product — Page 95
MS866 Series Panel Locks
The MS866 Series panel locks are made of carbon steel and come in a choice of black or white finishes. Measuring 94 × 108 mm, they are suitable for enclosures, cabinets, and custom-built equipment. The series includes three models—MS866-5, MS866-5E, and the compact MS866-5—to suit different installation spaces. Supplied by Dongguan Dele Hardware, these locks also support custom solutions for non-standard applications.

MS9007 Strain Sensor
The MS9007 strain sensor uses the resistance strain gauge principle and is easy to install with screws. It has an IP66 protection rating and is suitable for monitoring strain under dynamic and static loads on equipment such as cranes and presses. It has a rated strain range of 50μm/m, zero balance of ±2%F.S., output sensitivity of 1.5±10%V/V, non-linearity of 0.25%F.S., hysteresis and repeatability of 0.1%F.S. each, input/output resistance of 1000±10Ω, insulation resistance of ≥5000MΩ/100VDC, operating temperature of -20~60℃, and maximum excitation voltage of 15V.

MSH-D20X31 Series Aluminum Alloy Profiles
The MSH-D20X31 series aluminum alloy profiles are made from 6063 aluminum alloy and are available with a silver sandblasted anodized or black sandblasted anodized finish. They are suitable for light-duty structural frames, automation equipment frames, and similar applications.

MSH-D26X36 Aluminum Profile Series
The MSH-D26X36 series features 6063 aluminum alloy profiles with a cross-section measuring 26 mm × 36 mm. Available finishes include silver sandblasted anodizing and black sandblasted anodizing. Suitable for industrial frames, brackets, and other applications.

MV322 Series Mechanical Valves
The MV322 series mechanical valves are 5-port, 2-position (5/2-way) directional control valves. Mechanical actuators, such as rollers, knobs and push buttons, move the spool directly to change the flow direction without a solenoid pilot. The port size is G1/4". A wide range of actuator styles is available, including basic, roller, selector knob, locking push button, flat push button, raised push button and large round push button types, to suit different operating requirements. These valves are designed for manual or mechanical switching of pneumatic circuits in automated equipment and pneumatic control systems. They feature a compact design, reliable response and low actuation force.

MVS-180 Series Solenoid Valves
The MVS-180 series comprises compact pneumatic directional control solenoid valves, available in 3-port and 5-port configurations with 2 or 3 positions. Designed for air, they have an operating pressure range of 0.15–0.8 MPa (0–0.7 MPa for the low-pressure type, with an external pilot pressure of 0.15–0.8 MPa), a proof pressure of 1 MPa, an effective flow area of approximately 9–15 mm², and a response time of approximately 30 ms. Coil options include AC110V/220V 50/60Hz and DC24V, with power consumption of AC 3.7/3.1VA or DC 3W, a voltage tolerance of ±10%, and insulation class F. The ambient temperature range is -5~+50℃ (no freezing); the 5-port type has an Rc1/8 pipe connection, and each valve weighs approximately 120–190 g.

MVSC-220 Series Solenoid Valves
The MVSC-220 series solenoid valves are pneumatic directional control valves for use with air. The catalog lists models 3E1, 3E2, 4E1, 4E2, and 4E2C.P.R. Piping size codes include 8A, with 6A/8A available for some models. Port sizes include Rc1/4 and Rc1/8, Rc1/4. The series includes 3-port and 5-port configurations with 2 or 3 positions. These valves can be used for flow direction and on/off control in pneumatic circuits of automated equipment. When selecting a model, confirm the port size, number of ports and positions, coil voltage, and mounting method.

MVSC-260 Series Solenoid Valves
The MVSC-260 series comprises 5-port, 2-position and 3-position pneumatic solenoid valves for directional control of air. The piping size code is 8A, with an RC1/4 port size. The operating pressure range is 0.2–0.8 MPa (0.3–0.8 MPa for 3-position models), with a proof pressure of 1 MPa. The effective area is 18 mm² (16 mm² for 3-position models), response time is approximately 40 ms, and ambient temperature range is -5~+50℃ (non-freezing). Coil voltages include AC110V and AC220V at 50/60Hz, and DC24V, with a voltage tolerance of ±10% and Class F insulation. The series includes the 4E1 and 4E2 2-position models and the 4E2C.P.R 3-position model, weighing approximately 226 g, 314 g, and 444 g, respectively. They are suitable for directional control of pneumatic circuits in automated equipment.

MVSC-300 Series Solenoid Valves
The MVSC-300 series comprises solenoid valves (directional control valves) for air, including 3-port, 2-position models (3E1, 3E2, 3E1-NC/NO), 5-port, 2-position models (4E1, 4E2), and 5-port, 3-position models (4E2C closed center, 4E2P pressure center, 4E2R exhaust center). The operating fluid is air, with an operating pressure range of 0.2~0.8MPa (0.3~0.8MPa for 5-port valves), an effective area of 25~35mm², a response time of 50ms, and an ambient temperature range of -5~+50℃ (no freezing). Rated voltages are AC110V, AC220V (50/60Hz), and DC24V. Power consumption is AC=4.4VA, DC=5W, with a voltage tolerance of ±10% and insulation class F. The port size code is 10A, and the port size is Rc3/8. The explosion-proof version conforms to Eex m II T4. Weight ranges from 293g~565g, depending on the valve type.

MVSD-180 Series Solenoid Valves
The MVSD-180 series comprises pneumatic solenoid valves. The catalog provides dimensional drawings for two valve types: MVSD-180-3E1-NC/NC and MVSD-180-3E2. The valve body has three Rc1/8 ports, as shown, and two Φ3.2 mm through mounting holes. The drawings also indicate overall dimensions such as 95.5 and 105.4 mm. These valves are suitable for on/off control of pneumatic circuits in automated equipment. When selecting a valve, confirm the model code and functional configuration, such as normally closed or normally open. Consult the complete catalog to verify the coil voltage, operating pressure, and other parameters.

MXQ6 Series Pneumatic Slide Table
The MXQ6 series pneumatic slide table, also known as a pneumatic slide sleeve, is a compact, short-stroke pneumatic actuator commonly used in automated equipment for linear handling, positioning, pushing, pressing, and transferring small workpieces. The series includes MXQ6-10, MXQ6-20, MXQ6-30, MXQ6-40, and MXQ6-50 models, covering strokes from 10~50 mm. The dimensional table provides key dimensions (mm), including F, N, G, H, NN, GA, HA, I, J, K, M, Z, and ZZ. When selecting a model, check the load W, the distance between the load and the slide table (overhang) L1, the moment center position correction value An, the load mounting coefficient K, the maximum allowable axial distance Ema(J), and the allowable moment coefficient γ to ensure operation within the permitted load and moment limits.

MY1B Series Mechanically Jointed Rodless Cylinder
The MY1B series is a mechanically jointed rodless cylinder with a basic design and no switch rail, suitable for long-stroke linear drive applications where installation space is limited. Available bore sizes are 10, 15, 20, 30, and 40 mm, with stroke lengths selectable by model (300 mm in the example). The model code consists of the series number MY1B, bore, stroke, magnetic switch model, and number of switches. For example, MY1B 20 X 300 M9BW S indicates a 20 mm bore, 300 mm stroke, an M9BW magnetic switch, and S for 1 switch. Magnetic switch configurations include no switch, 2 switches, 1 switch, or n switches. A version without a switch rail is also available.

MY1H Series Mechanically Coupled Rodless Cylinders
MY1H series mechanically coupled rodless cylinders transmit force through a mechanical coupling that rigidly links the piston and slider. Unlike magnetically coupled rodless cylinders, they do not slip and offer greater resistance to offset loads and higher load capacity, making them suitable for long-stroke, high-rigidity linear drives. The model code consists of the series, bore, stroke, magnetic switch model, and number of magnetic switches. For example, MY1H 25 300 M9BW S denotes series MY1H, bore Φ25 mm, stroke 300 mm, and 1 M9BW magnetic switch. Piping configuration (unmarked standard type is the basic piping configuration) and linear guide type (unmarked standard type) can also be selected as needed. The cylinder body is typically made of aluminum alloy extrusion, with an integrated guide and dust seals for long-term reciprocating operation in general industrial environments. Cushions and magnetic switches can be installed at both ends to detect end-of-stroke positions. These cylinders are commonly used in automated handling, positioning, pushing, and cutting equipment.

MY1M Series Mechanically Coupled Rodless Cylinder (Slide Guide Type)
The MY1M series is a mechanically coupled rodless cylinder with a slide guide, designed for reciprocating linear motion applications requiring a long stroke, space-saving installation, and the ability to withstand some lateral loading. Available bore diameters are 10, 20, 25, 32, 40, 50, and 63 mm. The dimensional table provides installation and overall dimensions, including A, B, C, G, BH, HG, J, K, L, DL, LH, WL, M, MM, MW, and N, for sizes from 16 to 63 mm, facilitating structural design and guide installation. The mechanical coupling transmits thrust through a connection between the piston and slider, with no protruding piston rod, minimizing the space required at the ends. The slide guide improves guide rigidity and load capacity, making it suitable for automated handling, pushing, and positioning operations. The common specifications table on the original page does not provide values for operation type, operating fluid, maximum and minimum operating pressure, ambient temperature, flow rate and speed, stroke tolerance, or guide type. Consult the complete catalog or the manufacturer when selecting a model.

NA36 Series Desktop Network Security Application Platform
The NA36 Series Network Security Application Platform is available in two form factors: a 1U 19-inch rackmount model (NA363R/NA362R) and a 1U desktop model (NA362). It uses Intel Atom C3000 series processors (C3338/C3558/C3758), with an SoC-integrated chipset and support for Intel QAT hardware acceleration. Based on DDR4-2400 memory technology, the NA363R/NA362R supports up to 128 GB (four 288-pin R-DIMM/U-DIMM modules), while the NA362 supports up to 64 GB. All models support Non-ECC/ECC memory. For networking, they provide six Gigabit Ethernet ports and, depending on the processor model, two or four 10-Gigabit SFP+ optical ports. The platform features an onboard Intel I210 controller and Marvell 88E1543 PHY, supports network bypass (one or two pairs, optional), and includes a NIC expansion slot. The storage bay supports two 2.5-inch drives, with an optional 3.5-inch drive. The system is suitable for firewall, V

NA592/NA590 Series Rackmount Network Application Platforms
The NA592/NA590 Series comprises 1U, 19-inch rackmount network application platforms designed for centralized deployment in standard racks for applications such as enterprise/industrial edge access, security gateways, firewalls, and traffic processing. The series includes two models, NA592 and NA590, and supports multiple generations of Intel computing platforms: 14th/13th Gen Core (Raptor Lake), 10th Gen Core or Xeon W-1200 (Comet Lake), and 8th/9th Gen Core or Xeon (Coffee Lake/Coffee Lake Refresh). The systems feature an AMI SPI Flash BIOS, 2 × 288-pin U-DIMM memory slots, support for 2 × 2.5-inch HDDs, and USB 3.0 I/O. Optional features include 1 × PCIe x8, M.2 Key B 2242 / full-size expansion, and VGA display output. Power supplies are available in 300 W or 400 W options, with 100–240 VAC input.

NGC1.9 Series Gear Coupling
The NGC1.9 gear coupling is made of 45# steel and is available with nickel, chrome, zinc, or tin plating. It has a nominal torque of 16,000 N·m and a maximum permissible speed of 1,500 rpm. Bore diameters range from 80 to 130 mm, with several bore lengths available (60–95 mm). Designed for heavy-duty power transmission, the product can be custom-made to non-standard specifications or from special materials.

NN30 Series Double-Row Cylindrical Roller Bearings
The NN30 series comprises double-row cylindrical roller bearings designed for machine tools. With high rigidity and high-speed performance, they are suitable for supporting precision machine-tool spindles. Bearing bore diameters range from 25 to 170 mm, outside diameters from 47 to 260 mm, and widths from 16 to 67 mm. Both cylindrical bore (NN30) and tapered bore (NN30K, 1:30 taper) types are available. Bearings with the W33 suffix have an oil groove and lubrication holes in the outer ring for easier lubrication. They offer dynamic load ratings of up to 157 kN, static load ratings of up to 265 kN, and limiting speeds of up to 19,000 rpm. Reference weights range from 0.12 to 12.8 kg. These bearings comply with national standards and are widely used in CNC machine tools, machining centers, and other equipment.

NNU49 Series Cylindrical Roller Bearings
Double-row cylindrical roller bearings designed for machine tools, offering high radial load capacity, high rigidity, and high-speed performance. Suitable for machine tool spindles, precision machinery, and other applications. The series includes two types, NN3000 and NNU4900, with bore diameters of 25–190 mm, outside diameters of 47–280 mm, and widths of 16–74 mm. The suffix (K) indicates a tapered bore (1:12), allowing easier installation and clearance adjustment. Made from high-quality bearing steel and available in P0/P6 precision grades to meet different accuracy requirements. Basic dynamic load ratings: 26–565 kN; basic static load ratings: 30–1060 kN; limiting speeds: 3,000–19,000 rpm.

P-10GNA Series Network Card
The P-10GNA Series is a 10 Gigabit Ethernet network card with copper ports, supporting link speeds of up to 10,000 Mbps. It uses a PCI Express (PCIe) v2.1 x8 interface. The card features up to 64 virtual machine device queues (VMDq) and supports Receive Side Coalescing (RSC) to reduce CPU utilization. It also supports IEEE 802.x flow control and IEEE 802.1Q VLAN tagging, and includes large-capacity receive and transmit packet buffers. Its large heatsink ensures stable operation. Supporting both half-height and full-height configurations, it is suitable for industrial automation applications requiring high-speed network communications.

P-FL2 Side-Lit Area Light
The P-FL2 series side-lit area light guides light in from the sides through a light guide plate, providing uniform, diffuse illumination across a flat surface. It is suitable for measuring workpiece profile dimensions, detecting edge damage, and identifying contaminants in transparent objects. Its ultra-thin design can be customized in various sizes and wavelength ranges. Made with a special light guide material, it delivers excellent uniformity. Available in red, green, blue, white, and infrared. Wavelength ranges: red 620–630 nm, green 515–530 nm, blue 465–475 nm; white color temperature: 6000–10000 K. Standard voltage: 24 V. Power ranges from 3.4 W to 11.7 W. Recommended working distance: 0–100 mm. Standard cable length: 485 ± 15 mm; extension cables are available. RoHS compliant.

P-FLK2 Series Apertured Side-Light Guide Area Light
The P-FLK2 Series Apertured Side-Light Guide Area Light emits diffuse light coaxially with the camera. Its ultra-thin profile (approximately 20 mm) and specialized light-guide material provide excellent uniformity. It is suitable for applications such as defect inspection of metal parts, inspection of metal housings, and character recognition on large electronic components. Standard models operate at 24 V, with power ratings from 8.4 W to 30.3 W and a recommended working distance of 200–600 mm. Various sizes (length: 150–500 mm; width: 150–400 mm) and colors (red R, green G, blue B, white W, and infrared IR) are available for customization. Wavelengths: red 620–630 nm, blue 465–475 nm, green 515–530 nm, and white 6000–10,000 K. Rated life exceeds 60,000 hours for red and 30,000 hours for white (at 50% light-output depreciation). RoHS compliant.

P-PTF-400 Series Camera Mount
The P-PTF-400 Series camera mount is suitable for industrial and smart cameras. The clamp width is adjustable from 20 to 80 mm (20 to 110 mm for the P-PTF-400-02D). The standard height is 60 cm and can be customized. Vertical fine adjustment ranges from 0 to 81 mm, with a precision of 0.01 mm (±35 mm for the P-PTF-400-02D). The light source can rotate 360 degrees, and the mounting options are versatile. Horizontal extension ranges from 0 to 30 cm to accommodate different fields of view. The baseplate is made of aluminum alloy and measures 40 cm long by 32 cm wide (40 × 32 × 10 mm for the P-PTF-400-02D). The metal pole is 60 cm high. Lightweight and easy to assemble and disassemble, it is convenient to carry.

P0035 Series Quick Couplings (Male Body)
P0035 Series Quick Couplings (Male Body) are made of chrome-plated carbon steel and use NBR seals. They are suitable for air and operate at pressures from 0 to 30 bar and temperatures from -20°C to +80°C. Hardened surface treatment ensures up to 100,000 connection and disconnection cycles. Available in several male body codes (02 = 1/4", 02B = 5/16", 03 = 3/8", 04 = 1/2") and fitting types (PF female thread, PM male thread, PH push-in tube, PA quick-tightening nut) to suit different connection requirements.

P0042 Series Quick Coupling (Socket)
The P0042 series comprises German/Japanese-style quick-coupling sockets designed for one-handed operation and pneumatic line connections. These models feature male threads and complement the female-threaded P0039 series, which requires two-handed operation. A typical model code is P0042-02-AF; its segments may indicate parameters such as port size and thread type. Widely used in the pneumatic systems of automation equipment, these couplings provide a fast, reliable connection solution.

P14M Series Timing Pulleys
P14M series timing pulleys feature a parabolic tooth profile and are designed for high-torque precision drives. Materials include aluminum alloy (codes BLA and BLH) and 45 steel (codes BSY, BSP, and BSM). Surface finishes include natural anodizing, black oxide treatment, and electroless nickel plating. The tooth count is 20, and the tooth profile is 20. The nominal width range is 12–27 mm, the pulley shape range is 12–27 mm, and the bore size range is 12–32 mm. A variety of pulley codes are available to suit different shaft diameters and installation requirements. These pulleys are widely used in drive systems for CNC machine tools, automation equipment, industrial robots, and more.

P14M Timing Belt
The P14M timing belt is a metric curvilinear-tooth belt with a 14 mm pitch. Its curved tooth profile delivers high torque transmission and low noise. Belt pitch lengths are specified in metric units, and standard widths include 40 mm, 55 mm, 85 mm, 115 mm, and 170 mm. Common specifications include 966-P14M, 1176-P14M, 1246-P14M, and 1400-P14M, as well as full model numbers that include the width, such as 2030-P14M-115. It is suitable for industrial automation applications such as precision drives and conveyor lines.

P14M Polyurethane Timing Belt
P14M polyurethane timing belt with a P14M tooth profile, made from thermoplastic polyurethane with a belt body hardness of 92 Shore A. The tensile cords are available in galvanized steel wire or aramid cord. Standard widths are 40, 55, 85, 100, 115, and 150 mm. The belt is 10 ± 0.4 mm thick, with a length tolerance of ±0.8 mm/m and a standard roll length of 100 m. Custom colors (such as white or black) and tooth-side or belt-back coverings (nylon canvas or antistatic canvas) are available. Open-ended belts can be cut to length; spliceable belts can be welded into endless belts for conveying. After splicing, the maximum permissible load is 50% of the belt body’s load capacity. Tooth shear strength varies with speed, and the minimum number of teeth in mesh is 6. Bend requirements: for straight drives, the minimum pulley tooth count is 32; for reverse bends, the minimum pulley diameter is 250 mm. Maximum permissible load depends on belt width and tensile-cord material. Galvanized steel wire can support up to 228,000 N at a width of 150 mm; aramid cord has an elongation of 0.8%.

P3M Timing Pulley
The P3M timing pulley features a 3 mm pitch and a parabolic tooth profile, making it suitable for precision power transmission. Available materials include aluminum alloy (BLA: natural-color anodized; BLH: untreated) and 45 carbon steel (BSY: black oxide; BSP: electroless nickel plating; BSM: untreated). Products are configured by tooth count, nominal width, pulley shape, and bore specification. Examples include a B-type pulley and an NK10 bore.

P3M Timing Belt
The P3M timing belt features a curvilinear tooth profile and a 3 mm pitch, making it suitable for precision drive systems. This series is available with pitch lengths ranging from 174 mm to 480 mm, corresponding to 58 to 162 teeth. Belt widths can be selected as needed; 9 mm is one example. The belts use metric sizing, have a P3M tooth profile, and are available in a range of standard lengths. They are widely used in automation equipment, machine tools, packaging machinery, and other applications.

P3M Polyurethane Timing Belt
This series of P3M-tooth polyurethane timing belts is made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. The core cords are available in galvanized steel or aramid. The tooth surface and belt back can be left uncovered or covered with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 15, 20, 25, 30, and 50 mm. Thickness is 2.2 ± 0.2 mm, tooth profile tolerance is ±0.3 mm, and length tolerance is ±0.5 mm/m. Standard roll length is 100 m; custom lengths are also available. Belts are available in open-ended or spliced versions; standard products are shown in bold. They are widely used for linear transmission in automation equipment.

P5M Timing Pulley
The P5M timing pulley features a P5M parabolic tooth profile and is designed for high-precision drive systems. Common materials include aluminum alloy and 45C steel. Surface treatments include natural-color anodizing, black oxide treatment, and electroless nickel plating. Pulley codes are available in five variants—BLA, BLH, BSY, BSP, and BSM—corresponding to different materials and surface treatments. The tooth count, pulley width, and bore specifications can be selected to meet your requirements. Suitable for automation equipment, machine tools, packaging machinery, and other applications.

P5M timing belt
The P5M timing belt is a toothed synchronous belt with a 5 mm pitch, designed for precision transmission. The model number consists of the pitch length, tooth profile designation, and width, for example, 500-P5M-15. A variety of standard pitch lengths are available, including 225, 245, 420, 500, 510, 525, 535, 540, 1240, 1595, 2000, 2160, 2250, 2590, 2680, 2725, 2790, 2890, 2990, 3060, 3360, 3500, and 3680 mm. Choose from standard widths to suit your needs. This series offers high transmission accuracy, low noise, and wear resistance.

P5M Polyurethane Timing Belt
P5M polyurethane timing belt, available in open-ended or joined type. Made from thermoplastic polyurethane with a hardness of 92 Shore A. Choose from galvanized steel wire or aramid cord tensile members. The tooth surface and belt back are available uncovered, with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 15, 20, 25, 30, 50, and 100 mm, with load capacities varying by width (galvanized steel wire: 670–6700 N; aramid cord: 820–8200 N). Standard roll length is 100 m, with custom lengths available. Length tolerance: ±0.5 mm/m; thickness: 2.2 ± 0.2 mm. Suitable for high-precision synchronous drive applications.

P8M Series Timing Pulleys
P8M parabolic-tooth timing pulleys have an 8 mm pitch. They are available in aluminum alloy or 45Cr steel, with surface treatments including natural-color anodizing, untreated, black oxide, and electroless nickel plating. Nominal widths range from 12 to 27 mm, and bore sizes from 12 to 32 mm. Suitable for a variety of drive systems, they are offered in different materials and finishes to meet diverse operating requirements.

P8M Timing Belt
The P8M timing belt is a metric-profile synchronous belt with an 8 mm pitch. Pitch lengths range from 480 mm to 1,056 mm, with 12 standard sizes: 480, 600, 640, 800, 840, 896, 920, 960, 1,000, 1,032, 1,040, and 1,056 mm. Five standard widths are available: 15, 20, 25, 30, and 40 mm. It is suitable for industrial automation equipment requiring precise synchronized transmission and low noise, such as CNC machine tools, printing machinery, and packaging equipment. Made from high-strength polyurethane or rubber, the belt offers wear resistance, resistance to stretching, and a long service life.

P8M Polyurethane Timing Belt
The P8M polyurethane timing belt is made from thermoplastic polyurethane (TPU) with a hardness of 92 Shore A. It is available with galvanized steel or aramid cord tensile members. The tooth face and belt back can be supplied without fabric, or with green nylon fabric, black nylon fabric, or antistatic black fabric. Standard widths are 10, 12, 15, 20, 25, 30, 50, 85, and 100 mm, with maximum permissible loads ranging from 1,425 N to 14,250 N for galvanized steel cords. Aramid cords have slightly lower load capacity but greater elongation. Tooth shear strength varies with speed; the minimum number of teeth in mesh is 6. Minimum pulley tooth counts are specified for straight drives, reverse bends, and inside bends. Available in open-ended or spliced versions (joined tooth-to-tooth by welding to form an endless belt). The maximum tensile strength of a spliced belt is 50% of the belt body's strength, and the minimum splice length is 800 mm. Suitable for conveying and power transmission applications.
P9-1 Handle Series
The P9-1 Handle Series is an aluminum alloy handle product from Dongguan Dele Hardware. Made of aluminum alloy, it is available in two surface finishes: black anodized and silver anodized. The hole spacing is fixed at 40 mm, making it suitable for use on industrial equipment, cabinets, door panels, and other applications. The series supports custom specifications, and product codes vary by surface finish to flexibly meet different customer requirements.

PA12 Series Plastic Tubing
This series of plastic tubing is made from PA12 and manufactured using virgin imported PA12 material. The tubing has a smooth, uniform wall, stable dimensions, and a long service life. It offers excellent abrasion and weather resistance, elasticity, and low-temperature performance. Its low water absorption makes it resistant to hydrolysis. At room temperature (23°C), the working pressure is 2.0 MPa and the burst pressure is 5.5 MPa. The normal operating temperature range is -40°C to +120°C, with a recommended long-term temperature range of -30°C to +85°C. It is resistant to chemicals and suitable for media with a pH of 4–9. Applications include non-corrosive compressed gases, water, fuel oil, chemical solvents, and other fluids. Common sizes range from 4 mm to 12 mm in outer diameter and 2.5 mm to 10 mm in inner diameter, with a variety of options to suit different applications.

PA6M Series Nylon Tubing
PA6M series nylon tubing is made from brand-new imported PA6 material. It features a smooth, uniform inner wall, stable dimensions, and a long service life. The tubing offers high pressure resistance, rigidity, resistance to aging and wear, and excellent mechanical properties. At room temperature (23°C), the working pressure is 2.0 MPa and the burst pressure is 6.0 MPa. The normal operating temperature range is -30°C to +120°C; for continuous use, the recommended range is -20°C to +85°C. It is resistant to chemicals and suitable for media with a pH of 4–9. Applications include non-corrosive compressed gases, water, fuel oil, chemical solvents, and other fluids. The model code consists of “PA6M” followed by the outer and inner diameters (for example, PA6M0425 denotes an outer diameter of 4 mm and an inner diameter of 2.5 mm). Outer diameters range from 4 to 12 mm, and inner diameters from 2.5 to 10 mm.

PB1000A Series Diaphragm Pumps
The PB1000A series consists of diaphragm pumps, represented by model code PB101. A reciprocating diaphragm changes the volume of the pump chamber to transfer fluid. The fluid contacts only the pump chamber and diaphragm, making the pump suitable for fluids containing impurities, volatile fluids, or applications requiring a tight seal. It is widely used in suction, pressurization, and circulation circuits in automated equipment, analytical instruments, and medical and laboratory devices. Models are specified using three codes: model code (PB101 diaphragm pump body), thread type (Rc pneumatic female thread, N NPT American tapered pipe thread, or F G parallel pipe thread, to match pneumatic connections to regional or fitting standards), and option (blank for no add-ons, or 1 for an integrated solenoid valve that eliminates the need for an external valve and allows the air supply to be switched by an electrical signal). The catalog also lists compatible adapter kits for connection to external drives and piping. To order, select the suffixes according to the pipe thread type and whether an integrated solenoid valve is required.

PCB85 Series Single-Axis Linear Module
The PCB85 series single-axis linear module (belt-driven single-axis slide) uses a 46mm-wide timing belt and one 20×15 linear guide rail. It offers a maximum travel of 3800mm and a maximum speed of 2000mm, and is compatible with 400W/750W servo motors. Three reduction ratios are available: 5:1, 7:1, and 10:1, with corresponding leads of 40.00mm, 28.57mm, and 20.00mm. Effective travel is selectable from 100–3800mm in 100mm increments. Multiple folded motor mounting orientations are supported, including left, right, upper left, upper right, lower left, and lower right, as well as use as a synchronized driving axis in gantry systems. The module is suitable for long-travel, high-speed automated handling and positioning applications.

PCH10 Open-Loop Stepper Single-Axis Module
The PCH10 open-loop stepper single-axis linear module integrates a Ø16mm ball screw and a dual-row linear guide (2D×18, 1 rail) and is driven by an open-loop stepper motor. It is suitable for precision linear positioning, material handling, dispensing and other applications in automation equipment. Maximum stroke: 1050mm; maximum speed: 533mm/s; maximum static torque: 3N·m. Screw lead options are 05(5mm), 10(10mm), 20(20mm) and 32(32mm). Effective stroke is customizable from 50~1050mm in 50mm increments. Mounting options include exposed motor and motor folded down, left or right. A parameter table provides the corresponding L/A/M/N overall dimensions and total weight (KG) for each configuration. Model codes follow the sequence: base model-screw lead-stroke-specification code-motor specification-controller-accessories.

PICO318/PICO319 Series 2.5-inch Pico-ITX Embedded Single Board Computers
The PICO318/PICO319 series comprises 2.5-inch Pico-ITX embedded single board computers with an onboard SoC processor, designed for industrial control, edge computing, automation equipment, and space-constrained embedded applications. The PICO318 is based on the Intel Pentium N4200 or Celeron N3350/N3450 platform, while the PICO319 uses the Intel Atom x5-E3940 platform. Both support up to 8 GB of DDR3L-1867 memory. Onboard connectivity includes two Gigabit Ethernet ports, two USB 3.0 ports, two USB 2.0 ports, one DisplayPort++ and one LVDS display interface. They also feature one half-size PCIe Mini Card expansion slot and an M.2 Key B storage interface. The PICO318 operates from -20°C to +60°C, while the PICO319 supports a wide operating temperature range of -40°C to +70°C, making it suitable for demanding environments.

PL-H6(Z8) Locking Assembly Series
The PL-H6(Z8) locking assembly series provides a keyless shaft-to-hub connection. Tightening the DIN912-12.9 grade high-strength screws presses the inner and outer tapered surfaces together, generating radial expansion force and creating an interference fit between the shaft and hub. This transmits torque and axial force while providing accurate centering. The assemblies are easy to install and remove without damaging the shaft or hub surfaces, and can withstand high torque and impact loads. The series is available in a wide range of sizes, materials and surface finishes. Common materials include 45# steel and 40Cr alloy structural steel, with stainless steel available for special applications. Surface treatments include black oxide, zinc plating and phosphating. The catalog comparison table provides selection and verification parameters including model, nominal dimensions (mm), transmitted torque (N·m), axial force (N), contact surface pressure (N/mm²), locking screw specifications (DIN912-12.9 grade) and total weight (kg). Typical applications include shaft-to-hub connections in packaging machinery, machine tools, fans, conveying equipment and printing equipment.

PL45-G Series 45° Male Threaded Fittings
The PL45-G series consists of 45° male threaded pneumatic tube fittings with G threads, designed for installations where tubing must be routed at a 45° angle. They accommodate tube outside diameters of ΦD 4, 6, 8, 10, and 12 mm, with male thread sizes including G1/8, G1/4, G3/8, and G1/2. The catalog specifies overall lengths L1, L2, L3, and L4 and diameters ΦD1 and ΦD2 to help check clearances and select fittings for installation. Model numbers consist of PL45, a tube diameter code, and a G thread size code, such as PL45-04-G01, PL45-06-G04, and PL45-12-G04. These fittings connect pneumatic tubing of the corresponding outside diameter in automated equipment circuits. The material is not specified in the catalog.

PLCB10 Series Cleanroom Single-Axis Robot
The PLCB10 Series Cleanroom Single-Axis Robot is designed for clean environments such as cleanrooms. It offers several motor mounting configurations, including left-fold, right-fold, left-down-fold, and right-down-fold, to accommodate different space layouts. Its dust-resistant design ensures stable operation in clean environments. Featuring high precision and rigidity, this series is widely used in automation equipment for applications with stringent cleanliness requirements, including semiconductors, LCD panels, and medical devices. The effective stroke can be customized to meet specific needs; please refer to the detailed specifications for exact parameters.

PLCB14 Single-Axis Robot
The PLCB14 single-axis robot is designed for cleanroom environments and offers high positioning repeatability. The series supports left-fold or right-fold motor mounting, with effective strokes ranging from 100 mm to 1,550 mm. Lead and maximum speed depend on the specific configuration. With its compact design and strong load capacity, it is suitable for applications such as automated production lines and precision positioning.