product — Page 55

Corrugated Conduit
Corrugated conduit is one of the cable protection products manufactured by Junhong TMY, which operates two modern factories in Dongguan and Jiangmen. Alongside cleanroom cable carriers, robot cable dress packs, and plastic cable carriers, it forms one of the company's main product lines. The conduit encloses and protects cables and pneumatic hoses in moving machinery, helping prevent cable wear, dust ingress, and liquid splashes under repeated bending. It is suitable for applications with stringent cleanliness or operating requirements, including semiconductors and 3C microelectronics, display panels and mobile electronics, photovoltaics and new energy, and medical and pharmaceutical equipment. The manufacturer's catalog describes its cleanroom cable carriers as being made from a composite of polymer PU and e-PTFE, with high cleanliness and self-cleaning properties, resistance to bending, fatigue, acids, alkalis and aging, low noise, high-speed operation, and antistatic properties. Specific parameters for the corrugated conduit series, including material, inner and outer diameter ranges, bend radius, operating temperature, and protection rating, are not listed on these pages; refer to the manufacturer's specification sheet.

JH Series Sheaths
JH series sheaths are openable protective covers for cables and moving components in machinery, made from 1.4 mm thick sheet material. They are available in three designs: standard sheaths (material code JH.05, inner widths of 40/62 mm and large 1P versions with inner widths of 82/108/140 mm), single-side opening sheaths (JH.07, inner widths of 31/41/62/80/108 mm), and full-side opening sheaths (JH.08, inner widths of 28/50 mm). For a given inner width, the total width can be increased using 1P/2P/3P stacked-panel configurations, with total widths ranging from 48~150 mm to suit different opening sizes and wrapping layer requirements. All sheaths in the series are 1.4 mm thick, with a flat profile and an openable slit. They can be snapped into place or wrapped around the component being protected. In addition to the standard sizes listed in the table, inner widths, total widths, and opening styles can be customized to drawings. They are widely used to protect cables and shield moving components such as linear modules, guide rails, and lead screws from dust and debris. To select a model, first determine the opening style (standard/single-side opening/full-side opening), then select the material code according to the inner width and P count.

TMY Cleanroom High-Flex Flat Cable Carrier
The TMY cleanroom high-flex flat cable carrier is made from polymer silicone and consists of flexible cables, network cables, signal cables, pneumatic tubing, and push-in connectors. Its modular design allows flexible assembly. Cleanroom-compatible and resistant to repeated bending and fatigue, it provides a connection solution for motion-control cable assemblies. The product is widely used in clean environments with stringent cleanliness requirements, including semiconductor and 3C microelectronics, display panels and mobile electronics, photovoltaics and new energy, and medical and pharmaceutical applications. Custom configurations are available using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing, and other components. Accessories are also available for installation and fastening, including clamp plates (2HL~6HL), support spines (R40/R70), spacers, filling adhesive, internally threaded screws, hex standoffs, and flat-head screws.

HL Series Clamp Plates
HL series clamp plates are accessories for cleanroom cable carriers with highly flexible flat cables and their support frame systems. They secure the support frame and cable routing assembly, ensuring stable positioning of the cable carrier during high-speed reciprocating motion. The series comes in five sizes: 2HL, 3HL, 4HL, 5HL and 6HL. The three key dimensions are A (overall length), R (arc radius) and C (height). C is 46mm for all models, while A ranges from 56.5~134.1mm and R from 47~124.1mm, increasing with each model size. Users can select a model based on the support frame radius (R40, R70) and available installation space. Each size has a unique material code (JH.06.2HL ~ JH.06.6HL) for convenient purchasing and inventory management. These plates are commonly used with support frames, spacer blocks, filling compound, internally threaded screws, hex studs, flat-head screws and other accessories. They are widely used on automated production lines with stringent cleanroom requirements, including semiconductor and 3C microelectronics, display panels, photovoltaics and new energy, medical devices and pharmaceuticals.

Support spine
The support spine is a curved support and guide accessory for cleanroom-compatible, highly flexible flat cable carrier and moving cable harness systems. It works with clamping plates, spacers, filler adhesive and fasteners to define the cable harness path. The catalog lists two standard radius options: R40mm and R70mm, with corresponding material codes JH.07.R40 and JH.07.R70. Selected by radius, this series is suitable for applications with stringent cleanliness requirements, including semiconductors and 3C microelectronics, display panels, photovoltaic and new energy, medical devices and pharmaceuticals. Custom assemblies can also be made using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing and other components.

Clamp Plates / Guide Ribs / Accessories
Clamp plates, guide ribs, and accessories are installation components for cleanroom-compatible, highly flexible flat cable carriers and cable management systems used in semiconductor, 3C microelectronics, display panel, photovoltaic and renewable energy, medical, and pharmaceutical applications. Clamp plates secure the cable carrier or cable bundle and are available in five sizes based on curved surface dimensions: 2HL, 3HL, 4HL, 5HL, and 6HL. A increases from 56.5mm to 134.1mm, R increases from 47mm to 124.1mm, and C is 46mm throughout, accommodating different bend radii and installation heights. Guide ribs provide curved guidance for the cable carrier and are available in R40mm and R70mm radii. Accessories include fasteners and fillers such as 4mm spacers, filling compound, 10-M4 internally threaded screws, 8-10-M4 hex studs, and M4-8 flat-head screws. The materials are suited to cleanroom requirements and resist bending and fatigue. Modular assemblies can be customized using customer-supplied flexible cables, network cables, signal cables, pneumatic tubing, and other components.

Extra-Heavy-Duty Reinforced Nylon Wheels
Extra-heavy-duty nylon casters are specially designed to support and secure heavy loads. Their exceptionally sturdy construction can withstand loads beyond their rated capacity. Typically made from high-strength nylon, these casters offer excellent wear and impact resistance. They are designed to support and move very heavy equipment, such as heavy machinery and industrial equipment, allowing smooth movement over a variety of uneven surfaces even under heavy loads. This series has a load capacity of 900–1,600 kg and a height of 152–252 mm. Made from PA, it features a mounting-hole spacing of 110 × 75 mm and wheel diameters of 4–8 inches. Three types are available: with brake (TPS6), fixed (TPR), and swivel (TPS).

22.40 Cleanroom Conduit
The 22.40 cleanroom conduit is a cable conduit designed for clean environments. It is made of TPU and comes in standard white or black, with custom colors available. It is intended for use at 30±5℃ and a relative humidity of 45±15, with operating acceleration not exceeding 3g. It has a service life of at least 15 million cycles and an 18-month warranty. Antistatic and flame-retardant versions are also available on request. Cable and hose fill must not exceed 70% of the conduit interior: the standard version holds up to 6 cables of Φ7~Φ8 plus 4 of Φ4~Φ6; the version with horizontal and vertical dividers holds up to 4 of Φ6~Φ7 plus 4 of Φ4~Φ5; and the version with a lightweight support frame holds up to 2 of Φ6~Φ7 plus 2 of Φ4~Φ5. For horizontal and vertical dividers, 12 sets per meter are recommended. The available bend radii are 60 (minimum) and 70 (recommended). The connector's external height is 38mm, the unsupported length is no more than 800, the applicable travel is no more than 1600, the installation height is 140~170, and the clearance height is 160~210. The product features a new patented design that resists tensile forces without coming apart. It locks at the fixed connectors on both ends and includes a cable comb to prevent cables

35.65 Cleanroom Cable Carrier
The 35.65 cleanroom cable carrier is made of TPU and designed to guide cables and pneumatic tubing in cleanrooms. Its internal volume is 2025 mm³, and a maximum fill of 70% is recommended. The standard version holds up to 8 cables of Φ8~Φ10 plus 6 of Φ6~Φ7. With integrated dividers, it holds up to 6 cables of Φ8~Φ8 plus 10 of Φ4~Φ6; 12~18 dividers per meter are recommended. The minimum bend radius is 70 mm, with 90 mm recommended. It supports travel lengths ≤1700 mm and unsupported lengths ≤850 mm, with an installation height of 155~190 mm and an interference height of 200~250 mm. The product is available in white, black, or custom colors, with options such as antistatic and flame-retardant customization. Service life is ≥20 million cycles, and the warranty is 18 months.

40.85 Cleanroom Cable Carrier
The 40.85/40.110 series cleanroom cable carriers are made of TPU and guide, separate, and protect cables and pneumatic hoses in cleanrooms. The 40.85 carrier has an internal volume of 3056mm³, and the 40.110 has 4000mm³; cable and hose fill must not exceed 70%. The standard 40.85 model can accommodate up to 4 cables or hoses of Φ10~Φ12 + 10 of Φ8~Φ9 + 8 of Φ6~Φ7. With an integrated divider, it can accommodate 4 of Φ10~Φ12 + 6 of Φ8~Φ9 + 6 of Φ6~Φ7; 12~18 dividers per meter are recommended. The minimum bend radius is 100mm, with 130mm recommended. Unsupported length is ≤900mm, and travel is ≤1800mm. Operating acceleration is ≤3g, operating temperature is 30±5℃, and operating relative humidity is 45±15%. Service life is ≥20 million cycles, with an 18-month warranty. Optional accessories include a cable comb (SZB), an integrated divider (FGP), horizontal and vertical separators, and a heavy-duty support spine JH.03.R70 (for unsupported lengths of 1000~1800mm) for extra-long

40.110 Cleanroom Cable Carrier
The 40.110 cleanroom cable carrier guides and protects cables and pneumatic tubing in cleanrooms and factory automation equipment. Its body is made of TPU and is available in white, black, and custom colors. The carrier has an internal volume of approximately 4000 mm³, with cable and tubing fill limited to 70%. It accommodates multiple Φ6~Φ12 cables or tubes, and 12~18 separators per meter are recommended to divide the internal space. The product supports acceleration of ≤3g, operates at 30±5℃ and 45±15% relative humidity, has a service life of ≥20 million cycles, and carries an 18-month warranty. Special versions, including antistatic and flame-retardant products, are available on request. The series includes 40.110C mounting brackets, 40.110.SZB comb plates, 40.110.FGP integrated separators, and the JH.03.R70 heavy-duty support frame system for long-travel or long unsupported applications. Example configuration: 40.110 R60 L1000 + 40.110C + (SZB) + (FGP).

Extra-Heavy-Duty Forged Steel Caster
The extra-heavy-duty forged steel caster series is made from premium materials that meet national standards, offering high strength and durability for reliable, long-term operation in harsh environments. Load capacities range from 500 to 1,000 kg, with wheel diameters of 4–8 inches and overall heights of 152–252 mm. Made from forged steel (SE), the casters have center-hole dimensions of 110 × 75 mm. Available in three configurations to suit different installation needs: with brake (TPS6), fixed (TPR), and swivel (TPS). The reinforced bracket connection combines strength with toughness, making these casters suitable for moving and positioning heavy machinery and industrial equipment.

FL Series Flanged Ball Screw Bearings
The FL series consists of integrated flanged ball screw bearings (combined bearing units) with a flanged outer ring for direct mounting on the fixed end of a ball screw or on a CNC machine tool spindle. The flange plate is secured directly with locking bolts, replacing a pair of universally matched single-row bearings and eliminating the need for a bearing housing, seals, bushings, end covers, and grease. No preload adjustment is required, simplifying installation, improving assembly accuracy, and reducing costs. These compact bearings support axial loads in both directions and offer low vibration, low noise, high rotational accuracy, low friction torque, excellent sealing, and strong suitability for high-speed operation. Basic dimensions cover bore diameters d of 15~35mm and outside diameters D of 35~72mm, with a preload of 60~80N·m on the two inner rings and a grease-lubricated limiting speed of 2500~5000r/min. Flange designs can also be customized to customer requirements.

760 Series Sealed Angular Contact Ball Bearings
The 760 series comprises sealed angular contact ball bearings for machine tool spindles. With a 60° contact angle and an increased number of steel balls, they provide greater axial rigidity and require less starting torque than tapered roller or thrust ball bearings, enabling high precision. Non-contact seals on both sides simplify the bearing sealing design of the host machine. The cage is a rolling-element-guided polyamide resin cage (Tn1). The series includes the 7602 and 7603 subseries, with bore diameters of 12~55mm, outside diameters of 32~110mm, and widths of 10~27mm. Basic dynamic load ratings are 11.6~69.5kN, and static load ratings are 12.5~127kN. Limiting speeds are 5000~17000 r/min with grease lubrication and 6700~24000 r/min with oil lubrication. Precision grade: P4.

TAC Series Thrust Angular Contact Ball Bearings
The TAC series consists of high-precision thrust angular contact ball bearings designed specifically for ball screws. Their boundary dimensions conform to the international BS standard. With a 60° contact angle, they accommodate combined loads that are predominantly axial and can be freely combined in multiple rows, including back-to-back arrangements such as DBB. The bearings feature a rolling-element-guided polyamide resin cage (TN1), while the 60° contact angle provides both high axial rigidity and high-speed capability. The basic series offers bore diameters of d=15~60mm, outside diameters of 47~120mm, widths of 15/20mm, basic dynamic load ratings of 21.9~67.5kN, static load ratings of 26.6~130kN, limiting speeds of 1800~6000r/min with grease and 2300~8000r/min with oil, and masses of 0.135~1.11kg. The sealed series features 2RSH high-speed seals and P4 precision. The seals prevent contaminants such as plastic, wood and metal chips and cutting fluid from entering the bearing, helping prevent the approximately 40% of premature screw bearing failures caused by contamination. Lifetime lubrication makes the bearings maintenance-free and eliminates the need for an oil lubrication system. Applications include machine tool screw support and precision transmission.

TAC Series Angular Contact Thrust Ball Bearings
TAC series angular contact thrust ball bearings, available in unsealed B type and sealed 2RSH/P4 designs, are high-precision bearings designed specifically for ball screw support. They have a 60° contact angle and a rolling-element-guided polyamide resin cage (TN1). Their boundary dimensions conform to the international BS standard, and they can be freely combined. Sealed versions feature lifetime grease lubrication and high-speed seals that prevent contaminants such as plastic, wood chips, metal chips, and cutting fluid from entering the bearing. Approximately 40% of premature machine tool screw bearing failures are caused by contaminant ingress; the seals effectively extend service life and enable maintenance-free operation without an oil lubrication system. Bore diameter: 15~60mm; outer diameter: 47~120mm; width: 15~20mm; dynamic load rating: 21.9~67.5kN; limiting speed with grease lubrication: 1800~6000 r/min.

H Series Ultra-High-Speed Motorized Spindle Bearings (Steel Balls)
The H series comprises ultra-high-speed angular contact ball bearings for grinding and engraving/milling motorized spindles. Their internal parameters are analytically optimized to minimize rolling element slippage at high speeds. They are suitable for grease, oil mist, oil-air, and oil jet lubrication. The range includes the H70, H72, and H719 series, with contact angles of C (15°) or AC (25°). Rolling elements are steel balls (unmarked) or ceramic balls (HQ1). Cages are outer-ring-guided phenolic resin cages (unmarked) or inner-ring-guided polyamide resin cages (TN1). The high-precision series is available only in P4 and P2 grades and can be preloaded at constant pressure for high-speed and ultra-high-speed operation. The range covers bore diameters of 15~90mm. The table lists parameters including d, D, B, minimum chamfer r, rated dynamic/static loads, limiting speeds for grease/oil lubrication, and reference mass.

B Series Spindle Bearings (Steel Balls)
B series spindle bearings with steel balls are high-speed, high-precision bearings primarily used in motorized spindles for grinding, engraving and milling. Their internal parameters are specially optimized for motorized spindle applications, with low temperature rise under grease lubrication. The range includes the B70 and B72 series, with a 15° contact angle. Cage options are an outer-ring-guided cage for static grease lubrication (no designation) and a ball-guided PEEK cage (no designation). Rolling elements are steel balls (no designation) or ceramic balls (HQ1). The high-precision series is available only in P4 and P2 grades. These bearings are suitable for high and ultra-high speeds with constant-pressure preload, and can be lubricated with grease, oil mist or oil-air systems. Main dimensions: bore diameter 10mm to 90mm, outside diameter 26mm to 160mm, width 8mm to 30mm. Basic dynamic load rating: 3.0kN to 131.3kN. Limiting speed with grease lubrication: 8000 to 80000 r/min.

APC Series Plastic Push-to-Connect Fittings
APC series plastic push-to-connect fittings (one-touch tube fittings) provide quick connections for PU and nylon tubing in pneumatic systems. The tubing direction can be freely adjusted even after installation. The fittings feature nickel-plated brass and polybutylene terephthalate (PBT) plastic bodies for resistance to corrosion and contamination. All R and NPT threads are pre-coated with sealant, while straight threads come standard with an O-ring seal. Suitable for air and vacuum, they have an operating pressure range of 0~1.0 MPa (150 psi), a vacuum pressure of -100 kPa, a proof pressure of 1.5 MPa, and an operating temperature range of 0~60℃. Tube sizes range from APC04~APC16, with M5, M6, R1/8, R1/4, R3/8, and R1/2 threaded connections, as well as G parallel thread versions.

APOC/APCF Series Plastic Push-in Fittings
The APOC/APCF series comprises engineering-plastic push-in pneumatic fittings for quick connection and disconnection of nylon and PU tubing to pneumatic components such as cylinders, solenoid valves, and air preparation units. APOC is a male straight fitting (including an internal hex male straight version), while APCF is a male socket fitting with two subseries: APCF-G (G parallel pipe thread) and APCF-N (NPT American tapered pipe thread). Tube sizes cover 4, 6, 8, 10, 12, 14, and 16 mm and 5/32, 1/4, 5/16, 3/8, and 1/2 inch; thread sizes include M5, M6, R1/8~R1/2, G1/8~G1/2, and NPT1/8~NPT1/2. The body is made from engineering plastics such as POM or nylon, with nitrile rubber (NBR) seals. The fittings are suitable for compressed air, vacuum, and some water or liquid lines, with an operating pressure of approximately 0~1.0 MPa and a temperature range of approximately -20~+60 ℃. The catalog lists outline and mounting dimensions for each model, including D (tube outside diameter), R (thread size), A, B, P, S, and X, to assist with selection and piping design.

APCF Series Plastic Push-in Fittings
APCF series plastic push-in fittings quickly connect pneumatic tubing to threaded ports. Their bodies are made of engineering plastics such as nylon or polyoxymethylene, with metal or plastic threads, and are suitable for media such as compressed air and water. They are available in three thread types: APCF (R tapered pipe thread/BSPT), APCF-G (G parallel pipe thread/BSPP), and APCF-N (NPT American tapered pipe thread). They accommodate tubing outside diameters of 4/6/8/10/12mm and 5/32, 1/4, 5/16, 3/8, and 1/2 inches. Key installation dimensions include A (threaded end length), B (overall length), S (width across flats), and X (tube insertion dimension). Both metric and imperial versions are available. Simply push the tubing into the fitting to seal and lock it in place. Easy to install and remove, these fittings are widely used for quick tubing connections in automation equipment, pneumatic components, and piping systems.

APMF Series Plastic Push-in Fittings
The APMF series consists of straight male-threaded plastic push-in fittings for quickly connecting and disconnecting nylon or PU tubing and female-threaded ports in compressed air lines. One end has a push-in collet for tubing with an outside diameter of 4, 6, 8, 10 or 12mm, with imperial sizes of 5/32" and 1/4". The other end has a straight male-threaded connection, available in three thread standards: R1/8~R1/2 (BSPT), G1/8~G1/2 (BSPP), and NPT1/8~NPT1/2, identified by no suffix, a G suffix, and an N suffix, respectively. For each tube diameter and thread size, the catalog lists dimensions including D (applicable tube outside diameter), R/G/NPT (connection thread), M (fitting body thread), A (width across flats), B1 (overall length), B2 (threaded section length), and S1/S2 (hex widths across flats), making it easier to select a fitting for the available installation space and line diameter. For the same tube diameter, the 01/02/03/04 codes correspond to different thread sizes. Check both the thread standard and tube diameter when selecting a model.

APL Series Plastic Push-to-Connect Fittings
The APL series consists of plastic male elbow push-to-connect fittings (90° fittings) for right-angle connections between tubing and female threaded ports in pneumatic systems. The fitting body is injection-molded from engineering plastic. The push-to-connect side locks the tubing in place upon insertion and releases it when the release ring is pressed, allowing efficient, tool-free assembly. The male threaded side screws directly into an actuator or valve manifold. Four tubing outside diameters are available: 4, 6, 8, and 10 mm. Thread options include M5 and M6 metric fine threads and four pipe thread codes, 01~04, to accommodate ports on miniature cylinders, solenoid valves, pneumatic grippers, and other devices. These fittings are widely used in pneumatic control circuits in automation equipment, packaging machinery, and electronics assembly lines. Select a model based on the tubing outside diameter and mating thread specification.

APLL/APLF Series Plastic Push-in Fittings
APLL/APLF series plastic push-in fittings quickly connect nylon and polyurethane tubing to threaded ports in pneumatic systems. Tubing can be inserted and removed without tools; simply press the release ring to disconnect it. The fittings are available in a range of tube diameters and thread sizes: metric tube diameters of 4, 6, 8, 10, and 12 mm, and imperial tube diameters of 5/32, 1/4, 5/16, 3/8, and 1/2. Thread types include M5 and M6 metric threads, R1/8~R1/2 tapered pipe threads, G1/8~G1/2 parallel threads (model suffix G), and NPT1/8~NPT1/2 American tapered pipe threads (model suffix N). The catalog lists D (tube diameter), R (thread), and A, B, C, S, and X overall and installation dimensions for each model, making it easy to check wrench clearance and tubing routing. The model code format is main model-tube diameter-thread specification, for example APLL06-01, APLF08-04G, and APLF1/4-02N.

APLF Series Plastic Push-in Fittings
The APLF series comprises straight male-threaded plastic push-in fittings, with a push-in tube connection at one end and an R, G or NPT male thread at the other. They can be screwed directly into threaded ports on cylinders, solenoid valves, air preparation units and other components. Supported tube outside diameters include metric Φ4, Φ6, Φ8, Φ10 and Φ12, and imperial 5/32″, 1/4″, 5/16″, 3/8″ and 1/2″. Each tube size corresponds to four thread sizes, 01~04 (R1/8~R1/2 and their G and NPT equivalents). The injection-molded engineering plastic body features a stainless steel retaining clip and rubber seal, allowing pneumatic tubing to be quickly connected, disconnected and reused without tools. The range comprises three subseries: APLF (R tapered pipe thread), APLF-G (G parallel pipe thread) and APLF-N (NPT American tapered pipe thread). They are widely used in automated production lines, packaging machinery, electronic equipment and pneumatic control circuits.

APB Series Plastic Push-in Fittings
APB series plastic push-in fittings enable quick connection and disconnection of tubing in pneumatic lines. They accommodate tube diameters of 4, 5/32, 6, 8, 10, 12, 14, and 16, with threaded ports ranging from M5 and M6 to R1/8~R1/2, G1/8~G1/2, and NPT1/8~NPT1/2. The range consists primarily of straight fittings. Model suffixes 01/02/03/04 generally correspond to different thread sizes; the G suffix denotes a G thread, and the N suffix denotes an NPT thread. The catalog provides overall and installation dimensions, including D, R, A, B, C, S, and X, to facilitate fitting selection and pneumatic line layout.

Gold Diamond Casters
The Gold Diamond series is a range of lightweight casters designed with a low center of gravity and spring cushioning. With load capacities of 30–250 kg, the casters feature brackets stamped in a single piece from 2–4 mm thick steel plate. The surfaces are powder-coated, galvanized, or chrome-plated for an attractive, durable finish. Wheel materials include PE, PA, PP, TPR, and TPE, offering wear resistance, quiet operation, corrosion resistance, and impact resistance. The wheels swivel smoothly and are suitable for a wide range of environments. Mounting options include threaded-stem and plate types, with swivel, fixed, and brake configurations available. These casters are suitable for hospitals, food-service settings, and other industries requiring quiet operation and clean environments. The series offers a range of load capacities, heights, center-hole diameters, and wheel sizes. Model codes begin with “02,” followed by the wheel size, material, and function suffix (CPS2 for braked, CPR for fixed, and CPS for swivel).

APD Series Plastic Push-to-Connect Fittings
APD series plastic push-to-connect fittings are straight pneumatic fittings for quickly connecting tubing to female or male threaded ports in pneumatic lines. The tubing locks and seals automatically when fully inserted; press the release ring to remove it. No tools are required, making assembly and maintenance easy. The fitting body is made of engineering plastic and accommodates PU or nylon tubing with an outer diameter of 4, 6, 8, or 10 mm. Thread options include M5 and M6 metric fine threads and R1/8, R1/4, R3/8, and R1/2 tapered pipe threads. Multiple thread sizes are available for each tube diameter to suit different flow rates and installation spaces. The catalog lists D (tube outer diameter), R (thread size), and A, B, C, S, and X dimensions for each model. B is the overall length, S is the width across flats, and X is the outer diameter of the insertion end, making it easy to plan tubing layouts and check clearances.

APX Series Plastic Push-to-Connect Fittings
APX series plastic push-to-connect fittings are straight fittings for pneumatic lines, compatible with plastic air tubing with outside diameters of 4, 6, 8, 10, and 12 mm or 5/32, 1/4, 5/16, 3/8, and 1/2 inches. The series comprises three subseries by thread type: APX (M5, M6, R1/8~R1/2), APX-G (G1/8~G1/2), and APX-N (NPT1/8~NPT1/2). Model numbers indicate both tube diameter and thread specification. The catalog provides D, R, A, B, S, X, and other overall and mounting dimensions to aid product selection and tubing layout. Push-to-connect installation simplifies pneumatic circuit assembly and maintenance. These fittings are widely used in automated equipment, pneumatic fixtures, packaging machinery, and general industrial pneumatic systems.

APH Series Plastic Push-to-Connect Fittings
APH series plastic push-to-connect fittings (one-touch pneumatic fittings) provide quick, tool-free connection and disconnection between pneumatic tubing and threaded ports. They are widely used in pneumatic control systems and automated equipment. The engineering plastic body is lightweight and corrosion-resistant. Thread options include M metric, R/Rc tapered sealing, G parallel pipe, and NPT American tapered threads, compatible with ΦD 4/6/8/10/12mm tubing. The catalog provides complete external dimensions, including ΦD tube diameter, R thread specification, L1~L4 lengths, ΦD1 diameter, and S width across flats, to simplify selection and installation. Model numbers begin with APH, followed by tube diameter and thread specification codes. The G suffix denotes a G parallel pipe thread.

APHF Series Plastic Push-in Fittings
APHF series plastic push-in fittings are made of high-quality engineering plastic and are corrosion-resistant, lightweight, and easy to install. They provide quick connections between tubing and threaded ports in pneumatic systems and are widely used in automation equipment, pneumatic tools, packaging machinery, and other applications. The series is available for multiple tube outer diameters (Φ4, Φ6, Φ8, Φ10, Φ12 and imperial sizes 5/32, 3/16, 1/4, 5/16, 3/8, 1/2) and thread types (M5, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, G1/2, NPT1/8, NPT1/4, NPT3/8, NPT1/2) to meet different pneumatic circuit connection requirements. The fittings have a compact design and reliable seals, with a typical operating pressure range of 0~1.0 MPa and an operating temperature range of 0~60℃.

APHT Series Plastic Push-in Fittings
The plastic push-in fitting range includes APHT, APHT-G, APKB, APKB-G, APKD and APKD-G types for quick connection and branching of nylon and polyurethane tubing in pneumatic systems. APHT push-in straight and branch fittings have PT(R) or G threads and accommodate ΦD 4/6/8/10/12mm air tubing. Thread sizes range from PT1/8~PT1/2 and G1/8~G1/2. The table lists L1~L6 lengths, ΦD1 outside diameter and S hex across-flats dimensions. APKB/APKD series fittings are cartridge-type push-in fittings, with installation dimensions including L, A, B, C, ΦD, Φd, H, G/R threads and X1/X2. Made from engineering plastic, the fittings are easy to install and remove without tools and are suitable for pneumatic lines in automated equipment.

APHT-G Series Plastic Push-in Fittings
The APHT-G series consists of straight male-threaded plastic push-in fittings commonly used for quick connections in pneumatic systems. One end accepts nylon or PU tubing of the corresponding outside diameter for quick, tool-free installation and removal. The other end has a G-series (BSPP parallel) male thread for connection to a threaded port. The series accommodates five tube outside diameters, ΦD 4, 6, 8, 10 and 12 mm, and four port thread sizes, G1/8, G1/4, G3/8 and G1/2. Key dimensions include tube outside diameter ΦD, port thread G, lengths L1~L6, fitting diameter ΦD1 and width across flats S. Models follow the naming format APHT+tube diameter code-port number(3)G. For example, APHT06-02(3)G denotes a Φ6 tube and a G1/4 port. These fittings are similar in appearance to the related APHT series (PT/R tapered threads), but differ in thread type. They are suitable for connecting tubing to pneumatic actuators, cylinders and solenoid valves.

APKB Series Plastic Push-to-Connect Fittings
APKB series plastic push-to-connect fittings are available in two variants: APKB with R threads and APKB-G with G threads. They provide quick tubing connections in pneumatic systems. Made from high-quality plastic, they offer easy installation, reliable sealing, and corrosion resistance. Compatible tube outside diameters ΦD are 4, 6, and 8 mm, with thread sizes including R1/8, R1/4, R3/8, G1/8, and G1/4. The typical operating pressure is 0~1.0 MPa and the operating temperature is 0~60°C. They are widely used in automation equipment, pneumatic control cabinets, and other applications.

APKB-G Series Plastic Push-In Fittings
The APKB-G series consists of plastic push-in fittings for pneumatic lines. They feature an engineering plastic body and a metal threaded section. Tubing locks in place when inserted and can be removed by pressing the release ring. The fittings provide quick connections and branches for air lines, including vacuum lines. Available sizes accommodate tubing outer diameters ΦD of 4, 6, 8, 10 and 12 mm. Threaded ends are available with G (BSPP parallel pipe thread) or R/PT (tapered pipe thread). Within the same family, APKB models have R threads and APKB-G models have G threads; other configurations include APHT and APKD. Selection parameters in the catalog include ΦD (tube diameter), Φd (bore diameter), G/R thread size and dimensions L, A, B, C, H, X1 and X2. Select the part number using the combination of tubing outer diameter and thread size. To install, insert the tubing fully and screw the threaded end into the matching female port. These fittings are suitable for quick pneumatic piping in automated equipment, fixtures and packaging machinery.

HG Series
The HG Series precision linear guideway is a high-precision, high-rigidity linear motion guide widely used in automation machinery, material handling equipment, machine tools, and other applications. It is available with preload classes Z0 (light preload), ZA (medium preload), and ZB (heavy preload), and accuracy classes C (normal), H (high), P (precision), SP (super precision), and UP (ultra precision). Carriage styles include flange type (W), square type (H), and low-profile square type (L), in sizes 15 to 65. Load types include heavy load (C) and super-heavy load (H). Dust protection options include self-lubricating (E2) and metal end caps (SE). Carriage mounting options are top-mounted (A), bottom-mounted (B), and top- and bottom-mounted (C). The guide rail is available with top mounting (R) or bottom mounting (T). The product is interchangeable and can be installed in place of guideways from international brands.

APKD Series Plastic Push-to-Connect Fittings
APKD series plastic push-to-connect fittings provide quick connections for pneumatic tubing. Their bodies are made of engineering plastic (PBT or nylon) and fitted with slotted stainless steel or brass sleeves, allowing PU and PA tubing to be quickly connected and disconnected. They accommodate tube outer diameters of Φ4, Φ6, Φ8, and Φ10 mm and thread sizes G1/8, G1/4, G3/8, and G1/2 (codes 01~04). Reducing versions are also available (such as Φ6-Φ4, Φ8-Φ6, and Φ10-Φ8). Operating pressure is 0~1.0 MPa, vacuum pressure is -100 kPa, operating temperature is 0~60°C, and the working medium is compressed air. Easy to install, reliably sealed, and reusable, these fittings are widely used for tubing connections in automated equipment, pneumatic control cabinets, and industrial robot end effectors.

APKD-G Series Plastic Push-In Fittings
The APKD-G series consists of plastic push-in fittings with G threaded connections for quick connection and disconnection of tubing in pneumatic lines. Models accommodate tube diameters including ΦD 6/8/10 mm, with thread sizes G1/8 and G1/4. Dimensions include L, A, B, C, ΦD, Φd, H, X1 and X2. Easy to install, these fittings are suitable for automation equipment, pneumatic control systems and general industrial piping. See the individual model tables for dimensions, and confirm the tube diameter, thread size and available installation space when selecting a model.

APU/APV/APE Series Plastic Push-to-Connect Fittings
This series of plastic push-to-connect fittings includes APU, APV and APE configurations for quickly connecting and disconnecting nylon, polyurethane and other pneumatic tubing. The range accommodates metric and imperial tube diameters, with metric sizes from 4 mm to 16 mm and imperial sizes including 5/32, 1/4, 5/16, 3/8 and 1/2 inches. The catalog provides overall and installation dimensions such as D, A/E, d and X to assist with selection and piping design. The push-to-connect design is easy to install and allows repeated connection and disconnection. These fittings are suitable for tubing connections in automation equipment, pneumatic control circuits and various pneumatic actuators.

APY Series Plastic Push-to-Connect Fittings
APY series plastic push-to-connect fittings allow hoses in compressed air lines to be connected and disconnected quickly. They lock on insertion and are easy to remove. The catalog lists 7 sizes from APY04~APY16 for tube diameters D=4~16 mm, along with dimensions A, d and X to help with selection and installation space checks. The fittings have plastic bodies and are suitable for automation equipment, pneumatic control systems and general industrial air lines.

APK Series Plastic Push-in Fittings
APK series plastic push-in fittings provide quick connections between tubing and components in pneumatic systems. Their engineering plastic bodies and O-ring seals allow tool-free connection and disconnection with reliable sealing. The series includes metric straight APK fittings, imperial straight APKG fittings, and variants such as APP and APPG(APPK). They accommodate tubing outside diameters of 4, 6, 8, 10, and 12 mm, as well as 5/32, 1/4, 5/16, 3/8, and 1/2 inch. Key dimensions include tube outside diameter D, body length B, bore diameter d, and mounting dimensions F, E, and X, which increase with fitting size. These fittings are widely used to connect tubing in automation equipment, pneumatic actuators, sensor air lines, and other applications.

APKG Series Plastic Push-in Fittings
Plastic push-in fittings allow quick connection and disconnection of nylon and polyurethane tubing in pneumatic systems. The tube locks in place when inserted and can be removed by pressing the release ring, with no tools required. They are widely used in automation equipment, pneumatic fixtures, packaging machinery, and electronics assembly lines. This series is available in both metric and imperial (inch) sizes: APY is a straight type for tube outside diameters of 4–16mm; APK is an extended straight type for 4–12mm; APP is a branch type for 4–12mm; and APKG and APPG are imperial series covering 5/32–1/2 inches. Key dimensions include tube outside diameter D, overall length B, bore diameter d, mounting/thread dimensions F and E, and insertion positioning dimension X. The body is made of engineering plastic, the seals are nitrile rubber, and the fittings are suitable for compressed air.

APP Series Plastic Push-in Fittings
APP series plastic push-in fittings are nylon fittings for quickly connecting and disconnecting tubing to threaded ports or other tubing in pneumatic systems. The products are available in metric and imperial tube sizes: metric models use APP followed by the tube diameter, with sizes of 4, 6, 8, 10, and 12 mm; imperial models use APPK followed by the fractional inch size, with sizes of 5/32, 1/4, 5/16, 3/8, and 1/2 inch. The catalog lists external and installation dimensions for each size using D (compatible tube outside diameter), B (overall length), d (through-hole/bore), F, E, X, and other dimensions, making it easier to check insertion depth and installation space when selecting a fitting. The plastic fitting body uses a push-in locking mechanism that requires no tools for assembly: the air tube is inserted directly and held by a self-locking collet to provide a seal. These fittings are widely used in compressed-air circuits in automation equipment, packaging machinery, and electronics assembly lines. The same catalog page also lists plastic push-in fittings in different configurations, such as APY, APK, and APKG (straight, elbow, tee, and others). Select the specific model by combining the configuration code with the tube diameter.

AP Series Plastic Push-in Fittings
Plastic push-in fittings provide quick connections for compressed air lines. Their one-touch design seals and locks the tubing upon insertion; pressing the release ring allows it to be removed without tools. The range includes APY straight, APK elbow, APKG imperial elbow, APP branch/T, and APPG imperial branch fittings. Metric sizes cover tube diameters D4~D16, while imperial sizes range from 5/32″~1/2″. The fitting bodies are made of engineering plastic (nylon/POM), and internal O-rings ensure an airtight seal. Key specifications include tube diameter D, external dimensions A/B/E/F/X, and bore diameter d. They are suitable for automation equipment, pneumatic control systems, and similar applications.

APGJ Series Plastic Push-in Fittings
Plastic push-in fittings are basic components used for quick connection and disconnection of tubing in pneumatic systems. Their bodies are made of engineering plastic, commonly in a composite construction of nylon and nickel-plated brass. Tubing can be inserted and removed without tools, while built-in resilient gripping claws and O-ring seals ensure airtight connections. The series includes APGJ straight and reducing fittings and APLM and APLN straight threaded fittings. APGJ models use the code “APGJ-size-tube diameter” and accommodate tube diameters of 4~20mm, with larger sizes extending to 356. Dimensions specified include the ΦD1 bore, overall length, B, C1, C2 and X. APLM/APLN are straight fittings with male threads (M12~M27), with dimensions L, A, B, C, ΦD, Φd, M, H and X specified. They connect Φ4~Φ16 pneumatic tubing to M12~M27 threaded ports. These products are widely used in automation equipment, pneumatic actuators, and vacuum and compressed air piping systems.

APLM Series Plastic Push-in Fittings
APLM series plastic push-in fittings are straight pneumatic fittings designed for quick connection and disconnection of nylon or polyurethane tubing to pneumatic components with female threads. The injection-molded engineering plastic body contains a stainless steel retaining clip and a rubber seal. The tubing locks and seals automatically upon insertion, allowing tool-free installation and removal for applications requiring frequent tubing changes. The range covers six tube diameters: Φ4, Φ6, Φ8, Φ10, Φ12 and Φ16, with corresponding male threads M12, M14, M16, M20, M22 and M27. Hex widths across flats range from 14~29mm, overall lengths from 33.3~62.6mm, and insertion depths X from 9.9~23.9mm. The same catalog also includes related fittings such as APLN (with a different thread type) and APGJ, whose body dimensions are essentially the same as those of this series. Select fittings according to thread type and tube size.

KAG Steel-Plate Locking
The KAG steel-plate locking nut series is a high-precision locking nut featuring a steel-plate locking structure. It is suitable for thread locking, bearing fixation, and similar applications. Specifications range from M10×0.75 to M100×2.0, with a variety of thread sizes available. Each model has defined dimensional parameters, including outer diameter (D), inner diameter (d), width (B), thickness (t), groove width (g), key height (h), and overall height (H). Weights range from 0.007 kg to 0.855 kg. These nuts provide strong locking force, high precision, and excellent reliability, and are widely used in precision machinery, automation equipment, and other fields. Non-standard specifications can be customized.

HGR-T Bottom-Mounted Linear Guide Rail Series
The HGR-T series features bottom-mounted rails in the HG series, designed for heavy-duty linear motion applications. The rails use a bottom-locking design and are available in a range of widths from 15 mm to 65 mm, compatible with standard blocks. They offer high rigidity and precision, along with excellent interchangeability. Rail dimensions include width, height, bolt specifications, and pitch to meet varying load and space requirements. The series is typically used with HG series blocks, such as the HGH flange type and HGL square type, and is widely used in automation equipment, machine tools, semiconductor equipment, and more.