Pneumatic Components — Page 22

PCF Series Straight Fittings with Parallel Threads (G Thread)
The PCF series comprises straight push-to-connect pneumatic fittings with a male G (BSPP) thread on one end and a push-in tube connection on the other. They connect pneumatic tubing, such as nylon or PU tubing, directly to components with G threads. The body is typically made of nickel-plated brass or engineering plastic, with nitrile rubber (NBR) seals. Suitable for tubing with an outside diameter of Φ4 mm, the fittings are available with G1/8, G1/4, G3/8 and G1/2 threads. With a working pressure of 0~1.0 MPa and a working temperature of 0~60 °C, they are suitable for general industrial pneumatic circuits. To install, simply push the tube in until it locks; to remove it, press the collet to release it. Select the model according to the tube outside diameter and the connection thread size.

PCG Series Round-Thread Straight Fittings
PCG series round-thread straight fittings are push-in fittings for pneumatic lines, presented in the catalog in three configurations: PC-G, PCG and PCF. One end has a push-in collet for pneumatic tubing with an outside diameter of Φ4~Φ16 mm; the other has a straight threaded connection in sizes including M5, M6, R1/8~R1/2 and G1/8~G1/2. They connect tubing directly to threaded ports on cylinders, solenoid valves and air preparation units. The bodies are typically made of nickel-plated brass or engineering plastic, with rubber seals for quick connection and disconnection and reliable sealing in standard industrial pneumatic circuits. Select a fitting by combining the tubing outside diameter ΦD with the required thread size. The catalog provides dimensions including ΦD1, ΦD2, L1, L2, O and width across flats φ to assist selection based on installation space and flow requirements.

PB Series Male Branch Tee
PB series male branch tees provide branch connections in pneumatic lines and are available in G thread (M5, M6, R1/8~R1/2) and NPT thread (NPT1/8~NPT1/2) versions. Compatible tube diameters range from Φ4~Φ14 mm and 5/32~1/2 inch. Body dimensions are defined by L1, L2, L3, ΦD1 and φ, making it easy to select a fitting by tube diameter and thread size. These standardized branch fittings are suitable for pneumatic piping in factory automation systems.

PL Series L-Type Threaded Elbow
The PL series L-type threaded elbow is a push-to-connect pneumatic fitting that connects air tubing to a threaded port at a 90° angle. It has a metal body and a push-in collet and accepts Φ4 and Φ6 metric tubing, as well as 5/32″, 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ inch tubing. Thread options include M5 and M6 metric threads and R1/8~R3/4 British tapered pipe threads; the PL-N variant uses NPT1/8~NPT1/2 American tapered pipe threads. The catalog lists all dimensions by ΦD, R, L1, L2, L3, ΦD1 and Φ1. These fittings are suitable for automation equipment, pneumatic circuits and industrial piping.

PL-N Series L-Shaped Threaded Elbow (NPT Thread)
The PL-N series consists of L-shaped (90°) threaded elbow pneumatic push-in fittings, with an inch-size push-in tube connection and an NPT tapered pipe thread. Six tube sizes are available: 5/32", 3/16", 1/4", 5/16", 3/8", and 1/2", with four thread sizes: NPT1/8, NPT1/4, NPT3/8, and NPT1/2. Model numbers follow the format “PL+tube diameter-N+thread code” (e.g., PL1/4-N02). The body is nickel-plated brass, and the threaded end is pre-coated with sealant for direct installation into a female NPT thread without additional thread seal tape. The L-shaped design routes tubing through a 90° turn to save installation space. The catalog provides dimensions including L1 (thread engagement depth), L2 (overall length), L3 (height across flats), ΦD1 (hex width across flats), and Φ1 (thread outside diameter) for selection and clearance checks. Suitable for compressed air, vacuum, water, and other non-corrosive media. Operating pressure: 0~1.0 MPa; operating temperature: -20~60℃.

PD-N Series Threaded Branch Tee - NPT Thread
The PD-N series is a threaded branch tee fitting with push-to-connect tube ends and a threaded branch for splitting and branching pneumatic lines. The catalog lists thread sizes including G1/8, G1/4, G3/8 and G1/2, as well as a separate NPT thread series in sizes including NPT1/8, NPT1/4, NPT3/8 and NPT1/2. Models are designated PDG-01, PDG-02, PDG-03 and so on according to connection size. Each designation covers multiple dimensional configurations, including thread length, center distance, overall length, outside diameter and hex across-flats size. These are listed row by row in the catalog's dimension table. Select the appropriate fitting based on the tube outside diameter and thread size. The body is generally made of nickel-plated brass or engineering plastic and is suitable for compressed air lines. Working pressure is typically selected according to standard pneumatic fitting ratings. To install, simply insert the tube and tighten the threaded end.

PLL Series Extended L-Shaped Threaded Elbow
The PLL series extended L-shaped threaded elbow is a push-in pneumatic fitting designed for right-angle connections between tubing and threaded ports. Body sizes include 04, 06, 08, 10, 12 and 15, accommodating tubing with outside diameters of 4, 6, 8, 10 and 12 mm. Thread sizes include M5, M6, G1/8, G1/4, G3/8, G1/2, R1/8, R1/4, R3/8 and R1/2. Mounting dimensions include L1, L2, L3, φD1 and φ to suit different space and flow requirements. Model numbers combine the body size and thread code, such as PLL04-M5 and PLL06-G01.

PL-G Series L-Shaped Threaded Tube Fittings
PL-G series L-shaped threaded tube fittings are push-to-connect pneumatic fittings for connecting tubing with outer diameters of 4, 6, 8, or 10 mm at a 90° angle to externally threaded pneumatic components. The push-lock mechanism seals the tube upon insertion; press the release ring to disconnect it. The listed models cover thread sizes G1/8, G1/4, G3/8, G1/2, and M5, with dimensions including L1, L2, L3, φD1, and φ provided for tubing layout and clearance checks. They are suitable for compact pneumatic connections in automated equipment, valve manifolds, cylinders, and fixtures.

PXG Series Plastic Y-Shaped Five-Way Fittings
PXG series plastic Y-shaped five-way fittings are pneumatic tube connectors used to split or combine airflow in automated equipment. The catalog lists four standard models: PXG06-04, PXG08, PXG08-04, and PXG08-06. The main port diameter ΦD is 6 mm or 8 mm, while the branch port diameter ΦD1 is available in 4, 6, and 8 mm. Overall dimensions include ΦD2, ΦD3, ΦD4, L, L1, and L2. Models vary by tube diameter and installation space, making them suitable for compact multi-line pneumatic connections.

PXT Series Y-Type Threaded Five-Way Fitting
The PXT series Y-type threaded five-way fitting provides branch connections in pneumatic piping, distributing air from one source to multiple actuators. It is available for tubing outside diameters including Φ4, Φ6 and Φ8 mm, with threaded connections including R1/8, R1/4, R3/8 and R1/2, as well as M5 and M6 on PXT-G variants. These options accommodate different combinations of tube diameters and threads. The catalog provides overall and mounting dimensions, including ΦD, R, L, L1, L2, L3, ΦD1, ΦD2 and Φ, to assist with selection and piping layout. Suitable for factory automation equipment, pneumatic fixtures and cylinder piping.

PXT-G Series Y-Type Threaded Five-Way Fitting
The PXT-G series Y-type threaded five-way fitting (G-thread type) is a pneumatic or fluid line connector with a Y-shaped flow passage. It connects to equipment ports using G threads (M5, M6, R1/8, R1/4, R3/8, R1/2). The series accommodates three tube diameters, ΦD 4, 6, and 8 mm, and is available with various port diameters (ΦD1 11.5~26.5 mm) and overall dimensions φ (10~20 mm). Key dimensions include L1 (3.5~13.5 mm), L2 (20~35 mm), and L3 (12.2~34 mm), allowing selection according to available installation space. PXT04-Gnn model codes distinguish the different tube diameter and thread combinations. There are 27 standard configurations for quick tubing connections in automated equipment, pneumatic actuators, and fluid circuits.

PL New Threaded Elbow
The PL series new threaded elbow (45-degree elbow) changes the direction of airflow in pneumatic lines. It uses G threads (G1/8, G1/4, G3/8, G1/2) and is compatible with tubing outside diameters of Φ4, Φ6, Φ8, Φ10 and Φ12. The product model consists of the base model PL45, a tube diameter code and a thread code. For example, PL45-04-G01 denotes a Φ4 tube diameter and a G1/8 thread. Key dimensions include L1, L2, L3, L4, ΦD1 and ΦD2; see the specification table for values. Suitable for automation equipment, pneumatic control systems and similar applications.

PL-G Series New Threaded Fittings with G Threads
PL-G series new threaded fittings with G threads provide threaded connections for pneumatic or fluid lines and are available in two body sizes: ΦD 4 mm and ΦD 6 mm. PL04 models cover G1/8, G1/4, and G3/8 threads, while PL06 models cover G1/8, G1/4, G3/8, and G1/2 threads. Multiple combinations of L1, L2, and L3 lengths and ΦD1 and ΦD2 dimensions accommodate different installation spaces and tubing requirements. Models are listed by code in the catalog; select the appropriate model by matching the thread size, body outside diameter, and overall dimensions.

PX Series Y-Type Threaded Tee
PX series Y-type threaded tees split or combine flow in pneumatic piping. Their Y-shaped design features a male threaded connection and accommodates various tubing diameters and thread sizes. The catalog covers the PX04, PX06, PX08, PX10 and PX12 series, with thread options including M5, M6, R1/8, R1/4, R3/8 and R1/2. It also lists overall and installation dimensions such as ΦD, L1, L2, L3, L4, ΦD1, ΦD2 and φ to help select the right fitting for available space and connection requirements.

PKD Series Threaded Five-Way Fittings
PKD series threaded five-way fittings distribute air from one inlet to multiple outlets in pneumatic lines and are suitable for tubing with outer diameters of Φ4 and Φ6. Available in 9 standard models, they feature M5 metric threads or R1/8, R1/4, R3/8, and R1/2 tapered pipe threads. Body dimensions include ΦD3 66~76.5 mm, ΦD4 42 mm, heights H1 22/26 mm and H2 13/14.5 mm, and lengths L1 3.2 mm, L2 19/20.5 mm, L3 9 mm, and L4 10 mm. To select a model, first choose size 04 or 06 according to the tubing outer diameter, then select connection code M5 or 01~04 according to the thread.

PY Series Plastic Pneumatic Tube Fittings
The PY series is a family of pneumatic tube fittings with engineering plastic bodies, designed for quick tube-to-tube and tube-to-thread connections and branching in compressed air lines. The range includes push-in fittings such as PY plastic Y-unions, plastic reducing unions and plastic elbows, as well as PKD threaded five-way fittings for multi-line collection or distribution. Fittings are sized by the outside diameter of the tube, commonly Φ4 or Φ6. Thread options include M5 metric female threads and R1/8, R1/4, R3/8 and R1/2 tapered pipe threads, which can be screwed directly into ports on pneumatic components such as cylinders, solenoid valves and filters. The fittings lock on insertion without tools, are easy to remove, offer low flow resistance and provide stable pressure resistance and sealing. They are suitable for clean, dry compressed air lines in automation equipment, packaging machinery, electronics assembly lines and similar applications. Select the main model by tube outside diameter (PKD04 corresponds to Φ4, PKD06 to Φ6), and select the thread size code to match the port on the connected component.

PE Series Plastic Union Tee
The PE series plastic union tee is a push-to-connect pneumatic fitting that joins two aligned air tubes with a branch tube. It is commonly used to distribute air in automated equipment. The injection-molded engineering plastic body (nylon/polyoxymethylene) is lightweight, corrosion-resistant and electrically insulating, and is suitable for non-corrosive fluids such as air and water. Seven basic sizes, PE04 through PE16, accommodate tube outside diameters of Φ4~Φ16 mm. Body outside diameter ΦD2 ranges from 11.5 mm to 26.5 mm, overall length L1 from 38~64 mm, socket depth L2 from 14~32 mm, and socket outside diameter ΦD3 from 3.2~4.3 mm. Reducing combinations such as PE16-04-06 are also listed for connecting tubes of different diameters. Together with the PM bulkhead union, PLM bulkhead male elbow and PZ plastic union cross from the same series, these fittings form a complete plastic push-to-connect system. For installation, push the tube fully into the fitting; internal gripping claws and an O-ring secure and seal it. No tools are required, and the fitting can be disconnected and reconnected repeatedly.

PM Series Straight Bulkhead Union
The PM series straight bulkhead union is a plastic push-to-connect pneumatic fitting used to secure and connect tubing through panels, partitions, or enclosure walls. The fitting body passes through a mounting hole and is secured to the panel with a locknut. Tubing pushes directly into the fittings at both ends for quick installation and removal. It is commonly used for through-panel pneumatic connections between cylinders, solenoid valves, air preparation components, and tubing circuits. The series comprises five models based on compatible tubing outside diameter: PM04, PM06, PM08, PM10, and PM12, with corresponding ΦD values of 4, 6, 8, 10, and 12 mm. The catalog table also specifies ΦD1 (outside diameter of the through-panel/threaded section) and overall and mounting dimensions such as L, L1, L2, M, and φ, making it easier to select a fitting based on panel thickness and mounting hole diameter. The same catalog page also lists related plastic push-to-connect fittings, including PLM bulkhead threaded fittings, PZ plastic four-way fittings, and PE plastic equal tees. These are separate series; the PM series covers only straight bulkhead unions. Selection is primarily based on three parameters: tubing outside diameter ΦD, mounting hole size, and bulkhead thread specification.

PLM Series Bulkhead Union Fittings
The PLM series bulkhead union is a plastic push-in fitting for connecting pneumatic tubing through a panel. It is suitable for tubing with an outside diameter of 4mm to 12mm. Made from engineering plastic, these fittings are corrosion-resistant, lightweight, and easy to install. Key dimensions include nominal diameter ΦD (4/6/8/10/12mm), outside diameters ΦD1 and ΦD2, overall length L, lengths L1 and L2, thread size M, and wrench flat size φ. They are suitable for panel mounting and tubing connections in automation equipment, pneumatic control systems, and similar applications.

PZ Series Plastic Four-Way Fittings
The PZ series consists of plastic four-way (cross) fittings for distributing or combining air across four pneumatic lines. They can be used with other plastic pneumatic fittings in the same series, including PM bulkhead straight fittings, PLM bulkhead threaded fittings, and PE plastic equal tees. Sizes are specified by tube outside diameter: five metric sizes, ΦD 4, 6, 8, 10, and 12 mm, and five inch sizes, 5/32, 1/4, 5/16, 3/8, and 1/2, all in the same fitting design. Catalog dimensions include ΦD tube outside diameter, ΦD1 body outside diameter, ΦD2 bore diameter, L1 overall length, L2 center-to-end distance, and L3 branch length. As the tube outside diameter increases, the body outside diameter increases from 11.5 mm to 21.5 mm, the overall length from 38 mm to 59 mm, and the bore diameter from 3.2 mm to 4.3 mm. The fittings have plastic bodies and push-in connections, making them suitable for tubing and air distribution in general industrial pneumatic circuits.

PU Series Plastic Straight Union
The PU series plastic straight union is a push-in fitting commonly used in pneumatic lines to connect or extend plastic tubing. Models are classified by tube outside diameter, with sizes ranging from Φ4 to Φ332 mm. The table lists overall dimensions including ΦD, ΦD1, ΦD2, ΦD3 and total length L. The fitting has a lightweight plastic body and installs by simply inserting the tube. Body outside diameter and length vary by tube size, so check both the tube diameter and available installation space when selecting a model. Suitable for automation equipment, pneumatic control systems and general industrial piping.

PMF Series Female Threaded Straight Bulkhead Fitting
The PMF series female threaded straight bulkhead fitting secures and connects pneumatic tubing as it passes through a panel or partition. One end has an Rc female tapered pipe thread, while the other has an M-threaded bulkhead mounting section. A locknut secures the fitting to a control cabinet, enclosure, or cylinder partition. It accommodates tubing with an outside diameter of Φ4~Φ12 mm. Rc thread sizes include Rc1/8, Rc1/4, Rc3/8, and Rc1/2, while bulkhead mounting thread sizes include M12×1, M14×1, M16×1, M20×1, and M22×1. Overall length L1 is 24~37 mm, and mounting outside diameter ΦD1 is 14~24 mm. The fittings are typically made of nickel-plated brass with nitrile rubber seals. They resist pressure and vibration, are easy to install and remove, and are widely used for through-panel pneumatic connections in pneumatic control systems, automation equipment, and electronic equipment.

PHF Series Inline Connectors
PHF series inline connectors are straight male-to-female threaded adapters for pneumatic and fluid lines. One end has a male thread (M5, R or NPT) and the other a female thread (M5, Rc or NPT). They are used to extend lines, adapt threaded connections or connect components with different thread sizes in series. The standard PHF series fits tube diameters ΦD 4~12mm, with threads including M5, R1/8~R1/2 and Rc1/8~Rc1/2. The PHF-N series is the imperial NPT-threaded version, fitting tube diameters 5/32~1/2in with threads from NPT1/8~NPT1/2. The catalog specifies four lengths, L1, L2, L3 and L4, the ΦD1 outside diameter and the φ hex width across flats to facilitate installation space checks. The compact connectors are suitable for factory automation pneumatic circuits, fixtures, jigs and general industrial fluid lines.

PHF-N Series Inline Fittings (NPT Thread)
PHF-N series inline fittings are straight push-in fittings for inch-size pneumatic tubing. They have an NPT male thread (R) at one end and an NPT female thread (Rc) at the other, for straight connections, transitions or panel-mounted connections between two pneumatic lines. Compatible tube outside diameters are 5/32, 3/16, 1/4, 5/16, 3/8 and 1/2 inches. Four thread sizes are available: NPT1/8, NPT1/4, NPT3/8 and NPT1/2, with 14 standard models in total. Key dimensions include tube diameter ΦD, male/female thread size R/Rc, thread length L1, effective thread engagement length L2, overall length L3 (29~47.5 mm), insertion end length L4, body outside diameter ΦD1 (11.5~21.5 mm) and hex width across flats φ, for checking installation clearance and selecting a wrench. The model code combines the series designation PHF, the tube diameter as an inch fraction and the NPT thread size code (N01~N04).

PYJ Series Push-In Y Fittings
The PYJ series push-in Y fittings are quick-connect fittings for pneumatic lines. They split one air line into two, providing branch connections between pneumatic components such as cylinders, air valves, and air preparation units. The range comprises five basic sizes based on tube outside diameter ΦD: 4, 6, 8, 10, and 12 mm (PYJ04, PYJ06, PYJ08, PYJ10, and PYJ12). Reducing and equal-diameter combinations are also available, including PYJ06-04, PYJ08-06, PYJ10-08, PYJ12-10, PYJ04-04, PYJ06-06, and PYJ08-08, facilitating connections between different tube sizes. The catalog specifies ΦD (tube outside diameter), ΦD1 (body outside diameter), ΦD2 (through-hole diameter), and lengths L1–L4 as the main dimensions. For example, PYJ04 has ΦD4, ΦD1 11.5 mm, ΦD2 3.2 mm, and L1 52.5 mm; PYJ12 has ΦD12, ΦD1 21.5 mm, ΦD2 4.2 mm, and L1 75.5 mm. Material, operating pressure, operating temperature, and other parameters are not specified on this page; actual

PHF-G External Hex Fitting with G Thread
PHF-G series external hex fittings feature G threads (BSPP) and are designed for threaded pipe connections. Their hexagonal shape allows easy installation and removal with a wrench. They are suitable for connecting pipes and components in pneumatic, hydraulic, and cooling systems. Typically made of brass or nickel-plated brass, these fittings offer good corrosion resistance and sealing performance and can be used with media such as air, water, and oil. Select the appropriate fitting based on the thread size and pipe diameter.

PH Series Hex Fittings
PH Series hex fittings are threaded connectors for pneumatic piping. Their hexagonal body allows direct installation and tightening with a wrench. They connect air tubing to threaded ports or join two sections of piping. The catalog lists two thread variants in this series: PHF-G is an inline fitting with G threads, featuring G (parallel) threads at both ends to join two threaded ends; PH-N is a hex fitting with tapered NPT pipe threads for sealed connections to NPT-threaded ports. Select the appropriate variant based on thread specification (nominal G or NPT thread size), pipe diameter, and whether an inline configuration is required. For an airtight seal, wrap the male threads with PTFE tape or apply thread sealant during installation. These fittings are suitable for general pneumatic circuits carrying air or under vacuum. Refer to the dimension table for each variant for materials, specific thread sizes, and overall dimensions.

PH-N Series External Hex Fitting - NPT Thread
The PH-N series external hex fitting (NPT thread) is a threaded fitting for pneumatic piping. One end has a male NPT American tapered pipe thread that screws directly into valve bodies, cylinders, or equipment ports with female NPT threads. The external hexagonal body allows quick tightening with a wrench in confined spaces, while the mating tapered threads provide the seal. Common thread sizes include NPT1/8, NPT1/4, NPT3/8, and NPT1/2. The body is generally made of brass, with stainless steel also available. Designed for compressed air, the fitting is widely used in automated equipment, pneumatic fixtures, and production-line air piping. Select the model based primarily on the thread size and the size of the mating air tube or port.

PP Tube Plug
A PP tube plug is a plastic closure used at the ends of pneumatic and automation tubing. It seals ports to keep out dust, chips, and foreign matter, and can temporarily or permanently close unused tube connections. Typically made of polypropylene (PP), it is corrosion-resistant, electrically insulating, lightweight, inexpensive, and easy to insert and remove. It is suitable for use with pneumatic components such as nylon tubing, polyurethane tubing, and push-in fittings. This series is listed in the catalog under “PP Tube Plug.” Compatible tube diameters, dimensions, colors, and other details should be confirmed in the applicable specification table.

PPF Series Tube Caps
PPF series tube caps are accessories for pneumatic push-in (quick-change) fitting systems. They seal temporarily unused pneumatic tube ends or female-threaded fitting ports, preventing dust, cutting fluid, and oil contamination from entering the lines. They can also provide temporary seals during pressure testing or transport. They are commonly used with pneumatic fittings such as PP series tube plugs, PH/PHF series external hex fittings, and PYJ push-in tees. Most are made of plastic (PP/nylon), although metal versions are also available. Common compatible tube outside diameters include 4, 6, 8, 10, and 12 mm. Push-in installation requires no tools and allows repeated removal and reinstallation. Select the model primarily by the compatible tube outside diameter (ΦD) and installation method (push-in or male thread). The operating pressure and temperature ranges should match those of the associated push-in fitting to prevent seal failure due to excessive pressure or temperature. This page provides a catalog listing only; refer to the full page for detailed dimension tables.

PHT Series Stackable Elbow Fittings
PHT series stackable elbow fittings are multi-port push-in fittings for pneumatic lines. They connect multiple branch lines in a right-angle stack, making them suitable for branching and joining air lines in compact spaces. They are available for 4, 6, 8, 10, and 12 mm tubing, with R1/8~R1/2 tapered pipe threads or G1/8~G1/2 parallel pipe threads, and in 2- and 3-section configurations. The catalog provides overall dimensions, including ΦD, ΦD1, ΦD2, and L1~L6, for each model to aid selection and installation.

PGJ Series Push-In Straight Connectors
The PGJ series push-in straight connector is a tube-to-tube fitting with push-in connections at both ends. It joins two metric pneumatic tubes directly to extend or adapt piping in pneumatic circuits, with no tools required for connection or disconnection. The series covers nominal tube diameters of φ4, φ6, φ8, φ10 and φ12, with 8 sizes in total (PGJ06-04 to PGJ12-10). The body outside diameter ΦD2 ranges from 10~17mm, L1 from 13.5~21mm, and the overall length L2 from 34~46mm. The model number consists of PGJ followed by two numbers indicating “large-end tube diameter-small-end tube diameter.” Select the model to match the outside diameter of the tube at each end. A PPGJ push-in plastic straight connector is also available in the same size range and dimensional system, allowing selection based on cost and operating conditions. The catalog table prints the model prefix as PGH; this is a typographical variation of PGJ.

PPGJ Series Push-in Plastic Straight Connectors
PPGJ series push-in plastic straight connectors are injection-molded from engineering plastic for quick, straight connections between pneumatic tubes. Sizes are specified by the applicable tube outside diameter ΦD (6, 8, 10, 12 mm) and mating end dimension ΦD1, with models ranging from PPGJ06-04 to PPGJ12-10. Key dimensions include ΦD, ΦD1, ΦD2 (outer/hex diameter), and lengths L1 and L2. L1 is approximately 20~26.5 mm and L2 is approximately 36.5~50 mm. The connectors lock upon insertion and are easy to install and remove. They are suitable for quick connection of plastic tubing (PU/PA, etc.) in pneumatic systems using compressed air.

PLJ Series Push-In Elbow
The PLJ series push-in elbow (90° push-in elbow) is a quick-connect fitting for pneumatic lines. It connects two plastic air tubes (PU, PE or nylon) at a 90° angle, allowing right-angle routing and compact piping. Five standard sizes are available by nominal tube diameter: ΦD4, ΦD6, ΦD8, ΦD10 and ΦD12. Reducing sizes, including PLJ06-04, PLJ08-06, PLJ10-08 and PLJ12-10, are also available for connecting tubes of different diameters. The catalog specifies seven overall and mounting dimensions—ΦD, ΦD1, ΦD2, L1, L2, L3 and L4—to help with selection and installation space checks. The fitting body is typically made of nickel-plated brass or engineering plastic, with an O-ring and retaining clip for tool-free connection, quick disconnection and repeated use. It is widely used in pneumatic piping for automated equipment, fixtures and robot end effectors.

PBJ Series Push-In Tee Fittings
PBJ series push-in tee fittings provide quick branch connections for pneumatic tubing. They are suitable for nylon or polyurethane tubing with outside diameters of 4, 6, 8, 10, and 12 mm. The push-in locking design allows tool-free installation. Equal and reducing sizes, such as PBJ06-04, accommodate branch connections between different tubing diameters. The catalog provides dimensions including ΦD, ΦD1, ΦD2, L1, L2, and L3 to help with tubing layout and clearance checks. These fittings are suitable for automated equipment, pneumatic control cabinets, and general industrial air systems.

PKJ Series Push-in Five-Way Fittings
The PKJ series consists of push-in five-way fittings for pneumatic tubing, with one inlet and four outlets for distributing a single air supply to multiple actuators or branch lines. Simply insert tubing of the specified outside diameter to lock and seal the connection. To disconnect, press the release ring; no tools are required. The series accommodates four tube outside diameters: Φ4, Φ6, Φ8, and Φ10. Reducing models, including PKJ06-04, PKJ08-04, PKJ10-06, and PKJ10-08, distribute air between tubes of different diameters. Key dimensions include tube diameters ΦD/ΦD1, overall length L, section lengths L1~L3, overall heights H1/H2, body diameter ΦD2, and mounting hole diameter ΦD3. These dimensions can be used to check installation space and tubing routing. The fittings are widely used in automated equipment, fixtures, packaging machinery, and pneumatic control circuits.

PXJ Series Push-In Five-Way Fittings
PXJ series five-way fittings provide push-in connections for pneumatic tubing, allowing multiple air lines to be connected and distributed quickly. They are easy to install and provide a reliable seal. They accommodate tubing with outside diameters of Φ4, Φ6, Φ8, Φ10 and Φ12 mm, with reducing sizes including PXJ10-04, PXJ10-06 and PXJ10-08. Dimensions are specified by ΦD (tube outside diameter), ΦD1~ΦD3 (outside diameters of the respective ports), and length parameters L, L1, L2 and L3. These fittings are widely used in pneumatic piping systems for automated equipment and pneumatic actuators.

SC/SL Series Flow Control Valves
SC/SL series flow control valves regulate actuator speed and are designed for use with air at pressures of 0~150 PSI (approximately 0~990 kPa). Turn the needle counterclockwise to open and clockwise to close. Adjusting the needle opening changes the flow rate and thus the actuator speed. Standard body diameters include Φ4, Φ6, Φ10 and Φ12, with port threads M5, R1/8, R1/4, R3/8 and R1/2. The SC-N/SL standard NPT-thread version offers connections including UNF10-32 and NPT1/8. A small amount of air leakage is permitted, so the product is unsuitable for applications where leakage is strictly prohibited. During adjustment, open the needle slowly to prevent sudden actuator movement, and do not force or rotate the product.

SC/SL Series Flow Control Valves
SC/SL series flow control valves (speed control valves) regulate the operating speed of pneumatic actuators such as cylinders. A needle adjusts the flow passage to throttle inlet and exhaust air. The valve body combines plastic and metal; because wear occurs between the plastic body and the contact surface, the outlet can rotate freely to facilitate tubing layout. The operating medium is air only, with no other gases or liquids permitted. The operating pressure range is 0~150 PSI (0.9~9.9 kgf/cm², 0~990 kPa). The products are available in two main versions: standard R (BSP) threaded and SC-N/SL series NPT threaded. R thread sizes include M5, R1/8, R1/4, R3/8 and R1/2, with corresponding tube diameters of Φ4, Φ6, Φ10 and Φ12. NPT versions include UNF10-32 and NPT1/8, with a corresponding tube diameter of 5/32". The suffix (B) denotes an optional version as marked in the source. The valve design permits a small amount of air leakage at the fully throttled position and is not suitable where leakage is strictly prohibited. When adjusting, slowly open the needle from the fully closed position: turn counterclockwise to open and clockwise to close. Do not force or overtighten it, as this may cause damage or leakage.

SS Free-Swivel Push-in Pneumatic Fittings
SS free-swivel push-in pneumatic fittings convey compressed air and allow tubing to be connected or disconnected with a single push. They are suitable for polyurethane (PU) and nylon (PA) tubing. The PC type has an internal hexagonal socket, allowing more tubing to be arranged in a confined space. The PL and PT types have a swivel mechanism in the body for easy angle adjustment in multi-line installations. The threaded portion is fitted with an O-ring or uses a specially designed thread. Metric thread sizes are M3×0.5, M5×0.8, and M6×1.0; tapered pipe thread sizes are R1/8, R1/4, R3/8, and R1/2. Operating pressure is 0~150 PSI (0~9.9 kgf/cm², 0~990 kPa), negative pressure is -750 mmHg (-29.5 inHg), and operating temperature is 0~60 ℃. The fluid is limited to air. During installation, select a tool suited to the fitting's hex size and verify the thread type.

PC Series Push-to-Connect Fittings
PC series push-to-connect fittings carry compressed air and allow tubing to be easily connected or disconnected in a single action. The PC type features an internal hexagonal socket, allowing more tubing connections to be installed in confined spaces. The threaded section has an O-ring or special thread, eliminating the need for additional sealing. The fittings are suitable for air only and must not be used with other gases or liquids. Operating pressure is 0~150PSI (0~9.9kgf/cm², 0~990kPa), vacuum pressure is -29.5inHg (-750mmHg), and operating temperature is 0~60°C. Compatible tubing materials are polyurethane and nylon. Thread sizes include M5, M6, and tapered pipe threads R1/8, R1/4, R3/8 and R1/2. During assembly, select the correct tool size for the fitting's hexagonal socket and confirm the thread type.

PL Push-In Fitting
The PL push-in fitting is a pneumatic fitting for compressed air lines. Tubing can be easily connected or disconnected with a single push or pull, making installation and maintenance convenient. The PL and PT models feature a swiveling internal body that facilitates tubing routing in confined spaces; the PC model has a hexagonal socket for easier installation in tight spaces. The threaded end has an O-ring or specially designed threads that are precision-verified and generally require no additional sealing. The fitting is suitable for air only and must not be used with other gases or liquids. Operating pressure is 0~150 PSI / 0~9.9 kgf/cm² (0~990 kPa), vacuum pressure is -29.5 inHg / -750 mmHg (-750 Torr), and operating temperature is 0~60°C (32~140°F). Compatible tubing materials are polyurethane and nylon. Thread options include metric threads (M5×0.8, M6×1.0, etc.) and tapered pipe threads. Select an appropriate tool according to the corresponding hex width across flats when installing.

PT Type Push-in Fitting
The PT type push-in fitting is a tee fitting for distributing compressed air in pneumatic systems. Its swivel body allows tubing to be routed freely in confined spaces, improving installation efficiency and allowing more tubing within a given space. Tubing can be quickly connected and disconnected with a simple push action. The threaded end has an O-ring or specially designed thread that is precision-machined and validated, generally eliminating the need for special sealing measures. During assembly, simply select a tool matching the fitting's hex size and confirm the thread type. The fitting is suitable for air only, not other gases or liquids. Its operating pressure is 0~150 PSI (0~9.9 kgf/cm², approximately 0~990 kPa), with vacuum capability down to -29.5 inHg (-750 mmHg, -750 Torr), and an operating temperature of 0~60 ℃ (32~140 ℉). Thread sizes include metric M5×0.8 and M6×1.0, and tapered pipe threads R1/8, R1/4, R3/8, and R1/2 (rendered by OCR in the original as R1.8, R1.4, R3.8, and R1.2). It is compatible with polyurethane (PU) and nylon (PA).

AS Series Speed Control Valves with Push-in Fittings
AS series speed control valves with push-in fittings are one-way flow control valves for pneumatic circuits. They regulate the extension and retraction speeds of cylinders and other actuators through a throttling orifice. The integrated push-in fitting allows tubing to be inserted directly for quick installation. Thread sizes include M3x0.5, M5x0.8, M6x1.0 and 1/8", while compatible tubing outside diameters are Φ3, Φ3.2, Φ4, Φ6, Φ8, Φ10 and Φ12. Fitting styles include tube-end and flat types, with control types 0 and 1 available. Some models have a sealant coating, designated S, to ensure a tight threaded connection. These valves are widely used for speed and flow control in pneumatic systems for automated equipment, packaging machinery and assembly lines.

KJH Series Male Thread Straight Fittings
KJH series male thread straight fittings are push-in pneumatic tube fittings with a male thread at one end, available in metric fine thread sizes including M3×0.5, M5×0.8, M6×1.0 and M8×1.0, as well as a 1/8" imperial thread. The push-in port at the other end accepts nylon or polyurethane tubing for quick connection and disconnection between pneumatic components and tubing. Common body sizes include KJH03, KJH23, KJH04 and KJH06, with different fitting lengths and hex widths across flats. The body is typically made of nickel-plated brass, and the release ring is available in gray, orange-red or black. These fittings connect tubing to threaded ports in various pneumatic control circuits.

KJS Series Hex Socket Straight Fitting
The KJS series hex socket straight fitting, also known as a male-threaded hex socket straight fitting, is a pneumatic push-in fitting used to connect air tubing directly to a female-threaded port. A hex socket in the center allows it to be tightened with a hex key, making it particularly suitable for densely packed installations where wrench space is limited. The fitting body is typically made of nickel-plated brass and features a release ring for quick insertion and removal of tubing. The release ring is available in gray, orange-red, or black. Sizes are identified by tubing outside diameter codes 03, 23, 04, and 06 (corresponding to tubing diameters of 3, 4, 6 mm, etc.). Thread sizes include M3×0.5, M5×0.8, M6×1.0, M8×1.0, and 1/8". The external hex is approximately 3 mm across flats, the fitting length is 12.0~14.7 mm, and the effective hex socket length is 3.1~5.1 mm. To install, insert the tubing fully and pull it back to confirm it is locked. To remove it, press the release ring and pull out the tubing. The fitting is reusable.

KJH Series Equal Straight Union
The KJH series equal straight union is a push-in fitting for connecting two tubes of the same diameter in a straight line in pneumatic piping. Both ends feature push-in collets: an internal retaining clip locks each inserted tube in place, while a sealing ring provides a seal. The fitting can be quickly assembled and disconnected without tools, simplifying air line installation and maintenance. The catalog lists sizes for tube diameters of Φ3, Φ3.2 and Φ4, with corresponding models KJH03-04, KJH23-04, KJH03-06, KJH23-06 and KJH04-06. Fitting outer diameters range from 8.6~11.8mm and overall lengths from 26.3~28.7mm. The product is suitable for small-diameter pneumatic circuits carrying non-corrosive fluids such as air and water. It is commonly used with similar push-in fittings on the same catalog page, such as KJL male connectors and KJW extended male connectors, to form a complete pneumatic piping system.

KJL Series Male Thread Tube Fittings
KJL series male thread tube fittings are push-in threaded connectors for pneumatic systems. They have a male thread at one end, commonly in M3, M5, M6 or R1/8 sizes, and a push-in connection at the other. They connect tubing with an outside diameter of 3–4 mm directly to female-threaded ports on valves, cylinders or equipment, allowing quick installation and removal while providing a reliable seal. Model numbers identify the combination of tube size (outside diameter) and thread size. The catalog lists two key dimensions for each model—the fitting outside diameter Φ and length L—to help check installation clearance and interference in confined spaces. The fitting body is typically made of nickel-plated brass or engineering plastic, offering pressure and corrosion resistance with low flow resistance. These fittings are widely used in pneumatic circuits for automated equipment, packaging machinery and electronics assembly lines.