Pneumatic Components — Page 21

DMF-Z Series Right-Angle Solenoid Pulse Valves
The DMF-Z series comprises right-angle solenoid pulse valves, also known as submerged or embedded valves. A solenoid pilot controls the opening and closing of the diaphragm assembly to deliver an instantaneous pulse of compressed air. These valves are widely used for programmed pulse blowing in baghouse dust collectors, pulse-jet cleaning systems, and pneumatic conveying equipment. The valve body is die-cast from ADC aluminum alloy, the pilot assembly is made of 430FR stainless steel, and the large and small springs are made of 321 stainless steel. The diaphragm assembly and O-rings are made of imported nitrile rubber. Features include good flow capacity, low pressure loss, fast response, oil and wear resistance, and long service life, making the valves suitable for applications with relatively low air supply pressure. Nominal diameters range from Φ20 to Φ102. Outlet connections are available in threaded (G1″, G1 1/2″, etc.) and flanged (Ø50–Ø102) types. Working pressure is typically 0.2–0.6 MPa. Single- or double-diaphragm configurations can be selected to suit the dust collector's air manifold specifications.

DMF-ZM Series Solenoid Pulse Valves (Nut Connection)
The DMF-ZM series consists of nut-connection solenoid pulse valves used primarily in baghouse dust collector cleaning systems. The valve body is made of ADC aluminum alloy, the pilot head assembly of 430FR stainless steel, and the springs and fasteners of 321 stainless steel. The diaphragm is made of imported nitrile rubber, and the coil uses high-quality enamelled wire. Nominal diameters are Φ20, Φ25 and Φ40, with port sizes of 3/4″, 1″ and 1 1/2″. The valves have 1~2 diaphragms, inlet/outlet diameters of Φ27~Φ48 mm, and weights of approximately 0.9~2.0 kg. A solenoid pilot controls the opening and closing of the diaphragm, producing short, powerful pulses of compressed air for cleaning dust collector filters. The nut connections attach the valve to the air reservoir and blowpipe during installation.

DMF-T Series Straight-Through Solenoid Pulse Valves
The DMF-T straight-through solenoid pulse valve has aligned inlet and outlet centerlines at an angle of 180°. The inlet connects to the air reservoir and the outlet to the blowpipe. Its unobstructed, low-resistance airflow path delivers cleaning pulses suited to pulse-jet cleaning systems in baghouse and cartridge dust collectors. The valve body, upper cover, middle cover and small passage cover are die-cast from ADC aluminum alloy. The pilot assembly is made of 430FR stainless steel, while the large and small springs and fasteners are made of 321 stainless steel. The general-purpose diaphragm assembly and diaphragm assembly use imported nitrile rubber (NBR), and the coil is made of high-quality enameled wire. Nominal diameters range from Φ20 upward, and the accompanying nut-type DMF-ZM subseries (Φ20/Φ25/Φ40) meets different pulse-jet airflow requirements.

MCF Series Pulse Valves
MCF series pulse valves are high-performance diaphragm valves for dust collectors and cleaning systems, with female threaded inlet and outlet ports. They are available in electrically controlled versions (with a solenoid pilot valve, designated MCF/CA) and pneumatically controlled versions (without a pilot valve, designated RCA). The T series features 90° right-angle valves. The valve body, upper cover, and intermediate cover are die-cast ADC aluminum alloy; the pilot head assembly is 430FR stainless steel; the large and small springs are 321 stainless steel; the fasteners are 302 stainless steel; and the diaphragm is imported nitrile rubber, with fluororubber available as an option. Configurations include right-angle (1), immersed (MM), threaded (DD), and flanged (FS). Standard nominal sizes are 15, 20, 25, 35, 45, 50, 62, and 76mm, with corresponding 1/2"~3" threads. Operating pressure is 0.3~0.8MPa, and the medium is clean air. Voltage options are AC220V/AC110V/AC24V/DC24V, with an IP65 protection rating. The temperature range is -40~82℃ for nitrile diaphragms and -29~232℃ for fluororubber diaphragms. Relative humidity is ≤80%, and diaphragm life is approximately one million pulses or three years. Widely used with filter bags, filter cartridges, flat belts, and ceramic

MCF Series Solenoid Pulse Valves
MCF series solenoid pulse valves are diaphragm-type pulse jet valves used primarily in baghouse dust collector cleaning systems. A solenoid pilot controls the opening and closing of the diaphragm to release an instantaneous pulse of compressed air. Nominal valve diameters range from Φ25 to Φ102, with outlet connections including G1″, G1 1/2″, Φ50, Φ62, Φ76, Φ90 and Φ102. Weights range from 0.8 to 5.65 kg and flow coefficients from 26.24 to 268.29. The valves are compatible with 1″ to 4″ pulse jet piping. They use common diaphragm assemblies, and wear parts such as pilot heads, springs and O-rings are replaceable. Catalog dimensional drawings cover models MCF15 through MCF40 and MCF50 through MCF76. Values in the “number of diaphragms” column of the model table should be treated as port sizes in inches.

MCF-DD Series Right-Angle Pulse Valve
The MCF-DD series pulse valves are high-performance diaphragm valves with double-dresser inlet and outlet ports. The DD type features a 90° right-angle design and can be mounted directly on the air manifold for pulse-jet cleaning systems in baghouse dust collectors. Options include electrically controlled pulse valves with a solenoid pilot valve or pulse valves without a pilot valve. Key specifications include inlet and outlet inside diameters (25~40mm), port thread sizes (1", 1 1/2"), diaphragm count and flow coefficient. The valve body is made of ADC aluminum alloy; the universal diaphragm assembly and diaphragm assembly use imported nitrile rubber; the large and small springs are made of 321 stainless steel; the fasteners and sealing rings are made of 302 stainless steel; and the pilot head assembly is made of 430FR stainless steel. The coil uses high-quality enameled wire. In addition to the 25DD and 45DD, the series includes models for a range of blowpipe diameters (50/62/76/89/90/102mm, etc.), which can be selected according to the air manifold position and mounting hole dimensions.

AMF Series Pulse Valves
AMF series pulse valves are solenoid pulse valves designed for pulse-jet cleaning systems in baghouse dust collectors. Their right-angle valve body provides high flow, long service life and rapid opening and closing, ensuring reliable, stable operation. The body is die-cast ADC alloy, with a 430FR stainless steel pilot assembly, a 321 stainless steel main spring, 302 stainless steel fasteners and an imported nitrile rubber/TPE diaphragm assembly. There is no threaded shaft to seize, making maintenance quick and easy. Operating pressure is 0.4~0.6MPa, and the operating medium is clean air. Three standard voltages are available: DC24V (0.8A), AC110V (0.46A) and AC220V (0.23A). Relative air humidity is ≤85%, and the protection rating is IP65. Temperature ratings are class 1 (-25~80℃), class 2 (-25~150℃) and class 3 (-25~230℃). Bore sizes range from 25~75mm, with pipe connections from 3/4" to 3". Configurations include A right-angle and B drip-type, with the optional J improved design.

MCF FS Series Solenoid Pulse Valves
The MCF FS series is a second generation of ultra-high-performance solenoid pulse valves, also known as pulse cleaning valves, designed primarily for pulse-jet cleaning systems in baghouse dust collectors. The valve inlet has a flange connection, while the outlet slips directly onto the blow pipe for easy installation and removal. Options include an electrically controlled pulse valve with a solenoid pilot (CA) or a pneumatically controlled pulse valve without a pilot. The FS type has a straight-through valve design. The operating pressure range is 0.4~0.6MPa. Diaphragms are available in nitrile rubber (Nitrile, -40℃~82℃) or fluororubber (Viton, -29℃~232℃) for different temperature conditions. Common models include MCF25FS (1 diaphragm, flow coefficient 22/25) and MCF45FS (2 diaphragms, flow coefficient 52/61). The inlet and outlet connection pipe inside diameters and the blow pipe outside diameter increase with model size.

EX Series Explosion-Proof Coils
EX series explosion-proof coils are solenoid coils designed for use with various explosion-proof solenoid valves in environments containing explosive gases. The series includes EX1320, EX1420, and EX1620 models, with EX1320 available in sizes 11, 12.5, and 13.7. Standard voltages are AC220V and DC24V, with corresponding standard power ratings of AC25VA and DC15W. The coils use cable leads for connection, carry the explosion-proof marking Exmb11T4, and have explosion-proof certificate CNEX17.3311X. They can be used with a wide range of explosion-proof solenoid valves. When selecting a coil, match the model to the valve body interface, voltage, and power requirements, and verify the explosion-proof rating and temperature class for the operating environment.

AC Series Air Preparation Units
AC series air preparation units filter, regulate and lubricate compressed air, combining a filter, regulator and lubricator in one assembly. AC1010~AC5010 models are two-piece variants combining a filter regulator and lubricator. The units have a proof pressure of 1.5MPa, a maximum operating pressure of 1.0MPa and an ambient and fluid temperature range of 5~60℃. Standard filtration is 25μm, with 5μm and 50μm options. The pressure adjustment range is 0.05~0.85MPa, and the regulator is relieving type. The bowls are polycarbonate, with protective guards on AC3000-5000 but not AC2000. No. 1 turbine oil ISO VG32 is recommended. Models range from AC1000~AC5000 and AC1010~AC5010, with port sizes M5~1, rated flow rates of 90~5000 L/min and a choice of Rc/NPT threads.

AC Series Air Preparation Units
The AC series combines a filter (AF), regulator (AR), and lubricator (AL) in a three-piece air preparation unit for filtering, pressure regulation, and oil mist lubrication of compressed air upstream of pneumatic systems. Key specifications: proof pressure 1.5MPa (15kgf/cm²); maximum operating pressure 1.0MPa (10kgf/cm²); ambient and fluid temperature 5-60℃; standard filtration rating 25μm (5μm and 50μm also available); recommended oil: turbine oil No. 1 ISO VG32; bowl material: polycarbonate. AC1000 and AC2000 have no bowl guard; AC3000-5000 have bowl guards. Pressure adjustment range: 0.05-0.85MPa (0.5-8.5kgf/cm²); valve type: relieving. Six sizes are available by bowl and port size: AC1000, AC2000, AC2500, AC3000, AC4000, and AC5000. Port sizes range from M5 to 3/4, with Rc and NPT threads also available. Optional Y10L/Y20L/Y30L/Y40L/Y50L

AC Series Air Preparation Units
AC series air preparation units combine an AF filter, an AR regulator (relieving type), and an AL lubricator to filter, regulate, and lubricate compressed air. They are widely used with pneumatic actuator systems. Proof pressure is 1.5MPa, maximum operating pressure is 1.0MPa, and ambient and fluid temperature is 5~60℃. Standard filtration rating is 25μm, with 5 and 50μm options available. No. 1 turbine oil ISO VG32 is recommended, and the bowl is made of polycarbonate. The pressure adjustment range for AC2000~AC5000 is 0.05~0.85MPa. Models range from AC1000~AC5000, with port sizes M5, 1/8, 1/4, 3/8, 1/2, and 3/4. Rc and NPT threads are also available.

AL Series Lubricators
The AL series lubricator is the lubrication component of the AC series three-piece air preparation unit. It atomizes lubricating oil into compressed air to lubricate downstream pneumatic components such as cylinders and pneumatic valves. It can be combined with AF series filters and AR series regulators, and is available in AL1000, AL2000, AL3000, AL4000, and AL5000 sizes. The listed air preparation specifications include a proof pressure of 1.5MPa, a maximum operating pressure of 1.0MPa, an ambient and fluid temperature range of 5-60℃, recommended No. 1 turbine oil ISO VG32, and a polycarbonate bowl. AC2000 has no bowl guard, while AC3000-5000 have bowl guards. The regulator pressure range is 0.05-0.85MPa, and the regulator is a relieving type. The 25μm filtration rating applies to the filter, with 5 and 50μm options also available.

AF Series Air Filters
AF Series air filters are air preparation components for pneumatic systems, designed to remove moisture and contaminants from compressed air. Available in five sizes—AF1000, AF2000, AF3000, AF4000 and AF5000—they cover port sizes from M5 to 1 inch, with Rc and NPT threads also available. Rated flow is approximately 110–7000 L/min. Some sizes can be fitted with an automatic drain (models B240/B340/B440/B540/B640) for automatic water removal. Flow is tested at a supply pressure of 0.7MPa and a set pressure of 0.5MPa. Suitable for air purification and moisture removal in a wide range of pneumatic circuits, these filters serve as the filtration unit in a standard three-piece air preparation assembly.

AR Series Pressure Regulators
AR series pressure regulators are relieving-type pneumatic pressure control components designed to reduce compressed air pressure and maintain a stable output pressure in air preparation systems. The guaranteed proof pressure is 1.5MPa, the maximum operating pressure is 1.0MPa, and the pressure adjustment range is 0.05~0.85MPa (2000~5000 series). The ambient and fluid temperature range is 5~60℃. Models range from AR1000~AR5000, with port sizes of M5, 1/8, 1/4, 3/8, 1/2, 3/4 and 1, rated flow rates of 100~8000L/min, and weights of 0.08~1.19kg. The standard configuration includes brackets (2) and a pressure gauge, with gauge port sizes of 1/16~1/4. Rc and NPT port threads and filtration ratings of 5 and 50μm are also available.

AL Series Air Lubricators
The AL series air lubricator uses the Venturi principle to atomize lubricating oil and mix it with compressed air, lubricating downstream pneumatic components such as cylinders and air motors. Proof pressure is 1.5MPa (15kgf/cm²), maximum operating pressure is 1.0MPa (10kgf/cm²), and ambient and fluid temperatures are 5~60℃. The recommended oil is No. 1 turbine oil ISOVG32, and the bowl is made of polycarbonate. The AL2000 has no bowl guard; the AL3000~5000 have bowl guards. Five sizes are available: AL1000, AL2000, AL3000, AL4000, and AL5000. Port sizes range from M5~1, rated flow from 95~7000 L/min, minimum flow for oil dripping from 4~190 L/min, bowl capacity from 7~130 cm³, and weight from 0.07~1.08 kg. Optional B240~B640 brackets are available (2 pieces). Flow rates in the table are measured at a supply pressure of 0.5MPa, an oil drip rate of 5 drops/minute, and an ISOVG32 oil temperature of 20℃. Rc and NPT port threads are also available.

AL Series Lubricators
AL series lubricators provide oil-mist lubrication in compressed air lines, atomizing No. 1 turbine oil (ISO VG32) and delivering it to downstream pneumatic components to reduce wear. They use polycarbonate bowls; AL3000~AL5000 models have protective covers, while AL2000 models do not. Proof pressure is 1.5MPa, maximum operating pressure is 1.0MPa, and ambient and fluid temperatures are 5~60℃. Port sizes range from M5 and 1/8~1 inch, with rated flow rates of 95~7000 L/min, minimum oil drip flow rates of 4~190 L/min, and bowl capacities of 7~130 cm³. Model numbers combine the AL body size and port code, as in AL2000-01 and AL5000-10. B240/B340/B440/B540/B640 brackets are available as options.

AW Series Filter Regulators
AW series filter regulators combine air filtration and pressure regulation for pneumatic systems. They have a proof pressure of 1.5MPa, a maximum operating pressure of 1.0MPa, and an ambient and fluid temperature range of 5-60℃. The standard filtration rating is 25μm, with 5μm and 50μm options, and the bowl is made of polycarbonate. The AW2000 has no protective cover, while the AW3000-5000 have protective covers. The AW2000-5000 have a pressure adjustment range of 0.05-0.85MPa and are relieving-type valves. Port sizes range from M5 to 3/4-1. Models include AW1000, AW2000, AW3000, AW4000, AW4000-06, and AW5000. The dimension table provides A-P overall and mounting dimensions for each model. These units are suitable for air preparation in various pneumatic circuits.

IR Series Precision Pressure Regulators
IR series precision pressure regulators provide precise pressure reduction and stabilization of compressed air in pneumatic systems. They are compact and lightweight, with accurate pressure settings. The adjustment screw thread pitch has been reduced from the conventional 0.75mm to 0.5mm for finer adjustment. They can be mounted independently with a bracket or directly combined with AF and AFM modular filter units. The standard model supports panel mounting, and the pilot exhaust port is separate from the main exhaust port. Special-order models are available for use in clean environments. Compared with the conventional IR200 precision regulator, the IR3000 offers higher output and relief flow rates. Pressure setting ranges include 0.005-0.2MPa, 0.01-0.4MPa and 0.01-0.8MPa. Repeatability is within ±0.5% of full scale, ambient and fluid temperatures are -5~60℃ (no freezing), maximum operating pressure is 1.0MPa, and the pressure port size is Rc1/8. An air filter (AF) and an oil mist separator (AM, AFM) must be installed on the supply side.

GF Series Water Separators
GF series water separators remove moisture and filter solid particles from compressed air lines. A copper flow-guiding structure induces rotation in the airflow, improving liquid separation and reliably filtering solid particles. The separators feature low pressure drop, high water separation efficiency and a large bowl capacity. Filtration ratings of 5μm and 40μm are available, with manual, differential-pressure or automatic drainage. An optional mounting bracket is also available. The body is aluminum alloy, the O-ring is NBR, the flow guide is high-viscosity POM, and the filter element is sintered bronze particles (40μm). The filter bowl is aluminum alloy on the GF600 and PC on other models. The level gauge protective cover is SPCC, the level gauge sealing gasket is fluororubber, and the level gauge inner cover is PC.

GR Series Pressure Regulators
GR series pressure regulators regulate and stabilize pressure in pneumatic systems. An integrated square pressure gauge saves installation space, while an external round gauge is also available. A pressure-locking mechanism prevents external interference from affecting the set pressure, and a balanced regulating mechanism provides greater stability with minimal drift. The series includes GR200, GR300, GR400 and GR600 models, with port sizes from PT1/8 to PT1. The standard operating pressure range is 0.05~0.9MPa (20~130psi), the proof pressure is 1.5MPa (215psi), and the operating temperature range is -20~70℃. In addition to the standard version, options include the L low-pressure version, with or without a gauge, square or round gauges, different scale units and filtration ratings. Custom pressure specifications are also available (maximum adjustable pressure 0.4MPa).

GL Series Lubricator
The GL series lubricator is an air preparation device that delivers small amounts of oil mist into compressed air to protect downstream pneumatic components such as cylinders and solenoid valves. Its rounded, sealed drip mechanism provides smooth, reliable oil-flow adjustment. The adjustment knob rotates one full turn, with oil flow varying approximately linearly across the scale, allowing the flow rate to be estimated from the setting. A specially designed drip nozzle creates negative pressure at the outlet, enabling oil delivery at low airflow rates. The large oil bowl can be refilled without shutting down the system, and the unit can be mounted using a bracket. The working medium is air, with an operating pressure range of 0.05~0.9MPa (7~130psi), a proof pressure of 1.5MPa (215psi), and an operating temperature of -20~70℃. Port sizes range from PT1/8~PT1. Oil bowl capacity is 25CC or 75CC, and weight is 130g or 360g. ISO VG32 or equivalent oil is recommended. The body is aluminum alloy; the GL600 oil bowl is aluminum alloy, while the bowls for other sizes are PC.

GFR Series Filter Regulators
The GFR series filter regulator is a key component of air preparation (FRL) systems, combining filtration and pressure regulation to clean compressed air and set it to the required pressure. A recessed square pressure gauge saves installation space, while an external round gauge is available as an option. A self-locking pressure adjustment mechanism prevents external interference from changing the set pressure, and a balanced regulation mechanism provides stable adjustment, minimal drift and excellent pressure characteristics. A unique flow-guiding structure creates a controlled swirl, separating and draining moisture from the air more effectively. Filtration ratings of 5μm and 40μm are available, along with manual, differential-pressure and automatic drain options. A mounting bracket is also available. In addition to the standard version, a low-pressure version is available with a maximum adjustable pressure of 0.4MPa. The range includes the GFR200, GFR300, GFR400 and GFR600 series, classified by port size.

GFC Series Air Filters
GFC series air filters provide air preparation for pneumatic systems, with quick, secure connections for easy installation and use. They offer stable, repeatable pressure regulation and efficiently remove moisture and solid particles from compressed air. Three drain options are available: manual, differential pressure and automatic. Filtration ratings are 40μm or 5μm, with optional square or round pressure gauges and a reverse-flow valve. Port sizes range from PT1/8 to PT1, operating pressure is 0.15~0.9MPa, and operating temperature is -20~70℃. Filter bowl capacity is 10CC/40CC and drain capacity is 25CC/75CC. The filters can be combined with GFR series indicating components and GL series lubricators to form a three-piece air preparation unit.

GFR Series Pressure Regulator
The GFR series pressure regulator is the pressure control unit in the air preparation three-piece assembly (GFC filter + GFR pressure regulator + GL lubricator). It reliably reduces compressed air line pressure to a set value with good repeatability and can be quickly and securely assembled with GFC series filters and GL series lubricators of the same port size. The working medium is air. Port sizes include PT1/8, PT1/4, PT3/8, PT1/2, PT3/4 and PT1, across four sizes: 200/300/400/600 (port codes 06/08/10/15/20/25). Common parameters for the three-piece assembly are: operating pressure range approximately 0.15~0.9 MPa (automatic and differential-pressure drain types), operating temperature -20~70℃, filtration rating 40μm or 5μm, and ISO VG 32 or equivalent oil for filter element cleaning. Square or round gauges are available with scales in MPa, psi or bar. A reverse flow valve is also optional.

GL Series Lubricators
GL series lubricators are lubrication components for pneumatic air preparation systems. Used with GFC series filters, they provide a consistent oil mist to lubricate downstream pneumatic actuators. The catalog includes four size ranges: GL200, GL300, GL400, and GL600, with port sizes including PT1/8, PT1/4, PT3/8, PT1/2, PT3/4, and PT1 to meet the needs of air circuits with different flow rates. Each model corresponds to a GFC filter of the same size (for example, GL200-06 corresponds to GFC200-06), making it easy to assemble a matching air preparation unit. Select the appropriate size based on the air line connection, flow rate, and available installation space.

GC Series Air Lubricators
GC series air lubricators provide lubrication and air purification for pneumatic systems. The range comprises four sizes—GC200, GC300, GC400 and GC600—with port sizes from PT1/8 to PT1. The corrosion-resistant oil reservoir seal provides stable, reliable oil-feed adjustment. The oil-feed adjustment tube threads are standardized, and oil delivery follows an approximately linear scale, allowing the flow rate to be estimated from the setting. Oil can be added without shutting down the system. A special reservoir design creates negative pressure at the oil outlet and requires a low initial flow rate. Pressure regulation is stable and highly repeatable, while connections are quick and secure and installation is precise. Drain options include differential-pressure drain (blank), M manual drain and A automatic drain. The units also efficiently remove moisture and solid particles. The ordering code combines the series, port size, drain type, pressure gauge code, scale unit and oil filtration accuracy in sequence. Scale units are available in MPa, psi or bar.

AC/BC Series FRL Units
AC/BC series FRL units (air preparation units) combine a filter (AF/BF), pressure regulator (AR/BR), and lubricator (AL/BL) to clean, regulate, and lubricate the air supply in pneumatic systems. AC is the compact series, and BC is the medium-size series. Port sizes include G1/8", G1/4", G3/8", and G1/2". Filtration rating: 40μm; pressure adjustment range: 0.05~0.85MPa; maximum adjustable pressure: 0.95MPa; proof pressure: 1.5MPa; operating temperature: 5~60℃; filter bowl capacity: 15cc; lubricator bowl capacity: 25cc. The body is die-cast aluminum alloy, and the bowls are PE. ISOVG32 or equivalent lubricating oil is recommended. Weight: approximately 0.7kg. The ordering code consists of the model (AC/BC), size specification (1500/2000/3000/4000), and drain type (D).

AFC/BFC Series Two-Piece Air Preparation Units
AFC/BFC series two-piece air preparation units combine a filter regulator (AFR/BFR) with a lubricator (AL/BL). They filter and reduce the pressure of compressed air and provide oil-mist lubrication, supplying cylinders, pneumatic valves and other downstream actuators with clean, pressure-regulated, oil-misted compressed air. AFC units are compact (port size G1/8"~G1/4"), while BFC units are medium-sized (port size G1/4"~G1/2"). Key specifications: operating fluid: air; filter element rating: 40μ; pressure adjustment range: 0.05~0.85MPa; maximum adjustable pressure: 0.95MPa; proof pressure: 1.5MPa; operating temperature: 5~60℃. Compact units have a 15cc filter bowl and a 25cc oil bowl; medium units have a 60cc filter bowl and a 90cc oil bowl. ISOVG32 or equivalent lubricating oil is recommended. The body is die-cast aluminum alloy, the bowls are PE, and the protective bowl guards are iron. Weight is approximately 0.5kg for compact units and 0.7kg for medium units.

AFR Series Filter Regulators
The AFR series filter regulator is a pneumatic air preparation component used to filter compressed air and regulate its pressure. The series includes AFR1500, AFR2000, BFR2000, BFR3000, and BFR4000 models, with port sizes from G1/8" to G1/2". The operating fluid is air, the pressure adjustment range is 0.05~0.85MPa, the maximum adjustable pressure is 0.95MPa, the proof pressure is 1.5MPa, and the operating temperature range is 5~60℃. Filter bowl capacities are 15cc for AFR1500/AFR2000 and 60cc for BFR2000/BFR3000/BFR4000, with respective weights of 0.26kg and 0.40kg. The product offers stable pressure regulation and high filtration precision, making it suitable for a variety of pneumatic systems.

BFR Series Filter Regulators
The BFR series filter regulator combines air filtration and pressure regulation in a single air preparation unit. It cleans compressed air and delivers a stable, preset pressure to pneumatic systems. The operating fluid is air, and port sizes include G1/4", G3/8", and G1/2". The regulating pressure range is 0.05~0.85MPa, the maximum adjustable pressure is 0.95MPa, the proof pressure is 1.5MPa, and the operating temperature range is 5~60℃. The filter bowl has a capacity of 60cc, and the unit weighs approximately 0.40KG. Compared with the AFR series on the same page (AFR1500/AFR2000, G1/8" and G1/4" ports, 15cc filter bowl, and 0.26KG weight), the BFR series has larger ports and a larger collection bowl, making it suitable for pneumatic circuits with higher flow requirements.

LFR Series Filter Regulators
The LFR series filter regulators combine filtration and pressure regulation for compressed air preparation. They remove moisture and particulate contaminants from compressed air and provide stable operating pressure for downstream pneumatic circuits. They are available with or without a pressure gauge. The series comes in four sizes: Micro, Mini, Midi and Maxi. Air connections include M5, M7, QS4 and QS6 push-in ports, as well as 1/8, 1/4, 3/8, 1/2, 3/4 and 1 inch threaded ports. The units are pipe-mounted and must be installed within ±5° of vertical. Filtration ratings are 5μm and 40μm, with a maximum filtered particle size of approximately 0.2~0.4μm. Pressure adjustment ranges are 0.5~7 bar and 0.5~12 bar, with pressure set by turning the knob. Preset pressure gauges are available, with different gauges corresponding to sizes such as M5, G1/8 and G1/4. Condensate drain options are manual, semi-automatic (H) and fully automatic (A). Maximum condensate capacities are 3/22/43/80 cm³ for Micro/Mini/Midi/Maxi, respectively.

LF Series Air Filters
The LF series comprises air filters in the SNS air preparation range. They use a sintered filter element with a water separator to remove moisture, oil mist and solid particles from compressed air, supplying clean air to downstream pneumatic components. Three frame sizes are available: MINI (small), MIDI (medium) and MAXI (large), with G1/8, G1/4, G3/8, G1/2, G3/4 and G1 port threads. Filtration ratings are 40μm and 5M (5μm). Drain options include a manual drain valve (maximum working pressure 16bar) and a type A automatic drain valve (working pressure 1.5~12bar). Maximum condensate capacity is 22ml, the operating temperature is 0~60℃, and installation must be vertical within ±5°. Pipe or bracket mounting is supported. The working medium is lubricated or unlubricated compressed air, and the filter bowl and body are made primarily of plastic and die-cast aluminum.

LR Series Pressure Regulators
The LR series pressure regulators are SNS Automation air preparation components designed to reduce and stabilize pressure in filtered compressed air lines, with or without lubrication. They are available in MINI, MIDI and MAXI sizes, with G1/8, G1/4, G3/8, G1/2, G3/4 and G1 ports. They support in-line, bracket or panel mounting in any orientation. Working pressure is 12bar, with an adjustment range of 1-16bar; the LR-...-7- model has a range of 0.5-7bar (the catalog also specifies 0.5-12bar/0.5-7bar). Operating temperature is 0-60℃. Body materials include plastic and die-cast aluminum, with nitrile rubber seals and a POM pressure adjustment knob. Diaphragm and piston designs are available, and OMA series pressure gauges can be fitted.

OMA Series Pressure Gauges
OMA series pressure gauges are mechanical dial gauges for pneumatic systems. They are installed in the pressure port of a pressure regulator or in a pneumatic circuit to provide a visual indication of air pressure. Dial diameters are available in 40mm and 50mm. Pressure ranges are 0-16bar for circuits with a working pressure of 0-12bar and 0-10bar for circuits with a working pressure of 0-7bar. The G1/8 or G1/4 threaded connection screws directly into the valve body's pressure port. The model code follows the format OMA-dial diameter-pressure range-connection size. For example, OMA-40-16-1/8 indicates a 40mm dial, a 0-16bar range, and a G1/8 connection; OMA-50-10-1/4 indicates a 50mm dial, a 0-10bar range, and a G1/4 connection. These gauges are commonly used with air preparation components such as LR series pressure regulators.

LOE Series Lubricator
The LOE series consists of automatic variable-restriction oil-mist lubricators for lubricating pneumatic components in compressed air lines. They are available in three sizes, MINI, MIDI and MAXI, according to port size and overall dimensions. The operating medium is compressed air, and the automatic variable-restriction design adjusts oil delivery according to flow. The units can be pipe-mounted or bracket-mounted and must be installed within ±5° of vertical. Maximum operating pressure is 16bar, operating temperature range is 0~60℃, and maximum oil/condensate capacity is 22ml. The minimum flow required for mist generation is approximately 3 l/min for MINI and 6 l/min for MAXI. Standard rated flows are 1300/2300/2700, depending on size. The body is die-cast aluminum; the oil bowl and sight glass are made of PC and fitted with an aluminum alloy protective guard. Seals are nitrile rubber. ISO VG 32 or equivalent lubricating oil is recommended. Port sizes include G1/8", G1/4", G3/8", G1/2", G3/4" and G1". Common models combine these port sizes with the MINI/MIDI/MAXI sizes.

UFR/L Series Two-Piece Air Preparation Units
The UFR/L series two-piece units are part of the SNS U series of air preparation components, providing compressed air filtration, pressure regulation and oil mist lubrication. Port sizes include 1/4, 3/8, 1/2, 3/4 and 1 inch. Filtration ratings of 40um or 5um are available. The pressure range is 0.1-1.0MPa, proof pressure is 1.5MPa, and ambient temperature range is -10-60℃. ISO-VG32 oil is recommended. When ordering, select the appropriate combination of port thread, filtration rating and drain type. These units are suitable for air preparation circuits in automated equipment.

SFC Series Two-Piece Air Preparation Units
The SFC series two-piece air preparation unit combines filtration, pressure regulation, and lubrication for pneumatic systems. Its compact design offers high flow, stable output pressure, and easy installation. A pressure gauge and mounting bracket are included. The lubricator can be refilled without interrupting the air supply, and all sizes feature a bowl guard. Nominal sizes 200, 300, and 400 correspond to port sizes G1/4", G3/8", and G1/2", respectively. Drain options include differential pressure drain (blank), automatic drain (A), and standard manual drain (□). Proof pressure is 1.5 MPa, maximum operating pressure is 1.0 MPa, and ambient and media temperature range is 5~60 ℃.

QTY Series Pressure Regulators
The QTY series consists of pressure regulators (pressure-reducing valves) for pneumatic systems. They reduce high supply pressure and stabilize it at a set value for downstream pneumatic circuits. The series includes 8 sizes (QTY-8 ~ QTY-50), with common port threads including G1/4", G3/8", G1/2", G3/4" and G1". The operating ambient temperature range is 5~60℃, nominal input pressure is 1.0MPa, maximum input pressure is 0.63MPa, and regulating range is 0.05~0.63MPa, allowing stable regulation at low pressures. Valve body outside diameters include Φ64, Φ104/Φ105 and Φ120/Φ130; overall length L ranges from 173mm to 280mm, and mounting height A is 80/108/130mm. The catalog also provides air flow data at an inlet pressure of 1MPa and an outlet pressure drop of 0.05MPa. Flow increases from 680L/min to 3200L/min as nominal bore size increases, helping users select a valve matched to the air consumption of downstream actuators.

QSL Series Air Filter and Water Separator
The QSL series air filter and water separator cleans compressed air by removing moisture and solid particles. It is typically installed upstream in pneumatic systems. Ambient temperature: 5-60℃; nominal inlet pressure: 0.63MPa; filtration rating: 50-70μm; water separation efficiency: ≥85%. Connection threads include G1/4, G3/8, G1/2, G3/4 and G1, with models ranging from QSL-8 to QSL-50. The pressure drop–airflow chart shows airflow rates at different inlet pressures. Overall dimensions are labeled A, D, D1, D2, L0, L1 and L.

QIU Series Air Lubricators
QIU series air lubricators lubricate pneumatic systems by atomizing oil and delivering it to actuators with compressed air. The catalog covers QIU-8, QIU-10, QIU-15, QIU-20, QIU-25, QIU-35, QIU-40, and QIU-50 models. They operate at ambient temperatures of 5~60℃ with a nominal inlet pressure of 1.0MPa and can be refilled without shutting down. Connection sizes range from G1/4"~G1". The catalog also lists overall dimensions and pressure drop versus airflow data for each model (the minimum airflow for misting is approximately 75~850 L/min at an inlet pressure of 0.4MPa).

QFLH Series Air Filters
QFLH series air filters are air preparation components manufactured by SNS Automation (Ningbo) Group Co., Ltd. Installed in compressed air lines, they remove moisture, oil mist, and solid particles to protect downstream pneumatic equipment such as cylinders and solenoid valves. The series includes eight models from QFLH-08 to QFLH-50, with port sizes from G1/4 to G2 to meet the needs of both low- and high-flow air systems. Filter elements are available with filtration ratings of 20μm or 40μm. The working pressure range is 0.15~4.0MPa, the maximum input pressure is 4MPa, the operating temperature range is 5~80℃, and the working fluid is air. The housings have standard threaded ports, with each model's port size matched to its flow capacity. They are suitable for pre-filtration and point-of-use protection in general industrial compressed air systems.

QTYH Series Air Filters
QTYH series air filters clean the air supply in pneumatic systems by removing solid particles and contaminants from compressed air, protecting downstream components such as solenoid valves and pneumatic cylinders. The series is available in eight sizes: 08, 10, 15, 20, 25, 32, 40 and 50, with corresponding port sizes G1/4, G3/8, G1/2, G3/4, G1, G11/4, G11/2 and G2. They cover applications from low-flow air lines serving individual machines to high-flow main air lines. The working medium is air, and filter elements are available in 20μm and 40μm grades for general filtration. The working pressure range is 0.15-4.0MPa, the maximum inlet pressure is 4MPa, and the operating temperature range is 5-80℃. The model code consists of QTYH followed by a two-digit size code, with each size code corresponding to a port size. Select a model to match the pipe diameter and required flow rate.

HAD Series Automatic Drains
The HAD series consists of float-operated automatic drains that discharge condensate from compressed air systems, including air compressors, air receivers and filters. When the bowl is not pressurized, the float drops under its own weight, the valve closes the chamber opening, and the spring pushes the piston down, allowing condensate to flow out through the drain passage. When the pressure in the bowl exceeds 1kgf/cm², the piston moves upward against the spring, closing the drain passage and isolating the bowl from the outside. Once condensate reaches a certain level, buoyancy raises the float, opening the inner chamber port and allowing pressure into the chamber. Pressure and the spring then push the piston down, discharging condensate through the drain tube. Specifications include a proof pressure of 1.0~1.5MPa, a maximum operating pressure of 1.0MPa, an operating pressure range of 0.15~1.0MPa, ambient and fluid temperatures of 5~60℃, a 1/2 inlet port, a 3/8 or 1/2 drain port, and a weight of 0.62~0.91kg. The HAD400-04 includes a manual switch. The body is die-cast aluminum and the seals are NBR. For installation, use a drain tube with an inside diameter of at least Φ10mm and a length no greater than 5m; it must not bend upward. The compressor power rating must be greater than 3.7kW.

QFRH Series Air Filters
QFRH series air filters are air preparation components that remove solid particles and condensate from compressed air, providing clean air to downstream pneumatic components such as cylinders and solenoid valves. The series comprises 7 nominal sizes: QFRH-10, QFRH-15, QFRH-20, QFRH-25, QFRH-32, QFRH-40 and QFRH-50, with corresponding port sizes of G1/4, G3/8, G1/2, G3/4, G1, G1-1/4 and G1-1/2 (larger sizes up to G2). Filter elements are available in 20μm or 40μm ratings to suit downstream cleanliness requirements. The operating pressure range is 0.05~3.5MPa, the maximum inlet pressure is 4MPa, and the operating temperature range is -25~+80℃. The working medium is air. The bowl has a protective guard (PA69) and a round bent mounting bracket for easy attachment to equipment panels or piping. These filters are widely used for upstream air purification and pre-filtration on automated production lines in packaging, assembly, machine tools, automotive, electronics and other industries.

PC Series Push-to-Connect Pneumatic Tube Fittings
PC series push-to-connect pneumatic tube fittings are available in a range of models to meet the connection needs of pneumatic tubing systems. Their push-to-connect design allows the tubing direction to be freely adjusted after installation. The fittings offer good rigidity and resistance to vibration and contamination. RUNC PT thread sealant provides a seal, while straight threads are sealed with standard O-rings. The catalog covers PC threaded straight fittings and PC-N threaded straight fittings with NPT threads. They accommodate tube outer diameters ΦD of 4, 6, and 16 mm and 5/32, 3/16, 1/4, 5/16, 3/8, and 1/2 inches. Thread sizes include M5, M6, R1/8, R1/4, R3/8, R1/2, R3/4, NPT1/8, NPT1/4, NPT3/8, and NPT1/2. Dimensions including L1, L2, O, and φ are also provided.

PC-N Series Push-in Pneumatic Fittings
PC-N series push-in pneumatic fittings are designed for pneumatic piping systems. The push-in mechanism locks the tube upon insertion, providing an airtight connection ready for airflow. After installation, the tube can still swivel freely for easy routing. The rigid fitting body resists vibration and prevents contaminants from entering. Tapered threads (R/PT, NPT) are coated with thread sealant for sealing upon installation, while straight threads (M5, M6) are sealed with standard O-rings. The series comprises PC threaded straight fittings (M5, M6, R1/8, R1/4, R3/8, R1/2, R3/4) and PC-N threaded straight fittings with NPT threads (NPT1/8, NPT1/4, NPT3/8, NPT1/2). Compatible tube outer diameters include 4, 6, 16 mm and 5/32, 3/16, 1/4, 5/16, 3/8, 1/2 inches. Key dimensions include tube outer diameter ΦD, thread size R, thread length L1, overall length L2, O dimension and bore diameter φ.

PC Series Threaded Straight Connectors
PC series threaded straight connectors are available in two configurations: PC-G (G thread) and PCG (M/R thread), for pneumatic tubing with an outer diameter of 4~16mm. They feature nickel-plated brass bodies and plastic release rings, offering corrosion resistance, reliable sealing, and easy connection and disconnection. Thread sizes cover G1/8~G1/2, M5~M6, and R1/8~R1/2. With a working pressure of 0~1.0MPa and a working temperature of -20~60°C, they are widely used for piping connections in pneumatic control systems, automation equipment, and machinery manufacturing.