Transmission Accessories — Page 4

CPCKP Series Ball-and-Fork Universal Joint Couplings

CPCKP Series Ball-and-Fork Universal Joint Couplings

Designed for two non-parallel shafts, these couplings allow the connected shafts to rotate continuously at an angle to each other while reliably transmitting torque and motion. They provide a wide angle of compensation and can be used at angles of up to 30°. The simple design features detachable joints, telescoping capability, and high transmission efficiency for easy maintenance. Finished bores are H7 and can be machined with keyways, pin holes, hexagonal bores, or square bores as required. Available in 304 stainless steel. The standard surface finish is blackened; nickel plating, zinc plating, chrome plating, and polishing are available on request.

DKA1-DKWL Expansion Sleeve-Type Single/Double Diaphragm Coupling

DKA1-DKWL Expansion Sleeve-Type Single/Double Diaphragm Coupling

The DKA1-DKWL expansion sleeve-type single/double diaphragm coupling is made of No. 45 steel with a blackened surface finish. Its wide allowable eccentricity range makes it adaptable to a variety of drive systems. It can be installed and removed quickly, with excellent repeatability. It requires no lubrication and operates without noise or wear. With no sliding-friction transmission components, it helps reduce energy loss. Its simple, lightweight design requires no maintenance, and faults can be checked with minimal downtime. It adapts well to different environments and can operate at high temperatures. It offers high transmission accuracy, reliability, and a long service life. Suitable for applications requiring precise alignment and compensation for angular misalignment, it is widely used in automation equipment, precision machinery, and other fields.

DPC21 Set-Screw Coupling, DPC31 Screw-Clamp Coupling

DPC21 Set-Screw Coupling, DPC31 Screw-Clamp Coupling

The DPC21 is a set-screw coupling, while the DPC31 is a screw-clamp coupling. This series is made of stainless steel with a polished finish and uses cylindrical screws as fasteners. Features include high rigidity, making it suitable for servo motors; zero backlash; identical performance in clockwise and counterclockwise rotation; and compensation for radial, angular, and axial misalignment. The allowable values for eccentricity, angular misalignment, and axial displacement apply individually, so the allowable values are reduced when multiple types of misalignment occur simultaneously.

DPC31 Screw-Clamp Type

DPC31 Screw-Clamp Type

The DPC31 series features screw-clamp couplings made of polished stainless steel and fitted with socket head cap screws. They offer high rigidity and are suitable for servo motors, with zero backlash and identical performance in clockwise and counterclockwise rotation. They compensate for radial, angular, and axial misalignment. Since the allowable values for eccentricity, angular misalignment, and axial displacement are specified separately, the allowable values are reduced when multiple types of misalignment occur simultaneously.

DT5 Series Timing Belts

DT5 Series Timing Belts

DT5 series industrial timing belts have model numbers consisting of the DT5- prefix followed by the length in millimeters. The number of teeth is proportional to the belt length. Designed for precision power transmission in factory automation equipment, they are available in a range of lengths, including 410 mm, 460 mm, and 590 mm, each with a corresponding tooth count. The belt is made from wear-resistant materials for smooth, reliable operation.

UL-Type Tire Coupling

UL-Type Tire Coupling

The UL-type tire coupling is a highly flexible coupling made by vulcanizing and bonding a rubber element (the tire body) to metal plates. During installation, bolts connect it directly to the two coupling halves. It offers excellent flexibility, high damping, and substantial compensation capacity, effectively absorbing shock and vibration while compensating for axial misalignment. With an operating temperature range of -20 to 80°C and a torque range of 10–20,000 N·m, it is suitable for damp, dusty conditions and applications involving impact, vibration, frequent changes in direction, and frequent starts. It is easy to install, remove, and maintain, requires no lubrication, and is durable and reliable. Models UL1 through UL13 are available, covering diameters of 80–400 mm and thicknesses of 20–110 mm. They are widely used in various types of power transmission machinery.

F-Series Flexible Couplings

F-Series Flexible Couplings

F-series flexible couplings use elastic tire elements and are suitable for operating temperatures of approximately -50°C to +50°C. They offer fire resistance, antistatic properties, and enhanced heat and oil resistance. Available sizes include F40, F50, F60, F70, F110, and F120, as well as the F40-60 series. Types B, F, and H are available, with options for special bore configurations such as keyways, hexagonal bores, square bores, and splined bores. The catalog coding system identifies specific specifications, while product models are designated directly by size. When selecting a coupling, refer to parameters such as outside diameter, bore length, and bore size.

J-FLEX Rubber Gear Flexible Coupling

J-FLEX Rubber Gear Flexible Coupling

The J-FLEX rubber gear flexible coupling combines a rubber gear elastomer with metal gears. It is available with two elastomer types: Type J, featuring a black rubber gear elastomer, and Type H, featuring a red gear elastomer. The rubber gear elastomer has a hardness of 90° ± 2° and is made from durable, heat- and oil-resistant high-strength rubber, using grade 7 chlorosulfonated polyethylene (CSM) and styrene-butadiene rubber (SBR). The metal gears are made of 45# steel and finished with paint. Non-standard configurations and special materials can be custom ordered to meet specific operating requirements. Suitable for drive applications requiring shock absorption, vibration damping, and compensation for shaft misalignment.

DIC Aluminum Alloy Parallel-Line Clamping Series

DIC Aluminum Alloy Parallel-Line Clamping Series

DIC aluminum alloy parallel-line clamping couplings feature an integrated, high-strength aluminum alloy construction. Their elastic design compensates for radial, angular, and axial misalignment. The backlash-free shaft-to-hub connection is suitable for bidirectional rotation and is designed specifically for encoders and stepper motors. The couplings are secured with clamping screws and have an anodized surface finish. Available in various sizes, including DIC-12×18.5 and DIC-16×18, with custom specifications available.

DI Series

DI Series

DI Series couplings feature an integrated, high-strength aluminum alloy construction. Their flexible design compensates for radial, angular, and axial misalignment, providing a zero-backlash connection suitable for forward and reverse rotation. Designed specifically for encoders and stepper motors, they are secured with clamping screws. Models include DI-12×18.5, DI-16×18, and DI-16×23. See the product specifications for exact dimensions.

DC Series Couplings

DC Series Couplings

The DC series includes two types of couplings: aluminum-alloy spiral-cut clamp couplings and magnetic couplings. The spiral-cut clamp type features a one-piece, high-strength aluminum-alloy construction and a spring-like design that absorbs shock. Designed specifically for encoders and micro motors, it is secured with clamping screws. The magnetic coupling uses non-contact magnetic coupling to provide zero-leakage power transmission. It offers overload protection, energy efficiency, and tolerance for greater installation misalignment, making it suitable for applications with stringent leakage requirements. Both types are available in various sizes and can be custom-made to non-standard specifications.

DM Aluminum Alloy Spring-Type Set-Screw Coupling Series

DM Aluminum Alloy Spring-Type Set-Screw Coupling Series

DM-series aluminum alloy spring-type set-screw couplings feature a one-piece, high-strength aluminum alloy construction and a spring-like design. Their flexibility compensates for radial, angular, and axial misalignment while providing shock absorption. Designed specifically for encoders and miniature motors, they are secured with set screws. Available in a range of sizes with freely selectable bore combinations, H7/H8 tolerance grades, and custom specifications. Rated torque: 0.3–20 N·m; permissible eccentricity: 0.1 mm; permissible angular misalignment: 2°; permissible axial misalignment: ±0.15 mm; maximum speed: 30,000 RPM.

DIG Stainless Steel Parallel-Line Set-Screw Series

DIG Stainless Steel Parallel-Line Set-Screw Series

This series features stainless steel parallel-line set-screw couplings with an integrated design made entirely of stainless steel for excellent corrosion resistance. The backlash-free shaft-to-sleeve connection is suitable for applications involving rotation in both directions and is designed specifically for encoders and stepper motors. Fastening is by set screw or clamping screw. Custom designs and special materials are available to meet the requirements of demanding operating conditions. The standard surface finish is polished, and the included accessories are fastening screws.

DICG Stainless Steel Parallel-Line Set-Screw Series

DICG Stainless Steel Parallel-Line Set-Screw Series

DICG Stainless Steel Parallel-Line Set-Screw Series couplings feature a one-piece stainless steel construction with excellent corrosion resistance. Their zero-backlash shaft-to-hub connection is suitable for clockwise and counterclockwise operation and is specially designed for servo motors and stepper motors. Set-screw fastening ensures a secure connection. Available in four standard models, with outer diameters of 16 mm and 20 mm and lengths of 18–26 mm. The surface is polished, and fastening screws are included.

DMG Stainless Steel Helical Set-Screw Series

DMG Stainless Steel Helical Set-Screw Series

The DMG Stainless Steel Helical Set-Screw Series is a one-piece flexible coupling made of stainless steel. Its spring-like design compensates for radial, angular, and axial misalignment, making it ideal for encoders and miniature motors. It features set-screw fastening and is available in 304 or 316 stainless steel with a polished finish. Custom sizes are available, along with bore options such as keyways, hexagonal bores, square bores, and splined bores.

DCG Stainless Steel Helical Beam Set-Screw Coupling

DCG Stainless Steel Helical Beam Set-Screw Coupling

The DCG series stainless steel helical beam set-screw coupling is made from a single piece of stainless steel. Its spring-like design provides cushioning and compensates for radial, angular, and axial misalignment. Designed for encoders and miniature motors, it is secured with clamping screws. The surface is polished, and fastening screws are included. Custom sizes and bore shapes are available, including keyways (add K), hex bores (add F), square bores (add S), and spline bores (add H). Suitable for precision power transmission, it is available in a range of outer diameters and lengths, with a wide selection of bore sizes.

DPS Plastic Encoder Coupling Series

DPS Plastic Encoder Coupling Series

DPS plastic encoder couplings are made primarily of PU (polyurethane), offering excellent flexibility and elasticity as well as high resistance to torsional failure. Designed specifically for encoders, they feature set-screw fastening for easy installation. The series offers high flexibility to compensate for radial, angular, and axial misalignment, with zero backlash and consistent performance in both clockwise and counterclockwise rotation. Suitable for applications requiring high-precision transmission, such as servo motors. A commonly used model is DPS-15×22, with an outer diameter of 15 mm, a length of 22 mm, a 6 mm bore, a rated torque of 0.6 N·m, allowable eccentricity of 0.2 mm, allowable angular misalignment of 2.5°, and a maximum speed of 4,000 RPM. Custom specifications are available, including a keyway (suffix K), hex bore (suffix F), square bore (suffix S), or splined bore (suffix H).

DD Encoder Spring Series

DD Encoder Spring Series

DD encoder spring series couplings feature an aluminum alloy body and a spring steel flexible element. Their simple design offers good flexibility, low inertia, a large angular misalignment allowance, and easy installation. The spring steel element effectively compensates for radial, axial, and angular misalignment. Suitable for miniature motors and encoders, they are secured with set screws. Standard surface treatment is used by default; custom specifications and special materials are available. Models include DD-16×25, DD-16×35, and DD-26×50.

DB Aluminum Alloy Figure-Eight Encoder Coupling Series

DB Aluminum Alloy Figure-Eight Encoder Coupling Series

The DB series aluminum alloy figure-eight encoder coupling is a flexible coupling designed specifically for encoders. Its hubs are made of high-strength aluminum alloy with an anodized finish, while the elastomer is made of polyurethane that resists oil and oxidation. The series offers excellent flexibility and resists torsional breakage, effectively compensating for radial, axial, and angular misalignment. Available models include DB-15×24, DB-15×31, DB-18×28, DB-18×38, DB-25×45, and DB-25×56. The outer diameter ranges from 15 to 25 mm, and the length from 24 to 56 mm. Custom bore sizes are available to meet a variety of encoder mounting requirements. Rated torque is 0.5–1 N·m; allowable eccentricity is 1 mm, allowable angular misalignment is 2°, allowable axial misalignment is ±2.5 mm, and allowable speed is 5,000–8,000 RPM. Suitable for miniature motor and encoder drives.

DR-DRC Economical Bellows Coupling

DR-DRC Economical Bellows Coupling

The DR-DRC series is an economical bellows coupling featuring a stainless-steel bellows flexible element. Its excellent flexibility compensates for radial, angular, and axial misalignment. It performs identically in clockwise and counterclockwise rotation, ensuring constant-velocity rotation. The body is made of stainless steel or aluminum alloy and has an anodized surface for strong corrosion resistance. The bellows is laser-welded to the hubs, providing zero rotational backlash and suitability for reversing operation. Set-screw fastening. Products are available in set-screw and clamp-style versions, with accessories including hex-socket set screws or hex-socket head cap screws. The DRG subseries features polished all-stainless-steel construction, freely configurable bore combinations, and custom specifications. Suitable for precision power transmission, servo motor connections, and similar applications.

DRG Series Bellows Couplings

DRG Series Bellows Couplings

DRG series stainless steel bellows couplings feature 304/316 stainless steel bellows flexures laser-welded to the hubs for zero backlash and bidirectional operation. They effectively compensate for radial, angular, and axial misalignment. Made entirely of stainless steel, they offer excellent corrosion resistance and a polished surface finish. Common sizes have outside diameters of 16–32 mm and lengths of 27–42 mm, with rated torques of 1.2–3.7 N·m and allowable speeds of 10,000–16,000 rpm. Custom bore sizes are available to suit different shaft diameters. These couplings are widely used in precision power transmission, automation equipment, and other applications.

DRCG Stainless Steel Bellows Clamping Series

DRCG Stainless Steel Bellows Clamping Series

DRCG series stainless steel bellows clamping couplings are made entirely of 304/316 stainless steel for excellent corrosion resistance. The bellows are laser-welded to the hubs, providing zero rotational backlash and making the couplings suitable for operation in both directions. The bellows design effectively compensates for radial, angular, and axial misalignment. The clamping-screw fastening method makes installation easy. The surface is polished, and set screws are included. Custom specifications are available. Key parameters include outer diameter D, length L, and bore diameters d1 and d2.

DLK Bellows Coupling with Expansion Sleeve

DLK Bellows Coupling with Expansion Sleeve

The DLK series bellows coupling with expansion sleeve uses an expansion-sleeve connection for zero rotational backlash and easy assembly and disassembly. Its flexible bellows design effectively compensates for radial, angular, and axial misalignment, with identical rotational performance in clockwise and counterclockwise directions. The main body is made of S45C steel, and the bellows are made of stainless steel. The polished surface provides good corrosion resistance. Suitable for reversing and high-precision drive applications. Models range from DLK1-40 to DLK1-1600 in increments of 5, with different outside-diameter specifications.

SK Schmidt Parallel Coupling

SK Schmidt Parallel Coupling

The SK Schmidt parallel coupling features a compact design and exceptional capacity to accommodate large parallel misalignment. Made from high-rigidity materials, it generates no restoring force when misaligned and keeps the distance between the two shafts unchanged. It is widely used in automated equipment such as packaging machinery, paper-making machines, forming equipment, printing machinery, woodworking machinery, cutting machines, carton-folding machines, and ceramic roller machines. Select a product using the model code format SK-[Length]-[Maximum Permissible Misalignment]-[OD]-[Number of Links]. A range of standard models is available to meet different torque, speed, and misalignment requirements.

DGH Aluminum Alloy Oldham Coupling Series

DGH Aluminum Alloy Oldham Coupling Series

The DGH series of aluminum alloy Oldham couplings includes two designs: set-screw and short clamp. The hubs are made of high-strength aluminum alloy, and the center disc is made of imported PA66, offering excellent wear and corrosion resistance as well as electrical insulation. The sliding-disc design effectively compensates for radial and angular misalignment, while the detachable construction makes installation easy. Set-screw models are secured with set screws, and short-clamp models with clamping screws. Outer diameters range from 12 mm to 70 mm; lengths vary by model, and multiple bore diameters are available. These couplings are suitable for low-speed drive applications requiring misalignment compensation. Custom specifications and special materials are available.

DGH Aluminum Alloy Oldham Couplings with Set Screws

DGH Aluminum Alloy Oldham Couplings with Set Screws

This series of aluminum alloy Oldham couplings features high-strength aluminum alloy hubs and imported PA66 discs, offering excellent wear resistance, corrosion resistance, and electrical insulation. The sliding design effectively compensates for radial and angular misalignment, while the detachable construction makes installation easy. Fastening options include set screws or clamping screws. A range of models is available, with outer diameters of 16–70 mm, lengths of 18–77 mm, and bore sizes of 4–38 mm, making them suitable for shaft connections in automation equipment. The surface is anodized, and custom specifications are available.

DHG Stainless Steel Oldham Couplings with Set Screws

DHG Stainless Steel Oldham Couplings with Set Screws

DHG series stainless steel Oldham couplings feature a body made of imported SUS304 stainless steel and a center disc made of imported aluminum bronze, offering excellent wear and corrosion resistance along with high rigidity. The sliding design effectively compensates for radial and angular misalignment, while the removable construction makes installation easy. The couplings have keyways and are secured with set screws. Suitable for precision drive applications, the bore can be customized as required. Common tolerances: H7/H8.

DHCG Stainless Steel Oldham Coupling

DHCG Stainless Steel Oldham Coupling

The DHCG Series stainless steel Oldham coupling features a body made from imported SUS304/316 stainless steel and a center slider made of aluminum bronze, offering excellent wear and corrosion resistance. Its sliding design effectively compensates for radial and angular misalignment. The detachable construction makes installation easy, and the coupling is secured with clamping screws. The bore is machined to H7/H8 tolerances, and custom specifications are available. A wide range of bore diameters is offered, making it suitable for a variety of precision power transmission applications. Rated torque: 3–75 N·m; permissible radial misalignment: 0.5–1.5 mm; permissible angular misalignment: 0.5–0.6°; maximum speed: 8,000 rpm.

DHP Stainless Steel High-Torque Oldham Coupling, Set-Screw Series

DHP Stainless Steel High-Torque Oldham Coupling, Set-Screw Series

DHP Series stainless steel high-torque Oldham couplings feature a body made from imported SUS304 stainless steel and a center slider made from imported POM, offering excellent wear and corrosion resistance along with high rigidity. The sliding design effectively compensates for radial and angular misalignment. The detachable design makes installation easy. These couplings feature keyways and are secured with set screws. Designed for high-torque transmission, they have rated torques of 1–25 N·m, allowable eccentricity of 0.3–2.2 mm, an allowable angular misalignment of 2°, allowable axial misalignment of ±0.2–±0.25 mm, and maximum speeds of 3,500–9,000 rpm. Bore sizes can be custom-made to customer specifications and are machined to standard H7/H8 tolerances. Available in a range of outside-diameter and bore combinations, with custom options also available.

DHPC Stainless Steel High-Torque Oldham Clamping Coupling Series

DHPC Stainless Steel High-Torque Oldham Clamping Coupling Series

The DHPC series comprises high-torque stainless steel Oldham clamping couplings. The main body is made of imported SUS304 stainless steel, while the center slider is made of imported POM, providing excellent wear and corrosion resistance and rigidity. The sliding design effectively compensates for radial and angular misalignment. Its detachable construction makes installation easy, and the coupling is secured with a clamping mechanism. Available in multiple sizes, the series offers rated torques of 1.6–3.2 N·m, allowable eccentricity of 0.6–2.2 mm, an allowable angular misalignment of 2°, allowable axial misalignment of ±0.12–±0.25 mm, and maximum speeds of 3,500–8,000 rpm. Suitable for precision power transmission applications.

WH-Type Slider Coupling

WH-Type Slider Coupling

The WH-type slider coupling uses a square cross slider that moves within radial slots to compensate for radial and angular misalignment. It is suitable for low-speed, high-torque applications such as ball mills. The series includes 10 sizes, from WH1 to WH10, with a nominal torque range of 16–5000 N·m and a maximum speed of 10,000 rpm. Bore diameters can be configured to meet customer requirements; H7/H8 tolerances are used, and custom specifications are available. This coupling is noisy, inefficient, and subject to rapid wear, so it should only be used in low-speed applications.

DJSL Oldham Coupling

DJSL Oldham Coupling

The DJSL series Oldham coupling uses an intermediate slider that moves within the radial grooves of the two coupling halves. It accommodates significant radial displacement between the shafts, as well as small angular and axial displacements. Made of No. 45 steel with a black oxide finish, it comes with fastening screws. The nominal torque range is 120–80,000 N·m, the permissible speed is 250 rpm, and the bore diameter range is 15–200 mm. Suitable for low-speed drives with significant radial misalignment.

SL-C Double-Taper Locking Assembly

SL-C Double-Taper Locking Assembly

The SL-C double-taper locking assembly is made from Grade 45 structural steel, which offers excellent overall mechanical properties and withstands high friction forces during operation. It is easy to disassemble, improving work efficiency and making machine components easier to maintain. Its compact design provides high stability and reduces errors. The hub and shaft do not move axially relative to each other during locking. The surface is polished. Example selection: SL-C-24×50. The bore and length can be selected to suit actual requirements.

FL-A Flange Single-Taper Locking Assembly

FL-A Flange Single-Taper Locking Assembly

The FL-A series flange single-taper locking assembly is made of 45# steel and has a smooth surface finish. A recess is provided at the shoulder of the inner ring. Tightening the locking bolts presses the inner sleeve against the coupling bore, effectively controlling runout on the coupling end face and outer diameter for precise positioning. The coupling does not move axially when the bolts are tightened. The product has an inner diameter range of 5–? and an outer diameter range of 16–?. It is used to create keyless connections between shafts and sleeves and transmit torque. Custom specifications and special materials are available on request.

SL-E Series Locking Assembly

SL-E Series Locking Assembly

The SL-E locking assembly is a single-taper locking disc designed for keyless connections between a shaft and a hub. Clamping force is applied externally to the hub, creating a mechanical press fit between the shaft and hub to transmit torque. The locking assembly itself does not transmit torque or bear loads, and is easy to install and remove. The main body is made of 45 steel and comes with a standard bright finish. Black oxide, nickel plating, zinc plating, phosphating, and other finishes are available. Standard sizes start at a shaft diameter (d) of 12 mm, with the outer diameter (D) varying accordingly. See the specifications table for details. Custom sizes and special materials are available to meet the needs of demanding operating conditions. Suitable for shaft-hub connections in a wide range of mechanical drive systems, it offers an alternative to traditional keyed connections.

FL-AB Series Locking Assembly

FL-AB Series Locking Assembly

The FL-AB Series is a single-taper locking disc assembly for keyless connections between shafts and hubs. Clamping force is applied externally to the hub, creating a mechanical interference fit between the shaft and hub to transmit torque. The locking assembly itself does not transmit torque or load, and is easy to install and remove. The FL-AB Series is available for shaft diameters from 22 mm to 70 mm. Each shaft diameter has corresponding hub-bore pressure and thermal yield strength requirements for the hub material; see the performance table for details.

FL-AP Series Locking Assembly

FL-AP Series Locking Assembly

The FL-AP Series Locking Assembly provides a keyless connection between a shaft and a hub. External clamping force creates a mechanical interference fit to transmit torque. At the same shaft contact pressure, this series offers specific thermal yield strength values for the hub material (for example, a thermal yield strength of 159 MPa at a shaft contact pressure of 22 MPa, and 152 MPa at 70 MPa). See the technical tables for detailed specifications. The product is typically made of 45# steel, and custom surface treatments are available, including black oxide, nickel plating, zinc plating, and phosphating.

FL-AS Series Locking Assemblies

FL-AS Series Locking Assemblies

The FL-AS series is a locking assembly for keyless shaft-to-hub connections, designed for mechanical joints that need to transmit torque. External clamping force creates a mechanical interference fit between the shaft and hub, making installation and removal easy. Specifications include shaft-side pressure, hub-bore pressure, and the thermal yield stress of the hub material; values vary with shaft diameter. Shaft diameters range from 22 mm to 70 mm, with corresponding differences in mechanical performance. The series is commonly used in automation equipment, power transmission systems, and similar applications.

EL-S Series Locking Assembly

EL-S Series Locking Assembly

The EL-S series is a thin-walled, single-taper locking assembly made of 45# steel with a polished surface. Its bolts can be installed directly on the hub. With a small difference between the inner and outer diameters and a thin wall, it is suitable for small hubs and especially well suited to aluminum pulleys. Product specifications cover various bore diameters (d = 10–30 mm), with corresponding permissible maximum torques (18–149 N·m), permissible axial loads (3.59–10.0 kN), shaft-side pressure, and hub bore pressure. Refer to the selection procedure to choose the type and specifications when placing an order.

FL-F Thin-Wall Tapered Sleeve Locking Assembly

FL-F Thin-Wall Tapered Sleeve Locking Assembly

The FL-F series is a thin-wall tapered sleeve locking assembly featuring a small difference between the inner and outer diameters and a compact design, making it suitable for close-fit roller applications. The inner sleeve contacts the end face of the wheel hub. Tightening does not cause axial movement of the coupling section, effectively limiting runout of its end face and outer diameter relative to the shaft and providing a centering effect. Tightening the locking bolts causes no axial movement in the wheel bore, and the product has no backlash. It is typically made from 45 steel with a polished surface finish. Custom designs and special materials are available. The inner and outer diameters are the main selection parameters; for example, FL-F-5×12 indicates an inner diameter of 5 mm and an outer diameter of 12 mm.

ML-D Wedge-Type Locking Assembly

ML-D Wedge-Type Locking Assembly

The ML-D series wedge-type locking assembly (expansion sleeve) is made of 45# steel and can be finished with polishing, heat treatment, nickel plating, zinc plating, phosphating, and other surface treatments. Its high-strength design relies on frictional transmission. In the event of an overload, the assembly disengages, effectively protecting the equipment from damage. Locking assembly connections can withstand heavy loads, are available in designs for various load capacities, and support the use of multiple assemblies in series. Product parameters include an inner diameter d of 12–35 mm, shaft-side surface pressure, hub-side surface pressure, and the minimum outer diameter of the wheel. The assembly suits a range of shaft-and-bore fits and is widely used to connect shafts to hubs in mechanical transmission systems.

EL-D Single-Taper Locking Assembly

EL-D Single-Taper Locking Assembly

The EL-D Single-Taper Locking Assembly consists of inner and outer tapered rings. Its compact, lightweight design makes it suitable for applications with limited installation space. It can replace various rigid or interference-fit connections. Multiple pairs of locking rings can be used to transmit higher loads, with up to 4 pairs compressed on one side or 8 pairs on both sides. It offers good concentricity. Made of 45 steel with a smooth surface finish, it is available in double-taper, tapered-tube, tapered-ring, and conical designs. Shaft diameters range from 45 to 440 mm, outer diameters from 52 to 460 mm, and lengths from 10 to 65 mm. It can transmit axial forces of 8.6–59.0 kN and torques of 143.3–2100.3 Nm. H7/H8 tolerances are recommended for the bore-to-shaft fit. Custom specifications are available.

AL-S Straight-Through Double-Taper Locking Assembly

AL-S Straight-Through Double-Taper Locking Assembly

The AL-S straight-through double-taper locking assembly consists of an open double-taper inner ring, a double-taper outer ring, and two double-taper clamping rings. It is tightened with hex socket head cap screws, while the elastic rings remain axially stationary. Compared with the AL type, it generates greater radial pressure under the same clamping force and can transmit higher loads. The clamping rings have removal holes (2–4 around the circumference). Made of 45# steel with a smooth surface finish, it is widely used in packaging, printing, textile, machine-tool, and other machinery. Dimensions: inner diameter Φd 95–1065 mm, outer diameter ΦD 135–4355 mm, and length L 38–72 mm. It can transmit an axial force of 196–745 N and torque of 9326–31032 N·m, with contact pressure of 152–258 N/mm². It is supplied with hex socket head cap screws in various sizes (M10–M14), with tightening torques of 69–190 N·m.

AL-G Locking Assembly

AL-G Locking Assembly

The AL-G locking assembly features a straight-through, multi-taper design. It is made of 45# steel and finished with a smooth surface. Compared with the A4 type, all taper rings have the same taper, and a flange in the middle of the inner ring makes removal easier. Its longer contact surface and shallower taper make it suitable for transmitting heavy loads and for applications requiring high concentricity. Standard bore diameters range from 400 to 600 mm, outside diameters from 495 to 710 mm, and lengths from 158 to 190 mm. Custom specifications are available on request. The mating bore and shaft are manufactured to standard H7/H8 tolerances. This product is widely used for shaft–hub connections in mechanical power transmission and can replace comparable imported products.

FL-C Series Flange-Mounted Single-Taper Locking Assembly

FL-C Series Flange-Mounted Single-Taper Locking Assembly

The FL-C Series Flange-Mounted Single-Taper Locking Assembly is designed for applications involving high torque and axial loads. Made of 45# steel, it has a polished surface finish; nickel plating, zinc plating, phosphating, and other surface treatments are available on request. The bore and shaft are machined to standard H7/H8 tolerances, and custom specifications are available. Model specifications are expressed as bore diameter × outer diameter. Standard bore diameters range from 14 to 50 mm, with common outer diameters of 55 mm and 80 mm; length varies by size. This page provides detailed dimensions for models with bore diameters of 38–50 mm, an outer diameter of 80 mm, and an overall length of 65 mm, including axial force, torque, and locking screw specifications.

FL-D Flange Single-Taper Locking Assembly

FL-D Flange Single-Taper Locking Assembly

The FL-D series flange single-taper locking assembly is made of 45# steel and features a smooth surface finish. Optional finishes include black oxide, nickel plating, zinc plating, and phosphating. Design features: Long power transmission distance; multiple units can be installed in series. Once tightened, the assembly fits closely for high precision and resists loosening. It protects machine components and helps reduce mechanical failures. High-quality materials provide excellent strength for stable, reliable connections. Specifications: Bore diameter range: 20–370 mm; outside diameter range: 47–545 mm; overall length range: 41–121 mm; flange outside diameter range: 56–554 mm. Suitable for connecting shafts and hubs and transmitting torque and axial force, it is widely used in mechanical drive systems.

FL-T Series Locking Assemblies

FL-T Series Locking Assemblies

The FL-T locking assembly features a thin-wall tapered sleeve design, offering high positioning accuracy and a simple split-sleeve structure. Its movable ring helps protect the exposed inner surface from environmental corrosion, extending service life and reducing maintenance costs. It is made of 45# steel, with surface finishes available including smooth, blackened, nickel-plated, zinc-plated, and phosphated. The bore diameter ranges from 50 to 150 mm, the outer diameter from 65 to 185 mm, and the length from 50 to 90 mm. It transmits torque from 117 to 25,485 N·m, with contact pressure of 68–124 N/mm². Applications include heavy machinery, wind power generation, packaging machinery, printing machinery, CNC machine tools, and automation equipment. For installation, an H7/H8 tolerance fit is recommended between the bore and shaft.

FL-L Flanged Single-Taper Locking Assembly

FL-L Flanged Single-Taper Locking Assembly

The FL-L series flanged single-taper locking assembly is made of 45 steel and has a smooth surface finish. It transmits torque through friction, with no wear during operation for a long service life. It provides overload protection by disengaging under excessive loads to protect equipment. Its versatile design allows multiple units to be connected in series as needed for installation. An H7/H8 tolerance fit is recommended between the bore and shaft. For example, FL-L 19×47 indicates a 19 mm bore and a 47 mm outside diameter. The table lists larger sizes, including bore diameters of 85–180 mm and outside diameters of 125–235 mm. Custom sizes are also available.