product — Page 94

M12/M8 Series Connectors

The M12/M8 series includes 3-pin M12, 3-pin M8 and 4-pin M8 receptacles and plugs for power, signal and differential signal transmission in industrial equipment. The M12 connectors use 15AWG power wires (1# red 24V+, 2# blue 0V), with 3# left vacant. The 3-pin M8 connectors carry signals such as 45S+/45S-/PE, while the 4-pin M8 connectors carry TX/RX differential signal pairs. The catalog lists corresponding receptacle and plug models and pin color assignments to simplify wire harness assembly and field wiring. These connectors are suitable for sensor, actuator, encoder and automation equipment interfaces.

M12022 Amplifier

M12022 Amplifier

The M12022 is an amplifier (signal conditioner) for sensor signal conditioning. It supports multiple analog output formats, including 0-10V, ±10V, and 0-5V voltage outputs and a 4-20mA current output, for compatibility with a variety of data acquisition systems. It supports RS485 and RS232 communication and has one input channel and one output channel, enabling simultaneous analog and digital signal transmission. Built-in TEDS functionality automatically identifies sensor parameters without calibration, simplifying on-site setup. Its slot-in rail-mount design makes installation easy and offers excellent value. It is suitable for amplifying, converting, and transmitting industrial sensor signals over long distances. An aviation connector with TEDS is available as an option for the sensor interface.

M3 Series Control Head Assemblies

M3 Series Control Head Assemblies

M3 series control head assemblies are replaceable operating heads for use with M5 series switches. They are available in roller plunger, one-way roller plunger, short lever, and long lever types. The control section is made of engineering plastic and aluminum alloy and is intended for manual operation; do not strike it with metal objects. Some switch bodies reset automatically, while the M5Y, M5HS, and M5PL require manual reset. Once the M5PL is latched, its knob must be turned to reset it. The M5L one-way roller switch can only be actuated in one direction (struck from right to left); impact in the opposite direction has no effect. During use, ensure that the reversing travel does not exceed the specified range to avoid damaging the switch. The control head assembly can be opened separately; see the dimensional specifications for details. Order codes include M3R05-P14A, M3R10-P14A, M3L05-P14A, M3L10-P14A, M3D210-P13A, and M3C210-P13A.

M5 Series Mechanical Valves (5/2-Way)

M5 Series Mechanical Valves (5/2-Way)

The Shannaisi (SNS) M5 series 5/2-way mechanical valves are mechanically operated pneumatic directional control valves. External mechanical forces from cams, rollers, levers, or push rods directly shift the valve spool to control the direction of pneumatic actuators such as cylinders. Each valve has five ports and two positions (5/2-way): one inlet, two working ports, and two exhaust ports. Mechanical contact switches the actuator between extension and retraction. The catalog page presents the shapes and dimensions of the available models only as illustrations in Figures 1–452. It does not list model codes, port threads, operating pressures, flow rates, or actuation methods in text. Consult the manufacturer's drawings and catalog to confirm the specifications before selecting a model.

M5 Series Limit Switches

M5 Series Limit Switches

M5 series limit switches feature a modular control head assembly that can be removed and replaced independently. The switch body supports two mounting methods: body mounting and raised plate mounting. The control components are made of engineering plastic and aluminum alloy and must be operated manually; do not actuate them by striking them with metal. Models are classified by reset method as automatic reset (M5B, M5C, M5D, M5PM, M5PF, M5PP) or manual reset (M5Y, M5HS, M5PL). Once the M5PL is latched, its knob must be turned to reset it. The M5L is a one-way roller switch that actuates only when struck from right to left; actuation in the opposite direction is ineffective. Control heads include R/L roller plunger, D short-lever, and C long-lever types, with respective order codes M3R05-P14A, M3R10-P14A, M3L05-P14A, M3L10-P14A, M3D210-P13A, and M3C210-P13A, compatible with M5R, M5L, M5D, and M5C bodies respectively. When an external force causes the switch to disengage, the changeover travel must not exceed the range specified in the control travel table, or the switch may be damaged.

M8 Series Connectors

M8 series connectors are 4-pin circular connectors for industrial equipment. This page provides their pin assignments and the product-side and client-side models. Pin 1 connects to the 24V+ positive supply, pin 2 to GND, and pins 3 and 4 are used for RS485A and RS485B differential communication, respectively. They are suitable for applications that require both 24V power and RS485 signals. The product side uses the M8P4AXM1B plug, which mates with the M8P4AXM1G socket on the client side. The source does not specify details such as rated current, rated voltage, protection rating, locking method, cable length, or operating temperature; these should be confirmed against the connector specifications when selecting a model. This series is commonly used for compact connections to sensors, actuators, controllers, and fieldbus devices.

MER-U3-L USB 3.0 Series

MER-U3-L USB 3.0 Series

The Daheng MER-U3-L series is a range of industrial cameras with USB 3.0 interfaces from Daheng Imaging. Featuring CMOS or CCD sensors, they offer resolutions from 640 × 480 to 5496 × 3672 pixels and frame rates of up to 860 fps. Available versions include monochrome, color, near-infrared (NIR), and polarized (POL). Sensor formats range from 1/4 inch to 1 inch, with pixel sizes from 1.25 μm to 5.86 μm. These cameras deliver high-speed data transfer, low power consumption, and excellent stability, making them suitable for machine vision, automated inspection, medical imaging, and other applications.

MHC2 Series Pneumatic Grippers

MHC2 Series Pneumatic Grippers

The MHC2 series consists of angular pneumatic grippers with two fingers that pivot open and closed around a fulcrum. They are suitable for gripping, turning and holding workpieces in position. Four bore sizes are available: 10, 16, 20 and 25mm. The grippers are available in double-acting (D) and single-acting (S) versions. Double-acting models open and close by alternately supplying air to ports on either side, while single-acting models use spring return. The operating medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.1~0.6MPa, the ambient temperature range is -10~60℃ (no freezing), and the maximum operating frequency is 180c.p.m. Opening and closing angle repeatability is ±0.01. Lubrication is not required; if lubrication is desired, ISO VG32 turbine oil No. 1 may be used. Effective gripping torque at 0.5MPa ranges from 0.10~1.36N·m, with corresponding opening and closing angles of 39°~316°; larger bores provide greater gripping torque and angles. Optional 3-wire or 2-wire solid-state magnetic switches, such as D-M9BL, can detect the open and closed positions. Mounting can be accomplished using either threaded holes or through-holes, but not both at the same time.

MHF2 Series Pneumatic Grippers

MHF2 Series Pneumatic Grippers

MHF2 series pneumatic grippers (parallel grippers) are used to grip, position, and transfer workpieces in automated equipment. Models such as MHF2-8D2, MHF2-12D1, MHF2-16D2, and MHF2-20D1 denote different bore sizes and design variants. Common bore sizes are 8, 12, 16, and 20 mm, with variants identified by codes such as D, D1, and D2. The catalog also provides a standard specifications table and port thread installation notation. The operating pressure is in the 0.15 MPa range. These grippers are suitable for small pneumatic fixtures, assembly lines, inspection stations, and similar applications.

MHF2 Series Compact Pneumatic Gripper

MHF2 Series Compact Pneumatic Gripper

The MHF2 Series compact pneumatic gripper is an actuator with a parallel-opening and -closing design, intended for gripping and handling workpieces in confined spaces. Its compact construction, reliable operation, and easy installation make it suitable for a wide range of equipment, including automated assembly, packaging, and inspection systems. Typically used with a pneumatic system, the gripper enables fast pickup and release. As the catalog does not provide specific technical data, consult the manufacturer’s detailed specifications for information such as bore size, stroke, and gripping force.

MHL2 Series Round Pneumatic Gripper

MHL2 Series Round Pneumatic Gripper

The MHL2 series round pneumatic gripper (parallel opening and closing type) is a wide pneumatic gripper designed for picking and placing workpieces. The example code on the catalog page contains the segments MHL2, size 16, type D, 1, and Y59A, which can be used to identify the bore or size, construction type, magnetic switch, and other configurations. Common specifications for this series include bore or size, opening and closing stroke, operating mode, port connection, and magnetic switch model. Refer to the complete catalog page for specific stroke, gripping force, operating pressure, and other values. This page provides only the series title and one example code; it does not include the full specification table.

MHL2 Series Pneumatic Parallel Grippers

MHL2 Series Pneumatic Parallel Grippers

The MHL2 series consists of pneumatic parallel grippers with two fingers driven by a common air chamber to open and close in sync, enabling parallel gripping, handling, and positioning of workpieces. The body has mounting holes and locating surfaces for direct attachment to a cylinder, slide table, or robot arm end, while side grooves accommodate magnetic switches to detect the fully open and closed positions. The catalog distinguishes models by bore size and provides dimensional drawings in millimeters for the MHL2-10D and MHL2-20D, with A~H denoting key overall and mounting dimensions such as body width, thickness, finger stroke, and mounting hole spacing. Bore size determines body size and gripping force. Select the bore based on workpiece weight, gripping point overhang, and required gripping force, and use a pressure regulator to control gripping force and prevent damage to thin-walled or fragile workpieces.

MHL2 Series Parallel Pneumatic Grippers

MHL2 Series Parallel Pneumatic Grippers

The MHL2 series consists of parallel-opening pneumatic grippers with dual-piston actuation and a rack-and-pinion mechanism. The two fingers open and close in synchronization, providing high repeat positioning accuracy and strong holding force. The long finger stroke is suitable for gripping larger workpieces. All models have built-in magnets and can be used with magnetic switches to detect fully open and closed positions. Bore sizes are 10, 16, 20, 25 and 32mm. The operating pressure range is 0.15~0.7MPa (22~100psi), proof pressure is 1.2MPa (175psi), operating temperature is -20~70℃, maximum operating frequency is 40 cycles/minute, and the port thread is M5×0.8. The cylinder requires no lubrication. Gripping force varies with bore size; the 32mm bore model provides approximately 228N. These grippers are suitable for parallel gripping of workpieces in automated assembly, handling, sorting and other applications.

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

The MHL2 series is a valve-type pneumatic gripper with two parallel jaws and double-acting operation. Its two fingers open and close synchronously along parallel straight paths to grip, hold, position, and transfer small workpieces. Bore sizes include Φ10, Φ16, Φ20, and Φ40, with two fingers on all models. Each bore size has a corresponding finger stroke, allowing selection based on workpiece size and required opening. Gripping force increases with bore size. Select the bore based on workpiece weight, center of gravity, and required gripping force, and select the opening and closing stroke based on the workpiece shape. The compact body can be operated through direct pneumatic connections and supports side and end mounting. It can be integrated with robotic arms, indexing tables, and conveyor lines in applications such as automated assembly, electronic component assembly, and semiconductor and automotive parts handling.

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

The MHL2 series valve-type pneumatic gripper features a parallel-opening-and-closing design and is suitable for gripping and handling tasks on automated production lines. Its compact cylinder design is easy to install and offers high precision and reliability. The model code includes parameters such as the series, bore size, type, number, and switch, allowing configuration to meet specific needs. The bore size is 16 mm; type D indicates double acting; the number is 1; and the switch model is Y59A. It is widely used in the electronics, automotive, food, and other industries.

MHS2 Series Angular Pneumatic Gripper

MHS2 Series Angular Pneumatic Gripper

The MHS2 series is an angular pneumatic gripper with a pivoting jaw mechanism. The catalog specifies a 180° opening and closing angle, making it suitable for gripping, turning and transferring small workpieces. The catalog example model MHS2-16-D-2-M9NL comprises the series code, a bore of 16, type D, 2 auto switches and the M9NL auto switch model. It can be used in automated gripping applications requiring position detection. When selecting a model, confirm parameters including bore size, opening and closing angle, operating pressure, port size, and the number and model of auto switches.

MHS2 Series Parallel Opening and Closing Air Gripper (Cylindrical Body)

MHS2 Series Parallel Opening and Closing Air Gripper (Cylindrical Body)

The MHS2 series is a parallel opening and closing pneumatic gripper with a cylindrical body, suitable for external and internal gripping. It is available in seven bore sizes: 16, 20, 25, 32, 40, 50, and 63 mm. The operating medium is air; operating pressure is 0.2~0.6 MPa for 16~25 mm bores and 0.1~0.6 MPa for 32~63 mm bores. At 0.5 MPa, external gripping force is 21~502 N and internal gripping force is 23~537 N. Manual stroke is 4~16 mm; maximum operating frequency is 120 cycles/min for smaller bores or 60 cycles/min for larger bores. Port thread is M3×0.5 or M5×0.8. M9P(V), M9N(V), and M9B(V) magnetic switches are available, with lead lengths of 0.5 m (no symbol) or 3 m (L). Gripping point distance: L=20 mm for Φ16~Φ25 and L=30 mm for Φ32~Φ63.

MHS3 Series Parallel Grippers

MHS3 Series Parallel Grippers

The MHS3 series three-jaw parallel gripper uses a double-piston mechanism to open and close its three jaws simultaneously, providing self-centering gripping of cylindrical, square, and other workpieces. Standard bore sizes are 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The gripper has a cylindrical body with M3×0.5 threaded holes and φ4.5 through-holes with flat-bottom counterbores on the mounting surface, allowing front or side mounting. Magnetic switches, such as the M9N, can be fitted to detect the open and closed positions. Powered by compressed air, the gripper is suitable for handling workpieces in automated assembly, material handling, sorting, and other applications.

MHT2 Series Toggle-Type Pneumatic Grippers

MHT2 Series Toggle-Type Pneumatic Grippers

The MHT2 series consists of toggle-type (pivoting) pneumatic grippers driven by a double-acting cylinder. Their force-multiplying toggle linkage provides high gripping force for handling heavy workpieces. The self-locking toggle mechanism maintains the grip even if air pressure is suddenly lost or the air supply is cut off, preventing the workpiece from falling. A built-in magnetic ring allows magnetic switches to be mounted directly to detect the open and closed positions of the fingers. Four bore sizes are available: φ32/φ40/φ50/φ63. The operating pressure range is 0.1~0.6MPa, and the ambient and fluid temperature range is 5~60℃. Lubrication is not required; if lubrication is used, use turbine oil No. 1 ISO VG32. The finger opening angle is -3°~28°, holding force at 0.5MPa is 12.4~106 N·m, and weight is 0.80~2.08kg. The model number combines the base model, including bore size, with the number and model of magnetic switches.

MHT2 Series Pneumatic Grippers (Angular/Toggle Type)

MHT2 Series Pneumatic Grippers (Angular/Toggle Type)

The MHT2 series consists of angular pneumatic grippers that use a toggle mechanism to grip workpieces. They are suitable for picking, gripping, and transferring workpieces in automated equipment. The catalog lists two models, MHT2-50D and MHT2-63D, with the suffix D identifying the basic version of the series. These grippers are often used with accessories such as magnetic switches to detect gripping status. Refer to the full catalog for specific gripping force, stroke, operating pressure, and port size specifications.

MHZ2 Series Miniature Air Grippers

MHZ2 Series Miniature Air Grippers

The MHZ2 series consists of compact pneumatic grippers for gripping, positioning, and handling small workpieces. The series offers double-acting and single-acting configurations. The catalog lists models including MHZAJ2-6D, MHZAJ2-6S, and MHZAJ2-6C, with an effective gripping force of approximately 3.3 N per finger and an opening and closing stroke of approximately 6.1 mm. Reference values for external and internal gripping forces are also provided. The body dimension table covers sizes 10, 16, 20, 25, 32, and 40, showing mounting holes, magnetic switch mounting slots, and major overall dimensions to simplify selection and installation. On single-acting models, the port on one side must serve as a breather port. These grippers are suitable for precision gripping of light loads in electronics, semiconductor, medical, and automated assembly applications.

MHZ2 Series Air Grippers

MHZ2 Series Air Grippers

The MHZ2 series consists of parallel-opening air grippers (pneumatic fingers) with synchronized parallel movement for gripping, holding, positioning, and handling workpieces. Magnetic switches can be fitted for position detection. The series includes the standard MHZ2, compact MHZA2, compact MHZJ2 with dust cover, and long-stroke MHZL2, with bore sizes of Φ6, Φ10, Φ15, Φ20, and Φ25 mm. Actuation options are double-acting D, single-acting normally open S, and single-acting normally closed C. Finger options include basic, side threaded-hole mounting, through-hole mounting in the opening/closing direction, flat fingers, and axial piping (single-acting). Gripper body options include end block with side piping E, end block with Φ4 quick-connect fitting W, end block with axial M5 port M, and end block with axial port and Φ4 hose fitting H. A two-position cam-operated version with 180° opening and closing is also available in bore sizes of 10/16/20/25 mm, for gripping thin workpieces or workpieces requiring a large opening angle.

MI1030 Instrument

MI1030 Instrument

The MI1030 is an instrument designed for use with factory automation equipment. Its key selection parameters are operating voltage, communication interface, and communication method. The operating voltage can be selected to match the on-site power supply, while combinations of communication interfaces and methods enable data exchange and status display with a host computer, PLC, or field sensors for centralized monitoring and parameter configuration. When selecting a model, first confirm the supply voltage, then choose the interface configuration based on the control system's interface type and communication method, such as bus or serial communication. The wiring terminals and communication protocol for the selected configuration must match those of the host system. Refer to the specification table on the relevant page for the voltage range, number of interfaces, communication rates, and other technical data.

MI1046 Weighing and Force Measurement Indicator

MI1046 Weighing and Force Measurement Indicator

The MI1046 is a digital display and control instrument for weighing and force measurement systems. Depending on the model, it operates on 12-30VDC/AC or 24VDC±30%, with a maximum power consumption of approximately 3~5W. It offers an accuracy class of 0.01%F.S., a signal input range of 0.4~6mV/V, an optional 0-39mV standard input, and an acquisition frequency of up to approximately 1280Hz. It supports digital calibration and magnetic code/wiring calibration, with zero drift of ±0.1μV/℃ and gain drift of ±5ppm/℃. It provides 2 digital inputs (2DI), 2 transistor outputs (2DO), and optional 2KV relay outputs. Communication is supported via RS485/TCP, with automatic baud rate adaptation from 4800~23040. Options include an 8-inch capacitive touchscreen with three/four-channel input, a USB data interface, data storage, and force deviation alarms, or a 2.4-inch display and DIN rail mounting. It is widely used for industrial weighing and force measurement in batching, packaging, testing machines, and other applications.

MI1054 Eight-Channel Instrument

MI1054 Eight-Channel Instrument

The MI1054 eight-channel instrument is designed for multichannel signal acquisition and monitoring in industrial environments. It operates on a 24VDC ±30% wide-range power supply, consumes a maximum of 5W, and supports 8 digital inputs. Its input channels accept both analog and digital signals, with an input signal range of up to 0.01%F.S. and an input signal accuracy of 0.3mV. It can acquire and distinguish weak microvolt-level signals from field sensors with fine resolution. Compact and easy to wire, it can be used with control cabinets, PLC systems, or host computers to monitor production-line equipment and aggregate and display multiple digital and analog signals. It serves as a front-end signal acquisition instrument in factory automation.

MS1001 Compression Load Cell

MS1001 Compression Load Cell

The MS1001 is a stainless steel compression load cell with a low profile, minimal deformation, compact dimensions, and high dynamic response frequency. It is suited to force measurement applications where installation space is limited and rapid response is required. Typical applications include automotive press fitting, automated assembly, consumer electronics testing, new energy product assembly, medical testing, mold assembly in robotics, and other industrial testing, measurement, and control systems. Key specifications for the series include rated capacity, output sensitivity, zero output, output resistance, insulation resistance, safe overload, ultimate overload, operating temperature range, zero temperature drift, sensitivity temperature drift, and temperature coefficient. The specification table on this page lists parameter names only; refer to the complete catalog or selection documentation for specific values. Select a model based on the rated load, installation dimensions, temperature drift requirements, and dynamic response needs of the press-fitting or assembly station.

MS1005 Series Compression Load Cells

MS1005 Series Compression Load Cells

The MS1005 series consists of stainless steel compression load cells featuring a low profile, minimal deformation, compact dimensions, and high dynamic response frequency. They can be customized to suit application requirements. They are suitable for industrial testing, measurement, and control systems used in automotive press fitting, automated assembly, 3C product testing, new energy product assembly, medical testing, robotics, and mold assembly. The catalog page lists rated capacity, output sensitivity, zero output, output resistance, insulation resistance, safe overload, ultimate overload, operating temperature range, zero temperature drift, and sensitivity temperature drift, but does not provide specific values.

MS1009-16 Compression Load Cell

MS1009-16 Compression Load Cell

The MS1009-16 is a compression load cell with a compact annular hollow, spoke-type, or disc-type elastic element. Its central through-hole or internal thread connects directly to a lead screw or load rod, making it suitable for force measurement and control in equipment with limited installation space. It has a rated range of 100~1000N, an output sensitivity of 1.5±20%mV/V, a zero output of ±5%F.S., a safe overload of 150%F.S., an ultimate overload of 200%F.S., a dynamic response frequency below 300Hz, and an IP65 protection rating. It is supplied with a Φ4×300mm cable. Typical applications include press-fit force monitoring in automated assembly, precision force measurement platforms, and lead screw thrust measurement. The main selection parameters are rated range, mounting interface (central through-hole or internal thread), and lead cable length.

MS1074 Series Compression Load Cells

MS1074 Series Compression Load Cells

The MS1074 series consists of stainless steel compression load cells characterized by low deformation and high dynamic response frequency. With an IP65 protection rating, they operate reliably in typical industrial environments exposed to dust and moisture. Their compact design makes them suitable for installation in confined spaces. They are widely used for force measurement and control in industrial manufacturing, research and testing, including static and dynamic measurement of pressure and weight. Key selection parameters include rated capacity, output sensitivity, insulation resistance, rated voltage, rated current, rated frequency, operating temperature and humidity. Refer to the manufacturer's official datasheet for specific values.

MS1H Series Servo Motors

MS1H Series Servo Motors

The MS1H series comprises industrial AC servo motors, with power ratings listed on this page including 100 W, 200 W, 400 W, and 750 W. The catalog includes base models without suffixes (such as ISMH1-10B30CB, which may be an OCR variant of MS1H1-10B30CB) as well as complete order numbers with suffixes such as A331Z (for example, MS1H1-20B30CB-A331Z-S), which distinguish configurations such as the encoder, brake, and shaft end. These motors are suitable for applications requiring high-precision positioning and dynamic response, including automation equipment, machine tools, and packaging machinery.

MS2003 Series Tension and Compression Sensors

MS2003 Series Tension and Compression Sensors

The MS2003 is a miniature tension and compression force/load cell made of stainless steel. Its compact size makes it easy to install, and it measures loads in both tension and compression. It has a rated range of 50~2000N, an output sensitivity of 1.0±10%mV/V, an output resistance of approximately 800~11000Ω, and an insulation resistance of ≥5000MΩ/100VDC. It is suitable for industrial automation applications such as automotive press-fitting, automated assembly, 3C product testing, new energy product assembly, medical testing, robotics, and mold assembly. The sensor can be used with various weighing and force measurement instruments and data acquisition systems. During installation, the force axis must be aligned with the loading direction to prevent lateral forces and bending moments from affecting measurement accuracy. Selection is based primarily on the rated load range, output sensitivity and resistance compatibility, available installation space, and cable exit configuration.

MS2008/MS2009 Series Miniature Tension and Compression Sensors

MS2008/MS2009 Series Miniature Tension and Compression Sensors

The MS2008/MS2009 series consists of miniature bidirectional tension and compression sensors made of stainless steel or aluminum alloy. They offer high accuracy, compression overload protection, and high-frequency dynamic response. The rated range is 10~500N, with an output sensitivity of approximately 2.0±10%mN/V, output resistance of 350±30Ω, safe overload of 150%F.S., ultimate overload of 300%F.S., excitation voltage of 5~15V, and maximum excitation voltage of 15V. Applications include button force testing for 3C products such as computers, switch and button testing, insertion and extraction force testing, medical testing, and other industrial testing, measurement, and control systems.

MS2009 Series Miniature Tension and Compression Load Cells

MS2009 Series Miniature Tension and Compression Load Cells

The MS2009 series consists of miniature bidirectional tension and compression load cells with stainless steel or aluminum alloy sensing elements. They offer high accuracy, compression overload protection, and high-frequency dynamic response. With rated capacities from 10-500N, they are suitable for key force testing on computers and 3C products, testing various switch buttons, insertion and extraction force testing, medical testing, and industrial testing, measurement, and control systems. The load cells withstand a safe overload of 150%F.S. and an ultimate overload of 300%F.S. The recommended excitation voltage is 5-15V, with a maximum of 15V. Output sensitivity is approximately 2.0±10%mV/V, and output resistance is approximately 350±30Ω. Their miniature design makes them easy to integrate into space-constrained force measurement fixtures for dynamic force acquisition and bidirectional tension and compression measurement.

MS2019 Spoke-Type Tension and Compression Sensor

MS2019 Spoke-Type Tension and Compression Sensor

The MS2019 is a spoke-type load cell for bidirectional tension and compression measurement. Its elastic element is made of alloy steel or stainless steel, allowing it to withstand both tensile and compressive forces for applications requiring bidirectional force measurement. Rated capacities range from 0.1~300T, with output sensitivity calibrated to 2.0±1%mV/V for both the 0.1~5t and 0.1~300t ranges. It offers a combined error as low as 0.03%F.S., an output sensitivity of ±1%F.S., and good insulation resistance. The capacity can be customized to suit operating conditions. Its low profile, rigid structure, strong resistance to off-center loading, and fast dynamic response make it suitable for materials testing machines, truck scales, hopper scales, and various industrial weighing and batching systems. It can also monitor press-fitting and gripping forces during production. The load is typically applied to the center of the spokes, and the sensor is secured using threaded holes on the bottom or side. It can be connected to a standard weighing indicator or transmitter to provide a standard signal output.

MS2029 Tension and Compression Load Cell

MS2029 Tension and Compression Load Cell

The MS2029 is a miniature tension and compression load cell made of aluminum alloy. It offers high accuracy, strong overload protection, and a high dynamic response frequency. The sensor measures both tension and compression with minimal deformation, making it suitable for high-frequency dynamic force measurement. Applications include button force testing on computers and other consumer electronics, switch and button testing, insertion and extraction force testing, medical testing, and other industrial testing, measurement, and control systems. The series also includes the MS2025 tension and compression load cell, available in stainless steel or aluminum alloy. It features minimal deformation and a high dynamic response frequency, and is primarily used in force gauges, automated assembly testing, medical testing, robotics, and a variety of industrial automation force measurement applications. Series specifications include rated capacity, output sensitivity, insulation resistance, safe overload, ultimate overload, compensated temperature range, operating temperature range, zero temperature drift, and sensitivity temperature drift. TEDS functionality is optional.

MS3003 Series Single-Point Load Cells

MS3003 Series Single-Point Load Cells

The MS3003 series consists of aluminum alloy single-point (single-point parallel beam) load cells, including the MS3002 and MS3003 models. Their aluminum alloy sensing element provides high accuracy, strong resistance to off-center loading, and stable return to zero. They are easy to install and can be screwed directly onto a scale body or mechanism. With an IP65 protection rating, they are suitable for environments with light moisture and dust, such as those found around dispensing and liquid filling machines. Typical applications include in-line weighing during dispensing and liquid filling, electronic scales, counting scales, electronic balances, and various industrial weighing and batching systems. Selection is based primarily on rated capacity (range), accuracy class, output sensitivity, excitation voltage, wiring configuration, and mounting hole dimensions. Models within the series have different capacities and dimensions; refer to the relevant model's catalog datasheet for these specifications.

MS3006/MS3007 Series Single-Point Sensors

MS3006/MS3007 Series Single-Point Sensors

The MS3006/MS3007 series comprises single-point load cells made of aluminum alloy, offering excellent stability, high accuracy, strong resistance to off-center loading, easy installation, and an IP65 protection rating. They are suitable for electronic scales, counting scales, electronic balances, and various industrial weighing systems, providing stable and reliable weight signal acquisition in common industrial weighing applications. The catalog does not specify electrical parameters such as rated capacity, sensitivity, or nonlinearity. Confirm these details against physical samples or the manufacturer's technical documentation when selecting a model.

Load Cells for MS3008

Load Cells for MS3008

This series of load cells is designed for use with MS3008 products. The sensing elements are made of stainless steel or alloy steel, providing good corrosion resistance and structural rigidity. They can be installed directly in testing machines, truck scales, hopper scales, platform scales, and various industrial weighing systems to convert weight signals into electrical outputs. Key specifications include a safe overload capacity of 150%F.S., a compensated temperature range of -30~70°C, an operating temperature range of -20~60°C, and both zero temperature drift and sensitivity temperature drift of 0.02%F.S./10°C. These characteristics ensure stable zero and sensitivity outputs over a wide range of ambient temperatures. Select a model based on rated capacity (measuring range), material (stainless steel or alloy steel), compatible instrumentation, and mounting interface. During installation, ensure that the direction of the applied load matches the sensor's calibration direction, and avoid off-center and lateral loads that could affect measurement accuracy.

MS3011/MS3029 Single-Point Load Cells

MS3011/MS3029 Single-Point Load Cells

The MS3011/MS3029 series consists of single-point load cells made of aluminum alloy with an IP65 protection rating. They offer high accuracy, a low center of gravity, easy installation, and good interchangeability. They are suitable for weighing equipment such as electronic scales, truck scales, and platform scales. The catalog lists two specific models, MS3011 and MS3029. The specifications table covers rated capacity, output sensitivity, nonlinearity, hysteresis, insulation resistance, maximum platform size, material, safe overload, compensated temperature range, and maximum excitation voltage. However, repeated OCR text in the supplied page prevented extraction of the specific values for each model. Refer to the specifications table in the original catalog when selecting a model.

MS3012/MS3015 Single-Point Load Cells

MS3012/MS3015 Single-Point Load Cells

The MS3012/MS3015 are single-point load cells with stainless steel or aluminum alloy sensing elements. They offer high accuracy, a low center of gravity, strong resistance to off-center loading, easy installation, and good interchangeability. The MS3012 has an IP65 protection rating and a maximum platform size of 50×50mm. It is widely used in price-computing scales, counting scales, and platform scales. The MS3015 is made of aluminum alloy and has an IP66 protection rating (the source also lists IP65). It is suitable for truck scales, counting scales, platform scales, and similar applications. Rated capacity ranges are 44~220kg and 50~1000kg. Nonlinearity, hysteresis, and repeatability are each 0.017%F.S.; 30-minute error is ±0.015%F.S.; zero output is ±2%F.S.; input resistance is 450±15Ω; output resistance is 350±3Ω; insulation resistance is ≥5000MΩ/100VDC; safe overload is 150%F.S.; ultimate overload is 200%F.S.; recommended excitation voltage is 5V, with a maximum of 12V; compensated temperature range is -10~40℃; operating temperature is -20~50℃; and temperature sensitivity drift is 0.03%F.S.

MS3040 Single-Point Sensor

MS3040 Single-Point Sensor

The MS3040 is an aluminum alloy single-point load cell offering high accuracy, easy installation, and good interchangeability. It is suitable for weighing equipment such as price-computing scales, counting scales, and platform scales, with a maximum platform size of 800×800 mm. The catalog lists parameters including rated capacity, accuracy class, output sensitivity, input/output resistance, insulation resistance, safe overload, ultimate overload, operating temperature range, temperature sensitivity drift, temperature coefficient, and excitation voltage/current/frequency/power. Refer to the product label or complete catalog for specific values.

MS3053 Series Force Sensors

MS3053 Series Force Sensors

The MS3053 series consists of custom force sensors made from aluminum alloy. They offer high accuracy, strong resistance to off-center loading, easy installation, and an IP65 protection rating. Designed for force measurement systems in semiconductor equipment such as die bonders, they provide stable measurement of small forces. The rated range is 100G, zero balance is ±5%F.S., output sensitivity is approximately 0.5-1.0mW/Ω±20%, and cable size is 2.5mm². The series includes structural variants such as MS3053-B2 and MS3053-C, which can be selected according to the available mounting space and direction of force.

MS370-100 Damped Handle

MS370-100 Damped Handle

The MS370-100 Damped Handle is designed for industrial cabinets, equipment panels, and similar applications. Made of 6063 aluminum alloy, it features a sandblasted anodized finish and is available in black or silver. Its built-in damping mechanism ensures smooth, gentle door operation while reducing impact and noise. Suitable for automation equipment, enclosures and cabinets, medical devices, and more. Easy to install, with an attractive appearance and a comfortable grip.

MS6023 Tension Sensor

MS6023 Tension Sensor

The MS6023 tension sensor is designed for a wide range of web tension control equipment and accurately measures the tension of materials such as metal sheet, paper, film, metal foil, and wire. Its compact design is easy to install, with measurement ranges from 100N to 1000N and matched-pair accuracy of 0.025%. Sensors are sold in pairs and require no individual compensation. Made from aluminum alloy or stainless steel, they offer excellent resistance to torsion and protection up to IP67 for use in demanding environments. Built-in mechanical stops provide overload protection of more than three times the rated capacity. Specifications include a rated range of 15~200kg, combined error of ±0.05%, power input of 10VDC/AC, output of 0~20mV, safe overload of 150%F.S., ultimate overload of 300%F.S., insulation resistance of ≥5000Ω, and operating temperature range of -30~100℃. Typical applications include rolling mills, looms, coaters, rewinders, slitters, laminators, printing presses, plastic film production lines, steel sheet processing lines, and wire and cable machinery. The sensor is also widely used in batch processing industries such as pharmaceuticals, chemicals, and food.

MS705 Series Cam Locks

The MS705 Series cam lock is an industrial lock manufactured by Dongguan Dele Hardware, designed for enclosures, distribution boxes, and similar equipment. It is available in several materials, including zinc alloy, SUS304 stainless steel, and SUS316 stainless steel. Surface finishes include chrome plating, matte black, and vibratory polishing to suit different environments. The lock cylinder features a dustproof design, and the lock uses internal positioning. Models in this series include the MS705-3A and MS705-3E, with configurations customizable according to the specific material code. These locks offer good corrosion resistance and an attractive appearance, making them widely used in industrial control and communications equipment.

MS8051 Series Rod-Control Lock

The MS8051 Series Rod-Control Lock is made of zinc alloy with a white sand-textured finish and a keyed-alike cylinder design. Standard models MS8051-1 and MS8051-1G are available, with custom configurations for non-standard requirements. Refer to the cutout drawing for product dimensions. The item codes are H002-00094 and HC02-01316, respectively.

MS830 Series Rod Lock

The MS830 Series Rod Lock, supplied by Dongguan Dele Hardware, is made of aluminum alloy or SUS304 stainless steel and features a RAL 7035 finish. The lock cylinder is available in black or as a triangular cylinder (keyed alike). The respective part numbers are HC02-00538 and HC02-01075. Suitable for industrial cabinets, automation equipment, and other applications requiring secure locking, with custom specifications available.

MS834 Series Rod Lock

The MS834 Series Rod Lock is made of zinc alloy with a black finish, and is available with or without rods. It is suitable for industrial cabinets, distribution boxes, and other applications requiring rod locking. Custom non-standard options are available to accommodate different cutout sizes.