product — Page 56

APLN Series Plastic Push-in Fittings

APLN Series Plastic Push-in Fittings

The APLN series consists of plastic push-in pneumatic fittings for quickly connecting tubing to female-threaded components in compressed air lines. The fitting body is made of engineering plastic, commonly in a nylon and nickel-plated brass composite construction. PU/PA tubing can be inserted directly into the push-in fitting to form a seal without tools, making installation and removal easy. The series is available in 6 sizes: tube outside diameters ΦD of 4, 6, 8, 10, 12, and 16 mm, with corresponding male threads M12, M14, M16, M20, M22, and M27. Overall length L ranges from 33.3 mm to 62.6 mm, width across flats H from 14~29 mm, and insertion-end bore Φd is 3.3 mm or 4.3 mm. Select the model from the reference table according to the tube outside diameter and mounting thread size. These fittings are suitable for pneumatic lines in automation equipment, pneumatic fixtures, packaging machinery, and similar applications.

APXG Series Plastic Push-to-Connect Fittings

APXG Series Plastic Push-to-Connect Fittings

Plastic push-to-connect fittings (one-touch pneumatic fittings) provide quick connections and branching for compressed air lines. Simply insert the tubing to lock it in place, and press the release ring to remove it. They are widely used in automated equipment, jigs and fixtures, and pneumatic actuator piping. This page covers the APXG straight, APL45 elbow, APXT/APPT tee, and APPF subseries, among others. They accommodate tubing with a ΦD outer diameter of 4, 6, 7, 8, 10, or 12 mm. Threaded ends are available with M5 and M6 metric threads and R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, and G1/2 pipe threads. Models are also offered in a range of dimensions, including L1~L4, ΦD1, ΦD2, and width across flats. Within each subseries, different tube diameter and thread combinations correspond to different part numbers. Select a fitting based on the tube outer diameter and connection thread.

APXT Series Plastic Push-in Fittings

APXT Series Plastic Push-in Fittings

APXT series plastic push-in fittings provide quick connections for pneumatic lines. Their bodies are made of engineering plastic, and they are suitable for nylon or polyurethane tubing with outside diameters of Φ4, Φ6, or Φ8. Thread options include R1/8, R1/4, R3/8, R1/2, G1/8, G3/8, and G1/2, accommodating connections to various lines and actuators. The fittings lock on insertion, are easy to disconnect, and provide a reliable seal. They are widely used in automation equipment, pneumatic control cabinets, and packaging machinery. Select the model according to the tube outside diameter and thread specification. The typical operating pressure is 0~1.0 MPa, and the operating temperature is approximately -20~60℃.

APPT Series Plastic Push-In Fittings

APPT Series Plastic Push-In Fittings

APPT series plastic push-in fittings provide quick connections for nylon, polyurethane and other tubing in pneumatic lines. Tubing locks in place when inserted and is easy to remove. The series accommodates three tube outside diameters: 4, 6 and 8 mm. Thread sizes include R1/8, R1/4, R1/2, G1/8, G3/8 and G1/2. These fittings are suitable for automation equipment, pneumatic control cabinets and general pneumatic piping. The catalog provides dimensions including L3, ΦD1, ΦD2, L, L1, L2 and φ to facilitate selection and installation.

AP Series Plastic Push-to-Connect Fittings

AP Series Plastic Push-to-Connect Fittings

Plastic push-to-connect fittings (pneumatic push-in tube fittings) provide quick connections between polyurethane or nylon air tubing in sizes such as Φ4, Φ6, Φ8 and Φ12 and M5 or M6 metric threads or R1/8~R1/2 and G1/8~G1/2 pipe threads. The body is made of engineering plastic, with a brass or engineering plastic retaining clip. The push-in design allows tubing to be installed and removed without tools. These fittings are widely used in pneumatic circuits, automation equipment, packaging machinery and electronic assembly lines. The catalog groups fittings by shape and connection type into sub-series including APL45 (elbow), APXG (male-threaded straight), APXT (male-threaded tee), APPT (branch tee) and APPF (straight). Key specifications include compatible tube outside diameter ΦD, thread size R or G, insertion depth, overall length L, outside swing dimensions ΦD1~ΦD4, width across flats φ and segment lengths L1~L4. Select the fitting to match the tube outside diameter and mating thread size. Operating pressure, temperature resistance and media compatibility are governed by general pneumatic fitting specifications.

ASC Series Speed Control Valves

ASC Series Speed Control Valves

ASC series speed control valves control the operating speed of cylinders and other actuators by adjusting the valve needle opening to change the airflow. The valve body is made of materials such as nickel-plated brass and zinc alloy. The plastic body and fitting body can rotate freely for easy adjustment of the tubing direction. The compatible fluid is air only (no other gases or liquids). The operating pressure range is 0.1~1.0 MPa, proof pressure is 1.5 MPa, and operating temperature is 0~60℃. The valves are suitable for PU and nylon tubing. Models cover metric tube diameters of 4, 6, 8, 10, and 12 mm and imperial tube diameters of 5/32, 1/4, 5/16, 3/8, and 1/2 inches. Thread sizes include G1/8, G1/4, G3/8, and G1/2 (G threads), and NPT1/8, NPT1/4, NPT3/8, and NPT1/2 (N threads). By installation type, the valves are classified as exhaust throttling valves (standard installation) and inlet throttling valves (reverse installation).

ASA/ASC Series Flow Control Valves

ASA/ASC Series Flow Control Valves

ASA/ASC series flow control valves (speed control valves) regulate the operating speed of pneumatic actuators such as cylinders. Rotating the adjustment wheel changes the valve opening for stepless speed control: clockwise closes the valve and counterclockwise opens it. The valve body and fitting body can rotate relative to each other, allowing tubing to be connected in any direction. The same valve provides meter-out control when installed in the standard orientation and meter-in control when reversed. The valve body, adjustment wheel and locking wheel are made of nickel-plated copper; the seals are nitrile rubber (NBR), the N-Holder is brass, the zinc sleeve is zinc alloy, and the compression ring is polyoxymethylene (POM). The operating medium is air, with an operating pressure range of 0.1~1.0MPa(15~150psi), a proof pressure of 1.5MPa(225psi), and an operating temperature of 0~60℃(32~140℉). The valves are compatible with PU and nylon tubing. G-thread (ASC…G), NPT-thread (ASC…N), and ASA series models are available in a range of tube sizes.

ARPC Series Pneumatic Push-in Straight Fittings

ARPC Series Pneumatic Push-in Straight Fittings

The ARPC series consists of pneumatic push-in straight fittings for quickly connecting 4 mm or 6 mm outside diameter tubing to threaded ports such as M5, R1/8, R1/4, R3/8 and R1/2. Model numbers combine the body size and thread specification, for example ARPC04-M5 and ARPC06-01. The catalog table lists D (compatible tube outside diameter), R (thread specification), and overall and mounting dimensions such as A, B, S and X, making it easy to check available space and port positions when selecting a fitting. The series is suitable for compressed air systems requiring frequent connection and disconnection or rapid assembly, and connects directly to matching threaded ports.

ARPL Series Push-In Elbow Fittings

ARPL Series Push-In Elbow Fittings

The ARPL series consists of L-shaped (90° elbow) push-in pneumatic tube fittings for connecting 4 mm and 6 mm outside diameter nylon or polyurethane tubing at a right angle to threaded ports on pneumatic components. One end has a push-in collet that allows the tube to be inserted or removed without tools by pressing the release ring. The other end is threaded, with common thread sizes including M5, R1/8 (code 01), R1/4 (code 02), R3/8 (code 03), and R1/2 (code 04). The model code is “ARPL + tube diameter code (04/06) + ‘-’ + thread code”. The series also includes design variants such as ARPL-G and ARPL-N. Select the fitting according to the tube outside diameter and the threaded port on the component. The fittings are suitable for compressed air. During installation, control the thread tightening torque and ensure that the retaining spring and release ring return fully to position to prevent air leaks.

EG Series Linear Guideways

EG Series Linear Guideways

EG Series linear guideways are designed for linear motion in industrial automation equipment. The range includes the EGH-SA, EGH-CA, EGW-SA, and EGW-CA subseries. Manufactured to high-precision standards, these guideways offer high rigidity, low friction, and long service life, making them suitable for a wide range of precision positioning and conveying applications. They are available in multiple sizes, with a broad range of dynamic and static load ratings to meet different load requirements. For mounting dimensions and performance specifications, see the catalog dimension tables.

FHVFS Series Hand Valves

FHVFS Series Hand Valves

The FHVFS series consists of manually operated pneumatic shutoff valves (hand valves) used to turn the compressed air supply to pneumatic equipment on or off. When a three-way hand valve is closed, it shuts off the air supply and vents residual downstream pressure, allowing safe maintenance and periodic inspection. Two-way hand valves do not have an exhaust function and are suitable for applications such as air tanks where pressure relief is not required. The permitted medium is air only; do not use other gases or liquids. Valve body connections are available in two types: threaded ports (R1/8, R1/4, R3/8, R1/2, G1/2) and push-in hose connections (for Φ6~Φ12 hoses). Nominal bore sizes include Φ6, Φ8, Φ10 and Φ12. The overall valve body length L is approximately 58~76 mm, and the body height C is 42.6 mm or 47 mm. The model suffix B indicates a two-way valve. An FHVFS-G handle configuration is also available with the same connection codes and slightly different overall dimensions.

FHVSG Series Check Valve Fittings

FHVSG Series Check Valve Fittings

The FHVSG series check valve fitting is a push-in pneumatic fitting with a one-way valve that prevents reverse airflow in pneumatic lines. When the air tube is disconnected, the fitting automatically shuts off the airflow to prevent air from escaping. Airflow resumes only when the tube is reinserted and connected. It is particularly suitable for workstations where air tubes are frequently replaced or connected and disconnected. The fitting is designed for air only, excluding other gases and liquids. It has an operating pressure range of 0~1.0MPa (150psi), a vacuum rating of -100kPa (-29.5 in.Hg), and an operating temperature range of 0~60℃. It is compatible with PU and nylon tubing. The fittings are available with G (BSPP) parallel pipe threads or R (PT) tapered pipe threads, in combinations of port sizes (1/8, 1/4, 3/8, 1/2) and tube outside diameters (6~16mm). Model numbers consist of FHVSG, a connection size code, and a tube code, with two variants: FHVSG (R thread) and FHVSG-G (G thread).

FHVSF-G Series Check Valve Fittings

FHVSF-G Series Check Valve Fittings

FHVSF-G series check valve fittings are designed for pneumatic lines. They automatically stop air from flowing out of the fitting when the tube is disconnected and restore airflow when it is reinserted, making them suitable for applications where tubing is frequently changed. The operating fluid is air only; other gases and liquids must not be used. Operating pressure is 0~1.0 MPa (150 psi), vacuum pressure is -100 kPa (-29.5 in.Hg), and operating temperature is 0~60℃ (32~140℉). The fittings are compatible with PU and nylon tubing. Models cover G1/8, G1/4, G3/8 and G1/2 threads and fit tube diameters of 6, 8, 10, 12, 14 and 16 mm. Two-way, three-way and R/G threaded variants are available.

FHVSG-G Series Check Valve Fittings

FHVSG-G Series Check Valve Fittings

FHVSG-G series check valve fittings are used in pneumatic lines. They automatically prevent air from escaping when the tube is disconnected and allow flow to resume only when the tube is reinserted, making them suitable for applications requiring frequent tube changes. The working fluid is air only (no other gases or liquids). Operating pressure is 0~1.0MPa, vacuum pressure is -100kPa, and operating temperature is 0~60℃. The fittings are compatible with PU and nylon tubing. Body sizes range from 01~04, tube diameters include 6, 8, 10, 12, 14 and 16mm, and thread sizes include G1/8, G1/4, G3/8 and G1/2. Two-way (B) and three-way configurations are available, with mounting dimensions specified for L, A, B1, B2, C, Φd, H1 and H2.

FSPC Series Straight Push-in Fittings

FSPC Series Straight Push-in Fittings

FSPC series straight push-in fittings are pneumatic line connectors used to quickly connect PU or nylon tubing to male-threaded ports. Their straight-through design allows easy connection and disconnection, making them suitable for applications where air tubing must be replaced frequently. The compatible fluid is air only (no other gases or liquids). The operating pressure range is 0~1.0 MPa (150 psi), vacuum pressure is -100 kPa (-29.5 in.Hg), and operating temperature is 0~60℃ (32~140℉). Compatible tubing materials are PU and nylon. Models combine tubing outside diameter ΦD (4, 6, 8, 10, 12 mm) with thread sizes R1/8, R1/4, R3/8, R1/2. The model code is FSPC [tubing outside diameter]-[thread size]. The table lists dimensions including L1, L2, Φp and φ to help with selection and installation.

FSPC Series Check Valves

FSPC Series Check Valves

FSPC series check valves are used in pneumatic circuits to allow compressed air to flow in one direction only, preventing reverse flow. They are commonly used wherever one-way airflow is required. The operating medium is air only; other gases and liquids must not be used. The operating pressure range is 0.05~1.0MPa (150psi). Models are classified by nominal bore and include FSPC04, FSPC06, FSPC08 and FSPC10. Port threads include G1/8, G1/4, G3/8, R1/8, R1/4, R3/8 and R1/2. Dimensions (ΦD, ΦD1, L1, L2, L3, Φp, L) vary by model. During installation, tighten the screws to the specified torque. Overtightening may cause the valve to malfunction.

APC/FPCVC Series Mini Fittings

APC/FPCVC Series Mini Fittings

Mini tube fittings are ultra-compact pneumatic push-in fittings approximately 40% smaller than standard pneumatic fittings. Their ultra-small oval release rings make tube insertion and removal easy. They are suitable for air piping systems using PU or nylon tubing. The body is brass, the locking claws are stainless steel, the retaining ring is polyoxymethylene (POM), and the seals and O-rings are nitrile rubber (NBR). Technical specifications: fluid: air only (not for use with other gases or liquids); operating pressure range: 0~1.0MPa (150psi); vacuum pressure: -100kPa (-29.5 in-Hg); operating temperature range: 0~60℃ (32~140℉). The series includes APC straight fittings (tube diameters: 3/4/6mm; threads: M3×0.5, M5×0.8, M6×1.0, R1/8, R1/4, G1/8, G1/4) and FPCVC fittings (tube diameters: 4/6/8/10mm; threads: M5, M6, R1/8, R1/4, R3/8; models available in (B) variants). Select the model based on the combination of tube outside diameter and connection thread size.

APLC-C Series Pneumatic Push-in Fittings

APLC-C Series Pneumatic Push-in Fittings

The APLC-C series consists of miniature pneumatic push-in fittings for tubing with outer diameters of Φ3, Φ4, and Φ6 mm. Thread options include M3×0.5, M5×0.8, M6×1.0, R1/8, G1/8, and G1/4. Model numbers consist of APLC, the tube diameter code (03/04/06), the thread code, and the suffix C. The model table provides overall and mounting dimensions, including L1, L2, L3, ΦD1, and φ. These fittings provide compact connections for small pneumatic actuators, valve manifolds, and piping systems. When selecting a model, confirm the tube outer diameter, thread specification, and available installation space.

APLL-C Series L-Type Push-in Threaded Elbow

APLL-C Series L-Type Push-in Threaded Elbow

The APLL-C series is an L-type push-in threaded elbow (pneumatic fitting) for 90° connections with pneumatic tubing of Φ3, Φ4, or Φ6 mm outside diameter. Thread options include M3×0.5, M5×0.8, and M6×1.0 metric threads, as well as R1/8, G1/8, and G1/4 pipe threads. Model numbers consist of “APLL + tube diameter code (03/04/06) + thread code (M3C/M5C/M6C/01C/G01C/G02C)”; the final C identifies the series. For each model, the catalog specifies dimensions including ΦD (applicable tube outside diameter), R (thread size), L1 (thread engagement length), L2, L3 (overall length), ΦD1 (hex width across flats), and φ (through-hole/mounting-hole diameter). These dimensions can be used to check for tubing interference and available installation space. Three tube diameters and six thread sizes cover 13 standard models, suitable for compact tubing layouts and quick assembly and removal in automated equipment pneumatic systems.

APB Series T-Type Push-to-Connect Tee Fittings

APB Series T-Type Push-to-Connect Tee Fittings

The APB series consists of male-threaded T-type push-to-connect pneumatic tee fittings for splitting one air line into two and connecting to threaded components such as solenoid valves, cylinders, and manifolds. They accommodate tubing with an outside diameter ΦD of 3 mm or 4 mm. Connection threads include M3X0.5, M5X0.8, and M6X1.0 metric fine threads, as well as R1/8, G1/8, and G1/4 pipe threads. Dimensions provided for installation clearance checks include L1 (effective thread length), L2 (length from the threaded end to the body center/branch), L3 (overall length), ΦD1 (body outside diameter), and hex width across flats φ (8 mm, 14 mm). The fitting body uses a push-to-connect locking mechanism and allows slight axial rotation after tubing installation, making routing easier in confined spaces. Metric threaded ends screw directly into valve body ports, while pipe-threaded ends use appropriate seals. Model designations combine APB, the nominal diameter (03/04), and the thread code. There are 8 standard models, all stocked for immediate delivery.

MGN Miniature Linear Guide Rail Series

MGN Miniature Linear Guide Rail Series

The MGN miniature linear guide rail series features high-precision, low-friction linear motion components designed for applications such as compact automation equipment, precision instruments, and medical devices. The series is available in a range of sizes, including MGN5, MGN7, MGN9, and MGN12. Each size comes in C and H accuracy grades to meet different load and rigidity requirements. Made from high-quality steel, the rails feature compact carriages, high rigidity, low noise, and a long service life. Standardized mounting dimensions make replacement and maintenance easy.

APOC-C Series Pneumatic Push-in Fittings

APOC-C Series Pneumatic Push-in Fittings

The APOC-C series consists of pneumatic push-in fittings. The catalog includes APLC-C, APLL-C, APB and other configurations for quickly connecting tubing to threaded ports in automated pneumatic systems. They accommodate tubing with outside diameters of Φ3, Φ4 and Φ6 mm, with thread sizes including M3×0.5, M5×0.8, M6×1.0, R1/8, G1/8 and G1/4. Straight, elbow and branch configurations are available. The table provides overall and mounting dimensions such as L1, L2, L3, ΦD1 and φ to facilitate selection and layout. These fittings are suitable for tubing connections to pneumatic actuators, valve manifolds and various pneumatic control circuits.

AP-C Series Pneumatic Push-in Fittings

AP-C Series Pneumatic Push-in Fittings

The AP-C series is a family of push-in fittings for pneumatic lines. The C-suffix range is divided by configuration into subseries including APM-C, APV-C, APU-C, APE-C, APY-C and ASC-C. It includes straight, reducing, tee and threaded fittings for quick connection and disconnection of pneumatic tubing to cylinders, solenoid valves and air preparation units. The fittings accommodate tubing with outside diameters of Φ3, Φ4 and Φ6 mm. Thread sizes include M3×0.5, M5×0.8, M8×1, M10×1 and M12×1; straight fittings with fine-pitch male threads from M8×1 to M12×1 are also available. The catalog provides outside diameters ΦD, ΦD1, ΦD2, Φd and Φd1 and length dimensions such as L and L1~L4 for each subseries. It also lists reducing tees such as APY04-03C and APY06-04C and tube-to-thread combinations such as ASC03-M5C and ASC06-M3C, making it easier to select fittings by tube diameter and thread size.

APV-C Series Equal-Diameter Straight Push-in Fittings

APV-C Series Equal-Diameter Straight Push-in Fittings

The APV-C series consists of equal-diameter straight push-in pneumatic fittings for quickly connecting two pneumatic tubes with the same outer diameter. The sizes listed on this page cover tube outer diameters of 3 mm, 4 mm, and 6 mm, with corresponding body outer diameters of 7.3–11.3 mm, overall lengths of 12–15.6 mm, and insertion depths of 5–6.8 mm. The push-in locking mechanism allows easy connection and disconnection. These fittings are suitable for automated equipment, pneumatic control circuits, and compressed air lines. Select a model that matches the tube outer diameter, and check the operating pressure and medium compatibility.

APU-C Series Pneumatic Push-in Fittings

APU-C Series Pneumatic Push-in Fittings

The APU-C series consists of miniature pneumatic push-in fittings (Type C). Together with the APM-C, APV-C, APO-C, APY-C and ASC-C subseries shown on the same page, they form a family of miniature tube fittings organized by tube outside diameter. They accommodate tube outside diameters of Φ3, Φ4 and Φ6 mm and are available with metric threads including M3×0.5, M5×0.8, M8×1, M10×1 and M12×1. Reducing sizes such as APY04-03C, APY06-04C and APG04-03C are also available. The catalog defines each model by dimensions including ΦD (tube outside diameter), ΦD1/ΦD2 (outside diameter), Φd/Φd1 (inside diameter), L/L1/L2/L3/L4 (section lengths) and M (thread), allowing direct selection based on installation space and tube diameter. These fittings provide quick connections between tubing and cylinders, solenoid valves and air preparation components in automated pneumatic circuits. Installation requires no tools, enabling fast assembly and maintenance.

AP-C Series Miniature Connectors

AP-C Series Miniature Connectors

The AP-C series consists of miniature precision components for connecting, adapting, and mounting. The catalog groups them into subseries including APM-C, APV-C, APU-C, APE-C, APY-C, and ASC-C. Body diameters are primarily available in ΦD 3, 4, and 6 mm, with M3×0.5, M5×0.8, M8×1, M10×1, or M12×1 threaded interfaces. Some versions have through-holes, such as Φ3.2 and Φ3.5, for screw mounting. The catalog defines each version using overall and mounting dimensions such as ΦD, ΦD1, ΦD2, Φd, Φd1, L, L1~L4, and φ. Lengths range from approximately 8.5~34 mm, accommodating adapter and fastening requirements in compact mechanisms. To select a product, first choose the subseries and basic model by body diameter and thread size, then check that mounting dimensions such as L and L1 fit the available space. Material, surface treatment, and allowable load are not specified in the catalog.

AP-C Series Miniature Pneumatic Tube Fittings

AP-C Series Miniature Pneumatic Tube Fittings

The AP-C series comprises push-in fittings for miniature pneumatic and fluid lines, compatible with tubing of Φ3, Φ4 and Φ6 mm outside diameter. Connection thread sizes include M3×0.5, M5×0.8, M8×1, M10×1 and M12×1. The series is divided by function and configuration into APM-C (threaded connection, 10/12/14 mm hex across flats), APV-C and APU-C (straight, equal-diameter or reducing configurations), APE-C and APY-C (branch/Y configurations, including Φ4-Φ3 and Φ6-Φ4 reducing combinations), and ASC-C (female-threaded connection) subseries. The catalog provides complete dimensional specifications, including ΦD (tube diameter), ΦD1/ΦD2 (mating outside diameter and through-hole diameter), L/L1~L4 (individual section lengths), and M (thread size), allowing users to select fittings directly by tube diameter and thread size.

ASC-C Series Vacuum Suction Cups

ASC-C Series Vacuum Suction Cups

The ASC-C series consists of small vacuum suction cups (nozzles) with male threaded mounting. Suction cup diameters are Φ3, Φ4, and Φ6 mm, with M3×0.5 and M5×0.8 thread options. Model numbers combine the suction cup diameter and mounting thread, such as ASC03-M3C, ASC04-M5C, and ASC06-M3C. Body dimensions range from L1 11.5~12.0 mm, L2 29.5~31.5 mm, L3 15~19.5 mm, and L4 10.0~11.3 mm. They are suitable for vacuum handling of small workpieces and electronic components, as well as precision assembly.

AS-L Self-Locking Speed Control Valve

AS-L Self-Locking Speed Control Valve

The AS-L self-locking speed control valve regulates the speed of pneumatic actuators. Its self-locking design holds the adjustment in place once set, reducing flow changes caused by vibration or accidental operation. Common models in this series include AS1201F-M3/M5/M6, compatible with Φ3~Φ6 pneumatic tubing. The catalog provides tube outer diameter and installation and overall dimensions, including R, K, L, EA, EB, C, PA and PB, to assist with selection and layout in pneumatic piping systems.

AS Series In-Line Speed Control Valves

AS Series In-Line Speed Control Valves

AS series in-line speed control valves include AS-L self-locking, AS in-line, AS labeled in-line, and AS self-locking in-line designs. They accommodate Φ3~Φ6 mm pneumatic tubing, with model numbers indicating port thread sizes such as M3, M5, and M6 and tube diameters. Catalog tables provide overall and mounting dimensions including R, K, L, EA, EB, C, PA, PB, H, and A, K, P, E, C, J, and JC to simplify piping layout, selection, and replacement. They are suitable for flow regulation and speed control in pneumatic circuits, including applications requiring self-locking or identification.

AS Series Labeling Machine Tube Fittings

AS Series Labeling Machine Tube Fittings

The AS series consists of one-piece push-in tube fittings for pneumatic tubing with outside diameters of Φ3~Φ6 mm. Tube diameter codes 03/04/05/06 correspond to Φ3/Φ4/Φ5/Φ6 respectively. The series has two body sizes based on tube diameter: Φ3 and Φ4 use the smaller body (A=37.5 mm, K=12 mm, P=9.3 mm, E=5 mm, C=24 mm, J=6.7/3.3 mm, JC=11 mm), while Φ5 and Φ6 use the larger body (A=40 mm, K=13 mm, P=11.5 mm, E=6.2 mm, C=26 mm, J=8.5/8.8 mm, JC=9 mm). The catalog provides overall and mounting dimensions including A, K, P, E, C, J and JC, making it easier to route tubing and secure brackets in confined spaces such as labeling machines and packaging lines. The same family also includes self-locking tube fitting models with an A suffix for applications requiring quick locking to prevent tubing from coming loose.

MGW Miniature Wide Linear Guideway

MGW Miniature Wide Linear Guideway

The MGW series comprises miniature wide linear guideways with two block styles: standard (C) and raised (H). Guideway block widths range from 7 mm to 15 mm, making the series suitable for high-precision, high-rigidity linear motion in compact automation equipment, semiconductor equipment, medical instruments, and similar applications. These guideways offer low friction, low noise, and a long service life, and can withstand loads from multiple directions. Key dimensions include an assembly height of 6–16 mm, block width of 12–60 mm, and block length of 9.6–57 mm. The rated dynamic load ranges from 0.54 to 8.93 kN, and the rated static load from 0.84 to 13.38 kN.

AS Series Self-Locking Tube Fittings

AS Series Self-Locking Tube Fittings

The AS series of self-locking tube fittings includes AS-L self-locking, AS tube, AS labeling tube, and AS self-locking tube subseries. Designed for pneumatic piping systems, the self-locking fittings prevent tubes from coming loose. They accommodate tube outside diameters of Φ3~Φ6mm and thread sizes M3, M5, and M6. Model numbers comprise the series code, thread size, tube diameter code, and other identifiers. The quick-connect design makes installation easy, and the fittings are widely used in pneumatic control circuits for automated equipment.

SLA Series Square Tubing

SLA Series Square Tubing

SLA series square tubing is an air supply tube with a square cross-section for pneumatic systems, available in four tube outer diameters: Φ3, Φ4, Φ5 and Φ6. Its square profile provides a tidy layout and makes routing and securing easier. It is suitable for compressed air lines in factory automation equipment and pneumatic control circuits. Key dimensions include tube outer diameter D and mounting and body dimensions A, K, L, EA, EB, C, PA and PB. For Φ3/Φ4, A is 40mm, K is 12mm, EA is 5.2mm, EB is 24.3mm and C is 6mm. For Φ5/Φ6, A is 41.5mm, K is 13mm, EA is 7.5mm, EB is 36.5mm and C is 7.5mm. It can be combined with pneumatic fittings, flow control valves and other components to form a complete pneumatic piping system.

SLW Series Universal Flow Control Valve

SLW Series Universal Flow Control Valve

The SLW series universal flow control valve (universal speed control fitting) regulates the speed of pneumatic actuators such as cylinders. Its mounting and piping arrangement can be adjusted in multiple directions. The catalog covers tube outer diameters Φ3, Φ4 and Φ6 and port threads M3 and M5, and lists overall and mounting dimensions including R, K, L, EA, EB, C, PA and PB. This makes it easier to select a valve for flow control and directional adjustment in automated equipment pneumatic circuits. Select a model that matches the tube outer diameter and port thread, such as SLW3-M3, SLW4-M5 or SLW6-M5.

PKJZ Mini Pneumatic Piping Series

PKJZ Mini Pneumatic Piping Series

The PKJZ mini series consists of compact pneumatic piping components for air tubing with outside diameters of Φ3~Φ6 mm. Designed for connecting and routing air tubing, they are suitable for small automation equipment and pneumatic circuits where space is limited. The catalog lists four sizes by tube outside diameter: PKJZ-03C, PKJZ-04C, PKJZ-05C and PKJZ-06C. For each size, it specifies the outside diameter D, P, K, A (overall length), JC, JB, DC, ΦJ (bore diameter) and EA, allowing users to check connection dimensions, overall length and installation space when selecting a model. Φ3 and Φ4 share the same dimensions (A=48.5 mm, JC=30.5 mm, DC=9.3 mm, EA=15 mm), while Φ5 and Φ6 share another set (A=57 mm, JC=36.5 mm, DC=11.2 mm, EA=17.5 mm). The appropriate size can be quickly selected based on the tube outside diameter.

PVU Series Pneumatic Tube Fittings

PVU Series Pneumatic Tube Fittings

The PVU series consists of straight fittings for pneumatic lines, connecting pneumatic tubing with an outer diameter of Φ4~Φ12 to actuators or air supply circuits. Five models are available by tube outer diameter: PVU-4, PVU-6, PVU-8, PVU-10 and PVU-12, corresponding to Φ4, Φ6, Φ8, Φ10 and Φ12 tubing, respectively. The catalog lists overall dimensions PA (10.5~20mm), K (15~21mm), JA (18~28mm), JB (8.7~14mm) and ΦJ (uniformly 4.3mm). These dimensions increase linearly with tube diameter and can be used to check installation space and tubing clearance. The fittings are suitable for conventional industrial pneumatic systems; simply insert tubing of the corresponding diameter to install. Applications include automated equipment, fixtures and cylinder piping. When selecting a model, first determine the tube outer diameter, then check the PA/K/JA/JB dimensions to ensure adequate layout clearance.

Q Series Copper- and Zinc-Free Push-in Fittings

Q Series Copper- and Zinc-Free Push-in Fittings

Q Series copper- and zinc-free push-in pneumatic tube fittings are designed for pneumatic piping systems and allow tubing direction to be freely adjusted even after installation. The body is made of 304 stainless steel, is free of copper and zinc, and resists corrosion and contamination. All R and NPT threads are pre-coated with sealant, and all straight threads are supplied with standard O-rings. Suitable for air and vacuum, the fittings have an operating pressure range of 0~1.0MPa(150psi), a vacuum pressure of -100kPa(-29.5in-Hg), a proof pressure of 1.5MPa, and an operating temperature range of 0~60℃. They are compatible with PU and nylon tubing. A wide range of models and sizes is available, including the PAU, PRG, and PC series, for applications in renewable energy, food processing, chemical processing, and other industries.

PAU Series Mini Fittings

PAU Series Mini Fittings

PAU series mini fittings are copper- and zinc-free push-in pneumatic fittings. Their 304 stainless steel bodies offer good corrosion and contamination resistance, making them suitable for air and vacuum piping systems. The push-in design allows the tubing direction to be changed freely even after installation, simplifying piping. Technical specifications: working medium: air or vacuum; operating pressure range: 0~1.0MPa (150psi); vacuum pressure: -100kPa (-29.5 in-Hg); proof pressure: 1.5MPa; ambient and fluid temperature: 0~60℃ (32~140℉); compatible tubing: PU and nylon. Five sizes are available by tube outer diameter: Φ4, Φ6, Φ8, Φ10 and Φ12. Overall and installation dimensions include PA, K, JA, JB, ΦJ, ΦDC, ΦJC and ΦJD. The fittings are widely used in new energy, food, chemical and other industries.

PRG Series Mini Tube Fittings

PRG Series Mini Tube Fittings

PRG Series Mini Tube Fittings are compact push-in pneumatic fittings for air and vacuum piping systems. Their 304 stainless steel bodies resist corrosion and contamination, and the tube direction can be freely adjusted after insertion. The series is available for tube outside diameters of Φ4, Φ6, and Φ8, with the final number indicating the connection size. Common models include PRG4-4, PRG6-4, PRG8-4, PRG6-6, PRG8-6, and PRG8-8. Key dimensions include tube outside diameter D, d, PA1, PA2, EB, L1, L2, and J. The overall length EB is 34~41mm, and L1 is 11~15mm. The compact design is suitable for pneumatic piping where installation space is limited. These fittings are widely used in automated pneumatic systems in the new energy, food, and chemical industries.

JPC/JPOC Series Copper- and Zinc-Free Push-In Fittings

JPC/JPOC Series Copper- and Zinc-Free Push-In Fittings

JPC/JPOC series push-in fittings are made from copper- and zinc-free materials for pneumatic piping applications sensitive to copper and zinc ions. They are available with metric M5/M6, R, G and NPT threads and fit tubes with outside diameters of 4~16mm and 5/32~1/2 inches. JPC denotes the straight type, while JPOC denotes another configuration. Dimensions such as D, R, A, B, S1/S2 and X are provided for each model to facilitate selection and installation.

JPC/JPOC Series Copper- and Zinc-Free Push-in Fittings

JPC/JPOC Series Copper- and Zinc-Free Push-in Fittings

These copper- and zinc-free push-in fittings are designed for pneumatic systems sensitive to copper and zinc ion contamination, including semiconductor, lithium battery, photovoltaic and medical applications. The body and threaded sections are specially treated to prevent copper and zinc from leaching into the media. The push-in design automatically locks the tubing in place and allows quick connection and disconnection with one hand. The catalog covers two main types: JPC straight fittings and JPOC fittings. Tube outside diameters are 4, 6, 8, 10, 12, 14, and 16mm, and 5/32, 1/4, 5/16, 3/8, and 1/2 inch. Thread options include M5/M6 metric threads, R(PT)1/8~1/2 tapered pipe threads, G(BSPP)1/8~1/2 parallel threads, and NPT1/8~1/2 American tapered pipe threads. The tables provide installation dimensions including tube diameter D, thread R, threaded end length A, overall length B, widths across flats S1/S2 (or P/S), and insertion depth X to assist with selection and piping clearance checks. Suitable for compressed air lines.

STW Stainless Steel Miniature Linear Guide

STW Stainless Steel Miniature Linear Guide

The STW series stainless steel miniature linear guides are made of stainless steel and are suitable for clean environments and applications with stringent corrosion-resistance requirements. They are available in several sizes (STW3, STW5, STW7, STW9, and STW12), each with a standard C-type and an extended L-type slider. Their compact dimensions and rated dynamic and static load capacities accommodate light to medium loads, while the guides can withstand moments in multiple directions. They are suitable for automation equipment used in semiconductor manufacturing, medical applications, precision instruments, and more.

JPCF/JPMF Series Copper- and Zinc-Free Push-to-Connect Fittings

JPCF/JPMF Series Copper- and Zinc-Free Push-to-Connect Fittings

The JPCF/JPMF series comprises copper- and zinc-free push-to-connect pneumatic fittings for semiconductor, electronics, medical, food and other piping systems sensitive to copper and zinc ion contamination. JPCF is a male-threaded straight fitting, while JPMF is a male-threaded elbow/M-threaded fitting. Both use copper- and zinc-free materials to prevent secondary contamination of the medium. They fit tubing with outside diameters of 4, 6, 8, 10 and 12 mm, with thread sizes R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8 and G1/2. Overall and mounting dimensions such as A, B, S and X are provided to simplify selection and piping.

JPMF Series Copper- and Zinc-Free Push-in Fittings

JPMF Series Copper- and Zinc-Free Push-in Fittings

JPMF series push-in fittings are made from copper- and zinc-free materials for environments sensitive to these metals, including semiconductor, food and medical applications. These straight male-threaded fittings are available for tube diameters including 4mm, 6mm and 8mm, with G1/8, G1/4, G3/8 and G1/2 (BSPP) threads. Model numbers consist of a model designation (such as JPMF04) and a thread code (such as 01G). Compact and easy to install, they provide quick connections for nylon, polyurethane and other tubing. Refer to the individual specifications for operating pressure, temperature and other parameters.

JPL Series Copper- and Zinc-Free Push-to-Connect Fittings

JPL Series Copper- and Zinc-Free Push-to-Connect Fittings

The JPL/JPLL series consists of copper- and zinc-free push-to-connect pneumatic fittings for lithium battery, semiconductor, photovoltaic and other applications sensitive to copper and zinc ions where contamination must be avoided. Made from copper- and zinc-free materials, these fittings can be connected and disconnected without dismantling the piping. They provide a reliable seal and can be connected and disconnected repeatedly. Two configurations are available: JPL is a straight fitting with a male thread, while JPLL is a 90° elbow. Compatible tube outer diameters are 4, 6, 8, 10 and 12 mm. Thread options include M5 and M6 metric threads and four tapered pipe threads: R1/8, R1/4, R3/8 and R1/2, corresponding respectively to model suffixes 01/02/03/04. The catalog provides dimensions including D (tube diameter), R (thread size), A (thread length), B (overall length), C, S (width across flats) and X for checking installation space and potential interference.

JPLL Series Copper- and Zinc-Free Push-In Fittings

JPLL Series Copper- and Zinc-Free Push-In Fittings

JPLL series copper- and zinc-free push-in fittings are extended straight pneumatic fittings made from materials free of copper and zinc. They are designed for environments sensitive to copper and zinc ions, including semiconductor manufacturing, cleanrooms, food and pharmaceutical production, and electronics, helping prevent contamination from copper and zinc leaching. The fittings accommodate pneumatic tubing with outside diameters of 4, 6, 8, 10, and 12mm and are available with M5, M6, R1/8, R1/4, R3/8, and R1/2 threads. The external hex allows quick installation with a wrench (S across flats: 10~24mm). The catalog lists key dimensions including D (tube diameter), R (thread), A, B (overall length), C, S (across flats), and X to facilitate selection and piping layout. The fittings connect and disconnect easily, provide a reliable seal, and can be reused.

JPLE Series Copper- and Zinc-Free Push-to-Connect Fittings

JPLE Series Copper- and Zinc-Free Push-to-Connect Fittings

JPLE series copper- and zinc-free push-to-connect fittings provide quick connections for pneumatic tubing. Their bodies contain no copper or zinc, making them suitable for environments sensitive to copper and zinc leaching. The range includes JPLE (R thread), JPLE-G (G thread), and JPLE-N (NPT thread), and accommodates tube diameters of 4, 6, 8, 10, 12 mm and 5/32, 1/4, 5/16, 3/8, 1/2 in. JPLFxx-xx models correspond to different tube diameters and thread sizes. The table provides overall and installation dimensions, including D, R, A, B, C, S, and X, to aid product selection and piping design.