Pneumatic Components — Page 18

HMQR Series Low-Torque Rotary Joints

HMQR Series Low-Torque Rotary Joints

The HMQR series consists of low-torque rotary joints with a gap-sealed design that minimizes rotational resistance and starting torque. They are suitable for pneumatic and fluid circuits requiring continuous or intermittent rotation without imposing significant reaction forces on the piping. Model numbers combine the series code HMQR, type code, size number, and port thread specification, as in HMQR F 4 - M5. The ports connect to piping using metric fine threads such as M5. Key selection criteria include port thread size, allowable rotational speed and working pressure, media compatibility, and mounting method. The series is well suited to compact installations such as rotary stations in automated equipment, indexing tables, and robot end effectors.

CV Series Check Valves

CV Series Check Valves

The CV series consists of inline pneumatic check valves that allow airflow in one direction and prevent reverse flow. They are commonly installed in circuits between cylinders, air preparation components, and directional control valves. The straight-through valve body uses an internal valve element and spring to open in the forward direction and seal against reverse flow. During installation, observe the airflow direction arrow marked on the valve body. The model code has three parts: series code CV + two-digit port size code + thread type code. Eight port sizes are available: 06(1/8″), 08(1/4″), 10(3/8″), 15(1/2″), 20(3/4″), 25(1″), 40(1-1/2″), and 50(2″), accommodating pneumatic lines from small-diameter tubing to high-flow main lines. Thread type codes are blank (PT thread), G(G thread), and T(NPT thread), corresponding to regional thread standards for compatibility with piping in different countries. Select the port size and thread type codes according to the connected line's internal diameter and thread standard.

K Series Vibrators

K Series Vibrators

K Series vibrators are pneumatic vibrators that use compressed air to drive an internal vibrating element and generate high-frequency vibration. Mounted on the exterior walls of bins, hoppers, chutes, pipes, and conveying equipment, they promote the flow of powders and granular materials, break up arches, prevent blockages, and compact material. The series is available in eight sizes, designated by the series code K followed directly by the size number: 8, 10, 13, 16, 20, 25, 32, and 36. Sizes 8~25 have 1/4" connection threads, while sizes 32 and 36 have 3/8" connection threads. They can be connected directly to a plant's compressed air lines. Compact and free of electrical components, these vibrators are safe for use in explosive environments and require little maintenance. Vibration force and frequency can be changed simply by adjusting the air pressure. They are widely used for material handling and storage in the food, chemical, plastics, and building materials industries.

SK Series Pneumatic Impact Hammers

SK Series Pneumatic Impact Hammers

SK series pneumatic impact hammers, also known as air hammers, are pneumatic vibration devices that use compressed air to drive a hammer head in repeated impacts. Like K series pneumatic vibrators, they belong to the broader vibrator category. Models are designated by the series code SK followed by the port size code, and are available in four sizes: SK30, SK40, SK60 and SK80. Port codes 30, 40 and 60 correspond to a 1/4" threaded connection, while port code 80 corresponds to a larger 3/8" threaded connection. Larger port codes indicate a larger hammer body and greater impact energy. These hammers are commonly used on bins, hoppers, chutes and pipes to break up bridging, prevent blockages and promote material flow. Compressed air is switched on and off at timed intervals or as needed, causing the hammer head to strike the wall repeatedly and dislodge adhering or bridged powders and granular materials. They can also provide vibration assistance for molds, castings and conveying troughs. For installation, the hammer is secured to the surface to be struck using a flange or threaded base. Automatic control can be achieved with a two-position, three-way solenoid valve and air preparation components. To select a model, first determine the required impact force based on bin capacity, wall thickness and material flowability, then select the port code and connection size, and confirm that the air supply pressure and flow rate meet the requirements.

ZH Series Vacuum Generators

ZH Series Vacuum Generators

The ZH series consists of pneumatic vacuum generators (vacuum ejectors) that use compressed air discharged at high speed through a nozzle to create negative pressure and generate a vacuum at the suction cup. They are used to pick up, transfer, and position workpieces in automated assembly, packaging, electronics, and lithium battery production lines. The series uses a multi-part model code in the format “ZH + nozzle specification + body/structure code + function code + accessory code - connection size.” The complete example on this page is ZH 10 D S A - 06, where the final segment -06 indicates a 6 mm-class connection size. Key selection criteria include nozzle diameter, which determines suction flow rate and ultimate vacuum; body type (inline, box, or multistage); whether a silencer and supply valve are included; and connection size and mounting method.

C-Type Quick Joints, SMV/SML Series

C-Type Quick Joints, SMV/SML Series

C-Type quick joints are used to quickly connect hoses to threaded ports and distribute air in pneumatic lines. They are available with round bodies and multi-port branch configurations. The catalog lists the SMV round series (including round two-way female-threaded, round two-way 4-fen female-threaded, and round three-way female-threaded models) and the SML straight multi-port series (two-way SML-2, three-way SML-3, four-way SML-4, and five-way SML-5). Connection types include female threads, with 4 fen (1/2 inch) among the common sizes. These joints are suitable for pneumatic piping, branch air supply to equipment, and applications requiring frequent connection and disconnection. Refer to the actual product and full catalog specifications for materials, pressure ratings, and compatible media.

C-Type Quick Couplings, SMV/SML Series

C-Type Quick Couplings, SMV/SML Series

C-Type quick couplings provide quick connections and air distribution between hoses and threaded ports in air lines. They feature round bodies or multi-port branch configurations. The catalog lists the SMV round series (including round 2-way female-threaded, round 2-way 4-fen female-threaded, and round 3-way female-threaded models) and the SML straight multi-port series (straight 2-way SML-2, straight 3-way SML-3, straight 4-way SML-4, and straight 5-way SML-5). Port types include female threads, with common sizes including 4 fen (1/2 inch). They are suitable for pneumatic system piping, branch air supply to equipment, and applications requiring frequent disconnection and reconnection. Refer to the actual product and complete catalog specifications for materials, pressure ratings, and compatible media.

AR-TS Series T-Brackets for Air Preparation Components

AR-TS Series T-Brackets for Air Preparation Components

The AR-TS series consists of T-shaped mounting brackets for air preparation components, available in standard AR-TS and extended AR-TS-L versions. The catalog specifies bracket dimensions using A and L: AR-TS has A=200mm and L=110mm; AR-TS-L has A=350mm and L=270mm, accommodating different mounting distances. The port thread is PT 1/4″, and the accessory is PM20. The brackets are suitable for securing and extending the mounting position of air preparation components such as air filters and pressure regulators.

Air Blow Guns

Air Blow Guns

Air blow guns use compressed air to remove dust and clean the surfaces of factory equipment, molds, and parts. They can also be used for drying and cooling. The range includes A001, A018, and CS1 models with PT1/4" air inlet connections. Nozzle options include standard, long, small, adjustable-flow, and large-bore nozzles. PM20 and quick-connect fittings are available as accessories. Models come in various lengths, including 25~350mm, for use in confined spaces or at a distance.

PU/PE Series Pneumatic Tubing

PU/PE Series Pneumatic Tubing

PU/PE series pneumatic tubing carries compressed air in pneumatic systems. PU (polyurethane) tubing offers good flexibility, resistance to repeated bending fatigue, rapid recovery, and good oil resistance. It is suitable for dynamic applications such as fixtures, robotic arms, and high-frequency reciprocating motion. PE (polyethylene) tubing is lightweight, economical, and offers good chemical resistance, making it suitable for fixed air lines. Tubing sizes are specified by outside diameter × inside diameter, with common sizes including 4×2.5, 6×4, 8×5, 10×6.5, and 12×8 mm. Colors include red, black, blue, and transparent for easy identification of air lines. Key specifications include outside diameter, inside diameter, material, color, working pressure, and operating temperature range. Select the outside diameter based on the required flow rate and available installation space, then choose PU or PE according to the working pressure, ambient temperature, and media compatibility. The tubing is typically used with pneumatic accessories such as push-in fittings and tubing cutters.

SC Series Standard Cylinders

SC Series Standard Cylinders

SC series standard cylinders are available in six bore sizes: 32, 40, 50, 63, 80 and 100 mm. The two main types are the SC basic type and the SCD double-rod type. The cylinder body and front cover are made of aluminum alloy, the piston rod is ground S45C carbon steel, the seals are NBR and TPU, and the threaded bushing is made of wear-resistant material. The compact design provides durability and wear resistance. Bore sizes from 32~100 mm use air inlet port threads of PT1/8, PT1/4, PT3/8 or PT1/2, and piston rod end threads range from M10×1.25 to M20×1.5. A magnetic version is available for position detection with magnetic switches. Magnetic and non-magnetic versions have identical external and mounting dimensions for easy interchangeability. The catalog also provides the full range of A, AB, AC, AD, AE, B, D, DA, E, EA, F, FA, H, K, KA, KB, M, MA, P, PA and PB dimensions for each bore size, for use in mounting hole layout and product selection. These cylinders are commonly combined with solenoid valves, connection blocks, APC/APH fittings and PU tubing to form a complete pneumatic actuation circuit.

SCD Series Standard Cylinder

SCD Series Standard Cylinder

The SCD series standard cylinder is a pneumatic actuator with an aluminum alloy cylinder body, a ground S45C carbon steel piston rod, and aluminum alloy front and rear covers. Its seals are made of NBR/TPU, and its wear components are made of wear-resistant materials. It is suitable for linear push-pull, clamping, lifting, and similar applications in automated equipment. Standard bore sizes are 32, 40, 50, 63, 80, and 100 mm. Magnetic and non-magnetic versions have identical mounting dimensions. The external specification table lists mounting and connection parameters including A, AB, AC, AD, AE, B, D, DA, E, EA, F, FA, H, K, KA, KB, M, MA, P, PA, and PB. Port sizes range from PT1/8 to PT1/2. Various mounting configurations are available (SC, SCD).

SC Series Standard Cylinders (Large Bore)

SC Series Standard Cylinders (Large Bore)

SC series large-bore standard cylinders feature an aluminum alloy barrel and end caps, an S45C hardened piston rod, and NBR/TPU seals. Their square, four-tie-rod construction provides high rigidity and resistance to off-center loads, making them suitable for high-force, heavy-duty linear pushing, lifting, and clamping applications. The catalog lists four bore sizes: 125, 160, 200, and 250 mm. Three mounting types are available: SC (basic type), SCD, and SCJ. Select a model based on the mounting method and required stroke. The model number generally combines the mounting type code, bore, and stroke (e.g., SC125×100). The exposed end of the piston rod is threaded for direct connection to various fittings, floating joints, and fixtures. These cylinders are widely used in packaging, assembly, stamping, welding fixtures, and custom automation equipment.

SCT Series Compact Cylinders

SCT Series Compact Cylinders

The SCT series comprises compact, low-profile cylinders available in six bore sizes: 32, 40, 50, 63, 80, and 100 mm. They are suitable for clamping, pushing, lifting, and positioning in applications with limited installation space. The cylinder body, front and rear covers, and mounting block are made of aluminum alloy for low weight and good heat dissipation. The piston rod is made of wear-resistant S45C hard steel, with a wear-resistant surface and resistance to side loads. The piston is made of wear-resistant material, and the seals combine NBR and TPU for airtightness and long reciprocating service life. An optional internal magnet enables stroke endpoint detection when used with a magnetic switch. A silencer can be fitted to the exhaust port to reduce noise. The catalog provides mounting dimensions for each bore size, including external diameter, pitch, and length, for straightforward replacement and design selection.

SG/SGC Series Double-Acting Cylinders

SG/SGC Series Double-Acting Cylinders

The SG/SGC series consists of double-acting, tie-rod pneumatic cylinders with standard bore sizes of 125, 160, 200, and 250 mm. The working medium is compressed air filtered through a 40μm or larger filter screen. The operating pressure range is 0.15~1.0 MPa (22~145 psi / 1.5~10.0 bar), with a proof pressure of 1.5 MPa (21 psi / 15 bar). The operating temperature is -20~70℃, the operating speed range is 30~500 mm/s, and the stroke tolerance range is 0~250 mm. A wide range of mounting configurations is available: SG and SGC cylinders can be supplied in basic, FA, FB, CA, CB, CR, LB, TC, FCT, TCM1, or TCM2 configurations; SGD, SGCD, SGJ, and SGCJ cylinders can be supplied in basic, FA, LB, TC, FCT, TCM1, or TCM2 configurations. Flanges, foot mounts, trunnions, and other accessories are available to suit the bore size. Components include nuts, clevis rods, front and rear covers, threaded sleeves, clevises, socket head bolts, tie rods, and tie-rod nuts. Magnetic and non-magnetic versions have identical mounting dimensions, making it easy to add position sensing switches.

SGD Series Cylinders

SGD Series Cylinders

The SGD series consists of standard double-acting cylinders available in several body styles, including SG, SGC, SGD, SGCD, SGJ and SGCJ. This page covers four large bore sizes: 125, 160, 200 and 250mm. The working medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.15~1.0MPa (22~145psi / 1.5~10.0bar), proof pressure is 1.5MPa (21psi / 15bar), operating temperature is -20~70℃, operating speed range is 30~500mm/s, and stroke tolerance range is 0~250. All models are double-acting, with an adjustable double-acting option for applications requiring end-of-stroke cushioning and fine position adjustment. A wide range of mounting options is available: SG and SGC series support basic, FA, FB, CA, CB, CR, LB, TC, FCT, TCM1 and TCM2 mounts; SGD, SGCD, SGJ and SGCJ series support basic, FA, LB, TC, FCT, TCM1 and TCM2 mounts. Magnetic and non-magnetic versions have identical external and mounting dimensions, allowing direct interchangeability and

SGCD Series Standard Cylinder

SGCD Series Standard Cylinder

The SGCD series is a double-acting standard cylinder available in 125, 160, 200, and 250 mm bore sizes. Its working medium is air filtered through a filter rated 40μm or higher. It has an operating pressure of 0.15~1.0 MPa, a pressure resistance of 1.5 MPa, an operating temperature range of -20~70℃, and an operating speed of 30~500 mm/s. SGD, SGCD, SGJ, and SGCJ types are available with basic, FA, LB, TC, FCT, TCM1, TCM2, and other mounting options; SG and SGC also offer FB, CA, CB, CR, and other mounting options. Cylinder components include the front cover, rear cover, sleeved rod, nut, threaded sleeve, and seals. Magnetic and non-magnetic versions have identical mounting dimensions.

SGJ Series Cylinders

SGJ Series Cylinders

The SGJ series consists of double-acting cylinders for pneumatic systems using air filtered through a 40μm or larger filter. The standard specifications on this page cover bore sizes of 125, 160, 200, and 250 mm, a working pressure range of 0.15~1.0 MPa (22~145 psi / 1.5~10.0 bar), a pressure resistance of 1.5 MPa, an operating temperature of -20~70℃, an operating speed range of 30~500 mm/s, and a stroke tolerance range of 0~250. SGJ cylinders are available in a basic configuration and with FA, LB, TC, FCT, TCM1, and TCM2 mounting options. Magnetic and non-magnetic versions have the same dimensions. They are suitable for pushing, pulling, clamping, positioning, and other general industrial automation applications.

SGCJ Series Cylinders

SGCJ Series Cylinders

The SGCJ series consists of double-acting cylinders with standard catalog bore sizes of 125, 160, 200, and 250 mm. The working medium is air filtered through a 40 μm or larger filter. The operating pressure range is 0.15~1.0 MPa, pressure resistance is 1.5 MPa, operating temperature is -20~70 ℃, operating speed range is 30~500 mm/s, and stroke tolerance range is 0~250 mm. SGCJ mounting options include basic, FA, LB, TC, FCT, TCM1, and TCM2, making the cylinders suitable for linear reciprocating motion, clamping, and pushing applications in factory automation equipment.

MBB Series Standard Cylinders

MBB Series Standard Cylinders

The MBB series of standard cylinders includes the basic MBB model and variants such as MBBD and MBBJ, with seven bore sizes: 32, 40, 50, 63, 80, 100 and 125 mm. The operating medium is compressed air filtered through a 40μm filter. Operating pressure is 0.1~1.0MPa (14~145psi), proof pressure is 1.5MPa (215psi), operating temperature is -20~80℃, and operating speed is 30~800mm/s. The cylinders feature adjustable cushioning and a stroke tolerance range of 0~250. Standard strokes include 24, 32, 37.5, 40, 50, 63, 80, 100, 125 and 150mm. Mounting options include the basic type and accessories such as FA, FB, CA, CB, CR, LB, TC, TCM1 and TCM2. These cylinders are suitable for linear pushing and pulling, clamping and positioning in automated equipment.

FTC Series Standard Cylinders

FTC Series Standard Cylinders

The FTC series comprises standard cylinders powered by compressed air filtered through a 40μm filter. Bore sizes are 32, 40, 50, 63, 80, 100 and 125 mm. The operating pressure range is 0.1~1.0 MPa (14~145 psi), the pressure holding rating is 1.5 MPa, the operating temperature is -20~80°C, and the operating speed range is 30~800 mm/s. The cylinders feature adjustable cushioning. Multiple standard strokes from 24~150 mm are available, along with basic and FA, FB, CA, CB, CR, LB, TC, TCM1 and TCM2 mounting styles, corresponding to the mounting configurations of the MBB, MBBD and MBBJ series. They are suitable for pneumatic actuation in automated fixtures, conveying, positioning and similar applications.

QGA/QGB Series Standard Cylinders

QGA/QGB Series Standard Cylinders

The QGA/QGB series comprises standard double-acting cylinders with bores from Φ32 to Φ400. QGA models have no cushioning, while QGB models have adjustable cushioning. Models from Φ32 to Φ100 use high-quality aluminum alloy cylinder tubes with hard roll-burnished inner surfaces (approximately 30μm thick, hardness MHV400); models from Φ125 to Φ400 use high-precision, ground steel cylinder tubes. The piston rod surface is hard roll-burnished to a hardness of HV1000. The working medium is compressed air filtered through a 40μm or higher-grade filter. Operating pressure is 0.15~1.0MPa, proof pressure is 1.5MPa, and operating temperature is 0~70℃. Standard strokes range from 25~2000mm, maximum strokes range from 500~2000mm depending on bore size, and cushion strokes range from 12~60mm. Mounting styles include basic, FA, FB, CA, CB, CR, LB, TC, FTC, TCM1, and TCM2.

I Series Y-Joint Clevis

I Series Y-Joint Clevis

The Y-joint clevis is a mechanical attachment fitted to the end of a cylinder piston rod. It transfers cylinder force to the driven mechanism through a pivot pin, accommodating angular and positional misalignment between the cylinder axis and the load's direction of motion. This reduces lateral forces on the piston rod and extends the life of the cylinder and its seals. The series is available in four bore size ranges: 40, 50/63, 80 and 100, corresponding to models I-04A, I-05A, I-08A and I-10A. The clevis body is made of steel, and the piston rod connection threads are M14×1.5, M18×1.5, M22×1.5 and M26×1.5, respectively. Dimensions A, A₁, E₁, L₁, R₁, U₁, NDH10 and NX increase with cylinder bore size. These joints are widely used with standard cylinders such as QGB/QGA in push-pull mechanisms, swing arms, tilting plates, clamping systems and other automated applications requiring a pivoting connection. To select a model, first determine the cylinder bore size, then check the thread specification and available mounting space.

SE Series Standard Cylinders

SE Series Standard Cylinders

SE series standard cylinders are available in seven bore sizes: 32, 40, 50, 63, 80, 100 and 125mm. Three mounting configurations are available: SE (basic type), SED and SEJ. The overall and mounting dimensions of each model match those of the SE standard type. The cylinder barrel, front cover and piston are made of aluminum alloy; the piston rod is made of S45C carbon-manganese-chromium-silicon steel; and the nuts, socket-head bolts and self-tapping screws are made of carbon steel or stainless steel. The front cover O-ring, piston O-ring, wear-ring seals and similar components are made of TPU; O-rings are made of NBR; and the wear rings and bushings are made of wear-resistant materials. The catalog provides the A, AB, AC, AD, AE, B, D, DA, E, F, FA, H, K, M, N, P, PA and PB dimensions for each bore size, as well as the thread specifications at E (M10×1.25~M27×2) and port threads at P (PT1/8~PT1/2). A magnetic version is also available; the non-magnetic version with a carbon steel frame has the same dimensions. Suitable for linear lifting, clamping and positioning in general industrial automation.

DNC Series Cylinders

DNC Series Cylinders

SNS DNC series standard cylinders are double-acting and use air filtered through an approximately 40μm filter. Bore sizes are 32, 40, 50, 63, 80, 100, and 125 mm. Various mounting accessories are available: the basic DNC model supports FA, FB, CA, CB, CR, LB, TC, FTC, TCM1, and TCM2; the DNCJ series is available in a basic version and with FA, LB, TC, ETC, TCM1, and TCM2 options. The catalog provides mounting dimensions such as A, AA, B, C, CA, E, F, and G for accessories including TC, FTC, TCM1, and TCM2 at each bore size. Users can select a mounting method based on bore size and allow sufficient installation space. Accessory mounting positions cannot be adjusted freely.

DNCJ Series Standard Cylinders

DNCJ Series Standard Cylinders

The DNCJ series comprises double-acting standard cylinders available in seven bore sizes: 32, 40, 50, 63, 80, 100, and 125 mm. The operating medium is compressed air filtered through an approximately 40μm filter. The cylinder body is made from an aluminum alloy profile, and a range of mounting accessories is available to suit different applications. DNCJ mounting options include basic, FA, LB, TC, ETC, TCM1, and TCM2; the related DNC series also offers FB, CA, CB, CR, and FTC options. The catalog lists overall and mounting dimensions such as A, AA, B, C, CA, E, F, and G for each mounting accessory by bore size, simplifying selection and equipment layout. Note that accessory mounting positions cannot be adjusted arbitrarily. When selecting a cylinder, check the mounting hole locations and required clearance against the dimension table for the relevant bore size and mounting type.

ES Series Spherical Clevis Mount

ES Series Spherical Clevis Mount

The ES series spherical clevis mount, including JA / JAH clevises, is a pivot mounting accessory for cylinders. Its forked clevis connects to the rear of the cylinder or a trunnion with a pin, while the spherical bearing accommodates approximately ±0.5° of mounting misalignment. This compensates for assembly misalignment and reduces side loading on the piston rod. It is commonly used in pivoting applications with ISO 15552 / CJ series standard cylinders. Select the product by cylinder bore: bore sizes 32, 40, 50/63, 80/100, and 125 mm correspond to piston rod threads M10×1.25, M12×1.25, M16×1.5, M20×1.5, and M27×2, respectively. The catalog lists overall dimensions A, B, C, ΦD, E, F, G, H, P, and U, along with load, mass, allowable misalignment, and other specifications. Loads range approximately from 70~1080 kN. The mounts are generally made of carbon steel with zinc plating or a black oxide finish for corrosion protection. Select and order by cylinder bore and rod-end thread.

MSAL/MTAL Series Cylinders

MSAL/MTAL Series Cylinders

The MSAL/MTAL series comprises compact (mini) pneumatic cylinders manufactured by Shansi Automation (Ningbo) Group Co., Ltd. Available in single-acting and double-acting versions, they use compressed air and come in bore sizes of 20, 25, 32, and 40 mm. The operating pressure is 0.1~1.0MPa (14~145Psi) for double-acting models and 0.2~1.0MPa (26~145Psi) for single-acting models, with a pressure resistance of 1.5MPa (215Psi). Available strokes are approximately 0~150 mm; select operating speed and temperature according to the catalog curves. The compact cylinders are easy to install, either directly or using mounting accessories such as ES-type double-clevis spherical joints with mounting brackets (JA series, compatible with 32~125 mm cylinder bores). They are suitable for light-duty linear motion in automated equipment, including clamping, pushing, lifting, and positioning. When selecting a model, first determine the bore from the required force, then choose single-acting or double-acting operation, and finally select the stroke and mounting accessories to suit the available space.

MA Series Mini Cylinders

MA Series Mini Cylinders

MA series mini cylinders are compact pneumatic actuators available in MA, MAC, MACJ, MSA, and MTA variants. They are suitable for short-stroke operations such as clamping, pushing, and positioning in automated equipment. The cylinder body is made from high-precision stainless steel tubing, and the front and rear covers have fixed bumpers to reduce impact when the direction changes. The compact piston seal uses a single- or double-seal design. Operating pressure is 0.1–1.0 MPa for double-acting models and 0.2–1.0 MPa for single-acting models, with a proof pressure of 1.5 MPa and a temperature range of -20–70℃. Operating speed is 30–800 mm/s for double-acting models and 50–800 mm/s for single-acting models. Options include a magnet, CA/CM/U rear covers, FA/SDB mounting accessories, and PT/NPT/G threads. Custom strokes are available.

MA/MAC Series Mini Cylinders

MA/MAC Series Mini Cylinders

MA/MAC series mini cylinders comply with the manufacturer's standard and include MA (double-acting), MAC (double-acting, adjustable and serviceable), and MSA/MTA (single-acting) models. The piston uses a compact single- and double-seal structure with elastic properties. Fixed bumpers on the front and rear caps reduce impact during direction changes. Multiple rear cap styles simplify installation. The front and rear caps have stainless steel protective layers, while the cylinder barrel is made of high-precision stainless steel tubing for high strength and corrosion resistance. The working medium is air. Operating pressure is 0.1–1.0 MPa for double-acting models and 0.2–1.0 MPa for single-acting models; proof pressure is 1.5 MPa. Operating temperature is -20–70 °C. Operating speed is 50–800 mm/s for single-acting models and 30–800 mm/s for double-acting models. Bore sizes are 16, 20, 25, 32, 40, 50, and 63 mm. The standard stroke range is 0–150 mm; contact the manufacturer for special strokes. CA/CM/U rear caps, FA/SDB mounting accessories, and PT/NPT/G thread types are available as options. The product specifications state that all models in this series are non-magnetic; however, the ordering code also lists an S option with a magnet. Please confirm with the manufacturer when ordering.

MA/MAC/MSA/MTA Series Mini Cylinders

MA/MAC/MSA/MTA Series Mini Cylinders

The MA/MAC/MSA/MTA series mini cylinders are compact pneumatic actuators manufactured to the company's standard. The piston uses a compact single- or double-seal design with elastic compensation. Fixed bumpers on the front and rear end caps reduce impact during direction changes. Multiple rear end cap styles (single-pressed, round-pressed, and flat-pressed) and mounting accessories (front and rear end cap connecting plates and rear end cap mounting brackets) make installation easy. The cylinder body is made of high-precision stainless steel tubing for high strength and corrosion resistance. The front and rear end caps have stainless steel protective layers and provide reliable connections. The operating medium is air. Operating pressure is 0.1–1.0 MPa for double-acting models and 0.2–1.0 MPa for single-acting models, with a pressure resistance of 1.5 MPa. Operating temperature is -20–70℃. Operating speed is 30–800 mm/s for double-acting models and 50–800 mm/s for single-acting models. Bore sizes are 16/20/25/32/40 mm, with M5×0.8 or PT1/8 ports and a choice of PT/NPT/G thread types. MAC/MACD/MACJ models have adjustable cushioning; all others use bumpers.

MTA Series Mini Cylinders

MTA Series Mini Cylinders

MTA series mini cylinders are single-acting stainless steel cylinders (single-acting exhaust type) with bore sizes from 16~40 mm (up to 63 mm for certain models). They are suitable for automated gripping, pressing and positioning in confined spaces. The working medium is air. Single-acting models have an operating pressure of 0.2~1.0 MPa, a proof pressure of 1.5 MPa, an operating temperature of -20~70℃ and a speed of 50~800 mm/s. Fixed cushions on the front and rear covers reduce impact when the cylinder changes direction. The high-precision stainless steel cylinder tube offers high strength and corrosion resistance, while stainless steel protective layers on the front and rear covers ensure secure connections. Multiple rear cover styles are available (single-press, round-press and flat-press), along with mounting accessories (front and rear cover connecting plates and rear cover mounting brackets). Thread options are PT, NPT and G. The ordering code specifies the model, bore, stroke, magnet code, rear cover style, mounting type and thread code. The catalog states that all cylinders in this series are supplied without magnets. Contact the manufacturer for special strokes.

MG Series Cylinders

MG Series Cylinders

MG series cylinders are pneumatic actuators available in bore sizes of 6, 10, 16, 20, 25, 32, 40, 50 and 63 mm. Small bore sizes (6~16 mm) use a double-acting design, with a maximum operating pressure of 0.7 MPa and a minimum of 0.12 MPa. Medium and large bore sizes (20~40 mm) are available in a single-acting design, with a maximum of 1.0 MPa and a minimum of 0.18/0.23 MPa. The operating temperature is -10~70℃, and piston speed is 50~750 mm/s. Rubber or air cushioning is available. The cylinder body and end caps are generally made of aluminum alloy, while the piston rod is made of S45C hard alloy/stainless steel. Magnetic switches are optional. Standard stroke ranges vary by bore size, up to a maximum of 500 mm. Mounting dimensions are also provided.

MSG/MTG Series Cylinders

MSG/MTG Series Cylinders

MSG/MTG series cylinders are pneumatic actuators available in six bore sizes: 20, 25, 32, 40, 50, and 63 mm. They are offered in single-acting and double-acting versions. The working medium is air filtered through a mesh rated at 40 μm or greater. The operating pressure range is approximately 0.15~1.0 MPa, the proof pressure is 1.5 MPa, and the operating temperature range is -20~70℃. Standard strokes generally do not exceed 200 mm for smaller bores or 300 mm for larger bores; long-stroke versions are available up to 500 mm. The cylinders consist of a front cover, rear cover, piston rod, shock-absorbing sleeve, impact cushion, magnet, and lubricating alloy components. They are suitable for pushing, clamping, and positioning in automated equipment. Select a model using the bore, stroke, and mounting dimension charts.

MGC/MGCD Series Cylinders

MGC/MGCD Series Cylinders

The MGC/MGCD series consists of standard cylinders with bore sizes of 20, 25, 32, 40, 50 and 63 mm, available in single-acting and double-acting versions. The operating medium is compressed air filtered through a 40μm or larger filter mesh. Operating pressure is 0.15~1.0MPa, guaranteed proof pressure is 1.5MPa, and operating temperature is -20~70℃. Standard stroke ranges are ≤200mm for bore size 20 and ≤300mm for bore sizes 25~63; long-stroke ranges are 201~500mm and 301~500mm, respectively. Major components are made from carbon steel, NBR, TPU, aluminum alloy and S45C hard alloy. The design includes impact-absorbing pads and magnets, making these cylinders suitable for linear push-pull, clamping and positioning applications in automated equipment.

ISO 6432 Standard Cylinder

ISO 6432 Standard Cylinder

A standardized cylinder compliant with European standards ISO 6432 and CETOP RP52P, designed for linear pneumatic actuation in automated equipment. The catalog lists six bore sizes: 20, 25, 32, 40, 50 and 63 mm. Short and long strokes are specified separately: for the 20 bore, short strokes are ≤200 mm and long strokes are 201-500 mm; for 25, 32, 40, 50 and 63 bores, short strokes are ≤300 mm and long strokes are 301-500 mm. The page also lists mounting and overall dimensions, including C, CD, CZ, L, RR, TT, TV, TZ and Z, to help select a cylinder by bore and stroke and verify the mounting configuration. For long strokes, some dimensions are shown in parentheses.

SDB Series Connecting Mounting Bracket

SDB Series Connecting Mounting Bracket

The SDB connecting mounting bracket is a mounting accessory for cylinders conforming to the European standards CETOP RP52P and ISO 6432. It securely fastens the cylinder to a frame or machine body, providing rigid mounting and stroke alignment. It accommodates six cylinder bore sizes: 20, 25, 32, 40, 50 and 63. Specifications are distinguished by transverse and long stroke: the transverse stroke is ≤200 for bore 20 and ≤300 for bores 25~63; the long stroke range is 201~500 for all sizes. The catalog provides overall and mounting dimensions including C, CD, CZ, L, RR, TT, TV, TZ and Z, with dimensions for long strokes shown in parentheses. The original notes state: “The values in ‘C’ are dimensions for long strokes; the SDB connecting mounting bracket includes P/N: the values in ‘Y’ are dimensions for long strokes.” To select a bracket, refer to the row corresponding to the cylinder bore and stroke range for the mounting dimensions.

CJ Series Single-Acting Cylinders

CJ Series Single-Acting Cylinders

The CJ series comprises single-acting miniature cylinders available in three bore sizes: 6, 10 and 16mm. Two operating types are available: spring return and spring extend. The working medium is air, with a maximum operating pressure of 0.7MPa, a minimum operating pressure of 0.25MPa, a piston speed of 50~750mm/s and a stroke tolerance of 1.0mm. Ambient operating temperature depends on the magnetic switch configuration: -10~70℃ without a magnetic switch and -10~60℃ with one. The compact cylinder is suited to light-load, short-stroke applications such as small fixtures, positioning and pushing. Parts, including cylinder bodies, end caps, nuts and accessories, are available under separate part numbers. Select a cylinder based on bore size, operating type (spring return/extend), stroke and magnetic switch requirements. Replacement parts can also be ordered individually by part number.

Compact Cylinder

Compact Cylinder

The compact cylinder is a flat-profile pneumatic actuator with an overall length just 1/2~1/3 that of a standard cylinder, making it suitable for installations with limited space. The cylinder body has integrated slots for securing and adjusting magnetic switches. Recessed mounting saves space without additional accessories and simplifies installation and maintenance. Bore sizes are 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100 mm. The working medium is air, with an operating pressure range of approximately 1~9 kgf/cm², a guaranteed pressure resistance of 13.5 kgf/cm², an operating temperature of -5~70°C and an operating speed of 50~500 mm/s. Cushioning is provided by bumper pads. Port sizes range from M5×0.8 to PT3/8, and standard strokes range up to 30~130 mm depending on bore size. Mounting accessories such as trunnions and trunnion brackets are available.

SDA Series Compact Cylinders

SDA Series Compact Cylinders

SDA series compact cylinders are pneumatic actuators with a short axial length and compact construction, suitable for installations where space is limited. They are used for lifting, clamping, pushing and positioning workpieces. The series includes SDA (standard) and SDAS (magnetic, compatible with magnetic switches for piston position detection) versions, with 10 bore sizes from 12mm to 100mm: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100. The catalog provides overall and mounting dimensions for each bore size in outline dimension drawings (millimeters), including dimensions for standard and magnetic versions, B1, D, E, F, G, K1, L, M, N1 and N2, as well as dimensional differences for strokes St=5 and St>5. The M column specifies the cylinder body/mounting thread, from M3×0.5 to M10×1.5; for the 100 bore size, it is N18×1.5. Select the bore size based on the required thrust, the stroke based on the operating distance, and the standard or magnetic version based on whether position detection is needed.

SDAS Series Compact Cylinder with Magnet

SDAS Series Compact Cylinder with Magnet

The SDA and SDAS series are compact, double-acting cylinders. The SDAS is a magnetic version with a magnetic ring inside the cylinder, allowing magnetic switches to be mounted in the cylinder grooves for piston position detection. Ten bore sizes are available: 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100 mm. The cylinder body is made from extruded aluminum alloy, with a flat, compact design that significantly reduces installation space. Applications include fixture clamping, workpiece transfer, conveyor stopping, and positioning and lifting. Mounting holes around the end covers allow direct mounting from the end or side, while accessories enable trunnion, flange, and other mounting configurations. Inlet and exhaust port threads vary by bore size, from M3×0.5 to M18×1.5. The operating medium is filtered compressed air; operating temperature and stroke ranges should be determined from the specification table for the selected bore size. The magnetic SDAS provides position detection while retaining the compact dimensions of the standard SDA, making it an upgraded option.

SSA/SSAS Series Cylinders

SSA/SSAS Series Cylinders

SSA/SSAS cylinders are pneumatic actuators. This page provides their overall and mounting dimensions, along with those of the similarly constructed STA/STAS models. Eight bore sizes are available: 12, 16, 20, 25, 32, 40, 50 and 63 mm. Models are available without magnets (SSA, STA) or with magnets (SSAS, STAS). Magnetic models have switch mounting grooves in the cylinder body for installing sensors to detect stroke position. The catalog lists overall dimensions A, C, B1, D, E, F, G, K1, L and M, as well as mounting hole and air port dimensions O, P1, P3, P4, R, S, T1, T2, V, W, X and Y, separately for strokes of ≤10mm and >10mm. Air port threads increase from M5×0.8 to PT1/8 and PT1/4 as the bore size increases. Mounting hole combinations range from a φ4.2 through hole with an M5×0.8 thread to a φ6.5 through hole with an M8×1.25 thread. Larger-bore cylinders also have locating holes, supporting various mounting orientations, including horizontal and vertical installation.

STA/STAS Series Cylinders

STA/STAS Series Cylinders

STA/STAS series cylinders are pneumatic actuators for factory automation. The catalog page also lists the STA, STAS, SSA, and SSAS models. Available bore sizes are 12, 16, 20, 25, 32, 40, 50, and 63 mm, with magnetic and non-magnetic versions and two stroke ranges: ≤10 mm and >10 mm. The table provides overall and mounting dimensions such as A, C, B1, D, E, F, G, K1, L, M, and N2, as well as port and mounting hole parameters such as O, P1, P3, P4, R, and S, making it easy to select a cylinder by bore and stroke.

SDAJ Series Dual-Rod Double-Acting Adjustable Ultra-Thin Cylinder

SDAJ Series Dual-Rod Double-Acting Adjustable Ultra-Thin Cylinder

The SDAJ series of dual-rod, double-acting, adjustable ultra-thin cylinders includes two basic models: SDAJ without a magnet and SDAJS with a magnet. The series features dual-rod guidance, double-acting operation, and an adjustable stroke, making it suitable for automated applications with limited installation space that require short-stroke pushing or clamping. The catalog provides overall and mounting dimensions for bore sizes of 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100 mm. The stroke and adjustment stroke are specified when ordering. Piston rod thread options are female thread (blank), male thread (B), and unthreaded (N). The ordering code consists of SDAJ/SDAJS, bore size, stroke, adjustment stroke, and thread type, for example, SDAJS-20×30-25 and SDAJ-63×75-50-N.

SDAT Series Double-Acting Multi-Position Magnetic Cylinder

SDAT Series Double-Acting Multi-Position Magnetic Cylinder

The SDAT series double-acting multi-position magnetic cylinder features an ultra-thin dual-rod design. It combines stroke 1 and stroke 2 to provide multiple stop positions, making it suitable for automated applications requiring multi-point positioning, clamping, and pushing. The double-acting cylinder is available with an optional magnet (S) for use with magnetic switches to detect piston position. Bore sizes include 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100 mm. Piston rod thread options are female thread (blank), male thread (B), and unthreaded (N). The compact cylinder has standardized mounting dimensions and can be used with a variety of magnetic switches and mounting accessories.

SDAW/SDAWS Series Twin-Rod Short-Stroke Cylinders

SDAW/SDAWS Series Twin-Rod Short-Stroke Cylinders

The SDAW/SDAWS series comprises short-stroke cylinders: SDAW twin-rod and SDAWS single-rod models. They use compressed air and are available in double-acting or single-acting (spring-return/spring-extend) configurations. Bore sizes are 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100mm. Maximum operating pressure is 1.5MPa (15.3kgf/cm²), operating temperature is 5~60℃, piston speed is 50~500mm/s, and stroke tolerance is approximately ±10mm. No additional lubrication is required. The rod end has a female thread as standard, with a male thread available as an option. Through-hole mounting is standard, with female threads at both ends available as an option. Port sizes are M5×0.6, 1/8, 1/4 and 3/8. Models are available with a magnet (S) and with male threads (B) or no threads (N). They are suitable for precision clamping, positioning and pushing applications requiring a compact profile and twin guide rods to prevent rotation.

CQSB/CDQSB Series Compact Cylinders

CQSB/CDQSB Series Compact Cylinders

CQSB/CDQSB series compact cylinders are available in bore sizes of 12, 16, 20 and 25 mm, with double-acting or single-acting (spring return/spring extend) operation. The working medium is air. They have a proof pressure of 1.5 MPa, a maximum operating pressure of 1.0 MPa, an operating temperature range of -10~+60℃ and a stroke tolerance of ±1.0 mm. Female threads are standard and male threads are optional. The mounting holes serve as both through-holes and tapped end holes. The compact design is suitable for clamping, pushing, positioning and other automation applications where installation space is limited.

RQL/RDQL Series Foot-Mount Pneumatic Cylinders

RQL/RDQL Series Foot-Mount Pneumatic Cylinders

The RQL/RDQL series consists of foot-mount pneumatic cylinders with a single-rod, double-acting design. They use air as the working medium and operate at pressures of 0.05~1.0 MPa. Common bore sizes include 20, 25, 32/40, 50/63 and 80/100 mm. The rod end has an internal thread, and the cylinders are available with or without a magnetic switch. The operating fluid temperature is approximately -10~70℃, or -10~60℃ with a magnetic switch. Foot, frame and frame-side flange (RQF/RDQF) mounting options are available. The listed mounting accessories, CQS-L020, CQS-L025, CQS-F020 and CQS-F025, accommodate strokes of 15~50 mm, making it easy to secure and adjust the cylinder's position in automated equipment.