product — Page 69

AKH Series Quick-Connect Fittings
The AKH series consists of pneumatic fittings with quick-connect connections on both ends and a built-in check valve to prevent reverse airflow. They are suitable for vacuum systems (vacuum level below -100kPa). The compact body is easy to install and accommodates tubing with an outer diameter of Φ4~Φ12mm. Specifications shared with the AKB series: working fluid: air; operating pressure range: 100kPa~1MPa; cracking pressure: 0.005MPa; fluid and ambient temperature: -5~60℃ (no freezing); compatible tubing materials: nylon, soft nylon and polyurethane. Available models include AKH04-00, AKH06-00, AKH08-00, AKH10-00 and AKH12-00, with body diameters of ΦD 9.3~21.7mm and lengths of 33.5~70.2mm. Release rings are available in gray, blue or black; plastic bodies are available in gray or black.

AKB Series Quick-Connect Fittings
The AKB series comprises quick-connect fittings with built-in check valves that prevent reverse airflow in pneumatic lines. They are suitable for vacuum systems (vacuum level of -100kPa or below). Their quick-connect design is compact and easy to install, and accommodates tubing with an outside diameter of Φ4~Φ12mm. Specifications shared with the AKH series: operating fluid: air; operating pressure range: 100kPa~1MPa; cracking pressure: 0.005MPa; fluid and ambient temperature: -5~60℃ (no freezing); compatible tubing materials: nylon, soft nylon, and polyurethane. AKB fittings have a male thread on one side and a quick-connect fitting or female thread on the other, allowing direct connection to threaded ports.

KCH Series Equal-Diameter Straight Fittings
The KCH series consists of pneumatic push-in equal-diameter straight fittings for connecting nylon and PU tubing in a straight line. Compatible tube outer diameters are Φ4, Φ6, Φ8, Φ10 and Φ12 mm, with thread sizes M5×0.8, 1/8″, 1/4″, 3/8″ and 1/2″. The body is made primarily of steel with a super-hard surface treatment and does not release copper ions. The maximum operating pressure is 1.0 MPa, and standard compression sealant is used. Air outflow from the fitting is suppressed when the hose is disconnected. KC series products must be used with KCR tube fittings. Select a model based on the applicable tube outer diameter, thread size, hex width across flats H, length L and dimension M.

BK Series Support Units
The BK series comprises fixed-side support units for ball screws, featuring J-type bearing end-face configurations (J1/J2/J3) and accommodating different screw diameters (14–55 mm). A range of sizes from BK10 to BK40 is available, with mounting dimensions conforming to the JIS B 1192-1997 standard. These support units offer high rigidity and stability and can be used in combination with FF, EF, and other types to meet different transmission requirements. Key parameters include bearing section diameter, mounting length, and thread specifications, supporting compatibility with a range of screw diameters.

KCL Series Elbow Fittings
The KCL series consists of pneumatic push-in elbow fittings for φ4~φ10 mm nylon and PU tubing, with a maximum operating pressure of 1.0MPa. The fittings are made of steel with an ultra-hard surface treatment and do not release copper ions. They stop air from escaping through the fitting when the tubing is disconnected. Models are identified by “KCL + applicable tube outer diameter + thread size.” Thread sizes include M5×0.8, 1/8", 1/4", and 3/8"; hex width H, length L, and dimension M vary by specification. KC series products are recommended for use with KCR tube fittings.

KC Series Push-to-Connect Pneumatic Fittings
The KC series consists of push-to-connect fittings for pneumatic lines, including KCH equal-diameter straight fittings and KCL 90-degree elbow fittings. They must be used with KCR plug-in connectors and nylon or PU tubing. Compatible tube outside diameters are φ4, φ6, φ8, φ10 and φ12. Thread sizes include M5×0.8, 1/8″, 1/4″, 3/8″ and 1/2″. Hex widths across flats range from 8~22mm and lengths from 10~46mm. The body is primarily made of steel with an ultra-hard surface treatment and does not release copper ions, making it suitable for clean and copper-free applications. Compression sealant is supplied as standard, and the maximum operating pressure is 1.0MPa. Airflow is shut off when the tubing is disconnected, preventing leakage at the fitting. Model codes consist of KCH or KCL followed by a two-digit tube diameter, then “-” and the thread code M5, 01S, 02S, 03S or 04S.

KC Series Pneumatic Quick-Connect Fittings
This page covers two types of KC series pneumatic quick-connect fittings: KCH equal-diameter straight fittings and KCL elbow fittings, suitable for nylon and PU tubing with outside diameters of φ4~φ12 mm. The fitting bodies are made primarily of steel with an ultra-hard surface treatment and do not release copper ions, making them suitable for clean environments and applications where copper is prohibited. The hex width across flats H is 8~22 mm, and the overall length L is approximately 10.4~45.7 mm. Thread sizes include M5×0.8 and 1/8", 1/4", 3/8", and 1/2" pipe threads. The maximum operating pressure is 1.0 MPa, and standard compression sealant is included. The quick-connect design prevents air from escaping through the fitting when the hose is disconnected. KC series products must be used with KCR insert fittings. The same family also includes KCJ straight insert fittings and KCE female-threaded bulkhead fittings.

VHK Series Manual Valves
VHK series manual valves (finger-operated valves) are compact pneumatic directional control valves designed for manually opening, closing and switching air circuits. The catalog lists standard and flame-retardant versions: the standard version uses VHK2 as its model prefix, while the flame-retardant version uses VHK2R. Both the P and A ports have male threaded connections. The model code consists of the model prefix, P port thread size, A port thread size and the R option. Thread sizes listed on this page include 02S and 04F, and the option is R. The compact design is suitable for installations with limited piping space. Refer to the complete catalog for flow rates, operating pressures and materials.

ZH Series Manifold-Mounted Vacuum Generators
The ZH series manifold-mounted vacuum generators are box-type units designed primarily for vacuum gripping in automated equipment, robotic arms, and end-of-line applications. Specifications are identified by body model, with common models including ZH05B, ZH07B, ZH10B, and ZH13B. Two connection codes follow the model number, such as -06-06 or -08-10. Published specifications include maximum suction flow, air consumption, and connection type. The box-shaped body facilitates manifold mounting, and the catalog provides A–P external dimensions for checking installation space. The units accommodate piping with push-to-connect fittings or threaded connections.

Round Container
The round container is a round vacuum generator with an inline design that connects directly to piping without special installation. Quick-connect fittings are included as standard for fast and easy tubing connections. Its molded resin body is lightweight, making it suitable for compact arrangements on automated equipment. At a supply pressure of 0.4 MPa, it achieves a maximum vacuum level of 85 kPa. Exhaust and flow characteristic curves are provided in the catalog to aid selection. Its 3-stage friction tube structure can increase suction flow by 250% while reducing flow consumption by 20%. The product can be equipped with a valve, vacuum pressure gauge, or pressure switch, and can be mounted from the top, bottom, or side. It is suitable for vacuum suction, handling, and pick-and-place applications.

CV Series Vacuum Generator
The CV Series vacuum generator produces negative pressure in pneumatic systems for vacuum operations such as suction cup gripping, handling, and positioning. It uses air as the working medium, with an operating pressure of 0.1~0.6 MPa and an operating temperature of 0~60℃ (no freezing). No lubrication is required. Six nozzle diameters are available: 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 mm. Options include a switch (S) and adjustable control (K). Thread types are Rc (blank) or NPT (N). Compatible mechanical vacuum signal confirmation devices are available in fixed (-S) and adjustable (-SK) versions, with a setting range of approximately -20.0~-53.2 kPa, operating accuracy of ±5.3, and hysteresis of 4.0~13.3. Electrical ratings are AC12V 5A, AC250V 3A, and DC250V 0.2A. Note: The -SK version does not include H at a vacuum level of 86 kPa.

ZFC Series Vacuum Filters
The ZFC series consists of inline vacuum filters installed in the tubing between a vacuum generator (ejector) and a vacuum suction cup. They trap incoming dust, chips, and oil mist to protect the vacuum generator and vacuum switch and extend maintenance intervals. The series is divided by nominal bore into ZFC100 (low flow) and ZFC200 (high flow), with three connection size options: 04B/06B/08B. Compatible tube outer diameters range from 24~30mm (as stated in the source), and rated flow is 10~50 L/min(ANR). The working fluid is air or nitrogen, the operating pressure range is -100~0kPa (vacuum side), and the filtration rating is 10μm. Ambient and fluid temperatures must be 0~60℃ with no freezing, and the filter element withstands a differential pressure of 0.15MPa. The housing is compatible with nylon, soft nylon, PU, and rubber PU tubing. The replaceable filter elements, I-62S-A / I-63S-A, can be changed by unscrewing the bowl, keeping maintenance costs low. Suitable for vacuum suction circuits in electronics, semiconductors, packaging, material handling, and other applications.

EV Series Vacuum Generators
EV series vacuum generators use compressed air discharged at high speed through a nozzle to create negative pressure in a vacuum chamber, enabling suction cups to grip and transport various workpieces. Standard models EV-05~EV-30 have 0.5~3.0mm nozzles, use air as the working fluid, operate at 0~60℃ and 0.1~1.6MPa[1.0~6.0kgf/cm²], and achieve a maximum vacuum of -91.8kPa[-690mmHg], with air consumption of 13~180L/min and an exhaust flow rate of 6~110L/min. High-flow models EV-10HS~EV-30HS provide a maximum suction flow of 27~220L/min and have 1/8~3/4 inlet and vacuum port threads. An AN series serviceable muffler can be fitted to the exhaust port to reduce noise. Optional mechanical vacuum signal confirmation devices include the fixed -S and adjustable -SK types. The fixed setpoint is -39.9kPa[-300mmHg], the adjustable range is -20.0~-53.2kPa[-150~-400mmHg], and the contact ratings are AC125V 5A and AC250V 3A

BK Support Units
BK support units are bearing support assemblies used to secure the end of a ball screw. They feature J-type (J1/J2/J3) bearing configurations and are designed for BK-style support units. The range includes models from BK10 to BK40, accommodating screw diameters of 14–55 mm and providing high-precision support. Specifications include bearing-part diameter, overall length, thread size, keyway dimensions, and more. They comply with the JIS B 1192-1997 standard. Custom end machining is available to meet different installation requirements.

Mechanical Vacuum Signal Confirmation Device (-S/-SK Series)
The mechanical vacuum signal confirmation device detects whether the negative pressure in a vacuum circuit has reached the setpoint. A mechanical pressure-sensing mechanism actuates electrical contacts to output a switching signal, allowing operation without an external power supply. It is commonly used for vacuum confirmation and alarms in applications such as vacuum cup handling and vacuum positioning. Two versions are available: fixed (-S) and adjustable (-SK). The fixed version has a factory setpoint of -39.9kPa (-300mmHg) and cannot be adjusted on site. The adjustable version has a setting range of -20.0~-53.2kPa (-150~-400mmHg) and a factory setpoint of -46.6kPa (-350mmHg); its setpoint can be adjusted with a knob to suit operating conditions. Both versions have an operating accuracy of ±5.3kPa (±40mmHg), hysteresis of 4.0~13.3kPa (30~100mmHg), electrical ratings of AC125V 5A and AC250V 3A, and an operating temperature range of 0~60℃. The device can be used with EV series vacuum generators to create a vacuum circuit integrating vacuum generation and detection.

TO Series Pneumatic Push-to-Connect Fittings
The TO series comprises push-to-connect fittings for pneumatic tubing in four configurations: TO-PC straight male threaded fittings, TO-POC cylindrical hex-socket fittings, TO-PCF straight female threaded fittings, and TO-PMF straight female threaded bulkhead fittings. They provide quick connections between PU/PA/nylon tubing and male or female threaded ports in compressed air systems. The tubing locks in place when inserted and can be released by pressing the collet, without tools, simplifying equipment installation and maintenance. Compatible tube outside diameters are 4, 6, 8, 10, 12, 14, and 16 mm. Thread options include M5 metric fine threads; R1/8, R1/4, R3/8, R1/2, and R3/4 tapered pipe threads; and G1/8, G1/4, G3/8, and G1/2 parallel threads. Bulkhead models also have M10×1, M14×1, M16×1, or M20×1 mounting lock threads. The catalog lists dimensions for each model, including L1 (overall length), L2, L3, H, S (across flats/wrench size), T (thread length), and D1 (thread or bore diameter), to help select fittings for the available installation space. The operating medium is filtered compressed air, and the nickel-plated brass body is fitted with a nitrile rubber seal,

TO-POC Series Cylindrical Hex Socket Fittings
The TO-POC series cylindrical hex socket fitting is a push-to-connect male straight fitting for pneumatic lines. Its cylindrical body has a hex socket on the end face, allowing direct installation with a hex key. It is particularly suitable for confined spaces where tightening from the end is required. It accommodates seven tube outside diameters: 4, 6, 8, 10, 12, 14 and 16 mm. Thread options include M5 metric and five tapered pipe threads: R1/8, R1/4, R3/8, R1/2 and R3/4, with 28 sizes in total. Key dimensions are L1 (overall length), H, S, T (thread) and D1, with overall lengths of approximately 18.5~37 mm. The push-to-connect design uses a retaining clip to grip inserted nylon or PU tubing and an O-ring to seal it, allowing tool-free connection and disconnection. The body is typically nickel-plated brass, with an operating pressure of approximately 0~1.0 MPa and a temperature range of -20~+60 ℃. It is widely used for pneumatic connections in automated equipment, pneumatic actuators and tooling fixtures. The model code is TO-POC+tube outside diameter-thread code; thread codes 01/02/03/04/06 correspond respectively to R1/8, R1/4, R3/8, R1/

TO-PCF Straight Female Thread Fitting
The TO-PCF series straight female thread fitting is a pneumatic push-in tube fitting with a female thread (M5, G1/8, G1/4, G3/8, G1/2) at one end and a push-in connection at the other, suitable for tubing with outside diameters of 4mm, 6mm, 10mm, and 12mm. Made of nickel-plated brass, these fittings offer corrosion resistance and a reliable seal. They are widely used to connect cylinders, valves, and other components in pneumatic systems. Key dimensions include L1, L2, H, and S; values vary by model.

TO-PMF Series Female Straight Bulkhead Fittings
The TO-PMF series consists of female straight bulkhead fittings for secure pneumatic connections through enclosure panels, partitions, or cylinder mounts. The push-in end accepts tubing with outside diameters of φ4, φ6, φ8, φ10, and φ12 mm. Female thread sizes include M5, G1/8 (code 01), G1/4 (code 02), G3/8 (code 03), and G1/2 (code 04). Bulkhead mounting threads are M10×1, M14×1, M16×1, and M20×1, with a hex locknut and sealing washer securing the fitting on opposite sides of the panel. The catalog specifies dimensions including L1 (overall length), L2 (threaded section length), L3 (bulkhead section length), H, S (hex width across flats), T (female thread size), and M (mounting thread) for product selection and panel hole design. These compact, reliably sealed fittings are suitable for routing pneumatic lines through panels in automated equipment.

TO-P Series Push-in Pneumatic Tube Fittings
The TO-P series consists of push-in pneumatic tube fittings in a range of configurations, including straight unions (TO-PU), straight bulkhead unions (TO-PM), elbows (TO-PV), tees (TO-PE), Y-unions (TO-PY), crosses (TO-PZA), straight reducing unions (TO-PG), and reducing tees (TO-PEG). They provide quick connection, branching, and transitions in pneumatic lines using φ4~φ16 tubing. The series covers tube outer diameters of 4/6/8/10/12/14/16. For straight unions and tees, overall length L1 increases from 30mm to 74mm and body outer diameter D1 from φ8 to φ23 as tube size increases. Bulkhead models also specify L2 and M10×1~M24×1 mounting threads for panel mounting. Reducing models are designated by “large-end tube diameter-small-end tube diameter” (e.g., TO-PG8-6) and connect lines with different tube sizes. To install, insert the tube fully; the gripping claws lock automatically. Press the release ring to disconnect. These fittings are widely used in automation equipment, fixtures, and pneumatic control circuits.

TO-PM Series Straight Bulkhead Fittings
TO-PM series straight bulkhead fittings are pneumatic push-to-connect fittings that secure and connect air tubing through panels, partitions or equipment walls. Their bulkhead design features a male-threaded end for mounting through the panel and a push-to-connect port for quick tubing insertion and removal. Compatible tubing outside diameters are φ4, φ6, φ8, φ10, φ12, φ14 and φ16 mm, with corresponding thread sizes from M10×1 to M24×1. Overall length L1 ranges from 30~56 mm, L2 from 17.5~38 mm, and outside diameter D1 from φ8~φ23 mm. Select the fitting to match the tubing outside diameter and mounting thread. Applications include automated equipment, pneumatic control cabinets and tubing connections through panels.

TO-PV Series Elbow Fittings
The TO-PV series consists of push-in elbow fittings for 90° turns in pneumatic lines. They belong to the TO-P series of push-in tube fittings, along with TO-PU straight fittings, TO-PM straight bulkhead fittings, TO-PE tee fittings, TO-PY Y fittings, TO-PZA cross fittings, and TO-PG straight reducing fittings. The series is available in seven sizes for tube outer diameters of φ4, φ6, φ8, φ10, φ12, φ14, and φ16. Model numbers consist of TO-PV followed by the tube outer diameter (for example, TO-PV4 fits φ4 tubing). Two key dimensions to consider when selecting a fitting are L1, the length from the center to the end of the fitting (17.5~37 mm), and D1, the maximum outer diameter of the fitting body (φ8~φ23). Simply insert the tubing to seal and lock it in place. The fittings can be connected and disconnected by hand, making them suitable for applications requiring frequent reconfiguration. Their elbow design allows tubing to turn along edges in tight spaces, reducing the required clearance height. Used with nylon or polyurethane tubing, they are widely applied in compressed-air circuits for automated equipment, fixtures, packaging machinery, and electronics assembly lines.

TO-PE Series T-Shaped Tee Fittings
The TO-PE series consists of T-shaped push-in pneumatic tee fittings with an engineering plastic body and metal retaining clips. They split one air supply into two lines and allow pneumatic tubing to be quickly connected and disconnected without tools. Seven tube outside diameters are supported: φ4, φ6, φ8, φ10, φ12, φ14 and φ16 mm, corresponding to models TO-PE4 through TO-PE16. Key dimensions include L1 (overall length), L2 (distance from the branch center to the end face), and D1 (outside diameter). As tube diameter increases, L1 ranges from 35 mm to 74 mm, L2 from 17.5 mm to 37 mm, and D1 from φ8 to φ23. The fittings are suitable for branching and merging compressed air lines, use air as the working medium, and can be used with PU, nylon and other pneumatic tubing. Other configurations in the series include straight (TO-PU), straight bulkhead (TO-PM), elbow (TO-PV), Y-shaped tee (TO-PY), cross (TO-PZA), and reducing fittings for metal tubing (TO-PEG).

TO-PY Series Y-Type Tee Fittings
The TO-PY series consists of Y-type push-in tee fittings for splitting or combining flow through three φ4~φ12 pneumatic tubes in automated pneumatic systems. Models are designated by tube outside diameter: TO-PY4, TO-PY6, TO-PY8, TO-PY10, and TO-PY12. Overall dimensions range from 33~56 mm for L1 and 8.6~20 mm for L2, with fitting end outside diameter D1 ranging from φ8~φ16. These fittings are suitable for pneumatic circuits requiring compact tubing layouts and can be used with matching nylon or PU tubing. Material, operating pressure, and media temperature are not specified on this page; consult the actual product or complete catalog specifications when selecting a model.

EF Series Screw Support Units
The EF series includes BK-type support units that secure the ends of ball screws and provide axial support. The series is compatible with J-type bearing configurations (J1/J2/J3) and can be used interchangeably with FK, FF, EF, and other types. The table lists key specifications for different models, including ball screw diameter D (14–55 mm), bearing diameter A (10–40 mm), mounting dimensions B/E/F, and thread sizes (M12×1 to M40×1.5). Custom machining of bearing ends is available. These units are widely used in precision drive systems for automation equipment, machine tools, and more.

TO-PZA Series Four-Way Cross Fittings
TO-PZA series four-way cross fittings connect four pneumatic tubes in a cross configuration to split or combine airflow. They fit tubes with outside diameters of φ4, φ6, φ8, φ10, and φ12 mm and feature push-in connections for easy installation. The body is typically made of nickel-plated brass or engineering plastic, providing pressure and corrosion resistance. Model numbers combine TO-PZA with the tube outside diameter; for example, TO-PZA4 fits φ4 tubing. Dimensions are L1: 30~63 mm, L2: 8~18 mm, and D1: φ8~φ18. These fittings are widely used in automated equipment, pneumatic control systems, and other applications.

TO-PUG/TO-PEG Series Pneumatic Push-in Fittings
The TO-PUG/TO-PEG series consists of reducing pneumatic push-in fittings for quickly connecting or branching tubes with two different outside diameters. TO-PUG is a two-way straight fitting, with model numbers comprising the main and branch tube diameters (for example, TO-PUG6-4 connects φ6 and φ4 tubes). TO-PEG is a three-way branch fitting, with the main tube diameter repeated after the main and branch diameters in the model number (for example, TO-PEG6-4-6). The catalog lists dimensions for each size, including L1 overall length, L2 related length, D1 body outside diameter and d1 bore diameter. Main tube diameters range from φ4~φ16 and branch tube diameters from φ4~φ14; L1 is approximately 34~70 mm, D1 is φ12~φ23 and d1 is φ8~φ21. The fittings are suitable for compressed air lines and tubing connections to pneumatic actuators and sensing components. They are easy to connect and disconnect and provide a reliable seal. Some larger sizes are listed by model number only; their dimensions must be confirmed separately.

TO-PEG Series Push-to-Connect Pneumatic Fittings
The TO-PEG series consists of push-to-connect fittings for quickly connecting and adapting pneumatic tubes of different diameters. The catalog specifies D2 and d2 tube outside diameter combinations, with common sizes including φ4, φ6, φ8, φ10, φ12, φ14, and φ16. It also lists overall and mating dimensions such as L1, L2, D1, and d1. Some large/small diameter combinations list only the model number, with dimensions marked “-” and requiring further confirmation. Simply insert the tubes to install, making pneumatic systems easy to assemble and maintain.

TO-PC-G Series Straight Male Thread Push-in Fittings
TO-PC-G series straight male thread push-in fittings connect pneumatic tubing directly to female threaded ports. They accommodate φ4 and φ6 tubing and are available with G1/8, G1/4, G3/8, G1/2 and G3/4 male threads. Models are distinguished by tubing outside diameter and thread size, such as TO-PC4-01G and TO-PC6-03G. The table lists overall and installation dimensions, including L1, H, S1, S2 and D1, to simplify selection and piping layout. The push-in design makes installation easy for automated equipment, pneumatic control cabinets and general industrial air lines.

TO-POC-G Series Cylindrical Hex Socket Fittings
The TO-POC-G series cylindrical hex socket fitting is a push-in male threaded fitting for pneumatic lines. Its cylindrical body has a recessed hex socket at the end, allowing direct installation with a hex key, particularly in confined spaces where an external wrench cannot reach. The other end features a push-in connection that automatically locks and seals when the tube is inserted; press the release ring to disconnect. The fittings accommodate tubing with an outside diameter of φ4 mm or φ6 mm and have G1/8, G1/4, G3/8, G1/2 or G3/4 parallel pipe threads (BSPP), sealed by an end-face seal. The catalog provides overall and installation dimensions including L1, H, S1, S2 and D1 to facilitate piping layout and wrench selection. These fittings are primarily used to connect compressed air lines to cylinders, solenoid valves and air preparation components.

TO-PL-G Right-Angle Threaded Fitting
TO-PL-G series right-angle threaded fittings (male elbows) connect pneumatic tubing to female threaded ports at a 90° angle. They accommodate tubing with outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm and are available with G1/8, G1/4, G3/8 and G1/2 threads. The body is nickel-plated brass and the seal is nitrile rubber. Features include push-in connections, easy installation and reliable sealing. The typical operating pressure range is 0~1.0 MPa, with a temperature range of -20~+80°C. Model numbers consist of TO-PL + tube diameter + thread size code + G. The table provides dimensions including L1, L2, H, S and D1.

TO-PB-G Series Male Branch Tee Fitting
The TO-PB-G series male branch tee fitting creates a branch from the middle of a main pneumatic line, providing a three-way connection with one inlet and two outlets or two inlets and one outlet. It fits tubing with outer diameters of φ4, φ6, φ8, φ10, φ12, φ14, and φ16 mm, and is available with G1/8, G1/4, G3/8, G1/2, and G3/4 threads. Body dimensions are marked L1, L2, H, S, etc., to help with selection based on available installation space. The model code consists of the base model TO-PB, the tube outer diameter, and the thread size code (01G~06G). For example, TO-PB4-01G denotes a fitting for φ4 tubing with a G1/8 thread. This push-in pneumatic fitting is suitable for compressed air lines, offering easy installation and reliable sealing.

TO-PD-G Series Male Branch Tee Fittings
The TO-PD-G series consists of male branch tee push-in fittings for connecting a threaded side branch in pneumatic circuits. The fittings accept tubing with an outside diameter of φ4~φ16mm and feature G-series male threads in sizes including G1/8, G1/4, G3/8, G1/2 and G3/4. The catalog provides dimensions such as L1, L2, H, S and D1 for each combination of tube outside diameter (φ4/φ6/φ8/φ10/φ12/φ14/φ16) and thread size, making selection straightforward. These fittings are widely used for air distribution in automated equipment and for supplying cylinders and valve manifolds.

TO-PH-G Series Panel-Mount Swivel Elbow Fittings
The TO-PH-G series panel-mount swivel elbow fittings are pneumatic push-to-connect threaded fittings for right-angle connections between tubing and female-threaded ports. They allow tubing to be routed around corners in confined spaces. They accommodate tubing outside diameters of φ4~φ16 mm and thread sizes G1/8, G1/4, G3/8 and G1/2, with hex widths across flats S of 14~24 mm. The catalog provides overall and installation dimensions including L1, L2, L3, H, T and S to help select the appropriate tube diameter and thread combination. The swivel design allows the fitting direction to be adjusted during installation. Typical applications include automation equipment, pneumatic control circuits and machinery piping.

TO-PX-G Series Y-Type Three-Way Threaded Fittings
TO-PX-G series Y-type three-way threaded fittings provide a branch connection with one air inlet and two outlets in pneumatic lines. One end has a male thread (G1/8, G1/4, G3/8, G1/2), while the other two ends have push-in connections for tubing with outside diameters of Φ4, Φ6, Φ8, Φ10, and Φ12 mm. Body dimensions include L1, L2, H, and width across flats S: L1 ranges from 34~60 mm, L2 from 8.6~20 mm, H from 5~9 mm, and S from 12~24 mm. The model number consists of TO-PX, the tube outside diameter code (4/6/8/10/12), and the thread size code (01/02/03/04, corresponding to G1/8, G1/4, G3/8, and G1/2 respectively). The final G indicates the threaded type. Suitable for automated equipment, pneumatic control circuits, and similar applications.

TO-SLL Series Swivel Speed Control Valves
TO-SLL series swivel speed control valves regulate the speed of pneumatic actuators (cylinders). The valve body swivels freely to simplify tubing installation in confined spaces. They accommodate tubing with outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm, with connection threads of M5, R1/8, R1/4, R3/8 and R1/2. The model number consists of a main model code (TO-SLL + tube outside diameter) and a thread code (M5/01/02/03/04). The catalog table provides overall dimensions including L1, L2, L3, S and H. These valves are suitable for flow control in pneumatic circuits in automated equipment.

TO-SQ Series Pneumatic Straight Push-in Fittings
The TO-SQ series consists of straight push-in fittings for pneumatic lines, suitable for nylon or polyurethane tubing with an outer diameter of φ4~φ16. Thread options include M5, R1/8, R1/4, R3/8, and R1/2. The push-in design seals and locks the tube upon insertion; press the release ring to disconnect it, making pneumatic systems quick to assemble and maintain. The catalog provides installation dimensions including L1, L2, L3, H, S, and body outer diameter D1. Fittings can be selected by tube outer diameter and thread size and are widely used in automation equipment, fixtures, pneumatic actuators, and air distribution systems.

TO-SL-G Series One-Way Flow Control Valves
TO-SL-G series one-way flow control valves regulate actuator speed in pneumatic circuits. They allow free flow in one direction and restrict flow in the opposite direction. Push-in fittings provide quick connections for Φ4 and Φ6 tubing. Valve port thread sizes include G1/8, G1/4, G3/8 and G1/2. Models are distinguished by tubing outside diameter and port thread combinations. The catalog provides overall and mounting dimensions, including L1, L2, L3, H and S. These valves are suitable for cylinder speed control and flow regulation in pneumatic fixtures and automated equipment. They are standard pneumatic flow control components and can be selected according to tubing size and port thread.

TO-SQ-G Straight One-Way Flow Control Valve
The TO-SQ-G series comprises straight one-way flow control valves (in-line throttle valves) with push-in tube connections and G threads. They regulate the speed of pneumatic actuators such as cylinders. Each valve combines a check valve with an adjustable throttle, restricting flow in one direction and allowing free flow in the other. Flow is adjusted by turning the adjustment screw. The valves accommodate tube outer diameters of Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16 mm, with G1/8, G1/4, G3/8 and G1/2 connection threads. The catalog provides overall and mounting dimensions including L1, L2, L3, H and S to facilitate piping layout.

TO-SQF-G Inline Speed Control Valve with Female Threads
The TO-SQF-G series consists of inline speed control valves with female threads for regulating the speed and airflow of pneumatic actuators. The valve body has female threaded connections in G1/8, G1/4, G3/8, and G1/2 sizes. An inline adjustment knob changes the throttle opening to regulate the operating speed of cylinders and other actuators. The catalog provides overall and connection dimensions including L1, L2, L3, H, T, T2, S, and H2. Models range from TO-SQF1/8-01G to TO-SQF1/2-04G. Compact and easy to adjust, these valves are suitable for pneumatic circuits in automated equipment.

KN-PL All-Brass Male Elbow Fitting
The KN-PL all-brass male elbow is a pneumatic push-in fitting with a male threaded connection. Made entirely of brass, it is suitable for pneumatic tubing with an outside diameter of 4mm or 6mm. It is available in a range of thread sizes, including M5, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4 and G1/2, to suit different installation needs. Its right-angle design makes tubing easier to route in confined spaces, and it is widely used in automation equipment and pneumatic control systems. Key dimensions include L, L1, S1, S2 and H; values vary by model.

BXGKN-PL Stainless Steel Female Threaded Elbow Fitting
The BXGKN-PL series consists of stainless steel female threaded pneumatic tube fittings (90° elbows). Their stainless steel bodies offer better corrosion resistance than all-brass versions, making them suitable for air, water, and other fluid lines. They accommodate tube outer diameters of 4 mm and 6 mm, with thread sizes including M5, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, and G1/2. Model numbers combine tube diameter and thread codes, such as KN-PL4-M5 and KN-PL6-02; stainless steel versions have the BXG prefix, as in BXGKN-PL4-M5. See the specification table for body hex sizes S1/S2 and dimensions L, L1, and H. These fittings enable right-angle connections in confined spaces and are widely used in automation equipment, pneumatic control cabinets, and corrosion-sensitive semiconductor and food applications.

KN-PB T-Type All-Steel Three-Way Threaded Fitting
The KN-PB series comprises T-type all-steel three-way threaded fittings for splitting a pneumatic air supply into two lines or connecting a branch line in a T configuration. One end has a push-in tube connection for tubing with an outside diameter of 4 mm or 6 mm; the other has a male thread in sizes M5, R1/8, R1/4, R3/8, R1/2 or R3/4, for direct connection to threaded ports on common pneumatic components, solenoid valves and cylinders. Key dimensions include overall length L (starting at 36 mm), threaded end length L1, across-flats widths S1 and S2, and height H. Some models specify tube outside diameter D and inside diameter d, such as 4×Φ2.5, 10×Φ6.5 and 16×Φ12. The all-steel version is designated KN-PB; the stainless steel version with the same configuration is designated BXGKN-PB. The series is suitable for piping and air distribution in automated equipment, jigs and fixtures, and general industrial pneumatic systems.

KN-PD Series All-Steel T-Type Side-Threaded Tee Fittings
The KN-PD series consists of all-steel T-type side-threaded tee fittings for pneumatic lines requiring a three-way connection with a threaded port on the side. They fit tubing with outside diameters of 4, 6, 8, 10, 12, 14, and 16 mm, with thread sizes M5, R1/8, R1/4, R3/8, R1/2, and R3/4. Listed dimensions are approximately L 35~66.5 mm, L1 18~33.5 mm, S1 8~21 mm, S2 10~27 mm, and H 5~13 mm. The fittings are available in all-steel construction, with a BXGKN-PD stainless steel version for applications requiring corrosion resistance. Select the model according to the tube diameter and thread size.

KN Series All-Brass Pneumatic Fittings
The KN series consists of all-brass pneumatic push-in fittings. This page covers three subseries: KN-PH right-angle banjo fittings, KN-PZR threaded four-way cross fittings, and KN-SL one-way flow control valves. Equivalent BXGKN stainless steel (SUS304) products are also available. Suitable tube outer diameters are Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, and Φ16mm, with thread sizes M5, R1/8, R1/4, R3/8, R1/2, and R3/4. They are used to change direction at right angles, split compressed air flow, and control cylinder speed. Dimensions are specified as L/L1/L2 lengths, S1/S2 widths across flats, H height, and T thread size, with D×d(Φ) mounting hole diameter also provided. Select the model according to the combination of tube outer diameter and thread size.

KN-PZR All-Brass Threaded Cross Fitting
The KN-PZR series all-brass threaded cross fittings split or combine flow in four directions in pneumatic lines. The body is made of brass; a stainless steel BXGKN-PZR version is also available. Compatible tube outer diameters are Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16 mm, with M5, R1/8, R1/4, R3/8, R1/2 and R3/4 threaded connections. The catalog provides overall and thread dimensions including L, L1, S1, S2, H and T to assist with fitting selection and installation. Model numbers consist of KN-PZR + tube outer diameter + thread code, for example KN-PZR4-M5 and KN-PZR16-06.

KN-SL All-Steel One-Way Flow Control Valve
KN-SL series all-steel one-way flow control valves, including the BXGKN-SL stainless steel version, regulate the speed of pneumatic actuators. Their one-way throttling design allows free intake flow and throttled exhaust flow. They accommodate Φ4 and Φ6 tubing, with port threads of M5, R1/8, R1/4, R3/8 and R1/2. The catalog table provides overall and mounting dimensions, including L, L1, L2, S1, S2 and H, as well as the D×d(Φ) parameter. Select a model based on tube diameter, thread size and dimensions. The all-steel valve body offers high strength, while the stainless steel version is suited to corrosive environments.

KN-PE Series All-Steel Tee Fittings
KN-PE series all-steel tee fittings are push-in fittings for pneumatic systems, designed to split or combine compressed air and other gas flows in a T-shaped configuration. They are available in seven tube outer diameter sizes: φ4, φ6, φ8, φ10, φ12, φ14 and φ16, corresponding to models KN-PE4~KN-PE16. Overall dimensions range from 36~67 mm for L, 18~33.5 mm for L1 and 8~21 mm for S1; D×d dimensions are also specified (e.g., 4×φ2.5). The all-steel construction is suitable for applications requiring strength, wear resistance and corrosion resistance. BXGKN-PE stainless steel tee fittings are also available in the same series. To install, simply insert the air tube into the fitting. The number in the model indicates the compatible tube outer diameter.