Pneumatic Components — Page 20

MU Series Oval Piston Cylinder (Non-Rotating Rod)

MU Series Oval Piston Cylinder (Non-Rotating Rod)

The MU series oval piston cylinder (non-rotating rod) is a pneumatic actuator from SNS Automation (Ningbo) Group. Its oval piston and non-rotating piston rod prevent the rod from turning during reciprocating motion, making it suitable for clamping, pressing, lifting, and stopping applications that require rod-end positioning and rotation prevention. Five bore sizes are available: 25, 32, 40, 50, and 63 mm, with standard strokes from 5~300 mm. The cylinder has an extruded aluminum alloy body and adjustable cushioning. The rod-end internal thread, lock nut, and port thread vary with bore size; for example, the 25 mm bore uses an M10×1.25 rod-end thread and an M5×0.8 port, while the 63 mm bore uses an M18×1.5 rod-end thread and an Rc1/4 port. Mounting options include the basic style, foot mounts (MU-L02~MU-L06, corresponding to bore sizes 25~63), and pivot accessories such as single and double clevis mounts.

RMS Series Cylinders

RMS Series Cylinders

The RMS series comprises pneumatic actuators (cylinders) manufactured by SNS Automation (Ningbo) Group. The catalog lists two subseries, RMS and RMSF. RMS cylinders are available in six bore sizes: 10, 16, 20, 25, 32, and 40 mm. RMSF cylinders are available in three bore sizes: 16, 20, and 32 mm. They support pushing, pulling, clamping, and lifting of small to medium-sized components in confined installation spaces. The catalog lists selection parameters such as action type, working medium, operating pressure range, proof pressure, and operating temperature range; the values shown in these rows should be verified against the manufacturer's complete specification sheet. Bore size is the primary selection parameter. Rod and mounting configurations, such as non-rotating rods, foot mounts, and single or double clevis mounts, are selected as needed. Mounting components such as foot mounts are selected according to bore size. These general-purpose cylinders are suitable for automation equipment, fixtures, packaging, and assembly lines.

RMSF Series Cylinders

RMSF Series Cylinders

The TWSNS RMSF series cylinders belong to the same product family as the RMS series. Their parameters are listed in series specification tables in the catalog. The RMSF series is available in bore sizes of 16, 20, and 32 mm, while the RMS series covers 10, 16, 20, 25, 32, and 40 mm; both series offer 16, 20, and 32 mm bores. The specification table has separate columns for each series and lists parameters such as operating type, working medium, operating pressure range, proof pressure, and operating temperature range. These pneumatic actuators are used in industrial automation equipment for linear pushing and pulling, clamping, lifting, and similar operations. Select the specific model based on bore size, stroke, mounting type, and accessory requirements.

RMT Series Magnetically Coupled Rodless Cylinder (Guide Rod Type)

RMT Series Magnetically Coupled Rodless Cylinder (Guide Rod Type)

The RMT series is a magnetically coupled rodless cylinder with guide rods. It transmits force through magnetic coupling and is suitable for long-stroke linear reciprocating motion where space is limited. The catalog lists five bore sizes: 16, 20, 25, 32, and 40 mm. The operating pressure range is 0.2–0.7 MPa (0.25–0.7 MPa for some bore sizes), and theoretical holding force (theoretical thrust) curves are provided. In use, the load’s center of gravity should coincide with or be close to the slider’s center of gravity. If this is not possible, check the allowable load using the load correction factor σ. For example, with a 25 mm bore and 650 mm stroke, the maximum load is 16 kg, the allowable load is 10.9 kg, and σ=0.68. For certain bore and stroke combinations, σ is 1.

RMTL Series Magnetically Coupled Rodless Cylinder (Precision Guide Rod Type)

RMTL Series Magnetically Coupled Rodless Cylinder (Precision Guide Rod Type)

The RMTL series magnetically coupled rodless cylinder (precision guide rod type) transmits force through magnetic coupling and has no piston rod. Precision guide rods ensure accurate linear motion and resistance to rotation. Six bore sizes are available: 10, 16, 20, 25, 32 and 40mm. The cylinder is double-acting and uses compressed air filtered through a filter rated at 40μm or higher. Operating pressure is 0.2~0.7MPa (30~100psi/2.0~7bar), with a proof pressure of 1.2MPa (175psi/12.0bar). Operating temperature is -20~70℃ and speed is 50~500mm/s. Stroke tolerance is 251~1000mm×1.5. Fixed shock absorbers are available as an option. Main components include aluminum alloy left and right mounting plates and threaded caps, stainless steel tubes and connecting rods, NBR O-rings and bumpers, medium-carbon steel guide rods, and socket head load-bearing screws. It is suitable for automation applications requiring long strokes, compact installation or high-precision guidance.

OSP-P Series Rodless Cylinders

OSP-P Series Rodless Cylinders

The OSP-P series consists of double-acting rodless cylinders with an integrated carriage and piston. Compressed air drives the internal piston, which moves the external carriage through a slot running axially along the cylinder barrel. Force is transmitted directly and is equal in both directions, saving approximately 50% of installation space. The range covers bore diameters of Ø16, 25, 32, 40, 50, 63 and 80 mm. Standard strokes are 100~4400 mm for Ø16 and 100~5700 mm for Ø25~63, available in 1 mm increments; longer strokes can be customized. Operating pressure is 0.5~8.0 bar and temperature is -10~+80 ℃. Air ports are M5, G1/8, G1/4 and G3/8. The end caps have ports in multiple directions and adjustable pneumatic cushioning. The cylinder barrel, end caps and piston shaft are made of high-strength steel or anodized aluminum alloy, and the sealing band is stainless steel. The cylinders are suitable for long-stroke automated conveying and positioning applications where space is limited.

PLF Series Compact Cylinders

PLF Series Compact Cylinders

PLF series compact cylinders are pneumatic actuators designed for light-load pushing, pulling, clamping and positioning applications where installation space is limited. The catalog provides overall and mounting dimensions for six bore sizes: 16, 25, 32, 40, 50 and 63 mm. It includes dimensions in multiple directions, air port threads (M5, G1/8, G1/4, G3/8) and mounting thread specifications. The catalog also provides maximum load, force and moment curves, and advises keeping loads and moments under dynamic operating conditions within 10–20% of the allowable values to prevent off-center loads and vibration from shortening service life. Select the cylinder based on bore size, stroke, mounting method and cushioning requirements.

MSQ Series Rack-and-Pinion Rotary Actuator

MSQ Series Rack-and-Pinion Rotary Actuator

The MSQ series rack-and-pinion rotary actuator converts the linear reciprocating motion of a piston into back-and-forth rotation of an output shaft. It is suitable for automated applications such as workpiece flipping, indexing, rotary clamping and opening and closing material stops. The double-acting actuator receives compressed air alternately from either side; the air supply side determines the direction and angle of rotation. The rotation angle can be adjusted using external limits or stops. The working medium is air, and no lubrication is required, allowing maintenance-free operation. Maximum operating pressure is 1MPa, with a typical operating range of approximately 0.2~1.0MPa (varying slightly by bore size). Standard bore sizes are φ10, φ20, φ30, φ50, φ70, φ100 and φ200 mm. Larger bores provide higher output torque; select a model based on the required torque, allowable axial and radial loads, and available installation space. The compact actuator delivers smooth torque and good positioning repeatability. It can be fitted with accessories such as magnetic switches, shock absorbers and adjustable stops, and is widely used for rotary motion on automated packaging, assembly, welding and material-handling lines.

CRQB Series Rotary Cylinder

CRQB Series Rotary Cylinder

The CRQB series rotary cylinder (swing cylinder) is a double-acting vane-type pneumatic actuator available in five bore sizes: Φ10, Φ15, Φ20, Φ30 and Φ40. Standard swing angles are 90° and 180°, with an adjustment range of ±5°. The operating medium is air. Maximum operating pressure is 0.7MPa for Φ10/Φ15 and 0.99MPa for Φ20~Φ40; minimum operating pressure is 0.15MPa and 0.1MPa, respectively. Ambient and fluid temperatures range from 0~60℃. Cushioning options include no cushioning or air cushioning (C air cushioning is available for Φ20 and above). Single-rod (S) and double-rod (W) versions are available, with an optional built-in magnetic ring and optional magnetic switches such as D-90AL, D-A72L, D-A73L and D-A76L for swing position detection. Port size is M5×0.8 for Φ10/Φ15 and 1/8 for Φ20 and above. Suitable for automated rotary applications such as workpiece turning, clamping, indexing and diverting.

SRC Series Rotary Cylinders

SRC Series Rotary Cylinders

SRC series rotary cylinders (rotary clamp cylinders) rotate and clamp workpieces downward. The model designation consists of the series code SRC, rotation direction, cylinder bore, cylinder stroke, and clamp type. Rotation direction is designated L for left or R for right. Cylinder bores are available in 12, 16, 20, 25, 32, 40, 50, and 63 mm (the catalog model table highlights 25/32/50/63). Stroke is specified as the downward clamping stroke. Clamp types are an unmarked single-sided clamp arm and a D double-sided clamp arm; the 25 bore is not available with a double-sided clamp arm. The catalog also lists the free supply method as M5×0.8. Parameters such as operating type, working fluid, pressure, temperature, and speed are not fully specified on the standard specifications page; consult the complete catalog when selecting a model.

RSQ Series Stopper Cylinders

RSQ Series Stopper Cylinders

The RSQ series stopper cylinders are pneumatic stopping devices with a fixed mounting height, designed to position and stop workpieces or slides on conveyor lines, indexing tables, and similar equipment. Bore sizes are 12, 16, 20, 32, 40, and 50 mm. Three operating types are available: double-acting, double-acting with built-in spring, and single-acting with spring extension. Rod end options include cylindrical, flat-sided, and roller types to suit the desired stopping contact. The roller type provides rolling contact with moving workpieces to reduce wear. The operating medium is compressed air, with a pressure range of 0.15~1.0 MPa (1.5~10.2 kgf/cm²) and an ambient and fluid temperature range of -10~70℃, with no freezing. No lubrication is required, and the cylinders can be connected directly to a standard dry air supply. The fixed mounting height allows quick interchange and replacement in equipment. Stroke tolerance is +1.4 mm.

RSA Series Stopper Cylinder

RSA Series Stopper Cylinder

The RSA Series stopper cylinder is a pneumatic stopping device manufactured by SNS Automation (Ningbo) Group Co., Ltd. Turning the adjustment dial changes the resistance of the built-in roller shock absorber, providing adjustable cushioning and a controlled stop for moving loads. It has the same specifications and operating range as the RS1H Series and is interchangeable with cylinders of the same size, sharing the same mounting dimensions. Model designations consist of RSA followed by the bore size, such as RSA 50. Different sizes can be selected by bore. Typical applications include positioning and stopping workpieces on conveyor lines, braking rotary tables, and stopping slide tables at their end positions in automated systems that require a cushioned stop. The catalog page is in Traditional Chinese, and the model designation table was not fully readable in the original scan. For dimensions other than bore size, including stroke, cushion stroke, and port thread, refer to the manufacturer's latest catalog or technical documentation.

VP Series Solenoid Valves

VP Series Solenoid Valves

The VP series consists of 2-position, 3-way pilot-operated solenoid valves, including the VP342 (port size PT1/4, effective area 16mm², CV=1.0) and VP542 (port size PT3/8, effective area 44mm², CV=2.1). They use internal or external pilot actuation and have an operating pressure range of 0.2~0.8MPa, a proof pressure of 1.5MPa, and an operating temperature range of -10~50°C (without freezing). The body is made of aluminum alloy and requires no lubrication. Maximum operating frequency is 5 cycles/second, and response time is less than 0.05 seconds. Protection rating is IP65 (DIN40050), and heat resistance is Class B. G or NPT port threads and DIN connector or lead-wire wiring are available. The standard voltage is AC220V, with several other voltage options. The valves offer reliable sealing, quick response, high flow, and a manual override. They can be integrated with a manifold to save installation space.

VF Series Solenoid Valves

VF Series Solenoid Valves

VF series solenoid valves are pneumatic directional control valves for use with air. They are available in two-position and three-position configurations, with single or double coils and center functions including closed center, exhaust center, and pressure center. The port size is 3/8, with an effective area of 36~45 mm², an operating pressure of approximately 0.1~0.9 MPa, a response time of ≤30 ms (two-position) or ≤50 ms (three-position), and a maximum operating frequency of 5 cycles/second or 3 cycles/second. Coils are available with direct leads (G) or a DIN connector (D), with standard voltages of AC110V/220V(50Hz) and DC12V/24V, Class B insulation, power consumption of 5.6VA/3.4VA or 1.8W/2W (with indicator light), and a surge suppressor. Common specifications include a maximum ambient and fluid temperature of 50℃, no lubrication required, a screwdriver-locking manual override, 30G/5G shock/vibration resistance, and dustproof seals. Models range from VF5120-△B-02 to VF5520-△B-02.

TWSY Series Solenoid Valves

TWSY Series Solenoid Valves

The TWSY series is a range of pneumatic solenoid valves (valve bodies) available in four sizes: 3000, 5000, 7000, and 9000. These cover pneumatic control circuits with medium-low to high flow rates. Side mounting brackets, models SX3000-16-A, SX5000-16-A, and SX7000-16-A, are available to secure the valve bodies to a base plate, manifold, or equipment frame. No bracket is offered for the 9000 size because of its different valve body construction. When selecting a valve, first determine the 3000/5000/7000/9000 size based on the required flow rate and port size, then select the corresponding bracket for the mounting method or choose a valve body without a bracket. The catalog lists only the available sizes and their matching bracket models. Details such as coil voltage, valve function (5-port, 2-position/5-port, 3-position), and port thread type must be confirmed in the detailed specifications.

TW/DB Series Universal and Bottom Plug-in Valve Manifolds

TW/DB Series Universal and Bottom Plug-in Valve Manifolds

TW/DB series universal and bottom plug-in valve manifolds provide centralized mounting for multiple solenoid valves. The universal type uses a conventional manifold base with an optional wiring module, offering versatility at a low cost. The bottom plug-in type features a custom base plate and an attractive, integrated all-aluminum alloy design. Compatible with solenoid valves including FESTO VUVG-L10/LK10 and VUVG-L14/LK14, SMC SY3□20/SY5□20/SY7□20, AirTAC 4V100M/4V200M, and CKD 4GD1/4GD2. Rated voltage: DC24V. Available with single- or double-solenoid control and 04-24 stations. Single-solenoid configurations support up to 24 stations and double-solenoid configurations up to 12 stations; A+B≤24 must also be satisfied.

VFA Series 5-Port Air-Operated Directional Valves

VFA Series 5-Port Air-Operated Directional Valves

The VFA series consists of 5-port air-operated (pneumatic pilot) directional valves. Pilot air pressure shifts the valve spool, making these valves suitable for pneumatic circuits without electrical power or where explosion protection is required. The series comes in two body sizes: type 30 and type 40/50. Type 30 has a PT1/4 port size and an effective area of 18mm² (Cv=1), and is available in four configurations: 2-position single pilot, 2-position double pilot, 3-position single pilot, and 3-position double pilot. Type 40/50 has a PT3/8 port size and an effective area of 45mm² (Cv=2.5), and is available in 3-position single-pilot and double-pilot configurations. The operating pressure range is 0.15~0.9MPa (1.5~9kgf/cm²), and the pilot pressure range is the same. Select the model according to the required number of positions (2-position/3-position), control method (single pilot/double pilot), and port size (PT1/4, PT3/8).

TSV Series Hand Lever Valves

TSV Series Hand Lever Valves

TSV series hand lever valves are manually operated, direct-acting pneumatic directional control valves with aluminum alloy bodies. They are available in 5-port, 2-position (TSV86522) and 3-port, 2-position (TSV98322) configurations. Both have PT1/4 ports, an effective area of 18mm² (Cv=1.00), and use air filtered to 40μm or finer. The operating pressure range is 0~0.8MPa (0~145psi), the proof pressure is 1.5MPa (215psi), and the operating temperature range is -20~70℃. Lubrication is not required; however, if lubrication is used, it must be continued without interruption. ISO VG32 or equivalent oil is recommended. The compact valves provide a positive lever feel and reliable positioning, making them suitable for equipment commissioning, manual direction switching, and air circuit on/off control. G and NPT pipe threads are available. Select the model according to the port and position configuration (5-port, 2-position or 3-port, 2-position) and thread type.

MV Series 3-Port, 2-Position Mechanical Valves

MV Series 3-Port, 2-Position Mechanical Valves

The MV series consists of direct-acting 3-port, 2-position mechanical valves. A button, roller or knob directly moves the valve spool to switch the valve, eliminating the need for a solenoid pilot. These valves are suitable for manual operation, workpiece detection, fixture positioning and similar applications. Port sizes are G1/8 (port size code 1) and G1/4 (code 2); position code 32 denotes a 3-port, 2-position valve. Actuator options include basic (blank), roller (R), selector knob (TB), locking button (EB), flat button (PP), raised button (PPL) and large round button (PB), meeting a range of operating and installation requirements. Standard specifications: air filtered through a 40μm filter; direct-acting operation; operating pressure 0-0.8MPa (0-114psi); operating temperature -5-60℃ (28-140℉); no lubrication required.

VM Series Pneumatic Valves

VM Series Pneumatic Valves

The VM series pneumatic valves include basic (base-piping) models such as VM132-M5-00A and VM133-M5-00A, designed for directional control in air and inert gas lines. The operating pressure range is -100kPa~1MPa, covering vacuum to medium-pressure applications. Ambient and fluid temperatures must be between -5~60℃ (no freezing). Side-piping and bottom-piping configurations are available. The valve body has panel mounting holes for M5×0.8 screws (4mm deep) and an M14×1 lock nut (5mm thick, 17mm across flats) for panel mounting. The exhaust port is a tapered 3-way type. The required operating force is approximately F.O.F.=26N (0.5MPa, VM132)/13N (VM133), with travel of P.T.=1.5mm, O.T.=1.5mm and T.T.=3mm/60°. These valves are suitable for manual or mechanical control on compact equipment panels.

TAC Series Mechanical Valves

TAC Series Mechanical Valves

TAC series mechanical valves (mechanically actuated directional control valves) use a cam lever or push button to manually switch the direction of airflow in pneumatic circuits. They are available in 2-way (2-port) and 3-way (3-port) versions, both with 2 positions. The port size code is M5, with an M5×0.8 port size. The operating fluid is air, the operating pressure range is 0~0.9 MPa, the effective area is 1.8 mm², the ambient temperature range is -5~+60℃ (no freezing), and each unit weighs approximately 30 g. The model number consists of TAC + number of ports (2/3) + actuator type (V: cam lever / P: push button), for example TAC-2V and TAC-3P. Compact and requiring little operating force, these valves are suitable for manual control circuits for small cylinders, clamps, and inspection fixtures.

XQ Series Manually Operated Directional Control Valves

XQ Series Manually Operated Directional Control Valves

The XQ series manually operated directional control valves are manufactured by SNS Automation (Ningbo) Group. They manually control the flow of compressed air in pneumatic circuits to reverse, stop, and maintain pressure in actuators such as cylinders. Two port and position configurations are available: the 3-port, 2-position (3/2-way) model is suitable for single-acting cylinders or circuits requiring a separate exhaust; the 5-port, 2-position (5/2-way) model is suitable for reversing double-acting cylinders. The compact aluminum alloy valve body can be mounted directly on an equipment panel or in a pipeline. A manual handle or button allows the valve to be switched when electrical or air supply is interrupted or during equipment commissioning, simplifying fault diagnosis and maintenance. The operating medium is air filtered through a 40μm or finer filter. Operating pressure is approximately 0~1.0 MPa, proof pressure is 1.5 MPa, and operating temperature is -20~70 ℃. Lubrication is not required. These valves are widely used in automated equipment, fixtures, packaging machinery, and other applications requiring manual directional control.

FV Series Foot Valves

FV Series Foot Valves

FV series foot valves are direct-acting pneumatic directional control valves available in two models: FV320 (3-port, 2-position) and FV420 (4-port, 2-position). They are suitable for pneumatic circuits requiring foot control. The working medium is air filtered through a screen rated 40μm or higher. Port sizes are PT1/8 and PT1/4, respectively. The operating pressure range is 0~0.8MPa, the operating temperature is -5~60℃, and no lubrication is required. G and NPT port thread options are available. Their compact design allows installation at the base of equipment or in the foot-operated area of a workstation, enabling hands-free start, stop, and directional control.

MS Series Hand-Pull Valves

MS Series Hand-Pull Valves

MS series hand-pull valves are two-port, two-position, direct-acting pneumatic valves for manual on/off and directional control in air lines. The aluminum alloy body provides a large effective flow area, smooth shifting, and comfortable operation. The working medium is air filtered through a 40μm or larger filter. Operating pressure is 0-1.0MPa, proof pressure is 1.5MPa, and operating temperature is -20-70℃. No lubrication is required. Models include MS-11MF, MS-22MF, MS-33MF, MS-44MF, MS-66MF, and MS-88MF, with port sizes from PT1/8 to PT1 and effective flow areas of 23.0-392.0mm². G or NPT threads are optional, and a double female-threaded (FF) version is also available.

KLA Series One-Way Flow Control Valves

KLA Series One-Way Flow Control Valves

The KLA series one-way flow control valve consists of a check valve and a throttle valve connected in parallel. It is a combined flow control valve, also known as a speed control valve. Airflow is throttled by the throttle valve in the forward direction and passes freely through the check valve in the reverse direction. The valve is commonly used to control the speed of actuators such as pneumatic cylinders. It is typically installed between the cylinder and the directional control valve and can be used for either meter-in or meter-out control. For slow, smooth cylinder movement, meter-out control is recommended to create back pressure and improve stability. The series covers nominal diameters of 3~50mm, uses compressed air as the working medium, and operates at pressures of 0.05~0.8MPa. Both medium and ambient temperatures are 5~50℃. The valves offer low leakage and a service life of 1.5 million cycles. Model numbers consist of KLA-L followed by the nominal diameter code. Some smaller diameters have a J suffix (e.g., KLA-L3-J), while larger diameters have no suffix (e.g., KLA-L20).

ASC Series One-Way Flow Control Valves

ASC Series One-Way Flow Control Valves

ASC series one-way flow control valves, also known as speed control valves or one-way speed control valves, consist of a check valve and a throttle valve connected in parallel. In the forward direction, the throttle valve restricts flow; in the reverse direction, air flows freely through the check valve. Typically installed between a cylinder and a directional control valve, they use exhaust throttling to create back pressure, smoothing actuator motion and controlling the speed of cylinders and other actuators. The working medium is compressed air filtered through a 40μm or larger filter. The operating pressure range is 0.05~0.95MPa (7~135psi), proof pressure is 1.5MPa (215psi), and operating temperature is -20~70℃. The valve body is made of aluminum alloy. Port sizes range from PT1/8~PT1/2, with standard rated flow rates of 200~1650L/min and check valve flow rates of 400~2500L/min. G or NPT port threads are available. Three body sizes are offered: ASC100/ASC200/ASC300.

RE Series Flow Control Valve

RE Series Flow Control Valve

The RE series flow control valve (speed control valve / one-way throttle valve) regulates the operating speed of actuators, such as cylinders, in pneumatic circuits by throttling airflow. The working medium is compressed air filtered through a filter rated 40μm or greater. The operating pressure range is 0-0.95MPa (0-135psi), and the operating temperature range is -5~60℃ (28-140℉). Four port sizes are available: RE-01 corresponds to PT1/8, RE-02 to PT1/4, RE-03 to PT3/8, and RE-04 to PT1/2, covering common pneumatic lines from φ4 to larger diameters. Manufactured by SNS Automation (Ningbo) Group Co., Ltd., the valve is compact and offers responsive adjustment for speed and flow control in a variety of pneumatic systems.

QE Series Quick Exhaust Valves

QE Series Quick Exhaust Valves

QE series quick exhaust valves are control components used in pneumatic circuits to rapidly exhaust air from actuators such as cylinders, significantly increasing cylinder reciprocating speed. The series includes four port sizes: QE-01, QE-02, QE-03 and QE-04, with PT1/8, PT1/4, PT3/8 and PT1/2 threaded ports, respectively. The working medium is compressed air filtered through a filter rated 40μm or greater. The operating pressure range is 0-0.95MPa (0-135psi), and the operating temperature is -5~60℃ (28-140℉). The compact valve can be mounted directly on a cylinder port or at the end of a pipeline in any orientation. It provides reliable sealing, high exhaust flow and fast response, making it suitable for speed control and rapid reversal circuits in pneumatic systems used in automation equipment, packaging machinery and assembly lines. Select the appropriate port size based on the cylinder connection thread and required exhaust flow.

KLA-L Series Silencers

KLA-L Series Silencers

The KLA-L series consists of silencers for pneumatic circuits, installed at the exhaust ports of components such as cylinders and solenoid valves to reduce exhaust noise and prevent dust ingress. The series is divided by nominal size into two groups: KLA-L3-J ~ KLA-L10-J (small bore, connection sizes G1/8 ~ G3/8) and KLA-L15-J ~ KLA-L50 (large bore, connection sizes G3/4 ~ G2), covering the exhaust port sizes of common pneumatic actuators. Selection is based primarily on overall and mounting dimensions: connection thread d, inner diameter d1, overall length L, body lengths L1/L2/L3, width across flats B, overall height Hmax, corner radius/head dimension R, and H/H1/H2. For the small-bore series, H, H1 and H2 indicate height and hex dimensions; for the large-bore series, Hmax and R indicate the maximum outside diameter and end corner radius. Screw the silencer directly into the matching exhaust port thread, ensuring that the exhaust path is unobstructed. This page provides overall dimensions in millimeters. For operating pressure, temperature and other media parameters, refer to the corresponding specification page for this series.

YDQ Series Quick Exhaust Valve

YDQ Series Quick Exhaust Valve

The YDQ series quick exhaust valve is an auxiliary component installed between the cylinder and the directional control valve in a pneumatic system. When the cylinder exhausts, it allows air to escape quickly through the exhaust port instead of passing through the directional control valve, greatly increasing cylinder extension and retraction speeds, particularly in systems with long piping. The valve has a direct-acting design: P is the inlet port (connected to the directional control valve output), A is the outlet port (connected to the cylinder), and O is the exhaust port (connected to a silencer). The working medium is air filtered through a 40μm or larger filter screen. The proof pressure is 1.5MPa and the maximum operating pressure is 1.0MPa. Two valve spool options are available: wear-resistant (5~60℃) and low-temperature-resistant (-35~60℃). Nominal port sizes range from 1/8~1 inch (G1/8~G1), with an effective area of 25~135mm², a flow rate of 0.5~6.6m³/min, and a switching time of ≤0.01~0.06s.

ST Series Shuttle Valves

ST Series Shuttle Valves

ST series shuttle valves, also known as two-way selector valves, are pneumatic control components with two inlets and one outlet. They automatically select and output the higher pressure signal for pressure signal selection and logic control in cylinders and pneumatic circuits. The series includes four models, ST-01~ST-04, with port sizes G1/8, G1/4, G3/8 and G1/2, effective areas of 7.5~60 mm², operating pressure ranges from 0~0.95 MPa to 0~7.5 MPa, and proof pressures of 1.5~15 MPa. Operating temperatures are -5~60℃ for ST-01 and -20~70℃ for ST-02~ST-04. Their compact bodies are easy to install in automated equipment pneumatic systems.

KA Series Check Valves

KA Series Check Valves

KA series check valves are directional control components that allow airflow in one direction and prevent reverse flow in pneumatic systems. The working medium is air filtered through a 40μm or finer filter. The operating pressure range is 0.15~0.8MPa (21~114psi), the proof pressure is 1.5MPa, and the operating temperature range is -20~70℃. The series includes 6 sizes, with connection ports from G1/8 to G1 and effective areas of 10~190mm² that increase with port size to suit pneumatic circuits with different flow requirements. The valves have threaded connections, a compact design, and are easy to install. They can be used with cylinders, solenoid valves, and other pneumatic components.

PCV Series Check Valves

PCV Series Check Valves

PCV series check valves (one-way valves) maintain pressure and form safety circuits in pneumatic systems. They prevent reverse airflow, allowing cylinders to stop instantly and achieve precise positioning. The valves feature a special circuit design and are available with a push-in pilot port (F type) to save installation space and improve installation efficiency. The working medium is air filtered to 40μm or better. Operating pressure is 0.1~1.0MPa, proof pressure is 1.5MPa, operating temperature is -20~70℃, and operating frequency is 40 cycles/min. Body size is 24.5mm, connection sizes range from PT1/8~PT1/2, and the pilot port is M5×0.8 or 1/8"~1/4". The ordering code consists of PCV and the specification code.

NRV Series Check Valves

NRV Series Check Valves

The NRV series comprises in-line pneumatic check valves (one-way valves) that control airflow in one direction and prevent backflow. They are used in pressure-holding safety circuits and for precise locking when cylinders stop instantaneously. The standard range includes six models: NRV06, NRV08, NRV10, NRV15, NRV20 and NRV25, with respective port sizes of PT1/8, PT1/4, PT3/8, PT1/2, PT3/4 and PT1. Effective areas range from 18~250 mm², with corresponding Cv values of 1.0~14.44, covering low- to high-flow pneumatic circuits. The working medium is air filtered through a 40μm or finer filter. The operating pressure range is 0.02~1.0MPa (2.9~145psi), the proof pressure is 1.5MPa (215psi), and the operating temperature is -20~70℃. The aluminum alloy body is lightweight and easy to install. In addition to standard PT threads, G and NPT threads are available to suit piping connections in different countries and regions.

ITV Series Electro-Pneumatic Proportional Valves

ITV Series Electro-Pneumatic Proportional Valves

ITV series electro-pneumatic proportional valves convert electrical signals linearly into pneumatic pressure output, enabling precise, stepless pressure adjustment in pneumatic systems. They are commonly used for tension and pressure control. Models are available in three body sizes, 1, 2, and 3 (ITV101~ITV305), and three set pressure ranges: 0.005~0.1MPa, 0.005~0.5MPa, and 0.005~0.9MPa. Minimum supply pressure is the set pressure+0.1MPa, and maximum supply pressure is approximately 0.2~1.0MPa. Supported power supplies are DC24V±10% or DC12-15V. Current consumption is ≤0.12A at DC24V and ≤0.18A at DC12-15V. ITV10□□ models can be fitted with a 品-shaped bracket or a flat bracket and can be installed inline with filter components such as the AF30-A air filter and AFM30-A oil separator. The model code is ITV+size(1/2/3)+pressure range code(01/03/05)+□ option suffix.

AF Series Air Filters

AF Series Air Filters

AF Series air filters remove water and dust from compressed air. They are often combined with AFM Series mist separators to form modular air preparation filter assemblies. The AF30-A listed in the catalog can be fitted to an inline filter assembly and installed independently or on a panel using the B310-L upper bracket and Y30, Y30L or Y40T spacers. Related pages also provide the set pressure ranges, supply voltages and connection specifications for compatible ITV electro-pneumatic proportional valves and IR precision regulators, making it easier to select components for a complete air preparation system.

AFM Series Oil Separators

AFM Series Oil Separators

AFM series oil separators are air preparation components typically installed downstream of modular filter assemblies, such as the AF30-A air filter. They provide further separation of oil mist from compressed air, supplying cleaner air to downstream pneumatic equipment. The catalog lists the AFM30-A as a representative model. It can be installed with accessories including the B310-L upper bracket, Y30 spacer, Y30L spacer with L bracket, and Y40T spacer with T bracket. The series is suitable for inline filter assemblies. Refer to the product catalog for specific port sizes, flow rates, and filtration ratings.

NITV Series Vacuum Pressure Switches

NITV Series Vacuum Pressure Switches

NITV series vacuum pressure switches detect negative pressure and control vacuum settings in vacuum systems. The standard models are NITV2090 and NITV2091. Both offer the same vacuum performance: a maximum supply vacuum of -101kPa, a vacuum setting range of -1.3~-80kPa, and a minimum supply vacuum (set vacuum) of -13.3kPa. They differ in supply voltage: NITV2090 uses DC24V±10%, while NITV2091 uses DC12~15V, accommodating different control power supplies. Mounting accessories include the KT-ITV-F2 flat bracket and the KT-ITV-L2 L-shaped bracket. See the dimensional drawings for dimensions in millimeters. These switches are suitable for vacuum pressure monitoring in automated vacuum gripping, handling, and inspection applications.

SSNS Series Pressure Switches

SSNS Series Pressure Switches

The SSNS series consists of mechanical air pressure switches (pressure relays) for pressure detection, alarms and control in pneumatic systems. The series includes ten specifications, with pressure ranges from -0.5~2 bar to 8~30 bar, differential (hysteresis) ranges from 0.2~0.7 bar to ≤10 bar, and factory settings from 1~20 bar. Maximum leak test pressure is available in two ratings: 16.5 bar and 33 bar. Very low, low, medium and high pressure models can be selected to suit operating conditions. The SSNS506M has a manual reset; all other models reset automatically. The scale is marked in both bar and psig and can be supplied in MPa, kgf/cm² or other units on request. Electrical contact ratings are AC125V 20A, AC250V 10A and DC24V 10A (non-inductive loads), and the contacts can switch inductive or non-inductive loads. Connections can be customized using suffixes: E for threaded, C for welded, S for capillary tube and B for air-cooled types. Suitable for pressure monitoring in air compressors, pneumatic control circuits, leak testing equipment and automated production lines.

WNS Series Pressure Controllers

WNS Series Pressure Controllers

WNS series pressure controllers feature an adjustable differential and are suitable for applications such as cooling water flow control and oil pressure protection. The series includes models WNS502, WNS504, WNS504H, WNS106 and WNS106H, with pressure adjustment ranges of 0.5~2, 0.5~3.5 and 1~6, oil outlet settings of 0.5 and 1, and maximum pressures of 17 or 30. The WNS502 is a low differential pressure model, while the H-suffix WNS504H and WNS106H have a maximum pressure of 30. The controllers use an SPDT single-pole double-throw microswitch, rated at 125V/250V/24V and 20A/10A/10A (AC/AC/DC), with non-harmonic current ratings of 20A/10A/10A, harmonic current ratings of 15A/8A/8A and pulse current ratings of 72A/64A. The series has no time-delay device; the pressure differential is set using an adjustment screw. It is suitable for automated fluid control systems that require switching on when the pressure differential rises or falls.

CBD Series Differential Pressure Controllers

CBD Series Differential Pressure Controllers

The CBD series consists of adjustable differential pressure controllers without a time-delay device, used for cooling water flow control, oil pressure protection, and similar applications. The pressure adjustment range covers 0.5~6 (WNS502 is a low differential pressure model with a range of 0.5~2). The oil outlet setting is 0.5 or 1, and the maximum pressure is 17 or 30. The contact configuration is single-pole double-throw (common terminal 1; terminals 1~3 close as differential pressure increases, and terminals 1~5 close as differential pressure decreases). Electrical specifications: rated voltage 125VAC/250VAC/24VDC; rated current, non-harmonic 20A/10A/10A, harmonic 15A/8A/8A; pulse current 72A (125VAC) and 64A (24VDC).

HWGT Series Pneumatic Vibrators

HWGT Series Pneumatic Vibrators

The HWGT series pneumatic vibrator (rotary pneumatic vibrator) is manufactured by SNS Automation (Ningbo) Group Co., Ltd. Compressed air enters through the inlet and impinges on the gear, which rotates on bearings. An eccentric steel counterweight inside the housing rotates with the gear, generating vibration through centrifugal force. Vibration force and frequency can be adjusted continuously by changing the air pressure (0.2/0.4/0.6MPa). The vibrator starts and stops instantly, responds quickly, operates quietly, delivers strong vibration, and is safe and reliable. The series includes 12 sizes (HWGT-4~HWGT-60), with a frequency range of 4750~45500 V.P.M (cycles/min), vibration force of 130~3100 N, air consumption of 30~480 l/min, air inlet size of 1/8~1/2, and weight of 260~5590 g. Typical applications include material conveying, vibratory screening, vibration-assisted discharge at material gates, package filling, and vibration of casting sand molds.

HWK Series Pneumatic Steel Ball Vibrators

HWK Series Pneumatic Steel Ball Vibrators

HWK series pneumatic steel ball vibrators use compressed air to drive a precision steel ball around the inside of a steel sleeve. The ball's eccentric rotation generates centrifugal force, producing vibration. Vibration force and frequency can be adjusted through the air supply pressure. The sealed aluminum alloy housing is suitable for wet, dusty and hazardous environments. Applications include material conveying, hopper and gate vibration, packaging and filling assistance, and vibration of foundry sand molds. Standard models range from HWK-8 to HWK-32, with operating pressures of 0.2, 0.4 and 0.6 MPa, frequencies of approximately 7500 to 34100 V.P.M, vibration forces of 245 to 4000 N, and air consumption of 90 to 680 L/min.

R Series Roller Vibrators

R Series Roller Vibrators

R Series roller vibrators use compressed air to drive a steel ball or roller around inside a sleeve, producing centrifugal vibration. Vibration frequency and force can be adjusted by changing the air pressure. Their simple, safe design offers a long service life and is suitable for damp, dusty and explosion-hazard environments. Standard models include R-50, R-65, R-80 and R-100, with an operating pressure of 0.2–0.6 MPa, a frequency of approximately 11,050–36,150 V.P.M, a vibration force of 1,175–8,955 N and air consumption of 1,450–7,350 L/min. Applications include material conveying, hopper and material gate vibration, assisting with package filling and vibrating foundry sand molds.

NTP Series Reciprocating Piston Vibrators

NTP Series Reciprocating Piston Vibrators

NTP series pneumatic reciprocating piston vibrators use compressed air to drive a piston back and forth, generating vibration. They offer high power, low noise, and continuously adjustable vibration force and frequency. The nominal frequency is approximately 43~146 cycles/minute, with a vibration force of approximately 150~2039 N. The maximum operating temperature is 150℃, with a 200℃ version available on request. Applications include hopper vibration, material conveying, emptying, impact, and tapping. They are suitable for wet, dusty, and potentially explosive environments. Standard models include NTP25, NTP32, and NTP48, with dimensional and mounting interface details available.

SK Series Pneumatic Knocker

SK Series Pneumatic Knocker

The SK Series pneumatic knocker uses compressed air to drive a reciprocating piston, producing impact and vibration. It offers high power, strong impact force, and quiet operation. Its nominal frequency is 43~146 impacts/minute, with an excitation force of 150~2039 N. Frequency and amplitude can be continuously adjusted through air pressure. The maximum operating temperature is 150℃, with custom 200℃ versions available. It is suitable for vibratory emptying, conveying, impact, and tapping applications involving bins, pipes, and hoppers, and can be controlled manually or electrically.

DMF Series Solenoid Pulse Valves

DMF Series Solenoid Pulse Valves

DMF series solenoid pulse valves are core components of baghouse dust collector cleaning systems. The right-angle (Z-type) design has an inlet-to-outlet angle of approximately 90°, making it easy to connect to the air header and dust collector blowpipe. It provides smooth airflow and a powerful blast, delivering the air pulses required for effective cleaning. A hard-sealing design with seal memory between the diaphragm assembly and air chamber ensures sealing performance and durability over long-term use. The series includes right-angle, submerged, threaded, straight-through, and pneumatically controlled explosion-proof designs. Nominal sizes range from G3/4"~G4" (Φ20~Φ102). The valve body is made of ADC alloy, the pilot head is made of 430FR stainless steel, and the diaphragm is made of imported nitrile rubber. Standard voltage options are AC220V, AC110V, AC24V, and DC24V, with model code positions for temperature ratings and other options.

DMF-Y Series Solenoid Pulse Valve (Immersion Type)

DMF-Y Series Solenoid Pulse Valve (Immersion Type)

The DMF-Y series comprises immersion-type, also known as embedded, solenoid pulse valves. Mounted directly on the air manifold (air tank), they offer improved flow and lower pressure loss, making them particularly suitable for applications with low air supply pressure. They are widely used in pulse-jet cleaning systems for baghouse dust collectors. The valve body, upper cover, middle cover, and small passage cover are die-cast from ADC aluminum alloy. The pilot assembly is made of 430FR stainless steel, while the large and small springs and fasteners are made of 321 stainless steel. The diaphragms and O-rings are made of imported nitrile rubber (NBR). Nominal diameters range from Φ25 to Φ102. Outlet connections are available in threaded G1″ to G1 1/2″ and embedded Ø50 to Ø102 configurations. The valves have 1 to 2 diaphragms, weigh 0.8 to 5.65 kg, and have a flow coefficient that increases with diameter.