product — Page 86

DLD Aluminum Alloy Double-Diaphragm Short Clamping Series
The DLD Series features short aluminum-alloy double-diaphragm clamping couplings, made with high-strength aluminum-alloy hubs and 304 stainless steel diaphragms. They provide high torsional rigidity for precise shaft rotation control and are suitable for servo and stepper motors. The backlash-free connection supports forward and reverse rotation, while the low inertia makes them ideal for high-speed operation. Secured with clamping screws, they are available with outer diameters ranging from 19–44 mm and 50–126 mm. Custom specifications are available.

DLJ Aluminum Alloy Double-Diaphragm Set-Screw Type
The DLJ series features aluminum alloy, double-diaphragm, set-screw couplings. They use high-strength aluminum alloy hubs and 304 stainless steel diaphragms, offering high torsional rigidity, backlash-free connections, and low inertia. They are suitable for servo and stepper motors. Secured with set screws and featuring a keyway, these couplings can handle forward and reverse rotation. Multiple models are available, with outer diameters of 26–44 mm, lengths of 35–50 mm, rated torques of 1.5–9 N·m, allowable eccentricity of 0.15–0.22 mm, an allowable angular misalignment of 1.5°, and speeds up to 10,000 rpm. Custom specifications are available, and bore sizes can be machined to order.

DST Aluminum Alloy Stepped Single-Diaphragm Clamping Coupling
The DST series aluminum alloy stepped single-diaphragm clamping coupling features high-strength aluminum alloy hubs and a 304 stainless steel diaphragm, providing high torsional rigidity for precise control. Designed for servo and stepper motors, it delivers a backlash-free connection and is suitable for bidirectional rotation and high-speed operation (up to 10,000 RPM). Its low-inertia design is available in a range of outer diameter × length sizes (DST-34×27.5 to DST-82×68), with rated torque from 2 to 50 N·m. Custom bore sizes are available, and the two end bores can be freely configured in ascending size combinations; bores are machined to H7/H8 tolerances. The surface is anodized, and the coupling is secured with clamping screws.

DLT Aluminum Stepped Double-Diaphragm Clamp Coupling Series
DLT Series aluminum stepped double-diaphragm clamp couplings feature high-strength aluminum alloy hubs and 304 stainless steel diaphragms. They offer high torsional rigidity, zero-backlash connection, and low inertia. Designed specifically for servo and stepper motors, they are suitable for high-speed operation and applications involving frequent forward and reverse rotation. Secured with clamp screws, they can be custom-made with non-standard bore sizes. Model numbers follow the format DLT-outer diameter × length, such as DLT-34×38 and DLT-39×47. Outer diameters range from 34 mm to 82 mm, and lengths from 38 mm to 87 mm. Maximum rated torque is up to 50 N·m, allowable eccentricity is 0.1 mm, allowable angular misalignment is 1°, and maximum allowable speed is 10,000 rpm.

DSE High-Sensitivity Aluminum Alloy Single-Diaphragm Clamp Series
DSE Series high-sensitivity aluminum alloy single-diaphragm clamp couplings feature high-strength aluminum alloy hubs and 304 stainless steel diaphragms. Designed for servo and stepper motors, they offer high torsional rigidity, zero backlash, and low inertia. The range includes 6 standard sizes, with outside diameters from 16 mm to 55 mm and lengths from 16.6 mm to 37.2 mm. Rated torque ranges from 0.5 N·m to 25 N·m, and maximum allowable speed is 9,000 rpm. Allowable misalignment: eccentricity 0.1 mm, angular misalignment 1°–1.5°, and axial displacement ±0.09–±0.3 mm. The couplings are secured with clamping screws and have an anodized surface. Custom bore sizes are available; standard tolerances are H7/H8. Suitable for high-precision reversing and high-speed applications.

DLF High-Sensitivity Aluminum Alloy Double-Diaphragm Clamping Series
The DLF Series high-sensitivity aluminum alloy double-diaphragm clamping coupling features high-strength aluminum alloy hubs and 304 stainless steel diaphragms, delivering high torque rigidity and a backlash-free connection. It is suitable for servo and stepper motors. The double-diaphragm design compensates for parallel, angular, and axial misalignment, making it suitable for reversible operation and high-speed applications. The clamping screw fastening method and low inertia make it ideal for high-speed operation. The surface is anodized, and socket head cap screws are included. Custom bore sizes are available.

DSEJ High-Sensitivity Aluminum Alloy Single-Diaphragm Set-Screw Series
The DSEJ series comprises high-sensitivity aluminum alloy single-diaphragm set-screw couplings. The hubs are made of high-strength aluminum alloy, and the diaphragm is made of 304 stainless steel. Features include high torsional rigidity, backlash-free connection, low inertia, and suitability for high-speed rotation in both directions. The shaft is secured to the hub with set screws, and custom bore sizes are available. Key specifications include rated torque of 0.9–9 N·m, allowable eccentricity of 0.1–0.15 mm, angular misalignment of 1°, axial deviation of ±0.10–±0.20 mm, and maximum speed of 3,800–6,000 rpm. Coupling outer diameters range from 16 to 50 mm, and lengths from 16.5 to 41 mm. They are suitable for precision drive applications such as servo and stepper motors.

DLFJ Series Diaphragm Couplings
The DLFJ Series features high-sensitivity, aluminum-alloy, double-diaphragm couplings with set screws. They are made with high-strength aluminum-alloy hubs and 304 stainless steel diaphragms, with an anodized surface finish. Key features include high torsional rigidity, zero backlash, and ultra-low inertia, making them suitable for high-speed, bidirectional drives powered by servo and stepper motors. They compensate for angular and axial misalignment and have identical rotational characteristics in both clockwise and counterclockwise directions. Available in a range of outer-diameter × length sizes, with freely configurable bore sizes (H7/H8 tolerances). Custom specifications are also available.

DSM Aluminum Single-Diaphragm Internal-Clamping Series
The DSM series features aluminum-alloy, single-diaphragm couplings with an internal-clamping design. The hubs are made of high-strength aluminum alloy, and the diaphragm is made of 304 stainless steel. Internal clamping minimizes installation errors, while high torsional rigidity enables precise shaft rotation and high-accuracy control. Designed for servo and stepper motors, these couplings provide a backlash-free shaft-to-hub connection, work in both directions, and offer low inertia for high-speed operation. Models are available in various diameter and length combinations, from 19 × 20 to 56 × 45.

DLM Aluminum Alloy Double-Diaphragm Internal Clamp Series
The DLM series comprises aluminum alloy double-diaphragm couplings with an internal clamping design. The hubs are made of high-strength aluminum alloy, and the diaphragms are made of 304 stainless steel. The internal clamping design helps reduce installation errors. High torsional rigidity enables precise control of shaft rotation for high-accuracy operation. Designed specifically for servo and stepper motors, these couplings provide a backlash-free shaft-to-hub connection and are suitable for bidirectional rotation. Their low inertia makes them ideal for high-speed operation. The hubs are secured with internal clamping screws. Six models are available: DLM-19×27, DLM-26×35, DLM-34×45, DLM-39×50, DLM-44×50, and DLM-56×64. Each model is available with a range of bore sizes to suit different shaft diameters. The surface is anodized, and cylindrical screws are included as standard accessories.

DSG Diaphragm Clamping Series
DSG series diaphragm clamping couplings feature diaphragms made of 304 stainless steel and high torsional rigidity, enabling precise control of shaft rotation for high-accuracy applications. Designed specifically for servo and stepper motors, they provide a zero-backlash shaft-to-hub connection and are suitable for forward and reverse rotation. The hubs are made of 45# steel for high precision and high torque capacity. They are secured with clamping screws. The range includes precision single-diaphragm models (DSG) and precision double-diaphragm models (DLG). Example models are DSG-34×32 and DLG-34×45×6×6; the latter has an outer diameter of 34 mm, a length of 45 mm, and a 6 mm bore. Special bore options are available, including keyways, hexagonal bores, square bores, and splined bores.

DLG Dual-Diaphragm Clamping Series
DLG dual-diaphragm clamping-series couplings feature diaphragms made of 304 stainless steel, providing high torsional rigidity for precise shaft rotation control and high-precision operation. Designed specifically for servo and stepper motors, they provide a zero-backlash shaft-to-hub connection and are suitable for forward and reverse rotation. The hubs are made of grade 45 steel for high precision and high torque. Secured with clamping screws. The standard size has an outer diameter of 34 mm, a length of 45 mm, and a 6 mm × 6 mm bore. Special bore options can be added as required, including keyways (K), hexagonal bores (F), square bores (S), and splined bores (H).

DWTS Aluminum Alloy Single-Step Three-Diaphragm Clamping Series
DWTS aluminum alloy single-step, three-diaphragm clamping couplings offer high torsional rigidity for precise shaft rotation and high-accuracy control. Designed for servo and stepper motors, they provide a backlash-free shaft-to-hub connection and are suitable for forward and reverse operation. Their low-inertia design makes them ideal for high-speed applications. The diaphragms are made of fatigue-resistant spring steel, with 304 stainless steel for added durability. Clamping screws make installation easy, and the hubs are made of high-strength aluminum alloy. A range of models is available, with outside diameters from 34 to 82 mm and lengths from 55.9 to 128.1 mm. Rated torque ranges from 3 to 60 N·m, with a maximum speed of 10,000 rpm. Allowable eccentricity is 0.12 mm, allowable angular misalignment is 1.5°, and allowable axial misalignment is ±0.35–0.85 mm. Bore sizes can be freely combined, and custom specifications are available. These couplings are widely used in precision drive applications, including automation equipment, robots, and CNC machine tools.

DW Aluminum Alloy Diaphragm Coupling Series
This series of aluminum alloy diaphragm couplings includes the DWTS single-step, three-diaphragm clamp type and the DW three-diaphragm clamp type. Made with high-strength aluminum alloy hubs and 304 stainless steel diaphragms, these couplings offer high torsional rigidity, zero backlash, and low inertia, making them suitable for precision transmission with servo and stepper motors. They compensate for radial, angular, and axial misalignment and support speeds of up to 10,000 rpm. The diaphragms are made of spring steel or 304 stainless steel and offer excellent fatigue resistance. They use a clamping-screw fastening method, with bores machined to H7/H8 tolerances. Custom specifications are available.

DLFG Aluminum Alloy Double-Diaphragm Clamp-Type Coupling
The DLFG series aluminum alloy double-diaphragm clamp-type coupling features hubs made of high-strength aluminum alloy and diaphragms made of 304 stainless steel. It offers high torsional rigidity, zero backlash, ultra-low inertia, and high responsiveness, making it suitable for high-speed servo and stepper motor operation. The range includes five sizes, with rated torque from 1.2 to 25 N·m, allowable parallel misalignment of 0.10–0.25 mm, allowable angular misalignment of 1–1.5°, and a maximum speed of 10,000 RPM. The bore sizes at both ends can be freely configured. The bores are machined to H7/H8 tolerances, and custom specifications are available.

DSEG Aluminum Alloy Single-Diaphragm Clamp-Type Coupling
DSEG Series aluminum alloy single-diaphragm clamp-type couplings feature hubs made of high-strength aluminum alloy and diaphragms made of 304 stainless steel. They offer high torsional rigidity, zero backlash, ultra-low inertia, and high sensitivity. Designed specifically for servo and stepper motors, they are suitable for high-speed operation and provide identical rotational characteristics in both clockwise and counterclockwise directions. The stainless steel diaphragm compensates for angular and axial misalignment. Available in a range of sizes, from DSEG-21×16.7 to DSEG-55×37.2, these couplings have rated torques of 1.2–25 N·m, allowable eccentricity of 0.10 mm, allowable angular misalignment of 1°–1.5°, allowable axial misalignment of ±0.14–±0.30 mm, maximum speeds of 8,000–10,000 RPM, static torsional stiffness of 900–23,000 N·m/rad, and weights of 12–180 g. Bore tolerances are H7/H8. Custom sizes are available.

DLFJG Series Diaphragm Couplings
The DLFJG series aluminum alloy double-diaphragm coupling with set screws features hubs made of high-strength aluminum alloy and diaphragms made of 304 stainless steel. It offers high torsional rigidity, a zero-backlash connection, ultra-low inertia, and high responsiveness, making it suitable for high-speed operation. Its clockwise and counterclockwise rotation characteristics are identical, and the stainless steel diaphragms compensate for angular and axial misalignment. Designed specifically for servo and stepper motors, it delivers high-precision control. The surface is anodized, and the included hardware consists of cylindrical screws. Custom specifications are available.

DSEJG Aluminum Alloy Single-Diaphragm Set-Screw Coupling
The DSEJG series aluminum alloy single-diaphragm set-screw coupling features sleeves made of high-strength aluminum alloy and a diaphragm made of 304 stainless steel. Its high torsional rigidity enables precise shaft rotation control for high-precision positioning. Designed specifically for servo and stepper motors, it provides a backlash-free shaft-to-sleeve connection and supports forward and reverse rotation. Its low inertia makes it suitable for high-speed operation. It uses set screws for locking. The outer diameter ranges from 21 to 55 mm, the length from 16.7 to 37.2 mm, and the rated torque from 1.2 to 25 N·m. Allowable eccentricity is 0.10 mm, allowable angular misalignment is 1–1.5°, allowable axial misalignment is ±0.14–±0.30 mm, and the allowable speed is 8,000–10,000 rpm. Various bore combinations are available, and custom non-standard configurations such as keyways, hexagonal bores, square bores, and spline bores can be made to order.

DLN Aluminum Alloy Round Double-Diaphragm Clamp-Type Coupling
The DLN series aluminum alloy round double-diaphragm clamp-type coupling features high-strength aluminum alloy hubs and 304 stainless steel diaphragms. With high torsional rigidity, zero-backlash connection, and low inertia, it is designed for servo and stepper motors and is suitable for high-speed operation and forward/reverse rotation. The surface is anodized, and the hubs are secured with set screws. Available in a range of outer diameters and lengths (19 × 27 to 50 × 57 mm). Bore sizes can be customized to meet customer requirements. H7/H8 standard tolerances are used by default, and custom specifications are available.

DSN Aluminum Alloy Round Single-Diaphragm Clamp-Type Coupling
The DSN series features round, single-diaphragm clamp-type couplings made from aluminum alloy. The hubs are made of high-strength aluminum alloy, and the diaphragm is made of 304 stainless steel. High torsional rigidity enables precise control of shaft rotation for high-precision positioning. Designed specifically for servo and stepper motors, the zero-backlash connection supports forward and reverse rotation, while the low inertia makes it suitable for high-speed operation. Set screws provide secure fastening and make installation easy. These couplings are suitable for applications requiring precision power transmission and misalignment compensation. Multiple sizes are available, with outer diameters from 19 mm to 50 mm and lengths from 20 mm to 42 mm. Custom, non-standard designs are available to meet special requirements.

DFC Diaphragm Coupling
The DFC series features high-strength aluminum alloy diaphragm couplings with an anodized surface and cylindrical screw locking. Designed for high torque, high rotational speeds, low inertia, and zero backlash, they are suitable for precision drive applications such as servo and stepper motors. Models are specified by the combination of two shaft-hole diameters and are available in a wide range of bore sizes. Permissible misalignment: 0.02 mm parallel, 1° angular, and ±0.60 mm axial (±1.00 mm for some larger sizes).

LMT Series Jaw Flexible Coupling
The LMT Series jaw coupling uses a flexible intermediate spider to absorb vibration and compensate for radial, angular, and axial misalignment. It is oil-resistant and electrically insulating, with identical clockwise and counterclockwise rotation characteristics. Available with elastomers in three hardness grades and secured with clamping screws. Made from high-strength aluminum alloy with an anodized finish. Models range from 14 mm to 105 mm in outer diameter and 22 mm to 615 mm in length. Custom bore sizes are available to meet special operating requirements.

DF Series Jaw Coupling
The DF Series jaw coupling features a high-strength aluminum alloy body and a polyurethane elastomer insert, offering excellent wear resistance, oil resistance, and electrical insulation. Its zero-backlash design is suitable for operation in both directions and compensates for radial, angular, and axial misalignment. The removable design makes installation easy, and set screws secure the coupling in place. Models are designated by outer diameter and length (for example, DF-20×30). Outer diameters range from 14 to 965 mm, with lengths varying accordingly. A range of standard sizes is available to meet different power transmission requirements.

DLZ Aluminum Alloy Expansion-Sleeve Jaw Coupling
The DLZ series aluminum alloy expansion-sleeve jaw coupling is designed for spindle applications requiring high speeds and high torque transmission. Its expansion-sleeve design provides a secure connection between the shaft and hub, while zero backlash makes it suitable for bidirectional rotation. The polyurethane elastomer offers good wear resistance, oil resistance, and electrical insulation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Its removable design makes installation easy. The hubs are made of high-strength aluminum alloy with an anodized finish. Bore holes are machined to standard H7/H8 tolerances, and custom specifications are available. A range of models and sizes is offered, with rated torque from 45 to 105 N·m and maximum torque from 90 to over 200 N·m, depending on the model, to accommodate different shaft diameters.

JFG Series Jaw Couplings
JFG series jaw couplings feature high-strength aluminum alloy hubs and a polyurethane spider, offering excellent wear resistance, oil resistance, and electrical insulation. The zero-backlash design is suitable for operation in both directions. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy. The surface is anodized, and the coupling is secured with clamping screws.

DLZG-45# Steel Expansion-Sleeve Jaw Coupling
The DLZG-45# steel expansion-sleeve jaw coupling is designed for spindle applications requiring high-speed, high-torque transmission. Its expansion-sleeve design ensures a secure connection between the shaft and hub with zero rotational clearance, and supports both forward and reverse rotation. The polyurethane elastomer is wear-resistant, oil-resistant, and electrically insulating. It absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy. Made of 45# steel with a blackened surface finish, it is supplied with set screws. Standard models include DLZG-55×78, DLZG-65×90, DLZG-80×114, DLZG-95×126, and DLZG-105×140. Custom, non-standard models are also available.

DJ-A Star-Shaped Elastic Coupling
The DJ-A Star-Shaped Elastic Coupling features a compact design and low inertia. Its engineering-plastic elastic element provides cushioning, vibration damping, and wear resistance. It operates at temperatures from -35°C to +80°C and requires no maintenance. The elastomer is constrained by the convex jaws, preventing internal deformation caused by impact and external deformation caused by centrifugal force. The jaws’ large concave surfaces keep surface pressure on the involute teeth very low, preventing wear or deformation even under overload. Axial plug-in installation is quick and convenient. The nominal torque listed in the table is for an elastomer hardness of 98 Shore A. Made of 45 steel with a blackened finish; includes locking set screws.

DJ-B Enlarged-Bore Star Flexible Coupling
The DJ-B enlarged-bore star flexible coupling features steel hubs and is particularly suitable for heavy-duty drive units such as elevators and construction machinery. Its compact design provides low rotational inertia. Similar to the DJ-A model, it has larger bores. The table lists an elastomer hardness of 98 Shore A, a nominal torque range of 20–23,500 N·m, an allowable speed range of 2,000–19,000 rpm, and a bore diameter range of 6–220 mm. Bore configurations can be customized; the bore tolerance is H7/H8. Custom specifications are available.

GA-H Split Sleeve Coupling
The GA-H split sleeve coupling features a compact design and a star-shaped elastomer that transmits torque through keys and friction. Assembly and disassembly require only four bolts. The elastomer can be replaced without moving the drive or driven equipment, and the coupling can be installed and removed radially. Sizes range from 19 to 140, with maximum finished bore diameters from 20 mm to 140 mm. The bores at each end can be combined as required and are machined to standard H7/H8 tolerances. Suitable for heavy-duty drive units such as hoists and construction machinery. Custom designs are available to meet specific customer requirements.

GKM Type
The GKM-type jaw coupling features a double-section design with a three-piece, double-section construction. Its hubs are made of 45# steel, and its elastomer is made of polyurethane. It dampens vibration, reduces noise, and provides zero rotational backlash, making it suitable for forward and reverse rotation. It absorbs vibration, compensates for radial, angular, and axial misalignment, and extends the service life of adjacent components. A wide range of finished bore diameters is available (from 6 mm to 200 mm), with multiple sizes to choose from. Bore tolerances are H7/H8, and custom specifications are available. Product parameters include rated torque, dimensions (DH, E, S, b, LGKM, etc.), and misalignment compensation capacity.

DFG Stainless Steel Spider Coupling Series with Set Screws
DFG stainless steel spider couplings with set screws feature hubs made of SUS304 stainless steel for excellent corrosion resistance. The polyurethane elastomer is wear-resistant, oil-resistant, and electrically insulating. The zero-backlash design is suitable for applications requiring rotation in both directions. It absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy, and set screws secure the coupling. Custom bore sizes are available, with H7/H8 tolerances supported. A range of outer diameters and lengths is available to suit different torque and speed requirements.

DFCG Series Jaw Couplings
DFCG series stainless steel jaw couplings feature hubs made from SUS304 or 316 stainless steel for excellent corrosion resistance. The polyurethane elastomer spider is wear-resistant, oil-resistant, and electrically insulating. It absorbs vibration and compensates for radial, angular, and axial misalignment. Zero rotational backlash makes these couplings suitable for reversing applications. The removable design allows for easy installation, and the hubs are secured with set screws. A range of sizes is available, with outside diameters from 20 mm to 65 mm, lengths from 30 mm to 90 mm, and multiple bore sizes with H7/H8 tolerances. Rated torque: 4.2–164 N·m; permissible eccentricity: 0.02 mm; angular misalignment: 1°; axial misalignment: ±0.60 mm; speed: 6,000–17,000 RPM. Suitable for precision drive systems such as servo and stepper motor applications.

DPG Series Jaw Couplings
DPG Series Jaw Couplings use high-strength polyurethane flexible elements that are wear- and oil-resistant, offer high load capacity, and provide a long service life. Their simple design features compact radial dimensions, low weight, and low moment of inertia, making them suitable for medium- and high-speed applications. They provide substantial axial, radial, and angular misalignment compensation, require no lubrication, and need little maintenance. The split design makes installation and removal easy. Standard surface treatments are generally used; custom designs and special materials are available. These couplings are widely used in metallurgy, mining, petroleum, chemical processing, lifting, transportation, textiles and other light industries, as well as in water pumps and fans.

DFS-45# Steel Jaw-Type Set-Screw Coupling
The DFS-45# steel jaw-type set-screw coupling features 45# steel hubs and a polyurethane elastomer, with zero rotational backlash and suitability for bidirectional rotation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Its detachable design makes installation easy, and it is secured with set screws. The coupling has a simple structure, compact radial dimensions, low weight, and low rotational inertia, making it suitable for medium- to high-speed applications. The elastic element is wear- and oil-resistant, offers high load capacity and a long service life, and requires no lubrication. It is widely used in metallurgy, mining, petroleum, chemicals, lifting, transportation, light industry, textiles, water pumps, fans, and other industries.

DFCS 45 Steel Jaw-Type Clamping Series
DFCS 45 steel jaw-type clamping series couplings feature hubs made from 45 steel and zero backlash, making them suitable for forward and reverse rotation. The polyurethane elastomer offers excellent wear resistance, oil resistance, and electrical insulation. The central elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. The detachable design makes installation easy, and the coupling is secured with clamping screws. Product specifications: Model DFCS-30×40; material: 45 steel; surface finish: blackened; included hardware: cylindrical-head screws. Custom designs and special materials are available on request.

DGFN Type with Brake Disc
The DGFN-type coupling with brake disc belongs to the steel jaw-type clamping coupling series. It features grade 45 steel hubs and a polyurethane elastomer, with zero backlash, making it suitable for reversible drives. The elastomer absorbs vibration and compensates for radial, angular, and axial misalignment. Secured with clamping screws, its detachable design makes installation easy. The standard surface finish is black oxide. Custom designs and special materials are available to meet the needs of demanding operating conditions.

GZ-GKM Series Flexible Couplings
The GZ-GKM Series double-flex couplings feature a double-flex design that provides excellent misalignment compensation. They effectively absorb vibrations caused by shaft misalignment and reduce noise. Installation and removal require just four bolts, making them quick and easy. Standard spacers up to 250 mm long are kept in stock for fast delivery. These couplings are ideal for drive applications requiring substantial misalignment compensation and vibration damping, such as protecting adjacent components like bearings and seals and extending their service life. Axial distance, maximum finished bore diameter, and torque capacity vary by model.

CF-CFN Series Flange Couplings
This series comprises flange-type couplings in two models: CF-CFN and DF-DFN. They use a flange connection and are suitable for connecting shafts in transmission systems. Specific technical parameters and specifications are not provided in the catalog.

DF-DFN Series Flange Couplings
The DF-DFN series features a flanged coupling design. It uses a flange connection to join drive shafts.

GDR Intermediate Shaft
The GDR intermediate-shaft coupling is designed to connect shafts that are far apart and includes an intermediate shaft. Its double-joint design provides better misalignment compensation. It can be installed or removed radially without moving the driving or driven equipment. Maintenance is simple when split sleeves are used. The product is made of Grade 45 steel with a blackened finish and comes with set screws. Standard surface treatments are generally used, but custom designs and special materials are available to meet the requirements of demanding operating conditions.

NM Jaw Coupling
The NM series jaw coupling is a flexible coupling consisting of two cast-iron jaw hubs and a natural-rubber spider. Made using precision casting, it offers safe, quiet operation and complies with GB9439. Maximum torque is 125 kg·m. It accommodates shaft diameters of 7–75 mm and motor power up to 60 HP/45 kW. Available in multiple sizes, it has an outer diameter of 50–270 mm, a rated torque range of 1.3–417 kg·m, and an applicable speed range of 4,000–13,500 rpm. A sample part number is “NM50×50×51.5-7×7.” Custom bore options include a keyway (K), hexagonal bore (F), square bore (S), or splined bore (H).

Couplings
This series includes two types: L-type jaw couplings and DGF-type crowned gear couplings. L-type jaw couplings are made of ductile iron, 45# steel, or aluminum alloy, with a black-oxide finish and cylindrical screws. They effectively absorb shock loads, offer excellent oil retention, and require no maintenance. They provide a maximum torque capacity of 54.2 kg·m and allow radial misalignment of 0.3 mm, angular misalignment of 1°, and axial misalignment of +0.5 mm. DGF-type crowned gear couplings are made of 45# steel, with a black-oxide finish and set screws. Their crowned-tooth design provides excellent misalignment compensation. They are easy to install by axial insertion, allow wear to be inspected, and can be used to mount various fans. Finished bore tolerance is H7; keyway width tolerance is DIN 6885/1 JS9. DGF sizes range from 28 to 90, with outside diameters of 65–200 mm, lengths of 90–245 mm, and maximum finished bore diameters of 24–90 mm. Bore options include keyed (K), hexagonal (F), square (S), splined (H), and other custom shapes.

DGF Coupling
The DGF coupling features a crowned-tooth design that absorbs vibration and reduces noise. It offers excellent misalignment compensation, is easy to install by axial insertion, and allows wear to be visually inspected. Suitable for mounting a variety of fans. Finished bore tolerance: H7 per ISO standards; keyway width tolerance: JS9 per DIN 6885/1. Made of 45# steel with a blackened finish; supplied with set screws. Custom specifications are available.

HRC Jaw Coupling
The HRC series is a jaw-type flexible coupling made from high-quality cast iron with a black oxide finish. It is fitted with a highly resilient rubber spider that provides excellent shock absorption and vibration resistance for reliable power transmission. These are standard, general-purpose components with assured quality. Example model code: HRC-23.5×65-10×10, where 23.5 is the outer diameter (mm), 65 is the length (mm), and 10×10 indicates the bore diameters at both ends (mm). A range of sizes is available, with outer diameters from approximately 23.5 mm to 280 mm and corresponding variations in length. Bores can be machined to H7/H8 tolerances, and custom non-standard bore profiles are also available, including keyways, hexagonal, square, and splined bores. Set screws are included as standard. Suitable for general mechanical power transmission, with cushioning and vibration-damping properties.

DGAN Series Flexible Couplings
DGAN couplings with brake drums are designed to work with drum brakes. Made from high-quality cast iron, they feature a rubber elastic sleeve with excellent resilience and strong shock absorption for reliable power transmission. The standard surface finish is black oxide, and custom specifications are available. Sizes range from 38 to 125, with maximum finished bore diameters from 12 mm to 145 mm. A variety of dimensions are available, and bores are machined to standard H7/H8 tolerances. Suitable for shaft-end installation with high rotational inertia. The braking torque must not exceed the coupling's maximum torque. Dimensions can be modified to meet customer requirements.

Couplings with Brake Drum or Brake Disc DGAN/DGSB
This series includes DGAN couplings with brake drums and DGSB couplings with brake discs, designed for use with drum brakes and caliper brakes, respectively. Made from high-quality cast iron or steel with a blackened finish, they offer excellent wear resistance and reliability. Sizes range from 38 to 125, with the maximum finished bore varying by material. Custom specifications are available for every size to meet special operating requirements. The brake drum or brake disc must be installed on the shaft end with the greatest rotational inertia, and the maximum braking torque must not exceed the coupling’s maximum torque.

LM Jaw-Type Flexible Coupling
The LM Series Jaw-Type Flexible Coupling compensates for relative misalignment between two shafts and provides vibration damping and cushioning. It has a simple design, requires no lubrication, offers high load capacity, and is easy to maintain. Replacing the flexible element requires axial movement. It is suitable for coaxial drive shafts operating at medium speeds and transmitting medium torque, particularly where frequent starting and changes in rotation direction occur. It is not suitable for low-speed, heavy-load applications or locations with limited axial space where aligning the shafts after replacing the flexible element is difficult. The operating temperature range is -35°C to +80°C, and the nominal torque range is 16 N·m to 25,000 N·m. The coupling is made of No. 45 steel with a blackened surface finish and comes with set screws. Select a configuration based on the shaft bore diameter and length. The bore is machined to standard H7/H8 tolerances; custom specifications are available.

LM Series Jaw-Type Flexible Couplings
Jaw-type flexible couplings compensate for relative shaft misalignment and provide vibration damping and cushioning. They have a simple, lubrication-free design, high load capacity, and are easy to maintain. Replacing the elastomer requires axial movement. They are suitable for medium-speed, medium-torque drive systems with coaxial shafts, frequent starts, and frequent reversals, as well as components requiring high operational reliability. Operating temperature: -35°C to +80°C. Nominal torque range: 16 N·m to 25,000 N·m. Made of grade 45 steel with a blackened surface finish; supplied with set screws. The series includes models such as LM1, LM8, LM9, LM10, LM13, and LM14. Bore diameters can be freely combined, and keyways, splines, and other features can be added. Custom non-standard designs are available.