product — Page 65

ROB Series Hydraulic Cylinders

ROB Series Hydraulic Cylinders

The ROB series hydraulic cylinders are hydraulic actuators from Shansi Automation (Ningbo) Group Co., Ltd., designed for linear push-pull, clamping, and ejection operations in molds, machine tools, fixtures, and automation equipment. Cylinder bore and stroke are the primary selection parameters. The piston rod thread is available in five sizes: M8×1.25, M10×1.25, M14×1.25, M16×1.25, and M22×1.25. Different rod-end and mounting accessory configurations accommodate a range of installation methods, including flanges and clevises. When ordering, specify the model, rod thread type, cylinder bore, stroke, rod-end mounting type, and mounting accessory type in that order, as indicated in the model designation, to ensure compatibility between the cylinder body, rod-end thread, and mounting interface. Wrench clearance dimensions A, B, C, D, E, J, H, and R for the corresponding threads are specified by cylinder bore to facilitate installation and maintenance.

HSG Series Hydraulic Cylinders for Construction Machinery

HSG Series Hydraulic Cylinders for Construction Machinery

HSG series hydraulic cylinders are actuators used to provide linear reciprocating motion and transmit force in construction machinery, metallurgical equipment, mining equipment, and water conservancy equipment. They typically consist of a cylinder barrel, piston, piston rod, end caps, guide sleeve, and seals. They offer a compact design, high load capacity, high-pressure resistance, and reliable sealing. When selecting a cylinder, specify parameters such as bore diameter, rod diameter, stroke, mounting type, port location, and operating pressure. The ordering model is formed by combining the code segments following HSG.

RB and RBC Series Hydraulic Shock Absorbers

RB and RBC Series Hydraulic Shock Absorbers

RB and RBC series hydraulic shock absorbers absorb impact energy from moving parts in automated equipment, reducing noise and vibration while protecting equipment, fixtures, and workpieces. Standard catalog models include RB0604, RB0805, RB0806, RB1006, RB1007, RB1411, RB1412, RB2015, and RB2725, with maximum energy absorption of approximately 0.5~147 J and strokes of 4~25 mm. Smaller models are suitable for light loads and short strokes, while larger models are designed for heavy loads and high-impact conditions. Selection should take into account impact energy, stroke, impact velocity, mounting method, and environmental conditions.

ST Linear Bearings

ST Linear Bearings

ST series linear bearings are available in standard (UU) and extended (UUB) versions, with bore sizes ranging from 8 to 100 mm. Made from high-quality steel, they offer high rigidity, high load capacity and a long service life. Maximum travel ranges from 14 to 144 mm; basic dynamic load ratings range from 0.27 to 43.9 kN, and static load ratings from 17 to 2,940 kN. Suitable for automation equipment, machine guides and other applications. Nickel-plated versions are available on request.

AC Series Self-Compensating Shock Absorbers

AC Series Self-Compensating Shock Absorbers

AC series self-compensating shock absorbers absorb impact energy and reduce vibration and noise in industrial automation equipment. They provide end-of-stroke cushioning for cylinders, slides, conveyor lines, and similar equipment. The self-compensating design accommodates a range of impact speeds. The externally threaded body ranges from M6×1 to M36×1.5, with strokes of 5~80 mm. The catalog lists models AC0806, AC1005, AC1008, AC1210, AC1412, AC1416, AC1420, AC2016, AC2020, AC2030, AC2050, AC2525, AC2550, AC2580, AC2540, and AC3660, with overall dimensions A~I provided for installation and selection.

AC/AD Series Shock Absorbers

AC/AD Series Shock Absorbers

AC/AD series shock absorbers (industrial hydraulic shock absorbers) absorb impact energy and reduce noise and vibration in automation equipment, at cylinder end positions, and on conveyor lines. AC denotes the self-compensating type (no adjustment required), while AD denotes the adjustable type (damping force can be adjusted to the load). Model numbers consist of the series code (AC/AD) + outside diameter (2 digits) + impact stroke (2 digits). For example, AC1416 indicates an outside diameter of 14mm and a stroke of 16mm. Nominal thread sizes range from M6×1 to M36×1.5, with impact strokes of 5~80mm. The catalog lists overall dimensions A~I for each model to assist with installation and selection.

AD Series Hydraulic Shock Absorbers

AD Series Hydraulic Shock Absorbers

AD series adjustable hydraulic shock absorbers absorb impact energy from moving machinery for smooth deceleration and precise positioning. A multi-orifice throttling structure provides hydraulic damping, and the damping force can be adjusted continuously to suit the load and impact velocity. AC self-compensating models are also available and require no adjustment. Outer diameter sizes range from M14~M64, including the large UNF 2-1/2-12 size. Impact strokes range from 10~150mm, maximum impact velocities are approximately 1.5~4.5m/s, and the operating temperature range is -10~80℃. They can accommodate impact energy from applications ranging from small pneumatic cylinders to heavy-duty mechanisms handling large loads. Model numbers combine the series code (AD adjustable/AC self-compensating), outer diameter, impact stroke, impact velocity (1 high speed/2 medium speed/3 low speed), and cap option (blank with cap/N without cap). Standard model components are written consecutively, as in AD1410 (outer diameter 14, stroke 10). They are widely used for end-of-travel cushioning and collision protection in automated equipment, conveyor lines, machine tools, packaging machinery, and lifting equipment.

AD Series Adjustable Hydraulic Shock Absorbers

AD Series Adjustable Hydraulic Shock Absorbers

The AD series consists of adjustable hydraulic shock absorbers designed to absorb impact and reduce noise at the end of travel in automated equipment, conveyor lines, pneumatic cylinders, robotic arms, and similar applications. Damping force can be adjusted for different impact speeds, with high, medium, and low settings available. The shock absorber assembly is available with or without a damping cap (N). Key specifications include an outside diameter of 14~64 mm, threads from M14×1.5~M42×1.5 and UNF2 1/2-12, a stroke of 10~150 mm, maximum energy absorption of approximately 20~36000 J, a maximum impact speed of approximately 1.5~4.5 m/s, and an operating temperature of -10~80 ℃. The table lists standard models including AD1410, AD2016, AD2525, AD3625, AD4225, AD4250, AD4275, and AD-64050. Only dimensional data is provided for some models.

SR Series Linear Modules

SR Series Linear Modules

The SR series is a range of linear modules (slides) from SNS Automation (Ningbo) Group Co., Ltd. It includes five models classified by effective stroke: SR15, SR30, SR60, SR80, and SR100. All models share the same cross-sectional profile and mounting interfaces. The model numbers correspond to their maximum strokes of 15, 30, 60, 80, and 100 mm, respectively. The series has an operating temperature range of 0-60℃, maximum loads ranging from 15-350 kgf, and body weights of approximately 470-765 g, increasing with model size. Two key mounting and overall length dimensions are specified: A is 151/202/286/337/390 mm, and B is 136/172/225/256/290 mm. These dimensions can be used to check available installation space and select a model. The modules are suitable for short-stroke reciprocating linear motion in automated applications such as electronics assembly, packaging, and inspection. Select a model according to the required stroke, installation space, and load, and machine mounting holes according to the dimensional drawings in the catalog.

A Series Booster Cylinder

A Series Booster Cylinder

The A series booster cylinder (air-over-oil booster cylinder) is a double-acting cylinder powered by 4-7kg/cm² compressed air. It converts pneumatic power to hydraulic power to produce a high-pressure output force of 1-100 tons. It uses VG68# anti-wear hydraulic oil, with an operating temperature of 0-60℃, operating speed of 50-400mm/s, pressure resistance of 300kg/cm², torque of 12kg/cm², and operating frequency of 25-45 cycles/minute (inversely proportional to stroke length). Its practical design makes maintenance easy, while delivering high force and smooth, fast operation. It is suitable for pressing, bending, punching, forming, forging, deburring, assembly, printing and other operations. It is designed for upright mounting and delivers the same force with the front shaft pointing downward. Custom specifications are available. Standard bore diameters range from 63-180mm, with output forces from 1-60 tons.

DTC 1-40T Series Air-Oil Booster Cylinders

DTC 1-40T Series Air-Oil Booster Cylinders

The DTC 1-40T series comprises double-acting air-oil booster cylinders driven by 4-7kg/cm² compressed air and using VGG68# anti-wear hydraulic oil to deliver high-pressure output from 1-40 tons. They are suitable for extrusion, sawing, punching, forming, riveting, deburring, assembly, and printing. The stroke can be adjusted to suit the machine and die height. The cylinders are mounted upright, with the front shaft exerting force downward. Operating temperature is 0-60℃, operating speed is 50-400mm/s, and operating frequency is 25-45 cycles/min. Stroke tolerances are approximately +1.00/0.00mm and +0.20/0.00mm, respectively. Bore diameters include 63, 80, 100, 125, 150, and 160mm, with multiple power stroke options and adjustable power strokes available.

LMGA Series Linear Bearings

LMGA Series Linear Bearings

The LMGA series comprises metal-retainer linear bearings available in standard, adjustable-clearance (AJ), and open (OP) types. Bore diameters range from 6 to 120 mm, outside diameters from 12 to 180 mm, with 3–8 ball rows and weights from 8 to 15,000 g. Designed for linear motion systems, they offer high precision and rigidity. Nickel-plated versions are available by custom order; please allow lead time.

LM M-Type Stainless Steel Linear Ball Bearings

LM M-Type Stainless Steel Linear Ball Bearings

LM series M-type stainless steel linear ball bearings have bore diameters ranging from 3 to 40 mm. Made of stainless steel, they are suitable for corrosive environments and applications requiring corrosion resistance. The standard range includes 15 sizes, with 4–6 rows of balls. These bearings are lightweight and offer high load capacity. Available in two accuracy grades—precision (P) and high precision (H)—they meet a variety of application requirements. Common applications include automation equipment, precision machinery, and medical devices.

VP Series Solenoid Valves

VP Series Solenoid Valves

The VP series consists of 2-position, 3-way pilot-operated solenoid valves, including the VP342 (port size PT1/4, effective area 16mm², CV=1.0) and VP542 (port size PT3/8, effective area 44mm², CV=2.1). They use internal or external pilot actuation and have an operating pressure range of 0.2~0.8MPa, a proof pressure of 1.5MPa, and an operating temperature range of -10~50°C (without freezing). The body is made of aluminum alloy and requires no lubrication. Maximum operating frequency is 5 cycles/second, and response time is less than 0.05 seconds. Protection rating is IP65 (DIN40050), and heat resistance is Class B. G or NPT port threads and DIN connector or lead-wire wiring are available. The standard voltage is AC220V, with several other voltage options. The valves offer reliable sealing, quick response, high flow, and a manual override. They can be integrated with a manifold to save installation space.

VF Series Solenoid Valves

VF Series Solenoid Valves

VF series solenoid valves are pneumatic directional control valves for use with air. They are available in two-position and three-position configurations, with single or double coils and center functions including closed center, exhaust center, and pressure center. The port size is 3/8, with an effective area of 36~45 mm², an operating pressure of approximately 0.1~0.9 MPa, a response time of ≤30 ms (two-position) or ≤50 ms (three-position), and a maximum operating frequency of 5 cycles/second or 3 cycles/second. Coils are available with direct leads (G) or a DIN connector (D), with standard voltages of AC110V/220V(50Hz) and DC12V/24V, Class B insulation, power consumption of 5.6VA/3.4VA or 1.8W/2W (with indicator light), and a surge suppressor. Common specifications include a maximum ambient and fluid temperature of 50℃, no lubrication required, a screwdriver-locking manual override, 30G/5G shock/vibration resistance, and dustproof seals. Models range from VF5120-△B-02 to VF5520-△B-02.

KF/AM Rotary Ball Spline Series

KF/AM Rotary Ball Spline Series

The KF/AM Rotary Ball Spline Series is a high-precision, high-rigidity linear motion transmission component designed for combined rotary and linear motion applications. The series includes two types: KF (flange with through-holes) and AM (flange with tapped holes). Shaft diameters range from 16 to 40 mm, and all models feature four rows of balls, providing high load capacity and reliability. It is widely used in industrial robots, automation equipment, machine tools, and other applications requiring precise guidance.

SCS Linear Motion Unit Block Series

SCS Linear Motion Unit Block Series

This series of linear motion unit blocks supports and guides linear motion and is designed for use with linear bearings. Model numbers begin with SCS, followed by the shaft diameter and the UU suffix. There are 13 sizes, from SCS6UU to SCS60UU, for shaft diameters of 6–60 mm. The blocks feature aluminum alloy or steel bodies, standardized mounting dimensions, high rigidity, and high load capacity. The table provides detailed key dimensions (T, h, E, W, L, F, G, B, C, K, S₁, S₂, L₁), compatible linear bearing models, basic dynamic and static load ratings, and weight. They are suitable for linear motion systems in automation equipment, machining, packaging machinery, and other applications.

TWSY Series Solenoid Valves

TWSY Series Solenoid Valves

The TWSY series is a range of pneumatic solenoid valves (valve bodies) available in four sizes: 3000, 5000, 7000, and 9000. These cover pneumatic control circuits with medium-low to high flow rates. Side mounting brackets, models SX3000-16-A, SX5000-16-A, and SX7000-16-A, are available to secure the valve bodies to a base plate, manifold, or equipment frame. No bracket is offered for the 9000 size because of its different valve body construction. When selecting a valve, first determine the 3000/5000/7000/9000 size based on the required flow rate and port size, then select the corresponding bracket for the mounting method or choose a valve body without a bracket. The catalog lists only the available sizes and their matching bracket models. Details such as coil voltage, valve function (5-port, 2-position/5-port, 3-position), and port thread type must be confirmed in the detailed specifications.

SBR Series Linear Slide Units

SBR Series Linear Slide Units

SBR series linear slide units consist of a slide block and a support shaft. The slide block works with a linear bearing to provide low-friction linear motion. Slide block models range from SBR16LUU to SBR50LUU, while support shaft models include SBR12 to SBR50 and TBR16 to TBR30. Available in a range of shaft diameters (Φ12–Φ50 mm), the slide blocks have basic load ratings of 1,548–7,640 N (dynamic) and 2,360–15,880 N (static). Support shafts are available in standard lengths up to 6,000 mm. Suitable for linear guide systems in automation equipment, machine tools, industrial robots, and other applications.

TW/DB Series Universal and Bottom Plug-in Valve Manifolds

TW/DB Series Universal and Bottom Plug-in Valve Manifolds

TW/DB series universal and bottom plug-in valve manifolds provide centralized mounting for multiple solenoid valves. The universal type uses a conventional manifold base with an optional wiring module, offering versatility at a low cost. The bottom plug-in type features a custom base plate and an attractive, integrated all-aluminum alloy design. Compatible with solenoid valves including FESTO VUVG-L10/LK10 and VUVG-L14/LK14, SMC SY3□20/SY5□20/SY7□20, AirTAC 4V100M/4V200M, and CKD 4GD1/4GD2. Rated voltage: DC24V. Available with single- or double-solenoid control and 04-24 stations. Single-solenoid configurations support up to 24 stations and double-solenoid configurations up to 12 stations; A+B≤24 must also be satisfied.

VFA Series 5-Port Air-Operated Directional Valves

VFA Series 5-Port Air-Operated Directional Valves

The VFA series consists of 5-port air-operated (pneumatic pilot) directional valves. Pilot air pressure shifts the valve spool, making these valves suitable for pneumatic circuits without electrical power or where explosion protection is required. The series comes in two body sizes: type 30 and type 40/50. Type 30 has a PT1/4 port size and an effective area of 18mm² (Cv=1), and is available in four configurations: 2-position single pilot, 2-position double pilot, 3-position single pilot, and 3-position double pilot. Type 40/50 has a PT3/8 port size and an effective area of 45mm² (Cv=2.5), and is available in 3-position single-pilot and double-pilot configurations. The operating pressure range is 0.15~0.9MPa (1.5~9kgf/cm²), and the pilot pressure range is the same. Select the model according to the required number of positions (2-position/3-position), control method (single pilot/double pilot), and port size (PT1/4, PT3/8).

TBR Linear Slide Unit Series

TBR Linear Slide Unit Series

The TBR series is a support rail range for linear slide units, suitable for applications such as automation equipment and machining. It includes four models: TBR16, TBR20, TBR25, and TBR30, with shaft diameters of 16 mm, 20 mm, 25 mm, and 30 mm, respectively. Rails are available in various standard lengths (such as 190, 340, 640, and 940 mm), with a maximum supported length of 6,000 mm. The rails have a trapezoidal cross-section and fixed mounting-hole spacing (N = 20 or 25 mm; P = 150 or 200 mm), and weigh 2.56–8.28 g per meter. When paired with TBR...UU or SCJ...UU blocks, they provide high-precision linear motion. Made from bearing steel with a hardened surface, the rails offer high rigidity and wear resistance.

TSV Series Hand Lever Valves

TSV Series Hand Lever Valves

TSV series hand lever valves are manually operated, direct-acting pneumatic directional control valves with aluminum alloy bodies. They are available in 5-port, 2-position (TSV86522) and 3-port, 2-position (TSV98322) configurations. Both have PT1/4 ports, an effective area of 18mm² (Cv=1.00), and use air filtered to 40μm or finer. The operating pressure range is 0~0.8MPa (0~145psi), the proof pressure is 1.5MPa (215psi), and the operating temperature range is -20~70℃. Lubrication is not required; however, if lubrication is used, it must be continued without interruption. ISO VG32 or equivalent oil is recommended. The compact valves provide a positive lever feel and reliable positioning, making them suitable for equipment commissioning, manual direction switching, and air circuit on/off control. G and NPT pipe threads are available. Select the model according to the port and position configuration (5-port, 2-position or 3-port, 2-position) and thread type.

SCJ Series Slider Line

SCJ Series Slider Line

The SCJ series comprises sliders for linear slide units, designed for use with linear bearings in linear motion guiding applications. These products offer high load capacity and low friction, making them suitable for a wide range of applications, including automation equipment and machining. Models include variants such as SCJ...UU. For exact dimensions and load ratings, please refer to the detailed tables in the catalog.

MV Series 3-Port, 2-Position Mechanical Valves

MV Series 3-Port, 2-Position Mechanical Valves

The MV series consists of direct-acting 3-port, 2-position mechanical valves. A button, roller or knob directly moves the valve spool to switch the valve, eliminating the need for a solenoid pilot. These valves are suitable for manual operation, workpiece detection, fixture positioning and similar applications. Port sizes are G1/8 (port size code 1) and G1/4 (code 2); position code 32 denotes a 3-port, 2-position valve. Actuator options include basic (blank), roller (R), selector knob (TB), locking button (EB), flat button (PP), raised button (PPL) and large round button (PB), meeting a range of operating and installation requirements. Standard specifications: air filtered through a 40μm filter; direct-acting operation; operating pressure 0-0.8MPa (0-114psi); operating temperature -5-60℃ (28-140℉); no lubrication required.

VM Series Pneumatic Valves

VM Series Pneumatic Valves

The VM series pneumatic valves include basic (base-piping) models such as VM132-M5-00A and VM133-M5-00A, designed for directional control in air and inert gas lines. The operating pressure range is -100kPa~1MPa, covering vacuum to medium-pressure applications. Ambient and fluid temperatures must be between -5~60℃ (no freezing). Side-piping and bottom-piping configurations are available. The valve body has panel mounting holes for M5×0.8 screws (4mm deep) and an M14×1 lock nut (5mm thick, 17mm across flats) for panel mounting. The exhaust port is a tapered 3-way type. The required operating force is approximately F.O.F.=26N (0.5MPa, VM132)/13N (VM133), with travel of P.T.=1.5mm, O.T.=1.5mm and T.T.=3mm/60°. These valves are suitable for manual or mechanical control on compact equipment panels.

SK Linear Motion Unit Support Series

SK Linear Motion Unit Support Series

The SK series of linear motion unit supports is designed to support and secure linear bearings, offering high rigidity and easy installation. It includes 12 sizes, from SK8 to SK60, for shaft diameters ranging from 8 to 60 mm, and is suitable for a wide range of automation equipment and linear motion systems. Each model comes with a clamping bolt and a safety bolt for secure mounting. Its compact, lightweight design makes integration easy.

TAC Series Mechanical Valves

TAC Series Mechanical Valves

TAC series mechanical valves (mechanically actuated directional control valves) use a cam lever or push button to manually switch the direction of airflow in pneumatic circuits. They are available in 2-way (2-port) and 3-way (3-port) versions, both with 2 positions. The port size code is M5, with an M5×0.8 port size. The operating fluid is air, the operating pressure range is 0~0.9 MPa, the effective area is 1.8 mm², the ambient temperature range is -5~+60℃ (no freezing), and each unit weighs approximately 30 g. The model number consists of TAC + number of ports (2/3) + actuator type (V: cam lever / P: push button), for example TAC-2V and TAC-3P. Compact and requiring little operating force, these valves are suitable for manual control circuits for small cylinders, clamps, and inspection fixtures.

XQ Series Manually Operated Directional Control Valves

XQ Series Manually Operated Directional Control Valves

The XQ series manually operated directional control valves are manufactured by SNS Automation (Ningbo) Group. They manually control the flow of compressed air in pneumatic circuits to reverse, stop, and maintain pressure in actuators such as cylinders. Two port and position configurations are available: the 3-port, 2-position (3/2-way) model is suitable for single-acting cylinders or circuits requiring a separate exhaust; the 5-port, 2-position (5/2-way) model is suitable for reversing double-acting cylinders. The compact aluminum alloy valve body can be mounted directly on an equipment panel or in a pipeline. A manual handle or button allows the valve to be switched when electrical or air supply is interrupted or during equipment commissioning, simplifying fault diagnosis and maintenance. The operating medium is air filtered through a 40μm or finer filter. Operating pressure is approximately 0~1.0 MPa, proof pressure is 1.5 MPa, and operating temperature is -20~70 ℃. Lubrication is not required. These valves are widely used in automated equipment, fixtures, packaging machinery, and other applications requiring manual directional control.

FV Series Foot Valves

FV Series Foot Valves

FV series foot valves are direct-acting pneumatic directional control valves available in two models: FV320 (3-port, 2-position) and FV420 (4-port, 2-position). They are suitable for pneumatic circuits requiring foot control. The working medium is air filtered through a screen rated 40μm or higher. Port sizes are PT1/8 and PT1/4, respectively. The operating pressure range is 0~0.8MPa, the operating temperature is -5~60℃, and no lubrication is required. G and NPT port thread options are available. Their compact design allows installation at the base of equipment or in the foot-operated area of a workstation, enabling hands-free start, stop, and directional control.

MS Series Hand-Pull Valves

MS Series Hand-Pull Valves

MS series hand-pull valves are two-port, two-position, direct-acting pneumatic valves for manual on/off and directional control in air lines. The aluminum alloy body provides a large effective flow area, smooth shifting, and comfortable operation. The working medium is air filtered through a 40μm or larger filter. Operating pressure is 0-1.0MPa, proof pressure is 1.5MPa, and operating temperature is -20-70℃. No lubrication is required. Models include MS-11MF, MS-22MF, MS-33MF, MS-44MF, MS-66MF, and MS-88MF, with port sizes from PT1/8 to PT1 and effective flow areas of 23.0-392.0mm². G or NPT threads are optional, and a double female-threaded (FF) version is also available.

KLA Series One-Way Flow Control Valves

KLA Series One-Way Flow Control Valves

The KLA series one-way flow control valve consists of a check valve and a throttle valve connected in parallel. It is a combined flow control valve, also known as a speed control valve. Airflow is throttled by the throttle valve in the forward direction and passes freely through the check valve in the reverse direction. The valve is commonly used to control the speed of actuators such as pneumatic cylinders. It is typically installed between the cylinder and the directional control valve and can be used for either meter-in or meter-out control. For slow, smooth cylinder movement, meter-out control is recommended to create back pressure and improve stability. The series covers nominal diameters of 3~50mm, uses compressed air as the working medium, and operates at pressures of 0.05~0.8MPa. Both medium and ambient temperatures are 5~50℃. The valves offer low leakage and a service life of 1.5 million cycles. Model numbers consist of KLA-L followed by the nominal diameter code. Some smaller diameters have a J suffix (e.g., KLA-L3-J), while larger diameters have no suffix (e.g., KLA-L20).

ASC Series One-Way Flow Control Valves

ASC Series One-Way Flow Control Valves

ASC series one-way flow control valves, also known as speed control valves or one-way speed control valves, consist of a check valve and a throttle valve connected in parallel. In the forward direction, the throttle valve restricts flow; in the reverse direction, air flows freely through the check valve. Typically installed between a cylinder and a directional control valve, they use exhaust throttling to create back pressure, smoothing actuator motion and controlling the speed of cylinders and other actuators. The working medium is compressed air filtered through a 40μm or larger filter. The operating pressure range is 0.05~0.95MPa (7~135psi), proof pressure is 1.5MPa (215psi), and operating temperature is -20~70℃. The valve body is made of aluminum alloy. Port sizes range from PT1/8~PT1/2, with standard rated flow rates of 200~1650L/min and check valve flow rates of 400~2500L/min. G or NPT port threads are available. Three body sizes are offered: ASC100/ASC200/ASC300.

RE Series Flow Control Valve

RE Series Flow Control Valve

The RE series flow control valve (speed control valve / one-way throttle valve) regulates the operating speed of actuators, such as cylinders, in pneumatic circuits by throttling airflow. The working medium is compressed air filtered through a filter rated 40μm or greater. The operating pressure range is 0-0.95MPa (0-135psi), and the operating temperature range is -5~60℃ (28-140℉). Four port sizes are available: RE-01 corresponds to PT1/8, RE-02 to PT1/4, RE-03 to PT3/8, and RE-04 to PT1/2, covering common pneumatic lines from φ4 to larger diameters. Manufactured by SNS Automation (Ningbo) Group Co., Ltd., the valve is compact and offers responsive adjustment for speed and flow control in a variety of pneumatic systems.

SHF Series

SHF Series

SHF series support blocks (shaft supports) are designed to support and secure linear shafts with nominal diameters ranging from 10 to 60 mm. They are available in various mounting dimensions and load ratings. Their compact design makes them easy to install, and they are commonly used in automation equipment and linear motion systems in combination with SC series slide blocks. Dimensions include overall length, width, and height. Weight ranges from 27 g to 1,500 g, depending on the model.

QE Series Quick Exhaust Valves

QE Series Quick Exhaust Valves

QE series quick exhaust valves are control components used in pneumatic circuits to rapidly exhaust air from actuators such as cylinders, significantly increasing cylinder reciprocating speed. The series includes four port sizes: QE-01, QE-02, QE-03 and QE-04, with PT1/8, PT1/4, PT3/8 and PT1/2 threaded ports, respectively. The working medium is compressed air filtered through a filter rated 40μm or greater. The operating pressure range is 0-0.95MPa (0-135psi), and the operating temperature is -5~60℃ (28-140℉). The compact valve can be mounted directly on a cylinder port or at the end of a pipeline in any orientation. It provides reliable sealing, high exhaust flow and fast response, making it suitable for speed control and rapid reversal circuits in pneumatic systems used in automation equipment, packaging machinery and assembly lines. Select the appropriate port size based on the cylinder connection thread and required exhaust flow.

KLA-L Series Silencers

KLA-L Series Silencers

The KLA-L series consists of silencers for pneumatic circuits, installed at the exhaust ports of components such as cylinders and solenoid valves to reduce exhaust noise and prevent dust ingress. The series is divided by nominal size into two groups: KLA-L3-J ~ KLA-L10-J (small bore, connection sizes G1/8 ~ G3/8) and KLA-L15-J ~ KLA-L50 (large bore, connection sizes G3/4 ~ G2), covering the exhaust port sizes of common pneumatic actuators. Selection is based primarily on overall and mounting dimensions: connection thread d, inner diameter d1, overall length L, body lengths L1/L2/L3, width across flats B, overall height Hmax, corner radius/head dimension R, and H/H1/H2. For the small-bore series, H, H1 and H2 indicate height and hex dimensions; for the large-bore series, Hmax and R indicate the maximum outside diameter and end corner radius. Screw the silencer directly into the matching exhaust port thread, ensuring that the exhaust path is unobstructed. This page provides overall dimensions in millimeters. For operating pressure, temperature and other media parameters, refer to the corresponding specification page for this series.

YDQ Series Quick Exhaust Valve

YDQ Series Quick Exhaust Valve

The YDQ series quick exhaust valve is an auxiliary component installed between the cylinder and the directional control valve in a pneumatic system. When the cylinder exhausts, it allows air to escape quickly through the exhaust port instead of passing through the directional control valve, greatly increasing cylinder extension and retraction speeds, particularly in systems with long piping. The valve has a direct-acting design: P is the inlet port (connected to the directional control valve output), A is the outlet port (connected to the cylinder), and O is the exhaust port (connected to a silencer). The working medium is air filtered through a 40μm or larger filter screen. The proof pressure is 1.5MPa and the maximum operating pressure is 1.0MPa. Two valve spool options are available: wear-resistant (5~60℃) and low-temperature-resistant (-35~60℃). Nominal port sizes range from 1/8~1 inch (G1/8~G1), with an effective area of 25~135mm², a flow rate of 0.5~6.6m³/min, and a switching time of ≤0.01~0.06s.

ST Series Shuttle Valves

ST Series Shuttle Valves

ST series shuttle valves, also known as two-way selector valves, are pneumatic control components with two inlets and one outlet. They automatically select and output the higher pressure signal for pressure signal selection and logic control in cylinders and pneumatic circuits. The series includes four models, ST-01~ST-04, with port sizes G1/8, G1/4, G3/8 and G1/2, effective areas of 7.5~60 mm², operating pressure ranges from 0~0.95 MPa to 0~7.5 MPa, and proof pressures of 1.5~15 MPa. Operating temperatures are -5~60℃ for ST-01 and -20~70℃ for ST-02~ST-04. Their compact bodies are easy to install in automated equipment pneumatic systems.

KA Series Check Valves

KA Series Check Valves

KA series check valves are directional control components that allow airflow in one direction and prevent reverse flow in pneumatic systems. The working medium is air filtered through a 40μm or finer filter. The operating pressure range is 0.15~0.8MPa (21~114psi), the proof pressure is 1.5MPa, and the operating temperature range is -20~70℃. The series includes 6 sizes, with connection ports from G1/8 to G1 and effective areas of 10~190mm² that increase with port size to suit pneumatic circuits with different flow requirements. The valves have threaded connections, a compact design, and are easy to install. They can be used with cylinders, solenoid valves, and other pneumatic components.

PCV Series Check Valves

PCV Series Check Valves

PCV series check valves (one-way valves) maintain pressure and form safety circuits in pneumatic systems. They prevent reverse airflow, allowing cylinders to stop instantly and achieve precise positioning. The valves feature a special circuit design and are available with a push-in pilot port (F type) to save installation space and improve installation efficiency. The working medium is air filtered to 40μm or better. Operating pressure is 0.1~1.0MPa, proof pressure is 1.5MPa, operating temperature is -20~70℃, and operating frequency is 40 cycles/min. Body size is 24.5mm, connection sizes range from PT1/8~PT1/2, and the pilot port is M5×0.8 or 1/8"~1/4". The ordering code consists of PCV and the specification code.

NRV Series Check Valves

NRV Series Check Valves

The NRV series comprises in-line pneumatic check valves (one-way valves) that control airflow in one direction and prevent backflow. They are used in pressure-holding safety circuits and for precise locking when cylinders stop instantaneously. The standard range includes six models: NRV06, NRV08, NRV10, NRV15, NRV20 and NRV25, with respective port sizes of PT1/8, PT1/4, PT3/8, PT1/2, PT3/4 and PT1. Effective areas range from 18~250 mm², with corresponding Cv values of 1.0~14.44, covering low- to high-flow pneumatic circuits. The working medium is air filtered through a 40μm or finer filter. The operating pressure range is 0.02~1.0MPa (2.9~145psi), the proof pressure is 1.5MPa (215psi), and the operating temperature is -20~70℃. The aluminum alloy body is lightweight and easy to install. In addition to standard PT threads, G and NPT threads are available to suit piping connections in different countries and regions.

ITV Series Electro-Pneumatic Proportional Valves

ITV Series Electro-Pneumatic Proportional Valves

ITV series electro-pneumatic proportional valves convert electrical signals linearly into pneumatic pressure output, enabling precise, stepless pressure adjustment in pneumatic systems. They are commonly used for tension and pressure control. Models are available in three body sizes, 1, 2, and 3 (ITV101~ITV305), and three set pressure ranges: 0.005~0.1MPa, 0.005~0.5MPa, and 0.005~0.9MPa. Minimum supply pressure is the set pressure+0.1MPa, and maximum supply pressure is approximately 0.2~1.0MPa. Supported power supplies are DC24V±10% or DC12-15V. Current consumption is ≤0.12A at DC24V and ≤0.18A at DC12-15V. ITV10□□ models can be fitted with a 品-shaped bracket or a flat bracket and can be installed inline with filter components such as the AF30-A air filter and AFM30-A oil separator. The model code is ITV+size(1/2/3)+pressure range code(01/03/05)+□ option suffix.

AF Series Air Filters

AF Series Air Filters

AF Series air filters remove water and dust from compressed air. They are often combined with AFM Series mist separators to form modular air preparation filter assemblies. The AF30-A listed in the catalog can be fitted to an inline filter assembly and installed independently or on a panel using the B310-L upper bracket and Y30, Y30L or Y40T spacers. Related pages also provide the set pressure ranges, supply voltages and connection specifications for compatible ITV electro-pneumatic proportional valves and IR precision regulators, making it easier to select components for a complete air preparation system.

AFM Series Oil Separators

AFM Series Oil Separators

AFM series oil separators are air preparation components typically installed downstream of modular filter assemblies, such as the AF30-A air filter. They provide further separation of oil mist from compressed air, supplying cleaner air to downstream pneumatic equipment. The catalog lists the AFM30-A as a representative model. It can be installed with accessories including the B310-L upper bracket, Y30 spacer, Y30L spacer with L bracket, and Y40T spacer with T bracket. The series is suitable for inline filter assemblies. Refer to the product catalog for specific port sizes, flow rates, and filtration ratings.

SC Series Linear Motion Unit Slider

SC Series Linear Motion Unit Slider

The SC Series linear motion unit slider features a linear bearing design and works with a smooth shaft to provide smooth linear movement. The series is available in 11 sizes, from SC8VUU to SC50VUU, covering shaft diameters from 8 to 50 mm, depending on the model. Key dimensions include width (W), height (H), and length. Basic dynamic load ratings range from 274 to 3,820 N, static load ratings from 392 to 7,940 N, and weights from 27 to 2,100 g. Suitable for applications requiring linear guidance, such as automation equipment, precision machinery, and industrial robots, it offers high precision, low friction, and long service life.

NITV Series Vacuum Pressure Switches

NITV Series Vacuum Pressure Switches

NITV series vacuum pressure switches detect negative pressure and control vacuum settings in vacuum systems. The standard models are NITV2090 and NITV2091. Both offer the same vacuum performance: a maximum supply vacuum of -101kPa, a vacuum setting range of -1.3~-80kPa, and a minimum supply vacuum (set vacuum) of -13.3kPa. They differ in supply voltage: NITV2090 uses DC24V±10%, while NITV2091 uses DC12~15V, accommodating different control power supplies. Mounting accessories include the KT-ITV-F2 flat bracket and the KT-ITV-L2 L-shaped bracket. See the dimensional drawings for dimensions in millimeters. These switches are suitable for vacuum pressure monitoring in automated vacuum gripping, handling, and inspection applications.

SSNS Series Pressure Switches

SSNS Series Pressure Switches

The SSNS series consists of mechanical air pressure switches (pressure relays) for pressure detection, alarms and control in pneumatic systems. The series includes ten specifications, with pressure ranges from -0.5~2 bar to 8~30 bar, differential (hysteresis) ranges from 0.2~0.7 bar to ≤10 bar, and factory settings from 1~20 bar. Maximum leak test pressure is available in two ratings: 16.5 bar and 33 bar. Very low, low, medium and high pressure models can be selected to suit operating conditions. The SSNS506M has a manual reset; all other models reset automatically. The scale is marked in both bar and psig and can be supplied in MPa, kgf/cm² or other units on request. Electrical contact ratings are AC125V 20A, AC250V 10A and DC24V 10A (non-inductive loads), and the contacts can switch inductive or non-inductive loads. Connections can be customized using suffixes: E for threaded, C for welded, S for capillary tube and B for air-cooled types. Suitable for pressure monitoring in air compressors, pneumatic control circuits, leak testing equipment and automated production lines.