product — Page 59

ISD-G Series Silencers
ISD-G series silencers reduce exhaust noise in pneumatic circuits and are typically installed on the exhaust ports of pneumatic components such as solenoid valves and cylinders. The catalog lists four ISD-G sizes by port thread size: 1/8, 3/8, 1/2 and 3/4. The selected size must match the thread on the equipment's exhaust port. The series is suitable for pneumatic systems with limited space. Detailed specifications such as material, operating pressure, flow rate and noise reduction are not listed on this page, so the medium, pressure and port size should be considered when selecting a model.

FBSM-s Series Silencers
The FBSM-s series comprises threaded pneumatic silencers installed on the exhaust ports of pneumatic components such as cylinders and solenoid valves to reduce exhaust noise and suppress oil mist splatter. Models are classified by thread size, with seven port sizes available: 1/8, 1/4, 3/8, 1/2, 3/4, 1, and 1 1/2. These accommodate exhaust ports ranging from those on miniature cylinders to high-flow directional valves. The catalog lists five dimensional parameters: ΦD (body outside diameter), B (hex thickness), F (width across flats), R, N (thread size), and L (overall length), making it easy to check installation and wrench clearance during selection. The 1/8 size has a ΦD of Φ5 and an overall length of 12.5mm. ΦD and L increase with thread size; the 1 size has a ΦD of Φ20 and an overall length of 25.3mm. The compact design and low airflow resistance make these silencers suitable for exhaust noise reduction in general industrial pneumatic circuits.

BSM/BSL Series Silencers
Pneumatic silencers are installed on the exhaust ports of components such as cylinders, solenoid valves, and pneumatic motors to reduce exhaust noise and limit oil mist emissions. This series includes several designs: BSM straight-through (standard), BSL long, BSM-G/BSL-G with male G threads, FBSM-s short flat-head, BSLM miniature (M5), NC-BSM bird's nest, and ISD-G adjustable types. They are typically made of sintered bronze or copper alloy. Connection threads include R/N tapered pipe threads and G parallel threads, in sizes 1/8~1 1/2 inch and M5. Key dimensions are outside diameter ΦD, hex width across flats B, thread length F, and overall length L. The long BSL has a significantly greater L than the straight-through BSM of the same size, allowing selection based on available installation space and noise reduction requirements.

SP Series Quick Couplings
The SP series consists of self-locking tube-type quick couplings for rapid connection and disconnection in pneumatic piping. One end features a self-locking tube connection: simply insert the air tube, and the locking claws and O-ring secure and seal it. To remove the tube, press the release ring. No tools are required for installation or removal. The series is available in four connection sizes: SP10, SP20, SP30 and SP40. The numbers correspond to different connection diameters and rated flow capacities; larger sizes accommodate larger tube diameters and higher flow rates. These couplings are suitable for quick piping connections in compressed air lines, pneumatic actuators, pneumatic tools and automation equipment. Together with other types in the series, including SH (self-locking tube connection), SM (self-locking male thread), SF (self-locking female thread) and PF (self-locking male thread), they form a complete quick coupling system. Plugs and sockets can be combined to suit the piping arrangement. Select the appropriate size based on the air tube outside diameter, thread size, operating pressure and medium. Specify separately if a copper- and zinc-free environment is required.

SH Series Quick Couplings
SH Series quick couplings are self-locking pneumatic couplings designed for push-in hose connections. An integrated self-locking mechanism automatically secures the hose when inserted; pressing the sleeve releases it. They provide quick connection and disconnection and reliable sealing, helping prevent air leaks and hose detachment. The series is available in four size codes—SH10, SH20, SH30 and SH40—covering common hose diameters and flow rates from small to large. They can be used interchangeably with compatible quick couplings in the same family, including SP (self-locking hose connection), SM (self-locking male thread), SF (self-locking female thread) and PF (self-locking male thread). They are widely used for air supply connections in compressed air lines, pneumatic tools, pneumatic actuators and automation equipment. Select the size code according to the hose outside diameter and required flow rate, and consider the operating pressure, medium (clean, dry compressed air is required) and any requirements for copper- and zinc-free materials.

SM Series Quick Couplings
SM series quick couplings are self-locking, male-threaded connectors for pneumatic lines. The catalog lists four models—SM10, SM20, SM30, and SM40—to meet different connection requirements. The self-locking design allows quick connection and disconnection while keeping the coupling secure, and the male-threaded end screws into a matching female-threaded port. They are suitable for quick assembly and maintenance of factory automation pneumatic circuits, pneumatic tools, and piping systems. Confirm the thread specifications, compatible hose outside diameter, operating pressure, and media against the actual product or complete catalog.

SF Series Quick Couplings
The SF series consists of self-locking, female-threaded pneumatic quick couplings, available in models SF10, SF20, SF30 and SF40. They enable quick connection and disconnection of hoses in air lines. The self-locking design provides secure connections, easy operation and effective sealing. Available in a range of connection sizes to accommodate different hose diameters, these couplings are widely used in automation equipment, pneumatic control systems and other applications. Refer to the technical specifications for each model for thread sizes and compatible hose diameters.

PF Series Quick Connect Couplings
The PF series consists of self-locking male-threaded quick connect couplings designed for quick connection and disconnection between hoses and female-threaded components or equipment ports in pneumatic lines. Their self-locking design makes connection and disconnection easy and provides a secure lock that helps prevent loosening caused by pressure fluctuations. They are suitable for common pneumatic media, including air and vacuum. The series includes four models, PF10, PF20, PF30 and PF40, with the numbers corresponding to different hose connection or thread sizes for common small- to medium-diameter pneumatic circuits. The coupling bodies are typically made of materials such as nickel-plated brass, providing both corrosion resistance and mechanical strength. Compatible with common pneumatic hoses such as PU, PA and PE, they are widely used in automated equipment, packaging machinery, electronics assembly lines and various pneumatic control systems.

SQ Series Single-Ball Rod End Bearings
SQ Series single-ball rod end bearings feature a ball housing with an “L”-shaped projecting shank and an internal thread. The ball housing is made of zinc-based alloy, and the threads are available in left- and right-hand versions. Right-hand threads are supplied as standard; left-hand threads must be specified by adding “L” to the model designation. These bearings are available with a seal (suffix -RS) or without a seal (suffix omitted). A range of bore sizes is available from 5 mm to 22 mm, with thread sizes from M5×0.8 to M22×1.5. Overall lengths range from 29 to 95 mm, and weights are approximately 0.026–0.713 kg. Suitable for automation equipment, mechanical linkages, and other applications involving frequent oscillation and radial loads, they offer a compact design, easy installation, and good wear resistance.

KNPC Series Stainless Steel Female Connectors
KNPC series stainless steel female connectors, including BKN-PC models, are primarily used to connect piping for air, water, steam and corrosive liquids. The body and tightening nut are made of SUS316/SUS316L stainless steel for excellent corrosion resistance. The tubing is inserted and the nut tightened to provide a secure, reliable seal. Suitable for PU and nylon tubing with outer diameters from Φ4~Φ16, the connectors are available in sizes including M5, O1, O2, O3, O4 and G01~G06. Operating pressure is 0~3.0 MPa, pressure resistance is 5.0 MPa, and operating temperature is -50~+300℃. The catalog provides dimensions including T, ΦD, L, A, E, H and H1, and lists order number KN-0805-01 (Φ8×Φ5).

BKN Series Stainless Steel Locknut Fittings
BKN series stainless steel locknut fittings (push-in fittings) feature stainless steel bodies for quick connections in pneumatic, water supply, and mildly corrosive media lines. Seven tube outside diameters are available: Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, and Φ16. Thread options include M5 and M6 metric threads, R1/8, R1/4, R3/8, and R1/2 tapered pipe threads, and G1/8, G1/4, G3/8, and G1/2 parallel pipe threads. The series includes four configurations: PL (KNPL), PL-G (KNPL-G), PZL, and PCF. Hex sizes across flats range from S10 to S24, while dimensions L, L1, A, and E increase according to model and size. Suitable for piping in automation equipment, packaging machinery, semiconductor equipment, and food machinery, these fittings can be used with nylon or PU tubing. Simply insert the tubing to lock and seal it.

KNPL Series Stainless Steel Locknut Fittings
KNPL series stainless steel locknut fittings connect and secure tubing to threaded ports in pneumatic lines. The catalog covers KNPL, KNPL-G, BKN-PZL and BKN-PCF configurations. Compatible tube outside diameters range from Φ4 to Φ16, with thread sizes M5, M6, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8 and G1/2. The table lists overall and wrench dimensions including L1, L, A, E, H and H1 to help select fittings for the available installation space and threaded port. Stainless steel is suitable for pneumatic systems with corrosion resistance and cleanliness requirements.

PZL Forged Stainless Steel Female Fitting
PZL series forged stainless steel female fittings connect tubing to threaded ports in pneumatic and fluid lines. Thread sizes include M5, M6, R1/8, R1/4, R3/8 and R1/2, with compatible tube diameters of Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16. The L length is 18~30.5 mm, A dimension 19~33 mm, E dimension 5~14 mm, H height 10~17 mm, and hex size across flats S10~S24. Corrosion-resistant, reliably sealed and easy to install, these fittings are suitable for automation equipment, pneumatic systems and general industrial piping.

PCF Series Forged Stainless Steel Female Fittings
PCF series female fittings have a forged stainless steel body and the model prefix BKN-PCF. They connect pneumatic tubing to threaded ports and accommodate tube outside diameters of Φ4, Φ6, Φ8, Φ10, Φ12, Φ14 and Φ16 mm. Thread sizes include M5, G1/8, G1/4, G3/8 and G1/2. Overall and hex across-flats dimensions, including L, A, E, H and H1, are provided for each size to assist with selection and installation. Suitable for automated equipment, pneumatic circuits and corrosion-resistant applications.

BKN-PB/PLB Series Pneumatic Push-in Fittings
The BKN-PB/PLB series consists of push-in fittings for pneumatic lines. One end has a male thread (M5 or M6 metric thread, or G1/8, G1/4, G3/8 or G1/2 pipe thread), while the other has a push-in port for metric pneumatic tubing such as Φ4 and Φ6. They connect nylon or PU tubing to cylinders, solenoid valves and air preparation components. The series includes BKN-PB straight and BKN-PLB configurations. The PLB type is shorter and more compact, making it suitable for installation in confined spaces. For each nominal size, the catalog lists dimensions including thread size T, compatible tube outer diameter ΦD, assembly length L1, overall length L, wrench clearance A and E, and hex widths across flats H and H1, to aid selection and installation checks. The fittings are easy to connect and disconnect, provide a reliable seal, and can be repeatedly disassembled and reassembled. They are suitable for standard compressed air systems.

BKN-PB/PLB Series Pneumatic Push-In Fittings
The BKN-PB/PLB series comprises push-in fittings for pneumatic lines, available in PB straight and PLB elbow configurations. One end has a male thread (M5, M6, G1/8, G1/4, G3/8, G1/2, etc.), while the other has a push-in port compatible with Φ4, Φ6, Φ8 and Φ12 metric nylon or polyurethane tubing. Once inserted, the tube is automatically secured and sealed by an internal spring clip and O-ring. To disconnect it, simply press the release ring; no tools are required. The catalog lists models by thread size and tube diameter and provides installation dimensions including L1 (threaded end length), L (overall length), A (effective thread length), E (body reference dimension), and H and H1 (hexagon across-flats dimensions, S10~S24), making it easier to plan tubing layouts and select wrenches. These fittings are widely used in automation equipment, cylinder and solenoid valve piping, fixture air lines, packaging lines, and electronics assembly lines. They are suitable for compressed air, with a typical operating pressure of 0~0.9 MPa and an operating temperature of approximately -5~60 ℃, depending on the tubing material.

BKN Series Stainless Steel Female Fittings
The BKN series stainless steel female fittings (Stainless Steel Locknut Fitting) are push-in fittings for pneumatic lines. Types include PU straight fittings, PE female-threaded straight fittings, PEG reducers, PEW reducing elbows, and DXF fittings, suitable for tubing with an outside diameter of Φ4~Φ16 mm. The stainless steel body resists corrosion and rust, making these fittings suitable for food, pharmaceutical, chemical, semiconductor, and other applications with demanding cleanliness and corrosion resistance requirements. Models are specified by tubing outside diameter, hex width across flats (S10~S24), overall length L, and thread length E. The connection end has a female thread for direct connection to male-threaded fittings or threaded pipe fittings. Simply insert the tubing into the socket to seal and lock it; press the release ring to remove it. Select the model from the table based on the tubing outside diameter and corresponding thread size.

KNPE Series Stainless Steel Female Connectors
The KNPE series (BKN-PE) consists of stainless steel female connectors with locking nuts for connecting and securing nylon tubing and hoses to threaded ports. They offer corrosion resistance, reliable sealing, and repeated assembly and disassembly, and are widely used in automation equipment, pneumatic systems, and water/oil lines. The catalog lists sizes for compatible tube outer diameters of Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, and Φ16. Body outer diameter ΦD1 ranges from 10~17mm, overall length L from 21~28.5mm, and insertion length L1 from 11~17mm. Wrench sizes across flats range from S10~S24 to assist with selection and installation. The same page also lists two reducing types, KNPEG and KNPW, with code suffixes in the format “larger diameter-smaller diameter”: for example, BKN-PEG10-6 means Φ10 to Φ6, and BKN-PEW16-12 means Φ16 to Φ12. A KNDXF type is also listed, but the catalog only provides size rows for Φ4~Φ16 without specific external dimensions.

KNPEG Series Stainless Steel Female Connectors
The KNPEG series (part number prefix BKN-PEG) consists of stainless steel female connectors for quick insertion, connection, and secure locking of tubing in pneumatic and fluid lines. Their corrosion-resistant stainless steel bodies are suitable for media such as air and water. Products are named using the format “size code-compatible tube diameter.” For example, BKN-PEG6-4 denotes size code 6 and a compatible tube diameter of Φ4. Common sizes include 6-4, 8-4, 10-6, 10-8, 12-10, 14-12, 16-12, and 16-14. Key dimensions include compatible tube diameter ΦD (Φ4~Φ16), ΦD1 (43.5~57mm), overall length L (21~28.5mm), L1 (11~17mm), E (10~13mm), and hex dimensions across flats E1 and H (S10~S24). Tighten the fittings with a wrench on the hex flats during installation. The same catalog page also offers KNPE, KNPW, KNDXF, and BKN-PU variants for use with these fittings.

LHSAS Series Ball Stud
LHSAS Series ball studs feature ball studs made of 40Cr or 35 steel and seats made of high-zinc alloy. The threads meet tolerance class 6H, and the studs rotate smoothly without sticking. Axial clearance is no more than 0.3 mm, and radial clearance is no more than 0.1 mm. The products have passed 500,000-cycle oscillation durability testing and operate reliably in temperatures from -30°C to 100°C. A range of thread sizes is available, including M5×0.8, M6×1.0, M8×1.25, M10×1.5, M12×1.25, and M14×1.5. Suitable for a variety of mechanical connections and transmission mechanisms, they comply with QC/T 327-1999.

KNPW Series Stainless Steel Female Connectors
KNPW series female connectors are made of stainless steel for corrosion and high-pressure resistance, making them suitable for pneumatic tubing connections. The series is available in a range of sizes for tube diameters from Φ4 to Φ16, with various thread sizes and hex widths. Each connector features a locknut for a secure connection. They are widely used in industries with stringent corrosion resistance requirements, including food, medical, and chemical processing.

KNDXF Series Stainless Steel Female Fittings
KNDXF series stainless steel female fittings (identified as BKN-DXF in the catalog) are push-to-connect pneumatic fittings designed for straight connections between pneumatic tubing and threaded ports. They are commonly used where high corrosion resistance is required, such as in water treatment equipment, food and pharmaceutical machinery, chemical piping, and general factory automation pneumatic circuits. Made from stainless steel, these fittings feature a locking collet and seal, allowing tubing to be connected and disconnected repeatedly while providing easy installation and reliable sealing. Compatible tube outside diameters include Φ4, Φ6, Φ8, Φ10, Φ12, Φ14, and Φ16; size designations are based on tube outside diameter. The same catalog page also lists other fittings in the family, including KNPE/BKN-PE straight fittings, KNPEG/BKN-PEG bulkhead fittings, KNPW/BKN-PEW elbow fittings, and BKN-PU straight fittings, which can be combined into a complete piping solution. The catalog page for this series provides only nominal sizes and an outline drawing; the L, E, H, and H1 dimensions are marked “/” and must be confirmed using the applicable selection table or the actual product.

BKNNM-PC Series Stainless Steel Tube Fittings
The BKNNM-PC series comprises FITAT stainless steel tube fittings with a double-ferrule sealing and gripping design. During assembly, the tube is inserted into the fitting body until it reaches the shoulder. Tightening the ferrule nut compresses the front and rear ferrules radially against the tube and creates a seal against the tapered surface of the fitting body. The series is suitable for high-pressure, shock, vibration, vacuum, and high-temperature conditions and is commonly used in petrochemical, fluid handling, power generation, nuclear, and electronics piping systems. The catalog lists φ4 and φ6 tube diameters, M5 and M6 threads, and installation dimensions including L, E, H, and H1.

KTPC (MC) Straight Threaded Ferrule Fitting
The KTPC (MC) straight threaded ferrule fitting is part of the stainless steel twin-ferrule fitting series. Its twin-ferrule design is suitable for tubing connections in instrumentation lines, hydraulic and pneumatic systems, and automated equipment. It offers corrosion resistance, reliable sealing, and resistance to vibration and loosening. Tube outside diameters range from 3–25 mm in metric sizes and 1/16–1/2 in in imperial sizes. Thread sizes include PT/NPT 1/8–1, and various A, B, C, D, E, F, G, and H dimensions are available to accommodate different installation spaces.

KTPCF (FC) Series Female Straight Ferrule Fittings
KTPCF (FC) series stainless steel twin-ferrule female straight fittings provide a sealed tube connection without welding. They are suitable for instrumentation, hydraulic, and pneumatic lines. They accommodate metric tube outside diameters of 3~22mm and imperial sizes of 1/4~1/2in, with PT/PPT 1/8~1/2in female threads. Catalog numbers begin with FCG. The table lists overall and installation dimensions A, B, C, D, E, F, G, H, and T to assist with selection and piping design.

KTPM (BU) Series Ferrule Bulkhead Union
The KTPM (BU) series stainless steel double-ferrule bulkhead union provides a straight connection and secures tubing as it passes through a panel or partition. Its double-ferrule design seals reliably against the tube outer diameter, making it suitable for instrumentation, hydraulic, pneumatic and fluid lines. The catalog covers 11 sizes for tube outer diameters of 6~25 mm, with panel hole sizes of 11.5~33.2 mm and maximum panel thicknesses of 10.2~26.0 mm. Overall and installation dimensions A, B, D, E, F, G and H are provided for each size to simplify selection by panel hole and tube diameter. Made of corrosion-resistant stainless steel, it is suitable for applications requiring a connection through a panel.

KTPMF (BFC) Female Thread Ferrule Bulkhead Straight Connector
The KTPMF (BFC) is a female thread ferrule bulkhead straight connector in the stainless steel double-ferrule fitting range. Its double-ferrule sealing design uses front and rear ferrules to grip and seal the steel tube as the nut is tightened. It is suitable for panel mounting in instrumentation, pneumatic and hydraulic lines. The stainless steel body is corrosion-resistant and designed for long-term use in medium- and high-pressure applications. Sizes are classified by tube outside diameter (TUBE O.D.), with 11 sizes covering 6, 8, 10, 12, 14, 15, 16, 18, 20, 22 and 25 mm, with corresponding codes such as BU-6-0 and BU-25-0. The catalog lists the key A, B, D, E, F, G and H dimensions for each size, along with panel mounting parameters: PANEL HOLE SIZE (11.5~33.2 mm) and MAX PANEL THICK (maximum panel thickness, 10.2~26.0 mm), to aid panel hole design and nut and washer selection.

KTPL (ME) Ferrule Elbow
The KTPL (ME) ferrule elbow is part of the stainless steel twin-ferrule fitting series. It uses a twin-ferrule seal to connect tubing to a PT-NPT male threaded port at an angle in instrumentation lines, hydraulic systems, and pneumatic systems. The catalog lists a PT-NPT male thread size of 1/8 and models from ME-3 to ME-22, covering various tube outside diameter and connection combinations. Installation dimensions A–H are provided to aid selection and piping layout. The media used must be compatible with stainless steel and the ferrule seal.

KTPLF (FE) Female Elbow Tube Fitting
The KTPLF (FE) series female elbow tube fittings are stainless steel twin-ferrule fittings designed for 90° connections between tubing and PT-NPT threaded ports in instrument lines. The catalog offers metric tube outside diameters of 6~25 mm and imperial sizes of 1/4~3/4 in, with threaded port sizes from 1/8~3/4 in. Overall and installation dimensions A, C, D, E, F, G and H are listed for each size in mm. The stainless steel body provides corrosion resistance, reliable sealing and convenient repeated assembly and disassembly. These fittings can be used in hydraulic, pneumatic, instrumentation and analytical piping systems. Order by combining the tube outside diameter code with the PT-NPT thread size code, for example FE-6-1 or FE-02-1.

KTPB (MBT) Ferrule Male Branch Tee
The KTPB (MBT) series ferrule male branch tee is a stainless steel twin-ferrule fitting used to connect a tube branch to a female threaded port. Its twin-ferrule sealing design provides high-pressure resistance, corrosion resistance and reliable sealing for instrumentation, hydraulic and gas lines. It is made of stainless steel, typically 316/304. Available tube outside diameters are 4, 6, 8 and 10mm, with PT/NPT thread sizes of 1/8, 1/4, 3/8, 1/2 and 3/4. The model code consists of the base model MBT, tube outside diameter and thread size code. For example, MBT-6-2 indicates a tube outside diameter of 6mm and a 1/4 thread. Dimensional parameters include A, B, C, D, E, F, G, H, J and K, in mm.

GIHO-K...DO
The GIHO-K...DO series of maintenance-required rod end spherical plain bearings is designed for hydraulic components and features an internal thread and locknut. The rod end body is available with a left- or right-hand internal thread and consists of a GE...ES or GE...ES 2RS radial spherical plain bearing fitted into the rod end body. It features a locking slot and set screw, and the rod end body has a lubrication hole or grease fitting. Suitable for hydraulic system connections that require frequent adjustment and must withstand heavy loads.

Stainless Steel Double Ferrule Fittings Series
The stainless steel double ferrule fittings series consists of 316 stainless steel tube fittings with a front and rear ferrule sealing structure. The nut compresses the ferrules, causing the tube to contract radially for a reliable seal. These fittings offer high pressure and corrosion resistance, vibration resistance, resistance to loosening, and good reassembly capability. The series covers metric and fractional tube sizes (approximately 3~40mm and 1/8"~2") and includes male straight connectors (MRT), straight unions (U), elbows and tees (UT/UE), reducing tees (UCR), weld elbows (UCR/EBW), straight weld connectors (ODBW), tube caps (C), ferrule nuts (N), front/rear ferrules (FF/BF), and check valves (KTCVC). The operating temperature is -23~190°C, and the maximum working pressure for the check valve is 414 bar(6000 psig). They are widely used in petrochemical, semiconductor, instrumentation tubing, hydraulic, and high-purity fluid applications.

KTPV (UE) Ferrule Union Elbow
The KTPV (UE) ferrule union elbow is a 90° stainless steel double-ferrule fitting for connecting two tubes at a right angle. Its double-ferrule design uses a nut to compress the front and rear ferrules, elastically deforming the tube wall to create a seal. It requires no welding, is easy to install and remove, and resists high pressure and corrosion. It is suitable for instrumentation, fluid, pneumatic and hydraulic piping systems. Compatible tube outside diameters include 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22 and 25mm, as well as 1 inch. The main dimensions are A, D, E, F, G, H and J (in mm). Part numbers follow the format UE/UT-tube outside diameter-variant. Common materials are 316/304 stainless steel.

KTPE (UT) Series Ferrule Tee Fittings
The KTPE (UT) series consists of twin-ferrule equal tee fittings for three-way branch connections in rigid tubing systems, including stainless steel and carbon steel tubing. The front and back ferrules grip the tube with two cutting edges to create a metal-to-metal seal. These fittings resist high pressure, vibration and temperature cycling, and can be repeatedly assembled and disassembled without welding. Common tube outside diameters include 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22 and 25 mm, as well as 1 inch, for metric and imperial tubing. Bodies are commonly made of 316/304 stainless steel, with brass and carbon steel versions also available. The catalog lists overall and installation dimensions A, D, E, F, G, H, J and K for each tube outside diameter to facilitate tubing design and clearance checks. Suitable media include oil, water, gas and generally corrosive fluids. Applications include semiconductor equipment, analytical instruments, hydraulic and pneumatic systems, petrochemical installations, and food and pharmaceutical processing lines. Select the model according to tube outside diameter, such as UE-6-0 or UE-8-0, and confirm the thread specification and material as required.

KTPEG (RUT) Ferrule Branch-Reducing Union Tee
KTPEG (RUT) series branch-reducing union tees feature a twin-ferrule design for connecting stainless steel tubing and offer high-pressure and corrosion resistance. Available for tube outside diameters from 1/4 inch to 1 inch or 25mm, their reducing design connects tubing of different sizes. The twin-ferrule design provides a reliable seal and allows easy installation without welding. They are widely used in instrumentation tubing systems in the petroleum, chemical, power generation, and water treatment industries. Dimensional parameters include A, D1, D2, E, F, G1, G2, and H to ensure a precise fit.

KTPEW (UBW) Ferrule Weld Elbow
The KTPEW (UBW) ferrule weld elbow is part of a stainless steel double-ferrule fitting series, designed for right-angle turns and welded connections in instrumentation tubing. Its double-ferrule sealing design fits metal tubing with outside diameters of 1/8–1 inch. The weld-end elbow maintains a seal under high pressure, vibration, and temperature fluctuations. The catalog provides dimensions A, B, E, H, I, and L1 for layout and installation. Made of stainless steel, it is suitable for piping requiring corrosion resistance in petrochemical, instrumentation, hydraulic, and pneumatic systems. Catalog numbers range from UCR-01-0 to UCR-08-0 according to tube outside diameter.

KTEBW (EBW) Ferrule-to-Weld Elbow
KTEBW (EBW) series ferrule-to-weld elbows are stainless steel twin-ferrule fittings that connect tubing to welded steel pipe with a 90° change in direction. The twin-ferrule sealing design connects to tubing at one end and has a weld connection at the other, allowing the tube end to be sealed without welding. Ten sizes are available for tube outside diameters from 1/8″ to 1″. Typically made of 316/304 stainless steel, they offer pressure and corrosion resistance for instrumentation lines, hydraulic and pneumatic systems, and high-purity piping. Select the fitting to match the tube outside diameter and connection size. Note: The catalog numbers in the catalog table are listed as UCR-xx-x, which differs from the EBW series designation. They are reproduced here as originally listed.

KTCVC Series Check Valves
KTCVC series check valves use a resilient seal seat to provide reliable one-way flow and prevent backflow in piping systems. Maximum working pressure is 414 bar (6000 psig), and operating temperature ranges from -23°C to 190°C (-10°F to 375°F). Bodies are available in 316 stainless steel (ASTM A479) or brass (C36000/B16). The bonnet and sleeve are made of the same material as the body, and the spring is 302 stainless steel (A313). O-rings are fluorocarbon FKM for 316 stainless steel bodies and nitrile rubber for brass bodies. Four cracking pressure ranges are available: 0-3, 3-7, 7-15 and 15-30 psig, corresponding to identification numbers 1, 5, 10 and 25. YDF-LOK double-ferrule end connections are available in imperial sizes from 1/8 to 1 inch and metric sizes from 6 to 32 mm. CV values range from 0.16 to 4.48, with a choice of end connections and body materials.

KTBVJ Series Hexagonal Ferrule Ball Valve
The KTBVJ series hexagonal ferrule ball valve is a stainless steel instrumentation valve with twin-ferrule fittings. Its hexagonal body connects to tubing via twin ferrules for on/off control of media in automation equipment, instrumentation lines, and fluid systems. The catalog lists metric tubing sizes from Φ3×0.5 to Φ20×1, as well as imperial and mixed sizes such as Φ1/8×0.5 and Φ3/4(19.05)×1, with corresponding order numbers 769378~769394. When selecting a valve, verify the tubing outside diameter, wall thickness, and end connection type. During installation, tighten in accordance with twin-ferrule fitting specifications to ensure a leak-tight seal.

RA Type Male-Female Adapter
The RA type male-female adapter is a straight transition fitting with a male thread at one end and a female thread at the other. It connects different thread sizes in pneumatic, hydraulic and fluid lines. Thread sizes include PT/NPT 1/8, 1/4, 3/8, 1/2, 3/4 and 1. Model numbers consist of RA followed by the thread codes for both ends (e.g., RA-01-01). Key dimensions are overall length A, minimum bore E and hex width across flats F. A is approximately 27~49mm, the minimum bore is 5~15mm, and the width across flats is 14~40mm. The fitting is typically made of brass. The same catalog page also lists RHCG type female-threaded couplings and female-threaded reducing elbows, which have different configurations and are not part of this series.

RHCG Female-to-Male Threaded Adapter
The RHCG female-to-male threaded adapter connects piping with different thread sizes at the female (P) and male PT/NPT ends. It is suitable for hydraulic, pneumatic and general industrial piping systems. The catalog lists RHCG-01, RHCG-02, RHCG-03, RHCG-04, RHCG-06 and RHCG-08 models. P thread sizes range from 1/8 to 1, male PT/NPT thread sizes from 1/8 to 1/4, dimension A from 25 to 49 mm, minimum bore E from 8 to 29 mm, and hex width across flats F from 14 to 40 mm. Select the model based on the thread sizes at both ends and the available installation space.

GK...CK
The GK...CK series comprises maintenance-required rod end spherical plain bearings for hydraulic components, with an internal thread and locknut. The rod end body is available with a left- or right-hand internal thread and consists of a GE...LO radial spherical plain bearing and a rod end housing with a clamping slot and set screw. The rod end housing has a lubrication hole or grease nipple. The series is available with bore diameters from 12 mm to 125 mm, thread sizes from M12×1.25 to M100×3.0, dynamic loads from 10.8 kN to 950 kN, and static loads from 24.5 kN to 1,430 kN. The model designation follows the format GK[bore diameter]CK, for example, GK 12 CK. Add “L” to models with a left-hand thread, such as GKLL 12 CK. Models marked with an asterisk (GK 12 CK*) cannot be lubricated. Suitable for power-transmission connections in hydraulic systems.

RHCG Series Female Reducing Elbow Adapters
The RHCG female reducing elbow adapter connects two threaded pipes at a 90° angle. Both ends have female threads, making it suitable for adapting threaded connections in pneumatic, hydraulic and general piping systems. The catalog specifies P-end thread sizes of 1/4~1 inches and mating-end PT/NPT sizes of 1/8~3/4 inches, along with overall length A of 32~49 mm, minimum bore E of 8~23 mm and hex width across flats F of 17~40 mm. The product code consists of RHCG followed by two two-digit segments: the first identifies the P-end thread size (02=1/4, 03=3/8, 04=1/2, 06=3/4, 08=1), and the second identifies the thread size at the other end (01=1/8, 02=1/4, 03=3/8, 04=1/2, 06=3/4). The same page also lists similar products, including RA male-to-female adapters and RHCG female couplings. Select the fitting to match the thread sizes at both ends.

Transition Fittings
Transition fittings connect and adapt different thread sizes, thread types (PT/NPT), or male and female threads in piping systems. They are commonly used in pneumatic, hydraulic, and fluid lines. This series includes RB reducing bushings (male-to-female connections of different sizes), MET male elbows, E female elbows, SE male-to-female elbows, T female tees, and MT male tees. Six thread sizes are available: 1/8, 1/4, 3/8, 1/2, 3/4, and 1. Model numbers consist of a type code and a size code, such as RB-02-01, MET-02, E-02, SE-02, T-02, and MT-02. Selection parameters include the thread sizes at both ends, overall dimensions, minimum bore, and width across flats. Choose according to the pipe bore and available installation space. Materials and surface finishes depend on the supplied specifications.

RB Type Reducing Nipple
The RB type reducing nipple is a male-to-male reducing adapter with PT/NPT male threads at both ends. It directly connects different pipe thread sizes, providing transitions from 1/8 to 1 inch. The catalog lists 13 common sizes, from RB-02-01 to RB-08-06, by P and P1 end combinations. It also specifies overall length E (20~35 mm), minimum bore F (7~22 mm), and hex width across flats (14~35 mm) to aid selection and installation. The product is suitable for reducing connections in pneumatic, hydraulic, and general fluid piping systems.

MET Series Male Elbows
The MET male elbow is an adapter fitting for 90° turns in piping, with PT/NPT male threads at both ends (MALE×MALE, double male). The catalog lists six thread sizes—1/8, 1/4, 3/8, 1/2, 3/4, and 1—corresponding to models MET-01, MET-02, MET-03, MET-04, MET-06, and MET-08. The last two digits of the model number increase with thread size. Key dimensions include the thread sizes P/P1 at both ends, opening size E (5~21mm), and width across flats S (19.8~45.2mm). Select the model according to the pipe thread size, then check the opening and width across flats against the available installation space. This series can be combined with other adapter fittings on the same catalog page, including RB bushings, E female elbows, SE male-female elbows, T female tees, and MT male tees, to form a complete piping connection solution.

E-Type Female Elbow
The E-type female elbow is an adapter fitting used to connect two pipe sections at a right angle. Both ends have female PT/NPT threads. The catalog lists models E-01, E-02, E-03, E-04, E-06, and E-08 in nominal sizes of 1/8, 1/4, 3/8, 1/2, 3/4, and 1 inch, respectively, with different E dimensions and L lengths. The fitting is suitable for pneumatic, hydraulic, and general industrial piping. Select the appropriate thread size for installation, and ensure proper sealing and tightening torque. Dimensions in the table are in mm, and thread types are PT/NPT.

SE Series Male-to-Female Threaded Elbow
The SE series male-to-female threaded elbow is a 90° adapter with a male thread on one end and a female thread on the other. It changes the direction of air, water, oil, and other fluid lines while providing a threaded transition. The series is available in six thread sizes: 1/8, 1/4, 3/8, 1/2, 3/4, and 1, corresponding to models SE-01, SE-02, SE-03, SE-04, SE-06, and SE-08. The catalog lists E (bore), L (length), and S (hex across flats) dimensions for each size to facilitate selection and space checks. Compact and easy to install, these elbows are suitable for factory automation pneumatic systems and general-purpose fluid lines.