product — Page 52

LZ Series Oldham Couplings

LZ Series Oldham Couplings

LZ series Oldham couplings feature an integrated cross-slide design that connects two shafts while compensating for radial and angular misalignment. They are suitable for high-speed drives requiring a degree of offset compensation and are commonly used to connect stepper or servo motors to lead screws and linear slides. Models are classified by bore diameter, outside diameter D16~D63, and length L18~L71. Specifications include maximum bore diameters of 6.35~32mm, rated torque of 1~34N·m, maximum torque of 2~68N·m, maximum speed of 4500~13000rpm, allowable offset of 1~3.5mm, allowable angular misalignment of 1.5°, weight of 12~450g, and screw tightening torque of 3~5N·m. The couplings are compact, provide smooth power transmission, and require no maintenance.

L Series Rigid Couplings

L Series Rigid Couplings

L Series rigid couplings feature a one-piece design with high torque capacity and rigidity. They are suitable for applications requiring precise torque transmission and minimal torsional backlash, including XY-axis stages, indexing tables, machine tools, injection molding machines, material handling equipment, and dispensing machines. Models are available in B (clamp type) and D (set-screw type) configurations, with a choice of bore diameters at the D1 and D2 ends. The series is suitable for connecting servo motors to drive components such as ball screws and timing belt pulleys, and is secured by clamps or set screws during installation.

LL-D Series Couplings

LL-D Series Couplings

The LL-D series consists of compact set-screw couplings designed for flexible connection and torque transmission between two shafts. They are suitable for light-duty applications involving small servo motors, stepper motors, encoders, lead screws, and similar equipment. Model codes specify the outer diameter and length; for example, LL-D-D16L16 has an outer diameter of 16mm and a length of 16mm. Common outer diameters are 16, 20, 25, and 32mm, with short and long lengths available for each diameter (16/24, 20/30, 25/35, 32/42). Each outer diameter accommodates a different bore range, from 3-8mm to 6-16mm, allowing selection to match the actual motor and driven shaft diameters. Set screw sizes increase with the outer diameter from M2.5 and M3.0 to M4.0. The distance L1 from the screw center to the end face ranges from 3~8mm, and the specified tightening torque ranges from 0.8~2.5N·m. During assembly, tighten to the applicable torque to avoid damaging the shafts and screws.

LR Series Wire-Wound Couplings

LR Series Wire-Wound Couplings

The LR series wire-wound flexible couplings are part of the C-KING coupling range and are suited to low-power transmission applications involving servo motors, stepper motors, lead screws and encoders. Six sizes are available, with outside diameters D15~D40 and lengths L20~L45. Maximum bore sizes range from 8~28 mm, rated torque from 0.5~6 N·m, maximum torque from 1~12 N·m and maximum speed from 12000~30000 rpm. Allowable eccentricity is 0.05 mm and allowable angular deviation is 0.5°. The listed models include LR-B and LR-D. The technical specifications table provides torque, speed, moment of inertia, weight and other data for quick selection.

FCL Series Flexible Pin and Bush Couplings

FCL Series Flexible Pin and Bush Couplings

FCL series flexible pin and bush couplings use pins fitted with elastic bushes. Their simple design makes installation and replacement easy. During operation, they dampen vibration from mechanical transmission and absorb shocks caused by uneven motion. They accommodate axial, radial and angular misalignment between shafts, significantly improving operating quality and stability. Allowable misalignment: radial displacement 0.2~0.6mm, angular deviation 0°30'~1°30'. They are widely used in lightly loaded, motor-driven power transmission systems of small and medium capacity, including reducers, cranes, compressors, textile machinery, pumps and gearboxes. Models range from FCL-90~FCL-400, with outer diameters of 90~400mm, pin numbers F1~F7, bores of 8~40mm, maximum speeds of 1600~4000rpm, maximum torques of 4~3550N·m and weights of 1.54~127.70kg.

MH Series Flexible Jaw Couplings

MH Series Flexible Jaw Couplings

Shenma Transmission MH series flexible jaw couplings consist of two jaw hubs and an intermediate rubber spider. They damp vibrations generated by mechanical transmission, absorb shocks caused by uneven motion, and compensate for radial and angular misalignment between shafts. They are widely used in small and medium-power drive systems for gear reducers, cranes, compressors, textile machinery, pumps and variable-speed drives. The range covers outer diameters of 55~230mm, hub lengths of 38~150mm, maximum machinable bores of 20~85mm, minimum bores of 9~50mm, overall lengths of 57~233mm, rubber spider outer diameters of 26~110mm and a rubber gap of 3mm. Maximum speeds range from 3600~6000rpm, typical torque (listed in the source as “常用距规”) from 0.4~65N·m, and individual weights from 0.6~42.0kg. The source specifies standard radial misalignment compensation of 0.2mm and angular compensation of 0.3°. Models MH-55~MH-230 are selected by outer diameter. Dynamic balance must be checked when operating near the maximum permissible speed.

Shenma S-Type Curved-Tooth Gear Coupling

Shenma S-Type Curved-Tooth Gear Coupling

The Shenma S-type curved-tooth gear coupling is a two-piece coupling made from nylon and steel. It is maintenance-free, compensates for axial, radial and angular misalignment, and is easy to assemble by axial insertion. Finished bore tolerances are ISO H7, and keyway width tolerances are JS9 in accordance with DIN6885/1. Tapered and imperial bores are also available. Models range from S14 to S65, with outer diameter D of 33~110 mm, bore diameter d of Φ8~Φ16 mm, length L of 23~55 mm, and 20~50 teeth. The series is suitable for power transmission connections in a variety of mechanical and hydraulic applications.

Shenma Nylon Internal Gear Coupling

Shenma Nylon Internal Gear Coupling

The Shenma nylon internal gear coupling features an internal gear ring that meshes with externally toothed hubs. Elastic deformation of the nylon gear ring compensates for radial, angular and axial misalignment between the two shafts. The coupling reduces vibration and noise, requires no lubrication or maintenance, and is suitable for general mechanical drives with low to medium torque. The catalog provides complete mounting dimensions by size: sizes range from 1m×32 to 3m×36, with ring diameter (B) 42~140 mm, ring length (C) 38~74 mm, step diameter (D) 26~98 mm, individual gear thickness (E) 32~56 mm, gear bore d1/d2 8~14 mm, and overall length (A) 67~117 mm. All components are available separately. Please inquire about additional in-stock items not listed in the catalog table.

L Series Couplings

L Series Couplings

L series couplings are flexible couplings designed for low- to medium-power precision drives. They are commonly used to connect servo and stepper motors to ball screws, encoders, and gearboxes, compensating for shaft misalignment and absorbing shock. The series comprises 10 sizes, from L-035 to L-150, covering precision low-torque to medium-torque applications. Key specifications include maximum torque of 0.15~30 N·m, normal torque of 0.05~10 N·m, maximum speed of 2000~6000 rpm, outside diameter D of 16.10~95.28 mm, overall length L of 20.15~112.95 mm, mounting dimensions L1 and L2, and bore diameter d of 4~46 mm. Each size is available with different bore combinations to suit various motor and screw shaft diameters. Select a model from the table based on the required transmitted torque, speed, and bore sizes, and do not exceed the maximum speed. The same page also lists CL variants with the same dimensions as the L type, slightly different moments of inertia and weights, and sizes extending to CL-225, for different stiffness and damping requirements.

Leveling caster

Leveling caster

A leveling caster combines leveling and mobility in a single caster assembly. It features a die-cast aluminum alloy housing and a reinforced nylon wheel, offering high load capacity, low noise, and an eco-friendly design. Load capacities range from 50 to 1,500 kg, with an adjustable overall height of 81–147 mm. It is available in PA (nylon) and NY (reinforced nylon). The leveling pad is made of high-quality rubber for corrosion resistance and stability, while the swivel section uses a steel ball raceway for precise, smooth steering. The powder-coated finish withstands more than 300 hours of neutral salt spray testing. Available in plate-mount and threaded-stem versions, the plate-mount model comes with mounting-hole spacings such as 42 × 42 mm, 58 × 58 mm, and 70 × 70 mm; threaded-stem options include M8, M12, and M16. These casters are widely used in inspection, medical, optical, cleanroom, and packaging equipment; CNC and precision machine tools; marine engineering equipment; offshore wind power; offshore oil and gas extraction; and environmental protection projects.

CL Series Couplings

CL Series Couplings

CL series couplings are available in models from CL-090 to CL-225, classified by outside diameter. They connect motors to lead screws or shaft ends and transmit torque. The catalog lists specifications including maximum torque, rated torque, maximum rotational speed, outside diameter D, overall length L, L1/L2 dimensions, and minimum and maximum bore diameters. The series covers maximum torques of 2.4~60 N·m, maximum speeds of 2000~3000 rpm, outside diameters of approximately 53.58~127 mm, and bore diameters of approximately 10~60 mm. Select a coupling based on load torque, speed, bore fit, and available installation space.

GR Series Star Couplings

GR Series Star Couplings

GR series star couplings use a star-shaped elastomer as a cushioning element to provide a flexible connection between servo or stepper motors and ball screws or drive shafts. They compensate for radial, angular, and axial misalignment and absorb vibration. The catalog covers GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, and GR100 sizes, with dimensions including maximum outer diameter, bore length, small end diameter, and overall length to help select the right coupling for the shaft diameter and available installation space.

Locking Assemblies

Locking Assemblies

Locking assemblies are advanced mechanical components used to create keyless connections between hubs and shafts under heavy loads. Tightening high-strength bolts generates pressure and friction between the mating surfaces, making them widely suitable for power transmission. Their advantages include friction-based transmission without keyways that weaken connected components, relative movement or wear, resulting in high strength and a long service life. They are easy to remove by loosening the bolts and offer good interchangeability. Available in various designs, they can withstand multiple loads and be installed in series to suit the load. Installation requires no heating, cooling or pressurizing equipment; the bolts simply need to be tightened to the specified torque. Shaft and bore machining tolerances are less demanding than for interference fits, the hub position on the shaft can be easily adjusted, and components that are difficult to weld can also be connected. This series also includes common taper bush sizes, with models such as 1008, 1108, 1210, 1615, 2012, 2517, 3030, 3525, 4040, 5040 and 5050. Specifications range from 35–177.5mm in maximum outer diameter, 22.3–127mm in taper bush length and 10–57 N·m in tightening torque, accommodating a variety of shaft diameters and hub combinations.

Taper Bush

Taper Bush

A taper bush is a basic power transmission component used to create a keyless friction connection between a shaft and a hub. Tightening high-strength bolts presses the tapered surfaces together, transferring torque and axial force through contact pressure and friction. It eliminates the weakening of the shaft and hub caused by keyways, is easy to install and remove, offers good interchangeability, and can be used in multiple units in series. This series covers 20 sizes from Bush No 1008 to 5050, with maximum outside diameter A of 35~177.5mm, bush length B of approximately 22.3~127mm, and matching wrench sizes 3~14 with corresponding tightening torques. The model number is the standard Bush No: the first two digits indicate the maximum bore size (inches×10), and the last two indicate the bush length (inches×10). For example, 1008 has a 1.0-inch bore and is 0.8 inches long, while 2012 has a 2.0-inch bore and is 1.2 inches long. The same page also describes locking assemblies: they release their grip under overload to protect equipment and are suitable for mechanical connections under heavy loads.

Jinde (Jinyan) T-Type Lead Screw Nuts

Jinde (Jinyan) T-Type Lead Screw Nuts

Jinde (Jinyan) T-type lead screw nuts are trapezoidal lead screw nuts used with T-type trapezoidal lead screws to convert rotary motion into linear motion. They are suitable for light-duty drive applications in woodworking machinery, packaging equipment, lifting platforms, and more. Screw outer diameters range from 16~40mm, with three pitch options: P4, P5, and P6. All have a pressure angle of 30 degrees. Nut dimensions are specified as outer diameter×length, such as Ø29×20, Ø34×25, Ø37×25, Ø44×25, Ø47×25, Ø49×25, and Ø54×25. Each nut must be matched to a screw of the corresponding diameter. Screw lengths are available in 250, 300, 350, 400, 500, 600, and 1000mm; extended lengths of 1500mm and 2000mm are also available for screws with outer diameters of 20mm and above. To select a model, first determine the screw outer diameter based on the load, then select the matching nut model according to the pitch (P4/P5/P6) and nut outer diameter×length.

Precision Helical Gears / Helical Racks

Precision Helical Gears / Helical Racks

Made from 45# steel, these precision helical gears and racks are used in machine tool feeds, precision drives, and linear motion systems for automated equipment. The helical gears meet DIN8 and Chinese national standard grade 7 accuracy, with a right-hand helix angle of 19°31′42″ and a pressure angle of 20°. They are quenched and tempered to a hardness of HB20-25, with four sides precision-ground and teeth precision-shaped. The helical racks are available in two accuracy grades: precision-milled grade 7 and ground grade 6. They have a pressure angle of 20° and a right-hand helix angle of 19°31′42″, with a hardness of 18-20 before quenching and 45-48 after quenching. Custom machining is available to customer requirements.

45# Steel Worm Gears and Worms

45# Steel Worm Gears and Worms

These worm gears and worms are made from high-quality 45# carbon structural steel. Common modules include 1.5m, 2.0m, 2.5m, 3m and 4m, with 20~60 teeth. Large quantities are normally in stock. They are used in reduction drives, indexing mechanisms and worm gear sets for various types of machinery. Custom manufacturing is available to customer drawings or samples, including non-standard tooth counts, modules and bore sizes. The tooth surfaces can be quenched and tempered, providing good load capacity, smooth transmission and low noise.

DMPS Series Medium-Duty Casters

DMPS Series Medium-Duty Casters

DMPS Series medium-duty super synthetic rubber casters are suitable for locations with smooth floors, such as supermarkets, schools, hospitals, office buildings, and hotels. They support loads of 50–150 kg. The lightweight, flexible, quiet, and attractive caster frames are stamped from thin steel sheet and electroplated. Available with single- or double-row ball bearings, they come in popular 3-, 4-, and 5-inch sizes, with wheels made of nylon, polyurethane, or rubber (TPR). They offer low starting resistance and quiet operation.

45# Steel Bevel Gears

45# Steel Bevel Gears

The 45# steel bevel gear series is made from 45# steel and designed to transmit motion and power between intersecting shafts. The range includes 45° bevel gears (modules 1m to 6m, with customizable tooth counts), 1:1 bevel gears, and 1:2 bevel gears. Common specifications range from module 1.5 to module 4, with 15 to 60 teeth. A large selection is regularly stocked, and custom machining is available to customer requirements. These gears offer high strength, good wear resistance, and smooth transmission, and are widely used in machine tools, gear reducers, agricultural machinery, and other drive systems.

45# Steel Gear Rack

45# Steel Gear Rack

The 45# steel gear rack (helical rack) is a linear drive component in a rack-and-pinion system. It meshes with a helical gear to convert rotary motion into linear motion and vice versa. Made from 45# steel, this series has a 20° pressure angle and right-hand teeth with a helix angle of 19°31′42″. It can be manufactured to DIN8/Chinese national standard grade 7 accuracy; precision milling achieves grade 7, while grinding achieves grade 6. Hardness is 18-20 in the unquenched state and 45-48 after quenching. Four-sided precision grinding, precision shaping, and quenching and tempering (HB20-25) are also available. Large quantities are regularly stocked, and custom manufacturing is available to customer drawings or requirements. Applications include linear drives for machine tools, automation equipment, and lifting mechanisms.

Square-Thread Lead Screw

Square-Thread Lead Screw

The square-thread lead screw (rectangular-thread lead screw) is a sliding lead screw made from 45# steel. Its rectangular thread profile provides transmission efficiency and wear resistance between those of ordinary threaded screws and ball screws. It is commonly used for low-speed, heavy-load linear motion in machine tool feeds, lifting mechanisms, woodworking machinery, packaging equipment, and automation equipment. The catalog specifies diameter and length: nine diameters of 20, 24, 30, 34, 36, 40, 45, 50, and 60 mm, and nine lengths of 250, 300, 350, 400, 500, 600, 1000, 1500, and 2000 mm. Order using the format “diameter×length”; the default unit is mm. A black-oxide-finished 45# steel trapezoidal-thread lead screw is also available in the same series. We maintain a large inventory and can manufacture non-standard diameters and lengths to customer drawings.

45# Steel Trapezoidal Lead Screw (Black Oxide)

45# Steel Trapezoidal Lead Screw (Black Oxide)

The 45# steel trapezoidal lead screw (black oxide) is a power transmission component used to convert rotary motion into linear motion. The catalog lists diameters of 20, 24, 30, 34, 36, 40, 45, 50, and 60 mm, and lengths of 250, 300, 350, 400, 500, 600, 1000, 1500, and 2000 mm. It is made of 45# steel with a black oxide surface treatment. Orders are specified as “diameter×length” in mm; both dimensions must be specified when selecting a product. Listed alongside square-thread lead screws, it is suitable for general mechanical transmission and positioning applications.

FX Series Motorized Stages

FX Series Motorized Stages

The FX series comprises standard motorized X-axis stages with linear ball guides, ball screw drives, and aluminum alloy platforms. They are suitable for precision single-axis positioning and reciprocating transfer in automated equipment. Three platform sizes are available: 40×40mm, 60×60mm, and 80×80mm, corresponding to the model prefixes FX40, FX60, and FX80. Different drive and guide configurations, such as GBNR, LBN, and LBNR, can be selected to suit travel and installation requirements. The standard accuracy grade is N. Cable outlets are available on the left (L) or right (N), and the motor wiring can be supplied without a connector (N) or with a D-SUB15 (VGA) connector. Standard mounting features on the platform include 4-φ3.4 through holes, 4-φ6 counterbores 5.5 deep, and 8-M3 threaded holes 5 deep, enabling direct attachment of the driven tooling. The ball screw drive provides high positioning accuracy and repeatability and supports high-frequency reciprocating motion. When selecting a model, confirm the platform size, effective travel, cable outlet direction, motor type, and connector type.

FX Series Linear Modules

FX Series Linear Modules

The FX series consists of linear modules manufactured by FARAY AUTOMATION. Models are identified by frame size, with common models including FX60, FX80, FX100, and FX120, corresponding to cross-sectional widths of approximately 60/80/100/120mm. They meet linear motion requirements ranging from light to medium-heavy loads. The -LBN suffix is a factory configuration code denoting a standard combination of options, such as guide type, drive mechanism, or mounting and protection features. The series is suitable for linear transfer, positioning, and pressing operations in automated equipment and can be driven by servo or stepper motors. Select the model based on cross-sectional dimensions, effective stroke, load, and speed requirements, then use the configuration suffix to specify the structural combination.

FY Series Linear Modules

FY Series Linear Modules

FARAY FY series linear modules feature an aluminum alloy profile body. B denotes a ball screw drive, suitable for linear positioning and handling mechanisms in automation equipment. The model table defines codes including material L (aluminum alloy), drive B (ball screw), precision N, cable outlet R/L (right/left), motor N (two-phase stepper)/X (not included), and connector D (D-SUB15/VGA). The examples cover FY40 and FY80 sizes, which can be selected according to available space and load requirements. Refer to the corresponding drawings to confirm travel, lead, and mounting dimensions.

FY Series Linear Modules

FY Series Linear Modules

FY series linear modules (linear slides) are grouped by base size. The catalog lists four sizes: FY60, FY80, FY100 and FY120. The number corresponds to the module's base/guide cross-sectional width in mm, covering applications from light-load precision positioning to medium- and heavy-load handling. A short suffix distinguishes configurations within each size. The configuration code shown on this catalog page is LBN, denoting the standard configuration for that size. When selecting a module, use the base size to determine the load and rigidity range, then use the suffix to determine details such as stroke, drive type, motor mounting orientation and protection type. Different configurations of the same size share the same mounting interface dimensions, making it easier to standardize equipment structures.

FX Series Electric Linear Stages

FX Series Electric Linear Stages

The FX series electric linear stage is a precision single-axis linear module integrating a ball screw drive and a two-phase stepper motor. It is designed for positioning, handling, dispensing, inspection, and other automation applications. The series is available in two sizes, FX60 and FX80. Its steel transmission unit uses a ball screw drive (B) for high rigidity, low backlash, and smooth operation. Motor options include a two-phase stepper motor (N) or no motor (X). Cable exit options are right (R) or left (L), and a D-SUB15 (VGA) connector (D) is available. The model code combines “FX+size” with “transmission unit(G)+accuracy grade(B)+motor type(N),” as in FX60-GBN and FX80-GBN.

FY-GBN Series Linear Modules

FY-GBN Series Linear Modules

The FY-GBN series is a range of linear modules (linear actuators) from FARAY AUTOMATION. The catalog includes FY40-GBN, FY60-GBN, and FY80-GBN models in three cross-section/frame sizes of 40/60/80 mm, meeting linear motion requirements for different strokes and loads. The series is grouped by frame size, and the suffix “GBN” identifies the structural type. Different drive and mounting configurations are available, along with variants such as FY60-GBNR-ND. These products are suitable for linear handling, positioning, and pressing in automated equipment and can be paired with drive units such as servo and stepper motors.

KA RN Square Lock Nut

KA RN Square Lock Nut

KA RN series square lock nuts are designed for bearing support housings. The internal thread and end face are machined simultaneously to ensure precision. Multiple thread specifications are available (M5×0.5P to M40×1.5P), with outer diameter D ranging from 12.5 mm to 62 mm, height h from 5 mm to 25 mm, bore d from 9 mm to 48 mm, and two mounting threaded holes (M3 to M8). Wrench dimensions L and F vary by specification, while the maximum locking torque ranges from 0.9 Nm to 8 Nm. Special models with h10 or h21 tolerances are available. Custom non-standard nuts can be produced.

Medium-Duty Caster Series

Medium-Duty Caster Series

The medium-duty caster series is suitable for factory automation equipment, material handling, and logistics applications. Available in a range of materials, including polyurethane (PU), thermoplastic rubber (TPR), plastic (PP), heat-resistant material (PH), and rubber (AR), these casters work on indoor and outdoor surfaces to meet a variety of handling needs. High-strength synthetic rubber wheels are ideal for noise-sensitive environments such as hotels, medical facilities, and areas with wood or tile flooring. Nylon and iron wheels are suitable for uneven surfaces or areas with metal shavings. Choose between top-plate and threaded-stem mounting. Load capacity: 70–280 kg; overall height: 75–125 mm; wheel diameter: 3–5 in.

FXS Series Motorized Linear Stage

FXS Series Motorized Linear Stage

The FARAY FXS Series standard motorized X-axis stage features a linear ball guide and ball screw drive. It has a 50×50mm table, 20/30mm travel, and a ball screw with an 8mm diameter and 1mm lead. The stainless steel body has an electrolytic silver-plated finish, weighs approximately 0.57/0.72kg, and uses an FAMCS11.6-5*5 coupling. Accuracy grade N denotes the standard type, and wiring direction N denotes standard wiring. Full/Half step resolutions are 5μm/2.5μm, respectively, with a maximum full-step speed of 20mm/s. It is suitable for precision linear positioning and short-travel mechanisms in automated equipment.

FXS Series Precision Stages

FXS Series Precision Stages

FXS Series precision stages use a ball screw drive (8 mm screw outside diameter, 1 mm lead) and linear ball guides. Two platform sizes are available, 60×60 mm and 60×80 mm, with travel ranges of 20 mm, 30 mm, and 50 mm. The stage body is made of stainless steel with an electroless nickel finish and weighs approximately 0.8 kg. Suitable for precision positioning applications where size and weight are critical, these stages provide high-precision, short-travel feed for automated assembly, inspection, dispensing, and optical adjustment equipment. The standard connector is D-SUB, and the standard cable exit is not designated as left or right. Please specify separately if an HRS connector is required for the stage wiring. Consult the specification table for the relevant travel range to confirm the accuracy grade, resolution (Full/Half), maximum speed, unidirectional positioning accuracy, repeatability, load capacity, lost motion, parallelism, and straightness of travel.

FXN/FXC Series Electric Linear Stages

FXN/FXC Series Electric Linear Stages

FARAY standard electric single-axis stages (linear stages) combine recirculating ball linear guides with a ball screw drive unit. They are used in automated equipment for precision linear positioning, dispensing, screw fastening, inspection, material handling, and other applications. The model uses a six-character code: material S stands for stainless steel, drive unit B stands for ball screw, the precision grade is represented by one letter, wiring type N indicates standard wiring, motor type N indicates a two-phase stepper motor and X indicates no motor, and connector type D indicates a D-SUB15 (VGA) connector. There are two model types, FXN and FXC, with 50100 as a common size code (e.g., FXN50100-SBNN-ND and FXC50100-SBNN-ND). The stages have a compact design, and the travel, motor, and connector configurations can be selected to suit equipment requirements, making them suitable for a wide range of factory automation linear motion applications.

FXN/FXC Series Linear Stages

FXN/FXC Series Linear Stages

The FXN/FXC series comprises FARAY standard electric X-axis linear stages with recirculating ball guides and ball screw drives, designed for precise linear positioning in factory automation. Model numbers consist of a base model and codes for material, drive unit, accuracy grade, wiring type, motor type, and connector type: material S denotes stainless steel; drive B denotes a ball screw; accuracy N denotes standard grade; wiring N denotes standard wiring; motor options are N for a two-phase stepper motor or X for no motor; and connector D denotes D-SUB15 (VGA). Catalog examples include FXN50100-SBNN-ND and FXC50100-SBNN-ND.

FXN/FXC Series Ball Screw Linear Modules

FXN/FXC Series Ball Screw Linear Modules

The FXN/FXC series comprises precision linear modules driven by ball screws. Their bodies are made of stainless steel, with common frame sizes of 60 and 80 and travel lengths of 50mm and 100mm. Modules are ordered using a multi-part code that specifies the material, drive unit, accuracy grade, cable exit, motor type, and connector type in sequence, as in FXN60100-SBNN-ND and FXC8050-SBNN-ND. Motor options are a two-phase stepper motor (N) or no motor (X); connector options are D-SUB15 (VGA) or no connector. These compact, rigid modules provide consistent positioning accuracy and are commonly used for precision linear positioning in automated applications such as electronics assembly, semiconductor equipment, inspection, and material handling.

FX N/C 60-SBN Series Recirculating Ball Linear Motion Stages

FX N/C 60-SBN Series Recirculating Ball Linear Motion Stages

The FARAY FX N/C 60-SBN series comprises standard motorized linear motion stages with a recirculating ball drive. The stage measures 60×60 mm and is 60 mm high. Its stainless steel body has a chrome-plated finish. Two configurations are available: type N (body weight approximately 1.8 kg) and type C (approximately 1.94 kg). The stage does not include a driver and requires an external motor and controller. Resolution is 10 µm/5 µm, with travel ranging from 30~300 mm. Common standard travel lengths are 150/200/250/300 mm; short-travel options include 30/50/75/100 mm, with travel increasing in 50 mm increments. Model numbers follow the format FX+N/C+60+travel-SBNN-ND-P2. Catalog photographs also show FXN60100-SBNN-ND and FXC60100-SBNN-ND. Applications include automated electronics assembly, inspection, dispensing, and small-scale precision positioning.

Quiet Rubber Wheels

Quiet Rubber Wheels

The Quiet Rubber Wheel series includes medium-duty and heavy-duty models to meet different load requirements. The medium-duty type (Series 22) supports 60–100 kg, with wheel diameters of 75–125 mm and heights of 75–125 mm. It is suitable for medium-duty hand trucks, food-service equipment, and medium- to light-duty manually operated outdoor carts. The heavy-duty type (Series 60) supports 120–200 kg, with wheel diameters of 100–200 mm and heights of 105–200 mm. It is suitable for relatively heavy, non-towed push-pull carts, catering equipment, and heavy-duty outdoor mobile equipment. The rubber wheels offer quiet operation and wear resistance. The brackets have a corrosion-resistant baked-enamel finish, and the wheels are 10 mm wider than comparable products for improved stability. They feature precision chrome-steel double ball bearings and waterproof, dustproof covers. Operating temperature: -35 to 80°C; hardness: 65D.

FYN/FYC Series Motorized XY Stages

FYN/FYC Series Motorized XY Stages

The FYN/FYC series consists of standard motorized XY stages with recirculating linear ball bearings. Made of stainless steel and driven by ball screws, they are suitable for precision two-axis positioning and reciprocating motion in automated equipment. The model code specifies the material, drive unit, accuracy grade, wiring configuration, motor type, and connector type. The examples on this page have a size code of 5075, standard accuracy, standard wiring, a choice of a two-phase stepper motor or no motor, and a D-SUB15 (VGA) connector. FYN and FYC denote different configurations and can be selected according to equipment space and drive requirements.

FYN/FYC Series Precision Stages

FYN/FYC Series Precision Stages

The FYN/FYC series comprises precision motorized stages with a 60×60mm platform. The stainless steel body is treated with electroless nickel plating, and the drive uses an 8mm outside diameter ball screw with a choice of P1(1mm) or P2(2mm) lead. The guide uses recirculating linear ball bearings, and a two-phase stepper motor is included as standard. A D-SUB15(VGA) connector is optional; the connecting cable (2m/4m, with loose wires at one end) and FAMCS11.6-5*5 driver are sold separately. Standard travel ranges are 30 / 50 / 75mm. Resolution (full step/half step) is 5/2.5µm(P1) and 10/5µm(P2), with maximum speeds of 20mm·s⁻¹(P1) and 40mm·s⁻¹(P2). Unidirectional positioning accuracy is 15µm, and repeatability is ±1µm. Body weight ranges from 2.2~2.88kg depending on travel; the FYC model weighs approximately 0.38kg more than the FYN with the same travel. Suitable for micron-level feed and positioning in precision measurement, optical adjustment, semiconductor, and automation equipment.

FY N/C 80□-SBN Series Motorized XY-Axis Linear Stage with Recirculating Ball Bearings

FY N/C 80□-SBN Series Motorized XY-Axis Linear Stage with Recirculating Ball Bearings

The FARAY FY N/C 80□-SBN series is a standard motorized XY-axis linear stage with recirculating ball bearings. It features an 80-size body and an 08 ball screw drive, with a choice of 1mm or 2mm lead. The stage uses linear recirculating ball guides and is made of stainless steel with an electrolytic nickel-plated finish. Standard travel is 30/50/75mm, with resolution of 5/2.5μm (1mm lead) or 10/5μm (2mm lead), maximum speed of 20/40mm/sec, unidirectional positioning accuracy of 15μm, and repeat positioning accuracy of ±1μm. The standard N-type body weighs approximately 3.0~3.68kg, while the C-type weighs approximately 3.58~4.06kg. It is suitable for automated equipment requiring precision linear positioning on two XY axes.

FZV Series Linear Modules

FZV Series Linear Modules

The FARAY FZV series of linear modules includes models such as FZV4006, FZV6008 and FZV8010, with configurations including GCN and GCNN-ND. The listed mechanical specifications include table sizes of 40×40 mm and 60×60 mm, and mounting hole types such as 4-M4 through holes and 4-Ø4.5× through holes. These modules are suitable for linear motion, positioning and handling mechanisms in automated equipment. Table size, mounting holes and configuration can be selected by model code. Model codes consist of FZV + size number + configuration suffix. Specific stroke, accuracy and load ratings should be confirmed against the complete catalog.

FR Series Motorized Linear Stages

FR Series Motorized Linear Stages

The FARAY FR Series motorized linear stages are precision linear modules driven by stepper motors. They are available in four platform sizes—FR39, FR59, FR80, and FR100—to cover light- to medium-load applications. Mechanical specifications include travel, drive mechanism, guide rail, stage material and surface treatment, body weight, resolution (pulses), maximum speed (full-step), unidirectional positioning accuracy, repeatability, load capacity, free play, parallelism, running concentricity, and running parallelism. Electrical specifications include driver brand/model, connectors, stage-side and controller-side connectors, travel home sensor, travel limit sensor, supply voltage, control output, and output control. The standard version operates on DC+24V, and the male connector pinout includes motor leads A/B, stage travel ORG1 output, and ground. These stages are suitable for precision positioning, handling, and inspection stations in automated equipment.

FR-LDN Series Linear Modules

FR-LDN Series Linear Modules

The FR-LDN series comprises linear modules/linear motion units listed in the FARAY AUTOMATION catalog. This page presents three models: FR59-LDN, FR80-LDN, and FR100-LDN, with sizes distinguished by the numbers 59, 80, and 100 in their model identifiers. They are suitable for automated mechanisms requiring reciprocating linear motion. Parameters such as stroke, lead, rated load, repeatability, and motor mounting method are not detailed on this page. Consult the complete catalog and consider actual operating conditions when selecting a model.

Standard Electric Linear Stage

Standard Electric Linear Stage

The FARAY standard electric linear stage is a single-axis linear motion actuator commonly used in factory automation. A servo or stepper motor drives a lead screw, moving the stage back and forth along a guide rail. The catalog discusses six-axis mounting applications, focusing on axial accuracy and travel. These stages can be used individually or combined into multi-axis configurations, such as six-axis Cartesian robots or positioning platforms. Axial accuracy and effective travel are the two key parameters to consider during selection. Models are configured using codes for stage specifications (cross-sectional dimensions and screw lead), travel length, motor and controller configuration, protective features, and mounting accessories. Users can select combinations to meet their load, speed, and repeatability requirements.

FX-A Series Electric Linear Stages

FX-A Series Electric Linear Stages

The FARAY FX-A series of standard electric linear stages is available in three sizes: 80, 100, and 120. This page provides electrical interface and wiring definitions. The male connector includes motor leads A/B, CWLS/CCWLS limit outputs, the stage travel origin output ORG1, the motor rotation origin output ORG2, a DC+24V power input, and ground. Unused pins are also listed. The series is suitable for automated equipment with an external drive/controller, and the pin definitions simplify motor, limit, origin, and power wiring and troubleshooting. For mechanical travel, lead, load capacity, and mounting dimensions, refer to the mechanical specifications for the relevant model.

FY-A Series Electric Linear Slides

FY-A Series Electric Linear Slides

The FY-A series electric linear slides are available in three sizes: 80, 100, and 120. This page focuses on the electrical specifications of the standard model, which uses a male connector, and provides pinout and wiring diagrams. The 16-pin interface includes motor leads A/B, CWLS and CCWLS limit outputs, a motor rotation ORG2 output, a slide travel ORG1 output, a DC+24V power input, DC 0V, and ground. Unused pins are clearly left unassigned. The wiring definitions cover power, motor drive, and limit/home signals between the host controller and the slide, facilitating machine wiring and motion control integration.

Medium-Duty Quiet Bread-Shaped Wheel

Medium-Duty Quiet Bread-Shaped Wheel

Bread-shaped wheels (medium-duty quiet wheels) are suitable for clean, smooth indoor floors and are commonly used in the medical industry thanks to their quiet operation. The inner bracket is chrome-plated for rust resistance and features an anti-wrapping design. The environmentally friendly wheels are made of chemical-resistant chloroprene rubber and leave no marks. Precision ball bearings ensure smooth, effortless rotation. Available with metal caster brackets featuring dual brakes; each wheel has a maximum load capacity of 146 kg. The metal brackets are zinc-plated for rust resistance, and the wheels are made of high-grade synthetic rubber. Features include quiet, wear-resistant operation, easy rolling, agile steering, high elasticity, special ultra-quiet bearings, and an anti-wrapping design.

FARAY Standard Electric Linear Slide

FARAY Standard Electric Linear Slide

The FARAY standard electric linear slide is a single-axis linear motion actuator for factory automation. It operates on DC 24V and uses a 15-pin male connector for motor leads and signal connections. Wiring includes four A/B motor leads, CWLS/CCWLS forward and reverse limit outputs, an ORG1 slide travel origin output, an ORG2 motor rotation output, power inputs (DC+24V / DC 0V), and ground. A PLC or motion controller can be connected for position feedback and limit protection. The slide supports two-phase and five-phase stepper motors from Taiwanese and Japanese manufacturers, including Oriental Motor and SANYO, classified into mounting groups A/B/C/D. Motors have a rated current of approximately 0.67~2.3A, a step angle of 1.8°/0.72°, and a maximum energized holding torque of 0.06~0.58 N·m. Optional drivers include GTR22G-D, GTR24M3, and CVRD518-K. It is suitable for automated applications requiring precise reciprocating positioning, such as electronics assembly, dispensing, material handling, and inspection.