Pneumatic Components — Page 19

RQF/RDQF Series Frame-Side Flange Pneumatic Cylinders

RQF/RDQF Series Frame-Side Flange Pneumatic Cylinders

The RQF/RDQF series frame-side flange pneumatic cylinders from SNS Automation (Ningbo) Group Co., Ltd. feature a single-rod, double-acting design, with bore sizes of 20, 25, 32/40, 50/63, and 80/100 mm. They operate with air at a pressure of 0.05~1.0 MPa. The rod end has an internal thread, and versions are available without a magnetic switch (-10~70℃) or with a magnetic switch (-10~60℃). The space-saving frame-side flange mounting uses CQS-F020 mounting hardware for a 20 mm bore or CQS-F025 for a 25 mm bore, with a corresponding stroke range of 15~50 mm. These cylinders are suitable for automated pushing, pulling, and clamping in compact spaces.

ACQ Series Ultra-Thin Cylinders

ACQ Series Ultra-Thin Cylinders

ACQ series ultra-thin cylinders conform to JIS standards and are available in bore sizes of 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100 mm. Types include double-acting (ACQ, ACQJ), single-acting extension (ASQ), single-acting retraction (ATQ), and double-acting twin-rod (ACQD). The front and rear covers are secured with C-shaped retaining rings, and the piston is riveted to the piston rod, creating a compact, reliable design that saves mounting space. The cylinder bore is treated for dust and wear resistance, and the extended distance between the front and rear guides improves guidance and durability. Magnetic switch grooves around the cylinder body make it easy to install magnetic switches. Port threads are available in PT, G, and NPT. Operating pressure is 0.15~1.0MPa for double-acting models and 0.2~1.0MPa for single-acting models, with a proof pressure of 1.5MPa. Operating speed is 30~500 mm/s (50~500 mm/s for single-acting models). The operating medium is air filtered through a 40μm or finer filter. Mounting accessories include front and rear piston connecting plates and double-clevis mounting brackets.

ACQ Series Ultra-Thin Cylinders

ACQ Series Ultra-Thin Cylinders

ACQ series ultra-thin cylinders comply with JIS standards and feature a compact, low-profile design for installations with limited space. The cylinder body and front and rear covers are secured with C-shaped retaining rings. The cylinder bore is precision-finished and hard-anodized for wear resistance and durability. The piston uses a profiled bidirectional seal with an oil-retaining function. Standard specifications cover bore sizes of 125, 140, and 160 mm. The cylinders are double-acting and use air filtered through a 40 μm or larger mesh filter. Operating pressure is 0.15~1.0 MPa, proof pressure is 1.5 MPa, operating temperature is -20~70 ℃, speed is 30~500 mm/s, and the port size is PT3/8. Magnetic sensor switch grooves are provided. Options include ACQ, ACQD, and ACQJ variants, as well as stroke, adjustment stroke, magnet, and piston rod thread configurations.

ACQ Series Long-Stroke Ultra-Thin Cylinders

ACQ Series Long-Stroke Ultra-Thin Cylinders

The ACQ series long-stroke ultra-thin cylinders feature a double-acting design and are available in bore sizes Φ32, Φ40, Φ50, Φ63, Φ80 and Φ100mm for applications requiring strokes greater than 100mm. They use compressed air filtered through a filter of approximately 40μm or greater, with an operating pressure range of 0.15~1.0MPa (22~145psi), a proof pressure of 1.5MPa (215psi) and an operating temperature range of -20~70℃. They are suitable for dust-protected environments. The ultra-thin, compact body takes up little mounting space and delivers stable output force, making these cylinders common pneumatic actuators for clamping, pushing, lifting and positioning in automated equipment. Two mounting styles are available: the standard ACQ and the externally threaded ACQJ. Overall and mounting dimensions (A, AB, AC, B, D and E), as well as thread sizes such as M12×1.25, M16×1.5, M20×1.5 and M27×2.0, vary by bore size, allowing direct mounting to a variety of fixtures and frames.

ACQJ Series Long-Stroke Ultra-Thin Cylinder

ACQJ Series Long-Stroke Ultra-Thin Cylinder

The ACQJ series is a range of long-stroke, ultra-thin, double-acting cylinders with bore sizes of Φ32, Φ40, Φ50, Φ63, Φ80 and Φ100, suitable for strokes greater than 100 mm. The working medium is compressed air filtered through a filter of approximately 40 μm or larger. The operating pressure range is 0.15~1.0 MPa (22~145 psi), the proof pressure is 1.5 MPa (215 psi), the operating temperature is -20~70 ℃, and the operating speed range is 30~500 mm/s. The cylinders are suitable for dust-protected environments. Their ultra-thin bodies are available in configurations including an external-thread type, with dimensions varying by bore size and interchangeable with standard models. They are commonly used for linear operations such as clamping, pushing and positioning in automated equipment.

TACQ Series Ultra-Compact Guided Cylinder

TACQ Series Ultra-Compact Guided Cylinder

The TACQ series is a double-acting, ultra-compact cylinder with two guide rods. Its flat body and short axial length save space, while the guide rods also prevent rotation. When retracted, the cylinder mounting plate's rotation is limited to ±0.2° (12 and 16 bores) or ±0.1° (20 bore and above). The cylinder can directly withstand certain off-center loads and lateral moments, making it suitable for clamping, lifting and pushing applications where space is limited and resistance to rotation and off-center loads is required. Ten bore sizes are available: 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100 mm. The cylinder is double-acting and uses air filtered through a 40μm or larger filter. Its operating pressure range is 0.15~1.0 MPa (22~145 psi), proof pressure is 1.5 MPa (215 psi), and recommended operating pressure is 0.5 MPa. G or NPT port threads are available. During installation, keep hands out of the gap between the mounting plate and cylinder body. The rotational moment applied to the guided mounting plate must not exceed the allowable value, as this may shorten the service life or damage the cylinder.

CQM Series Compact Guided Cylinder

CQM Series Compact Guided Cylinder

The CQM series compact guided cylinder is a single-rod, double-acting cylinder with mounting dimensions interchangeable with the CQS and CQ2 series, making it easy to retrofit or replace equipment. Its guide rod design limits rotational deviation to less than ±0.2°, making it suitable for compact applications requiring a degree of guidance accuracy. Operating pressure ranges from 0.12 MPa to 1.0 MPa. Ambient and fluid temperatures range from -10~+70℃ without magnetic switches and -10~+60℃ with magnetic switches (no freezing). Stroke lengths and magnetic switch configurations are available as options. Never use the cylinder as a stopper to absorb external impacts.

CQM Series Compact Guided Cylinder

CQM Series Compact Guided Cylinder

The CQM series compact guided cylinder is a compact, single-rod, double-acting cylinder with mounting dimensions interchangeable with the CQS and CQ2 series, making equipment replacement and upgrades easier. Its maximum operating pressure is 1.0 MPa and minimum operating pressure is 0.12 MPa. The operating temperature range is -10~+70℃ without a magnetic switch and -10~+60℃ with a magnetic switch (no freezing). Its guide rod design limits rotational deviation to within ±0.2°, making it suitable for pushing, clamping, positioning and other applications where space is limited. Select the bore size, stroke and standard or magnetic type as required. Do not use the cylinder as a stopper.

CQM Series Compact Guided Cylinder

CQM Series Compact Guided Cylinder

The CQM series compact guided cylinder is a single-rod, double-acting cylinder with a slim body and integrated guide rods. It is suitable for linear motion applications requiring rotation prevention and support for moderate lateral loads. The maximum operating pressure is 1.0 MPa, and the minimum operating pressure is 0.12 MPa. The ambient and fluid temperature range is -10~+70℃ without a magnetic switch and -10~+60℃ with a magnetic switch (no freezing). Its mounting dimensions are interchangeable with those of the CQS and CQ2 series. Non-rotation accuracy is within ±0.2°. Do not use it as a stopper. Applications include clamping, pushing, and positioning in automated equipment.

ADVU Series Compact Cylinders

ADVU Series Compact Cylinders

The ADVU series compact cylinder is a double-acting cylinder with a compact axial design, short stroke and minimal installation space requirements. It is available in 11 piston diameters from Φ12 to Φ125 mm (12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125). Strokes for bore sizes from 12 to 100 mm can be selected from the stroke table; Φ125 is a larger-bore option. The cylinder body has a flat-profile design with recessed end caps. Air port threads are M5, G1/8 or G1/4 depending on the bore size, and mounting threads range from M4 to M12. The model designation combines several coded segments: the piston rod can have an internal thread (blank) or external thread (A), and options include non-adjustable cushioning at both ends (P), magnetic sensing (A), a double-ended piston rod (S2), heat-resistant seals (S6), a double-ended hollow piston rod (S20), and highly wear-resistant seals (R3). It is suitable for rapid short-stroke movements in clamping, handling and positioning applications.

ADN Series Compact Cylinders

ADN Series Compact Cylinders

The ADN series comprises modular compact cylinders with bore sizes of 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 and 125 mm. The basic model can be configured with modular options: S1 reinforced piston rod for increased lateral load capacity; S2 double-ended piston rod for operation in the same direction on both the forward and return strokes, with provision for mounting an external valve; S6 heat-resistant seal rated up to 120℃; S10 slotted piston rod, low-speed version for continuous, stable low-speed motion over the full stroke; S20 double-ended hollow piston rod for conveying vacuum, small components and media; and K2 piston rod with extended external thread. The catalog provides mounting and interface dimensions for each bore size, including AF, AM, KF, KK, T4, WH, ZJ and ZM. These cylinders are suitable for pneumatic actuation in confined installation spaces.

CJPB Series Panel-Mount Cylinders

CJPB Series Panel-Mount Cylinders

The CJPB series consists of panel-mount pneumatic cylinders that use air as the operating medium. They are suitable for pushing, clamping and lifting in compact spaces. Three bore sizes are available: 6, 10 and 15 mm. The operating pressure is 0.2~0.7 MPa for single-acting, spring-return models and 0.12~0.7 MPa for double-acting models. The operating temperature is -10~70℃ (no freezing), piston speed is 50~500 mm/s, stroke tolerance is approximately 1.0 mm, and port size is M5×0.8. Lubrication is generally not required. The panel-mount design allows direct attachment to a panel, and magnetic switches can be fitted for position detection.

CP Series Cylinders

CP Series Cylinders

CP Series cylinders are compact pneumatic actuators available in four standard bore sizes: 4, 6, 10, and 16 mm. They are suitable for short-stroke pushing, clamping, stopping, and positioning in electronics, semiconductor, packaging, and medical device equipment. In addition to the basic model, the series offers flange-mounted (CP-F Series) and foot-mounted versions. Six dimensions are specified for the flange-mounted version: FC, FT, FW, FX, FY, and FZ. All other dimensions are the same as those of the basic model, allowing interchangeable installation. Selection is based primarily on bore size, mounting style, and stroke; larger bores provide greater output force. This catalog page does not specify values for operating mode, flow rate, maximum operating pressure, minimum operating pressure, or temperature range. Consult the complete technical documentation to confirm the operating pressure and speed ranges before use.

PB Series Pen Cylinders

PB Series Pen Cylinders

The PB series pen cylinders from Shankesi Automation (Ningbo) Group are ultra-slim pneumatic actuators available in bore sizes of φ4, φ6, φ10, φ12 and φ16 mm. The φ4/φ6 models are available in double-acting and single-acting extension versions, while the φ10/φ12/φ16 models are available in double-acting, single-acting extension and single-acting retraction versions. The operating medium is compressed air filtered through a filter rated 40μm or greater. Operating pressure is 0.15~0.7MPa (0.2~0.7MPa for smaller bore sizes), proof pressure is 1.2MPa (175psi/12bar), operating temperature is -20~70℃, and operating speed is 50~800mm/s. Their slender, pen-shaped design makes them suitable for precision pressing and positioning in space-constrained applications such as electronics, semiconductors and small fixtures. Stroke tolerances are specified in the specification table.

PBD Series Cylinders

PBD Series Cylinders

SNS PBD series cylinders are pneumatic actuators suitable for linear pushing and pulling, clamping, and positioning in automated equipment. Bore sizes include Φ6, Φ8, Φ10, Φ12, Φ16, Φ20, Φ25, and Φ32 mm. Operating types include double-acting, single-acting extension, and single-acting retraction. The working medium is air filtered through a 40μm or finer filter. The operating pressure range is 0.15~0.7 MPa (1.5~7.0 bar), the pressure resistance is 1.2 MPa, the operating temperature is 0~70℃, and the operating speed range is 50~800 mm/s. The dimensional table provides mounting dimensions such as E and N1 for strokes of 10~200 mm, making selection and replacement easier.

TR Series Cylinders

TR Series Cylinders

TR Series cylinders are double-acting pneumatic actuators available in six bore sizes: 6, 10, 16, 20, 25 and 32mm. They are suitable for linear pushing and pulling, clamping and positioning in automated equipment. The operating medium is compressed air filtered through a filter rated 40μm or greater. Operating pressure is 0.15~1.0MPa (22~145psi), proof pressure is 1.5MPa, operating temperature is -20~70℃, operating speed is 30~500mm/s, and stroke tolerance is 0.1mm. A 5~10mm stroke adjustment mechanism is also provided. Cylinder mounting dimensions are specified by bore and stroke, with dimension codes including A, AB, AC, B, BA, C, CA, D, DA, G, JB, JC, LB, P, PA and PB. Standard strokes range from 10~200mm, with models selectable by stroke length.

Pneumatic Cylinders

Pneumatic Cylinders

This series of pneumatic cylinders is designed for factory automation equipment. These pneumatic actuators use compressed air to move a piston in a linear reciprocating motion and are widely used for fixture clamping, workpiece pushing, positioning, and transfer. The standard specifications table lists six bore sizes—6, 10, 15, 20, 25, and 32 mm—covering small to medium cylinders. The cylinders use hollow barrels, with dimensions and weights provided for barrel length, diameter, wall thickness, and weight. The instructions illustrate how and where to mount the cylinders to fixtures and state that the allowable lateral load must not exceed the values in the table. When selecting a cylinder, check the allowable and maximum lateral loads against the actual stroke and lateral forces to prevent off-center loading from causing premature piston rod wear or bending. The catalog focuses on dimensional tables and installation and usage precautions; model coding rules are not provided.

MGJ Series Miniature Guided Cylinder

MGJ Series Miniature Guided Cylinder

The MGJ series miniature guided cylinder features a double-acting design and is available in ø6 and ø10 bore sizes. It uses air as the working medium, with an operating pressure range of 0.15MPa to 0.7MPa and an ambient and fluid temperature range of -10℃~60℃ (no freezing). No lubrication is required, and the piston speed range is 50~500 mm/s. Integrated guide rods prevent rotation and provide high-precision guidance. The compact design is ideal for automated positioning, clamping, pushing and precision assembly of small workpieces.

MGP Series New Guided Cylinder

MGP Series New Guided Cylinder

The SNS MGP series new guided cylinder uses a dual guide rod design to withstand substantial lateral loads and deflection moments. It is suited to lifting, clamping, positioning, and transfer applications requiring high-precision guidance. Ten bore sizes are available: 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100 mm. Guide options include plain bearings and high-precision ball bearings, with piston rod non-rotation accuracy and stroke tolerances specified for each. The standard specifications table lists parameters by bore size, including operation type, operating fluid, maximum and minimum operating pressures, ambient and fluid temperatures, lubrication, and piston speed. Select a model based on the required bore and stroke combination.

MGG LB Series Guided Cylinder

MGG LB Series Guided Cylinder

The MGG LB series is a guided cylinder with two guide rods, an integrated hydraulic shock absorber, and a stroke adjustment mechanism for smooth cushioning and precise end-position adjustment. Its guide rod support structure provides strong resistance to lateral loads, making it suitable for applications involving off-center loads and side forces. Guide rod bearings are available in two types: sliding bearings for general guidance and ball bearings for high-precision, low-friction guidance. Bore sizes are 6、10、16、20、25、32、40、50、63、80、100mm, with common stroke lengths of 25、50、75、100mm and an operating pressure range of 0.15~0.7MPa (23~100psi). The cylinder has a modular construction comprising a body, mounting plate, guide rods, front cover, piston, piston rod, bumpers, and magnet. Magnetic switches can be added for position detection. Models are designated “MGG LB + bore diameter - stroke,” with port thread options including Rc3/8, NPT3/8, and G3/8.

TCL/TCM Series Cylinders

TCL/TCM Series Cylinders

The TCL/TCM series comprises small-bore pneumatic cylinders with bore sizes from 6 mm to 63 mm. TCL and TCM offer two different construction and mounting configurations to suit operating requirements. The dimensional table lists mounting and overall dimensions for each bore size, including A, AB, AC, AD, B, BA, C, CA, D, G, K, L, LA, LB, LC and LD, as well as port and thread dimensions including M, MA, MB, N, P, PD and PF. The end caps and connections use fine-pitch threads such as M2.5×0.45, M3×0.5 and M4×0.7 for a compact design. Stroke options are available in ranges of ≤30 mm, 31-100 mm, 101-200 mm and >200 mm. These cylinders are suitable for automated linear pushing and pulling, lifting and clamping in confined installation spaces.

HFZ Series Pneumatic Grippers

HFZ Series Pneumatic Grippers

The HFZ series consists of parallel-opening pneumatic grippers available in three action types: HFZ standard double-acting, HFZ single-acting normally open, and HFSZ single-acting normally closed. Seven bore sizes are available: Φ6, Φ10, Φ16, Φ20, Φ25, Φ32, and Φ40. Effective gripping force ranges from approximately 6.1~320 N, with closing strokes across both jaws of 4/4/6/10/14/22/30 mm, respectively. Gripping force and stroke increase with bore size. Three body mounting styles are available: standard (Φ6, Φ10~Φ40), F side-mount (Φ6, Φ10, Φ16~Φ40), and N through-hole mount (Φ6, Φ10, Φ16~Φ40), allowing side or through-hole installation in confined spaces. Model numbers consist of an action-type prefix (HFZ / HFSZ) followed by the bore size, with suffix F indicating side mounting and N indicating through-hole mounting. The grippers are suitable for gripping, positioning, and transferring small workpieces on automated production lines in electronics, semiconductors, packaging, automotive components, and other industries.

HFZ/HFSZ Series Pneumatic Grippers

HFZ/HFSZ Series Pneumatic Grippers

HFZ/HFSZ series pneumatic grippers are used to grip and hold workpieces in automated equipment. They are available in three configurations: HFZ standard double-acting, HFZ single-acting normally open, and HFSZ single-acting normally closed. Bore sizes are 6, 10, 16, 20, 25, 32, and 40 mm. Mounting options include standard, side mounting (F type), and through-hole mounting (N type). The catalog lists parameters such as effective support force, closing stroke, and weight for each bore size. These grippers are suitable for tooling, handling, and positioning applications requiring compact two-finger gripping. Models include HFZ10, HFZ16, HFZ20, HFZ25, HFZ32, and HFZ40. Select a model based on bore size, operating configuration, mounting method, and required gripping force.

HFK Series Parallel Air Grippers

HFK Series Parallel Air Grippers

The HFK series consists of parallel air grippers with roller guides. Two fingers open and close in parallel along the guides, allowing workpieces to be gripped externally or held internally. The roller guides offer low friction, high rigidity and high repeatability, making them suitable for automated loading, unloading and assembly of electronics, semiconductors and automotive components. Three operating types are available: HFK is the standard double-acting type, with compressed air driving both opening and closing; HFTK is a single-acting, normally open type, whose fingers open when air supply is lost; and HFSK is a single-acting, normally closed type, whose fingers remain closed and gripping when air supply is lost, providing greater safety. The catalog uses symbols such as A, AB, B, C, CA, D, DA, DB, E and EA to identify external dimensions, making it easier to match the gripper to mounting surfaces, finger attachments and magnetic switch grooves. Selection also requires confirmation of parameters such as bore size, opening and closing stroke, gripping force, operating pressure and operating frequency.

HDM Series Cylinders

HDM Series Cylinders

HDM series cylinders are double-acting pneumatic cylinders available in five bore sizes: 12, 16, 20, 25, and 32 mm. They use air as the operating medium, with an operating pressure range of 1.5-7 kgf/cm² (50-700 kPa), an operating temperature range of 0-60°C, and a maximum operating frequency of 100 cycles/min. Lubrication is optional. These compact cylinders are suitable for linear push-pull, clamping, and positioning applications in automated equipment. Models HDM-10, HDM-16, HDM-20, HDM-25, and HDM-32 correspond to the bore sizes listed above, respectively. Select the appropriate bore size based on the required output force.

HDM Series Pneumatic Grippers

HDM Series Pneumatic Grippers

The HDM series consists of double-acting pneumatic grippers with aluminum alloy bodies and alloy steel jaws and main shafts, designed for gripping and positioning workpieces in automated equipment. The catalog lists bore diameters of 12, 16, 20 and 25 mm, among others, with minimum operating pressures of approximately 0.1~0.22 MPa. Threaded holes on the grippers include 4-M3×0.5, 4-M4×0.7 and 4-M5×0.8, and effective gripping force increases with bore diameter. Mounting options include threaded holes on the bottom or side of the body, as well as HM-type or HB-type mounting fixtures at the bottom. Major components, including the body, rear cover and piston, are made of aluminum alloy, while the jaws, actuating lever and shaft-end coupling block are made of alloy steel. Replacement seals are available, including piston seals, shaft seals and rear cover O-rings. The weight table covers HDM-12S through HDM-32S, with weights of approximately 0.1~1.23 kg.

HFR Series 180° Opening and Closing Pneumatic Gripper

HFR Series 180° Opening and Closing Pneumatic Gripper

The HFR series is a 180° opening and closing pneumatic gripper (angular gripper). Dual pistons and a rack-and-pinion or linkage mechanism convert the pistons' linear motion into a 180° opening and closing motion of two fingers around a pivot, enabling workpieces to be gripped, flipped, positioned and held between two points. The series code is HFR, with five bore sizes: 10, 16, 20, 25 and 32. A blank mounting-style field indicates the standard type. Larger bores provide greater effective holding force. When selecting a model, the required holding force should be calculated at 10~20 times the workpiece weight, with an additional safety margin for acceleration or impact. For example, with a 0.05kg workpiece, pivot distance L=30mm and operating pressure of 5kgf/cm², the required effective holding force is approximately 10N or more; the HFR16 (effective holding force 17N) can be selected. The main body components are made of aluminum alloy, alloy steel and stainless steel, with NBR seals and accessories including a C-shaped retaining ring (spring steel). The gripper is suitable for automated assembly, handling and inspection stations.

HFY Series Pneumatic Gripper (Y-Type)

HFY Series Pneumatic Gripper (Y-Type)

The SNS HFY Series pneumatic gripper (Y-type) is powered by compressed air and features a Y-type jaw design for gripping, handling, and positioning workpieces in automated equipment. It is available in five bore sizes: 6, 10, 16, 25, and 32 mm, with three mounting options: rear mounting, front threaded-hole mounting, and side mounting. The corresponding fastening bolts are M3×0.5, M4×0.7, M5×0.8, M6×1.0, and M6×1.0, respectively. Maximum tightening torque ranges from 0.89~2.5 N·m, and maximum bolt insertion depth ranges from 5~15 mm. A drop-prevention device must be installed during use, and excessive external force and impact must be avoided. The workpiece must be positioned on the centerline between the two jaws and inserted coaxially. Use a speed control valve to adjust the jaw opening and closing speeds. When installing jaw attachments, hold the jaw with an open-end wrench before tightening the screws with a hex key.

HFP Series Pneumatic Gripper (Mechanical Parallel Type)

HFP Series Pneumatic Gripper (Mechanical Parallel Type)

The HFP series pneumatic gripper (mechanical parallel type) is a double-acting parallel gripper powered by compressed air and requires no lubrication. It has an operating pressure range of 0.1~0.7MPa, an ambient temperature range of -10~+60℃, and repeatability of ±0.05mm. Five bore sizes are available: 10, 16, 20, 25, and 32, each with a choice of long, medium, or short opening and closing strokes. Compared with the MH22 series, its height is reduced by approximately 1/3, its moment is lower, and its rigidity is increased. The finished product ordering code is HFP+bore size+option (e.g., HFP20□). Dimensions for the single-acting type are shown in parentheses. It is suitable for automated handling, gripping, and similar applications.

HFT Series Wide-Opening Grippers

HFT Series Wide-Opening Grippers

The HFT series wide-opening gripper is a pneumatically driven parallel gripper. A cylinder drives the jaws to grip workpieces over a wide opening and long stroke, making it suitable for picking up and positioning larger workpieces. Five bore sizes are available: 10, 16, 20, 25 and 32. The number after × in the model designation indicates the gripping stroke, ranging from 20~250mm, with configurations from HFT10×20 to HFT32×250. During operation, ensure that the gripping point distance R is within the effective gripping force curve for the corresponding air pressure, and allow a gripping force margin based on the workpiece weight. Jaw attachments should be as light and short as possible to prevent excessive opening and closing inertia from reducing service life. Select locking screws from M4×0.7, M5×0.8, M6×1.0 and M8×1.25 according to the model. Tighten them to the specified maximum tightening torque, install jaw attachments with the piston rod retracted, and fit a drop-prevention device to prevent injury from falling workpieces.

MHS Series Parallel Pneumatic Grippers

MHS Series Parallel Pneumatic Grippers

The MHS series of parallel-opening pneumatic grippers includes the MHS3 three-finger and MHS4 four-finger configurations, with bore sizes of 16, 20, 25, 32, 40, 50 and 63mm. A parallel opening and closing mechanism synchronizes the fingers, providing stable gripping force and high repeat positioning accuracy. These grippers are suitable for automated workpiece handling, transfer, positioning and assembly. The operating pressure is 0.2~0.6MPa for the 16mm bore and 0.1~0.6MPa for bore sizes of 20mm and above. Models are designated as “MHS3/MHS4-bore size D”, allowing selection by finger count and bore size. Magnetic switches can also be fitted to detect open and closed positions.

HFC Series Pneumatic Gripper (Parallel Opening and Closing)

HFC Series Pneumatic Gripper (Parallel Opening and Closing)

The HFC series is a double-acting pneumatic gripper with parallel opening and closing. It uses air as the working medium, filtered through a screen rated 40μm or greater. Operating pressure is 0.2~0.7MPa, operating temperature is -20~70℃, repeatability is ±0.01mm, maximum operating frequency is 120 cycles/minute, and the port size is M3×0.5. The compatible sensor switch is DS1-H. All models have a built-in magnet and a standardized internal structure for high gripping force. A cushion at the front of the piston reduces impact noise during gripping, while locating pin holes on the bottom improve mounting accuracy and positioning consistency during repeated removal and reinstallation. Three-jaw (Y) and four-jaw (X) configurations are available, with bore sizes of 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The grippers are suitable for handling workpieces of various shapes in automated equipment.

STMB/STMS Series Twin-Piston Cylinders

STMB/STMS Series Twin-Piston Cylinders

The STMB/STMS series consists of twin-piston cylinders available with body or slide mounting. The twin-piston design offers high resistance to bending and torsion, allowing it to handle substantial moving or lateral loads. Bumpers or hydraulic shock absorbers at both ends reduce impact speed and extend service life. Standard bore sizes are 10, 16, 20, and 25 mm. The working medium is air, with an operating pressure of 1.0~9.0 kgf/cm², proof pressure of 13.5 kgf/cm², operating temperature of -20~70℃, operating speed of 30~500 mm/s, stroke tolerance of -1.0 mm, non-rotation angle of ±0.1°, and port size of M5×0.8. Optional high-temperature sealing materials allow operation at 150℃. STMB standard strokes are 25/50/75/100 mm, with a maximum stroke of 200 mm and an allowable stroke of 250 mm. STMS standard strokes are 100/150 mm, with a maximum stroke of 200 mm and an allowable stroke of 250 mm.

MXS Series Pneumatic Slide Table (Dual-Cylinder Type)

MXS Series Pneumatic Slide Table (Dual-Cylinder Type)

The MXS series pneumatic slide table uses two cylinders arranged side by side and a crossed-roller guide for high rigidity and resistance to offset loads. It is suitable for factory automation applications requiring high-precision linear reciprocating motion while supporting an overhung load. Six standard bore sizes are available: MXS6, MXS8, MXS12, MXS16, MXS20, and MXS25, with bores of φ6×2, φ8×2, φ12×2, φ16×2, φ20×2, and φ25×2, respectively. The combined cross-sectional areas of the paired cylinders are equivalent to bores of φ8, φ11, φ17, φ22, φ28, and φ35, respectively. The slide table uses air as its working medium and operates in a double-acting configuration. Selection must be checked against the concentrated load W, overhang Ln, moment center position correction value An, operating and mounting factor K, and allowable concentrated load factor β. The maximum allowable concentrated loads for the respective sizes are 0.6, 1, 2, 4, 6, and 9 kg, each with its corresponding allowable moment. If these limits are exceeded, reduce the load or select a larger bore.

MXQ Series Twin-Cylinder Pneumatic Slide Table (Recirculating Linear Guide)

MXQ Series Twin-Cylinder Pneumatic Slide Table (Recirculating Linear Guide)

The MXQ series twin-cylinder pneumatic slide table features a recirculating linear guide and a twin-cylinder (twin-rod) drive for high rigidity and resistance to off-center loads. It is suitable for automated precision positioning, transfer, and clamping applications. Bore sizes range from φ6×2 to φ25×2 (equivalent bore φ8~φ35), with six models: MXQ6, MXQ8, MXQ12, MXQ16, MXQ20, and MXQ25. The double-acting slide uses air as its working medium, with a maximum operating pressure of 0.7MPa and a minimum of 0.15MPa. Ambient and fluid temperatures range from -10~+60℃ (no freezing), and slide speed is 50~500mm/s (50~200mm/s with a metal stopper). Cushioning options include rubber cushioning (standard), a hydraulic shock absorber, or no cushioning (metal stopper). Stroke length tolerance is ±1mm; lubrication is not required. Port threads are M5×0.8 for MXQ6~MXQ20 and Rc1/8 for MXQ25.

HLH Series Side-Rail Precision Slide Table Cylinder

HLH Series Side-Rail Precision Slide Table Cylinder

This side-rail precision slide table cylinder integrates a miniature recirculating ball linear guide with a pneumatic cylinder, providing excellent straightness and high anti-rotation accuracy for precision assembly applications. Bore sizes are 6/10/16/20 mm, with corresponding guide rail (linear bearing) widths of 5/7/9/12 mm. Standard strokes range from 5~60 mm (maximum 30 for bore size 6, 50 for bore size 10, and 60 for bore sizes 16 and 20). Contact the manufacturer for custom strokes. Minimum operating pressures are 0.15/0.06/0.05/0.1 MPa. The cylinder can be mounted from 4 directions and connected to piping from 3 directions. The slide table, body, piston and rear cover are alloy; the piston rod and guide rail are stainless steel; the balls are SUS304; and the seals are NBR. Stroke code S indicates a built-in magnet for use with a sensor switch.

HLH Series Side-Rail Precision Slide Table Cylinder

HLH Series Side-Rail Precision Slide Table Cylinder

The HLH series side-rail precision slide table cylinder integrates a miniature recirculating-ball linear guide with a pneumatic cylinder, making it suitable for precision assembly, positioning, and short-stroke linear motion. It offers good straightness and anti-rotation accuracy. The cylinder body can be mounted from 4 directions, and piping can be connected from 3 directions. Bore sizes are 6, 10, 16, and 20 mm, with corresponding guide rail widths of 5, 7, 9, and 12 mm. Standard stroke ranges for the respective bore sizes are 5~30 mm, 5~50 mm, 5~60 mm, and 5~60 mm; strokes beyond the standard range can be custom ordered. The finished product order code consists of HLH, the bore size, the stroke, and the stroke code S (with magnet).

HLQ/HLQL Series Multi-Shaft Precision Slide Bushing Cylinder (Recirculating Ball)

HLQ/HLQL Series Multi-Shaft Precision Slide Bushing Cylinder (Recirculating Ball)

The HLQ/HLQL series comprises multi-shaft precision slide bushing cylinders with recirculating-ball linear guides. The integrated piston rod and guide shaft arrangement accommodates moderate off-center loads and torque, making the cylinders suitable for automated clamping, pressing, positioning and other applications requiring high-precision linear guidance. Six bore sizes are available: 6, 8, 12, 16, 20 and 25mm, all with a 10mm rail width. The operating medium is compressed air filtered through a 40μm or higher-grade filter. Operating pressure is 0.15~0.7MPa (approximately 1.5~7.0bar), proof pressure is 1.2MPa, operating temperature is -20~70℃, and operating speed is 50~500mm/s. Cushioning options include fixed front-end cushioning or hydraulic shock absorbers. Port threads are available in M5×0.8 and PT1/8, with G or NPT threads also optional. Major components include aluminum alloy mounting plates and slide bushings, medium-carbon steel or low-alloy steel hex socket ball-head screws, free-cutting steel floating joints, brass pistons and magnet holders, and NBR shaft and piston O-rings. The cylinders offer a compact design, high guiding accuracy and long service life.

HLS/HLSL Series Twin-Shaft Precision Slide Table Cylinder (Roller Type)

HLS/HLSL Series Twin-Shaft Precision Slide Table Cylinder (Roller Type)

The HLS/HLSL series twin-shaft precision slide table cylinder (roller type) features a twin-shaft guide structure and a roller-type linear guide mechanism, offering high rigidity, precise guidance and strong resistance to offset loads. It is suitable for precision positioning, handling, pushing and clamping in automated equipment. Six bore sizes are available: 6, 8, 12, 16, 20 and 25mm. The working medium is compressed air filtered to 40μm or better. The operating pressure range is 0.15~0.7MPa (22~100psi, 1.5~7.0bar), with a guaranteed pressure resistance of 1.2MPa (17psi, 12.0bar). The operating temperature is -20~70℃ and the operating speed range is 50~500mm/s. Accessories such as a retraction-end stroke adjustment screw assembly and a hydraulic shock absorber assembly can be added to limit the retraction stroke and absorb impact. Mounting methods and external dimensions vary by bore size, allowing interchangeability with standard cylinders.

AF Series Retract-End Stroke Adjustment Assembly

AF Series Retract-End Stroke Adjustment Assembly

The AF series retract-end stroke adjustment assembly is an accessory mounted on the retract end of a standard cylinder to limit its return end position and absorb impact at the end of the stroke. Three configurations are available: a retract-end stroke adjustment screw assembly, a retract-end hydraulic shock absorber assembly, and a retract-end stroke adjustment assembly. All are compatible with standard cylinders with 6, 8, 12, 16, 20, and 25 mm bores. The stroke adjustment range is 5 mm, with an adjustment screw (M2.5~M6) for fine-tuning the return end position. Body mounting threads range from M6×10~M14×15, and overall dimensions A~K increase with bore size. The assemblies are suitable for applications requiring precise control of the cylinder's retracted position and reduced end-of-stroke impact and noise. They can improve positioning repeatability and extend cylinder service life.

MK Series Fixed Multi-Position Cylinders

MK Series Fixed Multi-Position Cylinders

The MK series of fixed multi-position cylinders includes MK, MKD and MKJ (double-acting) models, as well as MSK and MTK (single-acting, extending and retracting) models. Bore sizes range from 6, 10, 16, 20, 25 to 32mm. The operating medium is compressed air filtered to 40μm or finer. The operating pressure range is 0.15~1.0MPa (22~145psi) for double-acting models and 0.2~1.0MPa (22~145psi) for single-acting models. The fixed multi-position design allows stops at multiple predetermined stroke positions, making these cylinders suitable for automated clamping, pressing and conveying applications that require multiple positioning points. The body is compact and offers flexible mounting options.

MD Series Cylinders

MD Series Cylinders

MD series cylinders are pneumatic actuators available in double-acting (MD, MDJ) and single-acting versions (MSD single-acting extension and MTD single-acting retraction). Bore sizes are 6, 10, 16, 20, 25, and 32 mm. The working medium is compressed air filtered through a filter rated 40μm or above. Operating pressure is 0.15–1.0 MPa (22–145 psi) for double-acting models and 0.2–1.0 MPa (28–145 psi) for single-acting models. Proof pressure is 1.5 MPa (215 psi), and operating temperature is -20–70°C. G or NPT port threads are available. Applications include automated clamping, pushing, and positioning. The original stroke table and some cushioning, speed, and port size data are incomplete due to scan damage. Confirm bore size, action type, and stroke when selecting a model.

MSD Series Cylinders

MSD Series Cylinders

The MSD series comprises double-acting and single-acting pneumatic cylinders, divided into three types by operation: MD/MDJ (double-acting), MSD (single-acting extension), and MTD (single-acting retraction). Six bore sizes are available: 6, 10, 16, 20, 25, and 32mm. They support pushing, pulling, ejecting, and clamping in compact automation equipment. The operating medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.15~1.0MPa (22~145psi) for double-acting models and 0.2~1.0MPa (28~145psi) for single-acting models. The proof pressure is 1.5MPa (215psi), and the operating temperature is -20~70℃. G and NPT port threads are available for compatibility with domestic and international piping. Select a model based on bore, stroke, action type (double-acting or single-acting), and port thread. A cushioned design is available for applications subject to greater impact.

MTD Series Cylinders

MTD Series Cylinders

The MTD series is a family of air-operated compact and pen-style cylinders, including MD/MDJ double-acting models and MSD/MTD single-acting models (single-acting push and single-acting pull types). Six bore sizes are available: 6, 10, 16, 20, 25, and 32 mm, with a choice of stroke lengths. Mounting features at both ends of the piston include 2-ΦK through-holes and ΦJ counterbores (depth JA). The overall dimension varies linearly with stroke, expressed as AC+stroke. The operating medium is compressed air filtered through a 40μm or finer filter. Operating pressure is 0.15~1.0 MPa (22~145 psi) for double-acting models and 0.2~1.0 MPa (28~145 psi) for single-acting models. Proof pressure is 1.5 MPa (215 psi), and operating temperature is -20~70 ℃. G or NPT port threads are available. These cylinders are suitable for short-stroke clamping, pushing, and positioning in electronics, packaging, assembly, and other applications.

MDJ Series Cylinders

MDJ Series Cylinders

The MDJ series includes MD/MD/MDJ double-acting cylinders and MSD/MTD single-acting cylinders in extension and retraction types. The operating medium is air filtered through a 40μm or finer filter. Bore sizes are 6, 10, 16, 20, 25, and 32 mm. Operating pressure is 0.15-1.0 MPa for double-acting models and 0.2-1.0 MPa for single-acting models. Proof pressure is 1.5 MPa, and operating temperature is -20-70℃. G or NPT port threads are available. Dimensions include through-holes, counterbores, and stroke-dependent mounting dimensions. Select the model based on bore size, action type, stroke, and port thread type.

CU Series Cylinders

CU Series Cylinders

The CU series cylinders are compact pneumatic actuators available in six bore sizes: 6, 10, 16, 20, 25, and 32 mm. They use air as the operating medium and are available in double-acting and single-acting (spring return/spring extend) configurations, with a choice of basic or built-in magnetic ring versions. Depending on the bore size and operating type, the minimum operating pressure ranges from 0.05 to 0.23 MPa. They are suited to clamping, pressing, and positioning applications in automated equipment where space is limited. When selecting a cylinder, confirm the complete model number based on bore size, stroke, operating type, and whether a magnetic ring is required.

CUJB Series Miniature Free-Mount Cylinders

CUJB Series Miniature Free-Mount Cylinders

CUJB series miniature free-mount cylinders feature a compact body and can be mounted in multiple orientations in confined spaces. Bore sizes are 4, 6, 8, 10, 12, 16 and 20 mm. They are available in double-acting or single-acting (spring-return) versions and use air as the working medium. Maximum operating pressure is 0.7 MPa; minimum operating pressure is 0.15/0.1/0.07/0.05 MPa depending on bore size. The catalog also provides dimension tables for non-rotating rod and built-in magnet types, as well as double-acting and single-acting (spring-return/spring-extend) versions. These cylinders are suitable for short-stroke pushing, positioning and clamping in automated equipment for electronics assembly, inspection, fixturing and packaging. Select the appropriate bore, stroke, action and mounting accessories for the application.

CUK Series Non-Rotating Rod Cylinders

CUK Series Non-Rotating Rod Cylinders

CUK series non-rotating rod cylinders have a built-in magnetic ring and are available in double-acting and single-acting (spring-return/spring-extend) configurations. An anti-rotation mechanism prevents the piston rod from rotating, making these cylinders suitable for applications requiring workpiece rotation prevention and precise positioning. The built-in magnetic ring enables position detection when used with a magnetic switch. Six bore sizes are available: 6, 10, 16, 20, 25, and 32 mm. Overall and mounting dimensions are provided for each size, including A, A', B, C, D, E, F, FL, FK, FY, GA, GB, H, J, K, L, MM, NA, NB, NN, ΦP, Q, R, ΦT, U, and Y. Separate dimension tables for double-acting and single-acting (spring-return) models simplify selection and installation.