product — Page 67

GD-Type Chrome-Plated Linear Shaft

GD-Type Chrome-Plated Linear Shaft

The GD-type chrome-plated linear shaft belongs to the cylindrical linear guide (round shaft) series. It is made of GCr15 or 45# high-carbon steel and chrome-plated on the surface. Its hardness is HRC 62+2 (45#: HRC 58), with a surface hardening depth of 0.8–2.5 mm, surface roughness of 0.8–1.6S, straightness of 80 μm/1000 mm, and roundness of no more than 3.0 μm. Both solid and hollow versions are available. Solid shaft sizes are available to suit all of our linear bearings, while hollow shafts are offered only in diameters greater than 12 mm. Shaft diameters range from Φ3 mm to Φ80 mm, with a G6 tolerance grade. These shafts are suitable for automation equipment requiring high-precision linear motion and offer good wear and corrosion resistance.

BF Series Ball Screw Support Units

BF Series Ball Screw Support Units

The BF series consists of round-flange support units for the supported end of ball screws. Their round-flange design makes installation easy and is suitable for a wide range of automation equipment. Consult the catalog for dimensions, bearing types, and compatible screw diameters. This page includes ordering code examples such as BF3000 and BFD.

AR Series Linear Guides

AR Series Linear Guides

The AR Series is a range of linear guides. The catalog page presents mounting and overall dimensions in an “Overall Dimensions” table, making it easy to check rail widths, mounting hole spacing, and block dimensions for automated equipment. The OCR output for this page retains only the series title and part of the table structure; it does not provide complete model codes, accuracy grades, lengths, or load ratings. Refer to the complete catalog data when selecting a model, and choose the appropriate specification based on installation space and load requirements.

AFR Series Filter Regulators

AFR Series Filter Regulators

The AFR series filter regulator is a pneumatic air preparation component used to filter compressed air and regulate its pressure. The series includes AFR1500, AFR2000, BFR2000, BFR3000, and BFR4000 models, with port sizes from G1/8" to G1/2". The operating fluid is air, the pressure adjustment range is 0.05~0.85MPa, the maximum adjustable pressure is 0.95MPa, the proof pressure is 1.5MPa, and the operating temperature range is 5~60℃. Filter bowl capacities are 15cc for AFR1500/AFR2000 and 60cc for BFR2000/BFR3000/BFR4000, with respective weights of 0.26kg and 0.40kg. The product offers stable pressure regulation and high filtration precision, making it suitable for a variety of pneumatic systems.

BFR Series Filter Regulators

BFR Series Filter Regulators

The BFR series filter regulator combines air filtration and pressure regulation in a single air preparation unit. It cleans compressed air and delivers a stable, preset pressure to pneumatic systems. The operating fluid is air, and port sizes include G1/4", G3/8", and G1/2". The regulating pressure range is 0.05~0.85MPa, the maximum adjustable pressure is 0.95MPa, the proof pressure is 1.5MPa, and the operating temperature range is 5~60℃. The filter bowl has a capacity of 60cc, and the unit weighs approximately 0.40KG. Compared with the AFR series on the same page (AFR1500/AFR2000, G1/8" and G1/4" ports, 15cc filter bowl, and 0.26KG weight), the BFR series has larger ports and a larger collection bowl, making it suitable for pneumatic circuits with higher flow requirements.

LFR Series Filter Regulators

LFR Series Filter Regulators

The LFR series filter regulators combine filtration and pressure regulation for compressed air preparation. They remove moisture and particulate contaminants from compressed air and provide stable operating pressure for downstream pneumatic circuits. They are available with or without a pressure gauge. The series comes in four sizes: Micro, Mini, Midi and Maxi. Air connections include M5, M7, QS4 and QS6 push-in ports, as well as 1/8, 1/4, 3/8, 1/2, 3/4 and 1 inch threaded ports. The units are pipe-mounted and must be installed within ±5° of vertical. Filtration ratings are 5μm and 40μm, with a maximum filtered particle size of approximately 0.2~0.4μm. Pressure adjustment ranges are 0.5~7 bar and 0.5~12 bar, with pressure set by turning the knob. Preset pressure gauges are available, with different gauges corresponding to sizes such as M5, G1/8 and G1/4. Condensate drain options are manual, semi-automatic (H) and fully automatic (A). Maximum condensate capacities are 3/22/43/80 cm³ for Micro/Mini/Midi/Maxi, respectively.

LF Series Air Filters

LF Series Air Filters

The LF series comprises air filters in the SNS air preparation range. They use a sintered filter element with a water separator to remove moisture, oil mist and solid particles from compressed air, supplying clean air to downstream pneumatic components. Three frame sizes are available: MINI (small), MIDI (medium) and MAXI (large), with G1/8, G1/4, G3/8, G1/2, G3/4 and G1 port threads. Filtration ratings are 40μm and 5M (5μm). Drain options include a manual drain valve (maximum working pressure 16bar) and a type A automatic drain valve (working pressure 1.5~12bar). Maximum condensate capacity is 22ml, the operating temperature is 0~60℃, and installation must be vertical within ±5°. Pipe or bracket mounting is supported. The working medium is lubricated or unlubricated compressed air, and the filter bowl and body are made primarily of plastic and die-cast aluminum.

LR Series Pressure Regulators

LR Series Pressure Regulators

The LR series pressure regulators are SNS Automation air preparation components designed to reduce and stabilize pressure in filtered compressed air lines, with or without lubrication. They are available in MINI, MIDI and MAXI sizes, with G1/8, G1/4, G3/8, G1/2, G3/4 and G1 ports. They support in-line, bracket or panel mounting in any orientation. Working pressure is 12bar, with an adjustment range of 1-16bar; the LR-...-7- model has a range of 0.5-7bar (the catalog also specifies 0.5-12bar/0.5-7bar). Operating temperature is 0-60℃. Body materials include plastic and die-cast aluminum, with nitrile rubber seals and a POM pressure adjustment knob. Diaphragm and piston designs are available, and OMA series pressure gauges can be fitted.

OMA Series Pressure Gauges

OMA Series Pressure Gauges

OMA series pressure gauges are mechanical dial gauges for pneumatic systems. They are installed in the pressure port of a pressure regulator or in a pneumatic circuit to provide a visual indication of air pressure. Dial diameters are available in 40mm and 50mm. Pressure ranges are 0-16bar for circuits with a working pressure of 0-12bar and 0-10bar for circuits with a working pressure of 0-7bar. The G1/8 or G1/4 threaded connection screws directly into the valve body's pressure port. The model code follows the format OMA-dial diameter-pressure range-connection size. For example, OMA-40-16-1/8 indicates a 40mm dial, a 0-16bar range, and a G1/8 connection; OMA-50-10-1/4 indicates a 50mm dial, a 0-10bar range, and a G1/4 connection. These gauges are commonly used with air preparation components such as LR series pressure regulators.

LOE Series Lubricator

LOE Series Lubricator

The LOE series consists of automatic variable-restriction oil-mist lubricators for lubricating pneumatic components in compressed air lines. They are available in three sizes, MINI, MIDI and MAXI, according to port size and overall dimensions. The operating medium is compressed air, and the automatic variable-restriction design adjusts oil delivery according to flow. The units can be pipe-mounted or bracket-mounted and must be installed within ±5° of vertical. Maximum operating pressure is 16bar, operating temperature range is 0~60℃, and maximum oil/condensate capacity is 22ml. The minimum flow required for mist generation is approximately 3 l/min for MINI and 6 l/min for MAXI. Standard rated flows are 1300/2300/2700, depending on size. The body is die-cast aluminum; the oil bowl and sight glass are made of PC and fitted with an aluminum alloy protective guard. Seals are nitrile rubber. ISO VG 32 or equivalent lubricating oil is recommended. Port sizes include G1/8", G1/4", G3/8", G1/2", G3/4" and G1". Common models combine these port sizes with the MINI/MIDI/MAXI sizes.

TD Series

TD Series

The TD Series comprises chrome-plated cylindrical linear guide shafts (linear shafts), part of the company’s range of cylindrical linear guides. Made from GCR15 or 45# high-carbon steel, they have a hardness of HRC 62+2 (45#: HRC 58), a surface-hardened layer 0.8–2.5 mm thick, surface roughness of 0.8–1.6S, straightness of 80 μm/1,000 mm, and roundness no greater than 3.0 μm (Rmax). Solid and hollow shafts are available. The solid shafts cover the full size range of the company’s linear bearings, while hollow shafts are available only in diameters greater than 12 mm. Shaft diameters range from Φ3 mm to Φ80 mm, with a G6 tolerance grade. They are suitable for linear motion applications requiring high-precision guidance and corrosion resistance.

UFR/L Series Two-Piece Air Preparation Units

UFR/L Series Two-Piece Air Preparation Units

The UFR/L series two-piece units are part of the SNS U series of air preparation components, providing compressed air filtration, pressure regulation and oil mist lubrication. Port sizes include 1/4, 3/8, 1/2, 3/4 and 1 inch. Filtration ratings of 40um or 5um are available. The pressure range is 0.1-1.0MPa, proof pressure is 1.5MPa, and ambient temperature range is -10-60℃. ISO-VG32 oil is recommended. When ordering, select the appropriate combination of port thread, filtration rating and drain type. These units are suitable for air preparation circuits in automated equipment.

SFC Series Two-Piece Air Preparation Units

SFC Series Two-Piece Air Preparation Units

The SFC series two-piece air preparation unit combines filtration, pressure regulation, and lubrication for pneumatic systems. Its compact design offers high flow, stable output pressure, and easy installation. A pressure gauge and mounting bracket are included. The lubricator can be refilled without interrupting the air supply, and all sizes feature a bowl guard. Nominal sizes 200, 300, and 400 correspond to port sizes G1/4", G3/8", and G1/2", respectively. Drain options include differential pressure drain (blank), automatic drain (A), and standard manual drain (□). Proof pressure is 1.5 MPa, maximum operating pressure is 1.0 MPa, and ambient and media temperature range is 5~60 ℃.

QTY Series Pressure Regulators

QTY Series Pressure Regulators

The QTY series consists of pressure regulators (pressure-reducing valves) for pneumatic systems. They reduce high supply pressure and stabilize it at a set value for downstream pneumatic circuits. The series includes 8 sizes (QTY-8 ~ QTY-50), with common port threads including G1/4", G3/8", G1/2", G3/4" and G1". The operating ambient temperature range is 5~60℃, nominal input pressure is 1.0MPa, maximum input pressure is 0.63MPa, and regulating range is 0.05~0.63MPa, allowing stable regulation at low pressures. Valve body outside diameters include Φ64, Φ104/Φ105 and Φ120/Φ130; overall length L ranges from 173mm to 280mm, and mounting height A is 80/108/130mm. The catalog also provides air flow data at an inlet pressure of 1MPa and an outlet pressure drop of 0.05MPa. Flow increases from 680L/min to 3200L/min as nominal bore size increases, helping users select a valve matched to the air consumption of downstream actuators.

QSL Series Air Filter and Water Separator

QSL Series Air Filter and Water Separator

The QSL series air filter and water separator cleans compressed air by removing moisture and solid particles. It is typically installed upstream in pneumatic systems. Ambient temperature: 5-60℃; nominal inlet pressure: 0.63MPa; filtration rating: 50-70μm; water separation efficiency: ≥85%. Connection threads include G1/4, G3/8, G1/2, G3/4 and G1, with models ranging from QSL-8 to QSL-50. The pressure drop–airflow chart shows airflow rates at different inlet pressures. Overall dimensions are labeled A, D, D1, D2, L0, L1 and L.

QIU Series Air Lubricators

QIU Series Air Lubricators

QIU series air lubricators lubricate pneumatic systems by atomizing oil and delivering it to actuators with compressed air. The catalog covers QIU-8, QIU-10, QIU-15, QIU-20, QIU-25, QIU-35, QIU-40, and QIU-50 models. They operate at ambient temperatures of 5~60℃ with a nominal inlet pressure of 1.0MPa and can be refilled without shutting down. Connection sizes range from G1/4"~G1". The catalog also lists overall dimensions and pressure drop versus airflow data for each model (the minimum airflow for misting is approximately 75~850 L/min at an inlet pressure of 0.4MPa).

QFLH Series Air Filters

QFLH Series Air Filters

QFLH series air filters are air preparation components manufactured by SNS Automation (Ningbo) Group Co., Ltd. Installed in compressed air lines, they remove moisture, oil mist, and solid particles to protect downstream pneumatic equipment such as cylinders and solenoid valves. The series includes eight models from QFLH-08 to QFLH-50, with port sizes from G1/4 to G2 to meet the needs of both low- and high-flow air systems. Filter elements are available with filtration ratings of 20μm or 40μm. The working pressure range is 0.15~4.0MPa, the maximum input pressure is 4MPa, the operating temperature range is 5~80℃, and the working fluid is air. The housings have standard threaded ports, with each model's port size matched to its flow capacity. They are suitable for pre-filtration and point-of-use protection in general industrial compressed air systems.

FS Series Cylindrical Linear Guide

FS Series Cylindrical Linear Guide

The FS Series stainless steel cylindrical linear guide (smooth shaft) is designed for corrosive environments. Made of stainless steel, it has a hardness of HRC 62+2, a surface hardening depth of 0.8–2.5 mm, surface roughness of 0.8–1.6S, straightness of 80 μm/1000 mm, and roundness of no more than 3.0 μm. Shaft diameters range from Φ3 to Φ80 mm. Solid and hollow shafts are available, with custom lengths. Used with linear bearings, it provides high-precision linear motion.

QTYH Series Air Filters

QTYH Series Air Filters

QTYH series air filters clean the air supply in pneumatic systems by removing solid particles and contaminants from compressed air, protecting downstream components such as solenoid valves and pneumatic cylinders. The series is available in eight sizes: 08, 10, 15, 20, 25, 32, 40 and 50, with corresponding port sizes G1/4, G3/8, G1/2, G3/4, G1, G11/4, G11/2 and G2. They cover applications from low-flow air lines serving individual machines to high-flow main air lines. The working medium is air, and filter elements are available in 20μm and 40μm grades for general filtration. The working pressure range is 0.15-4.0MPa, the maximum inlet pressure is 4MPa, and the operating temperature range is 5-80℃. The model code consists of QTYH followed by a two-digit size code, with each size code corresponding to a port size. Select a model to match the pipe diameter and required flow rate.

HAD Series Automatic Drains

HAD Series Automatic Drains

The HAD series consists of float-operated automatic drains that discharge condensate from compressed air systems, including air compressors, air receivers and filters. When the bowl is not pressurized, the float drops under its own weight, the valve closes the chamber opening, and the spring pushes the piston down, allowing condensate to flow out through the drain passage. When the pressure in the bowl exceeds 1kgf/cm², the piston moves upward against the spring, closing the drain passage and isolating the bowl from the outside. Once condensate reaches a certain level, buoyancy raises the float, opening the inner chamber port and allowing pressure into the chamber. Pressure and the spring then push the piston down, discharging condensate through the drain tube. Specifications include a proof pressure of 1.0~1.5MPa, a maximum operating pressure of 1.0MPa, an operating pressure range of 0.15~1.0MPa, ambient and fluid temperatures of 5~60℃, a 1/2 inlet port, a 3/8 or 1/2 drain port, and a weight of 0.62~0.91kg. The HAD400-04 includes a manual switch. The body is die-cast aluminum and the seals are NBR. For installation, use a drain tube with an inside diameter of at least Φ10mm and a length no greater than 5m; it must not bend upward. The compressor power rating must be greater than 3.7kW.

QFRH Series Air Filters

QFRH Series Air Filters

QFRH series air filters are air preparation components that remove solid particles and condensate from compressed air, providing clean air to downstream pneumatic components such as cylinders and solenoid valves. The series comprises 7 nominal sizes: QFRH-10, QFRH-15, QFRH-20, QFRH-25, QFRH-32, QFRH-40 and QFRH-50, with corresponding port sizes of G1/4, G3/8, G1/2, G3/4, G1, G1-1/4 and G1-1/2 (larger sizes up to G2). Filter elements are available in 20μm or 40μm ratings to suit downstream cleanliness requirements. The operating pressure range is 0.05~3.5MPa, the maximum inlet pressure is 4MPa, and the operating temperature range is -25~+80℃. The working medium is air. The bowl has a protective guard (PA69) and a round bent mounting bracket for easy attachment to equipment panels or piping. These filters are widely used for upstream air purification and pre-filtration on automated production lines in packaging, assembly, machine tools, automotive, electronics and other industries.

PC Series Push-to-Connect Pneumatic Tube Fittings

PC Series Push-to-Connect Pneumatic Tube Fittings

PC series push-to-connect pneumatic tube fittings are available in a range of models to meet the connection needs of pneumatic tubing systems. Their push-to-connect design allows the tubing direction to be freely adjusted after installation. The fittings offer good rigidity and resistance to vibration and contamination. RUNC PT thread sealant provides a seal, while straight threads are sealed with standard O-rings. The catalog covers PC threaded straight fittings and PC-N threaded straight fittings with NPT threads. They accommodate tube outer diameters ΦD of 4, 6, and 16 mm and 5/32, 3/16, 1/4, 5/16, 3/8, and 1/2 inches. Thread sizes include M5, M6, R1/8, R1/4, R3/8, R1/2, R3/4, NPT1/8, NPT1/4, NPT3/8, and NPT1/2. Dimensions including L1, L2, O, and φ are also provided.

PC-N Series Push-in Pneumatic Fittings

PC-N Series Push-in Pneumatic Fittings

PC-N series push-in pneumatic fittings are designed for pneumatic piping systems. The push-in mechanism locks the tube upon insertion, providing an airtight connection ready for airflow. After installation, the tube can still swivel freely for easy routing. The rigid fitting body resists vibration and prevents contaminants from entering. Tapered threads (R/PT, NPT) are coated with thread sealant for sealing upon installation, while straight threads (M5, M6) are sealed with standard O-rings. The series comprises PC threaded straight fittings (M5, M6, R1/8, R1/4, R3/8, R1/2, R3/4) and PC-N threaded straight fittings with NPT threads (NPT1/8, NPT1/4, NPT3/8, NPT1/2). Compatible tube outer diameters include 4, 6, 16 mm and 5/32, 3/16, 1/4, 5/16, 3/8, 1/2 inches. Key dimensions include tube outer diameter ΦD, thread size R, thread length L1, overall length L2, O dimension and bore diameter φ.

PC Series Threaded Straight Connectors

PC Series Threaded Straight Connectors

PC series threaded straight connectors are available in two configurations: PC-G (G thread) and PCG (M/R thread), for pneumatic tubing with an outer diameter of 4~16mm. They feature nickel-plated brass bodies and plastic release rings, offering corrosion resistance, reliable sealing, and easy connection and disconnection. Thread sizes cover G1/8~G1/2, M5~M6, and R1/8~R1/2. With a working pressure of 0~1.0MPa and a working temperature of -20~60°C, they are widely used for piping connections in pneumatic control systems, automation equipment, and machinery manufacturing.

PCF Series Straight Fittings with Parallel Threads (G Thread)

PCF Series Straight Fittings with Parallel Threads (G Thread)

The PCF series comprises straight push-to-connect pneumatic fittings with a male G (BSPP) thread on one end and a push-in tube connection on the other. They connect pneumatic tubing, such as nylon or PU tubing, directly to components with G threads. The body is typically made of nickel-plated brass or engineering plastic, with nitrile rubber (NBR) seals. Suitable for tubing with an outside diameter of Φ4 mm, the fittings are available with G1/8, G1/4, G3/8 and G1/2 threads. With a working pressure of 0~1.0 MPa and a working temperature of 0~60 °C, they are suitable for general industrial pneumatic circuits. To install, simply push the tube in until it locks; to remove it, press the collet to release it. Select the model according to the tube outside diameter and the connection thread size.

PCG Series Round-Thread Straight Fittings

PCG Series Round-Thread Straight Fittings

PCG series round-thread straight fittings are push-in fittings for pneumatic lines, presented in the catalog in three configurations: PC-G, PCG and PCF. One end has a push-in collet for pneumatic tubing with an outside diameter of Φ4~Φ16 mm; the other has a straight threaded connection in sizes including M5, M6, R1/8~R1/2 and G1/8~G1/2. They connect tubing directly to threaded ports on cylinders, solenoid valves and air preparation units. The bodies are typically made of nickel-plated brass or engineering plastic, with rubber seals for quick connection and disconnection and reliable sealing in standard industrial pneumatic circuits. Select a fitting by combining the tubing outside diameter ΦD with the required thread size. The catalog provides dimensions including ΦD1, ΦD2, L1, L2, O and width across flats φ to assist selection based on installation space and flow requirements.

PB Series Male Branch Tee

PB Series Male Branch Tee

PB series male branch tees provide branch connections in pneumatic lines and are available in G thread (M5, M6, R1/8~R1/2) and NPT thread (NPT1/8~NPT1/2) versions. Compatible tube diameters range from Φ4~Φ14 mm and 5/32~1/2 inch. Body dimensions are defined by L1, L2, L3, ΦD1 and φ, making it easy to select a fitting by tube diameter and thread size. These standardized branch fittings are suitable for pneumatic piping in factory automation systems.

PL Series L-Type Threaded Elbow

PL Series L-Type Threaded Elbow

The PL series L-type threaded elbow is a push-to-connect pneumatic fitting that connects air tubing to a threaded port at a 90° angle. It has a metal body and a push-in collet and accepts Φ4 and Φ6 metric tubing, as well as 5/32″, 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ inch tubing. Thread options include M5 and M6 metric threads and R1/8~R3/4 British tapered pipe threads; the PL-N variant uses NPT1/8~NPT1/2 American tapered pipe threads. The catalog lists all dimensions by ΦD, R, L1, L2, L3, ΦD1 and Φ1. These fittings are suitable for automation equipment, pneumatic circuits and industrial piping.

LGB Series Slider Blocks

LGB Series Slider Blocks

LGB series linear guide blocks with a 12 mm shaft diameter are available in three block lengths: 60 mm, 100 mm, and 140 mm. The basic dynamic load rating (C) ranges from 140 to 180 kgf, the basic static load rating (To) ranges from 4.3 to 5.4 kgf·m, and the allowable static moment (Tx) ranges from 3.2 to 7.2 kgf·m. Designed for precision linear motion in industrial automation equipment, they offer high rigidity and precision.

PL-N Series L-Shaped Threaded Elbow (NPT Thread)

PL-N Series L-Shaped Threaded Elbow (NPT Thread)

The PL-N series consists of L-shaped (90°) threaded elbow pneumatic push-in fittings, with an inch-size push-in tube connection and an NPT tapered pipe thread. Six tube sizes are available: 5/32", 3/16", 1/4", 5/16", 3/8", and 1/2", with four thread sizes: NPT1/8, NPT1/4, NPT3/8, and NPT1/2. Model numbers follow the format “PL+tube diameter-N+thread code” (e.g., PL1/4-N02). The body is nickel-plated brass, and the threaded end is pre-coated with sealant for direct installation into a female NPT thread without additional thread seal tape. The L-shaped design routes tubing through a 90° turn to save installation space. The catalog provides dimensions including L1 (thread engagement depth), L2 (overall length), L3 (height across flats), ΦD1 (hex width across flats), and Φ1 (thread outside diameter) for selection and clearance checks. Suitable for compressed air, vacuum, water, and other non-corrosive media. Operating pressure: 0~1.0 MPa; operating temperature: -20~60℃.

PD-N Series Threaded Branch Tee - NPT Thread

PD-N Series Threaded Branch Tee - NPT Thread

The PD-N series is a threaded branch tee fitting with push-to-connect tube ends and a threaded branch for splitting and branching pneumatic lines. The catalog lists thread sizes including G1/8, G1/4, G3/8 and G1/2, as well as a separate NPT thread series in sizes including NPT1/8, NPT1/4, NPT3/8 and NPT1/2. Models are designated PDG-01, PDG-02, PDG-03 and so on according to connection size. Each designation covers multiple dimensional configurations, including thread length, center distance, overall length, outside diameter and hex across-flats size. These are listed row by row in the catalog's dimension table. Select the appropriate fitting based on the tube outside diameter and thread size. The body is generally made of nickel-plated brass or engineering plastic and is suitable for compressed air lines. Working pressure is typically selected according to standard pneumatic fitting ratings. To install, simply insert the tube and tighten the threaded end.

PLL Series Extended L-Shaped Threaded Elbow

PLL Series Extended L-Shaped Threaded Elbow

The PLL series extended L-shaped threaded elbow is a push-in pneumatic fitting designed for right-angle connections between tubing and threaded ports. Body sizes include 04, 06, 08, 10, 12 and 15, accommodating tubing with outside diameters of 4, 6, 8, 10 and 12 mm. Thread sizes include M5, M6, G1/8, G1/4, G3/8, G1/2, R1/8, R1/4, R3/8 and R1/2. Mounting dimensions include L1, L2, L3, φD1 and φ to suit different space and flow requirements. Model numbers combine the body size and thread code, such as PLL04-M5 and PLL06-G01.

PL-G Series L-Shaped Threaded Tube Fittings

PL-G Series L-Shaped Threaded Tube Fittings

PL-G series L-shaped threaded tube fittings are push-to-connect pneumatic fittings for connecting tubing with outer diameters of 4, 6, 8, or 10 mm at a 90° angle to externally threaded pneumatic components. The push-lock mechanism seals the tube upon insertion; press the release ring to disconnect it. The listed models cover thread sizes G1/8, G1/4, G3/8, G1/2, and M5, with dimensions including L1, L2, L3, φD1, and φ provided for tubing layout and clearance checks. They are suitable for compact pneumatic connections in automated equipment, valve manifolds, cylinders, and fixtures.

PXG Series Plastic Y-Shaped Five-Way Fittings

PXG Series Plastic Y-Shaped Five-Way Fittings

PXG series plastic Y-shaped five-way fittings are pneumatic tube connectors used to split or combine airflow in automated equipment. The catalog lists four standard models: PXG06-04, PXG08, PXG08-04, and PXG08-06. The main port diameter ΦD is 6 mm or 8 mm, while the branch port diameter ΦD1 is available in 4, 6, and 8 mm. Overall dimensions include ΦD2, ΦD3, ΦD4, L, L1, and L2. Models vary by tube diameter and installation space, making them suitable for compact multi-line pneumatic connections.

PXT Series Y-Type Threaded Five-Way Fitting

PXT Series Y-Type Threaded Five-Way Fitting

The PXT series Y-type threaded five-way fitting provides branch connections in pneumatic piping, distributing air from one source to multiple actuators. It is available for tubing outside diameters including Φ4, Φ6 and Φ8 mm, with threaded connections including R1/8, R1/4, R3/8 and R1/2, as well as M5 and M6 on PXT-G variants. These options accommodate different combinations of tube diameters and threads. The catalog provides overall and mounting dimensions, including ΦD, R, L, L1, L2, L3, ΦD1, ΦD2 and Φ, to assist with selection and piping layout. Suitable for factory automation equipment, pneumatic fixtures and cylinder piping.

PXT-G Series Y-Type Threaded Five-Way Fitting

PXT-G Series Y-Type Threaded Five-Way Fitting

The PXT-G series Y-type threaded five-way fitting (G-thread type) is a pneumatic or fluid line connector with a Y-shaped flow passage. It connects to equipment ports using G threads (M5, M6, R1/8, R1/4, R3/8, R1/2). The series accommodates three tube diameters, ΦD 4, 6, and 8 mm, and is available with various port diameters (ΦD1 11.5~26.5 mm) and overall dimensions φ (10~20 mm). Key dimensions include L1 (3.5~13.5 mm), L2 (20~35 mm), and L3 (12.2~34 mm), allowing selection according to available installation space. PXT04-Gnn model codes distinguish the different tube diameter and thread combinations. There are 27 standard configurations for quick tubing connections in automated equipment, pneumatic actuators, and fluid circuits.

PL New Threaded Elbow

PL New Threaded Elbow

The PL series new threaded elbow (45-degree elbow) changes the direction of airflow in pneumatic lines. It uses G threads (G1/8, G1/4, G3/8, G1/2) and is compatible with tubing outside diameters of Φ4, Φ6, Φ8, Φ10 and Φ12. The product model consists of the base model PL45, a tube diameter code and a thread code. For example, PL45-04-G01 denotes a Φ4 tube diameter and a G1/8 thread. Key dimensions include L1, L2, L3, L4, ΦD1 and ΦD2; see the specification table for values. Suitable for automation equipment, pneumatic control systems and similar applications.

SFU Ball Screw Assemblies

SFU Ball Screw Assemblies

SFU series ball screw assemblies comply with DIN 69051 Form B and feature a single-nut design, high rigidity, high load capacity, and excellent transmission accuracy. Available in diameters of 12–100 mm and leads of 4–20 mm, with options for 3, 4, or 6 ball circuits to suit different load and travel requirements. Typical applications include CNC machine tools, automation equipment, and precision positioning systems.

PL-G Series New Threaded Fittings with G Threads

PL-G Series New Threaded Fittings with G Threads

PL-G series new threaded fittings with G threads provide threaded connections for pneumatic or fluid lines and are available in two body sizes: ΦD 4 mm and ΦD 6 mm. PL04 models cover G1/8, G1/4, and G3/8 threads, while PL06 models cover G1/8, G1/4, G3/8, and G1/2 threads. Multiple combinations of L1, L2, and L3 lengths and ΦD1 and ΦD2 dimensions accommodate different installation spaces and tubing requirements. Models are listed by code in the catalog; select the appropriate model by matching the thread size, body outside diameter, and overall dimensions.

PX Series Y-Type Threaded Tee

PX Series Y-Type Threaded Tee

PX series Y-type threaded tees split or combine flow in pneumatic piping. Their Y-shaped design features a male threaded connection and accommodates various tubing diameters and thread sizes. The catalog covers the PX04, PX06, PX08, PX10 and PX12 series, with thread options including M5, M6, R1/8, R1/4, R3/8 and R1/2. It also lists overall and installation dimensions such as ΦD, L1, L2, L3, L4, ΦD1, ΦD2 and φ to help select the right fitting for available space and connection requirements.

PKD Series Threaded Five-Way Fittings

PKD Series Threaded Five-Way Fittings

PKD series threaded five-way fittings distribute air from one inlet to multiple outlets in pneumatic lines and are suitable for tubing with outer diameters of Φ4 and Φ6. Available in 9 standard models, they feature M5 metric threads or R1/8, R1/4, R3/8, and R1/2 tapered pipe threads. Body dimensions include ΦD3 66~76.5 mm, ΦD4 42 mm, heights H1 22/26 mm and H2 13/14.5 mm, and lengths L1 3.2 mm, L2 19/20.5 mm, L3 9 mm, and L4 10 mm. To select a model, first choose size 04 or 06 according to the tubing outer diameter, then select connection code M5 or 01~04 according to the thread.

PY Series Plastic Pneumatic Tube Fittings

PY Series Plastic Pneumatic Tube Fittings

The PY series is a family of pneumatic tube fittings with engineering plastic bodies, designed for quick tube-to-tube and tube-to-thread connections and branching in compressed air lines. The range includes push-in fittings such as PY plastic Y-unions, plastic reducing unions and plastic elbows, as well as PKD threaded five-way fittings for multi-line collection or distribution. Fittings are sized by the outside diameter of the tube, commonly Φ4 or Φ6. Thread options include M5 metric female threads and R1/8, R1/4, R3/8 and R1/2 tapered pipe threads, which can be screwed directly into ports on pneumatic components such as cylinders, solenoid valves and filters. The fittings lock on insertion without tools, are easy to remove, offer low flow resistance and provide stable pressure resistance and sealing. They are suitable for clean, dry compressed air lines in automation equipment, packaging machinery, electronics assembly lines and similar applications. Select the main model by tube outside diameter (PKD04 corresponds to Φ4, PKD06 to Φ6), and select the thread size code to match the port on the connected component.

PE Series Plastic Union Tee

PE Series Plastic Union Tee

The PE series plastic union tee is a push-to-connect pneumatic fitting that joins two aligned air tubes with a branch tube. It is commonly used to distribute air in automated equipment. The injection-molded engineering plastic body (nylon/polyoxymethylene) is lightweight, corrosion-resistant and electrically insulating, and is suitable for non-corrosive fluids such as air and water. Seven basic sizes, PE04 through PE16, accommodate tube outside diameters of Φ4~Φ16 mm. Body outside diameter ΦD2 ranges from 11.5 mm to 26.5 mm, overall length L1 from 38~64 mm, socket depth L2 from 14~32 mm, and socket outside diameter ΦD3 from 3.2~4.3 mm. Reducing combinations such as PE16-04-06 are also listed for connecting tubes of different diameters. Together with the PM bulkhead union, PLM bulkhead male elbow and PZ plastic union cross from the same series, these fittings form a complete plastic push-to-connect system. For installation, push the tube fully into the fitting; internal gripping claws and an O-ring secure and seal it. No tools are required, and the fitting can be disconnected and reconnected repeatedly.

PM Series Straight Bulkhead Union

PM Series Straight Bulkhead Union

The PM series straight bulkhead union is a plastic push-to-connect pneumatic fitting used to secure and connect tubing through panels, partitions, or enclosure walls. The fitting body passes through a mounting hole and is secured to the panel with a locknut. Tubing pushes directly into the fittings at both ends for quick installation and removal. It is commonly used for through-panel pneumatic connections between cylinders, solenoid valves, air preparation components, and tubing circuits. The series comprises five models based on compatible tubing outside diameter: PM04, PM06, PM08, PM10, and PM12, with corresponding ΦD values of 4, 6, 8, 10, and 12 mm. The catalog table also specifies ΦD1 (outside diameter of the through-panel/threaded section) and overall and mounting dimensions such as L, L1, L2, M, and φ, making it easier to select a fitting based on panel thickness and mounting hole diameter. The same catalog page also lists related plastic push-to-connect fittings, including PLM bulkhead threaded fittings, PZ plastic four-way fittings, and PE plastic equal tees. These are separate series; the PM series covers only straight bulkhead unions. Selection is primarily based on three parameters: tubing outside diameter ΦD, mounting hole size, and bulkhead thread specification.

PLM Series Bulkhead Union Fittings

PLM Series Bulkhead Union Fittings

The PLM series bulkhead union is a plastic push-in fitting for connecting pneumatic tubing through a panel. It is suitable for tubing with an outside diameter of 4mm to 12mm. Made from engineering plastic, these fittings are corrosion-resistant, lightweight, and easy to install. Key dimensions include nominal diameter ΦD (4/6/8/10/12mm), outside diameters ΦD1 and ΦD2, overall length L, lengths L1 and L2, thread size M, and wrench flat size φ. They are suitable for panel mounting and tubing connections in automation equipment, pneumatic control systems, and similar applications.

PZ Series Plastic Four-Way Fittings

PZ Series Plastic Four-Way Fittings

The PZ series consists of plastic four-way (cross) fittings for distributing or combining air across four pneumatic lines. They can be used with other plastic pneumatic fittings in the same series, including PM bulkhead straight fittings, PLM bulkhead threaded fittings, and PE plastic equal tees. Sizes are specified by tube outside diameter: five metric sizes, ΦD 4, 6, 8, 10, and 12 mm, and five inch sizes, 5/32, 1/4, 5/16, 3/8, and 1/2, all in the same fitting design. Catalog dimensions include ΦD tube outside diameter, ΦD1 body outside diameter, ΦD2 bore diameter, L1 overall length, L2 center-to-end distance, and L3 branch length. As the tube outside diameter increases, the body outside diameter increases from 11.5 mm to 21.5 mm, the overall length from 38 mm to 59 mm, and the bore diameter from 3.2 mm to 4.3 mm. The fittings have plastic bodies and push-in connections, making them suitable for tubing and air distribution in general industrial pneumatic circuits.

PU Series Plastic Straight Union

PU Series Plastic Straight Union

The PU series plastic straight union is a push-in fitting commonly used in pneumatic lines to connect or extend plastic tubing. Models are classified by tube outside diameter, with sizes ranging from Φ4 to Φ332 mm. The table lists overall dimensions including ΦD, ΦD1, ΦD2, ΦD3 and total length L. The fitting has a lightweight plastic body and installs by simply inserting the tube. Body outside diameter and length vary by tube size, so check both the tube diameter and available installation space when selecting a model. Suitable for automation equipment, pneumatic control systems and general industrial piping.

PMF Series Female Threaded Straight Bulkhead Fitting

PMF Series Female Threaded Straight Bulkhead Fitting

The PMF series female threaded straight bulkhead fitting secures and connects pneumatic tubing as it passes through a panel or partition. One end has an Rc female tapered pipe thread, while the other has an M-threaded bulkhead mounting section. A locknut secures the fitting to a control cabinet, enclosure, or cylinder partition. It accommodates tubing with an outside diameter of Φ4~Φ12 mm. Rc thread sizes include Rc1/8, Rc1/4, Rc3/8, and Rc1/2, while bulkhead mounting thread sizes include M12×1, M14×1, M16×1, M20×1, and M22×1. Overall length L1 is 24~37 mm, and mounting outside diameter ΦD1 is 14~24 mm. The fittings are typically made of nickel-plated brass with nitrile rubber seals. They resist pressure and vibration, are easy to install and remove, and are widely used for through-panel pneumatic connections in pneumatic control systems, automation equipment, and electronic equipment.