Pneumatic Fittings — Page 2

APL-N Series Plastic Push-in Fittings
Plastic Push-in Fittings

KCE Series Female-Threaded Bulkhead Fittings
KCE series female-threaded bulkhead fittings are KC series pneumatic push-in fittings designed to connect tubing through a panel or equipment wall. They have a female-threaded port at one end and a push-in tubing port at the other, and are secured to the panel with a locknut. They prevent air from flowing out of the fitting when the tubing is disconnected. The body is made primarily of steel with an ultra-hard surface treatment and does not release copper ions, making it suitable for clean environments sensitive to copper ions. The maximum operating pressure is 1.0MPa. The fittings are suitable for nylon and PU tubing and come standard with compression sealant. KC series products must be used with KCR tube insert fittings. Common applicable tube O.D. sizes range from φ4 to φ12mm, with thread sizes including M5×0.8, 1/8, 1/4, 3/8 and 1/2.

PX-N Series Y-Type Threaded Tee - NTP Thread

KCR Series Tube Insert Fittings
KN-PLF Series All-Brass Female Threaded Elbow Fitting

BXG-PY Series Stainless Steel Y-Tee

PL45 Series 45-Degree Threaded Elbow

KQ2R Series Reducing Plug Connectors
Release ring color options: gray, blue, or black. Plastic body color options: gray or black.

BXG-PCF Series Straight Female Thread Fitting

PKD-G Series Threaded Five-Way Fitting - G Thread

PHT(2) Series Inline Right Angle (2)

TO-PLL-G Series Extended Male Threaded Elbow Fitting

PHT-G(3) Series In-Line Elbow (3) - G Thread

BXG-PC Series Straight Connector
BXG Series Stainless Steel Push-in Fittings.

TO-PU Series Straight Connector

PYG Series Reducing Fitting
KN-SQ-G Series All-Brass Inline One-Way Flow Control Valve

APC Series Plastic Push-to-Connect Fittings
APC series plastic push-to-connect fittings (one-touch tube fittings) provide quick connections for PU and nylon tubing in pneumatic systems. The tubing direction can be freely adjusted even after installation. The fittings feature nickel-plated brass and polybutylene terephthalate (PBT) plastic bodies for resistance to corrosion and contamination. All R and NPT threads are pre-coated with sealant, while straight threads come standard with an O-ring seal. Suitable for air and vacuum, they have an operating pressure range of 0~1.0 MPa (150 psi), a vacuum pressure of -100 kPa, a proof pressure of 1.5 MPa, and an operating temperature range of 0~60℃. Tube sizes range from APC04~APC16, with M5, M6, R1/8, R1/4, R3/8, and R1/2 threaded connections, as well as G parallel thread versions.

APOC/APCF Series Plastic Push-in Fittings
The APOC/APCF series comprises engineering-plastic push-in pneumatic fittings for quick connection and disconnection of nylon and PU tubing to pneumatic components such as cylinders, solenoid valves, and air preparation units. APOC is a male straight fitting (including an internal hex male straight version), while APCF is a male socket fitting with two subseries: APCF-G (G parallel pipe thread) and APCF-N (NPT American tapered pipe thread). Tube sizes cover 4, 6, 8, 10, 12, 14, and 16 mm and 5/32, 1/4, 5/16, 3/8, and 1/2 inch; thread sizes include M5, M6, R1/8~R1/2, G1/8~G1/2, and NPT1/8~NPT1/2. The body is made from engineering plastics such as POM or nylon, with nitrile rubber (NBR) seals. The fittings are suitable for compressed air, vacuum, and some water or liquid lines, with an operating pressure of approximately 0~1.0 MPa and a temperature range of approximately -20~+60 ℃. The catalog lists outline and mounting dimensions for each model, including D (tube outside diameter), R (thread size), A, B, P, S, and X, to assist with selection and piping design.

APCF Series Plastic Push-in Fittings
APCF series plastic push-in fittings quickly connect pneumatic tubing to threaded ports. Their bodies are made of engineering plastics such as nylon or polyoxymethylene, with metal or plastic threads, and are suitable for media such as compressed air and water. They are available in three thread types: APCF (R tapered pipe thread/BSPT), APCF-G (G parallel pipe thread/BSPP), and APCF-N (NPT American tapered pipe thread). They accommodate tubing outside diameters of 4/6/8/10/12mm and 5/32, 1/4, 5/16, 3/8, and 1/2 inches. Key installation dimensions include A (threaded end length), B (overall length), S (width across flats), and X (tube insertion dimension). Both metric and imperial versions are available. Simply push the tubing into the fitting to seal and lock it in place. Easy to install and remove, these fittings are widely used for quick tubing connections in automation equipment, pneumatic components, and piping systems.

APMF Series Plastic Push-in Fittings
The APMF series consists of straight male-threaded plastic push-in fittings for quickly connecting and disconnecting nylon or PU tubing and female-threaded ports in compressed air lines. One end has a push-in collet for tubing with an outside diameter of 4, 6, 8, 10 or 12mm, with imperial sizes of 5/32" and 1/4". The other end has a straight male-threaded connection, available in three thread standards: R1/8~R1/2 (BSPT), G1/8~G1/2 (BSPP), and NPT1/8~NPT1/2, identified by no suffix, a G suffix, and an N suffix, respectively. For each tube diameter and thread size, the catalog lists dimensions including D (applicable tube outside diameter), R/G/NPT (connection thread), M (fitting body thread), A (width across flats), B1 (overall length), B2 (threaded section length), and S1/S2 (hex widths across flats), making it easier to select a fitting for the available installation space and line diameter. For the same tube diameter, the 01/02/03/04 codes correspond to different thread sizes. Check both the thread standard and tube diameter when selecting a model.

APL Series Plastic Push-to-Connect Fittings
The APL series consists of plastic male elbow push-to-connect fittings (90° fittings) for right-angle connections between tubing and female threaded ports in pneumatic systems. The fitting body is injection-molded from engineering plastic. The push-to-connect side locks the tubing in place upon insertion and releases it when the release ring is pressed, allowing efficient, tool-free assembly. The male threaded side screws directly into an actuator or valve manifold. Four tubing outside diameters are available: 4, 6, 8, and 10 mm. Thread options include M5 and M6 metric fine threads and four pipe thread codes, 01~04, to accommodate ports on miniature cylinders, solenoid valves, pneumatic grippers, and other devices. These fittings are widely used in pneumatic control circuits in automation equipment, packaging machinery, and electronics assembly lines. Select a model based on the tubing outside diameter and mating thread specification.

APLL/APLF Series Plastic Push-in Fittings
APLL/APLF series plastic push-in fittings quickly connect nylon and polyurethane tubing to threaded ports in pneumatic systems. Tubing can be inserted and removed without tools; simply press the release ring to disconnect it. The fittings are available in a range of tube diameters and thread sizes: metric tube diameters of 4, 6, 8, 10, and 12 mm, and imperial tube diameters of 5/32, 1/4, 5/16, 3/8, and 1/2. Thread types include M5 and M6 metric threads, R1/8~R1/2 tapered pipe threads, G1/8~G1/2 parallel threads (model suffix G), and NPT1/8~NPT1/2 American tapered pipe threads (model suffix N). The catalog lists D (tube diameter), R (thread), and A, B, C, S, and X overall and installation dimensions for each model, making it easy to check wrench clearance and tubing routing. The model code format is main model-tube diameter-thread specification, for example APLL06-01, APLF08-04G, and APLF1/4-02N.

APLF Series Plastic Push-in Fittings
The APLF series comprises straight male-threaded plastic push-in fittings, with a push-in tube connection at one end and an R, G or NPT male thread at the other. They can be screwed directly into threaded ports on cylinders, solenoid valves, air preparation units and other components. Supported tube outside diameters include metric Φ4, Φ6, Φ8, Φ10 and Φ12, and imperial 5/32″, 1/4″, 5/16″, 3/8″ and 1/2″. Each tube size corresponds to four thread sizes, 01~04 (R1/8~R1/2 and their G and NPT equivalents). The injection-molded engineering plastic body features a stainless steel retaining clip and rubber seal, allowing pneumatic tubing to be quickly connected, disconnected and reused without tools. The range comprises three subseries: APLF (R tapered pipe thread), APLF-G (G parallel pipe thread) and APLF-N (NPT American tapered pipe thread). They are widely used in automated production lines, packaging machinery, electronic equipment and pneumatic control circuits.

APB Series Plastic Push-in Fittings
APB series plastic push-in fittings enable quick connection and disconnection of tubing in pneumatic lines. They accommodate tube diameters of 4, 5/32, 6, 8, 10, 12, 14, and 16, with threaded ports ranging from M5 and M6 to R1/8~R1/2, G1/8~G1/2, and NPT1/8~NPT1/2. The range consists primarily of straight fittings. Model suffixes 01/02/03/04 generally correspond to different thread sizes; the G suffix denotes a G thread, and the N suffix denotes an NPT thread. The catalog provides overall and installation dimensions, including D, R, A, B, C, S, and X, to facilitate fitting selection and pneumatic line layout.

APD Series Plastic Push-to-Connect Fittings
APD series plastic push-to-connect fittings are straight pneumatic fittings for quickly connecting tubing to female or male threaded ports in pneumatic lines. The tubing locks and seals automatically when fully inserted; press the release ring to remove it. No tools are required, making assembly and maintenance easy. The fitting body is made of engineering plastic and accommodates PU or nylon tubing with an outer diameter of 4, 6, 8, or 10 mm. Thread options include M5 and M6 metric fine threads and R1/8, R1/4, R3/8, and R1/2 tapered pipe threads. Multiple thread sizes are available for each tube diameter to suit different flow rates and installation spaces. The catalog lists D (tube outer diameter), R (thread size), and A, B, C, S, and X dimensions for each model. B is the overall length, S is the width across flats, and X is the outer diameter of the insertion end, making it easy to plan tubing layouts and check clearances.

APX Series Plastic Push-to-Connect Fittings
APX series plastic push-to-connect fittings are straight fittings for pneumatic lines, compatible with plastic air tubing with outside diameters of 4, 6, 8, 10, and 12 mm or 5/32, 1/4, 5/16, 3/8, and 1/2 inches. The series comprises three subseries by thread type: APX (M5, M6, R1/8~R1/2), APX-G (G1/8~G1/2), and APX-N (NPT1/8~NPT1/2). Model numbers indicate both tube diameter and thread specification. The catalog provides D, R, A, B, S, X, and other overall and mounting dimensions to aid product selection and tubing layout. Push-to-connect installation simplifies pneumatic circuit assembly and maintenance. These fittings are widely used in automated equipment, pneumatic fixtures, packaging machinery, and general industrial pneumatic systems.

APH Series Plastic Push-to-Connect Fittings
APH series plastic push-to-connect fittings (one-touch pneumatic fittings) provide quick, tool-free connection and disconnection between pneumatic tubing and threaded ports. They are widely used in pneumatic control systems and automated equipment. The engineering plastic body is lightweight and corrosion-resistant. Thread options include M metric, R/Rc tapered sealing, G parallel pipe, and NPT American tapered threads, compatible with ΦD 4/6/8/10/12mm tubing. The catalog provides complete external dimensions, including ΦD tube diameter, R thread specification, L1~L4 lengths, ΦD1 diameter, and S width across flats, to simplify selection and installation. Model numbers begin with APH, followed by tube diameter and thread specification codes. The G suffix denotes a G parallel pipe thread.

APHF Series Plastic Push-in Fittings
APHF series plastic push-in fittings are made of high-quality engineering plastic and are corrosion-resistant, lightweight, and easy to install. They provide quick connections between tubing and threaded ports in pneumatic systems and are widely used in automation equipment, pneumatic tools, packaging machinery, and other applications. The series is available for multiple tube outer diameters (Φ4, Φ6, Φ8, Φ10, Φ12 and imperial sizes 5/32, 3/16, 1/4, 5/16, 3/8, 1/2) and thread types (M5, R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, G1/2, NPT1/8, NPT1/4, NPT3/8, NPT1/2) to meet different pneumatic circuit connection requirements. The fittings have a compact design and reliable seals, with a typical operating pressure range of 0~1.0 MPa and an operating temperature range of 0~60℃.

APHT Series Plastic Push-in Fittings
The plastic push-in fitting range includes APHT, APHT-G, APKB, APKB-G, APKD and APKD-G types for quick connection and branching of nylon and polyurethane tubing in pneumatic systems. APHT push-in straight and branch fittings have PT(R) or G threads and accommodate ΦD 4/6/8/10/12mm air tubing. Thread sizes range from PT1/8~PT1/2 and G1/8~G1/2. The table lists L1~L6 lengths, ΦD1 outside diameter and S hex across-flats dimensions. APKB/APKD series fittings are cartridge-type push-in fittings, with installation dimensions including L, A, B, C, ΦD, Φd, H, G/R threads and X1/X2. Made from engineering plastic, the fittings are easy to install and remove without tools and are suitable for pneumatic lines in automated equipment.

APHT-G Series Plastic Push-in Fittings
The APHT-G series consists of straight male-threaded plastic push-in fittings commonly used for quick connections in pneumatic systems. One end accepts nylon or PU tubing of the corresponding outside diameter for quick, tool-free installation and removal. The other end has a G-series (BSPP parallel) male thread for connection to a threaded port. The series accommodates five tube outside diameters, ΦD 4, 6, 8, 10 and 12 mm, and four port thread sizes, G1/8, G1/4, G3/8 and G1/2. Key dimensions include tube outside diameter ΦD, port thread G, lengths L1~L6, fitting diameter ΦD1 and width across flats S. Models follow the naming format APHT+tube diameter code-port number(3)G. For example, APHT06-02(3)G denotes a Φ6 tube and a G1/4 port. These fittings are similar in appearance to the related APHT series (PT/R tapered threads), but differ in thread type. They are suitable for connecting tubing to pneumatic actuators, cylinders and solenoid valves.

APKB Series Plastic Push-to-Connect Fittings
APKB series plastic push-to-connect fittings are available in two variants: APKB with R threads and APKB-G with G threads. They provide quick tubing connections in pneumatic systems. Made from high-quality plastic, they offer easy installation, reliable sealing, and corrosion resistance. Compatible tube outside diameters ΦD are 4, 6, and 8 mm, with thread sizes including R1/8, R1/4, R3/8, G1/8, and G1/4. The typical operating pressure is 0~1.0 MPa and the operating temperature is 0~60°C. They are widely used in automation equipment, pneumatic control cabinets, and other applications.

APKB-G Series Plastic Push-In Fittings
The APKB-G series consists of plastic push-in fittings for pneumatic lines. They feature an engineering plastic body and a metal threaded section. Tubing locks in place when inserted and can be removed by pressing the release ring. The fittings provide quick connections and branches for air lines, including vacuum lines. Available sizes accommodate tubing outer diameters ΦD of 4, 6, 8, 10 and 12 mm. Threaded ends are available with G (BSPP parallel pipe thread) or R/PT (tapered pipe thread). Within the same family, APKB models have R threads and APKB-G models have G threads; other configurations include APHT and APKD. Selection parameters in the catalog include ΦD (tube diameter), Φd (bore diameter), G/R thread size and dimensions L, A, B, C, H, X1 and X2. Select the part number using the combination of tubing outer diameter and thread size. To install, insert the tubing fully and screw the threaded end into the matching female port. These fittings are suitable for quick pneumatic piping in automated equipment, fixtures and packaging machinery.

APKD Series Plastic Push-to-Connect Fittings
APKD series plastic push-to-connect fittings provide quick connections for pneumatic tubing. Their bodies are made of engineering plastic (PBT or nylon) and fitted with slotted stainless steel or brass sleeves, allowing PU and PA tubing to be quickly connected and disconnected. They accommodate tube outer diameters of Φ4, Φ6, Φ8, and Φ10 mm and thread sizes G1/8, G1/4, G3/8, and G1/2 (codes 01~04). Reducing versions are also available (such as Φ6-Φ4, Φ8-Φ6, and Φ10-Φ8). Operating pressure is 0~1.0 MPa, vacuum pressure is -100 kPa, operating temperature is 0~60°C, and the working medium is compressed air. Easy to install, reliably sealed, and reusable, these fittings are widely used for tubing connections in automated equipment, pneumatic control cabinets, and industrial robot end effectors.

APKD-G Series Plastic Push-In Fittings
The APKD-G series consists of plastic push-in fittings with G threaded connections for quick connection and disconnection of tubing in pneumatic lines. Models accommodate tube diameters including ΦD 6/8/10 mm, with thread sizes G1/8 and G1/4. Dimensions include L, A, B, C, ΦD, Φd, H, X1 and X2. Easy to install, these fittings are suitable for automation equipment, pneumatic control systems and general industrial piping. See the individual model tables for dimensions, and confirm the tube diameter, thread size and available installation space when selecting a model.

APU/APV/APE Series Plastic Push-to-Connect Fittings
This series of plastic push-to-connect fittings includes APU, APV and APE configurations for quickly connecting and disconnecting nylon, polyurethane and other pneumatic tubing. The range accommodates metric and imperial tube diameters, with metric sizes from 4 mm to 16 mm and imperial sizes including 5/32, 1/4, 5/16, 3/8 and 1/2 inches. The catalog provides overall and installation dimensions such as D, A/E, d and X to assist with selection and piping design. The push-to-connect design is easy to install and allows repeated connection and disconnection. These fittings are suitable for tubing connections in automation equipment, pneumatic control circuits and various pneumatic actuators.

APY Series Plastic Push-to-Connect Fittings
APY series plastic push-to-connect fittings allow hoses in compressed air lines to be connected and disconnected quickly. They lock on insertion and are easy to remove. The catalog lists 7 sizes from APY04~APY16 for tube diameters D=4~16 mm, along with dimensions A, d and X to help with selection and installation space checks. The fittings have plastic bodies and are suitable for automation equipment, pneumatic control systems and general industrial air lines.

APK Series Plastic Push-in Fittings
APK series plastic push-in fittings provide quick connections between tubing and components in pneumatic systems. Their engineering plastic bodies and O-ring seals allow tool-free connection and disconnection with reliable sealing. The series includes metric straight APK fittings, imperial straight APKG fittings, and variants such as APP and APPG(APPK). They accommodate tubing outside diameters of 4, 6, 8, 10, and 12 mm, as well as 5/32, 1/4, 5/16, 3/8, and 1/2 inch. Key dimensions include tube outside diameter D, body length B, bore diameter d, and mounting dimensions F, E, and X, which increase with fitting size. These fittings are widely used to connect tubing in automation equipment, pneumatic actuators, sensor air lines, and other applications.

APKG Series Plastic Push-in Fittings
Plastic push-in fittings allow quick connection and disconnection of nylon and polyurethane tubing in pneumatic systems. The tube locks in place when inserted and can be removed by pressing the release ring, with no tools required. They are widely used in automation equipment, pneumatic fixtures, packaging machinery, and electronics assembly lines. This series is available in both metric and imperial (inch) sizes: APY is a straight type for tube outside diameters of 4–16mm; APK is an extended straight type for 4–12mm; APP is a branch type for 4–12mm; and APKG and APPG are imperial series covering 5/32–1/2 inches. Key dimensions include tube outside diameter D, overall length B, bore diameter d, mounting/thread dimensions F and E, and insertion positioning dimension X. The body is made of engineering plastic, the seals are nitrile rubber, and the fittings are suitable for compressed air.

APP Series Plastic Push-in Fittings
APP series plastic push-in fittings are nylon fittings for quickly connecting and disconnecting tubing to threaded ports or other tubing in pneumatic systems. The products are available in metric and imperial tube sizes: metric models use APP followed by the tube diameter, with sizes of 4, 6, 8, 10, and 12 mm; imperial models use APPK followed by the fractional inch size, with sizes of 5/32, 1/4, 5/16, 3/8, and 1/2 inch. The catalog lists external and installation dimensions for each size using D (compatible tube outside diameter), B (overall length), d (through-hole/bore), F, E, X, and other dimensions, making it easier to check insertion depth and installation space when selecting a fitting. The plastic fitting body uses a push-in locking mechanism that requires no tools for assembly: the air tube is inserted directly and held by a self-locking collet to provide a seal. These fittings are widely used in compressed-air circuits in automation equipment, packaging machinery, and electronics assembly lines. The same catalog page also lists plastic push-in fittings in different configurations, such as APY, APK, and APKG (straight, elbow, tee, and others). Select the specific model by combining the configuration code with the tube diameter.

AP Series Plastic Push-in Fittings
Plastic push-in fittings provide quick connections for compressed air lines. Their one-touch design seals and locks the tubing upon insertion; pressing the release ring allows it to be removed without tools. The range includes APY straight, APK elbow, APKG imperial elbow, APP branch/T, and APPG imperial branch fittings. Metric sizes cover tube diameters D4~D16, while imperial sizes range from 5/32″~1/2″. The fitting bodies are made of engineering plastic (nylon/POM), and internal O-rings ensure an airtight seal. Key specifications include tube diameter D, external dimensions A/B/E/F/X, and bore diameter d. They are suitable for automation equipment, pneumatic control systems, and similar applications.

APGJ Series Plastic Push-in Fittings
Plastic push-in fittings are basic components used for quick connection and disconnection of tubing in pneumatic systems. Their bodies are made of engineering plastic, commonly in a composite construction of nylon and nickel-plated brass. Tubing can be inserted and removed without tools, while built-in resilient gripping claws and O-ring seals ensure airtight connections. The series includes APGJ straight and reducing fittings and APLM and APLN straight threaded fittings. APGJ models use the code “APGJ-size-tube diameter” and accommodate tube diameters of 4~20mm, with larger sizes extending to 356. Dimensions specified include the ΦD1 bore, overall length, B, C1, C2 and X. APLM/APLN are straight fittings with male threads (M12~M27), with dimensions L, A, B, C, ΦD, Φd, M, H and X specified. They connect Φ4~Φ16 pneumatic tubing to M12~M27 threaded ports. These products are widely used in automation equipment, pneumatic actuators, and vacuum and compressed air piping systems.

APLM Series Plastic Push-in Fittings
APLM series plastic push-in fittings are straight pneumatic fittings designed for quick connection and disconnection of nylon or polyurethane tubing to pneumatic components with female threads. The injection-molded engineering plastic body contains a stainless steel retaining clip and a rubber seal. The tubing locks and seals automatically upon insertion, allowing tool-free installation and removal for applications requiring frequent tubing changes. The range covers six tube diameters: Φ4, Φ6, Φ8, Φ10, Φ12 and Φ16, with corresponding male threads M12, M14, M16, M20, M22 and M27. Hex widths across flats range from 14~29mm, overall lengths from 33.3~62.6mm, and insertion depths X from 9.9~23.9mm. The same catalog also includes related fittings such as APLN (with a different thread type) and APGJ, whose body dimensions are essentially the same as those of this series. Select fittings according to thread type and tube size.

APLN Series Plastic Push-in Fittings
The APLN series consists of plastic push-in pneumatic fittings for quickly connecting tubing to female-threaded components in compressed air lines. The fitting body is made of engineering plastic, commonly in a nylon and nickel-plated brass composite construction. PU/PA tubing can be inserted directly into the push-in fitting to form a seal without tools, making installation and removal easy. The series is available in 6 sizes: tube outside diameters ΦD of 4, 6, 8, 10, 12, and 16 mm, with corresponding male threads M12, M14, M16, M20, M22, and M27. Overall length L ranges from 33.3 mm to 62.6 mm, width across flats H from 14~29 mm, and insertion-end bore Φd is 3.3 mm or 4.3 mm. Select the model from the reference table according to the tube outside diameter and mounting thread size. These fittings are suitable for pneumatic lines in automation equipment, pneumatic fixtures, packaging machinery, and similar applications.

APXG Series Plastic Push-to-Connect Fittings
Plastic push-to-connect fittings (one-touch pneumatic fittings) provide quick connections and branching for compressed air lines. Simply insert the tubing to lock it in place, and press the release ring to remove it. They are widely used in automated equipment, jigs and fixtures, and pneumatic actuator piping. This page covers the APXG straight, APL45 elbow, APXT/APPT tee, and APPF subseries, among others. They accommodate tubing with a ΦD outer diameter of 4, 6, 7, 8, 10, or 12 mm. Threaded ends are available with M5 and M6 metric threads and R1/8, R1/4, R3/8, R1/2, G1/8, G1/4, G3/8, and G1/2 pipe threads. Models are also offered in a range of dimensions, including L1~L4, ΦD1, ΦD2, and width across flats. Within each subseries, different tube diameter and thread combinations correspond to different part numbers. Select a fitting based on the tube outer diameter and connection thread.

APXT Series Plastic Push-in Fittings
APXT series plastic push-in fittings provide quick connections for pneumatic lines. Their bodies are made of engineering plastic, and they are suitable for nylon or polyurethane tubing with outside diameters of Φ4, Φ6, or Φ8. Thread options include R1/8, R1/4, R3/8, R1/2, G1/8, G3/8, and G1/2, accommodating connections to various lines and actuators. The fittings lock on insertion, are easy to disconnect, and provide a reliable seal. They are widely used in automation equipment, pneumatic control cabinets, and packaging machinery. Select the model according to the tube outside diameter and thread specification. The typical operating pressure is 0~1.0 MPa, and the operating temperature is approximately -20~60℃.

APPT Series Plastic Push-In Fittings
APPT series plastic push-in fittings provide quick connections for nylon, polyurethane and other tubing in pneumatic lines. Tubing locks in place when inserted and is easy to remove. The series accommodates three tube outside diameters: 4, 6 and 8 mm. Thread sizes include R1/8, R1/4, R1/2, G1/8, G3/8 and G1/2. These fittings are suitable for automation equipment, pneumatic control cabinets and general pneumatic piping. The catalog provides dimensions including L3, ΦD1, ΦD2, L, L1, L2 and φ to facilitate selection and installation.

AP Series Plastic Push-to-Connect Fittings
Plastic push-to-connect fittings (pneumatic push-in tube fittings) provide quick connections between polyurethane or nylon air tubing in sizes such as Φ4, Φ6, Φ8 and Φ12 and M5 or M6 metric threads or R1/8~R1/2 and G1/8~G1/2 pipe threads. The body is made of engineering plastic, with a brass or engineering plastic retaining clip. The push-in design allows tubing to be installed and removed without tools. These fittings are widely used in pneumatic circuits, automation equipment, packaging machinery and electronic assembly lines. The catalog groups fittings by shape and connection type into sub-series including APL45 (elbow), APXG (male-threaded straight), APXT (male-threaded tee), APPT (branch tee) and APPF (straight). Key specifications include compatible tube outside diameter ΦD, thread size R or G, insertion depth, overall length L, outside swing dimensions ΦD1~ΦD4, width across flats φ and segment lengths L1~L4. Select the fitting to match the tube outside diameter and mating thread size. Operating pressure, temperature resistance and media compatibility are governed by general pneumatic fitting specifications.