Pneumatic Components — Page 23

KJW Series Extended Male Thread Tube Fittings
KJW series extended male thread tube fittings are straight fittings for pneumatic lines. The male threaded end screws into an equipment or valve body port, while the other end connects to tubing approximately 3 mm in diameter. The extended design is useful in confined spaces or where a longer connection is needed. The catalog lists KJW03-M3, KJW03-M5, KJW03-M6, and KJW03-01S, with M3, M5, M6, and 1/8" threads respectively. Fitting outside diameters range from 3.1~7.5 mm, and fitting lengths range from 3.8~8 mm. Suitable for general fluid lines carrying air, water, and similar media, these fittings are easy to install, provide reliable sealing, and can be repeatedly disconnected and reconnected.

KJY Series Male Tee Fittings
The KJY series consists of male-threaded pneumatic push-in tee fittings for branching compressed air lines. One male-threaded end screws into an actuator or equipment port, while the other two ends connect to pneumatic tubing via push-in fittings. Suitable for PU, PA and other pneumatic tubing, they require no tools for installation and can be connected and disconnected repeatedly. Common sizes include M3, M5 and M6 metric threads and R1/8 and R1/4 pipe threads, for tubing with outside diameters of 3, 3.2, 4, 6, 8, 10 and 12 mm. The bodies are typically nickel-plated brass, with nitrile rubber seals. They are compact, offer high flow rates and resist corrosion. When selecting a fitting, confirm the thread size, tubing outside diameter and seal type. The OCR for this page retained only the series title; the model-specific dimension table is incomplete. Refer to the full catalog when selecting a fitting.

KJU Series U-Type Tee Fittings
KJU series U-type tee fittings are push-in pneumatic connectors used to split one air line into two branches in a U- or Y-shaped configuration. They support both equal-diameter and reducing connections. Suitable tube outside diameters are Φ4 and Φ6. Models are designated as KJU + tube diameter at one end + tube diameter at the other end. For example, KJU04-00 indicates Φ4 at both ends, KJU06-00 indicates Φ6 at both ends, KJU04-06 indicates Φ4 at one end and Φ6 at the other, and KJU06-04 indicates the reverse. The insertion ends have O-ring seals for quick, tool-free connection and disconnection and repeated use. Bodies are mostly made of engineering plastic, with some featuring metal threads. These fittings are suitable for distributing and branching air lines in automation equipment, pneumatic fixtures, small cylinders, and inspection devices. Select the model according to the tube outside diameter and branch configuration (equal-diameter or reducing). The working medium is purified, filtered compressed air. Do not exceed the fitting's permissible pressure and temperature ranges.

TWAS Series Male Straight Fittings
The TWAS series consists of male straight pneumatic fittings that provide a push-to-connect tubing connection at a threaded port. One end has a metric or imperial thread (M3×0.5, M5×0.8, or 1/8, 1/4, 3/8, or 1/2 imperial tapered pipe thread), while tubing is inserted directly into the other end. The body has an external hex for wrench tightening in confined spaces. The catalog distinguishes specifications using the format “base model-connection thread-tube outer diameter.” The model tables list TWAS1201F, TWAS1211F, TWAS2201F, and TWAS3201F separately, providing parameters such as connection thread size, threaded section dimensions A/A1 and H, hex width across flats S, and overall fitting length L. This makes it easy to select a fitting based on installation space and tubing size. TWAS1201F and TWAS1211F use small M3 and M5 threads suitable for compact actuators; TWAS2201F and TWAS3201F cover 1/8–1/2 threads and accommodate 4–12mm tubing.

TWAS Series Speed Control Valve
The new TWAS series speed control valve is a direct-mount valve with a plastic body and a push-in fitting. It regulates the speed of actuators such as cylinders in pneumatic circuits and is available in meter-out and meter-in configurations. The working fluid is air. The proof pressure is 1.5MPa, the maximum operating pressure is 1MPa, and the minimum operating pressure is 0.1MPa. Ambient and fluid temperatures range from -5~60℃ (no freezing). The valve is suitable for nylon, soft nylon, and polyurethane tubing. Connection threads include M3×0.5, M5×0.8, 1/8, 1/4, 3/8, and 1/2; tube sizes include 04, 06, 10, and 12; and body sizes 1, 2, 3, and 4 accommodate different flow rates and installation space requirements.

TWAS Series Inline Control Fittings
The TWAS series consists of inline control fittings (inline throttle/control fittings) for adjusting flow and pressure in pneumatic lines. The tube fitting and control valve body are integrated into a compact inline assembly that connects directly to tubing at both ends, eliminating the need for a separate mounting plate. The series is available in two sealing types: gasket-sealed (M5 thread) and sealant-sealed (R thread). The former has a compact M5 threaded connection, while the latter has a tapered pipe thread with sealant. NPT threads are also available (dimensions shown in parentheses in the diagram). Nominal sizes are expressed by the applicable tubing outside diameter d and include d2, d3.2, d4, d6, d8, d10, d12, and d16 mm. The fittings are grouped into four connection combinations, 01, 02, 03, and 04; models within each group share the same external shape but have different connection combinations at the two ends. The model suffix (S) indicates sealant, and A is the series end designation. The catalog dimensional drawings provide d, T, H, D1, D3, L1~L4, A, M, and weight, all in millimeters.

AS Series In-Line Speed Controllers
In-line speed controllers, also known as in-line flow control fittings or speed control valves, regulate the operating speed of cylinders or actuators in pneumatic circuits. They are installed directly in series within the air line. Turning the adjustment screw changes the throttle opening to provide meter-out speed control. The products are available with gasket-sealed threads (M5) or sealant-sealed threads (R), and fit tubing with outside diameters of φ4, φ6, or φ8. Nominal sizes include the 10 series (AS1001F) and 20 series (AS2001F), with variants including the panel-mount AS**1F-3 and screwdriver-adjustable AS**01F-D. Key dimensional parameters include thread size d, overall height H, outside diameters D1/D3, section lengths L1~L4, and weight. The operating medium is compressed air.

AS Series Bulkhead-Mounted Speed Control Valves
AS series bulkhead-mounted speed control valves (pneumatic flow control valves) regulate the intake or exhaust flow of pneumatic actuators for precise speed control of cylinders and other moving components. The bulkhead (panel) mounting design allows the valve to be fixed directly to a frame or panel, with tubing connected during installation. The valve body uses an in-line adjustable fitting design. Turning the adjustment screw by hand or with a screwdriver changes the throttle opening to regulate flow in one direction. Model numbers use AS as the main designation, with suffixes identifying the series (AS1001F or AS2001F) and compatible tube outer diameter (04/06/08, corresponding to φ4/φ6/φ8mm). Key dimensions include overall length L, height H, mounting thread φ1, and tubing port φ4. Gasket-seal and sealant-seal versions are available, along with thread options such as R/NPT.

AS Series Speed Control Valves
AS series speed control valves are one-way flow control valves installed at the inlet and outlet ports of pneumatic actuators such as cylinders. They control cylinder extension and retraction speeds by adjusting the throttle opening. The series includes AS**1F piping-type control fittings that screw directly into cylinder ports, AS**1F-3 panel-mounted speed control valves, screwdriver-adjustable AS**01F-D models, and AS2201F/AS3201F/AS4201F models with Uni threads. Applicable tube outside diameters range from φ4~φ16. Thread types include M5, R1/8~R1/2, and Uni threads, with gasket-sealed and sealant-sealed versions available. The valve body has a graduated adjustment knob or a screwdriver adjustment mechanism, which maintains the set flow rate when locked. Release rings are available in gray, blue, or black for convenient piping and maintenance. Select a model according to the cylinder port thread, tube outside diameter, and mounting method. For example, AS2201F-U01-04 specifies a 1/8 thread and φ4 pneumatic tubing.

KQ Series Push-to-Connect Fittings
KQ series pneumatic push-to-connect fittings include the KQH, KQL, KQV, KQD, KJH, KQLF, KQVF, KJS, KQLU, KJL, KJF, KQS, KQW and KQE models. They provide quick connections and disconnections between air tubing, pneumatic components and piping. The fittings can be used in vacuum systems. Their black plastic components resist dirt and are easy to identify. Standard threads come with sealant and can be screwed directly into threaded ports without additional thread seal tape. These fittings are suitable for general industrial applications such as metalworking shops, as well as installations where individual gas lines need to be identified, including multi-line piping and equipment with separate air circuits. Configurations include male straight, female straight, hex-socket, male branch tee, threaded tee and extended fittings. Select the appropriate fitting type, tubing outer diameter and thread size for the application.

KJ Series Push-in Fittings
KJ series push-in fittings provide quick connections for nylon and polyurethane tubing in pneumatic piping systems. Tubing can be inserted or removed using the release collet, allowing installation and removal without tools. They are suitable for metalworking shops, automation equipment, and applications where individual air lines need to be identified. The fittings can also be used in vacuum systems. Their black plastic bodies resist dirt and maintain a clean appearance. Standard threaded sections are supplied with sealant pre-applied, allowing them to be screwed directly into female threaded ports for an airtight connection without thread seal tape. Available configurations include male straight, female straight, male elbow, internal hex straight, equal tee, threaded tee, extended thread, and panel-mount types. These can be selected to suit different tube diameters and thread sizes, including M5, M6, G1/8, G1/4, and G1/2. The working medium is compressed air, including vacuum service. Applicable temperature and pressure depend on the tubing material. During installation, check the insertion depth and ensure the collet is securely locked.

KG Series Threaded Push-to-Connect Fittings
KG series threaded push-to-connect fittings are used in pneumatic and vacuum lines to quickly connect plastic tubing to male-threaded ports and can be used in vacuum systems. The black plastic body resists dirt and has a clean appearance. The standard threads are pre-coated with sealant at the factory, providing a seal when screwed into a threaded hole without the need for thread seal tape. There are two basic styles: male straight fittings (KG2H) and male elbow fittings (KG2L). The push-to-connect tube end locks the tubing in place when inserted; press the release ring to remove it. The fittings can be reused. They are suitable for metalworking shops and piping systems where individual gas lines need to be identified. Selection is based primarily on thread size (such as M5, M6, G1/8 or G1/4), compatible tubing outside diameter (such as 4, 6, 8, 10 or 12 mm), and fitting style (straight or elbow).

KS Series High-Speed Rotary Joints
KS series high-speed rotary joints are pneumatic rotary joints with built-in bearings, allowing free 360° high-speed rotation around the central axis. The copper body is nickel-plated to prevent the release of copper ions. The standard version comes with sealant, has a maximum operating pressure of 1.0MPa, and can be used in vacuum systems (vacuum level below 100KPa). It is compatible with nylon and PU hoses. The range includes KSH straight rotary joints and KSL elbow rotary joints for hose outer diameters of Φ4~Φ12mm. Thread sizes include M5×0.8, M6×1.0, and 1/8~1/2 inch. Dimensions include D1, D2, L, and M. These joints are suitable for automated equipment requiring a continuous air supply during rotation.

AKH Series Quick-Connect Fittings
The AKH series consists of pneumatic fittings with quick-connect connections on both ends and a built-in check valve to prevent reverse airflow. They are suitable for vacuum systems (vacuum level below -100kPa). The compact body is easy to install and accommodates tubing with an outer diameter of Φ4~Φ12mm. Specifications shared with the AKB series: working fluid: air; operating pressure range: 100kPa~1MPa; cracking pressure: 0.005MPa; fluid and ambient temperature: -5~60℃ (no freezing); compatible tubing materials: nylon, soft nylon and polyurethane. Available models include AKH04-00, AKH06-00, AKH08-00, AKH10-00 and AKH12-00, with body diameters of ΦD 9.3~21.7mm and lengths of 33.5~70.2mm. Release rings are available in gray, blue or black; plastic bodies are available in gray or black.

AKB Series Quick-Connect Fittings
The AKB series comprises quick-connect fittings with built-in check valves that prevent reverse airflow in pneumatic lines. They are suitable for vacuum systems (vacuum level of -100kPa or below). Their quick-connect design is compact and easy to install, and accommodates tubing with an outside diameter of Φ4~Φ12mm. Specifications shared with the AKH series: operating fluid: air; operating pressure range: 100kPa~1MPa; cracking pressure: 0.005MPa; fluid and ambient temperature: -5~60℃ (no freezing); compatible tubing materials: nylon, soft nylon, and polyurethane. AKB fittings have a male thread on one side and a quick-connect fitting or female thread on the other, allowing direct connection to threaded ports.

KCH Series Equal-Diameter Straight Fittings
The KCH series consists of pneumatic push-in equal-diameter straight fittings for connecting nylon and PU tubing in a straight line. Compatible tube outer diameters are Φ4, Φ6, Φ8, Φ10 and Φ12 mm, with thread sizes M5×0.8, 1/8″, 1/4″, 3/8″ and 1/2″. The body is made primarily of steel with a super-hard surface treatment and does not release copper ions. The maximum operating pressure is 1.0 MPa, and standard compression sealant is used. Air outflow from the fitting is suppressed when the hose is disconnected. KC series products must be used with KCR tube fittings. Select a model based on the applicable tube outer diameter, thread size, hex width across flats H, length L and dimension M.

KCL Series Elbow Fittings
The KCL series consists of pneumatic push-in elbow fittings for φ4~φ10 mm nylon and PU tubing, with a maximum operating pressure of 1.0MPa. The fittings are made of steel with an ultra-hard surface treatment and do not release copper ions. They stop air from escaping through the fitting when the tubing is disconnected. Models are identified by “KCL + applicable tube outer diameter + thread size.” Thread sizes include M5×0.8, 1/8", 1/4", and 3/8"; hex width H, length L, and dimension M vary by specification. KC series products are recommended for use with KCR tube fittings.

KC Series Push-to-Connect Pneumatic Fittings
The KC series consists of push-to-connect fittings for pneumatic lines, including KCH equal-diameter straight fittings and KCL 90-degree elbow fittings. They must be used with KCR plug-in connectors and nylon or PU tubing. Compatible tube outside diameters are φ4, φ6, φ8, φ10 and φ12. Thread sizes include M5×0.8, 1/8″, 1/4″, 3/8″ and 1/2″. Hex widths across flats range from 8~22mm and lengths from 10~46mm. The body is primarily made of steel with an ultra-hard surface treatment and does not release copper ions, making it suitable for clean and copper-free applications. Compression sealant is supplied as standard, and the maximum operating pressure is 1.0MPa. Airflow is shut off when the tubing is disconnected, preventing leakage at the fitting. Model codes consist of KCH or KCL followed by a two-digit tube diameter, then “-” and the thread code M5, 01S, 02S, 03S or 04S.

KC Series Pneumatic Quick-Connect Fittings
This page covers two types of KC series pneumatic quick-connect fittings: KCH equal-diameter straight fittings and KCL elbow fittings, suitable for nylon and PU tubing with outside diameters of φ4~φ12 mm. The fitting bodies are made primarily of steel with an ultra-hard surface treatment and do not release copper ions, making them suitable for clean environments and applications where copper is prohibited. The hex width across flats H is 8~22 mm, and the overall length L is approximately 10.4~45.7 mm. Thread sizes include M5×0.8 and 1/8", 1/4", 3/8", and 1/2" pipe threads. The maximum operating pressure is 1.0 MPa, and standard compression sealant is included. The quick-connect design prevents air from escaping through the fitting when the hose is disconnected. KC series products must be used with KCR insert fittings. The same family also includes KCJ straight insert fittings and KCE female-threaded bulkhead fittings.

VHK Series Manual Valves
VHK series manual valves (finger-operated valves) are compact pneumatic directional control valves designed for manually opening, closing and switching air circuits. The catalog lists standard and flame-retardant versions: the standard version uses VHK2 as its model prefix, while the flame-retardant version uses VHK2R. Both the P and A ports have male threaded connections. The model code consists of the model prefix, P port thread size, A port thread size and the R option. Thread sizes listed on this page include 02S and 04F, and the option is R. The compact design is suitable for installations with limited piping space. Refer to the complete catalog for flow rates, operating pressures and materials.

ZH Series Manifold-Mounted Vacuum Generators
The ZH series manifold-mounted vacuum generators are box-type units designed primarily for vacuum gripping in automated equipment, robotic arms, and end-of-line applications. Specifications are identified by body model, with common models including ZH05B, ZH07B, ZH10B, and ZH13B. Two connection codes follow the model number, such as -06-06 or -08-10. Published specifications include maximum suction flow, air consumption, and connection type. The box-shaped body facilitates manifold mounting, and the catalog provides A–P external dimensions for checking installation space. The units accommodate piping with push-to-connect fittings or threaded connections.

Round Container
The round container is a round vacuum generator with an inline design that connects directly to piping without special installation. Quick-connect fittings are included as standard for fast and easy tubing connections. Its molded resin body is lightweight, making it suitable for compact arrangements on automated equipment. At a supply pressure of 0.4 MPa, it achieves a maximum vacuum level of 85 kPa. Exhaust and flow characteristic curves are provided in the catalog to aid selection. Its 3-stage friction tube structure can increase suction flow by 250% while reducing flow consumption by 20%. The product can be equipped with a valve, vacuum pressure gauge, or pressure switch, and can be mounted from the top, bottom, or side. It is suitable for vacuum suction, handling, and pick-and-place applications.

CV Series Vacuum Generator
The CV Series vacuum generator produces negative pressure in pneumatic systems for vacuum operations such as suction cup gripping, handling, and positioning. It uses air as the working medium, with an operating pressure of 0.1~0.6 MPa and an operating temperature of 0~60℃ (no freezing). No lubrication is required. Six nozzle diameters are available: 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 mm. Options include a switch (S) and adjustable control (K). Thread types are Rc (blank) or NPT (N). Compatible mechanical vacuum signal confirmation devices are available in fixed (-S) and adjustable (-SK) versions, with a setting range of approximately -20.0~-53.2 kPa, operating accuracy of ±5.3, and hysteresis of 4.0~13.3. Electrical ratings are AC12V 5A, AC250V 3A, and DC250V 0.2A. Note: The -SK version does not include H at a vacuum level of 86 kPa.

ZFC Series Vacuum Filters
The ZFC series consists of inline vacuum filters installed in the tubing between a vacuum generator (ejector) and a vacuum suction cup. They trap incoming dust, chips, and oil mist to protect the vacuum generator and vacuum switch and extend maintenance intervals. The series is divided by nominal bore into ZFC100 (low flow) and ZFC200 (high flow), with three connection size options: 04B/06B/08B. Compatible tube outer diameters range from 24~30mm (as stated in the source), and rated flow is 10~50 L/min(ANR). The working fluid is air or nitrogen, the operating pressure range is -100~0kPa (vacuum side), and the filtration rating is 10μm. Ambient and fluid temperatures must be 0~60℃ with no freezing, and the filter element withstands a differential pressure of 0.15MPa. The housing is compatible with nylon, soft nylon, PU, and rubber PU tubing. The replaceable filter elements, I-62S-A / I-63S-A, can be changed by unscrewing the bowl, keeping maintenance costs low. Suitable for vacuum suction circuits in electronics, semiconductors, packaging, material handling, and other applications.

EV Series Vacuum Generators
EV series vacuum generators use compressed air discharged at high speed through a nozzle to create negative pressure in a vacuum chamber, enabling suction cups to grip and transport various workpieces. Standard models EV-05~EV-30 have 0.5~3.0mm nozzles, use air as the working fluid, operate at 0~60℃ and 0.1~1.6MPa[1.0~6.0kgf/cm²], and achieve a maximum vacuum of -91.8kPa[-690mmHg], with air consumption of 13~180L/min and an exhaust flow rate of 6~110L/min. High-flow models EV-10HS~EV-30HS provide a maximum suction flow of 27~220L/min and have 1/8~3/4 inlet and vacuum port threads. An AN series serviceable muffler can be fitted to the exhaust port to reduce noise. Optional mechanical vacuum signal confirmation devices include the fixed -S and adjustable -SK types. The fixed setpoint is -39.9kPa[-300mmHg], the adjustable range is -20.0~-53.2kPa[-150~-400mmHg], and the contact ratings are AC125V 5A and AC250V 3A

Mechanical Vacuum Signal Confirmation Device (-S/-SK Series)
The mechanical vacuum signal confirmation device detects whether the negative pressure in a vacuum circuit has reached the setpoint. A mechanical pressure-sensing mechanism actuates electrical contacts to output a switching signal, allowing operation without an external power supply. It is commonly used for vacuum confirmation and alarms in applications such as vacuum cup handling and vacuum positioning. Two versions are available: fixed (-S) and adjustable (-SK). The fixed version has a factory setpoint of -39.9kPa (-300mmHg) and cannot be adjusted on site. The adjustable version has a setting range of -20.0~-53.2kPa (-150~-400mmHg) and a factory setpoint of -46.6kPa (-350mmHg); its setpoint can be adjusted with a knob to suit operating conditions. Both versions have an operating accuracy of ±5.3kPa (±40mmHg), hysteresis of 4.0~13.3kPa (30~100mmHg), electrical ratings of AC125V 5A and AC250V 3A, and an operating temperature range of 0~60℃. The device can be used with EV series vacuum generators to create a vacuum circuit integrating vacuum generation and detection.

TO Series Pneumatic Push-to-Connect Fittings
The TO series comprises push-to-connect fittings for pneumatic tubing in four configurations: TO-PC straight male threaded fittings, TO-POC cylindrical hex-socket fittings, TO-PCF straight female threaded fittings, and TO-PMF straight female threaded bulkhead fittings. They provide quick connections between PU/PA/nylon tubing and male or female threaded ports in compressed air systems. The tubing locks in place when inserted and can be released by pressing the collet, without tools, simplifying equipment installation and maintenance. Compatible tube outside diameters are 4, 6, 8, 10, 12, 14, and 16 mm. Thread options include M5 metric fine threads; R1/8, R1/4, R3/8, R1/2, and R3/4 tapered pipe threads; and G1/8, G1/4, G3/8, and G1/2 parallel threads. Bulkhead models also have M10×1, M14×1, M16×1, or M20×1 mounting lock threads. The catalog lists dimensions for each model, including L1 (overall length), L2, L3, H, S (across flats/wrench size), T (thread length), and D1 (thread or bore diameter), to help select fittings for the available installation space. The operating medium is filtered compressed air, and the nickel-plated brass body is fitted with a nitrile rubber seal,

TO-POC Series Cylindrical Hex Socket Fittings
The TO-POC series cylindrical hex socket fitting is a push-to-connect male straight fitting for pneumatic lines. Its cylindrical body has a hex socket on the end face, allowing direct installation with a hex key. It is particularly suitable for confined spaces where tightening from the end is required. It accommodates seven tube outside diameters: 4, 6, 8, 10, 12, 14 and 16 mm. Thread options include M5 metric and five tapered pipe threads: R1/8, R1/4, R3/8, R1/2 and R3/4, with 28 sizes in total. Key dimensions are L1 (overall length), H, S, T (thread) and D1, with overall lengths of approximately 18.5~37 mm. The push-to-connect design uses a retaining clip to grip inserted nylon or PU tubing and an O-ring to seal it, allowing tool-free connection and disconnection. The body is typically nickel-plated brass, with an operating pressure of approximately 0~1.0 MPa and a temperature range of -20~+60 ℃. It is widely used for pneumatic connections in automated equipment, pneumatic actuators and tooling fixtures. The model code is TO-POC+tube outside diameter-thread code; thread codes 01/02/03/04/06 correspond respectively to R1/8, R1/4, R3/8, R1/

TO-PCF Straight Female Thread Fitting
The TO-PCF series straight female thread fitting is a pneumatic push-in tube fitting with a female thread (M5, G1/8, G1/4, G3/8, G1/2) at one end and a push-in connection at the other, suitable for tubing with outside diameters of 4mm, 6mm, 10mm, and 12mm. Made of nickel-plated brass, these fittings offer corrosion resistance and a reliable seal. They are widely used to connect cylinders, valves, and other components in pneumatic systems. Key dimensions include L1, L2, H, and S; values vary by model.

TO-PMF Series Female Straight Bulkhead Fittings
The TO-PMF series consists of female straight bulkhead fittings for secure pneumatic connections through enclosure panels, partitions, or cylinder mounts. The push-in end accepts tubing with outside diameters of φ4, φ6, φ8, φ10, and φ12 mm. Female thread sizes include M5, G1/8 (code 01), G1/4 (code 02), G3/8 (code 03), and G1/2 (code 04). Bulkhead mounting threads are M10×1, M14×1, M16×1, and M20×1, with a hex locknut and sealing washer securing the fitting on opposite sides of the panel. The catalog specifies dimensions including L1 (overall length), L2 (threaded section length), L3 (bulkhead section length), H, S (hex width across flats), T (female thread size), and M (mounting thread) for product selection and panel hole design. These compact, reliably sealed fittings are suitable for routing pneumatic lines through panels in automated equipment.

TO-P Series Push-in Pneumatic Tube Fittings
The TO-P series consists of push-in pneumatic tube fittings in a range of configurations, including straight unions (TO-PU), straight bulkhead unions (TO-PM), elbows (TO-PV), tees (TO-PE), Y-unions (TO-PY), crosses (TO-PZA), straight reducing unions (TO-PG), and reducing tees (TO-PEG). They provide quick connection, branching, and transitions in pneumatic lines using φ4~φ16 tubing. The series covers tube outer diameters of 4/6/8/10/12/14/16. For straight unions and tees, overall length L1 increases from 30mm to 74mm and body outer diameter D1 from φ8 to φ23 as tube size increases. Bulkhead models also specify L2 and M10×1~M24×1 mounting threads for panel mounting. Reducing models are designated by “large-end tube diameter-small-end tube diameter” (e.g., TO-PG8-6) and connect lines with different tube sizes. To install, insert the tube fully; the gripping claws lock automatically. Press the release ring to disconnect. These fittings are widely used in automation equipment, fixtures, and pneumatic control circuits.

TO-PM Series Straight Bulkhead Fittings
TO-PM series straight bulkhead fittings are pneumatic push-to-connect fittings that secure and connect air tubing through panels, partitions or equipment walls. Their bulkhead design features a male-threaded end for mounting through the panel and a push-to-connect port for quick tubing insertion and removal. Compatible tubing outside diameters are φ4, φ6, φ8, φ10, φ12, φ14 and φ16 mm, with corresponding thread sizes from M10×1 to M24×1. Overall length L1 ranges from 30~56 mm, L2 from 17.5~38 mm, and outside diameter D1 from φ8~φ23 mm. Select the fitting to match the tubing outside diameter and mounting thread. Applications include automated equipment, pneumatic control cabinets and tubing connections through panels.

TO-PV Series Elbow Fittings
The TO-PV series consists of push-in elbow fittings for 90° turns in pneumatic lines. They belong to the TO-P series of push-in tube fittings, along with TO-PU straight fittings, TO-PM straight bulkhead fittings, TO-PE tee fittings, TO-PY Y fittings, TO-PZA cross fittings, and TO-PG straight reducing fittings. The series is available in seven sizes for tube outer diameters of φ4, φ6, φ8, φ10, φ12, φ14, and φ16. Model numbers consist of TO-PV followed by the tube outer diameter (for example, TO-PV4 fits φ4 tubing). Two key dimensions to consider when selecting a fitting are L1, the length from the center to the end of the fitting (17.5~37 mm), and D1, the maximum outer diameter of the fitting body (φ8~φ23). Simply insert the tubing to seal and lock it in place. The fittings can be connected and disconnected by hand, making them suitable for applications requiring frequent reconfiguration. Their elbow design allows tubing to turn along edges in tight spaces, reducing the required clearance height. Used with nylon or polyurethane tubing, they are widely applied in compressed-air circuits for automated equipment, fixtures, packaging machinery, and electronics assembly lines.

TO-PE Series T-Shaped Tee Fittings
The TO-PE series consists of T-shaped push-in pneumatic tee fittings with an engineering plastic body and metal retaining clips. They split one air supply into two lines and allow pneumatic tubing to be quickly connected and disconnected without tools. Seven tube outside diameters are supported: φ4, φ6, φ8, φ10, φ12, φ14 and φ16 mm, corresponding to models TO-PE4 through TO-PE16. Key dimensions include L1 (overall length), L2 (distance from the branch center to the end face), and D1 (outside diameter). As tube diameter increases, L1 ranges from 35 mm to 74 mm, L2 from 17.5 mm to 37 mm, and D1 from φ8 to φ23. The fittings are suitable for branching and merging compressed air lines, use air as the working medium, and can be used with PU, nylon and other pneumatic tubing. Other configurations in the series include straight (TO-PU), straight bulkhead (TO-PM), elbow (TO-PV), Y-shaped tee (TO-PY), cross (TO-PZA), and reducing fittings for metal tubing (TO-PEG).

TO-PY Series Y-Type Tee Fittings
The TO-PY series consists of Y-type push-in tee fittings for splitting or combining flow through three φ4~φ12 pneumatic tubes in automated pneumatic systems. Models are designated by tube outside diameter: TO-PY4, TO-PY6, TO-PY8, TO-PY10, and TO-PY12. Overall dimensions range from 33~56 mm for L1 and 8.6~20 mm for L2, with fitting end outside diameter D1 ranging from φ8~φ16. These fittings are suitable for pneumatic circuits requiring compact tubing layouts and can be used with matching nylon or PU tubing. Material, operating pressure, and media temperature are not specified on this page; consult the actual product or complete catalog specifications when selecting a model.

TO-PZA Series Four-Way Cross Fittings
TO-PZA series four-way cross fittings connect four pneumatic tubes in a cross configuration to split or combine airflow. They fit tubes with outside diameters of φ4, φ6, φ8, φ10, and φ12 mm and feature push-in connections for easy installation. The body is typically made of nickel-plated brass or engineering plastic, providing pressure and corrosion resistance. Model numbers combine TO-PZA with the tube outside diameter; for example, TO-PZA4 fits φ4 tubing. Dimensions are L1: 30~63 mm, L2: 8~18 mm, and D1: φ8~φ18. These fittings are widely used in automated equipment, pneumatic control systems, and other applications.

TO-PUG/TO-PEG Series Pneumatic Push-in Fittings
The TO-PUG/TO-PEG series consists of reducing pneumatic push-in fittings for quickly connecting or branching tubes with two different outside diameters. TO-PUG is a two-way straight fitting, with model numbers comprising the main and branch tube diameters (for example, TO-PUG6-4 connects φ6 and φ4 tubes). TO-PEG is a three-way branch fitting, with the main tube diameter repeated after the main and branch diameters in the model number (for example, TO-PEG6-4-6). The catalog lists dimensions for each size, including L1 overall length, L2 related length, D1 body outside diameter and d1 bore diameter. Main tube diameters range from φ4~φ16 and branch tube diameters from φ4~φ14; L1 is approximately 34~70 mm, D1 is φ12~φ23 and d1 is φ8~φ21. The fittings are suitable for compressed air lines and tubing connections to pneumatic actuators and sensing components. They are easy to connect and disconnect and provide a reliable seal. Some larger sizes are listed by model number only; their dimensions must be confirmed separately.

TO-PEG Series Push-to-Connect Pneumatic Fittings
The TO-PEG series consists of push-to-connect fittings for quickly connecting and adapting pneumatic tubes of different diameters. The catalog specifies D2 and d2 tube outside diameter combinations, with common sizes including φ4, φ6, φ8, φ10, φ12, φ14, and φ16. It also lists overall and mating dimensions such as L1, L2, D1, and d1. Some large/small diameter combinations list only the model number, with dimensions marked “-” and requiring further confirmation. Simply insert the tubes to install, making pneumatic systems easy to assemble and maintain.

TO-PC-G Series Straight Male Thread Push-in Fittings
TO-PC-G series straight male thread push-in fittings connect pneumatic tubing directly to female threaded ports. They accommodate φ4 and φ6 tubing and are available with G1/8, G1/4, G3/8, G1/2 and G3/4 male threads. Models are distinguished by tubing outside diameter and thread size, such as TO-PC4-01G and TO-PC6-03G. The table lists overall and installation dimensions, including L1, H, S1, S2 and D1, to simplify selection and piping layout. The push-in design makes installation easy for automated equipment, pneumatic control cabinets and general industrial air lines.

TO-POC-G Series Cylindrical Hex Socket Fittings
The TO-POC-G series cylindrical hex socket fitting is a push-in male threaded fitting for pneumatic lines. Its cylindrical body has a recessed hex socket at the end, allowing direct installation with a hex key, particularly in confined spaces where an external wrench cannot reach. The other end features a push-in connection that automatically locks and seals when the tube is inserted; press the release ring to disconnect. The fittings accommodate tubing with an outside diameter of φ4 mm or φ6 mm and have G1/8, G1/4, G3/8, G1/2 or G3/4 parallel pipe threads (BSPP), sealed by an end-face seal. The catalog provides overall and installation dimensions including L1, H, S1, S2 and D1 to facilitate piping layout and wrench selection. These fittings are primarily used to connect compressed air lines to cylinders, solenoid valves and air preparation components.

TO-PL-G Right-Angle Threaded Fitting
TO-PL-G series right-angle threaded fittings (male elbows) connect pneumatic tubing to female threaded ports at a 90° angle. They accommodate tubing with outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm and are available with G1/8, G1/4, G3/8 and G1/2 threads. The body is nickel-plated brass and the seal is nitrile rubber. Features include push-in connections, easy installation and reliable sealing. The typical operating pressure range is 0~1.0 MPa, with a temperature range of -20~+80°C. Model numbers consist of TO-PL + tube diameter + thread size code + G. The table provides dimensions including L1, L2, H, S and D1.

TO-PB-G Series Male Branch Tee Fitting
The TO-PB-G series male branch tee fitting creates a branch from the middle of a main pneumatic line, providing a three-way connection with one inlet and two outlets or two inlets and one outlet. It fits tubing with outer diameters of φ4, φ6, φ8, φ10, φ12, φ14, and φ16 mm, and is available with G1/8, G1/4, G3/8, G1/2, and G3/4 threads. Body dimensions are marked L1, L2, H, S, etc., to help with selection based on available installation space. The model code consists of the base model TO-PB, the tube outer diameter, and the thread size code (01G~06G). For example, TO-PB4-01G denotes a fitting for φ4 tubing with a G1/8 thread. This push-in pneumatic fitting is suitable for compressed air lines, offering easy installation and reliable sealing.

TO-PD-G Series Male Branch Tee Fittings
The TO-PD-G series consists of male branch tee push-in fittings for connecting a threaded side branch in pneumatic circuits. The fittings accept tubing with an outside diameter of φ4~φ16mm and feature G-series male threads in sizes including G1/8, G1/4, G3/8, G1/2 and G3/4. The catalog provides dimensions such as L1, L2, H, S and D1 for each combination of tube outside diameter (φ4/φ6/φ8/φ10/φ12/φ14/φ16) and thread size, making selection straightforward. These fittings are widely used for air distribution in automated equipment and for supplying cylinders and valve manifolds.

TO-PH-G Series Panel-Mount Swivel Elbow Fittings
The TO-PH-G series panel-mount swivel elbow fittings are pneumatic push-to-connect threaded fittings for right-angle connections between tubing and female-threaded ports. They allow tubing to be routed around corners in confined spaces. They accommodate tubing outside diameters of φ4~φ16 mm and thread sizes G1/8, G1/4, G3/8 and G1/2, with hex widths across flats S of 14~24 mm. The catalog provides overall and installation dimensions including L1, L2, L3, H, T and S to help select the appropriate tube diameter and thread combination. The swivel design allows the fitting direction to be adjusted during installation. Typical applications include automation equipment, pneumatic control circuits and machinery piping.

TO-PX-G Series Y-Type Three-Way Threaded Fittings
TO-PX-G series Y-type three-way threaded fittings provide a branch connection with one air inlet and two outlets in pneumatic lines. One end has a male thread (G1/8, G1/4, G3/8, G1/2), while the other two ends have push-in connections for tubing with outside diameters of Φ4, Φ6, Φ8, Φ10, and Φ12 mm. Body dimensions include L1, L2, H, and width across flats S: L1 ranges from 34~60 mm, L2 from 8.6~20 mm, H from 5~9 mm, and S from 12~24 mm. The model number consists of TO-PX, the tube outside diameter code (4/6/8/10/12), and the thread size code (01/02/03/04, corresponding to G1/8, G1/4, G3/8, and G1/2 respectively). The final G indicates the threaded type. Suitable for automated equipment, pneumatic control circuits, and similar applications.

TO-SLL Series Swivel Speed Control Valves
TO-SLL series swivel speed control valves regulate the speed of pneumatic actuators (cylinders). The valve body swivels freely to simplify tubing installation in confined spaces. They accommodate tubing with outside diameters of 4, 6, 8, 10, 12, 14 and 16 mm, with connection threads of M5, R1/8, R1/4, R3/8 and R1/2. The model number consists of a main model code (TO-SLL + tube outside diameter) and a thread code (M5/01/02/03/04). The catalog table provides overall dimensions including L1, L2, L3, S and H. These valves are suitable for flow control in pneumatic circuits in automated equipment.

TO-SQ Series Pneumatic Straight Push-in Fittings
The TO-SQ series consists of straight push-in fittings for pneumatic lines, suitable for nylon or polyurethane tubing with an outer diameter of φ4~φ16. Thread options include M5, R1/8, R1/4, R3/8, and R1/2. The push-in design seals and locks the tube upon insertion; press the release ring to disconnect it, making pneumatic systems quick to assemble and maintain. The catalog provides installation dimensions including L1, L2, L3, H, S, and body outer diameter D1. Fittings can be selected by tube outer diameter and thread size and are widely used in automation equipment, fixtures, pneumatic actuators, and air distribution systems.

TO-SL-G Series One-Way Flow Control Valves
TO-SL-G series one-way flow control valves regulate actuator speed in pneumatic circuits. They allow free flow in one direction and restrict flow in the opposite direction. Push-in fittings provide quick connections for Φ4 and Φ6 tubing. Valve port thread sizes include G1/8, G1/4, G3/8 and G1/2. Models are distinguished by tubing outside diameter and port thread combinations. The catalog provides overall and mounting dimensions, including L1, L2, L3, H and S. These valves are suitable for cylinder speed control and flow regulation in pneumatic fixtures and automated equipment. They are standard pneumatic flow control components and can be selected according to tubing size and port thread.