicon wafers. Compatible controllers: PM-A-24W24-2T or PM-C-24W200-4TS3. Optional extension cables: P-SM-L# or SMR-SMP-L#. Operating temperature: -20 to 60°C; humidity: 20–85% RH (non-condensing).

High-Brightness Coaxial Line Light PM-HCU-LSG
The PM-HCU-LSG series high-brightness coaxial line light features a modular design, allowing the coaxial module and line light unit to be easily detached. Its one-piece aluminum alloy housing and fan provide excellent heat dissipation. Imported high-power LEDs deliver brightness of up to 500,000 lux. Nut slots on the top and bottom allow flexible mounting. Suitable for applications such as high-speed in-line PCB inspection, mark-point positioning, and surface defect inspection of reflective objects. Light lengths range from 100 to 1,200 mm in 100 mm increments. Available colors are red (R), green (G), blue (B), white (W), ultraviolet (UV), and infrared (IR). Operating voltage is 48 V, and power varies with length. The standard cable length is 485 ± 15 mm; custom extension cables from 1 to 10 m are available. Recommended working distance: 10–150 mm. Compatible controller: P-AHC series. The product offers high uniformity and stability, with an expected lifespan of over 60,000 hours (red) or 30,000 hours (white).

Ultra-High-Brightness Line Light P-LSG2
The P-LSG2 series of ultra-high-brightness line lights delivers illumination of over 2 million lux. It is suitable for applications such as high-speed production-line inspection, print inspection, and surface defect detection. The light features excellent uniformity, stability, and a compact design, with multiple mounting options and a specially designed heat-dissipation structure. At the same power as the P-LSG series, it delivers over 1.6 million lux; custom configurations can exceed 2 million lux. Working distance: 10–200 mm. Voltage: 48 V. Power range: 48–518.4 W. Standard cable length: 485 ± 15 mm, with optional 1–10 m extension cables. Available wavelengths: red (620–630 nm), blue (465–475 nm), and white (color temperature 6,000–10,000 K). RoHS compliant. Expected service life: over 60,000 hours for red at 50% illuminance under continuous operation, and over 30,000 hours for white. Custom options include length, uniformity, color, brightness, and mounting-hole positions. Compatible controller: P-AHC-48W300-2TEN.

P-MAL Series Multi-Angle Line Light
The P-MAL Series is a reflective multi-angle line light. A special process creates multiple sets of mirror surfaces at different angles, focusing light at a single point to produce multi-angle reflected illumination. With brightness of up to 1,000,000 lux, it is suitable for applications such as glass surface defect inspection, mobile phone screen scratch detection, and PCB inspection. The light operates at 48 V and is available in 158 W or 264 W versions, depending on color or configuration. The recommended working distance is 10 mm. Four colors are available: red (620–630 nm), green (515–530 nm), blue (465–475 nm), and white (color temperature 6000–10000 K). The standard cable length is 485 ± 15 mm, with 1–10 m extension cables available. The compatible controller is model P-AHC-48W600-1T. The product complies with RoHS standards and is designed for ambient temperatures of 0–40°C and humidity of 20–85% RH (non-condensing). The expected lifetime is over 60,000 hours for red light (to 50% output) and over 30,000 hours for white light. Length, uniformity, color, brightness, and mounting-hole positions can be customized to meet customer requirements.

Multi-Angle Line Light P-DMAL (Direct-Irradiation Type)
The P-DMAL multi-angle line light (direct-irradiation type) combines the emitting surfaces of multiple linear LED arrays to produce direct light from multiple angles. It delivers brightness of up to 1,000,000 lux, and the angle is adjustable. Suitable for industrial machine-vision applications such as detecting surface defects in glass, scratches on phone screens, and defects on PCB substrates. Available in red (620–630 nm), green (515–530 nm), blue (465–475 nm), and white (color temperature: 6000–10000 K). The standard model, P-DMAL-300, is 300 mm long, with a recommended working distance of 20 mm, power rating of 576 W, and 48 V supply. Compatible controller: P-AHC-48W600-1T. Length, width, color, angle, brightness, and mounting-hole positions can be customized. The standard cable length is 485 ± 15 mm; 1 m, 2 m, and 3 m extension cables are available. Expected lifetime: >60,000 hours for red and >30,000 hours for white (to 50% of initial output). Operating conditions: temperature -20 to 60°C, humidity 20–85% RH. RoHS compliant.

PLDL Tunnel Light
The PLDL series tunnel light features a specially engineered semicylindrical diffusing wall that provides uniform, diffuse illumination. High-power LEDs deliver high brightness, making it suitable for applications requiring even lighting, such as keyboard silk-screen inspection. The naming format is P-PLDL-length-width-color. Length, width, color, and other parameters can be customized to meet customer requirements.

PLLD Tunnel Light Source
The PLLD series tunnel light source is a linear illumination solution for machine vision inspection. It provides uniform bar lighting and is suitable for applications such as surface defect inspection, character recognition, and dimensional measurement. The series includes six standard models, from PLLD-240-300-W to PLLD-1210-300-W. All models use a 24 V DC power supply, with power ratings ranging from 78.72 W to 432.96 W and a recommended working distance of 10–30 mm. Custom options include length, width, uniformity, color (red, blue, green, or white), brightness, and mounting hole positions. The light source complies with RoHS standards. Its red wavelength is 620–630 nm, blue is 465–475 nm, green is 515–530 nm, and white has a color temperature of 6000–10000 K. The operating environment is 0–40°C and 20–85% RH (non-condensing). Expected service life is over 60,000 hours for red and over 30,000 hours for white (50% depreciation). It uses AC19-2PL# series cables, available in lengths from 1 to 10 m, and is compatible with HAPS-24W500-1T or HAPS-24W790-1T controllers.

P-LAL Series Laser Light Source
The P-LAL series uses lasers as its light source, delivering highly directional, direct light with a spot width of up to 1 mm. Multiple laser heads illuminate the target from different angles to eliminate blind spots. It is suitable for applications such as high-speed inspection of plug-in pin leads, connector pin inspection, and connector positioning and installation. Two models are available: P-LAL-275-160 and P-LAL-200. Both operate at 3 V and have a power rating of 2.52 W, and require a 5 V/1 A power adapter.

Point Light Source P-NSPL
The P-NSPL series features uniquely designed, compact, high-brightness point light sources powered by high-power LEDs. They deliver high brightness, and their one-piece aluminum alloy housings provide excellent heat dissipation. They are compatible with leading telecentric lenses on the market, and custom sizes are also available. Applications include mark positioning, wafer inspection, chip inspection, and LCD panel inspection. The lights use constant-current drive. Base models are available in two power ratings: 0.9 W/1.3 W (P-NSPL-8-1) and 1.8 W/2.5 W (P-NSPL-8-3). The output aperture is 8 mm, the weight is 36±5 g, and the recommended working distance is 65–200 mm (base model). Available colors/wavelengths: R (red), G (green), B (blue), W (white), I (infrared), IR940 (940 nm infrared), and UV365 (365 nm ultraviolet). The infrared and ultraviolet versions can be used with coaxial telecentric lenses. The standard cable length is 485±15 mm; 1 m, 2 m, and 3 m extension cables are available. RoHS compliant. Wavelength ranges: red 620–630 nm, blue 465–475 nm, green 515–530 nm; white color temperature 6000–10000 K. Operating ambient temperature 0

SAI Series AOI Light Source
Designed for solder joint inspection on circuit boards, inspection of objects with multiple levels, and shape defect inspection of rotating parts. Uses high-brightness LEDs with a narrow emission angle for high intensity and excellent directionality. Multiple colors and angles can be controlled independently in a compact design. Custom sizes and combinations of angles and colors are available on request. Supports a range of wavelengths, including red (620–630 nm), blue (465–475 nm), green (515–530 nm), and white (6000–10000 K). Standard cable length: 485 ± 15 mm; 1, 2, and 3 m extension cables are available. RoHS compliant. Operating temperature: 0–40°C; humidity: 20–85% RH. Red light sources operate continuously for over 60,000 hours at 50% illumination (50% attenuation); white light sources operate for over 30,000 hours. Compatible with all Rsee series controllers.

Programmable Fringe Light Source P-DIST
The P-DIST series programmable fringe light source is a pattern light source for optical projection phase measurement. It supports switching between horizontal and vertical fringes, with independently adjustable fringe widths (1–255 pixels). Its high-brightness constant-current backlight prevents flicker, and brightness is adjustable across 100 levels. The image movement step can be set, and camera triggering is supported for synchronized image capture. Simple operation is provided through control via a single RS232 serial port. Available in 11-, 15-, 24-, and 32-inch sizes, with 100 W or 240 W power, AC 100–240 V input, LAN communication, and forced-air cooling. Maximum illuminance is ≥4000 lux (full white). The source supports color binary fringes and 255-grayscale-level cosine fringes. Compatible controllers are P-C-48W100-1T, P-C-48W100-1TL, and P-C-48W240-1TL. Applications include inspection of automotive aluminum parts, mobile phone back covers, and mobile phone screens.

Programmable Stripe Light Source P-DISL2
The programmable stripe light source P-DISL2 is a new type of light source capable of generating horizontal and vertical stripe patterns at high speed at the same workstation. It can project horizontal and vertical stripe patterns and adjust parameters such as stripe width, spacing, and offset, with support for freely editing stripe patterns. It supports both line-scan and area-scan modes. The maximum line-scan rate is 71,428 lines/s (internal trigger); the maximum strobe switching frequency is 1,000 Hz (internal trigger), and the maximum constant-on/off switching frequency is 500 Hz (internal trigger). It comes with an external line-laser pointer for quickly setting the angle. Communication is via a DB15 interface. Cooling is provided by forced-air fans (fans supplied by the customer), and the drive modes are strobe drive and PWM drive. The stripe grating has no dividers, and stripe patterns can be custom-edited. Operating environment: 0°C to 40°C, 20–85% RH (non-condensing); storage environment: -20°C to 60°C, 20–85% RH (non-condensing). Multiple sizes are available, with varying overall dimensions, illuminated areas, input voltages, power ratings, and other specifications.

High-Brightness Fiber Optic Light Source P-HSP
The P-HSP series is a high-brightness fiber optic light source featuring an integrated light source and control circuit. It delivers illuminance of up to 20 million lux. With low power consumption and constant-current control, it provides soft light, generates little heat, and offers excellent stability. It can directly replace halogen and xenon light sources, turning on instantly without a warm-up period. A built-in temperature sensor enables fault detection and over-temperature protection, and the service life is up to 60,000 hours. Suitable for medical lighting, semiconductor equipment, industrial lighting, and other applications. The range includes two models, P-HSP-100-W and P-HSP-300-W, with output powers of 100 W and 300 W, respectively. The fiber optic outlet has a diameter of φ15 mm (custom sizes available). Cooling is fan-based, and the drive method is constant-current.

PL-LSG Series
This series of new linear light sources is designed for PL inspection of silicon wafers and is suitable for the solar photovoltaic industry. Featuring a special heat-dissipation design, these lights offer high uniformity, excellent stability, a compact form factor, and versatile mounting options. Near-infrared-sensitive cameras capture photoluminescence images to detect defects in silicon wafers in a single inspection, including internal microcracks, concentric rings, faint prints after printing, broken grid lines, black spots, and surface dirt or scratches. The typical model, PL-LSG-350, measures 366 × 45 × 103.4 mm, with an emitting area of 350 × 17 mm. It has an input voltage of 48 V and a total power of 172 W, and uses fan-forced cooling and constant-current drive. The compatible controller is P-AHC-48W300-2T, and the extension cable is 19M6A-19M6A-L#. Operating conditions: ambient temperature 0–40°C and humidity 20–85% RH. The model designation is PL-LSG-#, where # indicates the length of the emitting area.

P-BL Series Backlight
The P-BL Series provides uniform backlighting for machine vision applications such as liquid level measurement, foreign particle inspection, screen module inspection, UV adhesive inspection, and fluorescent anti-counterfeiting code inspection. The series is available in infrared (940 nm) and ultraviolet (365 nm) wavelengths, with high-transmittance or fluorescence-excitation properties. Products operate on 24 V, with power ratings from 1.8 W to 26 W and weights from 51 g to 800 g. The recommended working distance is 10–200 mm. Dimension drawings for each model show the standard version. The outer and inner diameters, uniformity, color, angle, brightness, and mounting hole positions can be customized to meet customer requirements.

P-SP Series Combination Light Source
The P-SP series is designed for machine vision applications and includes several types of light sources, such as collimated lights, low-angle direct lights, and diffuse panel lights. Collimated light provides highly parallel illumination, making it suitable for measuring part dimensions, extracting the edges of transparent objects, and detecting glass defects. Low-angle direct light illuminates from four sides and is suitable for pin inspection, edge extraction on square components such as ICs, and inspection of square glass surfaces. The diffuse panel light features a folded design with illumination on both sides, making it suitable for pharmaceutical inspection. Models are available in a range of sizes (including 60, 130, 180, 183, 196, and 208) and colors (W for white, B for blue) to meet different inspection needs.

P-CBL Combination Light Sources
The P-CBL series of combination light sources includes various configurations, such as coaxial light combined with infrared ring light, coaxial parallel light combined with line light, and dome light combined with flat dome dot light. They are suitable for defect detection after screen positioning, battery defect inspection, mobile phone glass inspection, PCB surface defect inspection, metal surface inspection, and more. The products are available in multiple wavelengths (infrared, red, and white) and power ratings to meet the needs of different surface inspection applications. They use LED light sources; some models operate at 24 V, with power ranging from 1.225 W to 57.648 W.

PM-A Series Analog Controllers
This series of analog controllers provides stepless adjustment of light intensity through voltage control. Each channel supports a maximum output current of 1–2.5 A and delivers precise, highly reliable trigger signals. The controllers feature a built-in universal switching power supply with an AC 100–240 V input, offering stable operation, ease of use, convenience, and a fast response. Brightness can be adjusted using the front-panel dial. Selected models (with the S2 suffix) also support remote dimming via RS232. Models range from 24 W to 1,200 W, with 2- or 4-channel outputs to meet a variety of power requirements. Trigger delay is less than 1 ms. Output ports are available in two types: SMP-03V-BC and 12M-2B. These controllers are widely used in machine vision inspection, industrial automation, and other applications.

P-HA Series High-Power Analog Controller
The P-HA series high-power analog controllers feature a built-in 100–240 VAC universal switching power supply, power-off memory, short-circuit protection, and overload protection. Light brightness can be controlled from the front panel or via RS-232 serial communication. An external trigger port lets you switch the light on only when needed, extending its service life. The controllers use constant-voltage drive and offer 256-step dimming via front-panel buttons, with manual and RS-232 control. Two models are available: the single-channel P-HA-24W300-1T, with a maximum output of 300 W, and the dual-channel P-HA-24W600-2T, with a maximum output of 600 W. Input: AC 100–240 V, 50/60 Hz. Output: DC 24 V at 12.5 A. Trigger delay: ≤5 ms. External trigger voltage: DC 5–24 V. Overcurrent protection activates at more than 110% of the rated current and resets automatically. Operating temperature: 0–40°C; humidity: 20–85% RH. Forced-air cooling. RoHS compliant. Suitable for controlling industrial light sources in machine vision and other applications.

PM-D Series Digital Controller
The PM-D Series Digital Controller is a digital LED light source controller that supports both constant and strobe illumination. It uses constant-voltage drive and offers two dimming methods: panel buttons and RS232 serial communication, with 256 levels of fine brightness adjustment. Available in 2-, 4-, and 6-channel configurations, it covers total power ratings from 24 W to 200 W, with a maximum current of 3 A per channel. The external trigger features high-speed optocoupler isolation, with a trigger delay of less than 10 μs to ensure accurate, reliable signals. It includes overcurrent, overload, and short-circuit protection, and saves settings when power is lost. Compact and easy to operate, it is ideal for controlling LED light sources in machine vision, industrial inspection, and other applications.

P-MDPS Series Mini Digital Controller
This series of mini digital controllers controls the brightness of LED light sources and supports two control methods: manual buttons and RS232 serial communication. It provides four output channels, with a maximum output current of 3 A per channel and a total output power of 75 W. Three operating modes are supported: continuous, trigger, and strobe. Features include power-off memory and short-circuit protection. The external trigger voltage range is DC 5–24 V. Trigger delay is less than 8 μs in strobe mode and less than 25 μs in digital mode. The input and output voltages are both DC 24 V. The operating temperature range is 0–40°C, and the humidity range is 20–85% RH (non-condensing). A power adapter (BYX-2404000) is available as an option. Suitable for lighting control in machine vision, industrial inspection, and other applications.

PM-D-TE Series
The PM-D-TE Series is a plastic-housed Ethernet digital controller designed for machine vision lighting. It supports 4-, 6-, and 8-channel output, with power ratings of 60 W, 120 W, and 200 W. Features include power-loss memory, overload protection, and short-circuit protection. Brightness can be controlled in three ways: manual buttons, Ethernet communication, or the RS232 serial port. The external trigger uses high-speed optocoupler isolation and supports PNP/NPN triggering, with a trigger delay of less than 20 μs. The input voltage is AC 100–240 V, the output voltage is 24 V, and the maximum current per channel is 3 A. Suitable for applications such as automated inspection and vision positioning.

PM-C Series
The PM-C Series digital-display constant-current controllers are designed specifically for machine-vision LED light sources. They provide two or four 5 V output channels, with a maximum current of 0.7 A per channel. Manual settings and RS232 serial communication enable 256-level brightness adjustment. External triggering uses high-speed optocoupler isolation for reliable response, with trigger delays as low as ≤150 µs (2-channel models) or ≤20 µs (4-channel models). The wide input-voltage range is 100–240 VAC. Constant-current drive ensures stable light-source brightness. Suitable for a range of industrial vision inspection applications, including positioning, measurement, and identification.

P-AHC Series High-Power Constant-Current Controller
The P-AHC series high-power constant-current controller is designed to drive and control machine-vision light sources. It provides constant-current drive and supports 256-level dimming, either manually or via the control-panel buttons. Features include automatic detection of the light source’s rated current, power-off memory, short-circuit protection, and overload protection. The external trigger port supports NPN/PNP signals, with a trigger delay of ≤150 μs. Communication options include the control-panel buttons, an RS232 serial port, and an Ethernet port. Models feature a 48 V output, power ratings from 300 W to 800 W, and 1T or 2T channels. Operating temperature: 0–40°C; humidity: 20–85% RH (non-condensing). The controller uses forced-air cooling and complies with RoHS standards.

PM-S Series
The PM-S Series strobe controller is designed to drive machine vision lighting. Features include an adjustable illumination pulse width of 000–200 us or 000–999 us; increases peak light output by over 400% and extends the light’s service life; provides a camera trigger port for precise image-capture synchronization; supports external and internal trigger modes (debug mode); and includes protection against output overloads and short circuits. Rated output voltage: 48 V. Maximum output power: 200 W. Available in 2-channel and 4-channel models.

PM-SF Series Flying-Capture Strobe Controller
The PM-SF Series flying-capture strobe controller is a light source controller designed for flying-capture machine vision applications. It features an adjustable illumination pulse width of 0–200 μs, boosting the light source’s instantaneous brightness by over 400% while effectively extending its service life. The controller supports both external and internal trigger modes and provides a camera trigger port to ensure synchronized image capture. It also includes protection against output overloads and short circuits. The product operates on an input voltage of 100–240 VAC and provides a regulated 48 V output, with a maximum peak current of 50 A and a power rating of 200 W. It supports RS232 and Ethernet communications and has a 12M-2B output port. The external trigger response delay is ≤5 μs, and the internal trigger period is 10–999 ms. It is suitable for a wide range of high-speed imaging and inspection applications.

P-SD Series Strobe Controller
The P-SD Series is a dedicated line-light strobe controller that can drive six 48 V light sources and provides strobe illumination times of 1–50 μs. It supports control via the front panel and Ethernet, and provides one external line-trigger synchronization signal, one frame-trigger output, and three camera-synchronization trigger outputs. Its trigger circuits use high-speed optocoupler isolation to deliver accurate, highly reliable trigger signals. Automatic overload and overtemperature protection is included, and the line-trigger frequency is below 100 kHz. Two input power specifications are available: 100–240 VAC and 180–240 VAC, with output power ratings of 1,000 W and 2,400 W, respectively. Output voltage is 48 V, and maximum total output current is 25 A (maximum 25 A per channel). The output connector is 16M-2B (1+2-). Remote control is via Ethernet. The external trigger interface is EDG3.81, the frame-trigger voltage is D5V–24V, and both the line-trigger and camera-trigger interfaces are RS-422. For indoor use only. Operating temperature: 0–40°C; humidity: 20–85% RH (non-condensing).

MER-G-P Series
The MER-G-P Series is a high-performance industrial area-scan camera line from Hikrobot Technologies Co., Ltd. Featuring CCD or CMOS sensors, it offers resolutions from 300,000 to 20 million pixels and frame rates from 5 to 300 fps. Color, monochrome, and near-infrared (NIR) versions are available. The cameras come in a range of sensor formats (1/4 inch to 1 inch) and pixel sizes (1.4 μm to 7.4 μm). They are designed for applications such as positioning and guidance, dimensional measurement, and identification in 3C manufacturing, metalworking, and industrial automation, and meet the demands of harsh industrial environments.

CE Series Industrial Area Scan Cameras
The CE Series is a range of high-performance industrial area scan cameras from Hikrobot. It offers GigE and USB 3.0 interfaces and uses CMOS or CCD sensors. Resolutions range from 1280×960 to 5472×3648, with frame rates of up to 148 fps. Sensor formats range from 1/3 inch to 1 inch, and pixel sizes from 2.2 μm to 4.0 μm. These cameras are designed for machine vision applications such as positioning and guidance, dimensional measurement, and identification. They are stable, reliable, and easy to integrate, making them suitable for a wide range of applications in 3C electronics, metalworking, industrial automation, and other fields.

CA Series GigE Industrial Area Scan Cameras
The CA Series from Hikvision offers cost-effective industrial area scan cameras with a GigE interface. Resolutions range from 640 × 480 to 720 × 540, with frame rates of up to 320 fps. These cameras feature CMOS sensors, pixel sizes of 4.8 μm or 6.9 μm, and optical formats of 1/4" or 1/2.9". Monochrome and color models are available, making them suitable for automated applications such as visual inspection, positioning, and measurement.

CH Series Industrial Area Scan Cameras
The CH Series is a range of high-performance industrial area scan cameras from Hikrobot, available with GigE and USB 3.0 interfaces. Featuring CCD or CMOS sensors, the cameras offer sensor sizes from 1/4 inch to 36 mm × 24 mm, pixel sizes of 3.2 μm–5.5 μm, resolutions from 640 × 480 to 6576 × 4384, and frame rates of up to 320 fps. Monochrome and color options are available for machine vision, automated inspection, scientific imaging, and other applications.

Hikvision MF Series
The Hikvision MF Series comprises 8-megapixel industrial fixed-focal-length lenses for 2/3-inch sensors, with focal lengths ranging from 8 mm to 50 mm. Their ultra-high-resolution design delivers consistent image sharpness, low distortion, and excellent relative illumination. The achromatic design enhances image quality with color cameras, while outstanding vibration resistance keeps optical-axis shift within a pixel. Excellent stability across high and low temperatures makes these lenses suitable for demanding environments. They also offer excellent macro performance and optical quality at close range. Key specifications include an aperture range of F2.8–F16, distortion below 0.33%, a minimum working distance of 0.1–0.4 m, a C-mount interface, and an operating temperature range of −10 to 50°C. The lenses support filter threads (M27 × 0.5 or M30.5 × 0.5 on some models) and are widely used in machine vision, industrial inspection, and other applications.

SMT Series Conveyor Belts
The SMT series of conveyor belts is available in a range of cover materials (U, PA) and color combinations. Options include thicknesses from 0.33 mm to 1.5 mm, minimum pulley diameters from 6 mm to 30 mm, tensile strength (FW values from 0.16 to 8 N/mm), and friction coefficients. Operating temperatures range from -40°C to 100°C, making these belts suitable for automated conveying in light industry, electronics, logistics, and other applications.

KF-E Series
Hikvision's KF-E Series features high-resolution 12 MP fixed-focal-length lenses for 1.1-inch sensors. With focal lengths from 6 mm to 50 mm and an aperture range of F1.8–F22, these lenses offer low distortion, high relative illumination, and stable performance across a wide temperature range. They are ideal for demanding applications such as machine vision inspection and industrial automation. Featuring a C-mount and supporting various filter thread sizes, they operate reliably at temperatures from -10 to 50°C.

MVL-HT Telecentric Lens Series
This series of object-side telecentric lenses delivers high resolution, high contrast, high peripheral illumination, and ultra-low distortion (≤0.2%), making it suitable for precision measurement and positioning. The lenses cover 1/2-inch and 2/3-inch image formats and feature a standard C-mount. Multiple magnification options (0.5×, 0.65×, 0.7×, 1×, and 2×) are available with working distances of 65 mm, 110 mm, or 150 mm. Depth of field ranges from 0.32 to 3.01 mm, resolution from 5.37 to 12.61 μm, telecentricity is ≤0.1°, and the aperture range is 9.4–16. Select models support an optional coaxial light interface for easy integration of illumination. Their compact size makes them compatible with a wide range of industrial cameras.

P-LPL Polarizer Series
The P-LPL series of linear polarizers from Hikrobot helps eliminate reflections and glare from object surfaces in machine vision systems, improving image contrast. The series is available in seven common thread sizes, from M22.5 to M40.5, to fit lenses with different diameters. Made with high-quality optical glass and polarizing film, the polarizers provide high transmittance and polarization efficiency. The standard C-mount design makes installation easy. Suitable for inspecting highly reflective surfaces, glass, plastics, and more.

P-BP Series Filters
The P-BP Series comprises bandpass filters for Hikrobot machine vision systems, with a range of center wavelengths covering ultraviolet, blue, green, orange, red, and infrared (365 nm, 470 nm, 525 nm, 590 nm, 660 nm, 850 nm, and 940 nm). The filters use standard C-mount thread sizes (M22.5*P0.5 to M40.5*P0.5) and are suitable for applications such as spectral selection, fluorescence imaging, and multispectral inspection in machine vision systems. Featuring high transmittance and narrowband filtering, they effectively suppress stray light and improve image contrast. All models in the series feature threaded mounting, a compact design, and compatibility with mainstream industrial cameras and lenses.

Gigabit with PoE
This series of Gigabit Ethernet network cards with PoE features a PCI Express v2.1 x4 interface and supports auto-negotiation at 10/100/1000 Mbps. Each port delivers up to 30 W of PoE power and complies with IEEE 802.3af and IEEE 802.3at standards. The cards automatically detect powered devices and provide power according to the appropriate PoE class. Thick, gold-plated RJ45 connectors ensure more reliable connections and are designed for industrial-grade cabling. Half-height and full-height configurations are available, with 1-, 2-, and 4-port models to choose from.

Standard Gigabit
The P-GNA Series Standard Gigabit Ethernet NICs are available with 1, 2, or 4 RJ45 ports and support auto-negotiation at 10/100/1000 Mbps. They use a PCI Express v2.1 x1 interface. Each port supports 8 transmit and 8 receive queues, with 32 virtual ports for I/O virtualization and QoS, and complies with the PCI-SIG SR-IOV Rev. 1.1 specification. Reinforced RJ45 connectors ensure reliable connections. The compact, integrated design supports both half-height and full-height configurations, making these NICs suitable for industrial automation, data acquisition, and other applications.

MXL Timing Belt Pulleys
MXL high-speed, low-torque timing belt pulleys feature ISO-standard tooth dimensions and are suitable for precision drive systems. Available in aluminum alloy (clear anodized or untreated) or 45C steel (black oxide, electroless nickel-plated, or untreated). Pulley codes include BLA, BLH, BSY, BSP, and BSM. Models are specified by parameters such as pulley code, number of teeth, tooth profile, nominal width, pulley shape, and bore specifications. A wide range of tooth counts is available to meet various transmission ratio requirements.

XL Timing Pulley
XL timing pulleys have an imperial tooth profile with a pitch of 1/5 inch (5.08 mm), making them suitable for high-speed, low-torque transmission. Designed to ISO standard tooth dimensions, they are available in a range of materials and finishes: aluminum alloy (clear anodized or untreated) and S45C steel (black oxide, electroless nickel plated, or untreated). Pulley codes indicate the material and finish: BLA (clear-anodized aluminum alloy), BLH (untreated aluminum alloy), BSY (black-oxide S45C), BSP (electroless-nickel-plated S45C), and BSM (untreated S45C). These pulleys are suitable for light-duty drives in applications such as automation equipment and conveyor systems.

B-MXL Series MXL
The B-MXL series consists of MXL toothed timing belts with an imperial pitch of 2.032 mm, designed for precision synchronous transmission. Model numbers consist of a B followed by the tooth count and the MXL suffix. Tooth counts range from 40 to 424, corresponding to pitch lengths from 81.280 mm to 861.568 mm. These belts are widely used in office equipment, instrumentation, and light-duty drives. This list includes standard lengths, which can be selected directly by model number.

L-Type Timing Pulleys
L-type high-speed, low-torque timing pulleys feature ISO-standard tooth dimensions and are suitable for high-speed, low-torque transmission applications. Pulley materials are available in aluminum alloy (clear anodized) or 45C steel (black oxide finish). Standard belt widths include 050 (12.7 mm), 075 (19.1 mm), 100 (25.4 mm), and 150 (38.1 mm). Pulley dimensions (A, W, L, and Lm) vary by width. Bore configurations include H (round bore), P (round bore with tapped hole), and N (new JIS keyway with tapped hole); tapped-hole sizes can also be customized. These pulleys are widely used in automation equipment and conveying machinery, and custom designs are available to meet customer requirements.

H-Type Timing Pulleys
High-speed, low-torque H-type pulleys feature an ISO-standard tooth profile and are compatible with H-type timing belts. Available in aluminum alloy (natural anodized finish) or 45C steel (black oxide or electroless nickel plating). Standard belt widths include 075 (19 mm), 150 (38.1 mm), and 200 (50.8 mm). Pulley codes include BLA, BLH, BSY, and BSM, representing different materials and finishes. Choose from a range of tooth counts, pulley shapes, and bore shapes (H, P, N, etc.) to suit a variety of drive requirements.