product — Page 42

Timing Belt Mechanical Stop System

Timing Belt Mechanical Stop System

The timing belt mechanical stop system is designed for mounting cleats that cannot be welded onto polyurethane timing belts. It features galvanized or stainless steel stops with self-centering positioning, offering greater precision and load capacity than welded profiles while eliminating misalignment. The stops are flexible and can be repositioned, and they provide an economical solution since individual stops can be replaced as needed. Available pitches include AT10, ATK10, AT20, and H. Typical applications include ATN 10, ATN 12.7, and ATN 20.

TPU V-Belt Series

TPU V-Belt Series

The TPU V-belt series is made from high-quality thermoplastic polyurethane and offers excellent flex fatigue and abrasion resistance, as well as easy splicing. Available in A, B, C, D, M, and Z profiles, the belts range from 8 mm to 32 mm wide and 4 mm to 20 mm high, with a 3.5 mm pattern height (the M profile is smooth). Nylon or steel tensile cords can be added for reinforcement. The operating temperature range is -35°C to 80°C, and hardness ranges from Shore A 80 to 98. These belts are widely used in the textile, packaging, printing, machinery, electronics, glass, chemical, and ceramic industries, and perform especially well on conveyor lines such as glazing and polishing lines in the ceramics industry. They are easy to splice by heat welding and convenient to install and maintain.

TPU Round Belt Series

TPU Round Belt Series

The TPU Round Belt Series is made from high-quality thermoplastic polyurethane and is easy to heat-weld and join. It offers excellent flex resistance, abrasion resistance, and strength. The surface has a consistent texture and a smooth, glossy finish. Belts can be heat-welded to form joints and are easy to clean. Nylon or steel cords can be added for reinforcement. Operating temperature range: -35°C to 80°C; hardness: Shore A 80 to 98. Round belts are available in diameters from 2 mm to 20 mm. Belts with diameters of 8 mm and above can be reinforced with polyester cord or steel wire. Smooth belts have a fine surface finish, while rough belts have evenly distributed surface texture. They are widely used in the textile, packaging, printing, machinery, electronics, glass, chemical, and ceramics industries.

Rubber Timing Belt

Rubber Timing Belt

Rubber timing belts offer excellent dynamic flexibility, resistance to cracking, and ozone resistance, as well as resistance to aging, heat, oil, and wear. Chloroprene rubber timing belts are widely used in machinery for the textile, automotive, synthetic fiber, tobacco, paper, printing, and chemical industries. A timing belt drive consists of a closed-loop belt with evenly spaced teeth on its inner surface and matching pulleys. The belt teeth mesh with the pulley grooves to transmit motion and power. This positive-drive system combines the advantages of gear, chain, and flat-belt drives. Timing belt drives provide an accurate transmission ratio without slippage, maintain a constant speed ratio, enable precise transmission, run smoothly, absorb vibration, and operate quietly.

Timing belt pulley

Timing belt pulley

Timing belt pulleys are used to secure the ends of belts in linear drive systems. Their profile matches the belt, ensuring even clamping force. They typically need to clamp at least 8 teeth (12 teeth are recommended for HPL belt cores). Available materials include aluminum alloy (clear anodized) and S45C steel (black oxide or zinc plated). Pitch types include MXL, XXL, XL, L, H, XH, XXH, T series, AT series, 3M/5M/8M/14M/20M, S series, and RPP series. Bore sizes use nominal N-series designations (N8 to N50), with keyway and stepped-bore options available. Timing belt pulleys are supplied as semi-finished parts for easy customization.

Clamping plate

Clamping plate

Clamping plates provide an effective way to secure the ends of drive belts in many linear drive systems. They must be shaped to match the belt profile, provide even clamping force across all belt clamping surfaces, and be rigid. For standard applications, at least 8 teeth must be clamped. If the timing belt has an HPL tension member, clamping at least 12 teeth is recommended. Clamping plates are supplied as semi-finished products. Aluminum is the standard material used to make them.

PU Open-Ended/Spliced Belts

PU Open-Ended/Spliced Belts

Polyurethane open-ended/spliced belts are made from polyurethane and available in H pitch (1/2 in, 12.7 mm) and L pitch (3/8 in, 9.525 mm). Belt body colors are available in white or black, with steel or Kevlar tensile cords. The maximum width is 150 mm for H pitch and 100 mm for L pitch; the standard length is 100 m. Length tolerance: ±0.5 mm/m; thickness tolerance: ±0.2 mm. Optional features include fabric on the toothed side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), and a coating. Suitable for linear drives, conveying, positioning, and other applications, the open-ended design makes on-site splicing or welding into an endless loop easy.

Polyurethane Open-Ended/Jointed Belts

Polyurethane Open-Ended/Jointed Belts

Polyurethane Open-Ended/Jointed Belts are made from polyurethane and offer excellent abrasion, oil and aging resistance. The range includes various tooth pitches, such as HD 3M, HD 5M, HTD 8M and HTD 14M, to suit different drive requirements. Belts are available in white or black, with steel or Kevlar tensile cords. The standard length is 100 m. Maximum widths are 150 mm for the HD series and 300 mm for the HTD series. Length tolerance is ±0.5 mm/m; thickness tolerance is ±0.2 mm for the HD series and ±0.4 mm for HTD 14M. Optional features include fabric on the tooth side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), a covering, double-sided teeth and an integrated guide, offering flexibility for custom applications.

RPP/ATN Series Open-Ended Polyurethane Timing Belts

RPP/ATN Series Open-Ended Polyurethane Timing Belts

This series of open-ended polyurethane timing belts (spliceable belts) includes models such as RPP5M, RPP8M, RPP14M, and ATN20. Suitable for linear drives, conveyor lines, packaging machinery, and other applications requiring open-ended timing belts, they can be cut to the required length on site and spliced into a closed loop. Made of polyurethane, they offer excellent wear and oil resistance, along with high tensile strength. Available in white and black, with steel or Kevlar tensile cords to meet different strength requirements. Length tolerance: ±0.5 mm/m. Thickness tolerance: ±0.2 mm or ±0.4 mm, depending on the model. Maximum widths range from 100 to 150 mm; standard length is 100 m. Optional features include fabric covering on the toothed side (NFT), fabric covering on the back (NFB), fabric covering on both sides (NFT+NFB), and a coating (Covering) to suit different friction requirements and pulley materials. RPP5M has a 5 mm pitch, RPP8M an 8 mm pitch, and RPP14M a 14 mm pitch. ATN20 offers higher load capacity; refer to the catalog for its specific pitch specifications.

SLF Series Ball Splines

SLF Series Ball Splines

TBI MOTION SLF Series round-flange ball splines feature a unique 40° contact angle design, providing high sensitivity and high load capacity. They are suitable for environments involving vibration and shock loads, high positioning accuracy, and high-speed motion. The round-flange spline nut is secured with bolts for easy installation and helps prevent rotational backlash. Shaft diameters range from 6 to 50 mm, with contact paths for 2 rows of balls (180°) or 4 rows (70°). Standard solid and hollow shaft options are available. Accuracy grades include Normal (N), High (H), and Precision (P). The part number includes the series, shaft diameter, number of ball rows, flange type, and surface treatment. The rated dynamic load ranges from 137 to 4086 kgf, and the static load from 225 to 5615 kgf. Suitable for cantilever loads and applications involving moment loads.

Polyurethane Open-Ended/Jointed Belts (RPP/ATN Series)

Polyurethane Open-Ended/Jointed Belts (RPP/ATN Series)

This series of polyurethane open-ended/jointed belts is designed for linear motion drives, material conveying, and similar applications. Made from polyurethane, the belts can be reinforced with steel or Kevlar tensile cords and offer excellent wear resistance, tensile strength, and oil resistance. The range includes models such as RPP5M, RPP8M, RPP14M, and ATN20, with pitches from 5 mm to 14 mm (the ATN20 pitch is not specified). Maximum width is up to 150 mm, standard length is 100 m, length tolerance is ±0.5 mm/m, and thickness tolerance is ±0.2 mm to ±0.4 mm. Available in white or black, the belts can also be supplied with fabric on the tooth side (NFT), fabric on the back (NFB), fabric on both sides (NFT+NFB), or a coating.

AT Series Polyurethane Open-Ended Belt

AT Series Polyurethane Open-Ended Belt

The AT Series polyurethane open-ended belt (also suitable for splicing) is designed for synchronous drive and linear conveying applications. Made from polyurethane (PU), it is available in two standard pitches: AT10 and AT20. The belt has a length tolerance of ±0.5 mm/m and a thickness tolerance of ±0.4 mm. Available in white or black, it can be supplied with steel or Kevlar cords. The maximum width is 150 mm, and the standard length is 100 m. Optional features include fabric on the tooth side, fabric on the back, fabric on both sides, a rubber coating, and an integral guide, to meet different requirements for wear resistance, noise reduction, guidance, and installation.

Polyurethane Flat Belts (PU Flat Belts)

Polyurethane Flat Belts (PU Flat Belts)

PU flat belts are flat drive belts made primarily of polyurethane and reinforced with embedded steel cords. Designed for lifting, power transmission and conveying applications that do not require synchronization, they can run on small-diameter pulleys for a compact drive layout. They offer low inertia, maintenance-free operation, long service life and low noise. An integral guide strip can be added for specialized conveying needs. Belt thickness can be customized to suit different operating conditions. This product range is widely used in light-duty drive and material-handling equipment in the packaging, printing, textile and woodworking industries.

Seamless TPU Timing Belt

Seamless TPU Timing Belt

Seamless TPU timing belts are made with a continuous helical high-strength steel cord and highly abrasion-resistant, high-tensile-strength TPU polyurethane. They are ideal for high-power drives and heavy-load conveying applications. Optional nylon fabric coatings are available on the tooth side (NFT), the back side (NFB), or both sides (NFT-NFB), helping improve running performance and reduce friction noise. An additional coating of a specified thickness can also be applied to the belt back for wear protection. These belts offer dimensional stability, low noise, low maintenance, high abrasion resistance, and resistance to aging, hydrolysis and ozone, as well as excellent oil resistance. Effective lengths range from 600 mm to 25,000 mm, making them suitable for a wide range of industrial drive and conveying applications.

PU Timing Belt Cleats

PU Timing Belt Cleats

This range of cleats is designed for PU timing belts. Cleats in various shapes can be fitted to the back of the belt to guide, stop, and position materials during conveying. Cleats can be custom-made to customer specifications, including shape and dimensions. Made of polyurethane (PU), they are either molded integrally with the timing belt or heat-welded to it for a strong, flexible bond. They are wear-resistant, oil-resistant, and weather-resistant. These products are widely used in automation equipment, packaging machinery, food conveying, and logistics systems.

Rubber Timing Belts

Rubber Timing Belts

This series of rubber timing belts features two tooth profiles: T-type (trapezoidal) and curvilinear (HTD). The T-type range includes seven models: MXL, XXL, XL, L, H, XH, and XXH, with pitches from 2.032 mm to 31.75 mm, tooth heights of 0.51–8.53 mm, belt thicknesses of 1.14–13.20 mm, and a tooth angle of 40°. The curvilinear range includes six models: HTD 2M, 3M, 5M, 8M, 14M, and 20M, with pitches from 2 mm to 20 mm, tooth heights of 0.75–8.53 mm, belt thicknesses of 1.36–13.20 mm, and a tooth angle of 40°. Made from rubber, these belts offer wear resistance, oil resistance, and tensile strength. They are suitable for a variety of drive systems, including machine tools, packaging machinery, and automation equipment. Tensile strength ranges from 80 N/mm to 520 N/mm, depending on the model.

Cleated Sidewall Conveyor Belt Series

Cleated Sidewall Conveyor Belt Series

This series is a range of cleated sidewall conveyor belts from Dingying Industrial Belts. Designed for light industrial applications, these belts are suitable for inclined and horizontal conveying, as well as production lines where spillage must be prevented. Sidewalls along both edges and cleats across the belt increase its carrying capacity and keep materials from falling off the sides. They are commonly used in automated packaging, food processing, electronics, and logistics sorting equipment. Available colors include white PU, blue, and green. The white PU surface is easy to clean, making it suitable for food processing and other industries with stringent hygiene requirements; blue and green are standard industrial colors. Optional tracking guides can be added to help reduce belt misalignment during operation. Belt width and circumference, cleat height, sidewall height, guide profile, and other specifications are customized to suit your requirements and confirmed by the manufacturer.

Conveyor Belt with Tracking Guides

Conveyor Belt with Tracking Guides

This series features conveyor belts with cleats and sidewalls, available in white PU, blue, green, and other colors. Optional tracking guides help prevent materials from shifting during conveying. Suitable for automated production lines, material handling, packaging, and other applications. Specific dimensions, strength, and installation parameters require confirmation.

SLT Series Cylindrical Ball Splines

SLT Series Cylindrical Ball Splines

The SLT series of cylindrical ball splines from TBI MOTION features a straight outer sleeve design that minimizes installation space. Balls housed in the spline shaft’s outer sleeve roll smoothly along precision-ground raceways to transmit torque. With a 40° contact angle, these splines offer high responsiveness, load capacity, and durability. They are suitable for applications involving vibration and shock, high positioning accuracy, and high-speed motion. Available with shaft diameters of 6–50 mm and 2- or 4-row ball designs, they offer several surface treatments, including standard, black oxide, and nickel plating. Basic dynamic load ratings range from 137 to 4086 kgf, static load ratings from 225 to 5615 kgf, and rated torque from 0.46 to 179.89 kgf·m. Compatible with solid or hollow spline shafts.

Dingying Industrial Belt Timing Pulleys

Dingying Industrial Belt Timing Pulleys

This series of timing pulleys is designed for use with Dingying industrial belts. The page mainly lists parameter options related to materials and surface finishes. Available materials include aluminum (Aluminium/AL), steel (Steel/ST), and polyacetal (Derrin/PDM). Aluminum and polyacetal are suitable for medium-power applications and are lightweight, with low rotational inertia. Both are standard-material stock pulleys suitable for wear-resistant applications. Steel is suitable for high-power applications; it is durable and wear-resistant, and is also a standard-material stock pulley suitable for wear-resistant applications. Products can be used in woodworking, steel processing, logistics, meat processing, food production, fiber-optic cable, packaging machinery, steel, paper and printing, tobacco processing machinery, glass processing, and other industries. The page also contains numerous “surface finish” entries, but does not provide detailed specifications such as tooth profile, pitch, or tooth count. Confirm the specific model when selecting a product.

Power Line Filters

Power Line Filters

This series of power line filters consists of passive components (L, R, and C) and includes common-mode and differential-mode attenuation networks to suppress electromagnetic interference on power lines. The products comply with a range of international standards, including IEC 939-1, IEC 939-2, EN 133000, EN 133200, UL 1283, CSA C22.2 No. 8, GB/T 15287, GB/T 15288, and VDE 0565-3. The model designation consists of five fields: field 1, rated current (Arabic numerals); field 2, application and mounting type (letters); field 3, mounting orientation (Arabic numerals); field 4, circuit (Arabic numerals); and field 5, connection type (Arabic numerals). Available applications and mounting types include AC, DC, three-phase four-wire, multistage filtering, differential-mode inductors, lead wires, socket type, PCB mounting, cylindrical type, and feedthrough type. Connection options include quick-connect tabs, bolts, lead wires, Phoenix terminals, terminal blocks, European-style terminals, and busbars. Customization and OEM services are available.

D Series Twin-Lock

D Series Twin-Lock

This page is a typical Twin-Lock drawings and dimensions page for the D Series in the catalog. The page title gives only the series name. Most of the page is taken up by numerous drawing numbers (Figures 1–811 and beyond), along with corresponding outline drawings, dimension annotations, and parameter tables. However, this extraction did not capture any valid model strings, dimension values, or coding rules. Therefore, the only details currently confirmed are that the series is called the D Series and is related to Twin-Lock products (locking components). For detailed specifications, please consult subsequent pages or the original drawings.

DX Series Power Line Filters

DX Series Power Line Filters

DX Series power line filters are suitable for a wide range of electronic equipment and electronic measuring instruments. They are easy to install and highly versatile. The rated operating voltage is 250 VAC, the operating frequency is 50/60 Hz, and the rated current ranges from 1 A to 20 A. Available ratings include 1 A, 3 A, 6 A, 10 A, and 20 A. Capacitance to ground is 2.2 nF or 3.3 nF, leakage current is 0.5 mA, and discharge resistance options range from 1 MΩ to 3 MΩ. The dielectric strength test meets the requirements of 1500 VDC (line-to-line) for one minute and 1500 VAC (line-to-ground) for one minute. The climatic category is 25/085/21. DL Series models are available with different terminal configurations and circuit diagrams, and their dimensions vary by specification.

DL Series Filters

DL Series Filters

The DL Series comprises general-purpose filters designed for a wide range of electronic equipment and electronic measuring instruments. They are suitable for general applications and easy to install. The series includes two subseries: DH1 and K. DH1 models include DL-200DH1/10, DL-300DH1/10, DL-450DH1/60, DL-600DH1/60, DL-750DH1/60, and DL-1000DH1/60, with rated currents ranging from 200 A to 1,000 A, ground capacitance of 44 nF or 220 nF, leakage current of 10 mA or 20 mA, and a discharge resistance of 0.68 MΩ for all models. K subseries models include DL-3K1, DL-6K1, DL-10K1, DL-20K3, DL-30K3, and DL-50K3, with rated currents ranging from 3 A to 50 A, leakage current of 1.5 mA, and discharge resistance of 1.5 MΩ. These products are suitable for power-line filtering and effectively suppress electromagnetic interference. They are widely used at the power inputs of electronic equipment, measuring instruments, and various industrial control devices.

K-Series AC Power Line Filters

K-Series AC Power Line Filters

K-Series AC power line filters (EMI filters) suppress conducted electromagnetic interference on AC power lines. They are designed for use at the power inputs of factory automation equipment, CNC systems, instrumentation, and electronic devices. Insertion loss is evaluated using a 50 Ω measurement system, with test methods following IEC/CISPR Publication No. 17. Expressed in dB, insertion loss indicates how effectively the filter attenuates interference signals across different frequencies and is an important measure of its electromagnetic compatibility performance. The series is designated K and includes models such as 3K1. Different current ratings and form factors allow the filters to accommodate equipment with varying power requirements. Easy to install and highly reliable, these filters effectively reduce conducted emissions from equipment and improve system immunity to interference, making them a key component for helping automation systems meet EMC requirements.

F Series Terminal Blocks

F Series Terminal Blocks

F Series terminal blocks are control components for electrical connections, offering a choice of terminal configurations. The products have clearly specified rated current ratings and pass a one-minute withstand voltage test to ensure safe use. They also have a defined climatic category, making them suitable for environments with varying temperatures and humidity levels. The series is widely used in industrial control systems, distribution cabinets, and other applications where reliable wiring is required.

DL Series Power Line Filters

DL Series Power Line Filters

The DL Series power line filters suppress electromagnetic interference and help ensure the electromagnetic compatibility of equipment. Models include DL-10FK1, DL-20FK1, DL-30FK1, DL-50FK1, and DL-60FK1, covering multiple current ratings for applications with different power requirements. The filters feature safety circuit elements such as a grounding capacitor and discharge resistor, with low leakage current to improve power quality. Various terminal options are available, along with circuit diagrams and dimensional drawings for easy selection and installation. For detailed electrical specifications and mounting dimensions, see the catalog. These filters are widely used in industrial control, power electronics, communications equipment, and other fields.

DZ Series IEC Filters

DZ Series IEC Filters

DZ Series IEC filters are integrated filters with standard IEC sockets. They feature a standard IEC input socket with built-in filtering, offering excellent value for money. Suitable for small electronic devices and electronic measuring instruments. Rated voltage: 250 VAC; operating frequency: 50/60 Hz; rated current range: 3–15 A. Available in four specifications—DL-3DZ2, DL-6DZ2, DL-10DZ2, and DL-15DZ2—with current ratings of 3 A, 6 A, 10 A, and 15 A, respectively. Dielectric strength test: 1500 VDC (line-to-line) / 1500 VAC (line-to-ground) for one minute. Climate category: 25/085/21.

SOF Series Flange-Type Ball Spline

SOF Series Flange-Type Ball Spline

The TBI MOTION SOF Series flange-type ball spline uses a flange and bolts to secure the outer cylinder to a support base. Its simple assembly makes it ideal for mounting on a support base. Its unique contact-point design provides a larger contact angle (40°), significantly increasing load capacity. It is suitable for applications involving heavy vibration and impact loads, high positioning accuracy requirements, and high-speed motion. Shaft diameters range from 8 to 25 mm, with hollow-shaft options available. Basic dynamic load ratings range from 121 kgf to 1,142 kgf, and rated torque ranges from 0.56 kgf·m to 14.17 kgf·m.

DL Series IEC Power Line Filters

DL Series IEC Power Line Filters

The DL Series IEC power line filters feature a compact design with an IEC-standard inlet, making them suitable for small electronic devices and electronic measuring instruments while saving installation space. They use terminal connections and are available with rated currents of 3 A, 6 A, or 10 A. The ground capacitance is 2.2 nF, the leakage current is no more than 0.5 mA, and the discharge resistor is 1 MΩ. In the model designation, R indicates a single or double fuse, K indicates a switch, and KR indicates both a switch and a fuse, meeting different circuit protection and power control requirements. Compliant with the IEC-standard inlet interface, the series is compact and easy to install, and is commonly used in small electronic devices with EMI/EMC requirements.

DL Series Power Line Filters

DL Series Power Line Filters

The DL Series power line filters are compact EMI filters designed for through-hole PCB mounting, suitable for the AC or DC side of power modules and small electronic instruments. Their compact size allows them to be soldered directly onto a PCB, saving installation space. The series includes three models: DL-1PC, DL-3PC, and DL-6PC, with rated currents of 1 A, 3 A, and 6 A, respectively. Ground capacitance is 2.2 nF or 3.3 nF, leakage current is 0.5 mA, and the discharge resistor is 1 MΩ. The filter circuit suppresses both common-mode and differential-mode interference, effectively reducing conducted noise and helping ensure equipment electromagnetic compatibility.

DL Series DC Filters

DL Series DC Filters

DL Series DC filters are designed for the DC side of modular power supplies and small electronic instruments. They feature compact, pin-through-hole PCB mounting, with FPQ Series connector-equipped models available as an option. The rated voltage is 250 VDC, and the rated current range is 2–10 A. The dielectric withstand test voltage is 500 VDC (line to ground, 1 minute), and the climatic category is 25/085/21. The series includes four models—DL-2FPC, DL-3FPC, DL-6FPC, and DL-10FPC—with rated currents of 2 A, 3 A, 6 A, and 10 A, respectively. Each model has different ground capacitance, leakage current, and discharge resistance specifications. Refer to the circuit diagram and dimensional drawing when planning installation.

FPQ Series with Connector

FPQ Series with Connector

The FPQ Series with Connector is a compact, pin-type PCB-mount connector designed for the DC side of modular power supplies and small electronic instruments. It has a rated voltage of 250 VDC, a rated current range of 2–10 A, a one-minute dielectric withstand voltage of 500 VDC (line-to-ground), and a climatic category of 25/085/21. The series includes models DL-2FPC, DL-3FPC, DL-6FPC, and DL-10FPC, with rated currents of 2 A, 3 A, 6 A, and 10 A, respectively. Different specifications are available for ground capacitance (2.2 nF, 33 nF, and 22 nF), leakage current (1 mA and 2 mA), and discharge resistance (1 MΩ and 2 MΩ) to suit different power levels and applications. Its compact design makes it suitable for space-constrained automation equipment, and the pin-type PCB mounting facilitates high-volume assembly.

DTC and FTC Series EMI Filters

DTC and FTC Series EMI Filters

This series of split-type EMI power filters is designed for automated production lines and comprises the DTC and FTC subseries. Model numbers begin with DL-, such as DL-25DTC3 and DL-16FTC2. Rated voltages range from 80 VDC to 700 VDC and include 250 VAC; rated currents range from 16 A to 400 A, and dielectric withstand test voltages range from 500 VDC to 2700 VDC. The filters incorporate various capacitance combinations and are suitable for suppressing electromagnetic interference in industrial automation equipment, power systems, and other applications. They feature a compact design, low insertion loss, and easy installation. Available in a range of dimensions, they weigh between 40 g and 900 g. The DTC and FTC series have different circuit topologies and filtering characteristics to meet the needs of various applications.

EA and EAX Series Three-Phase EMI Power Line Filters

EA and EAX Series Three-Phase EMI Power Line Filters

This series of three-phase EMI power line filters is suitable for balanced and unbalanced three-phase loads, effectively suppressing industrial radio-frequency interference conducted along power lines. Compact and versatile, the filters are rated at 440/250 VAC and operate at 50/60 Hz, with rated currents ranging from 5 A to 600 A. They offer high dielectric strength (1,500 VDC line-to-line and 2,250 VDC line-to-ground for 1 minute) and a climatic category of 25/085/21. Models range from DL-5EA to DL-600EA5/60, with ground capacitance from 6.8 nF to 690 nF and discharge resistance from 0.44 MΩ to 1 MΩ. These filters are suitable for suppressing electromagnetic interference at the power inputs of industrial equipment and power electronics devices.

EAK Series High-Performance Power Line Filters

EAK Series High-Performance Power Line Filters

The EAK series high-performance power line filters offer excellent attenuation at low frequencies and effectively suppress both common-mode and differential-mode interference. With high current capacity and rated currents ranging from 50 to 1,000 A, they are suitable for applications requiring clean power, such as data processing systems, telecommunications systems, medical equipment, and industrial control devices. The filters are rated for 440/250 VAC and operate at 50/60 Hz. They withstand dielectric test voltages of up to 1,500 VDC (line-to-line) and 2,250 VDC (line-to-ground), and have a climatic category of 40/085/21. Models are available for different rated currents: 50EAK1, 80EAK1, 100EAK1, 150EAK1, 300EAK3, 400EAK3, 600EAK3, 800EAK3, and 1000EAK5. Each model has different grounding capacitance and discharge resistance specifications to support applications at various power levels.

EB and EBX Series Power Line Filters

EB and EBX Series Power Line Filters

The EB and EBX series power line filters suppress interference on 50/60 Hz AC power lines, including industrial radio-frequency interference conducted along power cables. They comply with IEC/CISPR No. 17 (50 Ω measurement system). Compact and easy to install, they are rated for 440/250 VAC and currents from 5 A to 200 A. The one-minute dielectric strength test is 1,500 VDC line-to-line / 2,250 VDC line-to-ground. Climate category: 25/085/21. Models include DL-5EB, DL-10EB, DL-5EBX1, DL-10EBX1, DL-20EB3, DL-30EB3, DL-40EB3, DL-50EB3, DL-100EB1, DL-150EB1, and DL-200EB11. With ground capacitances of 6.8 nF or 50 nF and discharge resistances of 1 MΩ, 2 MΩ, or 0.44 MΩ, the series meets electromagnetic compatibility requirements across a range of power levels.

DL Series Three-Phase Power Line Filters

DL Series Three-Phase Power Line Filters

DL Series three-phase power line filters are available with rated currents from 7 to 100 A. They are designed for power filtering in environments with severe interference, such as those involving inverter equipment. The filters provide excellent attenuation across the 150 kHz to 30 MHz frequency range. Their convenient terminal-block connections, compact design, small size, and light weight make them easy to install. The series includes models such as DL-7EB15/50, DL-10EB15/50, DL-16EB15/50, DL-30EB15/50, DL-42EB15/50, DL-55EB15/50, and DL-75EB15/50. Ground capacitance: 1.75; leakage current (400 VAC/50 Hz): 33 µA; discharge resistance: 1.5/0.68 MΩ. The leakage current values shown in the table are maximum values under normal conditions. If two phases are missing, leakage current may reach 6–8 times this value.

SOT Series Ball Splines

SOT Series Ball Splines

The TBI MOTION SOT Series is a cylindrical-type ball spline featuring a two-row ball design with a 180° contact angle. It is available in shaft diameters from 8 to 25 mm, with outer sleeve lengths from 25 to 60 mm. Offering high responsiveness and high load capacity, its rated load is ten times that of a linear bushing, making it suitable for applications involving vibration and impact, high positioning accuracy, and high-speed motion. Six nominal models are available, from SOT008 to SOT025, with basic dynamic load ratings of 121–1,142 kgf and basic torque ratings of 0.56–14.17 kgf·m.

EBK Series Power Line Filters

EBK Series Power Line Filters

EBK series filters are electromagnetic compatibility (EMC) filters for power supplies in industrial control equipment, particularly suitable for inverter-based devices, such as the input side of variable-frequency drives. They offer a wide range of current ratings and moderate leakage current, balancing filtering performance and safety. The series includes common models such as 100EBK1, 150EBK1, and 200EBK1, as well as models with technical data such as DL-5EBK5. When selecting a model, consider parameters including rated current, capacitance to ground, discharge resistance, terminal type, and overall dimensions. Refer to the technical data table for specific values under Rated Current, Capacitance to Ground, Discharge Resistance, and Circuit Diagram/Dimensions.

DL Series Inverter Output Filter

DL Series Inverter Output Filter

DL Series inverter output filters are installed on the output side of an inverter. They suppress dv/dt, limit overvoltage, and reduce electromagnetic interference, effectively protecting motor insulation and minimizing interference with nearby equipment. Available in a range of ratings from 5 A to 600 A, they suit inverter drive systems of various power levels. The filters use input/output terminals and feature a built-in grounding capacitor and discharge resistor for easy wiring and reliable operation. They are widely used in industrial automation equipment, motor drives, pumps, fans, and other applications.

Power Line Filter

Power Line Filter

This series of general-purpose power line filters is designed for noise-sensitive applications requiring high filtering performance, including power electronics, consumer electronics, household appliances, building automation, industrial machinery, medical equipment, electronic data processing equipment, office automation, and communications equipment. Rated current ranges from 1 to 30 A, with a rated voltage of 250 VAC and support for 50/60 Hz and DC to 400 Hz. The filters provide high common-mode and differential-mode attenuation. Safety (S-type) and medical (N-type) versions are available to meet different application requirements. Products are certified to UL 1283 and EN 60939 and comply with RoHS and CE requirements. The operating temperature range is -25°C to +100°C (25/100/21); withstand voltage is 1100 VDC between L and N, and 2250 VDC between L/N and PE. Temperature derating curves are provided to help users select a suitable model for the ambient temperature.

SL Series

SL Series

TBI MOTION SL Series ball splines are available in matched types (SLF/SLT) and single-nut types. Spline shaft nominal diameters range from 6 to 50 mm, with solid or hollow options and T2/T4 ball rows. Flange type N can be specified or omitted. Spline shaft lengths are customizable, with preload grades PO/P1/P2, one or more spline nuts, and a variety of surface treatments available. With high precision and rigidity, they are suitable for linear motion applications in automation equipment, industrial machinery, and more.

ADSM Ball Screw Series

ADSM Ball Screw Series

The ADSM Ball Screw Series is a product line from Andy Electromechanical, offering a range of nut and flange combinations. Nut types include A (high-speed, reinforced dustproof), NU/U (reinforced dustproof), NI/I (reinforced dustproof), V (heavy-load, external-return type), and Y/YA (high Dm-N value). Matching flange types include SFA (DIN), SFNU/SFU (DIN), SFNI/SFI, SFV, and SFY/SFYA. Specifications are grouped by shaft diameter, with two ranges: d ≤ 32 and d ≥ 40. Some flanges comply with DIN standards. The series suits applications with varying load, speed, and dust-protection requirements, as well as those requiring high Dm-N values. It can be used for precision transmission and positioning in CNC machinery, automation equipment, and more.

ADSM Series Nuts

ADSM Series Nuts

The ADSM Series nuts from Andi Electromechanical are drive nuts designed for automation equipment, available in a variety of nut and flange styles. The XSY is a miniature type and can be used with an XSY flange or without a flange. The CNI/standard type is available with an SCNI or SCI flange, or without a flange. The K type is miniature, uses an SFK flange, and is available in specific configurations such as SFK 01004, SFK 02002, and SFK 02502. The XSV is designed specifically for automation equipment and has no flange. The series offers a range of options to suit equipment space constraints, loads, and mounting methods, making it suitable for automation applications such as linear transmission and precision positioning.

SFA Series Ball Screw Nuts

SFA Series Ball Screw Nuts

The SFA series ball screw nut is a flanged ball nut and a core component of ball screw drive systems. It is widely used in machine tools, automation equipment, semiconductor equipment, and other applications requiring precise linear motion. The series features a recirculating ball design, offering high rigidity, high load capacity, high transmission efficiency, and long service life. Model numbers begin with SFA, followed by a numeric code for the shaft diameter and lead. For example, SFA1205 indicates a 12 mm shaft diameter and a 5 mm lead. Suffixes such as -2.8 and -3.8 distinguish different numbers of ball circuits or specification variants. The range includes a variety of shaft diameter and lead combinations, from SFA1205 to SFA4050, to meet different load and travel requirements. The dimensional specification table lists the shaft diameter, lead, ball diameter, nut dimensions, rated dynamic and static loads, and rigidity values for each model to help users select and design for installation.

SFNU/SFU Series Ball Screws

SFNU/SFU Series Ball Screws

SFNU/SFU series ball screws are transmission components for factory automation, suitable for precision positioning and feed drives in CNC machine tools, robotic arms, and automated equipment. The catalog offers multiple metric specifications, with shaft diameters from 12–100 mm, leads from 4–20 mm, ball diameters from 2.381–9.525 mm, and nut sizes from 24–150 mm. Dynamic load ratings range from 40–202 kgf, static load ratings from 10–30 kgf, and rigidity from 40–180 kgf/μm. Models marked with an asterisk in the catalog (footnote symbol: ☆) can be manufactured with left-hand threads. Some model numbers and parameter entries in the table appear inconsistent; please confirm details with the manufacturer when placing an order.

SFNI/SFI Series Ball Screws

SFNI/SFI Series Ball Screws

This ball screw series includes the SFNI and SFI subseries. The catalog lists specifications and dimensions for each model, including shaft diameter (16–80 mm), lead (4/5/10 mm), ball diameter (2.381/3.175/6.35 mm), nut dimensions, dynamic and static load ratings, and rigidity values. The SFNI series covers sizes 016–100, while the SFI series covers sizes 016–032. These products are suitable for precision drive applications that convert rotary motion into linear motion. Select the appropriate length, accuracy grade, and mounting method based on the catalog.