Pneumatic Components — Page 6

SCA Series Throttle Valve

SCA Series Throttle Valve

JCQ Series Compact Cylinder

JCQ Series Compact Cylinder

BXG-PLF Series Stainless Steel Female Threaded Elbow

BXG-PLF Series Stainless Steel Female Threaded Elbow

BXG-POC Series Cylindrical Hex Socket Connector

BXG-POC Series Cylindrical Hex Socket Connector

CPOC Series Round-Thread Straight Connector

CPOC Series Round-Thread Straight Connector

Round-Thread Straight Connector

PED Series T-Type Side-Threaded Tee

QGA(B) Series Standard Cylinders

QGA(B) Series Standard Cylinders

This cylinder series has bore sizes from Φ32 to Φ400 and includes QGA non-cushioned cylinders and QGB cushioned cylinders. Cylinders from Φ32 to Φ100 use high-quality aluminum alloy barrels, while those from Φ125 to Φ400 use precision-ground steel barrels. The cylinder end caps are die-cast, and the piston rod surfaces are roller-hardened, hard chrome-plated, and precision-ground. The seals operate normally without an oil supply.

MPT Series Air-Hydraulic Booster Cylinder

MPT Series Air-Hydraulic Booster Cylinder

APL-N Series Plastic Push-in Fittings

APL-N Series Plastic Push-in Fittings

Plastic Push-in Fittings

MHZ2 Series Pneumatic Gripper

MHZ2 Series Pneumatic Gripper

MHZ2 Series Pneumatic Gripper; MHZ2 is a parallel-opening/closing type.

MAL Series Aluminum Alloy Mini Cylinder

MAL Series Aluminum Alloy Mini Cylinder

The title reads “MAL Series Aluminum Alloy Mini Cylinder,” and the English label reads “MAL Series slim cylinder”.

QE Series Quick Exhaust Valve

QE Series Quick Exhaust Valve

KCE Series Female-Threaded Bulkhead Fittings

KCE Series Female-Threaded Bulkhead Fittings

KCE series female-threaded bulkhead fittings are KC series pneumatic push-in fittings designed to connect tubing through a panel or equipment wall. They have a female-threaded port at one end and a push-in tubing port at the other, and are secured to the panel with a locknut. They prevent air from flowing out of the fitting when the tubing is disconnected. The body is made primarily of steel with an ultra-hard surface treatment and does not release copper ions, making it suitable for clean environments sensitive to copper ions. The maximum operating pressure is 1.0MPa. The fittings are suitable for nylon and PU tubing and come standard with compression sealant. KC series products must be used with KCR tube insert fittings. Common applicable tube O.D. sizes range from φ4 to φ12mm, with thread sizes including M5×0.8, 1/8, 1/4, 3/8 and 1/2.

HAD402 Series Automatic Drain

HAD402 Series Automatic Drain

When installing the drain hose, use a hose with an inner diameter of at least Φ10 mm and a length no greater than 5 m. Do not allow the hose to bend upward. The compressor power must be greater than 3.7 kW.

MCF-MM Series Solenoid Pulse Valve (Submerged Type)

Submerged type.

CQSB Series Compact Cylinder

CQSB Series Compact Cylinder

CQSB Series compact cylinder

MXS Series Pneumatic Slide Table (Cross-Roller Guide)/Dual-Cylinder Type

MXS Series Pneumatic Slide Table (Cross-Roller Guide)/Dual-Cylinder Type

Cross-roller guide, dual-cylinder type.

PCF Series Female Thread Straight Fitting

080/090 Series Solenoid Valve Coils

080/090 Series Solenoid Valve Coils

Terminals fitted with DC coils have a polarity-sensitive indicator light. Connect “1” to the positive terminal and “2” to the negative terminal. If the connections are reversed, the indicator light will not illuminate, but the valve will still operate.

CJP Series Pin Cylinder (Single-Acting)

CJP Series Pin Cylinder (Single-Acting)

ZL112 Series Multi-Stage Vacuum Generators

The 3-stage diffuser increases suction flow by up to 250% and reduces air consumption by 20%. Available with a valve, vacuum gauge, or pressure switch. Includes a built-in vacuum filter and silencer. Can be mounted in three orientations (top, bottom, or side).

PX-N Series Y-Type Threaded Tee - NTP Thread

PX-N Series Y-Type Threaded Tee - NTP Thread

MY3B Series Mechanically Jointed Rodless Cylinders

MY3B Series Mechanically Jointed Rodless Cylinders

MSV Series Mechanical Valves

MSV Series Mechanical Valves

ACP Series Ultra-Thin Cylinder

ACP Series Ultra-Thin Cylinder

HNSD/HNTSD Series Hydraulic Swing Clamp Cylinder Arm Dimensions

The page title is “HNSD/HNTSD Series Hydraulic Swing Clamp Cylinder Arm Dimensions,” translated into English as “Hydraulic swing clamp cylinder arm dimensions.”

SDAW Series Ultra-Thin Cylinder

SDAW Series Ultra-Thin Cylinder

Dual-rod, double-acting, multi-position ultra-thin cylinder.

MSQ Series Rotary Table Gear-Type Rotary Actuator

MSQ Series Rotary Table Gear-Type Rotary Actuator

The page title is “MSQ Series Rotary Table Gear-Type Rotary Actuator.”

CPK Series Plastic Five-Way Fitting

CPK Series Plastic Five-Way Fitting

KCR Series Tube Insert Fittings

KCR Series Tube Insert Fittings

CJ1B Series Miniature Cylinder (Single-Acting)

CJ1B Series Miniature Cylinder (Single-Acting)

Single-acting, spring return.

PHW Series L-Shaped Threaded Swivel Tee

KN-PLF Series All-Brass Female Threaded Elbow Fitting

BXG-PY Series Stainless Steel Y-Tee

BXG-PY Series Stainless Steel Y-Tee

PL45 Series 45-Degree Threaded Elbow

PL45 Series 45-Degree Threaded Elbow

MRHQ Series Vane-Type Rotary Actuator

MRHQ Series Vane-Type Rotary Actuator

FRC Series Two-Piece Air Preparation Units

FRC Series Two-Piece Air Preparation Units

The working medium is compressed air. The unit may be pipe-mounted or bracket-mounted and must be installed vertically within ±5°.

KQ2R Series Reducing Plug Connectors

KQ2R Series Reducing Plug Connectors

Release ring color options: gray, blue, or black. Plastic body color options: gray or black.

CPH Series Hex Nipple

CPH Series Hex Nipple

PD Series Threaded Side Tee

PD Series Threaded Side Tee

WK Series Pneumatic Cylinder Locating Pin (Double-Acting)

The title identifies it as a pneumatic cylinder locating pin (double-acting).

CRA1 Series Rack-and-Pinion Rotary Actuator

CRA1 Series Rack-and-Pinion Rotary Actuator

BXG-PCF Series Straight Female Thread Fitting

BXG-PCF Series Straight Female Thread Fitting

K24/K34 Series Manual Rotary Valves (4-Port, 2-Position / 4-Port, 3-Position)

K24/K34 Series Manual Rotary Valves (4-Port, 2-Position / 4-Port, 3-Position)

Manual rotary valves available in 4-port, 2-position and 4-port, 3-position configurations.

PKD-G Series Threaded Five-Way Fitting - G Thread

PKD-G Series Threaded Five-Way Fitting - G Thread

K23JD Series Poppet Directional Control Valve (Wuxi Type)

K23JD Series Poppet Directional Control Valve (Wuxi Type)

2-position, 3-way pneumatic poppet directional control valve; Wuxi type.

D-C73 Series Magnetic Switches

D-C73 Series Magnetic Switches

D-C73 series magnetic switches, also known as magnetic proximity switches or cylinder position sensors, mount on the outside of a cylinder barrel and detect piston travel position by sensing the magnetic ring built into the piston. They are widely used for position detection in pneumatic actuators and in automation control circuits. These switches use non-contact magnetic sensing, eliminating mechanical wear and providing fast response. They can directly drive a PLC input or relay coil. An LED status indicator on the housing simplifies on-site setup and troubleshooting. The switches can be secured in the cylinder's T-slot using an M5 thread or a dedicated mounting clip. They fit cylinders with a range of bore sizes and are available with different wiring configurations and lead lengths to suit the application. The catalog gives YFSY-3120-M5-DC24V-G as an example ordering code, covering the brand, model code, thread size (M5), rated voltage (DC24V), and type (G). The same page also lists the D-A73, D-Z73, D-A93, and CS1-U/F/S/G magnetic switch series, which can be selected according to sensing method and wiring requirements.

MCF-FS Series Solenoid Pulse Valve (Flanged Type)

MCF-FS Series Solenoid Pulse Valve (Flanged Type)

The valve inlet uses a flange connection, while the outlet connects directly to the blowpipe with a slip fitting. Choose either an electrically controlled pulse valve with a solenoid pilot valve (CA) or a pneumatically controlled pulse valve without a pilot valve. The FS valve has a 90-degree right-angle inlet and outlet configuration, with the inlet larger than the outlet.