product — Page 71

DJT Series Braided Reinforced Tubing
DJT series braided reinforced tubing is a flexible protective sleeve with a reinforced braided outer layer, designed primarily to protect pneumatic lines, hydraulic lines and cables. It is abrasion-resistant, compression-resistant, explosion-proof and antistatic. Its flexibility and small bend radius make it suitable for routing in confined spaces in factory automation equipment. Models are designated DJT-size×inner diameter and are available in a range of specifications, with inner diameters from 4mm to 8mm and various lengths to suit equipment travel and installation space. This standard industrial accessory protects air, water and other fluid lines.

CR Series
This series includes strain-relief components such as C-channels, cable clamps and cable tie plates, which secure and protect cables in cable carriers. The C-channel serves as a mounting channel for cable clamps or cable tie plates. It can be integrated into an MFB connector or used separately, and is available in galvanized steel or stainless steel. Custom lengths are available with a tolerance of ±1 mm. Cable clamps are available in single-, double- and triple-layer versions for different cable diameters (6–42 mm), and can secure one to three cables at a time. Cable tie plates accommodate single- or double-row cable ties and can be mounted independently or attached to a C-channel. All components are suitable for indoor and outdoor use and are dustproof, dirt-resistant and resistant to chemicals.

SJPS Double-Braided PU Hose
The SJPS double-braided PU hose is designed for spraying and solvent applications. It features a polyurethane (PU) inner tube reinforced with a double braid of polyester yarn, combining PU flexibility with the braid's resistance to pressure, abrasion and bursting. It is primarily used with spraying equipment, solvent transfer lines and pneumatic systems subject to high pulsating pressures. The reinforcement helps limit hose expansion and extend service life. The catalog ordering code for this series has five parts: model (SJPS), braid type (B), outer diameter, inner diameter and length (m). For example, SJPS-B-08-50-100m specifies an 8mm outer diameter, a 5.0mm inner diameter and 100 meters per roll. Common outer diameters are 8, 12 and 16mm, with rolls typically available in 50m and 100m lengths. Select the inner and outer diameters to suit the working pressure, burst pressure, medium (solvent/paint/compressed air) and hose fitting size. Working and burst pressures decrease as the outer diameter increases; refer to the applicable polyurethane tubing and polyester air hose specification tables for exact values.

PE Series High-Pressure Burst-Resistant Spray (Solvent) Hose
The PE series high-pressure burst-resistant spray (solvent) hose is a dedicated fluid transfer hose for TWSNS pneumatic systems. It features a PE (polyethylene) outer coating and a 2C inner coating, and is available in two main configurations: high-pressure burst-resistant spray (solvent) hose and twin-line braided PU hose. It is suitable for conveying solvents, paint and compressed air in spray equipment. Products are selected using the ordering code format “model + oil hose/braided hose + outer diameter + inner diameter + length.” A common specification is outer diameter 08 (8mm) and inner diameter 5.0 (5mm), supplied in standard 100m rolls. The hose is flexible, pressure-resistant and resistant to solvent corrosion. The braided layer improves burst pressure resistance and dimensional stability, making it suitable for long hose runs on automated spray lines. The catalog lists both working and burst pressures to help verify system pressure margins during selection. Colors and packaging can be specified as needed.

PE Series Polyethylene Oil Tubing
The PE series polyethylene oil tubing from SNS Automation (Ningye) Group is designed for high-pressure, burst-resistant spraying and solvent applications. Its two-layer composite construction combines a PE (polyethylene) outer coating with a 2C inner coating to withstand spraying solvents and high-pressure conditions. It is suitable for pneumatic piping systems used in spray painting, coating and solvent transfer. Products are selected using the order code format “model-oil tubing-outer diameter-inner diameter-length”. The standard outer diameter is 08, paired with an inner diameter of 5.0, and the standard roll length is 100m, with other lengths such as 50m also available. Confirm both the working pressure and burst pressure ratings when selecting tubing to ensure an adequate safety margin in high-pressure spraying environments. The tubing is flexible and chemically resistant, with a smooth inner surface that minimizes flow resistance. It is supplied in full rolls and can be cut to length, making it suitable for automated spraying lines, coating equipment and solvent transfer circuits.

FJLD Series Antistatic Oil Hose
The FJLD series antistatic oil hose (antistatic Teflon hose) has a two-layer composite construction, with a polytetrafluoroethylene (Teflon/PTFE) inner layer and a polyethylene outer layer. The Teflon inner layer resists corrosion, acids, alkalis, high temperatures and static electricity. It also provides strong electrical insulation, has a smooth inner surface and does not adhere to chemical solvents. The hose is suitable for spraying, dispensing, chemical solvent transfer and automated pneumatic or fluid lines where static sensitivity is a concern. The model number consists of the series code FJLD, construction code (such as 2C), outer diameter, inner diameter and fixed length (such as a 100m roll). Select fittings to match the outer and inner diameters, and cut the hose to the required length or order a full roll. Working pressure varies with size and temperature. Use at room temperature; refer to the product label or manufacturer for confirmed values.

FJLD Series Antistatic Spray Hose
The FJLD series is an antistatic spray hose with a polytetrafluoroethylene (PTFE, commonly known as Teflon) inner layer and a polyethylene outer layer. It offers resistance to corrosion, acids, alkalis and high temperatures, as well as antistatic properties and excellent electrical insulation. Its smooth inner wall resists chemical solvent adhesion, making it suitable for conveying and spraying coatings, solvents and various chemical solutions. Sizes are specified by outer and inner diameter pairs (the catalog example is outer diameter 08 and inner diameter 5.0). The standard supply length is 100m per roll. Models can be selected using a combined outer diameter, inner diameter and length code.

Nylon Tubing
This nylon tubing series is made from a polyamide 12 and polyurethane composite. The inner and outer walls are specially treated for a smooth, powder-repellent surface that resists wear and aging. The tubing can be used continuously at -40~+80℃, with an approximate working pressure of 12kgf/cm² and burst pressure of 35kg at room temperature. The catalog lists 10 sizes with outer diameters of 4~12mm and wall thicknesses of 0.75~1.5mm. Working pressures range from 18~36kgf/cm² and burst pressures from 40~120kgf/cm²; larger diameters have lower pressure ratings, while smaller diameters have higher ratings. The tubing is naturally white and packaged in transparent plastic film. The 12/10mm outer diameter sizes are supplied in 100-meter rolls, while the 8/6/5/4mm sizes are available in 100-meter or 120-meter rolls. Applications include powder transport for electrostatic coating, conveyance of mildly acidic chemicals, and industrial water transport. Non-standard sizes are available on request.

Electrostatic Powder Coating Hose (Nylon Tubing)
Hose and nylon tubing for electrostatic powder coating, used to convey coating powder, weakly acidic chemical liquids, and industrial water. The hose is made from imported high-elasticity polyolefin rubber and is flexible, lightweight, cold-resistant, and resistant to aging. Its inner and outer surfaces are abrasive-treated for wear resistance and to prevent powder buildup. Two black conductive plastic tubes embedded in the hose wall dissipate static electricity generated during powder transport, ensuring normal equipment operation. The nylon tubing is made from polyamide 12 and polyurethane and operates at -40~+80℃. Common sizes have an outer diameter of 4~12mm and a wall thickness of 0.75~1.5mm. Working pressure is 18~36 and burst pressure is 40~120 (values as given in the original). Standard package lengths are 100m or 100/120m. The tubing is natural white and packaged in transparent plastic film. Non-standard sizes can be custom-made.

Flame-Retardant Pneumatic Tubing (Spark-Resistant Tubing)
Flame-retardant pneumatic tubing (spark-resistant tubing) has a two-layer construction with a highly elastic TPU inner layer and a thermoplastic rubber outer layer. It combines flexibility, pressure resistance, flex resistance and flame retardancy, making it suitable for spark-generating applications or those requiring spark protection, including electrical discharge machines, cutting machines, laser cutting, robotic welding and gas transfer. The inner layer protects the air line, while the outer layer resists aging and enhances flame retardancy. Hardness is approximately 95A, operating temperature is -25~+80℃, thermoplastic rubber service temperature is 0~120℃, working pressure is 8KG, flame-retardant rating is Class 1, and environmental rating is V0. Confirm specifications such as outer diameter, inner diameter and length when selecting a product. Non-standard sizes can be customized on request.

XDH/XCL Series Plastic Air Blow Guns
The XDH/XCL series air blow guns feature plastic bodies and an ergonomic design for a comfortable grip, easy operation and economical performance. The barrel has a highly corrosion-resistant protective sleeve that helps prevent metal corrosion and scratches to workpieces. The barrel itself is made of hard anodized aluminum tubing for strength and durability. The working medium is filtered compressed air, with a working temperature of -10~50℃ and a working pressure of 0~10.0 kgf/cm². The body is made of plastic. Standard models include XDH-1 and XCH-1, with options for A and L dimensions, connection, material and accessories. Custom barrel lengths are available. Suitable for compressed-air applications such as removing dust and debris from equipment and drying. Do not point the gun at anyone's eyes or operate it in high-pressure environments.

AC Series Hydraulic Shock Absorbers
AC series hydraulic shock absorbers are automation components that use hydraulic throttling to absorb impact kinetic energy and bring machinery to a smooth stop at the end of its travel. They are widely used for end-of-travel cushioning in cylinders, slides, conveyor lines, and robotic arms. Models are classified by bore and stroke combinations (such as AC2540, AC4250, and AC46050), with strokes of 25~150mm, maximum energy absorption per cycle of 115~4200Nm, and energy absorption per hour of 75000~260000Nm. Each model is available in three impact-speed versions: -1 high speed, -2 medium speed, and -3 low speed, with maximum impact speeds of 3/2/1m/s, respectively. The maximum effective weight is specified for each speed range (for example, AC2540: 300kg at high speed, 900kg at medium speed, and 1400kg at low speed). Both energy and effective weight must be checked when selecting a model. Mounting thread sizes range from 1/2"-1", allowing direct compatibility with various mechanical interfaces.

HXSD-MINI Small Cable Carrier Series
The HXSD-MINI series of small plastic cable carriers comes in a wide range of styles and sizes, with ample stock on hand to ensure short lead times. The extensive selection includes multiple opening styles—non-opening, inner-opening, semi-enclosed, and bridge-type—to suit different solutions and applications. Testing has confirmed a service life of over 15 million cycles. The connectors support four mounting options: T1, T2, T3, and T4. T1 is the default.

AD Series Shock Absorbers
AD Series shock absorbers are industrial hydraulic shock absorbers designed to absorb impact energy from moving mechanisms and reduce vibration and noise. The catalog provides a complete model list organized by stroke and cylinder bore, with specifications covering strokes of 16~50 mm, maximum energy absorption per cycle of 35~250 Nm, energy absorption per hour of 39000~95000 Nm/h, and maximum effective weights of 220~720 kg. The series includes standard and low-speed versions (model suffix -5). Some models have a -C suffix (such as AD2016-C and AD2540-C) and have slightly different energy absorption ratings from standard models with the same stroke. S Series non-adjustable models (see the corresponding page for specifications and dimensions) and A Series adjustable models are also available. Select the stroke and energy absorption capacity based on the moving component's impact speed, total weight, and number of cycles per hour, ensuring that neither the per-cycle nor hourly energy absorption rating is exceeded. These shock absorbers are widely used for end-of-stroke cushioning and controlled deceleration during positioning on pneumatic slides, conveyor lines, and automated assembly equipment.

ACS Series Non-Adjustable Shock Absorbers
The ACS series non-adjustable shock absorbers, formerly the AC-S series, absorb impact energy and reduce noise and vibration. They can replace the SMC RB series. Models include ACQ6040H(L), ACQ8050, and ACQ1200H(L), with mounting threads of M6×0.75, M8×1.0, and M14×1.5. Stroke lengths range from 4~320 mm (10~320 mm in 5 mm increments for ACQ1200H(L)). Maximum energy absorption ranges from 0.5~2.0 J, maximum operating frequency is 80 cycles/min, and maximum effective weight ranges from 0.05~1.5 kg. The non-adjustable design requires no adjustment and is suitable for automated equipment, conveyor lines, cylinder end stops, and other applications requiring impact absorption.

S Series Non-Adjustable Shock Absorbers
The S series of non-adjustable shock absorbers includes the ACS subseries (formerly AC-S) and can replace the SMC RB series. The fixed-orifice design provides consistent impact energy absorption for end-of-travel cushioning in automated mechanisms such as cylinders and slide tables. Catalog models include ACQ6040H(L), ACQ8050, and ACQ1200H(L), with mounting threads of M6×0.75, M8×1.0, and M14×1.5. Stroke lengths include 4 mm, 5 mm, and 10~320 mm for ACQ1200H(L) (in 5 mm increments). Maximum energy absorption is 0.5~2.0 J, maximum operating frequency is 80 cycles/min, and maximum effective weight is 0.05~1.5 kg. Select a model based on impact speed, load mass, and available mounting space.

S Series Non-Adjustable Shock Absorbers
S Series (ADFL Series) non-adjustable shock absorbers are self-compensating hydraulic shock absorbers that require no adjustment. They absorb shock and reduce noise at the end of travel of high-speed moving components such as cylinders, slides, and conveyor lines, providing consistent shock absorption without manual adjustment. The model number consists of ADFL + a two-digit mounting thread code + a two-digit stroke code. For example, ADFL1210 denotes an M12×1.0 thread and a 10mm stroke. Available specifications cover six mounting threads: M8×0.75, M10×1.0, M12×1.0, M14×1.5, M16×1.5, and M20×1.5, with strokes of 6~16mm. Each size is available in three impact-speed ratings: M (medium speed), H (high speed), and L (low speed), with corresponding maximum energy absorption (Nm) and maximum effective weight (kg) values. When selecting a model, check all three criteria: energy absorption, effective weight, and impact speed. The compact, maintenance-free body is threaded for mounting and supplied with a lock nut.

Shaft Collars
Shaft collars, also known as stop collars or limit rings, position and restrain components axially on a shaft. The collar fits over the shaft and is secured with a side set screw or a split-clamp mechanism, preventing bearings, sprockets, pulleys, gears and other components from moving along the shaft. The mounting flange style shown here adds a flange face and mounting holes to the collar, allowing it to be bolted directly to a frame, panel or slide table for easy attachment of stops, sensor brackets, limit switch actuators and other accessories. Common materials include carbon steel with a black oxide or zinc-plated finish, stainless steel and aluminum alloy. Sizes are based on the compatible shaft diameter; when selecting a collar, check the shaft diameter, flange dimensions and mounting hole spacing.

Mounting Flanges
Mounting flanges are accessories for locating nuts (stop rings and shaft collars). They use screws to secure the locating nut axially to a panel, frame, or equipment end face, providing axial positioning, preventing rotation, and ensuring flush mounting. Common materials include carbon steel with a black oxide or zinc-plated finish and stainless steel. Designs include single-slot, double-slot, and raised-boss types, with mounting holes typically countersunk or threaded. When selecting a flange, match it to the bore diameter, outside diameter, and width of the corresponding locating nut, and check the mounting hole center spacing, flange outside diameter, and thickness. This catalog page provides only the title of the mounting flange dimension table; it does not list specific dimensions or model codes. Refer to the selected locating nut's specification page and corresponding drawing for actual dimensions.

CUJ Series Compact Free-Mount Cylinders
The CUJ series compact free-mount cylinder is a compact pneumatic actuator suitable for installation in multiple orientations and confined spaces in automated equipment for clamping, positioning, material handling, and other applications. Models are selected by combining bore size, stroke, mounting style, and suffix codes. The catalog lists CUJU-B-12-30-D as an example, with a 12 mm bore and a 30 mm stroke. When selecting a complete model, consider the load, mounting orientation, operating pressure, and sensor accessory requirements.

MXS Series Pneumatic Slide
The MXS Series pneumatic slide is a compact pneumatic actuator that integrates a double-acting cylinder with a linear guide. It is designed for applications requiring short strokes, high guide accuracy, and space-saving installation. The catalog lists a basic MXS12 bore and 50 mm stroke configuration, with model codes selected according to the stroke adjuster (AS front end, AT rear end, B belt end) and available options. The slide offers high rigidity and easy installation, making it suitable for automated fixtures, inspection, feeding, and other applications.

HLH Series Side-Rail Precision Slide Table Cylinder
The HLH series side-rail precision slide table cylinder is a pneumatic actuator that integrates a cylinder with a side-rail guide mechanism. It is suitable for automated applications requiring precise linear sliding, positioning, and short-stroke reciprocating motion. Its compact design and side-rail guide can accommodate moderate lateral loads, providing smooth movement and high repeat positioning accuracy. Common applications include fixtures, material handling, inspection, and small assembly equipment. Models are designated HLH-[bore]-[stroke]-[magnet]. For example, HLH 20 × 30 S indicates a 20 mm bore, a 30 mm stroke, and an included magnet. Available bore sizes include 6, 16, and 20 mm, and available strokes include 8 and 30 mm. A blank magnet code indicates no magnet, while S indicates an included magnet.

BDF Series Positioning Cylinder
The BDF series is a magnetic-type positioning cylinder; the same series coding also includes the standard BDU type. The model number consists of five parts: series code, bore, stroke, piston rod height, and magnet code. For example, BDF-40-30-L25-S indicates a 40mm bore, 30mm stroke, L25 piston rod height, and a magnet. A blank magnet code means no magnet, while S indicates a magnet. The series is suitable for automated fixtures, tooling, and small actuators requiring position holding or positioning. Select the piston rod height and magnet option according to the bore, stroke, and available installation space.

Miniature Bridge-Type Cable Drag Chain, Non-Opening, Series 5
This is a miniature, non-opening bridge-type cable drag chain with a 5 mm inner width, R10 bend radius, B (non-opening) style, 8 mm outer height, 8.6 mm outer width, 2.4 mm hole diameter, A hole spacing, and C color. The allowable temperature is 8.5°C (to be confirmed). Included accessory: model HXSD01-5-5C. Suitable for cables under 5 mm in diameter. The material is not specified, and the operating temperature range has not been confirmed.

MK Series Rotary Clamp Cylinder
The MK series rotary clamp cylinder is a pneumatic actuator that converts linear piston motion into rotary and clamping action. It is commonly used for rapid workpiece clamping and swing-away clearance at loading and unloading stations on machine tools, fixtures, and automated assembly lines. The ordering code is divided into “series—mounting bracket—bore—stroke—rotation direction—cylinder options”: the series is always MK; mounting options are standard (no symbol) or rodless-side flange type G; bore sizes range from Φ12~Φ63; the stroke is selected according to the bore; rotation is either right R or left L, allowing symmetrical layouts for mirrored stations. Cylinder and accessory options include standard female thread (no symbol), with cap N, with cap for specified bore ranges RC, NPT thread TN, and G thread TF. The cylinder is also available with a magnet S or without a magnet (blank); a magnetic switch can be used with the magnet-equipped version to detect the clamped position. The cylinder body is typically made of anodized aluminum alloy, the piston rod is hard chrome-plated, and the seals are wear-resistant for long-term operation in medium-frequency clamping applications. When selecting a model, confirm the bore, stroke, rotation direction, and mounting bracket type, and note the differences in the RC cap option between the Φ12~Φ25 and Φ32~Φ63 size ranges.

SRC Series Swing Clamp Cylinder
The SRC series swing clamp cylinder is a pneumatic actuator that converts the linear motion of a piston rod into rotary motion to clamp workpieces. It is available with left-hand (L) or right-hand (R) rotation, in bore sizes of Φ25, Φ32, Φ40, Φ50, and Φ63mm, with rotation angles of 90° or 180°. Clamp arm options include a single-sided arm (no symbol) and a double-sided arm (D). The double-sided arm is not available for the Φ25 bore size. Compact and easy to install, the cylinder is widely used for clamping, positioning, and turning workpieces in automated equipment.

ACK Series Swing Clamp Cylinder
The ACK series swing clamp cylinder is a pneumatic actuator that uses a guide mechanism to convert the piston's linear motion into a 90° or 180° rotation followed by a downward clamping motion. It is commonly used for workpiece clamping, turning, and positioning. The model designation consists of the ACK series code, rotation direction (L for left / R for right), bore size, and rotation angle, as in ACK-L-25-90. The rotation direction determines how the clamp arm swings in and out and should be selected to suit the fixture layout. Rotation angles are available in 90° (right-angle swing-in) or 180° (opposite-side swing-in). Common bore sizes include Φ25, Φ32, Φ40, and Φ50; larger bores provide greater output torque and clamping force. A magnet can be fitted on request for position detection using a magnetic switch. Various mounting accessories are available for installation on fixture plates. When selecting a model, calculate the required clamping torque based on the workpiece mass and clamp arm overhang, and allow sufficient clearance for rotation to prevent interference with surrounding fixtures.

CJP Series Pin Cylinders
The CJP series comprises single-acting pin cylinders, also known as pen cylinders, with spring return. Their slender bodies, compact size, and light weight make them suitable for pushing, positioning, stopping, and clamping small workpieces where installation space is limited. The catalog lists bore sizes of 6, 10, 12, and 16 mm. The available mounting style is B (panel mount), and the rod end is optionally available in S (unthreaded) form. Models are coded in the order CJP, mounting style, bore, stroke, and rod-end thread. Select the stroke according to application requirements. In the model code, D indicates a built-in magnetic ring, while CJ indicates no built-in magnetic ring. Models with a built-in magnetic ring can be fitted with magnetic switches for position detection. Use purified compressed air as the operating medium, stay within the allowable stroke and load ranges, and avoid side loading and impacts to ensure smooth operation and a long service life.

MPE Series Threaded Cylinder
The MPE series threaded cylinder is a pneumatic actuator designated by the series code MPE in the catalog. Models are selected by bore, stroke, and the orientation of the piping port on the rodless end cap. The example model MPE 16 X 15 - N indicates a 16 mm bore, a 15 mm stroke, and port orientation N. This series is suitable for compact pneumatic applications requiring threaded mounting or a specific piping orientation. Confirm the bore, stroke, and port orientation combination when selecting a model. This page explicitly provides only the example combination; refer to the applicable selection table for other specifications.

MSQ Series Rack-and-Pinion Rotary Cylinder
The MSQ series rack-and-pinion rotary cylinder converts the linear reciprocating motion of a piston into rotary oscillation of the output shaft. It offers high output torque, smooth rotation, a compact design, and slip-free startup. Bore sizes are 20, 25, 32, 40, 50, 63, 80, and 100 mm, selectable according to the load and required torque. Mounting and configuration options include basic, axial, rod-side flange, non-rod-side flange, rod-side trunnion, non-rod-side trunnion, and clevis types. A protective cover is also available. The cylinder can be fitted with a built-in magnetic ring for use with a magnetic switch to detect the end of rotation. The non-lubricated type uses rubber cushioning and can be operated with or without lubrication. The series is widely used for turning, clamping, indexing, and shifting workpieces, as well as opening and closing valves, dampers, and material gates. To specify a complete model, combine the series number, bore size, protective cover, configuration, and magnetic switch model in that order.

Miniature bridge-type cable carrier, non-openable, Series 7
This series of miniature bridge-type cable carriers features a non-openable design and is suitable for guiding and protecting cables with a diameter of less than 5 mm. It is made of PA6+G30 (nylon 6 with 30% glass fiber), is black, and has an allowable operating temperature range of -20°C to 120°C. The number of carrier links per meter = 1000 + pitch. Cable carrier connectors are sold as a complete set (including moving-end and fixed-end connectors). Model HXSD02 is the base model, with an internal height of 7 mm and options including a bend radius of R15. It can be paired with fixed-end connectors such as HXSD02-7-C. Ordering example: HXSD02-7-7-R15B + length + connector model. Some models are currently in mold development.

MQR Series Low-Torque Rotary Cylinder
The MQR series low-torque rotary cylinder (described in the catalog as a low-rotational-torque rotary joint) is a compact oscillating/rotary cylinder from Haoda Pneumatic (H&N). An internal vane or rack mechanism drives the output shaft at low torque for automated applications such as workpiece turning, indexing, clamping, and oscillating light loads. The model code begins with MQR, followed by the bore size and rotation angle, with protection and magnetic switch codes appended after the angle. For example, MQR20-180SZ specifies a Φ20 bore, a 180° rotation angle, S protection, and a Z magnetic switch. An optional built-in magnetic ring allows a magnetic switch to be fitted for position detection. Basic configurations include a dual-shaft version. The catalog page provides only an example model code and basic parameters (bore size and rotation angle). Final selection must take load inertia, rotation time, and allowable kinetic energy into account. The operating medium is clean compressed air, and use without oil lubrication is recommended.

HFY Series Y-Type Pneumatic Grippers
The HFY series consists of Y-type (angular opening and closing) pneumatic grippers, a type of pneumatic actuator used to pick, grip, position, and transfer small workpieces on automated production lines. The series is available in two configurations: standard double-acting and single-acting, normally open. Double-acting models open and close the fingers by alternately supplying air to the two ports, while single-acting, normally open models use a return spring to remain open when air pressure is lost, making them suitable for applications with safety requirements. Six bore sizes are available: 6, 10, 16, 20, 25, and 32 mm. Larger bores provide greater gripping force and opening stroke, allowing selection based on workpiece size and required gripping force. Models use a simple “HFY-bore” designation, such as HFY-10. Optional finger and gripper body configurations, such as side threaded-hole mounting, through-hole mounting in the opening and closing direction, and flat fingers, can be selected as needed with reference to options for grippers in the same series. Compact and lightweight, the grippers offer flexible mounting options and can be paired with magnetic switches to detect fully open and closed positions. They are widely used in automated equipment for consumer electronics assembly, packaging, lithium battery production, and automotive components.

HDW Series Heavy-Duty Mechanical Gripper
The HDW series heavy-duty mechanical gripper is a pneumatic actuator designed for automated gripping and holding. It offers high gripping force and structural rigidity, making it suitable for workpiece handling, positioning, and clamping. The series is specified primarily by bore size, with eight options: Φ20, Φ25, Φ32, Φ40, Φ50, Φ63, Φ80, and Φ100 mm. The base model is coded as HDW-[bore size]. Sensors can be added to detect gripper jaw status. Available sensor models are CS-8G, CS-8GN, CS-8GP, CS-9D, CS-9B, and CS-9H, with a choice of 1 or 2 sensors as needed. Leave this option blank if no sensor is required. When selecting a model, first determine the bore size based on gripping force, workpiece dimensions, and installation space, then select the sensor and quantity according to detection requirements.

RMH Series Magnetically Coupled Rodless Cylinder
The RMH series magnetically coupled rodless cylinder is a basic pneumatic actuator without a switch rail. It uses magnetic coupling and is available in five bore sizes: Φ10, Φ15, Φ20, Φ30 and Φ40mm. Magnetic holding force is available in high (H) and low (L) options to suit load and speed requirements. The stroke is specified to meet application needs. Magnetic switch options include no switches, 2 switches, 1 switch (S) or n switches. With a compact design and no exposed piston rod, the series is suitable for long-stroke automated conveying, positioning and clamping applications where space is limited. When selecting a model, specify the bore, magnetic holding force, stroke and magnetic switch configuration. Note limitations such as the N type being applicable only to the standard type and the magnet being built into the switch rail.

Z Series Miniature One-Piece Cable Carrier
The Z Series miniature cable carrier features a one-piece design and a small pitch for smooth operation with low vibration and noise. It protects cables and pneumatic hoses in space-constrained applications such as electronic equipment, precision machinery, semiconductor equipment, and medical instruments. Its smooth interior is gentle on cables and hoses, helping reduce cable wear, while a multi-point stop design ensures high stability during operation. Optional one-piece connectors support both forward and reverse mounting. Common specifications include an inner width (F) of 10~20 mm and an inner height (B) of 10~15 mm, with corresponding outer widths of 18~28.4 mm, outer heights of 13.2~19.3 mm, bend radii of 18~28 mm, and pitches of 13.6~28 mm. Materials, colors, and connector configurations can be selected as needed.

M Series Open-Frame Cable Carriers
M Series open-frame cable carriers support and protect cables, oil hoses, pneumatic hoses and other lines in machine tools and automated equipment, moving back and forth with moving components. Their open-frame design features crossbars that open on either the outer or inner radius for easy cable installation and maintenance. Optional one-piece mounting brackets can be installed in either orientation, and strain-relief comb plates are available. Internal separators can be added to keep multiple lines apart. The short-pitch design ensures smooth operation with low vibration and noise, while the smooth inner surfaces protect the lines. QN18/QN20 semi-enclosed cable carriers with opening crossbars have an inner width of 18~50mm, an inner height of 18/20mm, a bend radius of 28~70mm and a pitch of approximately 30~55mm. Select the model based on inner width, bend radius and number of links.

HXSD Lightweight Cable Carrier Series
The HXSD Lightweight Cable Carrier Series is ShengdA’s complete cable protection system, comprising bridge-type cable carriers, corrugated tubing, and fittings. The carrier body is made of PA6+GF30. Its crossbars can be opened from either the inner or outer bend radius, and the design supports S-shaped routing. Testing has demonstrated a service life of over 15 million cycles. The system comes with PP/PE corrugated tubing (operating temperature: -30 to 110°C; flame-retardant rating: FV-0 or V-2) and quick-connect fittings with German, metric, and imperial thread types (PG/M/G; IP68 protection rating). These products are widely used in robotics, industrial automation, new energy vehicles, aerospace equipment, and other fields, providing reliable cable protection and convenient plug-in installation.

Q(F)Z45 Heavy-Duty Cable Carrier
The Q(F)Z45 heavy-duty cable carrier is available in two designs: the Q series with an openable bridge-style structure and the F series with an openable enclosed structure. It runs smoothly and provides high stability, making it suitable for guiding and protecting cables, oil hoses and other lines in machine tools and automated equipment. The series has an inner height of 45 mm and inner widths of 50, 60, 75, 100, 125 and 150 mm, with corresponding outer widths of 82~182 mm, an outer height of 66 mm and a pitch of 68 mm. Bend radius options are 75, 100, 125, 150, 175, 200, 250 and 300 mm. Select the bend radius and number of links according to the available installation space and travel length. When ordering, use the format “carrier code-inner width-bend radius-number of links”; Q denotes the openable bridge-style design, and F denotes the openable enclosed design.

Q(F)Z Series Engineering Plastic Cable Chains
The Q(F)Z series consists of domestically manufactured engineering plastic cable chains that guide and protect cables and oil hoses in machine tools and automated equipment. They offer smooth, stable operation, wear resistance, and low noise. By construction, they are available in two types: the Q series (QZ, openable bridge type) and the F series (FZ, openable enclosed type). By load capacity, they are available as the Q(F)Z35 standard type and Q(F)Z45 reinforced type. Models use a four-part code: “cable chain code-inner width-bend radius-number of links.” The inner width is the internal cavity width F, the number of links is the chain link count, and the bend radius determines the minimum turning size. For example, the Q(F)Z45 reinforced type has an inner height of 45 mm and inner widths of 50/60/75/100/125/150 mm, corresponding to outer widths of 82/92/107/132/157/182 mm. Its outer height is 66 mm, available bend radii are 75/100/125/150/175/200/250/300 mm, and its pitch is 68 mm. To select a model, first determine the inner width and height based on the outside diameter of the cable bundle, then select the bend radius according to the available installation space and travel distance, and finally calculate the number of links from the required length.

Q(F)Z55 Heavy-Duty Cable Carrier
The Q(F)Z55 heavy-duty cable carrier is made of engineering plastic and protects cables and oil hoses as it travels back and forth with moving components in machine tools and automated equipment. The series is available in two designs: QZ55 is an openable bridge type, while FZ55 is an openable enclosed type. Both offer smooth operation and high stability. All sizes have an inner height (B) of 55 mm, an outer height (C) of 82 mm, a pitch (P) of 78 mm, and a standard bend radius (R) of 100 mm. Nine inner widths (F) are available: 75, 100, 125, 150, 175, 200, 225, 250, and 300 mm, with corresponding outer widths (E) ranging from 110 mm to 335 mm. For every 25 mm increase in inner width, the outer width increases by 25 mm. The 75 mm inner width is available only in the QZ55 bridge design; all other widths are available in both QZ55 and FZ55 designs. When ordering, complete the model designation with the required bend radius (R) and number of links (N), based on the travel distance and available installation space.

Q(F)Z65 Heavy-Duty Cable Carrier
The Q(F)Z65 heavy-duty cable carrier is available in two designs: the QZ65 openable bridge type and the FZ65 openable enclosed type. Both provide smooth operation and high stability. The inner height is 65 mm, and inner widths start at 75 mm, with common sizes including 75, 100, 125, 150, 175, 200, 225, 250, and 300 mm. The outer width increases with the inner width; the 75 mm inner width corresponds to an outer width of 114 mm and an outer height of 95 mm. The bend radius R and number of links N can be selected according to equipment travel and installation space. Complete the model designation as Q(F)Z65.[inner width].[bend radius].[number of links]. Suitable for guiding and protecting cables, oil hoses, and pneumatic hoses in machine tools and automated equipment, the heavy-duty design improves load capacity and wear resistance.

Lightweight Economy Cable Carrier
The lightweight economy cable carrier is a flexible protective chain that guides and protects moving cables, pneumatic lines, and hydraulic hoses in machine tools, automation equipment, and robotics. Designed for low weight and cost, the series offers six structural features: mounting brackets that can be attached in any direction on any surface for flexible installation; smooth interior surfaces that minimize wear on cables and hoses; crossbars and side plates with a double-locking connection for strong pull-out resistance and stable operation; interlocking side plates that provide high overall rigidity and stability when assembled; noise-reducing brakes for quiet operation; and a range of optional strain-relief accessories, such as clamps, separators, and comb plates, that can be configured to suit the cable and hose layout. It is suitable for reciprocating applications with short to medium travel and moderate loads. Users can select a model based on inner width, inner height, bend radius, travel length, and mounting method.

JGA(B)45 Series Lightweight, Economy Cable Chains
JGA(B)45 series lightweight, economy cable chains are injection-molded from engineering plastic. They have an inner height of 45mm, an outer height of 66mm, and a pitch of 68mm. Inner widths range from 50~300mm, with corresponding outer widths of 82~332mm, across 15 inner width options. Bend radii of 100, 125, 150, 175, 200, 250, and 300mm are available. Select the R value according to travel distance and installation space, along with the appropriate number of links N. Two designs are available: the JGA45 series is an open-style chain that can be opened, while the JGB45 series is an enclosed chain that can be opened. Both make it easy to install and maintain cables, hydraulic hoses, and pneumatic hoses. The chains run smoothly, offer high stability, and have an attractive appearance. They are suitable for guiding and protecting moving cables on machine tools, automated equipment, robots, and more. When ordering, use the JGA(B)45-F-R-N code, specifying the chain code, inner width F, bend radius R, and number of links N in sequence.

JGA(B)45 Series Lightweight, Economical Cable Carriers
The JGA(B)45 series consists of lightweight, economical engineering-plastic cable carriers available in two designs with the same 45 link height: the JGA45 openable type has links that flip open for easy cable installation and maintenance, while the JGB45 enclosed openable type has an enclosed exterior that can be opened. Both have identical overall dimensions and pitch. All models have an inner height B of 45 mm, an outer height C of 66 mm, and a pitch P of 68 mm. Inner width F ranges from 50~300 mm in 15 options, with corresponding outer width E from 82 mm to 332 mm, increasing by approximately 25.5 mm per inner-width increment (inner width +32 mm). Seven bending radii R are available: 100/125/150/175/200/250/300 mm. The number of links N is determined by the actual travel and installation method. The carriers offer smooth operation, high stability, and an attractive appearance. They guide and protect cables and oil hoses in machine tools and automated equipment and can be customized on request.

HL Series Linear Guideways
HL series linear guideways are available in three accuracy grades: Normal (C), High (H), and Precision (P). Sizes include HL-15, HL-20, HL-25, HL-30, HL-35, HL-45, and HL-55. Height and width tolerances vary by accuracy grade, making them suitable for guiding linear motion in automation equipment.

Miniature bridge-type cable carrier, outward-opening, Series 18
The Miniature Bridge-Type Cable Carrier, Outward-Opening, Series 18 is a cable carrier system designed to protect cables and hoses. Its outward-opening design makes installation and maintenance from the outside easy. The number of links per meter is determined by the pitch (links per meter = 1000 + pitch). Cable carriers are sold as complete sets, including the moving end and the fixed end. This series offers a range of inner widths and bend radii, making it suitable for various automation equipment and compact moving applications. Specifications include inner width B1, bend radius R, outer height H2, and outer width B, allowing users to select a model to suit their needs. Cable carriers are typically made from engineering plastics and are lightweight, wear-resistant, and quiet in operation.

JGA(B)55 Lightweight, Economical Cable Carrier
The JGA(B)55 series is a lightweight, economical cable carrier designed to protect and guide cables, oil hoses and pneumatic hoses during reciprocating motion in machine tools and automated equipment. JGA55 has an openable bridge-style design, while JGB55 has an openable enclosed design. The inner height is 55mm, the inner width is 50~250mm, the outer width varies with the inner width, and the pitch is 89mm. Bend radius options are 125, 150, 175, 200, 250, 300, 400 and 500mm. The product code follows the format “cable carrier code.inner width F.bend radius R.number of links N”; users can complete the model designation according to the required bend radius and number of links. The links are made of engineering plastic and are lightweight, wear-resistant, economical and easy to install.