product — Page 64

HFZ/HFSZ Series Pneumatic Grippers
HFZ/HFSZ series pneumatic grippers are used to grip and hold workpieces in automated equipment. They are available in three configurations: HFZ standard double-acting, HFZ single-acting normally open, and HFSZ single-acting normally closed. Bore sizes are 6, 10, 16, 20, 25, 32, and 40 mm. Mounting options include standard, side mounting (F type), and through-hole mounting (N type). The catalog lists parameters such as effective support force, closing stroke, and weight for each bore size. These grippers are suitable for tooling, handling, and positioning applications requiring compact two-finger gripping. Models include HFZ10, HFZ16, HFZ20, HFZ25, HFZ32, and HFZ40. Select a model based on bore size, operating configuration, mounting method, and required gripping force.

HFK Series Parallel Air Grippers
The HFK series consists of parallel air grippers with roller guides. Two fingers open and close in parallel along the guides, allowing workpieces to be gripped externally or held internally. The roller guides offer low friction, high rigidity and high repeatability, making them suitable for automated loading, unloading and assembly of electronics, semiconductors and automotive components. Three operating types are available: HFK is the standard double-acting type, with compressed air driving both opening and closing; HFTK is a single-acting, normally open type, whose fingers open when air supply is lost; and HFSK is a single-acting, normally closed type, whose fingers remain closed and gripping when air supply is lost, providing greater safety. The catalog uses symbols such as A, AB, B, C, CA, D, DA, DB, E and EA to identify external dimensions, making it easier to match the gripper to mounting surfaces, finger attachments and magnetic switch grooves. Selection also requires confirmation of parameters such as bore size, opening and closing stroke, gripping force, operating pressure and operating frequency.

HDM Series Cylinders
HDM series cylinders are double-acting pneumatic cylinders available in five bore sizes: 12, 16, 20, 25, and 32 mm. They use air as the operating medium, with an operating pressure range of 1.5-7 kgf/cm² (50-700 kPa), an operating temperature range of 0-60°C, and a maximum operating frequency of 100 cycles/min. Lubrication is optional. These compact cylinders are suitable for linear push-pull, clamping, and positioning applications in automated equipment. Models HDM-10, HDM-16, HDM-20, HDM-25, and HDM-32 correspond to the bore sizes listed above, respectively. Select the appropriate bore size based on the required output force.

HDM Series Pneumatic Grippers
The HDM series consists of double-acting pneumatic grippers with aluminum alloy bodies and alloy steel jaws and main shafts, designed for gripping and positioning workpieces in automated equipment. The catalog lists bore diameters of 12, 16, 20 and 25 mm, among others, with minimum operating pressures of approximately 0.1~0.22 MPa. Threaded holes on the grippers include 4-M3×0.5, 4-M4×0.7 and 4-M5×0.8, and effective gripping force increases with bore diameter. Mounting options include threaded holes on the bottom or side of the body, as well as HM-type or HB-type mounting fixtures at the bottom. Major components, including the body, rear cover and piston, are made of aluminum alloy, while the jaws, actuating lever and shaft-end coupling block are made of alloy steel. Replacement seals are available, including piston seals, shaft seals and rear cover O-rings. The weight table covers HDM-12S through HDM-32S, with weights of approximately 0.1~1.23 kg.

HFR Series 180° Opening and Closing Pneumatic Gripper
The HFR series is a 180° opening and closing pneumatic gripper (angular gripper). Dual pistons and a rack-and-pinion or linkage mechanism convert the pistons' linear motion into a 180° opening and closing motion of two fingers around a pivot, enabling workpieces to be gripped, flipped, positioned and held between two points. The series code is HFR, with five bore sizes: 10, 16, 20, 25 and 32. A blank mounting-style field indicates the standard type. Larger bores provide greater effective holding force. When selecting a model, the required holding force should be calculated at 10~20 times the workpiece weight, with an additional safety margin for acceleration or impact. For example, with a 0.05kg workpiece, pivot distance L=30mm and operating pressure of 5kgf/cm², the required effective holding force is approximately 10N or more; the HFR16 (effective holding force 17N) can be selected. The main body components are made of aluminum alloy, alloy steel and stainless steel, with NBR seals and accessories including a C-shaped retaining ring (spring steel). The gripper is suitable for automated assembly, handling and inspection stations.

HFY Series Pneumatic Gripper (Y-Type)
The SNS HFY Series pneumatic gripper (Y-type) is powered by compressed air and features a Y-type jaw design for gripping, handling, and positioning workpieces in automated equipment. It is available in five bore sizes: 6, 10, 16, 25, and 32 mm, with three mounting options: rear mounting, front threaded-hole mounting, and side mounting. The corresponding fastening bolts are M3×0.5, M4×0.7, M5×0.8, M6×1.0, and M6×1.0, respectively. Maximum tightening torque ranges from 0.89~2.5 N·m, and maximum bolt insertion depth ranges from 5~15 mm. A drop-prevention device must be installed during use, and excessive external force and impact must be avoided. The workpiece must be positioned on the centerline between the two jaws and inserted coaxially. Use a speed control valve to adjust the jaw opening and closing speeds. When installing jaw attachments, hold the jaw with an open-end wrench before tightening the screws with a hex key.

HFP Series Pneumatic Gripper (Mechanical Parallel Type)
The HFP series pneumatic gripper (mechanical parallel type) is a double-acting parallel gripper powered by compressed air and requires no lubrication. It has an operating pressure range of 0.1~0.7MPa, an ambient temperature range of -10~+60℃, and repeatability of ±0.05mm. Five bore sizes are available: 10, 16, 20, 25, and 32, each with a choice of long, medium, or short opening and closing strokes. Compared with the MH22 series, its height is reduced by approximately 1/3, its moment is lower, and its rigidity is increased. The finished product ordering code is HFP+bore size+option (e.g., HFP20□). Dimensions for the single-acting type are shown in parentheses. It is suitable for automated handling, gripping, and similar applications.

LMFP Series Flanged Linear Bearings
LMFP Series flanged linear bearings, with bore diameters of 6–60 mm, are designed for linear motion guide systems. Made from high-quality steel, they offer high precision, low friction, and a long service life. A range of sizes is available to suit different load requirements. Nickel-plated versions can be customized for special environments. These bearings are widely used in automation equipment, industrial robots, machine tools, packaging machinery, and other applications.

HFT Series Wide-Opening Grippers
The HFT series wide-opening gripper is a pneumatically driven parallel gripper. A cylinder drives the jaws to grip workpieces over a wide opening and long stroke, making it suitable for picking up and positioning larger workpieces. Five bore sizes are available: 10, 16, 20, 25 and 32. The number after × in the model designation indicates the gripping stroke, ranging from 20~250mm, with configurations from HFT10×20 to HFT32×250. During operation, ensure that the gripping point distance R is within the effective gripping force curve for the corresponding air pressure, and allow a gripping force margin based on the workpiece weight. Jaw attachments should be as light and short as possible to prevent excessive opening and closing inertia from reducing service life. Select locking screws from M4×0.7, M5×0.8, M6×1.0 and M8×1.25 according to the model. Tighten them to the specified maximum tightening torque, install jaw attachments with the piston rod retracted, and fit a drop-prevention device to prevent injury from falling workpieces.

MHS Series Parallel Pneumatic Grippers
The MHS series of parallel-opening pneumatic grippers includes the MHS3 three-finger and MHS4 four-finger configurations, with bore sizes of 16, 20, 25, 32, 40, 50 and 63mm. A parallel opening and closing mechanism synchronizes the fingers, providing stable gripping force and high repeat positioning accuracy. These grippers are suitable for automated workpiece handling, transfer, positioning and assembly. The operating pressure is 0.2~0.6MPa for the 16mm bore and 0.1~0.6MPa for bore sizes of 20mm and above. Models are designated as “MHS3/MHS4-bore size D”, allowing selection by finger count and bore size. Magnetic switches can also be fitted to detect open and closed positions.

HFC Series Pneumatic Gripper (Parallel Opening and Closing)
The HFC series is a double-acting pneumatic gripper with parallel opening and closing. It uses air as the working medium, filtered through a screen rated 40μm or greater. Operating pressure is 0.2~0.7MPa, operating temperature is -20~70℃, repeatability is ±0.01mm, maximum operating frequency is 120 cycles/minute, and the port size is M3×0.5. The compatible sensor switch is DS1-H. All models have a built-in magnet and a standardized internal structure for high gripping force. A cushion at the front of the piston reduces impact noise during gripping, while locating pin holes on the bottom improve mounting accuracy and positioning consistency during repeated removal and reinstallation. Three-jaw (Y) and four-jaw (X) configurations are available, with bore sizes of 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The grippers are suitable for handling workpieces of various shapes in automated equipment.

LMFC Flanged Linear Bearing Series
The LMFC series features flanged linear bearings with a double-seal design, offering high precision, low friction, and long service life. Suitable for linear motion systems in automation equipment, machine tools, industrial robots, and other applications. Bore diameters range from 6 to 60 mm, outer diameters from 12 to 90 mm, basic dynamic load ratings from 323 to 7,550 N, and static load ratings from 529 to 20,000 N. All models are standard; nickel-plated versions can be customized to meet customer requirements. This series is available in a variety of sizes to accommodate different load and mounting requirements.

STMB/STMS Series Twin-Piston Cylinders
The STMB/STMS series consists of twin-piston cylinders available with body or slide mounting. The twin-piston design offers high resistance to bending and torsion, allowing it to handle substantial moving or lateral loads. Bumpers or hydraulic shock absorbers at both ends reduce impact speed and extend service life. Standard bore sizes are 10, 16, 20, and 25 mm. The working medium is air, with an operating pressure of 1.0~9.0 kgf/cm², proof pressure of 13.5 kgf/cm², operating temperature of -20~70℃, operating speed of 30~500 mm/s, stroke tolerance of -1.0 mm, non-rotation angle of ±0.1°, and port size of M5×0.8. Optional high-temperature sealing materials allow operation at 150℃. STMB standard strokes are 25/50/75/100 mm, with a maximum stroke of 200 mm and an allowable stroke of 250 mm. STMS standard strokes are 100/150 mm, with a maximum stroke of 200 mm and an allowable stroke of 250 mm.

MXS Series Pneumatic Slide Table (Dual-Cylinder Type)
The MXS series pneumatic slide table uses two cylinders arranged side by side and a crossed-roller guide for high rigidity and resistance to offset loads. It is suitable for factory automation applications requiring high-precision linear reciprocating motion while supporting an overhung load. Six standard bore sizes are available: MXS6, MXS8, MXS12, MXS16, MXS20, and MXS25, with bores of φ6×2, φ8×2, φ12×2, φ16×2, φ20×2, and φ25×2, respectively. The combined cross-sectional areas of the paired cylinders are equivalent to bores of φ8, φ11, φ17, φ22, φ28, and φ35, respectively. The slide table uses air as its working medium and operates in a double-acting configuration. Selection must be checked against the concentrated load W, overhang Ln, moment center position correction value An, operating and mounting factor K, and allowable concentrated load factor β. The maximum allowable concentrated loads for the respective sizes are 0.6, 1, 2, 4, 6, and 9 kg, each with its corresponding allowable moment. If these limits are exceeded, reduce the load or select a larger bore.

MXQ Series Twin-Cylinder Pneumatic Slide Table (Recirculating Linear Guide)
The MXQ series twin-cylinder pneumatic slide table features a recirculating linear guide and a twin-cylinder (twin-rod) drive for high rigidity and resistance to off-center loads. It is suitable for automated precision positioning, transfer, and clamping applications. Bore sizes range from φ6×2 to φ25×2 (equivalent bore φ8~φ35), with six models: MXQ6, MXQ8, MXQ12, MXQ16, MXQ20, and MXQ25. The double-acting slide uses air as its working medium, with a maximum operating pressure of 0.7MPa and a minimum of 0.15MPa. Ambient and fluid temperatures range from -10~+60℃ (no freezing), and slide speed is 50~500mm/s (50~200mm/s with a metal stopper). Cushioning options include rubber cushioning (standard), a hydraulic shock absorber, or no cushioning (metal stopper). Stroke length tolerance is ±1mm; lubrication is not required. Port threads are M5×0.8 for MXQ6~MXQ20 and Rc1/8 for MXQ25.

HLH Series Side-Rail Precision Slide Table Cylinder
This side-rail precision slide table cylinder integrates a miniature recirculating ball linear guide with a pneumatic cylinder, providing excellent straightness and high anti-rotation accuracy for precision assembly applications. Bore sizes are 6/10/16/20 mm, with corresponding guide rail (linear bearing) widths of 5/7/9/12 mm. Standard strokes range from 5~60 mm (maximum 30 for bore size 6, 50 for bore size 10, and 60 for bore sizes 16 and 20). Contact the manufacturer for custom strokes. Minimum operating pressures are 0.15/0.06/0.05/0.1 MPa. The cylinder can be mounted from 4 directions and connected to piping from 3 directions. The slide table, body, piston and rear cover are alloy; the piston rod and guide rail are stainless steel; the balls are SUS304; and the seals are NBR. Stroke code S indicates a built-in magnet for use with a sensor switch.

HLH Series Side-Rail Precision Slide Table Cylinder
The HLH series side-rail precision slide table cylinder integrates a miniature recirculating-ball linear guide with a pneumatic cylinder, making it suitable for precision assembly, positioning, and short-stroke linear motion. It offers good straightness and anti-rotation accuracy. The cylinder body can be mounted from 4 directions, and piping can be connected from 3 directions. Bore sizes are 6, 10, 16, and 20 mm, with corresponding guide rail widths of 5, 7, 9, and 12 mm. Standard stroke ranges for the respective bore sizes are 5~30 mm, 5~50 mm, 5~60 mm, and 5~60 mm; strokes beyond the standard range can be custom ordered. The finished product order code consists of HLH, the bore size, the stroke, and the stroke code S (with magnet).

HLQ/HLQL Series Multi-Shaft Precision Slide Bushing Cylinder (Recirculating Ball)
The HLQ/HLQL series comprises multi-shaft precision slide bushing cylinders with recirculating-ball linear guides. The integrated piston rod and guide shaft arrangement accommodates moderate off-center loads and torque, making the cylinders suitable for automated clamping, pressing, positioning and other applications requiring high-precision linear guidance. Six bore sizes are available: 6, 8, 12, 16, 20 and 25mm, all with a 10mm rail width. The operating medium is compressed air filtered through a 40μm or higher-grade filter. Operating pressure is 0.15~0.7MPa (approximately 1.5~7.0bar), proof pressure is 1.2MPa, operating temperature is -20~70℃, and operating speed is 50~500mm/s. Cushioning options include fixed front-end cushioning or hydraulic shock absorbers. Port threads are available in M5×0.8 and PT1/8, with G or NPT threads also optional. Major components include aluminum alloy mounting plates and slide bushings, medium-carbon steel or low-alloy steel hex socket ball-head screws, free-cutting steel floating joints, brass pistons and magnet holders, and NBR shaft and piston O-rings. The cylinders offer a compact design, high guiding accuracy and long service life.

HLS/HLSL Series Twin-Shaft Precision Slide Table Cylinder (Roller Type)
The HLS/HLSL series twin-shaft precision slide table cylinder (roller type) features a twin-shaft guide structure and a roller-type linear guide mechanism, offering high rigidity, precise guidance and strong resistance to offset loads. It is suitable for precision positioning, handling, pushing and clamping in automated equipment. Six bore sizes are available: 6, 8, 12, 16, 20 and 25mm. The working medium is compressed air filtered to 40μm or better. The operating pressure range is 0.15~0.7MPa (22~100psi, 1.5~7.0bar), with a guaranteed pressure resistance of 1.2MPa (17psi, 12.0bar). The operating temperature is -20~70℃ and the operating speed range is 50~500mm/s. Accessories such as a retraction-end stroke adjustment screw assembly and a hydraulic shock absorber assembly can be added to limit the retraction stroke and absorb impact. Mounting methods and external dimensions vary by bore size, allowing interchangeability with standard cylinders.

AF Series Retract-End Stroke Adjustment Assembly
The AF series retract-end stroke adjustment assembly is an accessory mounted on the retract end of a standard cylinder to limit its return end position and absorb impact at the end of the stroke. Three configurations are available: a retract-end stroke adjustment screw assembly, a retract-end hydraulic shock absorber assembly, and a retract-end stroke adjustment assembly. All are compatible with standard cylinders with 6, 8, 12, 16, 20, and 25 mm bores. The stroke adjustment range is 5 mm, with an adjustment screw (M2.5~M6) for fine-tuning the return end position. Body mounting threads range from M6×10~M14×15, and overall dimensions A~K increase with bore size. The assemblies are suitable for applications requiring precise control of the cylinder's retracted position and reduced end-of-stroke impact and noise. They can improve positioning repeatability and extend cylinder service life.

LMEFC Stamped Linear Bearing Series
The LMEFC series comprises stamped linear bearings made from pressed steel sheet, with a flanged outer ring for mounting. Their compact, lightweight design makes them suitable for linear motion guidance. Bore diameters range from 8 to 60 mm, and load capacities range from 431 N to 7,550 N, allowing them to withstand substantial radial loads. These bearings offer high rigidity, low friction, and long service life, and are widely used in automation equipment, CNC machine tools, and electronic machinery. Nickel-plated versions are available to order and must be requested in advance.

MK Series Fixed Multi-Position Cylinders
The MK series of fixed multi-position cylinders includes MK, MKD and MKJ (double-acting) models, as well as MSK and MTK (single-acting, extending and retracting) models. Bore sizes range from 6, 10, 16, 20, 25 to 32mm. The operating medium is compressed air filtered to 40μm or finer. The operating pressure range is 0.15~1.0MPa (22~145psi) for double-acting models and 0.2~1.0MPa (22~145psi) for single-acting models. The fixed multi-position design allows stops at multiple predetermined stroke positions, making these cylinders suitable for automated clamping, pressing and conveying applications that require multiple positioning points. The body is compact and offers flexible mounting options.

MD Series Cylinders
MD series cylinders are pneumatic actuators available in double-acting (MD, MDJ) and single-acting versions (MSD single-acting extension and MTD single-acting retraction). Bore sizes are 6, 10, 16, 20, 25, and 32 mm. The working medium is compressed air filtered through a filter rated 40μm or above. Operating pressure is 0.15–1.0 MPa (22–145 psi) for double-acting models and 0.2–1.0 MPa (28–145 psi) for single-acting models. Proof pressure is 1.5 MPa (215 psi), and operating temperature is -20–70°C. G or NPT port threads are available. Applications include automated clamping, pushing, and positioning. The original stroke table and some cushioning, speed, and port size data are incomplete due to scan damage. Confirm bore size, action type, and stroke when selecting a model.

MSD Series Cylinders
The MSD series comprises double-acting and single-acting pneumatic cylinders, divided into three types by operation: MD/MDJ (double-acting), MSD (single-acting extension), and MTD (single-acting retraction). Six bore sizes are available: 6, 10, 16, 20, 25, and 32mm. They support pushing, pulling, ejecting, and clamping in compact automation equipment. The operating medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.15~1.0MPa (22~145psi) for double-acting models and 0.2~1.0MPa (28~145psi) for single-acting models. The proof pressure is 1.5MPa (215psi), and the operating temperature is -20~70℃. G and NPT port threads are available for compatibility with domestic and international piping. Select a model based on bore, stroke, action type (double-acting or single-acting), and port thread. A cushioned design is available for applications subject to greater impact.

MTD Series Cylinders
The MTD series is a family of air-operated compact and pen-style cylinders, including MD/MDJ double-acting models and MSD/MTD single-acting models (single-acting push and single-acting pull types). Six bore sizes are available: 6, 10, 16, 20, 25, and 32 mm, with a choice of stroke lengths. Mounting features at both ends of the piston include 2-ΦK through-holes and ΦJ counterbores (depth JA). The overall dimension varies linearly with stroke, expressed as AC+stroke. The operating medium is compressed air filtered through a 40μm or finer filter. Operating pressure is 0.15~1.0 MPa (22~145 psi) for double-acting models and 0.2~1.0 MPa (28~145 psi) for single-acting models. Proof pressure is 1.5 MPa (215 psi), and operating temperature is -20~70 ℃. G or NPT port threads are available. These cylinders are suitable for short-stroke clamping, pushing, and positioning in electronics, packaging, assembly, and other applications.

MDJ Series Cylinders
The MDJ series includes MD/MD/MDJ double-acting cylinders and MSD/MTD single-acting cylinders in extension and retraction types. The operating medium is air filtered through a 40μm or finer filter. Bore sizes are 6, 10, 16, 20, 25, and 32 mm. Operating pressure is 0.15-1.0 MPa for double-acting models and 0.2-1.0 MPa for single-acting models. Proof pressure is 1.5 MPa, and operating temperature is -20-70℃. G or NPT port threads are available. Dimensions include through-holes, counterbores, and stroke-dependent mounting dimensions. Select the model based on bore size, action type, stroke, and port thread type.

CU Series Cylinders
The CU series cylinders are compact pneumatic actuators available in six bore sizes: 6, 10, 16, 20, 25, and 32 mm. They use air as the operating medium and are available in double-acting and single-acting (spring return/spring extend) configurations, with a choice of basic or built-in magnetic ring versions. Depending on the bore size and operating type, the minimum operating pressure ranges from 0.05 to 0.23 MPa. They are suited to clamping, pressing, and positioning applications in automated equipment where space is limited. When selecting a cylinder, confirm the complete model number based on bore size, stroke, operating type, and whether a magnetic ring is required.

CUJB Series Miniature Free-Mount Cylinders
CUJB series miniature free-mount cylinders feature a compact body and can be mounted in multiple orientations in confined spaces. Bore sizes are 4, 6, 8, 10, 12, 16 and 20 mm. They are available in double-acting or single-acting (spring-return) versions and use air as the working medium. Maximum operating pressure is 0.7 MPa; minimum operating pressure is 0.15/0.1/0.07/0.05 MPa depending on bore size. The catalog also provides dimension tables for non-rotating rod and built-in magnet types, as well as double-acting and single-acting (spring-return/spring-extend) versions. These cylinders are suitable for short-stroke pushing, positioning and clamping in automated equipment for electronics assembly, inspection, fixturing and packaging. Select the appropriate bore, stroke, action and mounting accessories for the application.

CUK Series Non-Rotating Rod Cylinders
CUK series non-rotating rod cylinders have a built-in magnetic ring and are available in double-acting and single-acting (spring-return/spring-extend) configurations. An anti-rotation mechanism prevents the piston rod from rotating, making these cylinders suitable for applications requiring workpiece rotation prevention and precise positioning. The built-in magnetic ring enables position detection when used with a magnetic switch. Six bore sizes are available: 6, 10, 16, 20, 25, and 32 mm. Overall and mounting dimensions are provided for each size, including A, A', B, C, D, E, F, FL, FK, FY, GA, GB, H, J, K, L, MM, NA, NB, NN, ΦP, Q, R, ΦT, U, and Y. Separate dimension tables for double-acting and single-acting (spring-return) models simplify selection and installation.

MU Series Oval Piston Cylinder (Non-Rotating Rod)
The MU series oval piston cylinder (non-rotating rod) is a pneumatic actuator from SNS Automation (Ningbo) Group. Its oval piston and non-rotating piston rod prevent the rod from turning during reciprocating motion, making it suitable for clamping, pressing, lifting, and stopping applications that require rod-end positioning and rotation prevention. Five bore sizes are available: 25, 32, 40, 50, and 63 mm, with standard strokes from 5~300 mm. The cylinder has an extruded aluminum alloy body and adjustable cushioning. The rod-end internal thread, lock nut, and port thread vary with bore size; for example, the 25 mm bore uses an M10×1.25 rod-end thread and an M5×0.8 port, while the 63 mm bore uses an M18×1.5 rod-end thread and an Rc1/4 port. Mounting options include the basic style, foot mounts (MU-L02~MU-L06, corresponding to bore sizes 25~63), and pivot accessories such as single and double clevis mounts.

RMS Series Cylinders
The RMS series comprises pneumatic actuators (cylinders) manufactured by SNS Automation (Ningbo) Group. The catalog lists two subseries, RMS and RMSF. RMS cylinders are available in six bore sizes: 10, 16, 20, 25, 32, and 40 mm. RMSF cylinders are available in three bore sizes: 16, 20, and 32 mm. They support pushing, pulling, clamping, and lifting of small to medium-sized components in confined installation spaces. The catalog lists selection parameters such as action type, working medium, operating pressure range, proof pressure, and operating temperature range; the values shown in these rows should be verified against the manufacturer's complete specification sheet. Bore size is the primary selection parameter. Rod and mounting configurations, such as non-rotating rods, foot mounts, and single or double clevis mounts, are selected as needed. Mounting components such as foot mounts are selected according to bore size. These general-purpose cylinders are suitable for automation equipment, fixtures, packaging, and assembly lines.

LMK Square-Flange Extended Linear Bearings
The LMK series features square-flange extended linear bearings with bore diameters of 6–60 mm, outer diameters of 12–90 mm, and lengths of 35–209 mm. Steel balls provide rolling guidance for low friction and smooth motion. Basic dynamic load ratings range from 320 to 7,650 N, and static load ratings from 520 to 20,000 N. Suitable for linear motion systems in automation equipment, industrial machinery, and other applications. Nickel-plated versions are available.

RMSF Series Cylinders
The TWSNS RMSF series cylinders belong to the same product family as the RMS series. Their parameters are listed in series specification tables in the catalog. The RMSF series is available in bore sizes of 16, 20, and 32 mm, while the RMS series covers 10, 16, 20, 25, 32, and 40 mm; both series offer 16, 20, and 32 mm bores. The specification table has separate columns for each series and lists parameters such as operating type, working medium, operating pressure range, proof pressure, and operating temperature range. These pneumatic actuators are used in industrial automation equipment for linear pushing and pulling, clamping, lifting, and similar operations. Select the specific model based on bore size, stroke, mounting type, and accessory requirements.

RMT Series Magnetically Coupled Rodless Cylinder (Guide Rod Type)
The RMT series is a magnetically coupled rodless cylinder with guide rods. It transmits force through magnetic coupling and is suitable for long-stroke linear reciprocating motion where space is limited. The catalog lists five bore sizes: 16, 20, 25, 32, and 40 mm. The operating pressure range is 0.2–0.7 MPa (0.25–0.7 MPa for some bore sizes), and theoretical holding force (theoretical thrust) curves are provided. In use, the load’s center of gravity should coincide with or be close to the slider’s center of gravity. If this is not possible, check the allowable load using the load correction factor σ. For example, with a 25 mm bore and 650 mm stroke, the maximum load is 16 kg, the allowable load is 10.9 kg, and σ=0.68. For certain bore and stroke combinations, σ is 1.

RMTL Series Magnetically Coupled Rodless Cylinder (Precision Guide Rod Type)
The RMTL series magnetically coupled rodless cylinder (precision guide rod type) transmits force through magnetic coupling and has no piston rod. Precision guide rods ensure accurate linear motion and resistance to rotation. Six bore sizes are available: 10, 16, 20, 25, 32 and 40mm. The cylinder is double-acting and uses compressed air filtered through a filter rated at 40μm or higher. Operating pressure is 0.2~0.7MPa (30~100psi/2.0~7bar), with a proof pressure of 1.2MPa (175psi/12.0bar). Operating temperature is -20~70℃ and speed is 50~500mm/s. Stroke tolerance is 251~1000mm×1.5. Fixed shock absorbers are available as an option. Main components include aluminum alloy left and right mounting plates and threaded caps, stainless steel tubes and connecting rods, NBR O-rings and bumpers, medium-carbon steel guide rods, and socket head load-bearing screws. It is suitable for automation applications requiring long strokes, compact installation or high-precision guidance.

OSP-P Series Rodless Cylinders
The OSP-P series consists of double-acting rodless cylinders with an integrated carriage and piston. Compressed air drives the internal piston, which moves the external carriage through a slot running axially along the cylinder barrel. Force is transmitted directly and is equal in both directions, saving approximately 50% of installation space. The range covers bore diameters of Ø16, 25, 32, 40, 50, 63 and 80 mm. Standard strokes are 100~4400 mm for Ø16 and 100~5700 mm for Ø25~63, available in 1 mm increments; longer strokes can be customized. Operating pressure is 0.5~8.0 bar and temperature is -10~+80 ℃. Air ports are M5, G1/8, G1/4 and G3/8. The end caps have ports in multiple directions and adjustable pneumatic cushioning. The cylinder barrel, end caps and piston shaft are made of high-strength steel or anodized aluminum alloy, and the sealing band is stainless steel. The cylinders are suitable for long-stroke automated conveying and positioning applications where space is limited.

PLF Series Compact Cylinders
PLF series compact cylinders are pneumatic actuators designed for light-load pushing, pulling, clamping and positioning applications where installation space is limited. The catalog provides overall and mounting dimensions for six bore sizes: 16, 25, 32, 40, 50 and 63 mm. It includes dimensions in multiple directions, air port threads (M5, G1/8, G1/4, G3/8) and mounting thread specifications. The catalog also provides maximum load, force and moment curves, and advises keeping loads and moments under dynamic operating conditions within 10–20% of the allowable values to prevent off-center loads and vibration from shortening service life. Select the cylinder based on bore size, stroke, mounting method and cushioning requirements.

LMH Oval-Flange Extended Linear Ball Bushing
The LMH series oval-flange extended linear ball bushings feature an oval flange design and are suited to linear-motion applications requiring high load capacity and long service life. Their recirculating steel-ball design provides smooth, low-friction motion. Bore diameters range from 6 to 60 mm, outer diameters from 12 to 90 mm, and lengths from 35 to 209 mm. Basic dynamic load ratings range from 320 to 7,650 N, and static load ratings from 520 to 20,000 N. The LUU suffix indicates an extended version; nickel plating is available as an option. Suitable for automation equipment, industrial machinery, and other applications.

MSQ Series Rack-and-Pinion Rotary Actuator
The MSQ series rack-and-pinion rotary actuator converts the linear reciprocating motion of a piston into back-and-forth rotation of an output shaft. It is suitable for automated applications such as workpiece flipping, indexing, rotary clamping and opening and closing material stops. The double-acting actuator receives compressed air alternately from either side; the air supply side determines the direction and angle of rotation. The rotation angle can be adjusted using external limits or stops. The working medium is air, and no lubrication is required, allowing maintenance-free operation. Maximum operating pressure is 1MPa, with a typical operating range of approximately 0.2~1.0MPa (varying slightly by bore size). Standard bore sizes are φ10, φ20, φ30, φ50, φ70, φ100 and φ200 mm. Larger bores provide higher output torque; select a model based on the required torque, allowable axial and radial loads, and available installation space. The compact actuator delivers smooth torque and good positioning repeatability. It can be fitted with accessories such as magnetic switches, shock absorbers and adjustable stops, and is widely used for rotary motion on automated packaging, assembly, welding and material-handling lines.

CRQB Series Rotary Cylinder
The CRQB series rotary cylinder (swing cylinder) is a double-acting vane-type pneumatic actuator available in five bore sizes: Φ10, Φ15, Φ20, Φ30 and Φ40. Standard swing angles are 90° and 180°, with an adjustment range of ±5°. The operating medium is air. Maximum operating pressure is 0.7MPa for Φ10/Φ15 and 0.99MPa for Φ20~Φ40; minimum operating pressure is 0.15MPa and 0.1MPa, respectively. Ambient and fluid temperatures range from 0~60℃. Cushioning options include no cushioning or air cushioning (C air cushioning is available for Φ20 and above). Single-rod (S) and double-rod (W) versions are available, with an optional built-in magnetic ring and optional magnetic switches such as D-90AL, D-A72L, D-A73L and D-A76L for swing position detection. Port size is M5×0.8 for Φ10/Φ15 and 1/8 for Φ20 and above. Suitable for automated rotary applications such as workpiece turning, clamping, indexing and diverting.

SRC Series Rotary Cylinders
SRC series rotary cylinders (rotary clamp cylinders) rotate and clamp workpieces downward. The model designation consists of the series code SRC, rotation direction, cylinder bore, cylinder stroke, and clamp type. Rotation direction is designated L for left or R for right. Cylinder bores are available in 12, 16, 20, 25, 32, 40, 50, and 63 mm (the catalog model table highlights 25/32/50/63). Stroke is specified as the downward clamping stroke. Clamp types are an unmarked single-sided clamp arm and a D double-sided clamp arm; the 25 bore is not available with a double-sided clamp arm. The catalog also lists the free supply method as M5×0.8. Parameters such as operating type, working fluid, pressure, temperature, and speed are not fully specified on the standard specifications page; consult the complete catalog when selecting a model.

RSQ Series Stopper Cylinders
The RSQ series stopper cylinders are pneumatic stopping devices with a fixed mounting height, designed to position and stop workpieces or slides on conveyor lines, indexing tables, and similar equipment. Bore sizes are 12, 16, 20, 32, 40, and 50 mm. Three operating types are available: double-acting, double-acting with built-in spring, and single-acting with spring extension. Rod end options include cylindrical, flat-sided, and roller types to suit the desired stopping contact. The roller type provides rolling contact with moving workpieces to reduce wear. The operating medium is compressed air, with a pressure range of 0.15~1.0 MPa (1.5~10.2 kgf/cm²) and an ambient and fluid temperature range of -10~70℃, with no freezing. No lubrication is required, and the cylinders can be connected directly to a standard dry air supply. The fixed mounting height allows quick interchange and replacement in equipment. Stroke tolerance is +1.4 mm.

RSA Series Stopper Cylinder
The RSA Series stopper cylinder is a pneumatic stopping device manufactured by SNS Automation (Ningbo) Group Co., Ltd. Turning the adjustment dial changes the resistance of the built-in roller shock absorber, providing adjustable cushioning and a controlled stop for moving loads. It has the same specifications and operating range as the RS1H Series and is interchangeable with cylinders of the same size, sharing the same mounting dimensions. Model designations consist of RSA followed by the bore size, such as RSA 50. Different sizes can be selected by bore. Typical applications include positioning and stopping workpieces on conveyor lines, braking rotary tables, and stopping slide tables at their end positions in automated systems that require a cushioned stop. The catalog page is in Traditional Chinese, and the model designation table was not fully readable in the original scan. For dimensions other than bore size, including stroke, cushion stroke, and port thread, refer to the manufacturer's latest catalog or technical documentation.

Extended Flanged Linear Bearing Series
The extended flanged linear bearing series includes round-flange extended models (R.F.L) and square-flange extended models (Q.F.L), designed for linear motion applications requiring high load capacity and long service life. These bearings use rolling steel-ball contact to provide low-friction, high-precision linear motion. Models are available with inner diameters from 8 mm to 60 mm, outer diameters from 16 mm to 90 mm, and lengths from 46 mm to 209 mm. Basic dynamic load ratings range from 430 N to 7,650 N, and basic static load ratings range from 780 N to 20,000 N. Nickel-plated versions can be produced upon request.

LB Series Brackets
LB series brackets are fixed mounting components used to install and position related parts in factory automation equipment. They are typically fabricated from sheet carbon steel (zinc-plated or blackened) or stainless steel and secured with screws to the equipment body, aluminum extrusion, or cylinder or sensor body, providing rigid support and accurate positioning. The series includes numerous bracket shapes and sizes listed by drawing number (numbered Figure 1, Figure 2, and so on in the catalog). Different drawing numbers correspond to different mounting hole spacing, bend angles, and profiles. To select a bracket, first confirm the mounting hole locations, thread specifications, and available installation space for the mating component, then choose the corresponding drawing number. This page is presented as images and provides only the series name and a drawing number index. Detailed dimensions, materials, and thread specifications for each drawing are not provided; consult the corresponding drawing or request specifications from the manufacturer.

MOB Series Hydraulic Cylinders
The MOB series is a standard hydraulic cylinder manufactured by Shansi Automation (Ningbo) Group Co., Ltd., with MOB as the type designation. Bore diameters include Φ30, Φ40, Φ50, Φ63, Φ80, Φ100, Φ125, Φ160, and Φ200, and the stroke can be specified to suit user requirements. Cylinder mounting options include FA front flange, TC intermediate trunnion, and TC-M configurations. The rod-end mounting type is a Y-type clevis, which can be used with an ISO-PHS rod-end bearing for pivoting connections. Rod thread types are H or E (external thread, unmarked). A magnet (M) and cushioning positions (2/R) are optional. The catalog provides overall and mounting dimensions such as EB, EC, ED, EE, EG, EP, ET, and S for each bore size, as well as detailed dimensions including HA~HP for the TC-M type and PA~PH and NA~PB for the ISO-PHS rod-end bearing and Y-type clevis. These dimensions facilitate selection by bore and stroke and verification of installation space.

Y-Type Clevis
A Y-type clevis is a forked pivoting attachment fitted to the end of a pneumatic or hydraulic cylinder piston rod. It connects the rod to a load or oscillating mechanism, allowing angular movement while supporting tensile and compressive loads. The catalog provides dimensional series for cylinder bores of 32, 40, 50, 63, 80, 100, 125, 160, and 200 mm, including dimensions and thread specifications such as PA/PB/PC/PD/PE/PF/PG/PH and NA/NB/NC/NE/NF/NG/NH/NJ/NK/NM/MP/NQ/PA/PB. Threads range from M10×1.25 to M36×2. Select according to cylinder bore and available mounting space.

HOB Series Square Heavy-Duty Integral-Body Hydraulic Cylinder
The HOB series heavy-duty hydraulic cylinder features a square cylinder body with an integral-body construction. It is designed for high-pressure, heavy-load hydraulic applications such as stamping, injection molding, construction machinery, and automated equipment. Bore sizes include Φ40, Φ50, Φ63, Φ80, Φ100, Φ125, Φ150, Φ180, and Φ200, with custom strokes available. Cylinder mounting options include front flange (FA), while piston rod end options include 10A and Y. A magnet and cushioning at position R are standard. Cylinder bore and rod dimensions correspond to the standard specification table. The A-mount steel sleeve can be extended 5mm beyond the body for easier installation and adjustment.